catalogo de cangilones

7/27/2019 Catalogo de Cangilones

1/16


2/16

16400 Midway Rd. (75244)P.O. Box 700008

Dallas, Texas 75370-0008

Toll Free North America1-800-851-9116

LOCAL: 972-735-8631

FAX: 972-735-8896

-2-

DALLAS, TEXAS

ADVANTAGES AND USES OF DURA-BUKET..................................3

PLASTIC ELEVATOR BUCKETSStyle SS and Style LP Materials and Benefits ........................4

SUPER STRENGTH BUCKETSStyle SS ......................................................................................5

LOW PROFILE BUCKETSStyle LP........................................................................................6

ELEVATOR BOLTS

Standard, Sabre-Tooth

and Reliance ......................................7

ELEVATOR WASHERS, NUTS AND SPACERS ..................................8

ENGINEERING SPECIFICATIONSTable of Speeds ..........................................................................9Capacity Estimation....................................................................9Cup Spacing Multiplier Chart....................................................9Capacity Formulas......................................................................9

VENTING OPTIONS; INSTALLATION ..............................................10

QUESTIONNAIRE; DIGGER BUCKETS ............................................11

STANDARD DUTY STEEL, STYLE CC ..............................................12

HANGER BEARINGSStyle A, Style B, Style C ..........................................................13

DRAG CONVEYOR FLIGHTS AND UHMW SHEETINGScrew Conveyor ......................................................................14Essmueller ................................................................................14

Thomas Conveyor ....................................................................14J effrey........................................................................................14Ehrsam ......................................................................................14Enmasse....................................................................................14UHMW Sheeting ......................................................................14

MAXI-SPLICE BELT FASTENING DEVICE ........................................15

TABLE OF CONTENTS


3/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896DALLAS, TEXAS

-3-

Compare Dura-Buket Plastic Elevator Buckets with other elevator buckets on the market today! Thisoriginal plastic elevator bucket is backed by more than 45 years of successful customer experience.

COMPARE THE ADVANTAGES

SOME OF THE M ANY DURA-BUKET USES RECOMM ENDED FOR THESE SPECIFIC

AGRICULTURAL PRODUCTS:

Re c om m en de d A n im al By -P ro duc t s B re w e ry P ro duc t s C h errie sbut not restricted C itrus Pulp C offee Feed and Grainto handling these Fert ilizer Nuts Pic k lesspec if ic produc ts S alt S eeds S ugar

ADVANTAGES AND USES OF DURA-BUKET

SS BUCKET

1.Shatterproof high densitypolyethylene, nylon andurethane construction, whichwill not rust or corode.

7.Tolerant to a

wide range temperature

(-120 to

+180 F.)

Plastic resin used is approved by Food & DrugAdministration for food handling.

8.Forty-five degreeangle for better cufill and discharge.

9.Built in give sothat leading edgeswill not abradeaway or cut productof any kind.

5.Lightweight andcompact to put lessload on belt orchain.

6.Sparkproofwhenscrappingor hittingmetal.

4.Unique design tocure back-legging.

3.Impact toughbut flexible togive whencoming incontact withtramp material.

2.Slick surfaceeliminates cakingof product.


4/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-4-

DALLAS, TEXAS

COLOR

APPLICATION

TEMPERATURERANGE

FDA APPROVEDMATERIAL

COMMENTS

Red

Heavy abrasion,sticky materials

-60F to +180F

(210F intermittent)

Yes

Most flexible and abrasionresistant. Resists productsticking and sharp cutting

particles.

Black or White

Grain & food products

-120F to +180F

(210F intermittent)

Yes

Economical, high density poly-ethylene. FDA approved mate-

rial for handling food gradeproducts.

As available

Product conditions notsuitable for In Stock

bucket materials.

As required

As required

Engineered for specific require-ments, such as extreme

temperature, abrasion, color orproduct discharge.

MATERIA LS URETHA NEHD POLYETHYLENE S PEC IA L RES INS

This photo indicates the clean superior discharge of Dura-Buket plastic buckets. Picturedis a 9 x 6 plastic Dura-Buket running on a 30 head pulley at 62 RPMs for a belt speedof 487 FPM. This is an LP style bucket spaced on 4-3/8 centers.

STYLE SSExtensive testing has proven that the SS bucketscan be placed on closer cup centers than what hasbeen recognized in the industry. The SS cups areuniquely designed at a 45 angle, allowing bettercup fill and discharge.

STYLE LPThe LP cup has been modified on the back wall, thusreducing the cup depth. The main advantage ofDura-Buket LP bucket is that it can increase capacitiesup to 50% in existing elevator legs. This modificationdoes not change the discharge characteristic associat-ed with the original Dura-Buket SS bucket.

PLASTIC ELEVATOR BUCKETS

Tan

Hot, high impact, abrasivedense products

-60F to +300F

(350F intermittent)

Best for high heatapplications, with tough

impact and abrasion needs.

Available uponrequest

NYLON


5/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-5-

STYLE SS DURA-BUKET PLASTIC BUCKETS

BucketSize

4X35X4

6X4

7X4

6X5

7X5

8X5

9X5

8X6

9X6

10X6

11X6

12X6

13X6

10X7

11X7

12X7

13X7

14X7

15X7

16X7

12X8

14X8

16X8

18X8

Top BackTo E

Centers

11

1

1

1-1/4

1-1/4

1-1/4

1-1/4

1-1/4

1-1/4

1-3/4

1-3/4

1-3/4

1-3/4

1-3/4

1-3/4

1-3/4

1-3/4

1-1/2

1-1/2

1-1/2

1-3/4

1-1/2

2

2

Numberof

Holes

22

2

3

2

3

3

3

3

3

3

4

4

4

3

4

4

4

5

5

5

4

5

5

6

SizeBolt

Holes

9/329/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

9/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

L *Length

4-1/45-1/4

6-1/4

7-1/4

6-3/8

7-3/8

8-3/8

9-3/8

8-3/8

9-3/8

10-3/8

11-3/8

12-3/8

13-3/8

10-3/8

11-3/8

12-3/8

13-3/8

14-3/8

15-3/8

16-3/8

12-3/8

14-3/8

16-3/8

18-3/8

CCenters

2-1/43-3/16

4-3/8

2-11/16

4-3/8

2-5/8

3-1/16

3-1/4

3-1/16

3-1/2

4

3

3-3/8

3-5/8

4

3

3-3/8

3-5/8

3

3-1/4

3-1/2

3-3/8

3

3-1/2

3-1/8

Weight,Pounds

.20

.31

.37

.40

.50

.63

.70

.74

1.08

1.16

1.22

1.34

1.70

2.00

1.75

1.90

2.10

2.25

2.50

2.59

2.67

2.50

2.80

3.20

3.50

H2OLevelX -X

10.4

24.4

30.8

33.6

47.1

61.6

67.7

69.6

104.4

124.5

128.2

147.7

172.1

196.5

175.8

210.5

223.2

236.8

269.7

284.4

289.9

272.5

324.7

362.5

404.9

Useable5 Over

X -X

11.0

29.9

33.1

36.7

52.0

62.4

69.8

77.1

107.7

132.2

145.8

157.9

183.6

208.7

187.3

216.7

241.1

244.8

290.1

295.0

304.8

299.9

364.8

407.6

440.6

NumbePe r

Carton

24

24

24

24

24

24

24

24

24

24

24

24

12

12

24

24

12

12

12

12

12

12

12

12

12

PProjec.

3-1/84-1/8

4-1/8

4-1/8

5-1/4

5-1/4

5-1/4

5-1/4

6-3/8

6-5/8

6-3/8

6-3/8

6-3/4

6-3/4

7-3/8

7-3/8

7-3/8

7-3/8

7-3/8

7-3/8

7-3/8

8-3/8

8-3/8

8-3/8

8-3/8

DDepth

33-3/4

3-3/4

3-3/4

4-7/8

4-7/8

4-7/8

4-7/8

6-1/4

6-1/4

6-1/4

6-1/4

6-1/2

6-1/2

7-1/4

7-1/4

7-1/4

7-1/4

7-1/4

7-1/4

7-1/4

8-1/4

8-1/4

8-1/4

8-1/4

DIMENSIONS PUNC HING ** C A PA C ITY C U. IN.

SUPER STRENGTH BUCKETS

X X

LENGTH

CENTERS

PROJ ECTION

DEPTH

E

5

STYLE SS SPACING

The minimum spacing of Dura-Buket SS plastic buckets on a belt is as follows:

4x3...........................................................................................................4 inches5x4 6x4 7x4 ...................................................................................5 inches6x5 7x5 8x5 9x5.......................................................................6 inches8x6 9x6 10x6 11x6 12x6 13x6.........................................7 inches10x7 11x7 12x7 13x7 14x7 15x7 16x7......................8 inches12x8 14x8 16x8 18x8.................................................................9 inches

USABLE CAPACITY

Under normal usage, the style SSplastic bucket will carry and deliverwater level +5. Dura-Buket divisionrecommends that water level capacitybe used for design and engineeringpurposes.

AVAILABLE IN BLACK OR WHITE

* Buckets with 12 lengths and up have a center brace.**Special punching available upon request.


6/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-6-

DALLAS, TEXAS

X X

LENGTH

CENTERS

PROJ ECTION

DEPTH

E

5

STYLE LPSPACING

The minimum spacing of Dura-Buket LP plastic buckets on a belt is as follows:

4x3...........................................................................................................3 inches5x4 6x4 7x4 ...................................................................................3-1/4 inches6x5 7x5 8x5 9x5.......................................................................3-3/4 inches8x6 9x6 10x6 11x6.....................................................................4-3/8 inches12x6 13x6...........................................................................................5 inches10x7 11x7 12x7 13x7 14x7 15x7 16x7......................5 inches12x8 14x8 16x8 18x8.................................................................5-1/2 inches

USABLE CAPACITY

Under normal usage, the style LP plasticbucket will carry and deliver water level+5 of the gross cubic inch capacity.Dura-Buket division recommends thatwater level capacity be used for designand engineering purposes.

STYLE LP DURA-BUKET PLASTIC BUCKETS

BucketSize

4X35X4

6X4

7X4

6X5

7X5

8X5

9X5

8X6

9X6

10X6

11X6

12X6

13X6

10X711X7

12X7

13X7

14X7

15X7

16X7

12X8

14X8

16X8

18X8

Top BackTo E

Centers

11

1

1

1

1

1

1

1

1

1

1

1

1

11

1

1

1

1

1

1-1/4

1-1/4

1-1/4

1-1/4

Numberof

Holes

22

2

3

2

3

3

3

3

3

3

4

4

4

34

4

4

4

6

6

4

4

6

6

SizeBolt

Holes

9/329/32

9/32

9/32

9/32

9/32

9/32

9/32

11/32

11/32

11/32

11/32

11/32

11/32

11/3211/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

11/32

L *Length

45-1/8

6-1/8

7-1/8

6-1/8

7-1/8

8-1/8

9-1/8

8-1/8

9-1/8

10-1/8

11-1/8

12-1/8

13-1/8

10-1/811-1/8

12-1/8

13-1/8

14-3/8

15-1/8

16-1/8

12-1/8

14-1/8

16-1/8

18-1/4

CCenters

2-1/43-3/16

4-1/4

2-5/8

4-1/4

2-5/8

3-1/16

3-1/4

2-11/16

3-1/2

4

2-7/8

3-1/4

3-5/8

43

3-1/4

3-5/8

4

2-5/8

2-5/8

3-1/4

4

2-5/8

3-1/8

Weight,Pounds

.16

.24

.30

.32

.46

.48

.62

.65

.78

.84

.91

.95

1.42

1.66

1.171.26

1.52

1.67

1.88

1.90

2.14

1.84

1.97

2.64

2.98

H2OLevelX -X

10.424.4

30.8

33.6

47.1

61.6

67.7

69.6

104.4

124.5

128.2

147.7

172.1

196.5

175.8210.5

223.2

236.8

269.7

284.4

289.9

272.5

324.7

362.5

404.9

Useable5 Over

X -X

11.029.9

33.1

36.7

52.0

62.4

69.8

77.1

107.7

132.2

145.8

157.9

183.6

208.7

187.3216.7

241.1

244.8

290.1

295.0

304.8

299.9

364.8

407.6

440.6

NumberPe r

Carton

2424

24

24

24

24

24

24

24

24

24

24

12

12

2424

12

12

12

12

12

12

12

12

12

PProjec.

3-1/84-1/8

4-1/8

4-1/8

5-1/4

5-1/4

5-1/4

5-1/4

6-3/8

6-5/8

6-3/8

6-3/8

6-3/4

6-3/4

7-3/87-3/8

7-3/8

7-3/8

7-3/8

7-3/8

7-3/8

8-3/8

8-3/8

8-3/8

8-3/8

DDepth

33

3

3

3-3/4

3-3/4

3-3/4

3-3/4

4-1/2

4-1/2

4-1/2

4-1/2

5

5

5-1/45-1/4

5-1/4

5-1/4

5-1/4

5-1/4

5-1/4

5-3/4

5-3/4

5-3/4

5-3/4

DIMENSIONS PUNC HING ** C A PA C ITY C U. IN.

LOW PROFILE BUCKETS

AVAILABLE IN BLACK OR WHITE

* Buckets with 12 lengths and up have a center brace.**Special punching available upon request.


7/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-7-

STANDARD ELEVATOR BOLT

SIZE,INCHES1/4 x 3/4

1/4 x 1

1/4 x 1-1/4

1/4 x 1-1/2

1/4 x 1-3/4

1/4 x 2

1/4 x 2-1/4

1/4 x 2-1/2

5/16 x 3/4

5/16 x 1

5/16 x 1-1/4

5/16 x 1-1/2

5/16 x 1-3/4

5/16 x 2

5/16 x 2-1/4

5/16 x 2-1/2

3/8 x 1-1/2

3/8 x 1-3/4

3/8 x 2

3/8 x 2-1/4

3/8 x 2-1/2

WEIGHTPER 100 PCS.,

POUNDS2.94

3.24

3.43

3.73

3.98

4.29

4.88

4.92

4.76

5.05

5.55

6.38

6.50

7.12

7.43

7.78

7.10

7.66

8.31

9.35

9.83

KE GQUANTITIES,

PCS.2400

2400

1800

1800

1200

1200

1200

1200

1200

1200

1200

900

900

900

900

900

900

600

600

600

600

C A S EQUANTITIES,

PCS.1200

1200

1200

1200

1200

1200

600

600

1200

1200

1200

600

600

600

600

600

600

600

600

600

600

SABRE-TOOTH ELEVATOR BOLT


1/4 x 1

1/4 x 1-1/4

1/4 x 1-1/2

1/4 x 1-3/4

1/4 x 2

1/4 x 2-1/4

1/4 x 2-1/2

5/16 x 3/4

5/16 x 1

5/16 x 1-1/4

5/16 x 1-1/2

5/16 x 1-3/4

5/16 x 2

5/16 x 2-1/4

5/16 x 2-1/2

3/8 x 1-1/2

3/8 x 1-3/4

3/8 x 2

3/8 x 2-1/4

3/8 x 2-1/2

WEIGHTPER 100 PCS.,

POUNDS2.94

3.24

3.43

3.73

3.98

4.29

4.88

4.92

4.76

5.05

5.55

6.38

6.50

7.12

7.43

7.78

7.10

7.66

8.31

9.35

9.83

KE GQUANTITIES,

PCS.2400

2400

1800

1800

1200

1200

1200

1200

1200

1200

1200

900

900

900

900

900

900

600

600

600

600

C A S EQUANTITIES,

PCS.1200

1200

1200

1200

1200

1200

600

600

1200

1200

1200

600

600

600

600

600

600

600

600

600

600

STANDARD

SABRE-TOOTH

RELIANC E ELEVATOR BOLT

WEIGHT

PER 100 PCS.,POUNDS

2.7

2.9

3.0

3.5

4.9


1/4 x 1

1/4 x 1-1/4

1/4 x 1-1/2

5/16 x 1-1/4

C A S E

QUANTITIES,PCS.1200

1200

1200

1200

1200

KE G

QUANTITIES,PCS.2400

2400

1800

1800

1200

C A S E

QUANTITIEPCS.1200

1200

1200

1200

1200

RELIANCE

DIAMETER LENGTH

DIAMETER

DIAMETER LENGTH

DIAMETER

DIAMETERDIAMETER LENGTH

DIAMETER

#1 Standard#1 Norway carbon steel, stainless steel

and zinc plated

Sabre-Tooth

#1 Norway with toothed head,carbon steel

zinc plated and stainless steel

Head Types#3 Reliance, carbon steel and

zinc plated

ELEVATOR BOLTS


8/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-8-

DALLAS, TEXAS

ELEVATOR WASHERS, NUTS AND SPACERS

FLAT SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4

5/16

3/8

100

100

100

.7

1.1

1.6

SPLIT RING LOCK SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4

5/16

3/8

100

100

100

.2

.4

.6

EXTERNAL TOOTH LOCK SIZEINCHES

(ID)

PKG.QTY.,

PCS.

PKG.WEIGHT,

LBS.1/4

5/16

3/8

100

100

100

.7

.7

.7

FENDER SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4

5/16

3/8

100

100

100

1.3

2.0

3.0

LEATHER - 1 /8 THIC K SIZEINCHES(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,LBS.

1/4

5/16

3/8

100

100

100

.3

.3

.3

STANDARD HEX SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4-20

5/16-18

3/8-16

100

100

100

.7

1.1

1.6

SQUARE SIZEINCHES(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,LBS.

1/4-20

5/16-18

3/8-16

100

100

100

.9

1.8

2.6

STANDARD FLANGESERRATED LOCK

SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4-20

5/16-18

3/8-16

100

100

100

.9

1.2

1.8

LARGE FLANGESERRATED LOCK

SIZEINCHES

(ID)

PKG.QTY.,

PCS.

PKG.WEIGHT,

LBS.1/4-20

5/16-18

3/8-16

100

100

100

1.2

2.3

2.8

NYLON INSERT LOCK SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4-20

5/16-18

3/8-16

100

100

100

.8

1.1

2.8

POLY SPACERS SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4

5/16

1/2

100

100

100

2.0

1.8

2.0

Available in zinc and stainless.


NEOPRE NE - 1/4 THICK SIZEINCHES

(ID)

PKG.QTY.,PCS.

PKG.WEIGHT,

LBS.

1/4

5/16

3/8

100

100

100

1.1

1.1

1.1


Available in zinc.


Available in polyethylene 1/4 and 1/2 thick.





WASHERS AND SPACERS NUTS


9/16

For Bushels Per Hour:Water Level

Capacity spacing number FPM min./hr. cu. in./bu. bu./hr.of Cup multiplier of row 60 2,150 water level________________x__________________x ________________x ________________x________________________________________= __________________

For Cubic Feet Per Hour:Water LevelCapacity spacing number FPM min./hr. cu. in./cu. ft.. bu./hr.of Cup multiplier of row 60 1,728 water levels________________x__________________x ________________x ________________x________________________________________= __________________

ForTons Per Hour First determine cubic feet using above formula, then proceed as follows:Cu. Ft./Hr. product weight lbs./ton tons/hr.Water Level per cu. ft. (lbs.) 2,000 water level________________x__________________________________= ________________

*For Low Profile buckets, Dura-Buket division recommends that water level capacity be used for design and engineering purposes.

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-9-ENGINEERING SPECIFICATIONS

How To Estimate Horsepower (HP)

HPO (at headshaft) = W x H33,000

W =Pounds per minute of material elevatedor bushels/hour x material wt./bushel

60 min./hour

H =Vertical lift in feet

The above formula will result in the theoretical horsepowernecessary. It is recommended that an additional 10% beadded for drive losses and up to 15% for elevator frictionand cup digging through the boot. To overcome chokedconditions, additional horsepower is required.

How To Calculate Belt Speed

Head Pulley Diameter in Inches xHead Pulley RPM x .262 =Feet Per Minute (FPM)

The cup projections used with the appropriate head pulleydiameters are common engineering practices. The table ofspeeds is for reference only and does not mean that thebuckets will discharge perfectly running at all speeds in thisrange. Minor variations are permissible.

To find the capacity of any elevator, it is necessary to ascertain the contents of the cup in cubic inches, the spacing of the cup on the belt anthe speed of the belt in feet per minute. To do this, multiply the contents of the cup by the number of cups per foot. If the cups are spacedon 6 centers, for example, you would multiple the cubic inch capacity times 2. If on 8 centers, you would multiply the cubic capacity by1.5; if on 10 centers, by 1.2, and on 12 centers, by 1. The results will give you the contents in cubic inches of every running foot of belt.Refer to the chart for other spacing multipliers.

This result is then multiplied by the belt speed which will give the cubic inches discharged per minute. The result multiplied by 60 gives adischarge in cubic inches per hour. Divide the results by 2,150 which is the contents in cubic inches in one bushel and you have the capacin bushels per hour. Divide by 1,728 for contents in cubic feet. To find the tons per hour elevated, you must know the weight of the materelevated per cubic foot.

[ ]

CUP SPACING MULTIPLIER CHART

HOW TO ESTIMATE THE CAPACITY OF AN ELEVATOR

Use Our Table for Contents of Elevator Cups

Spacingon belt 3 3 -1 /4 3-1/2 3-3/4 4 4 -3/8 5 5-1 /2 6 6-1/2 7 7 -1 /2 8 8 -1 /2 9 9-1 /2 10 11in inches

Multiplier 4 .0 0 3 .6 9 3 .4 3 3 .2 0 3 .0 0 2 .7 4 2 .4 0 2 .1 8 2 .0 0 1 .8 5 1 .7 1 1 .6 0 1 .5 0 1 .4 1 1 .3 3 1 .2 6 1 .2 0 1 .0 9

12 13 14 15 16 17

1 .0 0 .9 23 .8 6 .80 .75 .70 5 .

CAPACITY FORMULAS

TABLE OF SPEEDSRECOMMENDED PULLEY DIAMETERS & BELT SPEEDS

Recommended SpeedsBucketProj.

HeadPulleyDiam.

Minimum Maximum

Head Belt Head BeltPulley Speed, Pulley Speed,

Inches RPM FPM RPM FPM

3 10 85 224 160 4203,4 12 75 235 135 4243,4 16 55 230 100 418

3,4,5 18 55 259 90 4253,4,5 20 55 286 85 4433,4,5 22 55 316 80 4604,5,6 24 50 314 80 5024,5,6 30 42 330 80 6285,6,7 36 42 395 80 7695,6,7 42 40 439 70 7536,7,8 48 40 503 65 8176,7,8 54 40 565 65 919

6,7,8 60 40 628 60 9427,8 72 40 754 55 10367,8 84 34 748 50 10997,8 96 30 754 45 1130


10/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-10-

DALLAS, TEXAS

A. How To Measure:

For nominal dimen-

sions, lay the bucket

on its back. The

width of the bucket is

measured at the back

mounting surface.

B. Projection is

measured

vertically to the lip,

as it would project

from the belt or

chain.

C . Depth is

measured for

the overall side

profile

dimension.

Width=11 Projection=6 Depth=6

#1 Standard VentSame holes in body as boltmounting holes, plus a holein each end cap.

#2 VentTwice as many holes in bodyas bolt mounting holes.

#3 VentSame as #2, but two rows, orfour times as many holes asbolt mounting.

#4 VentSame as #3, plus three holesin each end cap.

BOLT

BELT

NUT

FLAT OR FENDERWASHER

LOCK WA SHER

RECOMMENDED BUCKET INSTALLATION

INSTALLATION INSTRUCTIONS

We recommend that the following instructions be followed to

assure you long lasting services.

Belt Application

1. Attach bucket to the belt with 1/4, 5/16 or 3/8 elevator bolts.Stainless steel or plated bolts are recommended for corrosive

materials.

2. Use a leather washer between the nut and the bucket when

handling corrosive materials to facilitate the removal of rusty

elevator bolts. On other materials a leather washer is not

necessary.

3. On non-corrosive materials, place a flat steel washer inside the

bucket (as large O.D. as possible). Follow with spring lock

washer and then either a hex or square nut.

4. Use power tool and tighten the elevator bolts until snug, then

use a wrench for the last two or three turns. Excessive pressure

is not necessary and should be avoided.

5. When removing the bolts from the elevator bucket, do not use a

cutting torch. Dura-Buket polyethylene buckets will become

soft at temperatures over 225 F.

VENTING OPTIONS; INSTALLATION

VENTING OPTIONS

MEASURE THE WIDTH, PROJECTION AND DEPTH OF A BUCKET


11/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-11-QUESTIONNAIRE; DIGGER BUCKETS

BUCKET ELEVATOR QUESTIONNAIRE

DIGGER BUCKETS

For more complete bucket elevator engineeringassistance, the following information is required

Current Bucket Size _______________________ A_______________Bucket Spacing _______________________ B_______________Current Bucket Style _______________________ C_______________Product _______________________ D_______________ Density _______________________ E _______________ Moisture _______________________ F _______________ Oil/Fat _______________________ G ______________ Particle Size _______________________ H_______________Product Temperature _______________________ I _______________Current Capacity _______________________ J _______________Required Capacity _______________________ K_______________Head Puller Diameter _______________________ L _______________

Head Pulley Width _______________________ M ______________Boot Pulley Diameter _______________________ N ______________Head Shaft RPM _______________________ O ______________Belt FPM _______________________ P _______________ Feed Direction _______________________ Q ______________

R_______________

A

G

F

JH K

D

O

R

B

QN

C

E

L

M P

DIMENSIONS

CC DIGGER

USESUsed to extend the life of any plastic

bucket or with any materials that packor cake tightly in the boot section.

PURPOSEA digger bucket clears the path through

the elevator boot section and eases the

strain on the following plastic buckets.

Digger buckets are mounted every

tenth to every fifth between the plastic

buckets and are custom-manufactured

to project 1/4 to 1/2 further than the

plastic buckets.

MATERIALSCarbon steel or stainless steel.


12/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-12-

DALLAS, TEXAS

STANDARD DUTY STEEL, STYLE CC

HIGH SPEED METAL ELEVATOR BUCKETS

L

E

P

D

C

E

Mounting holes and venting to your specifications.

CC ELEVATOR BUCKETS

Bucket Size, InchesE Number Bolt Approx. Cap. Number

Bucket P Centers of C D Sizes Weight Cu. Per Size Projection (Inches) Holes (Inches) (Depth) (Inches) Gauge (Lbs.) (Inches) Carton

4x3 3-3/16 2-1/2 2 7/8 4 1/4 16 .62 22 84

4x4 4-3/16 2-1/2 2 1-3/4 4 1/4 18 .90 39 84

5x4 3-3/16 3-3/16 2 1-3/4 4 1/4 18 .95 52 84

6x4 4-3/16 4-3/8 2 1-3/4 4 1/4 18 1.10 62 84

7x4 4-3/16 2-11/16 3 1-3/4 4 1/4 18 1.25 70 84

8x4 4-3/16 3-1/16 3 1-3/4 4 1/4 18 1.50 79 84

9x4 4-3/16 3-5/8 3 1-3/4 4 1/4 18 1.70 90 56

6x5 5-1/4 4-3/8 2 1-7/8 5 1/4 16 1.60 94 54

7x5 5-1/4 2-11/16 3 1-7/8 5 1/4 16 1.75 110 54

8x5 5-1/4 3-1/16 3 1-7/8 5 1/4 16 2.00 125 54

9x5 5-1/4 3-5/8 3 1-7/8 5 1/4 16 2.50 140 36

10x5 5-1/4 4-1/8 3 1-7/8 5 1/4 16 2.70 155 36

11x5 5-1/4 3 4 1-7/8 5 1/4 16 2.90 170 36

12x5 5-1/4 3-3/8 4 1-7/8 5 1/4 16 3.00 185 36

7x6 6-5/16 2-11/16 3 2-3/16 6 1/4 16 2.85 155 36

8x6 6-5/16 3-1/16 3 2-3/16 6 1/4 16 3.10 178 36

9x6 6-5/16 3-5/8 3 2-3/16 6 1/4 16 3.40 202 24

10x6 6-5/16 4-1/8 3 2-3/16 6 1/4 16 3.50 222 24

11x6 6-5/16 3 4 2-3/16 6 1/4 16 3.75 244 24

12x6 6-5/16 3-3/8 4 2-3/16 6 1/4 16 4.00 267 24

13x6 6-5/16 3-5/8 4 2-3/16 6 1/4 16 4.50 289 24

14x6 6-5/16 3 5 2-3/16 6 1/4 16 4.75 312 24

8x7 7-3/16 3-1/16 3 3-3/16 7 5/16 14 4.60 242 24

9x7 7-3/16 3-5/8 3 3-3/16 7 5/16 14 4.80 276 24

10x7 7-3/16 4-1/8 3 3-3/16 7 5/16 14 5.00 302 16

11x7 7-3/16 3 4 3-3/16 7 5/16 14 5.25 333 16

12x7 7-3/16 3-3/8 4 3-3/16 7 5/16 14 6.25 362 16

13x7 7-3/16 3-5/8 4 3-3/16 7 5/16 14 6.75 393 16

14x7 7-3/16 3 5 3-3/16 7 5/16 14 7.00 424 16

15x7 7-3/16 3-1/4 5 3-3/16 7 5/16 14 7.50 454 8

16x7 7-3/16 2-7/8 8 3-3/16 7 5/16 14 8.00 486 8

18x7 7-3/16 3-1/8 6 3-3/16 7 5/16 14 8.50 544 8

20x7 7-3/16 3-1/2 6 3-3/16 7 5/16 14 9.25 605 8

22x7 7-3/16 4 6 3-3/16 7 5/16 14 10.00 664 8

24x7 7-3/16 3-1/2 7 3-3/16 7 5/16 14 10.75 725 8

9x8 8-1/8 3-5/8 3 3-1/2 8 5/16 14 5.60 349 16

10x8 8-1/8 4-1/8 3 3-1/2 8 5/16 14 6.10 388 1611x8 8-1/8 3 4 3-1/2 8 5/16 14 6.75 427 16

12x8 8-1/8 3-3/8 4 3-1/2 8 5/16 14 7.50 466 16

13x8 8-1/8 3-5/8 4 3-1/2 8 5/16 14 7.75 505 16

14x8 8-1/8 3 5 3-1/2 8 5/16 14 8.25 543 16

15x8 8-1/8 3-1/4 5 3-1/2 8 5/16 14 8.50 582 8

16x8 8-1/8 2-7/8 6 3-1/2 8 5/16 14 9.00 621 8

17x8 8-1/8 3 6 3-1/2 8 5/16 14 9.50 660 8

18x8 8-1/8 3-1/8 6 3-1/2 8 5/16 14 9.75 698 8

20x8 8-1/8 3-1/2 6 3-1/2 8 5/16 14 10.75 776 8

22x8 8-1/8 4 6 3-1/2 8 5/16 14 11.50 854 8

24x8 8-1/8 3-1/2 7 3-1/2 8 5/16 14 12.00 931 8

Center or lip braces standardon 16 widths and up.Available in heavier gauges.


13/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-13-HANGER BEARINGS

C

B

A

D

E

C

B

A

E

D

1-1/2

2

2-7/16

3

3-7/16

2-3/16

2-3/4

3-1/4

4

4-3/4

2-1/2

3-1/8

3-11/16

4-3/8

5

1-7/8

1-15/16

2-15/16

2-15/16

3-15/16

1-9/16

1-9/16

2-3/8

2-5/16

3-1/16

BoreSize

A

BoreSize

A B C D E

B D EC

3

3-7/16

3-7/8

4-7/16

4-13/16

5-3/8

2-7/8

3-13/16

13/16

7/8

MATERIAL

GRADE

METHOD OFMANUFACTURE

TEMPERATUREOPERATING RANGE

LUBRICANT

COLOR

WEARITE *

Engineered nylon resin

Industrial grade

Injection molded

-60F to +300F

Built-in lubricant*

Black

PLASTECH

Engineered nylon resin

Food grade, FDA

Injection molded

-60F to +300F

Built-in lubricant

Tan

UHMW

Polyethylene

Food grade, FDA

Machined or molded

-120F to +160F

Natural

White

WOOD

Maple

Industrial grade

Machined

-50F to +160F

Oil impregnated

Brown

DURA-BUKETHANGERBEARINGS

Other sizes available on request.

STYLE A BEARING

Two-piece double flange bearing for screw conveyorhanger with form strap. Hanger Styles 20A, 20B, 26B

28A, 30, 50, 220, 226 228 and 326.

STYLE B BEARING

Cap type half bearing for screw conveyor hangewith U-bolt construction. Hanger Styles 17, 18, 18A

18B, 19B and 40.

STYLE C BEARING

Two piece bearing with rectangular upper half and doubflange lower half for Hanger Styles 16, 16B, 16C, 24, 24

24B, 28, 216, 216B, 216C, 216F, 230 and 316.

Call for sizes and dimensions.

* Wearite bearings available drilled and tapped to lube or purge pipes.

CHOOSEFROM ONE

BELOW


14/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631

FAX: 972-735-8896

-14-

DALLAS, TEXAS

SPECIFICATIONSMaterial: Virgin Ultra High Molecular Weight (UHMW) polyethylene is white. Reprocessed UHMW polyethylene is

green. Static reduced UHMW is black. UHMW has a thickness tolerance of +/- 10%.

Style: Drag conveyor flights are fabricated to original manufacturers design. Cut edges are square unless

otherwise noted.

Custom Flights: Non-standard flights can be custom fabricated to your specifications. Send print or sample for fabrication of

flight.Temperature: -60 F to +225 F or -51 C to +107 C

Ordering: Before ordering, please note manufacturer design, number of flights, size and thickness. If custom drag

conveyor flight is required, please have sample or drawing available.

BENEFITS

Excellent abrasion resistance

Self-lubricating Slick material surface with low coefficient of friction High impact strength, absorbs shocks and

dampens sound Chemically inert USDA-FDA approved resins

(virgin only)

Easily machined

SOME LIMITATIONS Temperature range: continuous -120 F to +185 F

intermittent +210 F Frictional heat may be generated due to speed

and tensile load May be cut by sharp particles impacting UHMW High thermal coefficient of expansion May acquire static electricity

AVAILABLE IN THESE MATERIALS

Virgin -White (Food Grade)

Reprocessed - Green

Static Reduced - Black

Other custom materials are available,

including nylon, urethane, polyethylene

and teflon

THICKNESS,INCHES

WEIGHT,POUNDS

PRIME UHMW POLYETHYLENESHEETING (PER SHEET)

48 X 120

1/8

3/16

1/4

3/8

1/2

5/8

3/41

1-1/4

1-1/2

1-3/4

2

2-1/2

3

3-1/2

4

25

38

50

75

100

125

150200

250

300

350

400

500

600

700

800

UHMW SHEETING

SIZE, INCHES

(LENGTH ANDTHICKNESS)

SCREWCONVEYOR

SUPERFLO

ESSMUELLERCOMPANY

PEERLESS

THOMASCONVEYOR

FLI-CON

J EFFREY

MULTI-FLOW

EHRSAM

DRACON

ENMASSE

6 x 1/4

6 x 3/8

9 x 1/4

9 x 3/8

9 x 1/2

10 x 3/8

10 x 1/2

12 x 3/8

12 x 1/2

14 x 3/8

14 x 1/2

16 x 3/8

16 x 1/2

18 x 3/8

18 x 1/2

20 x 1/220 x 5/8

24 x 1/2

24 x 5/8

DRAGCONVEYOR

FLIGHTS

DRAG CONVEYOR FLIGHTS AND UHMW SHEETING


15/16

16400 Midway Rd. (75244)P.O. Box 700008



LOCAL: 972-735-8631


-15-MAXI-SPLICE BELT FASTENING DEVICE

DESCRIPTION

The Maxi-Splice is a mechanical clamping device with a simple three-piece construction. The patented design is for use on PVC and rubberbelting.

It accommodates belts of all thicknesses.

Standard splice bolts will accommodate up to 1/2 thick belting. Longerbolts are available for thicker belts.. Each splice set accommodates two inches of belt width. It is tested and approved by leading manufacturers of PVC and rubber

belting.

SPLICES

MAXI-SPLICE AB MAXI-SPLICE CI Non-ferrous metal of very high tensile strength Ferrous metal of moderately high tensile strength

Usable on belts up to 1200 PIW tensile Usable on belts of up to 600 PIW tensile Non-sparking, non-corroding and non-rusting Silver color Bronze color

INSTALLATION

1. First ensure the belt ends are square and even. If using the splicetemplate tape, apply the tape to mark the punching. Be sure to applythe tape squarely on the belt ends; then proceed to Step 4. If you are

not using the tape, go to Step 2.2. Draw a line approximately 4-1/4 from the belt end to use as the center

line for hole punching. Proper installation for even width belts willbegin just inside the belt edge. Odd belt widths require installation 1/2from the belt edge.

3. Use the Maxi-Splice as a template to mark the hole locations forpunching. After marking the first hole, move over 2 and mark eachconsecutive hole.

4. Punch both belt ends for 1/2 diameter bolts.5. The two end plates and center plate are used for firm belt gripping.

The end plates have two gripping areas the slotted gripping area ismounted toward the face of the belt and is followed by a series ofgripping teeth. These teeth are always mounted toward the tail of thebelt. The center plate is symmetrical and cannot be improperly

installed.6. IMPORTANT: We have supplied a 1/2 diameter, 4 long Grade 5 bolt

and nylon locking nut. The bolts must be torqued for Maxi-Splice toeffectively clamp. The torque requirement is 75 foot pounds for beltsup to and including 600 PIW belts greater than 600 PIW tensile require100 foot pounds of torque.

7. Run the belt for thirty minutes; stop the leg and re-torque the bolts.

*Patent No. 4,540,389

PVCor

Rubber Belt

End P iece #1

End P iece #2

1/2" Diameter4" Long

Grade 5 BoltAnd Self-Locking

Nut

Center PieceCenter Piece


16/16

DURA-BUKET FAMILY OF PRODUCTS

Dura-Buket Offers TheLargest Selection Of

Elevator Buckets!

Hanger Bearings Standard Duty Plastic Buckets Elevator Bolts

Elevator Belting and Chain Drag Conveyor Flights Standard Duty Metal Buckets

Mailing: Shipping:P.O. Box 700008 16400 Midway Road

Dallas, TX 75370-0008 USA Dallas, TX 75244 USA

North America : 1-800-851-9116Local: 972-735-8631FAX: 972-735-8896

catalogo de cangilones

Documents