“A secure protection”

10 - 11

SANDOR

SANDOR DUAL

SANDOR QUAD

SANDOR ESA

SANDOR WS

SANDOR PLUS

A family of barriers with structure made of anticorodal anodized alumi-

num and polycarbonate front, small-sized and with a pleasant design,

and is made up of three different lines.

DUAL - QUAD - ESAEspecially studied and recommended for the protection of very wide

surfaces such as glass panels, thanks to the high capacity and the

particularity of the crossed beams that form a sort of grid. Each si-

gnal emitted by the transmitters is received by all the receivers. The

detection takes place in differentiated manner: when only one ray is

interrupted, the time to activate the alarm is delayed, while when two

or more rays are interrupted, it is immediate. Synchronization is optical.

PLUSThe barrier derived in terms of electronics and management from the

PARVIS MES, barriers, only changing the physical structure, making it

therefore compatible with the line of PARVIS MES and MANA IR bar-

riers (see characteristics).

WSThe wireless version of the SANDOR, line, that can be interfaced with

the most common radio alarm transmitters available on the market,

thanks to the alarm and tampering exits in N.C contact, commanded

by bi-stable relays with low absorption. The autonomy varies based on

the number of rays (max. 3 years). The low battery signal is given by

buzzer.

SANDOR SMA

“The little infrared barrier with long range”

Horizontal alignament angle 180°

Vertical alignament angle 20°

Wall mountingWall mounting Pole mounting Brack insertioning on aluminium frame

NEW TOP CAP WITH 4 CABLE GLANDS

MOD. QUAD 16-crossed beams

MOD. ESA 36-crossed beams

MOD. DUAL 4-crossed beams SANDOR PLUS

SANDOR WS SANDOR WS

SANDOR PLUS

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

SANDOR PLUS

TXRX

TX

TX

TX

RX

RX

RX

SANDOR PLUS RP

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

SANDOR PLUS SMA

SANDOR

DUAL SMA

QUAD/ESA SMA

NEW SANDOR SMA

DUAL SMA OPTICAL LENS

The new SMA (single man alignment) technology allows for alignment

by a single operator, as the high brightness LEDs and buzzer for each

optical lens can reach maximum value without use of additional instru-

mentation. Alignment is achieved simply via a button located on each

optical lens.

NUOVA OTTICA SMA RX

HEATERS POWER SUPPLY AT 12 OR 24 Vac / Vcc

BUTTON ACTIVATED ALIGNMENT

HIGH BRIGHTNESS LEDSVISIBLE AT 200m

BUZZER

• Crossed or parallel beams.

• Optical synchronism channel selector.

• Environmental disqualification from fog.

• AND random or first 2 optical.

• Power supply 10-30 Vcc.

• Heaters power supply 10-30 Vac/Vcc

The new SANDOR SMA allows use

of more than one barrier along the

same line, as it is equipped with 4 dif-

ferent frequency channels.

PERFORMANCE

• Random delay.

• Parallel and crossed beams.

• Environmental disqualification from fog.

• AND-OR random or first two beams.

• Beam 1 or first 2 exclusion.

• Wire or optical synchronism.

• Anti-masking with OC signal.

• Dragging protection.

• Adjustable crossing time.

• 4 optical synchronism channels.

• LED exclusion.

• RS485 connection.

Tracking and alignment system Test point SMA technology via high

on each beam brightness LED and Buzzer

Optical excursion 180° horizontal and 20° vertical

Operating mode settable OR: single beam

on board or via remote AND Random AND Random

(random of two beams) (random of two beams)

Response time 250ms fixed Adjustable 50/500ms 250ms fixed Adjustable 50/500ms

Beam exclusion mode, NO YES NO YES

can only be set via board

LED activation Can be excluded with dip

Optional mounting accessories Pole with base, pole and/or wall brackets

Accompanying manuals Instructions manual with application example figures

Warranty Integral 2 years for manufacturing defects

Maximum internal distance of use 300 m 300 m 300 m 400 m 400 m 400 m

Maximum external distance of use 80 m 80 m 80 m 100 m 100 m 100 m

Minimum installation distance

between columns TX and RX

Column height 1 m 4m 4m No limit

Column height 1.5 m 6m 6m Can function with

Column height 2 m 8m 8m parallel beams

Synchronization Optical lens Optical lens with 4 different channels

Optical lens with dual beam YES with 35mm in AND lenses

Photo devices Pulsed beams in working wave 950 NM

Maximum double beam 2TX + 2RX 4TX + 4RX 6TX + 6RX 2TX + 2RX 4TX + 4RX 6TX + 6RX

configuration inside column

Beam arrangement (4 beams) (16 beams) (36 beams) (2 beams) (4 beams) (6 beams)

crossed crossed crossed parallel or parallel or parallel or

(4 beams) (16 beams) (36 beams)

crossed crossed crossed

Circuit power supply 13,8 Vcc 10 - 30 Vcc

Circuit absorption per pair 135mA 150mA 210mA 135mA 150mA 210mA

Heater power supply 24 Vac 12 - 24 Vac - cc

Thermostat heater absorption 30 W (*) 50 W 80 W 35 W 55 W 85 W

per column

Operating temperature from -25° to + 65° C

Alarm outputs Relay with NC/NO free contacts (on right column)

Column opening tamper protection Tamper protection output

Environmental disqualification from fog NO YES with special OC output

Degree of protection IP54

Size Diam. xH 60 mm x 60 mm from 500mm to 4000mm

CH

ARA

CTE

RIS

TIC

S TE

CH

NIC

AL

CH

ARA

CTE

RIS

TIC

S TE

CH

NIC

AL

SANDOR TECHNICAL CHARACTERISTICS

DUAL QUAD ESA DUAL QUAD ESA

SANDOR NEW SANDOR SMA

SANDOR FUNCTIONAL PERFORMANCE

DUAL QUAD ESA DUAL QUAD ESA

SANDOR NEW SANDOR SMA

Maximum internal distance of use 400 m 150 m

Maximum external distance of use 100 m 40 m

Synchronization Wire Wire or Optical Optical lens

Optical lens with dual beam YES with 35mm in AND lenses

Photo devices Pulsed beams in working wave 950 NM

Maximum double beam 4TX + 4RX 2TX + 2RX o 4TX + 4RX

configuration inside column

Beam arrangement Parallel

Circuit power supply 13,8 Vcc 10 - 30 Vcc 3.6V 19Ah batteries included

Circuit absorption From 135 to 150 mA per column, From 0.5 to 1 microA per column,

based on the number of beams based on the number of beams

Heater power supply 24 Vac 12 - 24 Vac - cc Not required

Thermostat heater absorption From 30 to 50 W per column, based on the number of beams 0

Operating temperature from -25° to + 65° C

Alarm outputs Relay with NC/NO free contacts Low absorption micro relay

with NC/NO free contacts

Tamper protection output Column opening tamper protection

Environmental disqualification from fog YES with special OC output (signal attenuation at 90%) Yes but without a special output

Beam anti-masking YES with special OC output NO

RS 485 serial output NO YES for local and remote control

on universal resident interface,

owner and not, combined with

management software

Degree of protection IP54

Profile size LxWxH 60mm x 60 mm from 500 to 4000mm

Heights on request and compatibility with PARVIS and MANA

Tracking and alignment system Test point SMA technology via high Test point

on each beam brightness LED and Buzzer on each beam

Optical excursion 180° horizontal and 20° vertical

Operating mode settable OR: single beam

on board or via remote AND Random (random of two beams)

AND 1st and 2nd beam (if there are 4 beams in a column)

Dragging protection Settable on the first bottom beam NO

Response time Adjustable 50/500ms

Time delay function Random 0 or 2 seconds (can be activated via dip)

Beam exclusion mode settable 1st beam at the bottom

on board or via remote 1st and 2nd beam at the bottom NO

Temporary total for 1 minute

LED activation Can be excluded with dip

Optional mounting accessories Pole with base, pole and/or wall brackets

Accompanying manuals Instructions manual with application example figures

Warranty Integral 2 years for manufacturing defects

CH

ARA

CTE

RIS

TIC

S TE

CH

NIC

AL

CH

ARA

CTE

RIS

TIC

S TE

CH

NIC

AL

SANDOR TECHNICAL CHARACTERISTICS

SANDOR PLUS SANDOR PLUS SMA SANDOR WSESA

ESA SANDOR PLUS SANDOR PLUS SMA SANDOR WS

SANDOR FUNCTIONAL PERFORMANCE