catalogo n-m58-cn 2016 pagg doppie 03-2016elco-spa.com/catalogs/[email protected]...
TRANSCRIPT
N - M58 - CNShaded Pole Motors
A Regal Brand
Catalog Shaded Pole Motors 03.2016 - Printed in Italy
ELCO-E-TRADE SRLVia Marconi, 120065 INZAGO Milano - ItaliaPhone +39 02 95319.1Fax +39 02 [email protected]
www.elco-spa.com
REGAL DE MEXICO S. DE R.L. DE C.V. Jose Timoteo Rosales # 4616Col. Niño ArtilleroMONTERREY, Nuevo Leon, México 64280Phone + 52 (81) 5000 7900 [email protected]
www.regalbeloit.com
ELCO DO BRASIL LTDAAvenida Armando De Andrade, 54906754-210 - TABOÃO DA SERRA - SP-BrasilPhone (005511) 47019337 / 47019650 / 47878029Fax (005511) [email protected]
www.regalbeloit.com
ELCO MOTORS ASIA PTE LTD22 Kallang Avenue #07-06Hong Aik Industrial Building - SINGAPORE 339413Phone +65 6298 9169Fax +65 6291 [email protected]@singnet.com.sg
www.regalbeloit.com
ELCO CHINA LIMITEDXincheng Industrial Zone, Hengli Guangdong Province, PRCPhone +86 769 82203112Fax +86 769 [email protected]
www.regalbeloit.com
ELCO MOTORS LTDOffice 502 Building 38/4, letter A, Nevsky prospectST PETERSBURG, Russia, 191011Phone + 7 (812) [email protected]
www.regalbeloit.com
REGAL BELOIT DE COLOMBIA Calle 140 N 10a - 48 Oficina 204BOGOTÀ, ColombiaPhone +57 (1) 744-8491 / +57 (1) [email protected]
www.regalbeloit.com
A Regal Brand
www.regalbeloit.com
I motori Shaded Pole dellaSerie Nsono diffusamente impiegatinella refrigerazione industriale,commerciale, gruppi condensanti, evaporanti e ventilazione di piccola portata. Sono motori monofase a 4 poli schermati funzionantialla tensione nominale di 230 V, 50-60 Hz e con potenze da 5 a 34 Watt; classe di isolamento B, grado di protezione IP40.
The shaded pole motors of theN seriesare widely used in the industrial and commercialrefrigeration, in the condensing and evaporating units and in small ventilating units. These motors are 4 shaded poles, single phase, running at a nominal tension of 230 V, 50-60 Hz, with an output power rangingfrom 5 to 34 Watt; insulation class B and protection class IP40.
MOTORI SERIE
N NSERIES MOTORS
3
MOTORI SERIE NMotori N - Caratteristiche generaliMotori N - FissaggiMotori N - T1Motori N - T2Motori N - T3Motori N - T4Motori N - T5Motori N - Plug-in T1Motori N - Plug-in T2Motori N - Plug-in T3Motori N - Plug-in T4Motori N - MixerMotori N - Componenti baseMotori N - Etichetta di identificazione
VENTOLEVentole - DescrizioneVentole - Limiti di accoppiamentoVentole plastica - CurveVentole alluminio - Curve Ventole plastica - AspirantiVentole plastica - PrementiVentole alluminio - AspirantiVentole alluminio - Prementi
ACCESSORIAccessori - DescrizioneAnelliGriglieStaffeCavi - Tripolare con connettore
MOTORI SERIE M58Motori M58 - DescrizioneMotori M58Ventilatori MA58
VENTOLEVentole alluminio per MA58Ventole plastica per MA58
MOTORI SERIE CNMotori CN - DescrizioneMotori CN
N SERIES MOTORSN Motors - General featuresN Motors - FixingN Motors - T1N Motors - T2N Motors - T3N Motors - T4N Motors - T5N Motors - Plug-in T1N Motors - Plug-in T2N Motors - Plug-in T3N Motors - Plug-in T4N Motors - MixerN Motors - Main componentsN Motors - Identification label
FAN BLADESFan blades - General featuresFan blades - Coupling limitsPlastic fan blades - PerformanceAluminium fan blades - PerformancePlastic fan blades - SuckingPlastic fan blades - BlowingAluminium fan blades - SuckingAluminium fan blades - Blowing
ACCESSORIESAccessories - General featuresRingsGridsBracketsCables - 3-Core cable with plug
M58 SERIES MOTORSM58 Motors - General featuresM58 MotorsMA58 Fans
FAN BLADESAluminium fan blades for MA58 Plastic fan blades for MA58
CN SERIES MOTORSCN Motors - General featuresCN Motors
INDICE INDEX
pag. 3-4-5pag. 6pag. 7pag. 8pag. 9pag. 10pag. 11pag. 12pag. 13pag. 14pag. 15pag. 16pag. 17pag. 18
pag. 19pag. 20pag. 21pag. 22pag. 23pag. 24pag. 25pag. 26
pag. 27pag. 28pag. 29pag. 30pag. 31
pag. 32pag. 33pag. 34
pag. 35pag. 36
pag. 37pag. 38
2
Insulation class B
Protection gradeIP40, upon request IP44.
Locked rotor protectionimpedance or thermal protector.
Shaft supportself-lubricating and self-aligning sleeve bearings;ball bearings on request.
Axial fan bladesThe 5-bladed aluminium rangeshape and inclinations havebeen studied to optimise theairflow. The range of diametersavailable is from 154 mm up to300 mm, with pitches varyingfrom 19° to 34°; this is validboth for the sucking and theblowing version. The fan blades range hasbeen increased by designinga new thermoplastic serieswhose main target is thereduction of the noise level.These plastic fan blades areavailable in the most populardiameters and pitches.
AccessoriesA wide range of accessories is available: rings, grids,brackets and cables completeof connectors.
PackagingMotors are packed in carton boxes, piled into pallets and shrink-wrapped.
CertificationsAll the products are developed,designed and manufactured incompliance with the low tensiondirective 2006/95/EC, with theEMC directive 93/68/EC, withthe machinery directive2006/42/EC and in accordancewith the EN 60335-1 CENELECstandards.The motors illustrated here areVDE, UL, CSA, GOST, CCC,recognised and are suppliedwith the attached marksimpressed.
Classe di isolamento B
Grado di protezioneIP40, su richiesta IP44.
Protezione a rotore bloccatoper impedenza o con protettore termico.
Supporto per albero motorecon bronzine autolubrificanti e autoallineanti a richiesta con cuscinetti a sfera.
Ventole assialiLe ventole assiali a 5 pale in alluminio sono state studiatecon forma e inclinazione talida fornire un buon rendimentoaeraulico. Sono disponibili neidiametri da 154 a 300 mm con inclinazioni comprese tra19° e 34° sia nella versioneaspirante che premente.La gamma delle ventole èstata ampliata con una serie in materiale termoplastico, il cui obiettivo peculiare è diridurre la rumorosità. Questeventole sono disponibili neidiametri e nelle inclinazioni piùcomunemente utilizzate.
AccessoriA integrazione dei motori serie N è disponibile una vastagamma di accessori chevanno dagli anelli, alle griglie,ai supporti, per finire con i cavicon connettore.
ImballoI motori sono imballati in scatole di cartone, impilati inpallet e protetti da una pellicola di termoretraibile.
OmologazioniTutti i prodotti sono sviluppati,progettati e costruiti in conformità alla Direttiva BassaTensione 2006/95/EC, allaDirettiva EMC 93/68/EC, allaDirettiva macchine 2006/42/ECe seguendo la normativa standard CENELECEN60335-1.I motori qui presentati sonoapprovati VDE, UL, CSA,GOST, CCC, e sono provvistidei marchi a fianco riportati.
MOTORI SERIE
N NSERIES MOTORS
5
Caratteristiche generaliLa nuova gamma dei motoriserie N a poli schermati nascedall'esperienza maturata in piùdi mezzo secolo di attività daELCO, leader mondiale perknow how, ricerca e sviluppo,unica in grado di offrire motoricoperti da garanzia di 3 anni.Tutti i prodotti sono estremamente innovativi, perla volontà di ELCO di soddisfare ogni richiesta nel modo più appropriato esfruttando tecnologie in continua evoluzione.
MaterialiTutti i prodotti sono realizzaticon componenti rigorosamente selezionati tra i migliori fornitori e ogni componente è sottoposto astretti controlli come previstodalle Normative Europee.I coperchi sono realizzati in lega di alluminio.Inoltre ELCO ha sviluppatouna gamma di ventole utilizzando materie plasticheche ne riducono la deformazione, aumentano lastabilità dimensionale garantendone nel tempo laforma e la corretta bilanciatura.
Posizione di montaggioEspressamente studiati peressere montati sia in orizzontale che verticale.
Senso di rotazioneAntiorario lato albero.
PrestazioniLa versione standard funzionaa 230 V, 50-60 Hz, ma sono disponibili diversetensioni e frequenze di alimentazione.
Funzionamento continuocon temperatura ambiente-40°C +40°C grazie ad uno speciale lubrificante, che migliora le caratteristiche del motore ultima generazione.
General featuresThe new range of shaded polemotors is the result of morethan 50 years experience ofELCO as world leader not onlyfor the sales volumes, but also for know how,research and development.ELCO is today the only manufacturer offering a 3years warranty on its shadedpole motors. All products arestrongly innovative as ELCOwants to answer the request of the market asking for new technologies.
MaterialsAll products are realised with components that are strictlyselected among the best possible suppliers and every component is severely testedas requested by European standards. End-shields are in aluminium.ELCO has also developed a fan blades range in thermoplastic material. This material reduces thedeformation of the blade andimproves the dimensional stability, granting at the sametime its shape and the correctbalancing.
MountingThe motors are suitable for horizontal and verticalmounting.
Direction of rotationCCW viewed from shaft side.
PerformancesStandard version runs at 230 V, 50-60 Hz; other solutions are availableon request.
Ambient temperature-40°C +40°C; we use a special lubricant whose characteristics are better than those of the previous lubricants.
MOTORI SERIE
N NSERIES MOTORS
4
MOTORI N
T1Due differenti tipi di fissaggio possibili:
• 3 fori filettati M4 a 120° su Ø 72 mm sul coperchio posteriore
• viti sporgenti M4 lato uscita albero per anello/rete.
Two different types of fixation:
• 3 x M4 tapped holes on 72 mm PCD at 120°
• M4 protruding screws Drive End for ring/grid.
N MOTORS
T1
Dimensioni - Dimensions
Prestazioni - Performances
NET1T05ZVN001NET1T10ZVN002NET1T16PVN001NET1T25PVN001NET1T34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
500500500500500
NET1T05ZVN001NET1T10ZVN002NET1T16PVN001NET1T25PVN001NET1T34PVN001
CodicePart Number
H A B C E F
1320254045
808792107119
2122212128
-----
D
-----
-----
3838383745
7
MOTORI NFISSAGGI
I motori della serie N sono stati sviluppati per essere fissati attraverso diverse soluzioniriassunte in questa tabella: utilizzando le viti sporgenti peril montaggio con anello o rete,i fori filettati sul coperchio posteriore o ancora i piediniper montaggio con supporto26 mm o 18 mm.Ogni versione sarà illustratanel dettaglio nelle pagine successive.
The motors of the N series have been designed to befixed through different solutions that are shown in the following table: motors can be fixed by usingthe protruding screws for ring or grid,by the 3 threaded holes on back shield, or using the bottom screws for bracket mounting.
N MOTORS FIXING
Coperchi in alluminio - Aluminium end-shields
4xM4 viti anteriori x 10/124xM4 x 10/12 screws Drive End
3xM4 fori posteriori interasse Ø 723xM4 holes on 72 PCD non Drive End
3xM4 fori anteriori interasse Ø 723xM4 holes on 72 PCD Drive End
Piede 26 mm2xM4 screws stud mounting, 26 mm spaced
Piede 18 mm2xM4 screws stud mounting, 18 mm spaced
Connessione Plug-inPlug-in connection
••
T1Pag. 12
•
T1Pag. 7
T2Pag. 8
T3Pag. 9
T4Pag. 10
T5Pag. 11
•
T2Pag. 13
•
•
•
T3Pag. 14
•
•••••A RICHIESTA
ON DEMAND
••
•
T4Pag. 15
•
A RICHIESTAON DEMAND
6
MOTORI N
T3N MOTORS
T3
Dimensioni - Dimensions
Prestazioni - Performances
NET3T05ZVN004NET3T10ZVN001NET3T16PVN001 NET3T25PVN004 NET3T34PVN002
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
500500500500
1000
NET3T05ZVN004NET3T10ZVN001NET3T16PVN001 NET3T25PVN004 NET3T34PVN002
CodicePart Number
H A B C E F
1320254045
768387102119
1718161628
4445434356
D
-----
---
3136
3434333245
9
Due differenti tipi di fissaggio possibili:
• viti sporgenti M4 lato uscita albero per anello/rete
• 2 viti M4 in basso per fissaggio con staffa.
Two different types of fixation:
• M4 protruding screws Drive End for ring/grid
• 2 x M4 bottom screws for stud mounting.
MOTORI N
T2N MOTORS
T2
Dimensioni - Dimensions
Prestazioni - Performances
NET2T05ZVN001NET2T10ZVN002NET2T16PVN001 NET2T25PVN001 NET2T34PVN002
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
500500500500500
NET2T05ZVN001NET2T10ZVN002NET2T16PVN001 NET2T25PVN001 NET2T34PVN002
CodicePart Number
H A B C E F
1320254045
768387
107119
1718162128
-----
D
-----
-----
3434333740
8
Un tipo di fissaggio possibile:• viti sporgenti M4 lato uscita
albero per anello/rete.
One type of fixation:• M4 protruding screws
Drive End for ring/grid.
MOTORI N
T5N MOTORS
T5
Dimensioni - Dimensions
Prestazioni - Performances
NET5T05ZVN001NET5T10ZVN001NET5T16PVN001 NET5T25PVN001 NET5T34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
15 Pcs15 Pcs15 Pcs10 Pcs10 Pcs
500500500500500
NET5T05ZVN001NET5T10ZVN001NET5T16PVN001 NET5T25PVN001 NET5T34PVN001
CodicePart Number
H A B C E F
1320254045
808792112119
2122212628
4849485356
D
5259648492
-----
3838384245
11
Motore universale con cinque differenti tipi di fissaggio possibili:
• 3 fori filettati M4 a 120° su Ø 72 mmsul coperchio posteriore
• 3 fori filettati M4 a 120° su Ø 72 mmsul coperchio anteriore
• viti sporgenti M4 lato uscita albero per anello/rete
• 2 viti M4 in basso per fissaggio con staffa, interasse 26 mm
• 2 viti M4 in alto per fissaggio con staffa, interasse 18 mm.
Universal motor with five different types of fixation:
• 3 x M4 tapped holes on 72 mm PCD at 120°, non Drive End
• 3 x M4 tapped holes on 72 mm PCD at 120°, Drive End
• M4 protruding screws Drive End for ring/grid
• 2 x M4 bottom screws for stud mounting, 26 mm spaced
• 2 x M4 top screws for stud mounting, 18 mm spaced.
MOTORI N
T4N MOTORS
T4
Dimensioni - Dimensions
Prestazioni - Performances
NET4T05ZVN001NET4T10ZVN001NET4T16PVN001 NET4T25PVN001 NET4T34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
500500500500500
NET4T05ZVN001NET4T10ZVN001NET4T16PVN001 NET4T25PVN001 NET4T34PVN001
CodicePart Number
H A B C E F
1320254045
808792
112119
2122212628
4849485356
D
-----
---
3136
3838384245
10
Tre differenti tipi di fissaggio possibili:
• 3 fori filettati M4 a 120° su Ø 72 mm sul coperchio posteriore
• viti sporgenti M4 lato uscita albero per anello/rete
• 2 viti M4 in basso per fissaggio con staffa.
Three different types of fixation:
• 3 x M4 tapped holes on 72 mm PCD at 120°
• M4 protruding screws Drive End for ring/grid
• 2 x M4 bottom screws for stud mounting.
MOTORI N
T2PLUG-IN
N MOTORS
T2PLUG-IN
13
Motore con connettore speciale(Brevetto Elco Nr. 0765024) per collegamento mobile a cavo di alimentazione. Un tipo di fissaggio possibile:
• viti sporgenti M4 lato uscita albero per anello/rete.
Motor with special flat pin terminal(Elco Patent No. 0765024) for connection to the supply cable.One type of fixation:
• M4 protruding screws Drive End for ring/grid.
Dimensioni - Dimensions
Prestazioni - Performances
NET2C05ZVN001NET2C10ZVN001NET2C16PVN001NET2C25PVN001NET2C34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
-----
NET2C05ZVN001NET2C10ZVN001NET2C16PVN001NET2C25PVN001NET2C34PVN001
CodicePart Number
H A B C E F
1320254045
768387107114
1718162123
-----
D
-----
-----
3434333740
MOTORI N
T1PLUG-IN
N MOTORS
T1PLUG-IN
12
Motore con connettore speciale (Brevetto Elco Nr. 0765024)per collegamento mobile a cavo di alimentazione. Due differenti tipi di fissaggio possibili:
• 3 fori filettati M4 a 120° su Ø 72 mm sul coperchio posteriore
• viti sporgenti M4 lato uscita alberoper anello/rete.
Motor with special flat pin terminal(Elco Patent No. 0765024) for connection to the supply cable.Two different types of fixation:
• 3 x M4 tapped holes on 72 mm PCD at 120°
• M4 protruding screws Drive End for ring/grid.
Dimensioni - Dimensions
Prestazioni - Performances
NET1C05ZVN001NET1C10ZVN001NET1C16PVN001NET1C25PVN001NET1C34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
-----
NET1C05ZVN001NET1C10ZVN001NET1C16PVN001NET1C25PVN001NET1C34PVN001
CodicePart Number
H A B C E F
1320254045
808792107119
2122212128
-----
D
-----
-----
3838383745
MOTORI N
T4PLUG-IN
N MOTORS
T4PLUG-IN
15
Motore con connettore speciale(Brevetto Elco Nr. 0765024) per collegamento mobile a cavo di alimentazione. Tre differenti tipi di fissaggio possibili:
• 3 fori filettati M4 a 120° su Ø 72 mmsul coperchio posteriore
• viti sporgenti M4 lato uscita albero per anello/rete
• 2 viti M4 in basso per fissaggio con staffa.
Motor with special flat pin terminal(Elco Patent No. 0765024) for connection to the supply cable.Three different types of fixation:
• 3 x M4 tapped holes on 72 mm PCD at 120°
• M4 protruding screws Drive End for ring/grid
• 2 x M4 bottom screws for stud mounting.
Dimensioni - Dimensions
Prestazioni - Performances
NET4C05ZVN001NET4C10ZVN001NET4C16PVN001NET4C25PVN001NET4C34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
-----
NET4C05ZVN001NET4C10ZVN001NET4C16PVN001NET4C25PVN001NET4C34PVN001
CodicePart Number
H A B C E F
1320254045
808792112119
2122212628
4849485356
D
-----
---
3136
3838384245
MOTORI N
T3PLUG-IN
N MOTORS
T3PLUG-IN
14
Motore con connettore speciale (Brevetto Elco Nr. 0765024)per collegamento mobile a cavo di alimentazione. Due differenti tipi di fissaggio possibili:
• viti sporgenti M4 lato uscita albero per anello/rete
• 2 viti M4 in basso per fissaggio con staffa.
Motor with special flat pin terminal(Elco Patent No. 0765024) for connection to the supply cable.Two different types of fixation:
• M4 protruding screws Drive End for ring/grid
• 2 x M4 bottom screws for stud mounting.
Dimensioni - Dimensions
Prestazioni - Performances
NET3C05ZVN001NET3C10ZVN001NET3C16PVN001NET3C25PVN002NET3C34PVN001
CodicePart Number
Volt W Out W In Amp RPM ImballoPacking
Cavo-Cablemm
230230230230230
510162534
32386595
120
0,200,230,450,680,87
1300/15501300/15501300/15501300/15501300/1550
20 Pcs20 Pcs15 Pcs10 Pcs10 Pcs
-----
NET3C05ZVN001NET3C10ZVN001NET3C16PVN001NET3C25PVN002NET3C34PVN001
CodicePart Number
H A B C E F
1320254045
768387102119
1718161628
4445434356
D
-----
---
3136
3434333245
MOTORI NCOMPONENTIBASE
Gruppo indottoGruppo statoreCoperchio anterioreCoperchio posterioreBronzinaContenitoreCoperchiettoPassacavoViteDadoPortaventola
123456789
1011
N MOTORSMAIN COMPONENTS
17
Rotor shaft assemblyStatorDrive end-shieldNon drive end-shieldSleeve bearingWasherCoverCable glandScrewNutBlade holder
123456789
1011
MOTORI NMIXER
N MOTORS MIXER
Prestazioni e Dimensioni - Performances and Dimensions
NET7B08NNN501NET7B08NNN801NET7T07PNN201NET7B28NNN501NET7B28NNN502NET7B20NNN801NET7B20NNN802NET7B20NNN803
CodicePart Number
Volt-Hz
127-60220-60
230-50/60127-60127-60220-60220-60220-60
WOut
887
2828202020
W In
4339309898909090
H
2020304545454545
A
275275334413363363413453
B
188188251300250250300340
C
2222-
2222222222
Ø X
9,529,527,009,529,529,529,529,52
Cavo-Cablemm
S 2040S 2040R 1030S 2015S 2015S 2015S 2015S 2015
16
Motori speciali con doppia sporgenza albero per collegamento ventolina agitatrice liquido e ventola di raffreddamento motore (non comprese nella fornitura).
Special double shaft motors for the coupling of the mixer fan and of the cooling fan (not included).
VENTOLE FAN BLADES
19
La gamma di ventole assiali a 5 pale comprende le versioni in alluminio (aspiranti e prementi) nei Ø 154, 172, 200, 230, 254,275, 300 con inclinazioni comprese tra 19° e 34°, e in materiale termoplastico nei Ø 154, 172, 200, 230, 254 e con inclinazioni definite.
The range of 5 bladed axial fans includes aluminiummodels, sucking and blowing, in the following diameters Ø 154, 172, 200, 230, 254, 275, 300, pitches available from 19° up to 34° and thermoplastic models, Ø 154, 172, 200, 230, 254 and specific pitches are available.
18
Etichetta identificativaprodotto originale
Original productidentification label
Sigla motore
Motor description
Dati elettrici
Rated data
Codice cliente (facoltativo)
Customer part number (optional)
Codice prodotto
Product part number
Settimana - anno di produzione
Week - year of production
Omologazioni
Certifications
ETICHETTA LABEL
CURVE DI PORTATAMOTORE CON VENTOLA IN PLASTICA
AIR FLOW PERFORMANCEMOTOR WITH PLASTIC FAN BLADE
VN 5-13 + Ø 154x28°VN 5-13 + Ø 172x31°VN 5-13 + Ø 200x28°VN 10-20 + Ø 200x28°VN 10-20 + Ø 200x34°VN 10-20 + Ø 230x31°
VNT 16-25 + Ø 230x31°VNT 16-25 + Ø 254x22°VNT 25-40 + Ø 254x22°VNT 16-25 + Ø 254x28°VNT 25-40 + Ø 254x28°
1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 =9 =
10 =11 =
21
Le curve sotto riportate indicano le prestazioni aerauliche per i più comuni accoppiamenti motore/ventola in plastica.
The under-drawn curves show the airflow performances for the most common motor/plastic blade couplings.
VENTOLE FAN BLADES
Ventole in alluminio - Limite di accoppiamento motore/ventolaAluminium fan blades - Motor/fan coupling limits
Ø VentolaFan blade
1541722002302543002834
3431
3431
342822
343425
34342822
34343428
34343422
34343425
50
VN 5-13MotoreMotor
VN 10-20 VNT 16-25 VNT 25-40 VNT 34-45
60 50 60 50 60 50 60 50 60Freq. Hz
α (°) max
Ventole in plastica - Limite di accoppiamento motore/ventolaPlastic fan blades - Motor/fan coupling limits
Ø VentolaFan blade
1541722002302542828
3128
3128
3431
3431
283134
283134
50
VN 5-13MotoreMotor
VN 10-20 VNT 16-25 VNT 25-40 VNT 34-45
60 50 60 50 60 50 60 50 60Freq. Hz
α (°) max
20
In questa tabella sono indicati i limiti per l'accoppiamento ottimale fra motori e ventole.
N.B.:Per ogni diametro di ventola è indicata l’inclinazione massima sopportabile dal motore, per non superare i limiti di temperatura impostidalla classe di isolamento “B” ad un valore di prevalenza di 2 mmH2O.
In this table you have the limits for the motor / fan blade couplings.
P.D.:For each fan blade diameter the maximum motor inclination is indicated, not to exceed the temperature limits imposed by "B" insulation class to a 2 mmH2O value.
VENTOLEPLASTICAASPIRANTI
PLASTICFAN BLADESSUCKING
23
Tavola di identificazione delle ventole in plastica. Campo di impiego -30°C +60°C.
Selection table for plastic fan blades. Temperature range -30°C +60°C.
154
4VEA0123419226
Part NumberBC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
Packing
22°
25°
28°
31°
34°
172
4VEA0114024
220
200
4VEA0094427
180
4VEA0105129
170
230
4VEA0134623180
4VEA01849
23,5160
4VEA0065228170
2544VEA008
4725170
4VEA0075632140
Ø A
CURVE DI PORTATAMOTORE CON VENTOLA IN ALLUMINIO
AIR FLOW PERFORMANCEMOTOR WITH ALUMINIUM FAN BLADE
VN 5-13 + Ø 154x34°VN 5-13 + Ø 172x34°VN 5-13 + Ø 200x28°VN 10-20 + Ø 200x28°VN 10-20 + Ø 230x28°
VNT 16-25 + Ø 230x34°VNT 16-25 + Ø 254x28°VNT 25-40 + Ø 254x28°VNT 25-40 + Ø 300x22°VNT 34-45 + Ø 300x28°VNT 34-45 + Ø 300x34°
1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 =9 =
10 =11 =
22
Le curve sotto riportate indicano le prestazioni aerauliche per i più comuni accoppiamenti motore/ventola in alluminio.
The under-drawn curves show the airflow performance for the most common motor/aluminium blade couplings.
VENTOLEALLUMINIOASPIRANTI
ALUMINIUMFAN BLADESSUCKING
1544012309
241350
4012002271550
4012256311750
4012003341750
4012004371850
4012310402150
Part NumberBC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
Packing
19°
22°
25°
28°
31°
34°
1724012298
251550
4012005281550
4012257311650
4012006351750
4012299391850
4012300422150
2004012200
261550
4012009301550
4012220331650
4012010371850
4012011412050
4012201442350
2304012148
281650
4012013332050
4012149372250
4012038412450
4012014462640
4012150502940
2544012259
291645
4012015342045
4012255382250
4012132422450
4012016462740
4012261513040
3004012258
352330
4012018412530
4012262452820
4012019542920
4012020553120
4012263633320
Ø A
Tavola di identificazione delle ventole in alluminio versione aspirante.
Selection table for aluminium fan blades sucking version.
25
VENTOLEPLASTICAPREMENTI
PLASTICFAN BLADESBLOWING
Tavola di identificazione delle ventole in plastica. Campo di impiego -30°C +60°C.
Selection table for plastic fan blades. Temperature range -30°C +60°C.
1544VEP001
2614
260
Part NumberBC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
Packing
19°
22°
25°
28°
31°
172 200
4VEP00347,528
175
230 2544VEP007
3925
160
4VEP0064621
130
Ø A
24
ACCESSORIANELLI, GRIGLIE,STAFFE, CAVI
ACCESSORIESRINGS, GRIDS,BRACKETS, CABLES
Le tipologie di accessori descritti nelle pagine successive sono quelle standard. Su richiesta, possono essere prodotti componenti specifici secondo disegno del cliente.
The accessories illustrated in the following pages are the standard ones. Special components can bemanufactured on request.
27
VENTOLEALLUMINIOPREMENTI
ALUMINIUMFAN BLADESBLOWING
Tavola di identificazione delle ventole in alluminio versione premente.
Selection table for aluminium fan blades blowing version.
1544012530
241350
4012531271550
4012532311550
4012533341750
4012534371840
4012535402140
Part NumberBC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
PackingPart Number
BC
Packing
19°
22°
25°
28°
31°
34°
1724012540
251550
4012541281550
4012542311650
4012543351750
4012544391840
4012545422140
2004012510
261550
4012511301550
4012512331650
4012513371850
4012514412040
4012515442340
2304012344
281640
4012321342040
4012345392225
4012324432425
4012346472620
4012329522920
2544012342
291640
4012322352030
4012347402225
4012325442425
4012323482720
4012328533020
30050121001
372230
50121002402320
50121009492920
50121003573420
50121005653515
Ø A
26
GRIGLIE GRIDS
ABCH
Codice - Part Number
Ø Ventola - Fan Blade 2002322142.524
1055223
2302642404.027
1055594
2542882644.024
1055224
Griglie in materiale termoplastico
Thermoplastic grids
ABCH
Codice - Part Number
Ø Ventola - Fan Blade 15417020219011
1055299
17218822020811
1055300
20021424823625
1055317
23024627826627
1055318
25427030029017
1055303
30032435434417
1055304
Griglie in acciaio galvanizzato
Galvanized steel grids
29
ANELLI RINGS
ABCDE
Codice - Part Number
Ø Ventola - Fan Blade 1542005648190162
1072943
1722205648
208180
1072944
2002485648
236208
1072946
23028060
51.5266238
1072891
25430260
51.5290264
1072892
Anelli in materiale termoplastico
Thermoplastic rings
ABCDE
Codice - Part Number
Ø Ventola - Fan Blade 1542001624925190
3255003
1722201804926
2083255002
2002482084926
2363255004
2302782384926266
3255009
2543022624926
2903255006
3003503084926
3443255008
Anelli in acciaio verniciato
Steel ringspainted
ABCDE
Codice - Part Number
Ø Ventola - Fan Blade 1542001623625190
3255010
1722201803626
2083255011
2002482083626
2363255012
2302782383626266
3255013
2543022623626
2903255014
3003563083630
3443255078
Anelli in acciaio verniciato
Steel ringspainted
ASPIRANTI SUCKING
ASPIRANTI SUCKING
PREMENTI BLOWING
28
CAVITRIPOLARE CONCONNETTORE
CABLES3-CORE CABLEWITH PLUG
Lunghezza - Lengthmm500100015002000250030003500400045005000
Sezione - Sectionmm2
0,750,750,750,750,750,751,001,001,001,00
IP42Codice -Part Number
3-334-116/IMB3-334-117/IMB3-334-118/IMB3-334-120/IMB3-334-121/IMB3-334-122/IMB3-209-033/IMB3-209-034/IMB3-209-035/IMB3-209-036/IMB
IP44Codice -Part Number
3-334-007/IMB3-334-008/IMB3-334-009/IMB3-334-010/IMB3-334-011/IMB3-334-012/IMB3-209-017/IMB3-209-018/IMB3-209-019/IMB3-209-020/IMB
31
STAFFE BRACKETS
Staffe a V
V-form brackets
10381011038103103811010381131038007103804910380031038002
CodicePart Number
H X Y C L
395272847384
109109
8181818178787878
106106106106100100100100
3,03,03,03,0
21,021,021,034,5
2424242439393949
Staffe dritte
Straight brackets
10381521038162103815710380611038009
CodicePart Number
H X Y C L
52728490
112
130159142110150
152181164132172
3,03,03,0
34,521,0
2424244939
30
MOTORI
M58 M58MOTORS
4-032-0014-032-0074-032-0084-032-009
CodicePart Numb.
DescrizioneDescription
M58 1-12M58 1-20
M58 1,5-30M58 1-30
Volt
230230230127
Hz
50/60505060
W out
1,01,01,51,0
W in
10151822
Amp
0,070,100,120,27
rpm
2500130016001800
Veloc.Speed
1111
A
63,573,573,573,5
B
84,791,791,791,7
C
21181818
I motori della serie M58 sono monofase a 2 poli schermati con corpoin materiale termoplastico, grado di protezione IP42,classe di isolamento B, funzionanti alla tensione nominale di 230 V, 50-60 Hz,potenza di 1-2 Watt.Supporti con bronzine autolubrificanti e autoallineanti,albero Ø 4 mm, rotazione antioraria vista latoalbero, protezione a rotorebloccato per impedenza, conformi alle norme CENELEC EN 60335-1.Posizioni di fissaggio verticalee orizzontale, limiti di temperatura –30°C +40°C.
The M58 series motors are shaded pole motors,2 poles, with plastic body, protection class IP42, insulation class B, designed for a nominal tensionof 230 V, 50-60 Hz, output power 1-2 W. Self-lubricating and self-aligning sleeve bearings,4 mm shaft diameter, CCW rotation shaft view,impedance locked rotor protection, complying with EN 60335-1 CENELEC standards. Suitable for horizontal and vertical mounting, within anambient temperature range of–30°C +40°C.
33
MOTORI
M58 M58MOTORS
I motori shaded pole della Serie M58sono specificatamente studiatiper applicazioni nel settore refrigerazione industriale, commerciale e piccole unità condensanti.
The motors of the M58 Seriesare designed for industrial refrigeration, commercial refrigeration and small condensing units.
32
MA58VENTOLEALLUMINIOQuesta serie di ventole in alluminio, disponibile sia nella versioneaspirante che premente Ø 96 mm, è stata studiata per essereimpiegata nei ventilatori M58.
This aluminium fan blades range is available with 96 mm diameter, sucking and blowing version.Specifically designed to be fitted to M58 fans.
MA58ALUMINIUMFAN BLADES
Ventola premente - Blowing Fan Blade
40121002/IMB
CodicePart Number
Ø 96 mm - 26°
DescrizioneDescription
60 Pcs
ImballoPacking
Ventola aspirante - Sucking Fan Blade
40121003/IMB
CodicePart Number
Ø 96 mm - 26°
DescrizioneDescription
60 Pcs
ImballoPacking
Ventola aspirante - Sucking Fan Blade
40121006/IMB
CodicePart Number
Ø 96 mm - 26°
DescrizioneDescription
60 Pcs
ImballoPacking
Ventola premente - Blowing Fan Blade
40121005/IMB
CodicePart Number
Ø 96 mm - 26°
DescrizioneDescription
60 Pcs
ImballoPacking
35
VENTILATORI
MA58Ventilatori costruiti interamentein materiale termoplasticoequipaggiati di motore M58,come descritto alla pagina 32e di anello. Le ventole sono fornite separatamente e illustrate alle pagine 35 e 36.
Fans entirely made of thermoplastic material, equipped with M58 motor, as described on page 32, and ring. Fan blades are supplied separately and are illustratedon pages 35 and 36.
MA58FANS
Prestazioni - Performances
4-032-0024-032-0034-032-0044-032-0054-032-006
CodicePart Number
DescrizioneDescription
Volt
MA58 1-12-100MA58 1-12-100-SMA58 1-20-154MA58 1,5-30-154MA58 1-30-154
230230230230127
Hz
50/6050/60
505060
W Out
1,01,01,01,51,0
W In
1010151822
Amp
0,070,070,100,120,27
RPM
25002500130016001800
Vel.Speed
11111
Form
ABAAA
Dimensioni - Dimensions
4-032-0024-032-0034-032-0044-032-0054-032-006
CodicePart Number
A
104104160160160
B
134134190190190
C
144144200200200
D
2121181818
E
8686869696
F
115115168168168
Form A Form B
DescrizioneDescription
MA58 1-12-100MA58 1-12-100-SMA58 1-20-154MA58 1,5-30-154MA58 1-30-154
34
MOTORI
CN CNMOTORS
I motori a poli schermati dellaSerie CNsono progettati per impiego inunità evaporanti, condensanti,vetrine e banchi frigoriferi.Sono disponibili nella versionemonofase a 2 poli, con pacco lamellare a vista,grado di protezione IP20,classe di isolamento B, funzionanti alla tensione nominale di 220 V, 50 Hz econ potenze da 1 a 8 Watt.
CN Seriesshaded pole motors are designed for use in evaporating and condensingunits, display cases and freezing cases. They are available in singlephase version, 2 poles, with stack uncovered, protection class IP20, insulation class B. These motors are designed for a nominal tension of 230 V, 50 Hz, with an output power rangingfrom 1 to 8 Watt.
37
MA58VENTOLEPLASTICAQuesta serie di ventole in plastica, disponibile sia nella versioneaspirante che premente Ø 100 e 154 mm, è stata studiata per essereimpiegata nei ventilatori M58.
This plastic fan blades range is available with 100 and 154 mm diameters, sucking and blowing version.Specifically designed to be fitted to M58 fan motors.
MA58PLASTICFAN BLADES
Ventola premente - Blowing Fan Blade
40121001/IMB
CodicePart Number
Ø100 mm - 30°
DescrizioneDescription
60 Pcs
ImballoPacking
Ventola aspirante - Sucking Fan Blade
40121004/IMB
CodicePart Number
Ø100 mm - 30°
DescrizioneDescription
60 Pcs
ImballoPacking
Ventola aspirante - Sucking Fan Blade
4VEA012/1
CodicePart Number
Ø154 mm - 28°
DescrizioneDescription
226 Pcs
ImballoPacking
Ventola premente - Blowing Fan Blade
4VEP002/IMB
CodicePart Number
Ø154 mm - 19°
DescrizioneDescription
226 Pcs
ImballoPacking
36
39
NOTE NOTES
ELCO-E-TRADE Srl reserves itself the right to modify alsowithout prior notice all indicated technical information.The user is responsible for the correct installation of com-ponents listed in the catalogue in compliance with existingregulations of each Country and the restrictions imposed.Performances in this catalogue are for reference only.IP rating granted with supplying cable facing down.
La società ELCO-E-TRADE Srl si riserva di modificare anchesenza preavviso le indicazioni tecniche contenute nel catalogo.L’utilizzatore è responsabile della corretta installazione deicomponenti descritti nel catalogo rispettando le norme in vigorein ciascun Paese e dei limiti imposti nel presente catalogo. Le prestazioni indicate sono da considerarsi indicative esoggette a tolleranze.Il grado IP è garantito per montaggio con cavo rivolto verso ilbasso.
MOTORI
CNI motori della serie CNsono disponibili sia montati su staffa che nella versione con anello e ventolain materiale termoplastico.
CN series motors are available either with bracket mounting or with thermoplastic ring and fan blade.
CNMOTORS
Form A
Motore CNcon staffa
CN Motorwith bracket
Form B
Motore CNcon anelloe ventola
CN Motorwith ring and fan blade
38