7/25/2019 cast_equa

1/2

Cast Puzzles

HANAYAMA Co., Ltd.

* This document may not be copied or used in any way without prior

The above illustrations are provided for the purpose of solving the puzzle. Note thatHanayama Toys Co., Ltd. cannot accept telephone calls requesting explanations related tothe mechanism of the puzzle.

Frame

Ring B

Clip B

Clip A

Ring A

Clip A

Clip B

The rings can be moved out of position for the

distance that the clips are moved to the oppositeside of the frame. Move the clips upward if they

are at the bottom of the frame and downward if

they are at the top of the frame to set the rings in adifferent location.

Once the rings are able to move freely within theframe, locate the thinnest part of the frame

(there is one part that is clearly thinner than the

rest of the frame.)

Moving the rings to various positions within theframe.

Move the position of the clips towards the center

of the frame for both Rings A and B

Pull both rings in the direction of the frame torelease them.

The names of the puzzle parts are shown below.

Position the thinnest part on the left-hand sidewhen seen from the top.

Move the HANAYAMAlogo to position

.

Move the HANAYAMAlogo to position .

Move clip B to the center of the frame.

Raise ring A

Allow clip B to drop to the bottom of the frame Move the protruding area of ring B to position

Protruding area

Protruding area

At the same time, move ring A so that it is

protruding slightly from the frame.

Solving the Cast Equa Puzzle 1

3

3

3

2

2

2

1

1

1

7/25/2019 cast_equa

2/2

Cast Puzzles

HANAYAMA Co., Ltd.

* This document may not be copied or used in any way without prior permission.

The above illustrations are provided for the purpose of solving the puzzle. Note thatHanayama Toys Co., Ltd. cannot accept telephone calls requesting explanations related tothe mechanism of the puzzle.

$MJQ"

$MJQ#

Move the HANAYAMA

logo to position

.

.

Protruding area

Solving the Cast Equa Puzzle 2

Rotate ring A.

At the same time, move ring B so that it fitswithin the frame.

Rotate ring A.At the same time, move ring B close to the frame.

Angle ring A towards position while raisingit at the location where it is almost fitted into theframe.

At the same time, gently nudge ring B towardposition .

This will enable ring A to be removed from theframe.

Rotate rings A and B. Remove them.

2

2

3

1

3

2

1

1

2

3

2

33

11

http://www.puzzlemaster.ca/?coupon=equa_solution