CustomDirect™ Case Submission Checklist forCAD Titanium Bars

Be sure to include:

1. Verified master model with removable soft tissues and new implant analogs

2. Wax try-in

3. Completed order form A. Include a completed order form with your case B. Enter the order information into the online case management application

Do NOT send articulators

CustomDirect 3050 E.Hillcrest Dr, Thousand Oaks, CA 91362. E-mail: order@custom-direct.com Fax: (818) 444-3401For Additional information on Implant Direct products, please go to www.implantdirect.com or call 888-649-6425

CAD Titanium BarsOrder Form

Case ID

Current Date

Requested Delivery Date

Account # PhoneAccount NameAddressCity, ST, ZipContact Dentist Technician Name Email Address

Please fill out all account information to ensure no delays occur with bar fabrication.

Case Information Account Information

Upper Jaw Lower Jaw

Case Submission Checklist

Verified master model with appropriateanalogs/replicas and soft tissue

Wax-up of teeth in their final restoration position

Implant Location= ODesired Attachments Location= XRestorative platforms supported: Implant Direct's Screw-Receiving abutment; ScrewIndirect, RePlant; Legacy; Swish;ScrewPlant; Nobel Biocare’s Multi-Unit abutment.

Bar Design Details

Y Bar

Hybrid

Notes:

I request a custom CAD Titanium Bar for a specific patient.

I Bar

Hybrid ML

Tapered Attachment

Hader

Fixed Bars Overdenture Bars

CustomDirect™otsuC tceriDmo ™t

Pawn

Distal Extentions:Rt: 4mm 8mm 12mm 16mmLt: 4mm 8mm 12mm 16mm

Distance from Tissue:00mm 1mm 2mm

For Overdenture Bars Only:Number of Attachments/Clips: 2 3 4 5 6Buccal/Lingual Wall Taper: 0° 2° 4° 6°

Use only new, undamaged analogs

Tapered Attachmentw/GPS included

(print name)

(Signature) (date)

Important Tip

To ensure an accurate fit, use only new implant analogs in your master model. A model with inadequate analogs cannot be processed and will be returned.

Designing Process

Once your case is received, it will be scanned and designed. You will receive an e-mail notification that your case is ready for viewing and you can download a 3D PDF to verify the design.

Upon review of the case design, you can note any changes needed via e-mail. Your case will be ready three business days following your approval.

Note: Any cases, changes or approvals received after 1 p.m. PST will be considered as the next business day.

Delivery

Each CAD titanium bar is polished, ready for try-in and includes required fixation screws.

1. All CustomDirect CAD Bar orders must be submitted through our online ordering process. 2. Custom bar product information and bar submission documents should be reviewed before submitting an order online. They can be obtained from www.custom-direct.com3. Please use this document and our bar submission checklist as a reference for case submission and applicability.4. Case work flow: A. Online case order entry: B. Ship case master cast and denture set-up only to CustomDirect. Implant Direct 3050 E. Hillcrest Drive. Thousand Oaks, CA 91362 - Please use protective packaging. Include a copy of the Implant Direct order summary. C. A bar design type must be selected although may be altered after design review. D. Upon receipt of the case, customer will be notified. Please provide a valid e-mail address. E. Initial designs will be provided within three full working days of case receipt. F. All CAD bars must be approved by laboratory or clinicians prior to production. G. Finished bars will be invoiced and shipped within three days after case approval. H. Please place all enclosed documents in a Ziploc bag. Disinfect all casts and set-ups using accepted infection control practices. 5. Laboratory work authorization: A. Custom CAD bars are custom laboratory products. As such, all case submissions must include a signature on the order form. 6. Case Approval: A. All bar cases are scanned and designed in our facility. Cases transition to ‘on-hold’ status until a design approval is received from the laboratory or clinician. B. Because CAD bar cases require specialized knowledge for design, approval and processing, CustomDirect recommends that clinicians and laboratories work collaboratively with respect to bar design.7. The following situations will prompt case rejection: A. Implant divergence of greater that 40 degrees. B. Analogs that are damaged or covered with stone. Soft tissue casts preferred. C. Cases where denture set-ups do not fit securely on the master cast.8. Warranty: Implant Direct warranties CustomDirect CAD Bars to fit precisely on the supplied master cast. Implant Direct warranties Titanium CAD Bars for a period of five years against failure due to defective materials, design and manufacturing only.

Custom Direct CAD Titanium Bar Case Submission Instructions