cat a logo

8 1-800-752-4626 www.increte.com

1-800-752-4626 www.increte.com 9

1-800-752-4626 www.increte.com10

1-800-752-4626 www.increte.com 11

1-800-752-4626 www.increte.com 13

1-800-752-4626 www.increte.com 15

1-800-752-4626 www.increte.com 17

18 1-800-752-4626 www.increte.com

1-800-752-4626 www.increte.com 19

1-800-752-4626 www.increte.com 21

1-800-752-4626 www.increte.com 23

1-800-752-4626 www.increte.com 25


Item # Colors Size

See Colors 10 Standard Colors 35 LB. (16kg) Pail

HARDENER & RELEASES

Item # Colors Size

See Colors 30 Standard Colors 60 LB. (27.3 kg) Pail

Custom Colors/Color Matching. Available in bags upon request.

Color HardenerINCRETE SYSTEMS’ Color Hardener is a ready-to-use

dry-shake powder used to color and harden freshly

placed concrete for stamping and other decorative surfaces.

Color Hardener is comprised of a pre-tested cement, hard, wear-re-

sistant specially-graded silica quartz aggregate, finely ground alkali

and light fast inorganic coloring pigments, and other propriety com-

ponents which improve the finished concrete surface. Color Hard-

ener builds in color and durability increasing the surface strength to

over 8000 psi.

Color Hardener provides: a more uniform and intensely colored sur-

face; an easy-to-clean surface that is resistant to grease, oil, and

water penetration; greater resistance to weathering, freezing and

thawing, and scaling from alkali salts.

Color Hardener may be used both indoors and out and is recom-

mended for floor surfaces subject to medium to heavy duty use

such as shopping centers, hotels/motels, garages, schools,

sidewalks, driveways and parking lots.

� Uniform Color

� Decreases Maintenance

� UV & Alkali Resistant

� Increases Durability

For Complete Selection Of Standard Colors, See Page 42

� Greater Stamping Efficiency

� Releases Stamping Tools

� Adds Color & Depth.

� Unlimited Design Options

For Complete Selection Of Standard Colors, See Pages 42

Color ReleaseINCRETE SYSTEMS’ Color Release is formulated to pro-

vide a barrier between stamping tools and wet concrete to prevent

suction and facilitate the release of flexible stamping tools.

Applied directly to the wet concrete surface prior to stamping, ColorRelease contains integrated iron-oxide pigments to add color and

depth to a stamped surface.

Available in Increte Systems’ 30 standard colors, Color Release isalso available in light and dark gray or brown, and

clear. Special colors can be matched by request.

Item # Colors Size

See Colors- 30 Standard Colors 20 LB. (9.1kg) Pail

For Complete Selection Of Standard Colors, See Pages 42

Antique ReleaseAntique Release, like Color Release is formulated to

provide a barrier between stamping tools and wet

concrete to prevent suction and facilitate the release

of flexible stamping tools.

1-800-752-4626 www.increte.com 27

INTEGRAL COLOR

Item # Colors Size

See Colors 35 Std. Colors 1LB 5LB 25 LB. (.45kg 2.3kg 11.4kg)

Custom Colors and Color Matching Available

CONCRETECONCRETE COLOR SYSTEMS COLOR SYSTEMS

Color-Crete TM (Powder)COLOR-CRETE powder integral color is an admixture ofspecial synthetic iron-oxide pigments specially formulatedto color and beautify concrete. Available in 35 standard colors andexceeding ASTM C979 specifications for integral color, COLOR-CRETE may be used with all cementitious materials and is de-signed for use with cast-in-place, slab on grade, precast, tilt-up,pavers and roof tiles. Plus, all colors are light-fast, lime-proof, andcompletely weather proof assuring permanent colorfast structures.

COLOR-CRETE is available in a variety ofBatch-ReadyTM disintegrating bags, each con-taining a precise measurement of pigment toprovide totally uniform color and reduce colorvariations.

� Batch-ReadyTM Mix

� Disintegrating Bag

� UV-Resistant

� Exceeds ASTM C979


� Packaged in convenient 1-yard Increments

� Dust Free

� Lime-Proof

� UV-Resistant

� Uniform Mixes

� Exceeds ASTM C979


Color-CreteTM

(Pre-Packaged Liquid)INCRETE SYSTEMS’ COLOR-CRETE liquid integral color is a

water-based, ready-to-use pigmented slurry of special synthetic

iron-oxide pigments.

Produced using a computer-controlled blending of precisely pre-

mixed liquid components, COLOR-CRETE liquid is formulated from

the same superior grade pigments as COLOR-CRETE powder

and provides the high tinting strength and uniform color that ex-

ceeds ASTM C979 specifications for integrally colored concrete.

COLOR-CRETE may be used with all cementitious materials and

designed for use with cast-in-place, slab on grade, precast, tilt-up,

pavers and roof tiles. Plus, all colors are light-fast, lime-proof, and

completely weather proof assuring permanent colorfast structures.

COLOR-CRETE liquid color is conveniently packaged in one yard

increments in 1, 3.5 & 5 gallon pails containing a precisely pig-

mented slurry accurate to within .02 of a pound to provide uniform

color and perfect future batch matching if required.

Color-Crete TM 7 for 28 Color-Crete 7 for 28 powder integral color is a

pre-measured system packaged in convenient

disintegrating plastic bags that achieves 28 shades with

variable loadings for 7 standard integral base colors.

Item # Colors Size

See Colors 7 Standard Colors 6 LB (2.7kg) Bag

For Complete Selection Of Standard Colors, See Page 42 Item # Colors Size

See Colors 35 Standard Colors One-Yard Increments


FINISHING AIDSINCRETE DELAY

Increte Delay forms a monomolecular invisible film to pre-

vent the rapid loss of moisture from the concrete surface

during high temperatures, extreme wind, and low humidity.

It reduces the chances of cracking due to these quick dry-

ing conditions.

Increte Delay negates the need for extra mix-

ing water and aids in the proper application

of dry shake-on hardeners. It will not affect

the bonding of cures or coatings, nor alter the

final color of the concrete.

CEMENT RETARDERINCRETE SYSTEMS’ Cement Retarder is a specially formulated

retardant that delays the set times in cementitious

products. Cement Retarder is designed for use

with Increte Systems” Increte, Color-Crete, New-Crete, Texture-Crete and Spray-Deck.

FINISHING AIDSFINISHING AIDS

LIQUID RELEASEINCRETE SYSTEMS’ Liquid Release is a specially formulated sol-

vent based releasing agent designed to prevent suction between

stamping tools and wet concrete to facilitate the release of flexible

tools.

Used in situations where a dry-shake release is

too dusty to use, Liquid Release is ideal for inte-

rior use and is fragrence-free and non-irratating

to nasal passages.

For best results, It is recommended that LiquidRelease be sprayed on the underside of the

stamping tool prior to stamping.


Item # Size

CLRB G001 000 1Gal. (3.8L) Can

CLRB G005 000 5 Gal. (18.9L) Pail

Item # Size

CIDE G001 000 1 Gal. (3.8L)

CIDE G005 000 5 Gal. (18.9L) Pail

Item # Size

CCRT G001 000 1 Gal. (3.8L)

CCRT G005 000 5 Gal.(18.9L) Pail

Trowel GlideTROWEL-GLIDE is an easy-to-use waterbase finishing aid usedto smooth concrete finishes and reduce the chance of surfacecracking. The use of TROWEL-GLIDE will also create an invisible

film to prevent rapid moisture loss from the concretesurface during high temperatures, extreme wind andlow humidity.

� Aids In Creating Smoother Troweled Surfaces

� Reduces Stickiness

� Extends Finishing Time

Item # Size

CTRG G001 000 1 Gal. (3.8L)

1-800-752-4626 www.increte.com 29

Item # Colors Size

See Colors 30 Standard Colors 1 Lb. (.45kg) Bag

STAMPED OVERLAY PRODUCTSThin-CreteTM (Tintable)Stamped Overlay Grout

Thin-Crete Grout is an easy-to-use tintiable polymer-modified,cementitious-based, single-component grout designed for use onnew or worn concrete substrates. Thin-Crete stamped overlayoffers the texture, look, feel and durability of stamped concrete.

Thin-Crete’s polymer modification provides excellent adhe-sion, toughness, and long-term durability makng it an idealsolution to renovate or revitalize existing interior or exterior con-crete surfaces, and do so without the time and expense of removal.

Bond-CreteTM

INCRETE SYSTEMS’ Bond-Crete is a high strength bonding

agent with a high solids content for increased

durability. Its unique co-polymer penetrates into

an existing concrete surface to provide excellent

bonding with an overlay grout such as Thin-Crete, New-Crete or Micro-Crete.

Bond-Crete is the ideal choice for bonding

concrete caps, stair facings and anytime a

new surface is poured over an existing one.



� Eliminates Removal Of Existing Structurally Sound Concrete

� Greater Durability & Surface Strength

� Single Component Tintable Formula

� Eco-Friendly formula mixes with water

� Cures up to 6000psi

� Ideal for use with concrete stainsAntiquing Agent

INCRETE SYSTEMS’ Antiquing Agent is a unique

coloring agent which, when dissolved in water, provides

stunning accents to Thin-Crete or stamped concrete. These col-

orants are designed to tint grout lines and

stamped impressions without affecting the base

color of Thin-Crete. While Antiquing Agentis formulated to use with stamped Thin-Crete,it may also be used to highlight any

stamped concrete surface prior to sealing.

Item # Colors Size

See Colors 30 Standard Colors 5 Lb. (2.3kg) Pail



Item # Size

CBCR G001 000 1 Gal. (3.8L) Bottle

CBCR G005 000 5 Gal. (18.9L) Pail

Special Order in 50 lb. Pails

Custom Order Pre-Colored

STAMPED OVERLAY PRODUCTSSTAMPED OVERLAY PRODUCTS

Item # Size CTCG P050 000 50 Lb.(22.7kg)

Thin-CreteTMColor PackConvenient pre-measured color for tinting Thin-Crete Grout. Simply add contents into grout whenmixing for perfect color everytime.

SPRAYED OVERLAY PRODUCTS SPRAYED OVERLAY PRODUCTS


Item # Colors Size

See Colors 5 Standard Colors 50 Lb.(22.7kg) Bag

SPRAYED OVERLAY PRODUCTS


Spray-Deck/

Texture-Crete GroutSpray-Deck Grout is a premixed cement and extra-fine

aggregate blended to be used with Spray-Deck/Texture-CreteResin for maximum strength and durability. Spray-Deck Grout is the

perfect solution for covering unsightly concrete surfaces.

Spray-Deck Grout when applied as a second layer (Texture-Crete)

with pattern stencils (see page 32) can provide

the look of brick, tile, cobblestone, and a variety

of other patterns. Custom stencils can beused

to create specific shapes and custom logos.

Spray-Deck/Texture-Crete ResinSpray-Deck Resin is a specially formulated concentrated co-poly-

mer resin for all Spray-Deck/Texture-Crete Systems. This admix-

ture when added to grout provides high strength

and mechanical bond, freeze/thaw resistance,

and good chemical resistance. Proven to provide

long-term durability for exterior exposure, and can

be utilized with a variety of substrates.

� High Strength and Mechanical Bond

� Use With A Variety of Substrates

� 5 Standard Colors

� Premixed For Strength & Durability

� The Perfect “Cover-Up”

� Creates a Non-Slip Surface

� Ideal for use with Concrete Stain

Item # Colors Size

See Colors 30 Standard Colors 1 Qt. (.95L) Bottle


� 30 Standard Colors

� Ready To Add To Grout

Liquid DispersionLiquid Dispersion grout colorant contains carefully com-

bined, computer specific combinations of coloring agents

to provide a variety of base layers colors for such sys-

tems as Increte Systems’ Texture-Crete. Liquid Dis-persion grout colorant is UV resistant and will not fade,

the prescribed amount of colorant and base grout

color is specified on each container.

Item # Size

CSDR G001 000 1 Gallon Bottle

CSDR G005 000 5 Gallon Pail

Companion ProductsSpray-Deck/Texture-Crete Resin Increte Weld LV

Concrete Stain Liquid Dispersion Pattern Stencils

Increte Weld LV Crack RepairIncrete Weld LV Crack Repair is a 2-part, 100% solids

moisture insensitive, rapid-cure epoxy compound. It is a

low viscosity formulation which develops high strength

and high modulus.

Item # Size

CWEL O010 000 10oz. (.6L) Tube

SELF-LEVELING/MICRO-TOPPING/VERTICAL OVERLAYSELF-LEVELING/MICRO-TOPPING/VERTICAL OVERLAY

1-800-752-4626 www.increte.com 31

SELF-LEVELING/MICRO-TOPPING/VERTICAL OVERLAYNew-Crete Self-Leveling Grout TM

INCRETE SYSTEMS’ New-Crete is an easy-to-use self-level-

ing polymer-modified, cementitious-based, single-component com-

pound designed for use on structurally sound interior concrete.

New-Crete’s acrylic polymer modification promotes excellent ad-

hesion, toughness, and long-term durability.

New-Crete offers fast set properties that allow for a walka-

ble surface in as little as 12 hours, and a stainable surface

in 24 hours. It is the ideal solution for interior floor resur-

facing in preparation for staining with a

variety of stains such as Increte’s

Stain-Crete, Stone Essence, ConcreteStain or Vibra-Stain. Thin-Crete Vertical Grout

Thin-Crete Vertical Grout is a single component sur-facing compound specially created for application on ver-tical surfaces. The light weight cementitious dry mixture has beenformulated to avoid sagging and running during application on ver-tical surfaces.

Thin-Crete Vertical is both strong and light weight. It can beapplied at a thickness of up to 2 inches, offer-ing the ability to create deep textures and nat-ural appearing surfaces without requiringadded reinforcement on structurally soundvertical surfaces.

� Formulated for Vertical use

� Resists Sagging

� Strong & Lightweight

� May be colored with a variety of Increte Systems’ stains

� Eliminates Removal OfExisting Concrete

� Self-Leveling

� Cures up to 4000psi

� Walkable In 12 Hours.

� Stainable In 24 Hours.

Item # Size

CNCR P050 970 50 Lb. (22.7kg) Bag (White)

CNCR P050 355 50 Lb. (22.7kg) Bag (Gray)

Micro-Crete Micro-ToppingMicro-Crete is a single component

cementitous polymer resin micro-topping

designed for interior and exterior application. Micro-Crete’s eco-friendly formula mixes with water for cre-

ating a smooth or broomed finish. Curing at 4000psi,

Micro-Crete allows re-surfacing of existing, struc-

turallly sound concrete surfaces.

Item # Colors Size

CMIC P040 970 White 40 Lb. (18.2kg) Bag

CMIC P040 355 Gray 40 Lb. (18.2kg) Bag

Item # Colors Size

CTCV P040 420 Light Gray 40 Lb. (18.2kg) Bag

CTCV P040 355 Gray 40 Lb. (18.2kg) Bag

Ideal for use with Increte Stains

Companion ProductsStain-CreteVibra-Stain

Stone EssenceConcrete Stain

STAINS & DYESSTAINS & DYES


Item # Colors Size

See Colors 9 Standard Colors 1 Gal. (3.8L)

See Colors 9 Standard Colors 5 Gal. (18.9L)Pail

STAINS & DYESStain-Crete (Acid Stain)

Increte Systems’ STAIN-CRETE Acid Stain is a deep penetratingacid-based chemical stain that can be used to color old or new con-crete (which has cured for a minimum of 14-28 days).

STAIN-CRETE chemically reacts with cured concrete, NEW-CRETE or MICRO-CRETE to provide a distinctive permanent colorwith a subtly shaded marbled effect similar to the look of agednatural stone. STAIN-CRETE’s variegated finish will not peel,crack, chip, or fade.

Because STAIN-CRETE penetrates so deeply, it can be used forboth interior and exterior applications. It can be applied to bothhorizontal and vertical surfaces giving an attractive custom look toany masonry surface that, once sealed, is impervious to alkali, saltsand salt spray, UV rays, and abrasion.

STAIN-CRETE is the ideal choice for residential, commercial or mu-nicipal applications such as basement floors and walls, garagefloors, sidewalks, driveways, pool decks, restaurants, commercialentrances, pedestrian walkways, and showrooms.

� Deep Penetrating

� Variegated Finish


� Won’t Chip, Peel or Fade


Item # Colors Size

See Colors 20 Standard Colors 1 Qt. (.95L) Bottle

StoneEssenceConcentrated TransparentStainIncrete Systems’ eco-friendly Stone Essence Transparent ConcreteStain is a concentrated concrete stain that penetrates to beautify

concrete surfaces with the mottled, variegated finish of an acid stain

without the negative impact of acid or VOC’s.

Ideal for interior or exterior applications, Stone Essence turns ordi-

nary concrete surfaces into elegant and inspiring works of art and

an ideal enhancement to any decor or landscape. In addition, as a

non-VOC, non-acid product, it can be applied in occupied dwellings

with clean-up that’s easy and safe..


� Eco-Friendly Formula

� Variegated Finish

� No Acids

� No VOC’s

� UV Resistant

� 1 Quart makes 1 Gallon of Stain

STAINS & DYES STAINS & DYES

1-800-752-4626 www.increte.com 33

Item # Colors Size

See Colors 30 Standard Colors 1 Gal. (3.8L) Pail


� Seals and Protects

� Easy Maintenance


� Increases Durability


STAINS & DYESConcrete Stain-Sealer

INCRETE SYSTEMS’ Concrete Stain is a solvent based stainsealer formulated with special acrylic resins designed to providedeep penetration for all concrete and masonry surfaces. The uniqueformula protects surfaces with long-lasting durability, resistance togrease and oil stains, will not fade, and is alkali proof. The special

resin system is designed to withstand hightraffic and wet or dry abrasion.

Vibra-Stain

Concentrated DyeVIBRA-STAIN is a uniquely blended solution of dyes that is dilutedwith water to create deeply penetrating vibrant semi-transparentcolor for concrete surfaces.

While it provides rich, deep vivid color, the dilution may be varied toachieve an array of desired shades, and multiple VIBRA-STAINcolors may be combined to offer a limitless palette of possibilitiesthat won’t crack, chip or peel.

Because VIBRA-STAIN produces brilliant vivid hues it is an idealchoice for use when creating polished interior concrete surfaces.

Vibra-Stain may be mixed with water, acetone or alcohol.

� Concentrated formula

� Unlimited Color Possibilities

� Brilliant, Vivid Colors

� Ideal for Polished Concrete

� For interior application only.

Item # Colors Size

See Colors 24 Standard Colors 8 Oz.(.47L) Bottle

For Complete Selection Of Standard Colors, See Page 43Item # Colors Size




Concrete Stain-Sealer(Water Based)IINCRETE SYSTEMS’ Water Based ConcreteStain offers the beauty of Concrete Stain in anEco-Friendly water based formula.

Also Available in LOW VOC Formula

Item # Patterns Size

See Pricing 15 Standard Patterns 4’ x 8’

Custom Logos and Patterns Available

OVERLAY & ADHESIVE STENCILSOverlay Pattern Stencils

INCRETE SYSTEMS’ pattern stencils, designed for use with Spray-

Deck and Texture-Crete, are manufactured from durable polypropy-

lene plastic offering long life and ease of cleaning or single-use

paper. Standard patterns come in a variety of styles from brick and

tile to random stone and fan designs. Custom patterns available.

Stencils are approximately 4’ x 8’.

Self-Adhesive Vinyl Stainand Sandblast StencilsWith INCRETE’S large array of self-adhesive stencils you can be

sure to find the right design or border style to add beauty, and extra

profit, to almost any interior or exterior application. If the job calls for

a custom design or logo, our computerized system can scan the

image and produce the stencil you require. Vinyl stencils are

backed with a non-invasive adhesive that won’t damage existing

surfaces, stay firmly in place, and are easily removed to provide

crisp clean images whether created with stains or sandblasting.

OVERLAY & ADHESIVE STENCILS OVERLAY & ADHESIVE STENCILS

Stencils for staining are

available in widths up to

48” (42” image)

Sandblast stencil width

is 30” (24” image)

Larger sizes are

are tiled sections.

1-800-752-4626 www.increte.com

Consult Stencil Catalog forStandard Patterns.

Custom Stencils Available.

34

Item # Size

See Pricing Varies with Pattern

Custom Designs and Logos Available

SEALERS & PROTECTIVE COATSEALERS & PROTECTIVE COATINGS INGS

Crystal Clear VOCINCRETE SYSTEMS’ Crystal Clear (VOC) is a low viscosity solvent

based Wet Look finish sealer that complies with all OTC VOC re-

quirements. Crystal clear, fast drying, and deep penetrating, Crys-tal Clear (VOC) can be used to seal and

protect any Increte Systems surface as well as

all other masonry surfaces.


SEALERS & PROTECTIVE COATINGS

35

Clear Seal (Solvent Based)INCRETE SYSTEMS’ Clear Seal is a pure acrylic crystal clear, non-

yellowing sealer. Clear Seal can be used to seal any Increte Sys-

tem, and is excellent for use on all other masonry surfaces. The

solvents incorporated into the Clear-Seal formula offer excellent

penetration and a breathable film that allows moisture in hardened

concrete to evaporate.

Clear-Seal is recommended for both inte-

rior and exterior surfaces, whenever out-

standing abrasion resistance is desired.

� Seals & Protects

� Beautifies & Enhances Decorative Surfaces

� UV & Weather Resistant

� Improved Wear Resistance

� Non-Yellowing & Breathable

Clear Seal 100 VOC*

Clear Seal 400 VOC* INCRETE SYSTEMS’ Clear Seal solvent and water-based seal-

ers are also available in two formulas with low VOC contents of

less than 100g/l and 400g/l.

Both Clear Seal 100 VOC and Clear Seal 400 VOC offer excel-

lent penetration while providing outstanding protection with a

beautiful Wet Look finish.

*Specially formulated for use in California

Item # Size

CCSO G001 000 1 Gal. (3.8L)

CCSO G005 000 5 Gal. (18.9L)

Item # Size

CCSF G001 000 1 Gal. (3.8L)

CCSF G005 000 5 Gal. (18.9L)

Clear Seal 100 VOC Clear Seal 400 VOC

Item # Size

CCSS G001 000 1 Gal. (3.8L) Can

CCSS G005 000 5 Gal. (18.9L) Pail

Item # SizeCCCV G001 000 1 Gal. (3.8L) Can

CCCV G005 000 5 Gal. (18.9L) Pail

Clear Seal (Water Based)INCRETE SYSTEMS’ Clear Seal (Water Based) is an

odorless, non-flammable sealer that provides

a crystal clear finish. It is the ideal sealer choice

for indoor applications, and can be used to seal

and protect any Increte Systems surface as

well as all other masonry surfaces.

Item # Size

CCSW G001 000 1 Gallon (3.8L) Can

CCSW G005 000 5 Gallon (18.9L) Pail

VOC<350g/l

� Seals & Protects

� OTC Compliant

� Super low viscosity

CURE-CRETEINCRETE SYSTEMS’ Cure-Crete is specially designed to provide

a quality cure and seal while assuring total resistance to yellowing

from ultra-violet exposure. Cure-Crete is particularly well suited for

curing and sealing exterior architectural con-

crete.

SEALERS & PROTECTIVE COATSEALERS & PROTECTIVE COATINGS INGS


CURE AND SEALS

36

CURE-CRETE PLUSINCRETE SYSTEMS’ Cure-Crete Plus is a high solids, high vis-

cosity solvent based curing and sealing compound specially de-

signed to cure new concrete. Cure-Crete Plus provides a glossy

non-yellowing seal to make the surface resistant to dirt penetration

and other staining, and is ideal for interior and exterior application.

CURE-CRETE PLUS VOCINCRETE SYSTEMS’ Cure-Crete PLUS VOC is a high solids for-

mula to provide highly efficient moisture retention, strength gain, and

excellent protection from liquids, weathering and abrasion. This

unique solvent blend delivers the performance

benefits of traditional solvent based curing and

sealing products while ensuring compliance with

VOC regulations.

Item # Size

CCCR G005 000 5 Gal. (18.9L) Pail (Clear)

CCCR G055 000 55 Gal. (205L) Drum

CURE-CRETE WB (Water-Based)

INCRETE SYSTEMS’ Cure-Crete WB is a specially formulated non-

yellowing water based cure and seal compound for use on new

concrete pours as a curing agent. Cure-Crete Water-Basedcomes in

a clear non-pigmented formula and may also be

custom blended to match any integral color pour.

Item # Size

CCUR G005 000 5 Gal. (18.9L) Pail

CCUR G055 000 55 Gal. (205L) Drum

Item # Size

CCUV G005 000 5 Gal. (18.9L) Pail

CCUV G055 000 55 Gal. (205L) Drum

Item # Size

CCUP G005 000 5 Gal. (18.9L) Pail

CCUP G055 000 55 Gal. (205L) Drum

CCUP C001 000 4X1 Gal. (3.8L) Case

37

Item # SizeCHGW G001 000 1 Gal (3.8L) Bottle

CHGW G005 000 5 Gal (18.9L) Pail

Item # Size

CEPK G003 000 3 Gal. (11.4L) Kit

High Gloss WaxHigh Gloss Wax is a clear, durable wax that resists surface abuse

when properly maintained and leaves a beautifully

lusterous finish. Heal mark, stain, and abrasion re-

sistant, Increte’s High Gloss Wax is easily buffable

and free from odors and fumes during application.

Low Gloss WaxINCRETE SYSTEMS’ Low Gloss Wax is, like Increte’s High GlossWax, is a clear, durable wax specially formulated to leave a softersatin finish for surfaces where a high gloss shine is not desired.

High Perf. Epoxy-PigmentedAvailable in 30 standard colors, INCRETE SYSTEMS’

High Performance Epoxy is a 100% solids performance

coating designed to provide high gloss, high build protection for con-

crete and masonry surfaces. As a 100% solids

coating, High Performance Epoxy has lower sol-

vent odor than typical industrial coating. This fea-

ture allows for use in occupied buildings. HighPerformance Epoxy is also easily buffable.

Custom Colors Available.

Item # Size

CLGW G001 000 1 Gal. (3.8L) Bottle

High Performance Epoxy-ClearINCRETE SYSTEMS’ High Performance Epoxy is a

100% solids performance coating designed to provide

high gloss, high build protection for concrete and masonry surfaces.

As a 100% solids coating, High Performance Epoxy has lower sol-

vent odor than typical industrial coating. This fea-

ture allows for use in occupied buildings. HighPerformance Epoxy is chemically resistant, anti-

microbial and easily buffable.

Both components packaged in a convenient

single pail.

SPECIALTY COATINGS


Paver SealerINCRETE SYSTEMS’ Paver Sealer is a solvent based,

acrylic, deep penetrating clear sealer specially

formulated for interlocking brick pavers. PaverSealer provides a glossy new look while

reducing staining. Paver Sealer is non-

yellowing with excellent UV resistance,

very durable, and will not peel or flake

when properly applied.

Item # SizeCPSA G001 000 1 Gal. (3.8L) Can

CPSA G005 000 5 Gal. (18.9L) Pail

SPECIALTY COATSPECIALTY COATINGS INGS

Item # Color Size

See Pricing 30 Standard Colors 120 Oz. (7.2L) Kit

See Pricing 30 Standard Colors 15 Gal. (56.7L) Kit


Paver Sealer VOCItem # Size

CPSV G001 000 1 Gal.(3.8L) Can

CPSV G005 000 5 Gal. (18.9L) Pail

Item # Size

CCKK G002 000 2 Gal. (7.6L) Kit

Item # SizeCUSK G001 000 1 Gal. (3.8L) Kit Item # Size

CUWK G001 000 1 Gal. (3.8L) Kit

Urethane (Kit)INCRETE SYSTEMS’ Urethane is the ultimate gloss finish for inte-

rior flooring. This two-component polyester polyurethane is light

stable (non-yellowing) while providing superior adhesion and

hardness with a chemically cured film that is

highly resistant to chemicals,

stains and abrasion.

W/B Urethane Kit (Water Based)

INCRETE SYSTEMS’ Water Based Urethane is a two-component

urethane coating with excellent wear and adhesion properties. Low-

odor and non-yellowing, Water BasedUrethanemay be applied directly to con-

crete, however the use of a primer is

recommmended.

As a top coating Water Based Urethanemeets all USDA guidelines for use in

federally inspected facilities.

Counter-KoteINCRETE SYSTEMS’ Counter-Kote is a Food & Drug

Administration compliant surface coating for food contact. Counter-Kote is a 100% solids clear epoxy system that provides a durable

surface with superb resistance to abrasion and chemicals.

Counter-Kote can be used on residential and

commercial concrete counter, bar, and table

tops.

SPECIALTY COATSPECIALTY COATINGS INGS

SPECIALTY COATINGS


56% Solids60% Solids � May be applied directly to Concrete - for optimal resultsapply an epoxy as primer

� Requires application of an epoxy primer coat.

39

Item # SizeCSOL G001 000 1 Gal. (3.8L) Can

CSOL G005 000 5 Gal. (18.9L) Pail

Item # SizeCGSA G001 000 1 Gal. (3.8L)

CGSA G005 000 5 Gal. 18.9L) Pail

Grease-A-WayINCRETE SYSTEMS’ Grease-A-Way is a concentrated degreaser

for concrete, stone, and masonry surfaces. This powerful de-

greasing solution provides a safe and econom-

ical means for cleaning up grease and oil stains,

wax, and dirt. Grease-A-Way is easily adjusted

to match the cleaning strength required.

Solv-KleenINCRETE SYSTEMS’ Solv-Kleen is a special blend of solvents

designed to clean spills and application equipment from Clear-Seal,

pigmented solvent base stains and epoxy coatings.

SPECIALTY CLEANERS SPECIALTY CLEANERS

SPECIALTY CLEANERS


40

Item # SizeCUNS G001 000 1 Gal. (3.8L)

CUNS G005 000 5 Gal. (18.9L) Pail

Item # SizeCMFC P001 000 Case of 40 - 1Lb. (.45kg) Bags

CMFC P150 000 Case of 40 - 1.5Lb. (.675kg) Bags

Densifier Item # Densifier Plus Item # SizeCDSF G001 000 CDSP G001 000 1 Gal. (3.8L)

CDSF G005 000 CDSP G005 000 5 Gal. (18.9L)

Shur-Grip Item # Ultra-Grip Item # SizeCSHG P001 000 CULG P001 000 1 lb. (.45kg) Pail

CSHG P003 000 CULG P003 000 3 lb. (1.35kg) Pail

Densifier/Densifier PlusINCRETE SYSTEMS’ Densifier and Densifier Plus are

specially formulated liquid concrete floor hardeners ideal

for heavy traffic surfaces. Each is a solution of sodium silicates de-

signed to react with the concrete to seal the pores and chemically

harden the surface. Densifier Plus includes lithium

and added siliconates to increase water repellency

and minimize ASR cracks.

Densifer & Densifier Plus increase abrasion and

stain resistance, eliminate dusting, and are perma-

nent integral waterproofers.

Shur-Grip/Ultra-GripINCRETE SYSTEMS’ Shur-Grip and Ultra-Grip are finely graded

additives for sealers and coatings where increased slip resistance

is desired. Each leaves a unique textured durable surface (Ultra-Grip is slightly greater in particle size creating an increase in the

texture of the surface).

Both Shur-Gripand Ultra-grip are recommended

for indoor and outdoor applications, especially

over decorative concrete surfaces where other

non-skid materials cannot be used because of

their color.

Uni-StrippINCRETE SYSTEMS’ Uni-Stripp is an environmentally safe paint,

film and coatings remover designed to remove solvent base ther-

moplastic acrylic and two component epoxy

sealers from concrete surfaces. Uni-Stripp isbiodegradable, non-toxic, non-flammable,

and non-combustile. In addition, Uni-Strippalso works well in removing stains, varnish,

and sealers, as well as epoxies.

MISCELLANEOUS PRODUCTSMISCELLANEOUS PRODUCTS

Mono-FiberINCRETE SYSTEMS’ Mono-Fiber adds long term durability and

functions as plastic reinforcement intended to reduce the formation

of shrinkage cracks in concrete.

MISCELLANEOUS PRODUCTS


41

Item # Product SizeSee Colors Vinyl Chips 20 Lb. (9.1kg) Box

Item # Color Size

CWSS P050 000 White 50 Lb. (22.7kg) Bag

CWSS P050 355 Gray 50 Lb. (22.7kg) Bag

Item # SizeCFRS G001 000 1 Gal (3.8L) Can

CFRS G005 000 5 Gal. (18.9L) Pail

Granite Coat Vinyl Chip SystemINCRETE SYSTEMS’ Granite Coat Vinyl Chips are part of the

Granite Coat epoxy flooring system designed to duplicate the look

of terrazo or granite floors. The Granite Coat System consists of a

base coat of High Performance Epoxy (Pigmented) a broadcast

coat of Granite Coat Vinyl Chips and a finishing top coat of High

Performance Epoxy (Clear). The Granite Coat System is ideal for

garage floors, basement

floors, gamerooms, restau-

rants, clinic floors, workshop

floors as well as lobbies and

entryways. The Granite Coat

System can be purchased as

a kit or as separates.

Wall Form ReleaseINCRETE SYSTEMS’ Wall Form Release is a premium quality

water based release which will eliminate concrete build-up and

reduces bug holes. Non-residual, non-staining, and VOC compli-

ant, Wall Form Release can be used effectively in all types of

weather and resists rain wash-off, and meets

Army Corp. of Engineers specifications. Ideal

for use with Stone-Crete Formliners, Increte

Systems Wall Form Release can also be used

with standard concrete forms.

Stone-Crete Color SprayINCRETE SYSTEMS’ Stone-Crete Color Spray is a pre-mixed ce-

ment and pigmented mineral powder

blend that is specially formulated for use

with the Increte Systems Stone-Crete

Architectural Wall System as a simple way

to revitalize unsightly concrete wall sys-

tems or change color to existing walls.

It is ideal as a foundation for use with

Increte Stains and other coloring methods.

MISCELLANEOUS PRODUCTSMISCELLANEOUS PRODUCTS

MISCELLANEOUS PRODUCTS

Granite Coat Kit

Available in 6 Standard

Color Blends


For Complete Selection Of Standard Colors, See

42 1-800-752-4626 www.increte.com

44 1-800-752-4626 www.increte.com

cat a logo

Documents

friendly formula

special synthetic

colors30 standard

flexible stamping

colors custom

high strength

vertical surfaces

stamped concrete