case study meat processing
TRANSCRIPT
8/10/2019 Case Study Meat Processing
http://slidepdf.com/reader/full/case-study-meat-processing 1/2
Food processing plant purifies air with Advantix
Europlast’s producon of sausage casings was
hindered by extreme humidity condions in its
manufacturing facility. To improve air quality and
control humidity, the company installed a DuCool
unit. The system enabled the company to be
more ecient and opmize condions in their
producon facility.
BACKGROUND
Ocially incorporated in 1982, Europlast is a German
company specializing in the producon of precise and
exactly dimensioned edible sausage casings. As a company
dedicated to the highest quality product, Europlast
ensures that its facility is clean and ecient and meets all
requirements of European Union food legislaon.
With its customer-driven policy, raw material and
extrusion knowledge, and problem-solving atude,
Europlast has grown to be an important player in the
European meat industry.
CHALLENGE
Europlast produces its casings in its Kunstdarme plant.
Resistant to cooking and sterilizing up to 2192°F, the
casings are stued either by hand or by an industrial
stung machine. Regulaon of moisture in this type
facility is extremely important to ensuring high quali
products. This can be a dicult task, since food processin
oen produces more moisture than exists naturally in th
environment.
During the summer months, the temperature in th
Kunstdarme plant was approximately 86°F. Since th
casings must be washed in temperatures of roughly 200°
the humidity level in the producon room oen reache
as high as 85%. When the washing pools were opened th
high level of moisture in the air put the facility at a high ris
of mold and mildew growth, and so they were oen force
to stop producon unl condions improved.
Dedicated to proper maintenance and sanitaon, th
Europlast team knew they needed to nd a soluon th
would keep their facility clean, comfortable, and health
They weighed various opons for controlling humidi
including a solid desiccant wheel. However, the upfro
cost and addional maintenance fees associated wit
wheel replacement proved too high.
Addionally, Europlast found that the desiccant whe
consumed a high amount of energy because of the ext
heat it used to dry the air. So instead they turned t
Advanx Systems’ liquid desiccant technology.
CASE STUDY Europlast
www.advanxsystems.com
8/10/2019 Case Study Meat Processing
http://slidepdf.com/reader/full/case-study-meat-processing 2/2
For more informao
email: [email protected]
phone: 305.503.044www.advanxsystems.co
ADVANTIX SOLUTION
Europlast installed a DuCool DT 3400 unit, which
allowed them to more precisely control the humidity in
the producon hall. The unit was placed outdoors and
installed to treat the area where the casings were washed
and boiled.
The DuCool unit dehumidies the space, prevenng the
growth of mold and mildew, and ensures a comfortableenvironment for the Europlast workers. The unit also
allows the facility to maintain the required humidity level
of 71°F and 50% R.H. for high performance, meaning
that they never again need to halt producon because of
dicult weather condions.
The DuCool unit also proves to be more aordable in
upfront, maintenance, and energy consumpon costs
than alternave dehumidicaon technologies like the
desiccant wheel.
Europlast is pleased with the eects of the new system, as
it has enabled them to improve their producon process
and maintain a sanitary facility.
“The DT unit is the best machine you can nd on the market
today,” said Lorenz Seifert, Europlast’s Technical Manager.
HOW IT WORKS
Advanx Systems’ cooling & dehumidicaon systems a
based on liquid desiccant’s natural removal of moistu
from air. This non-toxic, brine soluon cools, dehumidi
and cleans the air at the same me without ever needing
be replaced and without exing the system. When heate
the liquid desiccant releases the moisture back outsid
in the form of warm, vapor air, eliminang condensaofrom any point in the system. Liquid desiccant is also
natural disinfectant, eliminang bacteria, microorganism
and odor from the air in just one pass.
“The DT unit is the best machine you
can nd on the market today.”
Lorenz Seifert
Europlast’s Technical Manager.
www.advanxsystems.com