cat performance handbook
TRANSCRIPT
-
CaterpillarPerformanceHandbook
42
42Caterpillar Perform
ance HandbookSEBD0351-42
2012 Caterpillar All Rights Reserved Printed in USACAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
English_Cover_BW2.indd 1English_Cover_BW2.indd 1 12/14/11 3:42 PM12/14/11 3:42 PM
-
Edition 42 1
TRACK-TYPE TRACTORS 1
MOTOR GRADERS 2
SKID STEER LOADERS MULTI TERRAIN LOADERS COMPACT TRACK LOADERS 3
EXCAVATORS 4
BACKHOE LOADERS 5
FOREST PRODUCTS 6
PIPELAYERS 7
WHEEL TRACTOR-SCRAPERS TOWED SCRAPERS 8
OFF-HIGHWAY & MINING TRUCKS 9
ARTICULATED TRUCKS 10
WHEEL DOZERS SOIL COMPACTORS 11
WHEEL LOADERS INTEGRATED TOOLCARRIERS 12
TRACK LOADERS 13
TELESCOPIC HANDLERS 14
PAVING PRODUCTS 15
UNDERGROUND MINING EQUIPMENT 16
HYDROMECHANICAL WORK TOOLS 17
ENGINES 18
CONTENTSPage
Preface . . . . . . . . . . . . . . . . . . . . . . . 4Environment and Sustainability . . . 4Operator and Machine Protection . . . . . . . . . . . 5 Operator Training . . . . . . . . . . 5 Machine Modifications . . . . . . 7 Equipment Options . . . . . . . . . 7 Machine Protection . . . . . . . . . 7 Fire Prevention. . . . . . . . . . . . . 7 Safety Regulations . . . . . . . . . . 8 Sound Suppression . . . . . . . . . 8 Replacement Parts Warning . . 8Nomenclature . . . . . . . . . . . . . . . . . 9
PHB-Intro-Nom-12.indd 1PHB-Intro-Nom-12.indd 1 12/14/11 4:31 PM12/14/11 4:31 PM
-
CATERPILLAR PERFORMANCE HANDBOOKa publication by Caterpillar Inc., Peoria, Illinois, U.S.A.
JANUARY 2012
2 Edition 42
Important Notice: The subscription list has been discontinued for the Caterpillar Performance Handbook (PHB). Edition 42 is the final PHB to be distributed via a subscription list. Effective immediately, allPerformance Handbooks, including this current edition, can be ordered 24/7 at https://oos.midlandcorp.com/cat. Please direct any inquiries about the Performance Handbook tothe Caterpillar Performance Handbook Coordinator at [email protected].
Performance information in this booklet is intended for estimating purposes only. Because of the many variables peculiar to individual jobs (including material characteristics, operator efficiency, underfoot conditions, altitude, etc.), neither Caterpillar Inc. nor its dealers warrant that the machines described will perform as estimated.
NOTE: Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Materials and specifications are subject to change without notice.
Printed in U.S.A. 1979-2012 Caterpillar Inc. SEBD0351-42
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellowand the Power Edge trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
PHB-Intro-Nom-12.indd 2PHB-Intro-Nom-12.indd 2 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 3
ESTIMATING OWNING & OPERATING COSTS 20
FORMER MODELS 19
TIRES 21
MINING AND EARTHMOVING 22
STOCKPILE COAL HANDLING 23
LAND CLEARING 24
WASTE HANDLING 25
TECHNOLOGY PRODUCTS 26
TABLES 27
PHB-Intro-Nom-12.indd 3PHB-Intro-Nom-12.indd 3 12/14/11 4:31 PM12/14/11 4:31 PM
-
Machine performance must ultimately be meas ured in unit cost of material moved, a measure that includes both production and costs. Factors bearing directly on productivity include such things as weight to horse-power ratio, capacity, type of transmission, speeds and operating costs. The Perfor mance Handbook consid-ers these factors in detail. There are other less direct machine performance factors for which no tables, charts or graphs are possible. Serviceability, parts availability and operator convenience are examples. In compar-ing machine performance, all factors should be con-sidered. This Handbook is intended as an aid which, when coupled with experience and a good knowledge of local conditions, can assist in estimating true machine performance.
Many sections of the Handbook include tables or curves showing cycle times or hourly production figures for Cat machines under certain conditions. State ments of conditions always accompany or precede the curves or tables. Before using any per formance information in this Handbook, a complete understanding of the qualifying conditions is essential. The data is based on field testing, computer analysis, laboratory research and experience; and every effort has been made to assure their correctness.
However, all such data is based upon 100% efficiency in operation a status which cannot be achieved con-tinuously even under ideal conditions. Thus, in using such performance and production data, it is necessary to correct the results indicated in the handbook tables by appropriate factors. This allows for the anticipated actual job efficiency, operator efficiency, material char-acteristics, haul road conditions, altitude and other fac-tors which may reduce performance or production on a particular job.
Methods for estimating machine owning and oper-ating costs vary widely, depending on locality, indus-try practices, owner preferences and other factors. One method is suggested in the Handbook section on Owning and Operating Costs. When used with good judgment, it has provided reasonably accurate estimates in the past. Included in the Owning and Operating Section are guidelines, based on working conditions, to assist in estimating consumption of fuel and lubricants, tire life and repair costs for Cat machines. However, what one Handbook user regards as excellent con-ditions, another may consider severe or average, depending on his own experience and basis of compari-son. Therefore, these guidelines should be considered only approximations.
Caterpillar Inc. has made every effort to assure that the information contained in this Handbook is accurate and is a fair statement of the results to be achieved in the circumstances indicated. However, because of the many variables involved in estimating the production or per-formance of earthmoving machinery, their consumption of fuel and lubricants, tire life and repair costs, and the possibility of inadvertent errors or omissions in assem-bling this data, Caterpillar cannot and does not imply that all data in this book are complete nor that this level of performance will be achieved on a given job.
Specifications shown in this Handbook were current at time of printing. However, due to Caterpillars many machine improvement programs, specifications and materials may change without notice. For current speci-fications relating to a machines performance, please refer to the most recent Cat product specification sheet.
Caterpillar Inc.
4 Edition 42
PREFACE
ENVIRONMENT AND SUSTAINABILITY
Caterpillar supports environmental responsibility through sustainable development. Our products and ser-vices are intended to support sustainable development of global resources and they will meet or exceed appli-cable regulations and standards wher ever they are ini-tially sold. We establish and adhere to environmentally sound policies and practices in product design, engi-neering, and manufacturing. We educate and encourage
our customers to use the products they purchase from us in environmentally responsible ways. We take effec-tive steps to continually increase the natural resources efficiency and cleanliness of our facilities. When avail-able, the various product groups have included rele-vant sustain ability data with their content updates for inclusion in the Performance Handbook.
PHB-Intro-Nom-12.indd 4PHB-Intro-Nom-12.indd 4 12/14/11 4:31 PM12/14/11 4:31 PM
-
OPERATOR AND MACHINE PROTECTION
A well trained operator, working under suitable con-ditions, utilizing a modern, properly-equipped machine provides a machine-operator team capable of giving maximum production. These factors, along with appro-priate job site rules and communication procedures, are essential to coordinate people and machines working together.
Appropriately protected and maintained machines are less likely to suffer premature component failure or damage, and give operators the confidence and assur-ance they need to carry out their work. Further more, training is not complete until the operator reads, under-stands and agrees to follow the instructions provided in the Operation and Maintenance Manual included with every Cat machine.
Employers have a duty to provide a safe work place for their employees. The purchaser of a Cat machine has a duty to review his/her particular appli cation and job site for the machine to identify potential haz ards inher-ent to that application or job site. Based on the results of this hazard analysis, the appropri ate operator and machine protection configuration can be determined.
Caterpillar designs, builds, and tests its products to ensure the safety of operators, maintenance persons, ser-vice persons, and bystanders. That means people in, on and around Cat products. Caterpillar pro vides as stan-dard equipment the appropriate operator and machine protection for most applications. How ever, particular applications, including the use of some Work Tools, may require additional operator and/or machine protection. Caterpillar offers related options for most such applica-tions. However, there may be very special applications where the Cat dealer or the Purchaser may want to fabri-cate, or request Caterpillar to provide, custom or special guard ing. Your Cat dealer can help you with this hazard analysis and guarding configuration process.
I. Operator Training and Protection PracticesRemember that any kind of machine or mechanical device can be hazardous if not kept in good condition, or if operated by careless or improperly trained operators, or if operated in an irresponsible manner.
Listed below are some recommended basic steps that can be broadly applied to most work environments: Train operators for the job they are assigned to do.
The length and type of training must comply with governmental and local regulations wherever they apply. As an example, machine operators in mining activities must be trained in accordance with Mine Safety and Health Administration (MSHA) regula-tions. Where specific regulations do not apply, no operator should be assigned to a job until he or she meets the following minimum requirements: Completes proper training to operate the assigned
machine and understands that seat belts must be worn whenever seated in operators compart ment. SEAT BELTS SAVE LIVES!
Reads and understands the Operation & Main-tenance manual for that machine, and knows that a copy of that manual is stored in the operators compartment.
Reads and understands the AEM (Associa tion of Equipment Manufacturers), or any other furnished manual related to rules for safe machine operation and identification of hazards. For exam ple, that includes the Work Tool Operation and Maintenance Manual if a Cat Work Tool is involved in the given application.
Has appropriate personal safety equipment and knows how to use it. This includes such things as hard hat, gloves, safety glasses, hearing protection, high-visibility vest, and safety shoes.
Knows what the job requirements are, what other machines are working in the area, and is aware of any hazardous conditions that may arise.
Edition 42 5
PHB-Intro-Nom-12.indd 5PHB-Intro-Nom-12.indd 5 12/14/11 4:31 PM12/14/11 4:31 PM
-
Be sure operators are alert and in proper physical and mental condition to perform their work assignments safely. No machine should be operated by a person who is drowsy, under the affect of medicines or drugs, suffers blackouts, or is suffering from any physical or mental distraction that could contribute to unsafe operation.
Maintain proper job conditions and working proce-dures. Check the job for possible hazards, both above and below ground level. Look for all possible sources of danger to the operator and others in the area. When operating in hazardous conditions the door and windows must always be closed. Pay particular attention to conditions which may be hazardous or near the operating limits of the machine: e.g., side slopes, steep grades, potential overloads, etc. Examine the work site for restricted traffic patterns, obstructed views, congestion, under ground power or gas lines, etc. If the machine is equipped with a Quick Coupler, always make sure the Work Tool is properly attached by conducting an attachment test as directed in the Quick Coupler Operation and Maintenance Manual. Hazardous work conditions should be corrected wher ever possible and adequate warn ings should be posted when applicable.
Provide the correct machine to handle the job and equip it properly for the job to provide the neces-sary operator protection. Check for compliance with all applicable governmental and local regulations. It is the legal responsibility of the machine owner or employer to see that his equipment complies with, and is operated in accordance with, all such requirements.
Make sure the machine is properly maintained. The operator at the beginning of each shift should per-form a walk-around inspection before the machine is placed in operation. This process is described in the machine and Work Tool Opera tion and Main tenance Manual. If this inspection reveals any problems that could affect safety, the machine or Work Tool must not be operated until these problems are corrected. Some examples include: Loose, bent or missing grab irons, railings or steps; Worn, cut or missing seat belts (any seat belt over
three (3) years old must be replaced regard less of condition);
Damaged windows in the operators compartment; Worn, rubbing or abraded electrical insulation and
hydraulic hoses; Material or unwanted debris accumulation; Incompatibility of the component attachments
(Quick Couplers); Hydraulic leaks that could impair the lock/secure
feature of a Quick Coupler or other securing devices; Any fluid leaks; and Missing or damaged guards.
Know the limits of your machine and equipment. With certain Work Tool combinations, including Quick Couplers, the Work Tool can hit the cab or the machine. Always check for interference limits when first operating.
It is the machine owners or employers responsibility to ensure the machine is properly maintained. Your Cat dealer will be glad to assist you in selecting and equipping the machine best suited for your job and in providing maintenance for your machines.
6 Edition 42
PHB-Intro-Nom-12.indd 6PHB-Intro-Nom-12.indd 6 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 7
II. Machine ModificationsModifications must not be made to the machine that: Interfere with operator visibility; Interfere with ingress or egress from the machine; Exceed the rated payload or gross combination
weight of the machine resulting in overloading the braking and/or steering system or the roll-over pro-tective structure (ROPS) capacity rating (shown on a plate affixed to the ROPS); or
Place objects in the cab that intrude into the oper-ators space or that are not firmly fixed into place.
Are not authorized by Caterpillar.
III. Operator-related Equipment OptionsEach job presents unique conditions that must be
taken into account. Consider direct dangers to the operator as well as all possible sources of distraction that could reduce operator efficiency and increase the chances of costly and dangerous mistakes. Climate-controlled, sound-suppressed cabs, and special exterior lighting are options available from Caterpillar that can address requirements of special working environments.
Flexible machines include hydraulic excavators (track-type, wheel-type, and compact), skid-steer load-ers, backhoe loaders and integrated tool-carriers can utilize interchangeable Work Tools to accomplish spe-cific tasks. Work Tools or any tool used in hazardous applications like demolition, quarry, logging, stump grinding, scrap handling, milling, and scaling, can create a need for special operator guarding. When flying debris from impact, cutting, shearing or sweeping attachments is present, additional protective devices such as a front screen, Falling Object Guarding System (FOGS, includes top & front guard ing), thick polycarbonate windshields or a combina tion of these is recommended by Caterpillar. The failure to provide proper operator/machine guarding in some of these applications can lead to machine dam-age, personal injury or death. Contact your Cat dealer for operator guarding options on your machine.
IV. Machine ProtectionCheck the job for unusually demanding conditions
that could cause premature failure or excessive wear of machine components. Additional protective devices such as heavy-duty radiator guards, crank case guards, engine enclosures, track roller guards and/or brake shields may be needed. Also, consider the use of anti-vandalism devices, such as cap locks and instru ment panel guards. The failure to provide proper guarding in some of these applications can lead to machine damage, personal injury or death. Contact your Cat dealer for machine-protection and vandalism- prevention options for your machine.
V. Fire PreventionRemember that most fluids on your machine are flammable!
To minimize the risk of fire, Caterpillar recommends following these basic steps:
Always perform the Walk-Around Inspection described in Part I. It can identify many of the fire hazards described below.
Remove trash (leaves, twigs, papers, etc.) that may accumulate in the engine compartment or around other hot parts on the product.
Do not operate a machine if leakage of flamma-ble fluids is noticed. Repair leaks before resum -ing machine operation. Most fluids used in Cat machines should be considered flammable.
Keep access doors to major machine compartments in working order to permit the use of fire fighting equipment, should a fire occur.
Avoid attaching electrical wiring to hoses and tubes that contain flammable or combustible fluids. Hydrau-lic hoses can move during machine operation and abrade wires and other hoses if improperly secured.
Replace any rubbing, damaged, frayed, kinked or leaking hydraulic hoses or fittings. Use genuine Cat parts or their equivalent, including both pressure and temperature limit capabilities.
Follow safe fueling practices as described in Cat Operation and Maintenance Manuals, AEM Safety Manuals, and local regulations. Never store flam-mable fluids in the machine operators compart-ment, nor smoke while fueling the machine.
As an additional safety measure, keep a fire extin-guisher on the machine in a location as specified in the Operation and Main te nance Manual.
Consider installation of an after-market fire-sup-pres sion system (FSS) on the equipment if the appli-cation and working conditions warrant it.
PHB-Intro-Nom-12.indd 7PHB-Intro-Nom-12.indd 7 12/14/11 4:31 PM12/14/11 4:31 PM
-
VI. Safety RegulationsRegulations vary from country to country and often
within country. Your Cat dealer can assist you in prop-erly equipping your machine to meet applicable require-ments. Note: The general summaries given below are not substitutes for Owners or Employers reading and being familiar with the appropriate local laws.
(a) United States (US)With a few exceptions, all machine operations in the
United States are covered by federal and/or state regula-tions. If the machine is used in mining activities, the reg-ulations are administered by the Mine Safety and Health Administration (MSHA). Other activities, including construction, are under regulations administered by the Occupational Safety and Health Administration (OSHA). These agencies require employers to provide a safe working environment for employees. Caterpillar has the same objective.
OSHA and MSHA have adopted criteria for ROPS, Falling Object Protective Structures (FOPS), seat belts, warning horns, back-up alarms, operator sound lev-els, steering systems, and braking systems. Addi tional operators compartment protection may be required for machines engaged in logging, demolition and other special applications.
(b) European Union (EU)The EU Machinery Safety Directive applies to Cat
machines and most work tools. It requires that the CE mark be applied to the product and that a man-ufacturers declaration be provided. The CE mark indicates that safety issues have been addressed by apply-ing the appropriate safety standards in the design and manufacture of the machine. The objective of the Safety Directive is to protect operators, specta tors and main-tenance personnel. Caterpillar fully supports this objec-tive. This is especially true if a machine is not equipped with a closed cab. For example if the machine has no cab, or is being operated with the doors or windows opened.
VII. Sound SuppressionDifferent marketing areas have different noise emis-
sion requirements. Noise regulations usually specify limits for operators and spectators.
(a) United StatesOSHA and MSHA noise-control regulations set per-
missible noise-exposure limits for machine operators and employees. Operator protection from machine noise can be achieved by use of factory-built cabs as offered in the Caterpillar Price List. These cabs, when properly maintained and operated with the doors and windows closed, reduce the operator sound level for an eight-hour operating period to meet the OSHA and MSHA noise-exposure limits in effect at the date of manufac-ture. Variables that may be encountered on the job site, such as other nearby noise sources or noise-reflecting surfaces, may reduce the allowable work hours. If this occurs, ear protective devices may be required. This is especially true if a machine is not equipped witha closed cab. For example if the machine has no cab,or is being operated with the doors or windows opened.
(b) European UnionOperator sound-exposure requirements for machines
in Europe are very similar to the OSHA and MSHA regulations mentioned above. In addition to operator sound-exposure requirements, most types of Cat machines are subject to European Commission regulations for exterior sound levels. Caterpillar ensures its products sold in the EU comply with the applicable noise regulations.
VIII. Replacement Parts for your CatMachine
8 Edition 42
WARNINGWhen replacement parts are required for this product, Caterpillar recommends using Cat replacement parts or parts with equivalent specifications including, but not limited to, physical dimensions, type, strength and material. Failure to heed this warning can lead to premature failures, product damage, personal injury or death of persons on, or around, the product.
PHB-Intro-Nom-12.indd 8PHB-Intro-Nom-12.indd 8 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 9
NomenclatureTHE CAT PRODUCT LINE
TRACK-TYPE TRACTORSFlywheel power 55 to 634 kW (74 to 850 hp)
D3K XL (LRC)D3K LGP (LRC)D3K2 XLD3K2 LGP
D5K XL (LRC)D5K LGP (LRC)D5K2 XLD5K2 LGP
D5N XLD5N LGP
D6R Series 3*D6R XL Series 3*D6R XW Series 3*D6R LGP Series 3*
D6T*D6T XLD6T XWD6T LGP
D6K XLD6K LGP
D7G Series 2D6RD6R XLD6R LGP
D7ED7E LGP
D7R
D7R Series 2*D7R XR Series 2*D7R LGP Series 2*
D8RD8T*D8R LGPD8T LGP
D9RD9T*
D10T* D11TD11T CD
* Waste Handling Arrangements (WHA)available for sanitary landfill applications
MOTOR GRADERSFlywheel power 104 to 397 kW (140 to 533 hp)
120K
14M Global 16M Global
D4K XL (LRC)D4K LGP (LRC)D4K2 XLD4K2 LGP
*All Wheel Drive.
120M Global120M Globalwith AWD* option
160K 160M Global160M Global withAWD* option
140K 140M Global140M Globalwith AWD* option
12K 12M Global
24M Global
SKID STEER LOADERS/MULTI TERRAIN LOADERS/COMPACT TRACK LOADERSOperating Weight 2600 to 4865 kg (5710 to 10,730 lb)
Skid Steer216B3226B3242B3236B3252B3
Skid Steer246C256C262C272C
Multi Terrain247B3257B3
Multi Terrain277C287C297C
Multi Terrain259B3
Compact Track279C289C299C
D6N XLD6N LGP
PHB-Intro-Nom-12.indd 9PHB-Intro-Nom-12.indd 9 12/14/11 4:31 PM12/14/11 4:31 PM
-
10 Edition 42
422E 428E
HYDRAULIC EXCAVATORSOperating Weight 1650 to 316 600 kg (3640 to 698,000 lb)
Track Models
307C307D
312D312D L
315D L 320D320D RR
323D L323D LN
320D L320D LRR
336D336D L336D LN336E340D HD WH336E L336E LN
349D349D L FIX 349D L VG349E349E L FIX349E L VG
324D324D L324E324E L324E LN
308D CR308C CR SB
301.6C301.8C
302.5C 303C CR 304C CR303.5C CR 305C CR
305.5
311D LRR
313C CR313C SR
314C CR314C LCR
374D
Wheel ModelsFront ShovelsOperating Weight 74 300 to 318 500 kg (163,803 to 702,000 lb)
M315D
M316D
385C FS
BACKHOE LOADERSDigging depth 4420 to 6528 mm (14'6" to 21'5")
416E 420E/420E IT 430E/430E IT 432E 442E 450E434E MECHANICAL434E PILOT444E
M313D
M318D M322D
390D
319D L319D LN
321D LCR 329D329D L329E329E L329E LN
PHB-Intro-Nom-12.indd 10PHB-Intro-Nom-12.indd 10 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 11
WHEEL TRACTOR-SCRAPERS
Standard ModelsHeaped capacity 17 to 26 m3 (22 to 34 yd3)
Elevating ScrapersHeaped capacity 17.6 m3 (23 yd3)
Tandem Powered ScrapersHeaped capacity 17 to 33.6 m3 (22 to 44 yd3)
Push-Pull ScrapersHeaped capacity 17 to 33.6 m3 (22 to 44 yd3)
631G621H
623H
Coal Bowl ScrapersHeaped capacity 38 to 56 m3 (50 to 73 yd3)
637G 657G
627H
627H
637G
637G
657G
657G
PIPELAYERSLifting capacity 18 145 to 91 625 kg (40,000 to 202,000 lb)
PL61 PL83 PL87
FOREST PRODUCTS
525C535C545C
517 Grapple527 Grapple
517 Cable527 Cable
Wheel Skidders Track Skidders Forest MachinesWheel Loaders and Integrated Tool Carriers Work Tools
320D FM324D FM
325D FM330D FM
Track Harvesters
501501 HD511521522
532541551552
Track Feller Bunchers
511521522532
Wheel Feller Bunchers
Felling Heads
553563573
HF 201HF 221
Forwarders
534544564574584/584HD
Knuckleboom Loaders
519529559B569579
519SM519SM/EHC569SM569SM/EHC
541551552
950H LL966H LL980H LL
988H LLIT62H LL
GrapplesLogging ForksWoodchip DozersScoopsRakes
Wheel Harvester
550
PHB-Intro-Nom-12.indd 11PHB-Intro-Nom-12.indd 11 12/14/11 4:31 PM12/14/11 4:31 PM
-
12 Edition 42
ARTICULATED TRUCKSCapacity 23.6 to 39.5 metric tons (26 to 43.5 U.S. tons)
725 730 730 Ejector 735 740 740 Ejector
WHEEL DOZERSFlywheel power 173 to 597 kW (232 to 801 hp)
LANDFILL COMPACTORSFlywheel power 173 to 349 kW (232 to 468 hp)
SOIL COMPACTORSFlywheel power 173 to 264 kW (232 to 354 hp)
WHEEL LOADERS & INTEGRATED TOOLCARRIERSBucket Capacity (Heaped) 0.6 to 30 m3 (0.78 to 40 yd3)
* High lift arrangement available. Waste handling arrangement available.
* OEM Solutions Group non-dumper for special applications available
814F2 824H 834H
815F2 825H816F2 826H
844H 854K
836H
914G/IT14G 924Hz 928Hz
938H*IT38H
950H* 962H*IT62H
966H* 972H* 980H*
988H* 990H* 992K 994F*993K*
904H 906H 907H 908H 924H Pin On*924H Hook On*
930H Pin On*930H Hook On*
CONSTRUCTION & MINING TRUCKS
Construction & Mining TrucksCapacity 37 to 363 metric ton 41 to 400 U.S. tons
770770G*772772G*
773E773G*775G*
777D777G*
785C*785D*
789C 793D793F
797F
PHB-Intro-Nom-12.indd 12PHB-Intro-Nom-12.indd 12 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 13
PAVING PRODUCTS*
RM300 RM500
PM102 PM200 2.0 m
PM200 2.2 m
Reclaimer/Soil StabilizersFlywheel power 250-321 kW (335-430 hp)Cutting width 2438 mm (8'0")
Asphalt PaversPaving width 914 to 9754 mm (3 to 32 ft)
AP600D
BG1000E BG555E
BG500E
AP300 AP500E AP1000E
AP655D AP755
BG655D BG1055EBG600D
AP555E
AP255
TELESCOPIC HANDLERS
Non-U.S. Versions
AP1055E
U.S. Versions
TH255
TL642TL943TL1055TL1255
TH406TH407
TH255 TH406TH407TH336TH337TH414TH417TH514
TRACK LOADERSBucket Capacity (Heaped)* 1.15 to 3.2 m3 (1.5 to 4.2 yd3)
*General Purpose Bucket.Waste handling arrangement available.
*Paving products starting with BG are Barber Greene products.
953D 963D 973C 973D
Cold Planers
PM201
PHB-Intro-Nom-12.indd 13PHB-Intro-Nom-12.indd 13 12/14/11 4:31 PM12/14/11 4:31 PM
-
14 Edition 42
CP-573E CP-573ECP-573E CP-573E
Vibratory and Pneumatic Tire CompactorsSingle Drum SmoothDrum width 1270 to 2130 mm (4'2" to 7'0")
CS423E CS533E
CS56
CP-573E CP-573E
CS64 CS74 CS76 CS76 XT
R
CP-433ECP-433E
CS44
CP-533E CP-533E
CS54
CP-533E CP-533E
PAVING PRODUCTS (Continued)
Single Drum, PaddedDrum width 1270 to 2130 mm (4'2" to 7'0")
Double Drum and CombiDrum width 1000 to 2130 mm (3'3.4" to 7'0")
Pneumatic Tire Asphalt CompactorsWheel loads 1134 to 5000 kg (2500 to 11,020 lb)
CB14 CB14 XW CB14 Full Flush CB22
PS150C
CB54 XW
PS360C
CB24 CC24
CB434D CB54 CB64
CP54
CP56
CP44 CP533E
CP-533E CP-533E CP-533E CP-533E
CP-573E CP-573E
CP64
CP-573E CP-573E
CP74
CP-573E CP-573E
CP76
CB-434DCB-434D
CB434D XW
CB-434DCB-434D
CD54
CD54CD54
R
PS-150C PS-150CHEAVY- EAVY-WEIGHT EIGHT
CB32
PHB-Intro-Nom-12.indd 14PHB-Intro-Nom-12.indd 14 12/14/11 4:31 PM12/14/11 4:31 PM
-
Edition 42 15
UNDERGROUND MINING
Load-Haul-DumpBucket sizes 2.4-11.6 m3 (3.1-15.2 yd3)
Articulated Trucks30-55 t (33-61 T) capacity
R1300G II R1600G R2900GR2900G XTRA
R1700G
AD45B AD55BAD30
HYDROMECHANICAL WORK TOOLS
Hydraulic Hammers
Mobile Scrap and Demolition Shears
Multi- Processors
H35D SH45D SH55D SH65D SH70/H70 SH90/H90C SH100/H100 S
H115 SH120C SH130 SH140D SH160D SH180D S
S305S320BS325B
S340BS365BS385B
ContractorsGrapples
Sorting and DemolitionGrapples
Orange Peel Grapples
G107BG112BG115BG120BG125B
G130BG145BG165BG185B
MP15MP20
MP30MP40
G315G320G330
G310BG315BG320B
GSH15BGSH20BGSH22B
PHB-Intro-Nom-12.indd 15PHB-Intro-Nom-12.indd 15 12/14/11 4:31 PM12/14/11 4:31 PM
-
Notes
16 Edition 42
PHB-Intro-Nom-12.indd 16PHB-Intro-Nom-12.indd 16 12/14/11 4:31 PM12/14/11 4:31 PM
-
1
Edition 42 1-1
TRACK-TYPE TRACTORSHydraulic Controls
BulldozersRippers and Winches
CONTENTSTRACK-TYPE TRACTORS
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3Power Shift Drawbar Pull vs. Ground Speed Curves. . . . . . . . . . . . . . . . . . .1-19Power Shift Travel Speeds . . . . . . . . . . . . . . . . . . . .1-24Ground Pressures . . . . . . . . . . . . . . . . . . . . . . . . . .1-26Extreme Slope Operation . . . . . . . . . . . . . . . . . . . .1-28
HYDRAULIC CONTROLS
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-29Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-30
BULLDOZERS
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-33Summary of Blade Options. . . . . . . . . . . . . . . . . . .1-34Blade Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-35General Dimensions (Tractor and Blade) . . . . . . . .1-38SAE Blade Capacity Definition . . . . . . . . . . . . . . .1-38Blade Specifications. . . . . . . . . . . . . . . . . . . . . . . . .1-39Estimating Production Off-the-Job. . . . . . . . . . . . .1-52Job Condition Correction Factors . . . . . . . . . . . . .1-56Measuring Production On-the-Job . . . . . . . . . . . . .1-57Work Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-57
RIPPERS
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-59Ripper Specification Diagrams Adjustable Parallelogram Ripper . . . . . . . . . . . .1-60 Radial Ripper . . . . . . . . . . . . . . . . . . . . . . . . . . .1-62 Fixed Parallelogram Ripper . . . . . . . . . . . . . . . .1-62Specifications Track-Type Tractors . . . . . . . . . . . . . . . . . . . . . .1-63Tip Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72Estimating Ripping Production . . . . . . . . . . . . . . .1-72Seismic Wave Velocity Charts . . . . . . . . . . . . . . . . .1-75Estimated Ripper Production Graphs . . . . . . . . . .1-80
WINCHES
PACCAR Features . . . . . . . . . . . . . . . . . . . . . . . . .1-83Allied Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-84Physical Specifications. . . . . . . . . . . . . . . . . . . . . . .1-85Operating Specifications . . . . . . . . . . . . . . . . . . . . .1-99
Waste Handling See Waste Track-Type Tractors . . . . . . . . . . Handling Section
TRACK-TYPE TRACTORSFeatures: Cat Diesel Engines provide the power, high torque
rise, reliability and performance you can depend on.
HEUI on D6R and D7R increases fuel efficiency, reduces smoke, improves cold starting and enhances diagnostic capabilities.
Electronic Unit Injection (EUI) on D7R Series2. The Electronic Control Module (ECM) performs much like a mechanical governor, but has no moving parts. The ECM signals the injectors regulating the fuel sup ply thus controlling engine speed and power. EUI provides: Reduced exhaust smoke, automatic altitude compensation and cold start protection.
Mechanical Electronic Unit Injector (MEUI) on D8T, D9T, D10T and D11T excels in its ability to control injec tion pressure over the entire engine operating speed range. It combines the technical advancement of an electronic control system with the simplicity of direct mechanically controlled unit fuel injection. These features allow the engine to have complete con trol over injection timing, duration, and pressure.
PHB-Sec01(pg01-28).indd 1PHB-Sec01(pg01-28).indd 1 12/14/11 3:44 PM12/14/11 3:44 PM
-
FeaturesTrack-Type Tractors
1-2 Edition 42
Common Rail fuel injection system on D6K, D6N, D6T and D7E as well as D3K, D4K and D5K; optimizes performance and fuel consumption, minimizes heat rejection, and lowers emissions.
Oil cooled steering clutches and brakes stan dard on D9R, D10T and D11T.
Finger Tip Controls (FTC) of transmission, steering clutches and brakes on D10T and D11T.
Differential steering allows infinitely variable turn ing radius. Standard on the D6N, D6T, D7R Series 2, D7E, D8R and D8T, allows the tractor to make a power turn keeping both tracks working for more traction and higher performance.
Electronic Hydrostatic Power Train System on D3K thru D6K allows power turns, stepless speed range, smooth modulation, dynamic hydrostatic braking, supe-rior maneuverability and excel lent controllability.
Electric Drive Power Train System on D7E allows step-less speed range, smooth modulation, and excellent efficiency. When coupled with differ ential steer it pro-vides superior maneuverability with locked-track pivot turn capability and excellent controllability.
Combined hand lever steering located left of operator provides easier operation on D9R.
Standard Tractors designed for heavy dozing and gen-eral grading.
XL Tractor D6T offers higher horsepower and longer roller frames for increased finish grading capability, flotation and productivity.
Extra Wide (XW) gauge on D6T length roller frame provides wider shoes for greater flotation and sta bil-ity for steep slope grading.
Sealed and Lubricated Track reduces pin and bush-ing wear for lower undercarriage repair costs. Sealed and lubricated track is standard on the D3K, D4K, and D5K while heavy duty track chain is available on D6N, D6T, D7R Series 2 and D7E improves wear life and reduces pin/bore stretching and cracking.
SystemOne Undercarriage extends undercarriage sys-tem life, improves reliability, and reduces owning and operating costs. Optional on D6T (all sources), D6K and D6N, optional on D8T and D8R (East Peoria sourced), D3K, D4K, D5K.
Elevated sprockets (not on D6K or D7E) eliminate final drive stress induced by roller frame movement and ground impact loads. Final drives pull chain only. Seals moved up out of dirt, sand and water for longer life. Blade visibility improved because operator sits higher.
Resilient mounted bogie undercarriage on D8R, D8T, D9T, D10T and D11T reduces shock transmitted to tractor. Allows track to conform to rough ground for better traction.
Solid mounted undercarriage standard on D3K through D5K provides stable platform for low impact, and high abrasion applications. Provides optimum finish grad-ing performance.
Oscillating undercarriage on D6K through D7E and optional on the D8R and D8T decreases ground shock to the machine and provides a smoother, more com-fort able ride for the operator.
Accessible modular design on D6N XL and up greatly reduces drive train removal and installation time result-ing in reduced repair costs.
Tag link on D7R Series 2 and up; L-shaped push arms on D6N, D6T and D7E. Both designs allow closer mounting of dozer blades. This reduces total tractor length, improves maneuverability, balance, blade pen-etration and pryout.
Low ground pressure (LGP) tractors offergreater flo-tation in soft, swampy conditions. Available on D3K through D8T.
PHB-Sec01(pg01-28).indd 2PHB-Sec01(pg01-28).indd 2 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors1
Edition 42 1-3
MODEL D3K XL (LRC) D3K LGP (LRC) D3K2 XL D3K2 LGPFlywheel Power 55.2 kW 74 hp 55.2 kW 74 hp 59.7 kW 80 hp 59.7 kW 80 hp
Operating Weight* 7795 kg 17,185 lb 8093 kg 17,842 lb 7958 kg 17,544 lb 8403 kg 18,525 lb
Engine Model C4.4 ACERT C4.4 ACERT C4.4 ACERT C4.4 ACERT
Rated Engine RPM 1900 1900 2200 2200
No. of Cylinders 4 4 4 4
Bore 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13"
Stroke 127 mm 5.0" 127 mm 5.0" 127 mm 5.0" 127 mm 5.0"
Displacement 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3
Track Rollers (Each Side) 6 6 6 6
Width of Standard Track Shoe 406 mm 16" 635 mm 25" 406 mm 16" 635 mm 25"
Length of Track on Ground 2095 mm 83" 2095 mm 83" 2248 mm 89" 2248 mm 89"
Ground Contact Area (w/Std. Shoe) 17 011 cm2 2637 in2 26 607 cm2 4124 in2 18 254 cm2 2848 in2 28 550 cm2 4425 in2
Track Gauge 1495 mm 59" 1725 mm 68" 1495 mm 59" 1725 mm 68"
GENERAL DIMENSIONS:
Height (To Top of ROPS) 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8"
Overall Length (with P blade) 4266 mm 168" 4255 mm 167.6" 4266 mm 168" 4266 mm 168"
(without Blade) 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9"
Width (w/o Trunnion and Blade Std. Shoe) 1901 mm 74.8" 2360 mm 92.9" 1901 mm 74.8" 2360 mm 92.9"
Ground Clearance 332 mm 13" 332 mm 13" 332 mm 13" 332 mm 13"
Blade Types and Widths:
VPAT, Straight 2646 mm 104.1" 3149 mm 124.0" 2646 mm 104.1" 3149 mm 124"
VPAT, Angled 25 2417 mm 95.1" 2874 mm 113" 2417 mm 95.1" 2874 mm 113"
Fuel Tank Refill Capacity 195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
* Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigid drawbar, front pull device and standard service crankcase guard.
PHB-Sec01(pg01-28).indd 3PHB-Sec01(pg01-28).indd 3 12/14/11 3:44 PM12/14/11 3:44 PM
-
1-4 Edition 42
Track-Type Tractors Specifications
MODEL D4K XL (LRC) D4K LGP (LRC) D4K2 XL D4K2 LGPFlywheel Power 62.6 kW 84 hp 62.6 kW 84 hp 68.8 kW 92 hp 68.8 kW 92 hp
Operating Weight* 8147 kg 17,961 lb 8501 kg 18,742 lb 8201 kg 18,080 lb 8510 kg 18,761 lb
Engine Model C4.4 ACERT C4.4 ACERT C4.4 ACERT C4.4 ACERT
Rated Engine RPM 1900 1900 2200 2200
No. of Cylinders 4 4 4 4
Bore 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13"
Stroke 127 mm 5.0" 127 mm 5.0" 127 mm 5.0" 127 mm 5.0"
Displacement 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3
Track Rollers (Each Side) 7 7 7 7
Width of Standard Track Shoe 460 mm 18" 635 mm 25" 460 mm 18" 635 mm 25"
Length of Track on Ground 2248 mm 89" 2248 mm 89" 2248 mm 89" 2248 89"
Ground Contact Area (w/Std. Shoe) 20 682 cm2 3206 in2 28 550 cm2 4425 in2 20 862 cm2 3206 in2 28 550 cm2 4425 in2
Track Gauge 1550 mm 61" 1725 mm 68" 1550 mm 61" 1725 mm 68"
GENERAL DIMENSIONS:
Height (To Top of ROPS) 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8"
Overall Length (with P blade) 4274 mm 168" 4266 mm 168" 4266 mm 168" 4266 mm 168"
(without Blade) 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9"
Width (w/o Trunnion and Blade Std. Shoe) 2010 mm 79.1" 2360 mm 92.9" 2010 mm 79.1" 2360 mm 92.9"
Ground Clearance 332 mm 13" 332 mm 13" 332 mm 13" 332 mm 13"
Blade Types and Widths:
VPAT, Straight 2782 mm 109.5" 3149 mm 124.0" 2782 mm 109.5" 3149 mm 124"
VPAT, Angled 25 2542 mm 100.1" 2874 mm 113" 2542 mm 100.1" 2874 mm 113"
Fuel Tank Refill Capacity 195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
* Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigid drawbar, front pull device and standard service crankcase guard.
PHB-Sec01(pg01-28).indd 4PHB-Sec01(pg01-28).indd 4 12/14/11 3:44 PM12/14/11 3:44 PM
-
Edition 42 1-5
1
Track-Type Tractors Specifications
MODEL D5K XL (LRC) D5K LGP (LRC) D5K2 XL D5K2 LGPFlywheel Power:
Hydrostatic 71.6 kW 96 hp 71.6 kW 96 hp 77.6 kW 104 hp 77.6 kW 104 hp
Operating Weight:*
Hydrostatic 9408 kg 20,741 lb 9683 kg 21,347 lb 9314 kg 20,534 lb 9646 kg 21,266 lb
Engine Model C4.4 ACERT C4.4 ACERT C4.4 ACERT C4.4 ACERT
Rated Engine RPM 1900 1900 2100 2100
No. of Cylinders 4 4 4 4
Bore 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13"
Stroke 127 mm 5.0" 127 mm 5.0" 127 mm 5.0" 127 mm 5.0"
Displacement 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3 4.4 L 269 in3
Track Rollers (Each Side) 7 7 7 7
Width of Standard Track Shoe 510 mm 20" 660 mm 26" 510 mm 20" 660 mm 26"
Length of Track on Ground 2310 mm 91" 2310 mm 91" 2310 mm 91" 2310 mm 91"
Ground Contact Area (w/Std. Shoe) 23 562 cm2 3652 in2 30 492 cm2 4726 in2 23 562 cm2 3652 in2 30 492 cm2 4726 in2
Track Gauge 1600 mm 63" 1750 mm 69" 1600 mm 63" 1750 mm 69"
GENERAL DIMENSIONS:
Height (To Top of ROPS Canopy) 2769 mm 109.0" 2769 mm 109.0" 2769 mm 109.0" 2769 mm 109.0"
Height (To Top of ROPS Cab) 2769 mm 109.0" 2769 mm 109.0" 2769 mm 109.0" 2769 mm 109.0"
Overall Length (with P Blade) 4321 mm 170.1" 4294 mm 169.1" 4321 mm 170.1" 4321 mm 170.1"
(without Blade) 3199 mm 125.9" 3265 mm 128.5" 3199 mm 125.9" 3265 mm 128.5"
Width (w/o Trunnion and Blade Std. Shoe) 2110 mm 83.1" 2410 mm 94.9" 2110 mm 83.1" 2410 mm 94.9"
Ground Clearance 332 mm 13" 332 mm 13" 332 mm 13" 332 mm 13"
Blade Types and Widths:
VPAT, Straight 2782 mm 109.5" 3220 mm 126.7" 2782 mm 109.5" 3220 mm 126.7"
VPAT, Angled 25 2636 mm 103.8" 2940 mm 115.8" 2636 mm 103.8" 2940 mm 115.8"
Fuel Tank Refill Capacity 195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
195 L 51.5 U.S.gal
* Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigid drawbar, front pull device and standard service crankcase guard.
PHB-Sec01(pg01-28).indd 5PHB-Sec01(pg01-28).indd 5 12/14/11 3:44 PM12/14/11 3:44 PM
-
MODEL D6K XL D6K LGP D6K XL D6K LGP Engine Emissions Tier Tier 4 Interim/
StageIIIBTier 4 Interim/
StageIIIB
Flywheel Power:
Hydrostatic 93.2 kW 125 hp 93.2 kW 125 hp 93.2 kW 125 hp 93.2 kW 125 hp
Operating Weight:
Hydrostatic 12 886 kg 28,409 lb 13 467 kg 29,690 lb 12 866 kg 28,409 lb 13 467 kg 29,690 lb
Engine Model C6.6 ACERT C6.6 ACERT C6.6 ACERT C6.6 ACERT
Rated Engine RPM 2100 2100 2100 2100
No. of Cylinders 6 6 6 6
Bore 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13"
Stroke 127 mm 5.0" 127 mm 5.0" 127 mm 5.0" 127 mm 5.0"
Displacement 6.6 L 403 in3 6.6 L 403 in3 6.6 L 403 in3 6.6 L 403 in3
Track Rollers (Each Side) 7 7 7 7
Width of Standard Track Shoe 560 mm 22" 760 mm 30" 560 mm 22" 760 mm 30"
Length of Track on Ground 2645 mm 104" 2645 mm 104" 2645 mm 104" 2645 mm 104"
Ground Contact Area (w/Std. Shoe) 3.0 m2 4650 in2 4.0 m2 6200 in2 3.0 m2 4650 in2 4.0 m2 6200 in2
Track Gauge 1770 mm 70" 2000 mm 79" 1770 mm 70" 2000 mm 79"
GENERAL DIMENSIONS:
Height (To Top of ROPS Canopy) 2958 mm 116.5" 2958 mm 116.5" 2958 mm 116.5" 2958 mm 116.5"
Height (To Top of ROPS Cab) 2958 mm 116.5" 2958 mm 116.5" 2958 mm 116.5" 2958 mm 116.5"
Overall Length (with VPAT Blade) 4688 mm 185" 4688 mm 185" 4688 mm 185" 4688 mm 185"
(without Blade) 4220 mm 166" 4220 mm 166" 4220 mm 166" 4220 mm 166"
Width (w/o Trunnion and Blade Std. Shoe)* 2330 mm 91.7" 2760 mm 108.7" 2330 mm 91.7" 2760 mm 108.7"
Ground Clearance 360.4 mm 14.2" 360.4 mm 14.2" 360.4 mm 14.2" 360.4 mm 14.2"
Blade Types and Widths:
VPAT 3077 mm 121.1" 3360 mm 132.3" 3195 mm 125.8" 3683 mm 145"
Fuel Tank Refill Capacity 275 L 72.6 U.S.gal
275 L 72.6 U.S.gal
275 L 72.6 U.S.gal
275 L 72.6 U.S.gal
*Width (w/o Trunnion Std. Shoe) is also w/o VPAT Blade.
SpecificationsTrack-Type Tractors
1-6 Edition 42
PHB-Sec01(pg01-28).indd 6PHB-Sec01(pg01-28).indd 6 12/14/11 3:44 PM12/14/11 3:44 PM
-
MODEL D6N XL D6N LGP D6N XL D6N LGPEngine Emissions Tier Tier 4 Interim/
StageIIIBTier 4 Interim/
StageIIIB
Flywheel Power:
Power Shift 111.8 kW 150 hp 111.8 kW 150 hp 111.8 kW 150 hp 111.8 kW 150 hp
Operating Weight:
Power Shift Differential Steer 16 668 kg 36,747 lb 17 997 kg 39,712 lb 16 668 kg 36,747 lb 17 997 kg 39,712 lb
Engine Model C6.6 ACERT C6.6 ACERT C6.6 ACERT C6.6 ACERT
Rated Engine RPM 2200 2200 2200 2200
No. of Cylinders 6 6 6 6
Bore 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13"
Stroke 127 mm 5.0" 127 mm 5.0" 127 mm 5.0" 127 mm 5.0"
Displacement 6.6 L 403 in3 6.6 L 403 in3 6.6 L 403 in3 6.6 L 403 in3
Track Rollers (Each Side) 7 8 7 8
Width of Standard Track Shoe 610 mm 24" 840 mm 33" 610 mm 24" 840 mm 33"
Length of Track on Ground 2611 mm 103" 3113 mm 123" 2611 mm 103" 3113 mm 123"
Ground Contact Area (w/Std. Shoe) 3.18 m2 4929 in2 5.24 m2 8122 in2 3.18 m2 4929 in2 5.24 m2 8122 in2
Track Gauge 1890 mm 74.4" 2160 mm 85" 1890 mm 74.4" 2160 mm 85"
GENERAL DIMENSIONS:
Height (To Top of ROPS Canopy) 3040 mm 119.7" 3144 mm 123.8"
Height (To Top of ROPS Cab) 3095 mm 121.9" 3200 mm 126" 3095 mm 121.9" 3200 mm 126"
Overall Length (with VPAT Blade) 4903 mm 193" 5369 mm 211.4" 5035 mm 198.2" 5398 mm 212.5"
(without Blade) 3740 mm 147.2" 4165 mm 164" 3740 mm 147.2" 4165 mm 164"
(with SU Blade) 5157 mm 203" 5157 mm 203"
Width (over Trunnion) 2630 mm 103.5" 2630 mm 103.5"
Width (w/o Trunnion Std. Shoe)* 2500 mm 98.4" 3000 mm 118" 2500 mm 98.4" 3000 mm 118"
Ground Clearance 394 mm 15.5" 507 mm 20.0" 394 mm 15.5" 507 mm 20.0"
Blade Types and Widths:
Semi-U 3154 mm 124" 3154 mm 124"
VPAT 3272 mm 128.8" 4080 mm 160.6" 3272 mm 128.8" 4082 mm 160.7"
Fuel Tank Refill Capacity 300 L 79.3 U.S.gal
300 L 79.3 U.S.gal
300 L 79.3 U.S.gal
300 L 79.3 U.S.gal
*Width (w/o Trunnion Std. Shoe) is also w/o VPAT Blade.
1
Edition 42 1-7
Specifications Track-Type Tractors
PHB-Sec01(pg01-28).indd 7PHB-Sec01(pg01-28).indd 7 12/14/11 3:44 PM12/14/11 3:44 PM
-
SpecificationsTrack-Type Tractors
MODEL D6R D6R XL D6R LGPFlywheel Power 130 kW 175 hp 145 kW 195 hp 145 kW 195 hp
Operating Weight:*
Power Shift 18 325 kg 40,400 lb 20 080 kg 44,270 lb 21 716 kg 47,874 lb
Engine Model C9 C9 C9
Rated Engine RPM: Power Shift 2000 2000 2000
No. of Cylinders 6 6 6
Bore 112 mm 4.4" 112 mm 4.4" 112 mm 4.4"
Stroke 149 mm 5.9" 149 mm 5.9" 149 mm 5.9"
Displacement 8.8 L 537 in3 8.8 L 537 in3 8.8 L 537 in3
Track Rollers (Each Side) 6 7 8
Width of Standard Track Shoe 560 mm 22" 560 mm 22" 915 mm 36"
Length of Track on Ground 2664 mm 105" 2871 mm 113" 3275 mm 129"
Ground Contact Area (w/Std. Shoe) 2.98 m2 4620 in2 3.22 m2 4972 in2 5.99 m2 9288 in2
Track Gauge 1880 mm 74" 1880 mm 74" 2286 mm 90"
GENERAL DIMENSIONS:
Height (Stripped Top)** 3143 mm 10'4" 3143 mm 10'4" 3193 mm 10'6"
Height (To Top of ROPS Canopy) 3195 mm 10'6" 3195 mm 10'6" 3245 mm 10'8"
Height (To Top of ROPS Cab) 3195 mm 10'6" 3195 mm 10'6" 3245 mm 10'8"
Overall Length (without Blade) 3860 mm 12'8" 3860 mm 12'8" 4247 mm 13'11"
with S Blade 4903 mm 16'0" 5465 mm 17'9"
with SU Blade 5095 mm 16'7" 5332 mm 17'5"
with Angle Blade 5007 mm 16'4"
Width (over Trunnion) 2640 mm 8'8" 2640 mm 8'8" 3491 mm 11'5"
Width (w/o Trunnion Std. Track) 2440 mm 8'0" 2440 mm 8'0" 3201 mm 10'6"
Ground Clearance 383 mm 1'3" 383 mm 1'3" 433 mm 1'5"
Blade Types and Widths:
Straight 3360 mm 11'0" 4063 mm 13'4"
Angle Straight 4166 mm 13'8" 4166 mm 13'8"
Semi-U 3260 mm 10'8" 3260 mm 10'8"
Fuel Tank Refill Capacity 424 L 112 U.S.gal 424 L 112 U.S.gal 424 L 112 U.S.gal** Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluid, SU blade, horn, back-up alarm, retrieval
hitch and front pull hook.**Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
1-8 Edition 42
PHB-Sec01(pg01-28).indd 8PHB-Sec01(pg01-28).indd 8 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors1
Edition 42 1-9
MODEL D6R Series 3D6R Series 3
XLD6R Series 3
XWD6R Series 3
LGPFlywheel Power 138 kW 185 hp 149 kW 200 hp 149 kW 200 hp 149 kW 200 hpOperating Weight:*
Power Shift Differential SteerSU Blade 18 326 kg 40,400 lb 20 081 kg 44,270 lb 20 672 kg 45,573 lb 21 716 kg 47,874 lb
Engine Model C9 ACERT C9 ACERT C9 ACERT C9 ACERTRated Engine RPM: Power Shift 1850 1850 1850 1850No. of Cylinders 6 6 6 6Bore 112 mm 4.4" 112 mm 4.4" 112 mm 4.4" 112 mm 4.4"Stroke 149 mm 5.9" 149 mm 5.9" 149 mm 5.9" 149 mm 5.9"Displacement 8.8 L 537 in3 8.8 L 537 in3 8.8 L 537 in3 8.8 L 537 in3
Track Rollers (Each Side) 6 7 7 8Width of Standard Track Shoe 560 mm 22" 560 mm 22" 760 mm 30" 915 mm 36"
VPAT 560 mm 22" 760 mm 30" 810 mm 32"Length of Track on Ground 2.67 m 8'9" 2.87 m 9'5" 2.87 m 9'5" 3.28 m 10'9"Ground Contact Area
(w/Std. Shoe) 2.98 m2 4620 in2 3.22 m2 4972 in2 4.36 m2 6780 in2 5.99 m2 9288 in2
VPAT 3.22 m2 4972 in2 4.36 m2 6780 in2 5.31 m2 8256 in2
Track Gauge 1.88 m 74" 1.88 m 74" 2.03 m 80" 2.29 m 90"VPAT 2.13 m 84" 2.29 m 90" 2.29 m 90"
GENERAL DIMENSIONS:Height (Stripped Top)** 2.38 m 7'10" 2.38 m 7'10" 2.38 m 7'10" 2.43 m 8'0"Height (To Top of ROPS Canopy) 3.20 m 10'6" 3.20 m 10'6" 3.20 m 10'6" 3.25 m 10'8"Height (To Top of ROPS Cab) 3.19 m 10'5" 3.20 m 10'6" 3.20 m 10'6" 3.25 m 10'8"Overall Length (without Blade) 3.86 m 12'8" 3.86 m 12'8" 3.86 m 12'8" 4.25 m 13'11"
with S Blade 4.90 m 16'1" 5.47 m 17'11"with SU Blade 5.10 m 16'9" 5.33 m 17'6" 5.33 m 17'6" with VPAT Blade 5.27 m 17'4" 5.27 m 17'4" 5.97 m 19'7"with Angle Blade 5.01 m 16'5" 5.21 m 17'1" 5.21 m 17'1"
Overall Length (VPAT) 3.86 m 12'8" 3.86 m 12'8" 4.25 m 13'11"with S Blade 5.47 m 17'11"with SU Blade 5.33 m 17'6" 5.33 m 17'6" with VPAT Blade 5.27 m 17'4" 5.27 m 17'4" 5.97 m 19'7"with Angle Blade 5.21 m 17'1" 5.21 m 17'1"
Width (over Trunnion) 2.64 m 8'8" 2.64 m 8'8" 2.95 m 9'8" 3.43 m 8'8"Width (w/o Trunnion
Std. Track) 2.44 m 8'0" 2.44 m 8'0" 2.74 m 9'0" 3.15 m 10'4"Ground Clearance 383 mm 1'3" 383 mm 1'3" 383 mm 1'3" 433 mm 1'5"
Blade Types and Widths:Straight 3.36 m 11'0" 4.06 m 13'4"Angle Straight 4.17 m 13'8" 4.17 m 13'8" 4.20 m 13'9" Full 25 Angle 3.78 m 12'5" 3.78 m 12'5" 3.81 m 12'6" Semi-U 3.26 m 10'8" 3.26 m 10'8" 3.56 m 11'8" VPAT
Straight 3.88 m 12'9" 4.16 m 13'8" 4.16 m 13'8"Full 24 Angle 3.55 m 11'8" 3.81 m 12'6" 3.81 m 12'6"
Fuel Tank Refill Capacity 382 L 101 U.S.gal
382 L 101 U.S.gal
382 L 101 U.S.gal
382 L 101 U.S.gal
** Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluid, SU blade, horn, back-up alarm, retrieval hitch and front pull hook.
**Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
PHB-Sec01(pg01-28).indd 9PHB-Sec01(pg01-28).indd 9 12/14/11 3:44 PM12/14/11 3:44 PM
-
SpecificationsTrack-Type Tractors
MODEL D6T XL D6T XW D6T LGPFlywheel Power 149 kW 200 hp 149 kW 200 hp 149 kW 200 hpOperating Weight:*
Power Shift Differential SteerSU Blade 20 449 kg 45,090 lb 21 301 kg 46,968 lb 22 039 kg 48,588 lb
Engine Model C9 ACERT C9 ACERT C9 ACERTRated Engine RPM: Power Shift 1850 1850 1850No. of Cylinders 6 6 6Bore 112 mm 4.4" 112 mm 4.4" 112 mm 4.4"Stroke 149 mm 5.9" 149 mm 5.9" 149 mm 5.9"Displacement 8.8 L 537 in3 8.8 L 537 in3 8.8 L 537 in3
Track Rollers (Each Side) 7 7 8Width of Standard Track Shoe 560 mm 22" 760 mm 30" 915 mm 36"
VPAT 560 mm 22" 710 mm 28" 785 mm 31"Length of Track on Ground 2.84 m 9'4" 2.84 m 9'4" 3.25 m 10'8"Ground Contact Area (w/Std. Shoe) 3.18 m2 4929 in2 4.31 m2 6681 in2 5.95 m2 9223 in2
VPAT 3.18 m2 4929 in2 4.03 m2 6247 in2 5.10 m2 7905 in2
Track Gauge 1.88 m 74" 2.03 m 80" 2.29 m 90"VPAT 2.13 m 84" 2.29 m 90" 2.29 m 90"
GENERAL DIMENSIONS:Height** (Stripped Top)*** 2.44 m 8'0" 2.44 m 8'0" 2.45 m 8'0"Height** (To Top of ROPS Canopy) 3.20 m 10'6" 3.20 m 10'6" 3.25 m 10'8"Height** (To Top of ROPS Cab) 3.15 m 10'4" 3.15 m 10'4" 3.15 m 10'4"Overall Length (without Blade) 3.86 m 12'8" 3.86 m 12'8" 4.25 m 13'11"
with S Blade 5.47 m 17'11"with SU Blade 5.33 m 17'6" 5.33 m 17'6" with VPAT Blade 5.27 m 17'4" 5.27 m 17'4" 5.97 m 19'7"with Angle Blade 5.21 m 17'1" 5.21 m 17'1" 5.82 m 19'1"
Width (over Trunnion) 2.64 m 8'8" 2.95 m 9'8" 3.43 m 8'8"Width (w/o Trunnion Std. Track) 2.44 m 8'0" 2.79 m 9'2" 3.20 m 10'6"Ground Clearance** 384 mm 1'3" 384 mm 1'3" 434 mm 1'5"
Blade Types and Widths:Straight 4.06 m 13'4"Angle Straight 4.17 m 13'8" 4.50 m 14'9" 5.07 m 16'8"Full 25 Angle 3.78 m 12'5" 3.81 m 12'6" 4.63 m 15'2"Semi-U 3.26 m 10'8" 3.56 m 11'8" VPAT
Straight 3.88 m 12'9" 4.16 m 13'8" 4.16 m 13'8"Full 24 Angle 3.55 m 11'8" 3.81 m 12'6" 3.81 m 12'6"
Fuel Tank Refill Capacity 425 L 112 U.S.gal 425 L 112 U.S.gal 425 L 112 U.S.gal*** Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight.***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
Track-Type Tractor SustainabilityWell matched engine and power train systems enhance productivity and fuel efficiency.
1-10 Edition 42
PHB-Sec01(pg01-28).indd 10PHB-Sec01(pg01-28).indd 10 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors1
Edition 42 1-11
MODEL D6T XL D6T XW D6T LGPEngine Emissions Tier Tier 4 Interim/Stage IIIB Tier 4 Interim/Stage IIIB Tier 4 Interim/Stage IIIB
Flywheel Power 149 kW 200 hp 149 kW 200 hp 149 kW 200 hp
Operating Weight:*
Power Shift Differential Steer 20 679 kg 45,590 lb 21,531 kg 47,468 lb 22,270 kg 49,096 lb
Engine Model C9.3 ACERT C9.3 ACERT C9.3 ACERT
Advertised Engine RPM 1850 1850 1850
No. of Cylinders 6 6 6
Bore 115 mm 4.5" 115 mm 4.5" 115 mm 4.5"
Stroke 149 mm 5.9" 149 mm 5.9" 149 mm 5.9"
Displacement 9.3 L 567 in3 9.3 L 567 in3 9.3 L 567 in3
Track Rollers (Each Side) 7 7 8
Width of Standard Track Shoe 560 mm 22" 760 mm 30" 915 mm 36"
VPAT 560 mm 22" 710 mm 28" 785 mm 31"
Length of Track on Ground 2.84 m 9'4" 2.84 m 9'4" 3.25 m 10'8"
Ground Contact Area (w/Std. Shoe) 3.18 m2 4929 in2 4.31 m2 6681 in2 5.95 m2 9223 in2
VPAT 3.18 m2 4929 in2 4.03 m2 6247 in2 5.10 m2 7905 in2
Track Gauge 1.88 m 74" 2.03 m 80" 2.29 m 90"
VPAT 2.13 m 84" 2.29 m 90" 2.29 m 90"
GENERAL DIMENSIONS:
Height** (Stripped Top***) 2.44 m 8'0" 2.44 m 8'0" 2.45 m 8'0"
Height** (To Top of ROPS Canopy) 3.11 m 10'2" 3.11 m 10'2" 3.16 m 10'5"
Height** (To Top of ROPS Cab) 3.15 m 10'4" 3.15 m 10'4" 3.15 m 10'4"
Overall Length (without Blade) 3.88 m 12'9" 3.88 m 12'9" 4.22 m 13'10"
with S Blade 5.43 m 17'10"
with SU Blade 5.34 m 17'6" 5.35 m 17'7"
with VPAT Blade 5.10 m 16'9" 5.37 m 17'7" 5.97 m 19'7"
with Angle Blade 5.22 m 17'2" 5.28 m 17'4" 5.80 m 19'0"
Width (over Trunnion) 2.64 m 8'8" 2.95 m 9'8" 3.43 m 8'8"
Width (w/o Trunnion Std. Track) 2.44 m 8'0" 2.79 m 9'2" 3.20 m 10'6"
Ground Clearance** 384 mm 1'3" 384 mm 1'3" 434 mm 1'5"
Blade Types and Widths:
Straight 4.16 m 13'8" 4.52 m 14'10" 5.07 m 16'8"
Angle Straight 3.80 m 12'6" 4.13 m 13'7" 4.78 m 15'8"
Full 25 Angle 3.26 m 10'8" 3.57 m 11'9"
Semi-U 3.88 m 12'9" 4.16 m 13'8" 4.16 m 13'8"
VPAT Straight 3.54 m 11'7" 3.80 m 12'6" 3.80 m 12'6"
Fuel Tank Refill Capacity 425 L 112 U.S.gal 425 L 112 U.S.gal 425 L 112 U.S.gal***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade and drawbar.***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
PHB-Sec01(pg01-28).indd 11PHB-Sec01(pg01-28).indd 11 12/14/11 3:44 PM12/14/11 3:44 PM
-
SpecificationsTrack-Type Tractors
MODEL D7E D7E LGPEngine Emissions Tier Tier 4 Interim/Stage IIIB Tier 4 Interim/Stage IIIB
Advertised Flywheel Power 175 kW 235 hp 175 kW 235 hp
Operating Weight:*
Electric Drive Differential Steer 25 996 kg 57,310 lb 28 465 kg 62,755 lb
Engine Model C9.3 C9.3
Advertised Engine RPM 1700 1700
No. of Cylinders 6 6
Bore 115 mm 4.5" 115 mm 4.5"
Stroke 149 mm 5.9" 149 mm 5.9"
Displacement 9.3 L 567 in3 9.3 L 567 in3
Track Rollers (Each Side) 7 8
Width of Standard Track Shoe 610 mm 24" 915 mm 36"
Length of Track on Ground 3.02 m 9'11" 3.45 m 11'4"
Ground Contact Area (w/Std. Shoe) 3.68 m2 5698 in2 6.31 m2 9792 in2
Track Gauge 1.98 m 6'6" 2.29 m 7'6"
GENERAL DIMENSIONS:
Height** (To Top of ROPS Cab) 3.32 m 10'11" 3.32 m 10'11"
Overall Length (without Blade) 4.88 m 16'0" 4.88 m 16'0"
with S Blade 5.86 m 19'3" 5.56 m 18'3"
with SU Blade 6.07 m 19'11"
Width (over Trunnion) 2.88 m 9'5" 3.42 m 11'3"
Width (w/o Trunnion Std. Shoe) 2.59 m 8'6" 3.2 m 10'6"
Ground Clearance 472 mm 18.6" 472 mm 18.6"
Blade Types and Widths:
Straight 3.9 m 12'10" 4.54 m 14'11"
Angle Straight 4.5 m 14'9"
Full 25 Angle 4.12 m 13'6"
Universal 3.99 m 13'1"
Semi-U 3.71 m 12'2"
Fuel Tank Refill Capacity 409 L 108 U.S. gal 409 L 108 U.S. gal** Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade and drawbar.**Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.
Cat D7E Resourceful in every way The D7E is designed to maximize efficiency and productivity while conserving natural resources.
Burns 1030% less fuel per hour than previous models. Less fuel burned means reduced emissions.
The D7E earned a 2009 Clean Air Excellence Award from the U.S. Environmental Protection Agency.
More efficient 25% more material moved per liter/gallon of fuel.
Fewer parts and longer component life, less fuel and fluids, means less to replace and less to dispose.
Major structures and components are built to be rebuilt, reducing waste and replacement costs.
1-12 Edition 42
PHB-Sec01(pg01-28).indd 12PHB-Sec01(pg01-28).indd 12 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors1
Edition 42 1-13
MODEL D7G Series 2 D7R D7R XRFlywheel Power 149 kW 200 hp 179 kW 240 hp 179 kW 240 hp
Operating Weight:*
Power Shift Clutch Brake (FTC) 20 580 kg 45,381 lb
Power Shift Differential Steer 25 455 kg 56,129 lb 27 002 kg 59,540 lb
Engine Model 3306 DITA C9 C9
Rated Engine RPM 2000 2100 2100
No. of Cylinders 6 6 6
Bore 121 mm 4.75" 112 mm 4.4" 112 mm 4.4"
Stroke 152 mm 6" 149 mm 5.9" 149 mm 5.9"
Displacement 10.5 L 638 in3 8.8 L 537 in3 8.8 L 537 in3
Track Rollers (Each Side) 6 7 8
Width of Standard Track Shoe 560 mm 22" 560 mm 22" 560 mm 22"
Length of Track on Ground 2.72 m 8'11" 2.87 m 9'5" 3.05 m 10'0"
Ground Contact Area (w/Std. Shoe) 3.05 m2 4738 in2 3.22 m2 4991 in2 3.42 m2 5295 in2
Track Gauge 1.98 m 6'6" 1980 mm 6'6" 1980 mm 6'6"
GENERAL DIMENSIONS:
Height** (Stripped Top)*** 2.47 m 8'1" 2.58 m 8'6" 2.58 m 8'6"
Height** (To Top of ROPS Canopy) 3.37 m 11'1" 3.29 m 10'9" 3.29 m 10'9"
Height** (To Top of ROPS Cab) 3.37 m 11'1" 3.28 m 10'9" 3.28 m 10'9"
Overall Length (without Blade) 4.20 m 13'9" 4.73 m 15'6" 4.73 m 15'6"
with S Blade 5.28 m 17'4"
Width (over Trunnion) 2.88 m 9'5" 2.88 m 9'5"
Width (w/o Trunnion Std. Shoe) 2.55 m 8'5" 2.54 m 8'4" 2.54 m 8'4"
Ground Clearance 347 mm 13.7" 415 mm 1'4" 415 mm 1'4"
Blade Types and Widths:
Straight 3.66 m 12'0"
Angle Straight 4.27 m 14'0"
Full 25 Angle 3.90 m 12'10"
Universal
Semi-U 3.45 m 11'4" 3.69 m 12'2" 3.69 m 12'2"
Fuel Tank Refill Capacity 415 L 110 U.S.gal 481 L 127 U.S.gal 481 L 127 U.S.galFTC Fingertip clutch/brake control
*** Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight. D7G includes ROPS canopy and end track guiding guards.
***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
Track-Type Tractor SustainabilityMajor structures and components are built to be rebuilt, reducing waste and replacement costs.
PHB-Sec01(pg01-28).indd 13PHB-Sec01(pg01-28).indd 13 12/14/11 3:44 PM12/14/11 3:44 PM
-
SpecificationsTrack-Type Tractors
MODEL D7R LGP D7R Series 2 D7R Series 2 XRFlywheel Power 179 kW 240 hp 179 kW 240 hp 179 kW 240 hp
Operating Weight:*
Power Shift Differential Steer 27 626 kg 60,916 lb 25 455 kg 56,129 lb 27 002 kg 59,540 lb
Engine Model C9 3176C SCAC 3176C SCAC
Rated Engine RPM 2100 2100 2100
No. of Cylinders 6 6 6
Bore 112 mm 4.4" 124 mm 4.92" 124 mm 4.92"
Stroke 149 mm 5.9" 140 mm 5.5" 140 mm 5.5"
Displacement 8.8 L 537 in3 10.3 L 629 in3 10.3 L 629 in3
Track Rollers (Each Side) 7 7 8
Width of Standard Track Shoe 914 mm 36" 560 mm 22" 610 mm 24"
Length of Track on Ground 3.16 m 10'5" 2.87 m 9'5" 3.05 m 10'0"
Ground Contact Area (w/Std. Shoe) 5.78 m2 8960 in2 3.21 m2 4976 in2 3.72 m2 5766 in2
Track Gauge 2235 mm 7'4" 1.98 m 6'6" 1.98 m 6'6"
GENERAL DIMENSIONS:
Height** (Stripped Top)*** 2.7 m 8'10" 2.58 m 8'6" 2.58 m 8'6"
Height** (To Top of ROPS Canopy) 3.37 m 11'1" 3.29 m 10'9" 3.29 m 10'9"
Height** (To Top of ROPS Cab) 3.36 m 11'0" 3.28 m 10'9" 3.28 m 10'9"
Overall Length (without Blade) 4.73 m 15'6" 4.73 m 15'6" 4.73 m 15'6"
with S Blade 5.81 m 19'1" 5.81 m 19'1" 5.81 m 19'1"
Width (over Trunnion) 3.37 m 11'1" 2.88 m 9'5" 2.88 m 9'5"
Width (w/o Trunnion Std. Shoe) 3.15 m 10'4" 2.54 m 8'4" 2.59 m 8'6"
Ground Clearance 495 mm 1'7" 415 mm 1'4" 415 mm 1'4"
Blade Types and Widths:
Straight 4.55 m 14'11" 3.52 m 11'7" 3.32 m 11'7"
Angle Straight 4.50 m 14'9" 4.50 m 14'9"
Full 25 Angle 4.12 m 13'6" 4.12 m 13'6"
Universal 3.98 m 13'1" 3.98 m 13'1"
Semi-U 3.69 m 12'2" 3.69 m 12'2"
Fuel Tank Refill Capacity 481 L 127 U.S. gal 481 L 127 U.S.gal 481 L 127 U.S.gal*** Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight.
D7G includes ROPS canopy and end track guiding guards.***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.
1-14 Edition 42
PHB-Sec01(pg01-28).indd 14PHB-Sec01(pg01-28).indd 14 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors
MODEL D7R Series 2 LGP D8R D8R LGPFlywheel Power 179 kW 240 hp 228 kW 305 hp 228 kW 305 hp
Operating Weight:*
Power Shift Differential Steer 27 626 kg 60,916 lb 37 580 kg 82,850 lb 33 730 kg 74,360 lb
Engine Model 3176C SCAC 3406C TA 3406C TA
Rated Engine RPM 2100 2100 2100
No. of Cylinders 6 6 6
Bore 124 mm 4.92" 137 mm 5.4" 137 mm 5.4"
Stroke 140 mm 5.5" 165 mm 6.5" 165 mm 6.5"
Displacement 10.3 L 629 in3 14.6 L 893 in3 14.6 L 893 in3
Track Rollers (Each Side) 7 8 8
ERF 9
Width of Standard Track Shoe 914 mm 36" 610 mm 24" 965 mm 38"
Length of Track on Ground 3.16 m 10'5" 3.21 m 10'6" 3.20 m 10'6"
Ground Contact Area (w/Std. Shoe) 5.78 m2 8960 in2 3.91 m2 6062 in2 6.2 m2 9576 in2
Track Gauge 2.24 m 7'4" 2.08 m 6'10" 2.34 m 7'8"
GENERAL DIMENSIONS:
Height** (Stripped Top)*** 2.70 m 8'10" 2.67 m 8'9" 2.67 m 8'9"
Height** (To Top of ROPS Canopy) 3.40 m 11'2" 3.51 m 11'6" 3.51 m 11'6"
Height** (To Top of ROPS Cab) 3.39 m 11'1" 3.45 m 11'3" 3.45 m 11'3"
Overall Length (with SU Blade) 6.91 m 22'8" 6.91 m 22'8"
(without Blade) 4.93 m 16'2" 4.93 m 16'2"
Overall Length (without Blade) 4.73 m 15'6"
(with S Blade) 5.81 m 19'1"
Width (over Trunnion) 3.37 m 11'1" 3.05 m 10'0" 3.55 m 11'7"
Width (w/o Trunnion Std. Shoe) 3.15 m 10'4" 2.70 m 8'8" 3.30 m 10'10"
Ground Clearance 495 mm 1'7" 606 mm 1'11" 574 mm 1'11"
Blade Types and Widths:
Straight 4.55 m 14'11"
Angle Straight 4.99 m 16'4"
Full 25 Angle 4.52 m 14'10"
Universal 4.26 m 14'0"
Semi-U 3.94 m 12'11" 4.40 m 14'5"
Fuel Tank Refill Capacity 481 L 127 U.S.gal 625 L 165 U.S.gal 625 L 165 U.S.gal*** Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight.*** D8R equipped with track guides, ROPS/FOPS cab, single shank ripper and SU blade.***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar. ERF Extended Track Roller Frame. Extends frame 302 mm (11.9"), adds 3 track sections and 2 rollers/side.
Track-Type Tractor SustainabilityCat tractors are designed for ease of serviceability, with features like ground-level service points and wide engine enclosure doors.
1
Edition 42 1-15
PHB-Sec01(pg01-28).indd 15PHB-Sec01(pg01-28).indd 15 12/14/11 3:44 PM12/14/11 3:44 PM
-
SpecificationsTrack-Type Tractors
MODEL D8T D8T LGP D8T D8T LGPEngine Emissions Tier Tier 4 Interim/
Stage IIIBTier 4 Interim/
Stage IIIB
Flywheel Power 231 kW 310 hp 231 kW 310 hp 231 kW 310 hp 231 kW 310 hp
Operating Weight:*
Power Shift Differential Steer 38 488 kg 84,850 lb 38 488 kg 84,850 lb 38 941 kg 85,850 lb 38 941 kg 85,850 lb
Engine Model C15 ACERT C15 ACERT C15 ACERT C15 ACERT
Rated Engine RPM 1850 1850 1850 1850
No. of Cylinders 6 6 6 6
Bore 137 mm 5.4" 137 mm 5.4" 137 mm 5.4" 137 mm 5.4"
Stroke 172 mm 6.75" 172 mm 6.75" 172 mm 6.75" 172 mm 6.75"
Displacement 15.2 L 928 in3 15.2 L 928 in3 15.2 L 928 in3 15.2 L 928 in3
Track Rollers (Each Side) 8 8 8 8
Width of Standard Track Shoe 610 mm 24" 965 mm 38" 610 mm 24" 965 mm 38"
Length of Track on Ground 3.21 m 10'6" 3.20 m 10'6" 3.21 m 10'6" 3.20 m 10'6"
Ground Contact Area (w/Std. Shoe) 3.91 m2 6062 in2 6.2 m2 9576 in2 3.91 m2 6062 in2 6.2 m2 9576 in2
Track Gauge 2.08 m 6'10" 2.34 m 7'8" 2.08 m 6'10" 2.34 m 7'8"
GENERAL DIMENSIONS:
Height** (Stripped Top)*** 2.67 m 8'9" 2.67 m 8'9" 2.67 m 8'9" 2.67 m 8'9"
Height** (To Top of ROPS Canopy) 3.46 m 11'4" 3.45 m 11'4" 3.46 m 11'4" 3.45 m 11'4"
Height** (To Top of ROPS Cab) 3.46 m 11'4" 3.45 m 11'4" 3.46 m 11'4" 3.45 m 11'4"
Overall Length (with SU Blade) 6.09 m 20'0" 6.09 m 20'0" 6.09 m 20'0" 6.09 m 20'0"
(without Blade) 4.64 m 15'3" 4.98 m 16'4" 4.64 m 15'3" 4.98 m 16'4"
Width (over Trunnion) 3.06 m 10'0" 3.06 m 10'0" 3.06 m 10'0" 3.06 m 10'0"
Width (w/o Trunnion Std. Shoe) 2.64 m 8'8" 2.64 m 8'8" 2.64 m 8'8" 2.64 m 8'8"
Ground Clearance 618 mm 2'4" 609 mm 2'0" 618 mm 2'4" 609 mm 2'0"
Blade Types and Widths:
Angle Straight 4.99 m 16'4" 4.99 m 16'4"
Full 25 Angle 4.52 m 14'10" 4.52 m 14'10"
Universal 4.26 m 14'0" 4.26 m 14'0"
Semi-U 3.94 m 12'11" 4.40 m 14'5" 3.94 m 12'11" 4.40 m 14'5"
Fuel Tank Refill Capacity 643 L 170 U.S.gal
643 L 170U.S.gal
643 L 170 U.S.gal
643 L 170 U.S.gal
*** Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, semi universal blade with tilt, back-up alarm, seat belts, lights, rigid drawbar and front towing device.
***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar.
Track-Type Tractor SustainabilityCat engines with ACERT Technology provide powerful reliability, while meeting the toughest emissions standards.
1-16 Edition 42
PHB-Sec01(pg01-28).indd 16PHB-Sec01(pg01-28).indd 16 12/14/11 3:44 PM12/14/11 3:44 PM
-
Specifications Track-Type Tractors
MODEL D9R D9TFlywheel Power 302 kW 405 hp 306 kW 410 hp
Operating Weight:*
Power Shift Clutch Brake 48 784 kg 107,548 lb
Power Shift Differential Steer 47 900 kg 105,600 lb
Engine Model 3408C SCAC C18 ACERT
Rated Engine RPM 1900 1800
No. of Cylinders 8 6
Bore 137 mm 5.4" 145 mm 5.7"
Stroke 152 mm 6" 183 mm 7.2"
Displacement 18 L 1099 in3 18.1 L 1104 in3
Track Rollers (Each Side) 8 8
Width of Standard Track Shoe 610 mm 24" 610 mm 24"
Length of Track on Ground 3.47 m 11'5" 3.47 m 11'5"
Ground Contact Area (w/Std. Shoe) 4.24 m2 6569 in2 4.24 m2 6569 in2
Track Gauge 2.25 m 7'5" 2.25 m 7'5"
GENERAL DIMENSIONS:
Height** (Stripped Top)*** 3.00 m 9'10"
Height** (To Top of ROPS Canopy) 3.99 m 13'1" 4.00 m 13'1"
Height** (To Top of ROPS Cab) 3.82 m 12'6" 3.82 m 12'6"
Overall Length (with SU Blade) 6.84 m 22'5"
(without Blade) 5.18 m 17'0"
(with SU Blade and Ripper) 6.63 m 21'10"
(without Blade and Ripper) 4.91 m 16'1"
Width (over Trunnion) 3.30 m 10'10" 3.31 m 10'11"
Width (w/o Trunnion Std. Shoe) 2.93 m 9'8" 2.87 m 9'5"
Ground Clearance 591 mm 1'11" 596 mm 1'11"
Blade Types and Widths:
Universal 4.65 m 15'3" 4.65 m 15'3"
Semi-U 4.31 m 14'2" 4.31 m 14'2"
Fuel Tank Refill Capacity 818 L 216 U.S.gal 889 L 235 U.S.gal*** Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, semi universal blade with tilt, back-up
alarm, seat belts, lights, rigid drawbar and front towing device.*** D9R equipped with track guides, ROPS/FOPS cab, single shank ripper and SU blade.***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces.***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar.* SAE J1234.
1
Edition 42 1-17
PHB-Sec01(pg01-28).indd 17PHB-Sec01(pg01-28).indd 17 12/14/11 3:44 PM12/14/11 3:44 PM
-
1-18 Edition 42
MODEL D10T D11T D11T CDFlywheel Power 433 kW 580 hp 634 kW 850 hp 634 kW 850 hp
Operating Weight:*
Power Shift Clutch Brake 66 451 kg 146,500 lb 104 600 kg 230,100 lb 113 000 kg 248,600 lb
Engine Model C27 ACERT C32 ACERT C32 ACERT
Rated Engine RPM 1800 1800 1800
No. of Cylinders 12 12 12
Bore 137 mm 5.4" 145 mm 5.71" 145 mm 5.71"
Stroke 152 mm 6" 162 mm 6.38" 162 mm 6.38"
Displacement 27 L 1647.5 in3 32.1 L 1959 in3 32.1 L 1959 in3
Track Rollers (Each Side) 8 8 8
Width of Standard Track Shoe 610 mm 24" 710 mm 28" 915 mm 36"
Length of Track on Ground (Idler to Idler) 3.88 m 12'9" 4.44 m 14'7" 4.44 m 14'7"
Ground Contact Area (w/Std. Shoe) 4.74 m2 7347 in2 6.31 m2 9781 in2 8.1 m2 12,581 in2
Track Gauge 2.55 m 8'4" 2.89 m 9'6" 2.89 m 9'6"
GENERAL DIMENSIONS:
Height (Stripped Top)** 3.222 m 10'7" 3.64 m 11'11" 3.64 m 11'11"
Height (To Top of ROPS Canopy) 4.26 m 14'0" 4.60 m 15'1" 4.60 m 15'1"
Height (To Top of ROPS Cab) 4.01 m 13'2" 4.29 m 14'1" 4.29 m 14'1"
Overall Length:
(with SU Blade and SS Ripper)*** 9.16 m 30'1" 10.59 m 34'9" 10.70 m 35'1"
(without Blade and Ripper) 5.331 m 17'6" 6.03 m 19'9" 6.03 m 19'9"
Width (over Trunnion) 3.74 m 12'3" 4.38 m 14'4" 4.38 m 14'4"
Width (w/o Trunnion Std. Shoe) 3.30 m 10'10" 3.78 m 12'5" 3.81 m 12'6"
Ground Clearance 571 mm 1'10" 574 mm 1'11" 574 mm 1'11"
Blade Types and Widths:
CarryDozer 6.71 m 22'0"
Universal 5.26 m 17'3" 6.36 m 20'10"
Semi-U 4.86 m 15'11" 5.60 m 18'4"
Fuel Tank Refill Capacity 1204 L 318 U.S.gal 1609 L 425 U.S.gal 1609 L 425 U.S.gal
Fuel Tank Refill Capacity (Extra Capacity) 1987 L 505 U.S.gal 1987 L 505 U.S.gal*** Operating weight includes operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, SU blade with tilt, back-up alarm, seat belts, lights,
rigid drawbar and front towing device. ***Height (Stripped Top) without ROPS canopy, cab, exhaust, lift cylinders, seat back or other easily removed encumbrances.***Overall length of D11T CD includes Straight (CarryDozer) Blade and SS Ripper. Overall length of machine from front tag link trunion to rigid drawbar and excludeds track grouser height.SAE J1234.
All dimensions are approximate.
SpecificationsTrack-Type Tractors
PHB-Sec01(pg01-28).indd 18PHB-Sec01(pg01-28).indd 18 12/14/11 3:44 PM12/14/11 3:44 PM
-
Edition 42 1-19
1
Track-Type TractorsDrawbar Pull vs. Ground Speed Hydrostatic Drive
120
100
80
60
40
20
01 3 5 7 9
0 1.2 2.5 3.7 5.0 6.2
20.3
15.8
11.3
6.8
2.3
24.8
140
29.3
D3K XL (LRC)D3K LGP (LRC)
SPEED
DR
AW
BA
R P
ULL
N 1000
km/hmph
NOTES: Usable pull will depend upon weight and traction of equipped tractor.
Assumes sufficient machine weight for
-
0 2 4 6 8 10 12
0
50
100
150
200
250
300
350
0
10
20
30
40
50
60
70
80
0 1 2 4 5 6 83 7
1
23
D6N
SPEED
DR
AW
BA
R P
ULL
N 1000
lb 1000
mph
km/h
KEY
STD- - - - XL/LGP
KEY
STD XL/XW/LGP
0 1 2 3 4 5 6 7
1F
2F
3F
0 2 4 6 8 10 120
20
40
60
80
400
300
200
100
0
D6R
SPEEDD
RA
WB
AR
PU
LL
lb 1000
N 1000
km/h
mph
0 2 4 6 8 10 12
0
50
100
150
200
250
300
350
1
2
3
0 1 2 3 4 5 6 7 80
10
20
30
40
50
60
70
80
D6R Series 3
SPEED
DR
AW
BA
R P
ULL
N 1000
lb 1000
mph
km/h
Drawbar Pull vs. Ground Speed Power Shift
Track-Type Tractors
1-20 Edition 42
KEY
1 1st Gear2 2nd Gear3 3rd Gear
NOTE: Usable pull will depend upon weight and trac tion ofequipped tractor.
PHB-Sec01(pg01-28).indd 20PHB-Sec01(pg01-28).indd 20 12/14/11 3:44 PM12/14/11 3:44 PM
-
0 1 2 3 4 5 6 7
100
80
60
40
20
00 2 4 6 8 10 12
50
40
30
20
10
0
D7E
SPEED
DR
AW
BA
R P
ULL
lb 1000
kg 1000
km/h
mph
Drawbar Pull vs. Ground Speed Power Shift
Track-Type Tractors1
Edition 42 1-21
D6T XL/XW/LGP
SPEED
DR
AW
BA
R P
ULL
lb
mph
D7G Series 2
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
140
120
100
80
60
40
20
00 1 2 3 4 5 6 7 8
86420 10 12
20
10
30
40
50
0
60
1
2
3
D7R Series 2 Standard/XR/LGPDifferential Steer
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
KEY
1 1st Gear2 2nd Gear3 3rd Gear
NOTE: Usable pull will depend upon weight and traction of equipped tractor.
PHB-Sec01(pg01-28).indd 21PHB-Sec01(pg01-28).indd 21 12/14/11 3:44 PM12/14/11 3:44 PM
-
1-22 Edition 42
1
2
3
0 1 2 3 4 5 6 7 80
20
40
60
80
100
120
140
16070
60
50
40
30
20
10
0
0 2 4 6 8 10 12
D8RD8R LGP
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
KEY
1 1st Gear2 2nd Gear3 3rd Gear
NOTE: Usable pull will depend upon weight and traction ofequipped tractor.
70
80
60
50
40
30
20
10
0
160
180
140
120
100
80
60
40
20
0
0 2 4 6 8 10 12
0 1 2 3 4 5 6 7 8
1
2
3
D9R Power Shift with Steering Clutches and Brakes
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
0 1 2 3 4 5 6 7
1
23
0 2 4 6 8 10
0
20
40
60
80
100
120
14060
50
40
30
20
10
0
D8TD8T LGP
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
Drawbar Pull vs. Ground Speed Power Shift
Track-Type Tractors
PHB-Sec01(pg01-28).indd 22PHB-Sec01(pg01-28).indd 22 12/14/11 3:44 PM12/14/11 3:44 PM
-
Edition 42 1-23
1
Drawbar Pull vs. Ground Speed Power Shift
Track-Type Tractors
NOTE: Usable pull will depend upon weight and traction of equipped tractor. Tractors with suspended undercarriage can provide up to 15% more tractive effort than tractors with non-suspended undercarriage.
KEY
1 1st Gear2 2nd Gear3 3rd Gear
350
300
250
200
150
100
50
00 1 2 3 4 5 6 7 8
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 2 4 6 8 10 12
1
2
3
D11T/D11T CD
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
0 1 2 3 4 5 6 7 8
0 2 4 6 8 10 12
200
150
100
50
175
225
125
75
25
00
10
20
30
40
50
60
70
80
90
100
1
2
3
D10T
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
0 1 2 3 4 5 6 7 80
20
40
60
80
100
120
140
160
180
1
2
3
0 2 4 6 8 10 12
70
60
80
50
40
30
20
10
0
D9T Differential Steering
SPEED
DR
AW
BA
R P
ULL
kg 1000
lb 1000
mph
km/h
PHB-Sec01(pg01-28).indd 23PHB-Sec01(pg01-28).indd 23 12/14/11 3:44 PM12/14/11 3:44 PM
-
1-24 Edition 42
TRAVEL SPEED
POWER SHIFT MODEL
D3K (LRC)All Models
D3K2All Models
D4K (LRC)All Models
D4K2All Models
D5K (LRC)All Models
D5K2All Models
D6KAll Models
HYDROSTATIC km/h mph km/h mph km/h mph km/h mph km/h mph km/h mph km/h mphFORWARD 9.0 5.6 9.0 5.6 9.0 5.6 9.0 5.6 9.0 5.6 9.0 5.6 9.0 5.6REVERSE 10.0 6.2 10.0 6.2 10.0 6.2 10.0 6.2 10.0 6.2 10.0 6.2 10.0 6.2
POWER SHIFT MODEL D6N
Differential SteerD6R
Differential Steer
D6R Series 3 D6T D7E D7E LGPFORWARD km/h mph km/h mph km/h mph km/h mph km/h mph km/h mph
1 3.1 1.9 3.8 2.3 3.8 2.3 3.8 2.3 2 5.7 3.5 6.6 4.1 3.8 2.3 6.6 4.1 3 10.0 6.2 11.5 7.1 11.4 7.1 11.4 7.1
REVERSE1 3.1 1.9 4.8 3.0 4.8 3.0 4.8 3.0 2 6.4 4.0 8.4 5.2 8.4 5.2 8.4 5.2 3 11.6 7.2 14.6 9.1 14.5 9.0 14.6 9.0
ELECTRICFORWARD 11.3 7.0 11.3 7.0REVERSE 11.3 7.0 11.3 7.0
POWER SHIFT MODEL D7G Series 2 D7R D7R Series 2
FORWARD km/h mph km/h mph km/h mph1 3.9 2.4 3.52 2.19 3.5 2.22 6.9 4.3 6.10 3.79 6.2 3.83 9.9 6.1 10.54 6.55 10.7 6.7
REVERSE1 4.5 2.8 4.54 2.82 4.6 2.92 8.4 5.2 7.85 4.88 8.0 5.03 12.7 7.9 13.58 8.44 13.8 8.6
**Power Shift direct drive transmission available for Japan domestic market only.**Not available at time of printing.
Travel SpeedTrack-Type Tractors
PHB-Sec01(pg01-28).indd 24PHB-Sec01(pg01-28).indd 24 12/14/11 3:44 PM12/14/11 3:44 PM
-
Travel Speed Track-Type Tractors1
Edition 42 1-25
TRAVEL SPEED
POWER SHIFT MODEL
Differential SteerD8R D8T D9R D9T D10T D11T/CD
D11T/CDHigh Altitude
FORWARD km/h mph km/h mph km/h mph km/h mph km/h mph km/h mph km/h mph1 3.5 2.2 3.4 2.1 3.8 2.4 3.9 2.4 4.0 2.5 3.9 2.4 4.0 2.52 6.2 3.9 6.1 3.8 6.8 4.2 6.8 4.2 7.2 4.5 6.8 4.2 7.0 4.43 10.8 6.7 10.6 6.6 11.9 7.4 11.7 7.3 12.7 7.9 11.8 7.3 12.0 7.5
REVERSE1 4.7 2.9 4.5 2.8 4.7 2.9 4.7 2.9 5.2 3.2 4.7 2.9 4.8 3.02 8.1 5.0 8.0 5.0 8.4 5.2 8.4 5.2 9.0 5.6 8.2 5.1 8.3 5.23 13.9 8.6 14.2 8.8 14.7 9.1 14.3 8.9 15.8 9.8 14.0 8.7 14.9 9.0
DIRECT DRIVE MODEL
D6R Series 3*P.S./D.D.
FORWARD km/h mph1 3.4 2.12 5.9 3.73 10.4 6.54 5 6
REVERSE1 4.3 2.72 7.5 4.73 13.3 8.34 5 6
*Japan only.
GEAR
D6TPowershift with
Multi Velocity Program
D6TPowershift with Multi
Velocity Program Sound Suppressed
D6TTier 4 Interim/Stage IIIB Powershift with Multi
Velocity Program
D6TTier 4 Interim/Stage IIIB Powershift with Multi
Velocity Program Sound Suppressed
FORWARD km/h mph km/h mph km/h mph km/h mph1.5 3.8 2.3 3.2 2.0 3.8 2.3 3.2 2.02 5.1 3.2 5.1 3.2 5.1 3.2 5.1 3.2
2.5 6.6 4.1 6.3 3.9 6.6 4.1 6.3 3.93 8.5 5.3 8.5 5.3 8.5 5.3 8.5 5.3
3.5 11.4 7.1 10.9 6.8 11.4 7.1 10.9 6.8REVERSE
1.5 4.8 3.0 3.9 2.4 4.8 3.0 3.9 2.42 6.6 4.1 6.6 4.1 6.6 4.1 6.6 4.1
2.5 8.4 5.2 8.0 5.0 8.4 5.2 8.0 5.03 11.0 6.8 11.0 6.8 8.7 5.4 8.7 5.4
3.5 14.6 9.0 13.8 8.6 14.6 9.0 13.8 8.6
PHB-Sec01(pg01-28).indd 25PHB-Sec01(pg01-28).indd 25 12/14/11 3:44 PM12/14/11 3:44 PM
-
1-26 Edition 42
GROUND PRESSURESPressures computed from operating weights given earlier in this section in the specifications tables.
MODELSHOE WIDTH
CONTACT AREA
GROUND PRESSURE
mm in m2 in2 kPa psiD3K XL (LRC) 406 16 1.7 2637 44.80 6.50D3K LGP (LRC) 635 25 2.7 4124 29.70 4.30D3K2 XL 406 16 1.7 2637 44.80 6.50D3K2 LGP 635 25 2.7 4124 29.70 4.30D4K XL (LRC) 460 18 2.1 3206 38.60 5.60D4K LGP (LRC) 635 25 2.9 4425 29.20 4.24D4K2 XL 460 18 2.1 3206 38.60 5.60D4K2 LGP 635 25 2.9 4425 29.20 4.24D5K XL (LRC) 510 20 2.4 3652 39.10 5.67D5K LGP (LRC) 660 26 3.0 4726 31.10 4.52D5K2 XL 510 20 2.4 3652 39.10 5.67D5K2 LGP 660 26 3.0 4726 31.10 4.52D6K XL
(Standard shoe)510 20 2.70 4185 46.82 6.79560 22 3.00 4650 42.13 6.11
D6K LGP(Standard shoe)
610 24 3.20 4960 41.30 5.99760 30 4.00 6200 33.02 4.79
D6N XL (DS)(Standard shoe)
560 22 2.89 4480 56.54 8.20610 24 3.18 4929 51.43 7.46
D6N LGP (DS)(Standard shoe)
865 34 5.39 8358 32.75 4.75840 33 5.24 8117 33.72 4.89
D6R 560 22 2.98 4620 60.30 8.74610 24 3.25 5040 55.30 8.02
D6R XL 560 22 3.22 4972 61.40 8.90 610 24 3.50 5424 56.30 8.16
D6R LGP 915 36 5.99 9288 35.50 5.15991 39 6.49 10,062 32.80 4.76
D6R Series 3 508 20 2.70 4200 66.60 9.62560 22 2.98 4620 60.30 8.74610 24 3.25 5040 55.30 8.02
D6R Series 3 XL 508 20 2.92 4520 67.50 9.79560 22 3.22 4972 61.40 8.90610 24 3.50 5424 56.30 8.16
D6R Series 3 XW 610 24 3.50 5424 57.90 8.40760 30 4.36 6780 46.30 6.72
D6R Series 3 LGP 810 32 5.31 8256 40.00 5.80915 36 5.99 9288 35.50 5.15991 39 6.49 10,062 32.80 4.76
DS Differential Steer
MODELSHOE WIDTH
CONTACT AREA
GROUND PRESSURE
mm in m2 in2 kPa psiD6T XL 508 20 2.88 4465 69.64 10.10
560 22 3.18 4922 63.16 9.16610 24 3.46 5361 57.98 8.41
D6T XW 508 20 2.88 4465 72.53 10.52610 24 3.46 5361 60.40 8.76710 28 4.03 6240 51.92 7.53760 30 4.31 6679 48.47 7.03
D6T LGP 610 24 3.97 6146 54.54 7.91760 30 4.94 7657 43.78 6.35790 31 5.14 7959 42.06 6.10915 36 5.95 9219 36.34 5.27991 39 6.44 9984 33.58 4.87
D6T XL(Tier 4 Interim/Stage IIIB)
508 20 2.88 4465 70.40 10.21560 22 3.18 4922 63.91 9.27610 24 3.46 5361 58.61 8.50
D6T XW(Tier 4 Interim/Stage IIIB)
508 20 2.88 4465 73.29 10.63610 24 3.46 5361 61.02 8.85710 28 4.03 6240 52.47 7.61760 30 4.31 6679 49.02 7.