Series 30,000 Rotary Process Valvecryogenic, high temperature and jacketed configuration

Tyco reserves the right to change the contents without notice VANLT-0004-EN-9906

valves & controls!@#$

The Vanessa Series 30,000 is manufactured indifferent configurations to satisfy various servicerequirements.

FeaturesCryogenic Valves A cryogenic valve suitable to stand

temperatures down to -254C. The cryogenic valve design including

the extended bonnet allows for thepipe insulation of the body. Thedistance of the packing from theservice temperature has beenincreased to minimise the risk forfugitive emissions.

Vanessa cryogenic valves are typeapproval tested according to Shell Tec.Spec. no. T-2.253.730, up to ANSIclass 600.

All valves are tested in the fullyequipped facilities for cryogenic testingat Vanessa plant (up to DN 66).

High Temperature Valves Ideal when the temperature range

raises up to +600, since it allows forvalve body insulation.

The extended bonnet helps maintainthe packing operating temperature atnormal levels. The packing is thereforedistanced from the hot medium, andthis highly reduces any risk for fugitiveemissions.

The actuator remains protected fromextremely high line temperature.

The reliability of the valve performanceis guaranteed by the appropriate hightemperature materials selection.

Jacketed Valves To prevent any fluid crystallisation. The heat diffused by valve body jacket

reaches all the critical areas, inparticular the valve seat and thebearings area.

The jacketed valve is manufactured inthe double flanged body style.Vanessa recommends the installationof double flanged style with long face-to-face, which magnifies the heatingaction.

Technical dataPressure Ratings : from ANSI/ASME

150 to 900. Body materials : carbon, alloy and

stainless steels,duplex steels,special alloys.

Temperature (C) : Cryogenic downto -254C,High temp. up to800C, Jacketedup to +450C.

Sizes (mm) : from 80 to 1650and larger.

General applicationCryogenic configuration is ideal for anyapplication involving media at very lowtemperatures, such as LNG, LPG,liquid hydrogen and liquid oxygen.The high temperature configuration iswidely used in oil and gas processing,power and chemical fields, usually forservices involving hot gases andsteam.The jacketed configuration is targetedto usage in sulphur recovery units, andin any application with high fluidcrystallisation risk.

A @ INTERNATIONAL LTD. COMPANY

Vanessa Series 30,000 Rotary Process Valvecryogenic configuration

Tyco reserves the right to change the contents without notice

Materials selection

Item Note Description Material

1a Body ASTM A 351 CF8M

1b Body Seat Stellite Gr.21 Weld Overlay2a q Disc ASTM A 351 CF8M or

ASTM A 182 gr. F3162b Retainer Flange AISI 3162c Screw ISO 3506 A4 (AISI 316)3a l Seal Ring UNS S20910 or UNS S218003b l Disc Spiral Wound Gasket AISI 316 + Graphite4a Shaft ASTM A479 Type XM194b Disc Key UNS S209104c Pin UNS S209104d Pin Retainer AISI 3165a l Packing Graphite5b Spacer AISI 3165c Packing Bushing AISI 3165d Stud Nut ISO 3506 A2 (AISI 304)5e Stud Bolts ISO 3506 A2 (AISI 304)6a q Bottom Flange ASTM A 351 CF8M or

ASTM A 240 gr. F3166b Screw ISO 3506 A2 (AISI 304)6c l Bottom Spiral Wound Gasket AISI 316 + Graphite7a Thrust Bearing UNS S209107b Thrust Bearing Washer AISI 3167c Key AISI 3167d Screw ISO 3506 A4 (AISI 316)7e Unloosening Washer AISI 3168a Bearing Aisi 304 Hard Faced9a Bracket Carbon Steel9b Screw Alloy Steel10a Bonnet ASTM A351 gr. CF8M or

AISI 316 Fabricated10b Bearing AISI 304 Hard Faced10c Screw ISO 3506 A2 (AISI 304)10d Bonnet Spiral Wound Gasket AISI 316 + Graphite

Extended bonnet

Notes

1.Trim A: D p max. 10 bar.Trim B: D p max. 25 bar.Trim C: D p max. 50 bar.Trim D: D p max. 110 bar.Trim E: D p max. 160 bar.

2. Dimensions are in mm and weight is in kilos.3. Other materials are available on request.q The selection between cast or forged

material depends on valve size.l Suggested Spare Parts.

80 3 250 6 250 6 250 6 - -100 4 250 7 250 7 250 8 - -150 6 300 10 300 12 300 16 300 19200 8 300 13 300 20 300 28 300 36250 10 350 18 350 24 350 39 350 52300 12 350 28 350 30 350 64 350 79350 14 450 30 450 37 450 87 450 112400 16 450 38 450 58 450 110 450 145450 18 450 50 450 68 450 138 450 190500 20 450 56 450 89 450 171 450 225600 24 450 74 450 131 450 197 450 250700 28 450 120 450 175 450 240 - -750 30 500 165 500 206 500 270 - -800 32 500 190 500 237 500 320 - -900 36 500 216 500 270 - - - -1000 40 500 250 500 300 - - - -1050 42 500 271 500 325 - - - -1200 48 500 320 500 385 - - - -

Extended bonnet - dimensions and weightSize Trim B Trim C Trim D Trim E

mm in. H Bonnet Weight H Bonnet Weight H Bonnet Weight H Bonnet Weight

Options (available upon request)

Bearing Protector

8b Bearing Protector Reinforced GraphiteBearing and Packing Flushing

5h Lantern Ring AISI 3165m Plug AISI 316

Live Loaded Packing5n Belleville Spring Alloy Steel

Tyco reserves the right to change the contents without notice

Vanessa Series 30,000 Rotary Process Valvehigh temperature configuration

Materials selection

Item Note Description Body in CF8M

1a Body ASTM A 351 CF8M

1b Body Seat Stellite gr.21 Weld Overlay2a q Disc ASTM A 351 CF8M or

ASTM A 182 gr. F3162b Retainer Flange AISI 316 2c Screw ASTM A 453 gr. 6603a l Seal Ring UNS S20910 or UNS S218003b l Disc Spiral Wound AISI 316 + Graphite

Gasket 4a Shaft ASTM A479 Type XM194b Disc Key UNS S20910 4c Pin UNS S20910 4d Pin Retainer AISI 3165a l Packing Graphite5b Spacer AISI 3165c Packing Bushing AISI 3165d Stud Nut ISO 3506 A2 (AISI 304)5e Stud Bolts ISO 3506 A2 (AISI 304)6a q Bottom Flange ASTM A 351 CF8M or

ASTM A 240 gr. F3166b Screw ASTM A 453 gr. 6606c l Bottom Spiral Wound AISI 316 + Graphite

Gasket7a Thrust Bearing UNS S209107b Thrust Bearing Washer Stellite gr 217c Key AISI 3167d Screw ASTM A 453 gr. 6607e Unloosening Washer AISI 316 8a Bearing AISI 316 Hard Faced9a Bracket Carbon Steel9b Screw Alloy Steel10a Bonnet ASTM A 351 CF8M10b Bearing AISI 304 Hard Faced 10c Screw ASTM A 453 gr. 66010d Bonnet Spiral AISI 316 + Graphite

Wound Gasket

80 3 150 5 150 5 150 6 - -100 4 150 6 150 6 150 7 - -150 6 150 8 150 10 150 13 150 16200 8 150 11 150 17 150 23 150 30250 10 150 15 150 20 250 33 250 42300 12 150 23 150 25 250 42 250 55350 14 150 25 150 31 250 54 250 96400 16 150 32 150 49 250 80 250 120450 18 250 41 250 54 250 126 250 150500 20 250 47 250 70 350 168 350 180600 24 250 64 250 110 350 208 350 220700 28 300 87 300 135 350 230 - -750 30 300 118 300 150 350 250 - -800 32 300 140 300 180 - - - -900 36 300 160 300 210 350 310 - -

1000 40 300 180 300 230 - - - -1050 42 300 210 300 250 - - - -1200 48 300 230 300 280 - - - -

Extended bonnet

Notes

1. Trim A: D p max. 10 bar.Trim B: D p max. 25 bar.Trim C: D p max. 50 bar.Trim D: D p max. 110 bar.Trim E: D p max. 160 bar.

2. Dimensions are in mm and weight is in kilos.3. Other materials are available on request.q The selection between cast or forged

material depends on valve size.l Suggested Spare Parts.

Extended bonnet - dimensions and weightSize Trim B Trim C Trim D Trim E

mm in. H Bonnet Weight H Bonnet Weight H Bonnet Weight H Bonnet Weight

Options (available upon request)Bearing Protector

8b Bearing Protector Reinforced GraphiteBearing and Packing Flushing

5h Lantern Ring AISI 3165m Plug AISI 316

Live Loaded Packing5n Belleville Spring Alloy Steel

Tyco reserves the right to change the contents without notice

Vanessa Series 30,000 Rotary Process Valvejacketed configuration

Materials selection

Item Note Description Material1a Body ASTM A216 WCB 1b Body Seat Stellite gr.21 Weld Overlay1m Flanged Fitting ASTM A1051n Body Jacket ASTM A515 gr.602a q Disc ASTM A216 WCB or

ASTM A105 2b Retainer Flange ASTM A5162c Screw ISO 3506 A4 (AISI 316)3a l Laminated Seal Ring UNS S31803 (Duplex) +

Graphite3b l Disc Spiral Wound AISI 316 + Graphite

Gasket4a Shaft ASTM A182 F6a 4b Disc Key AISI 4104c Pin AISI 4104d Pin Retainer AISI 3165a l Packing Graphite5b Spacer AISI 3165c Packing Bushing AISI 3165d Stud Nut ISO 3506 A2 (AISI 304)5e Stud Bolts ISO 3506 A2 (AISI 304)5h Lantern Ring AISI 3165m Plug AISI 3166a Bottom Flange ASTM A5166b Screw ISO 3506 A2 (AISI 304)6c l Bottom Spiral Wound AISI 316 + Graphite

Gasket7a Thrust Bearing AISI 316 or AISI 410 7b Thrust Bearing Washer AISI 316 7c Key AISI 3167d Screw ISO 3506 A4 (AISI 316)7e Unloosening Washer AISI 410 8a Bearing AISI 304 Hard Faced8b Bearing Protector Reinforced Graphite9a Bracket Carbon Steel9b Screw Alloy Steel

Heating connections Auxiliary condense drainage Notes

1. For DN up to 12 (ANSI drilling), the heatingconnection flange dim. is 1/2 Cl. 300 ANSIB16.5, RF 125250 inch. For DN up to300 mm (DIN and ISO 7005 drilling), theheating connection flange dim. is DN 15PN 40, RF 12,525 m.

2. For DN from 14 and larger (ANSI drilling),the heating connection flange dim. is 3/4Cl. 300 ANSI B16.5, RF 125250 inch.For DN from 350 mm and larger (DIN andISO 7005 drilling), the heating connectionflange dim. is DN 20 PN 40, RF 12,525m.

3. For DN up to 12, the auxiliary condensedrainage (P) is 3/8 NPT.For DN from 14 and larger, the auxiliarycondense drainage (P) is 1/2 NPT.

4. Vanessa recommends the horizontal shaftinstallation.

5. Other materials are available on request.q The selection between cast or forged

materials depends on valve size.l Suggested spare parts.

Options (available upon request)Live Loaded Packing

5n Belleville Spring Alloy SteelSeal Ring

3a l Seal Ring UNS S17400