catalogo sioux
TRANSCRIPT
-
8/20/2019 Catalogo Sioux
1/13
SECTION
Valve Equipment and Accessories - Pages 2-5
Seat Grinding Equipment and Accessories - Pages 6-13
NUMERICAL INDEX OF TOOLS
644 Valve Service Cabinet 4
1630ESK Vacuum Testing Kit 10
1702 Wheel Holder 9
1710 Electric Driver 6
1712 Electric Driver 6
1716 Dressing Tool 10
1725E Valve Seat Grinding Set 7
1726E Valve Seat Grinding Set 8
1750E Valve Seat Grinding Set 7
1754A Valve Seat Grinding Set 7
1768E Valve Seat Grinding Set 8
1771A Valve Seat Grinding Set 8
1772D Dressing Tool 10
1788LX Air Driver 6
1792 Air Driver 6
2075 Valve Face Grinder 2, 3
1-800-433-1870
www.woodwardequipment.com
To place an order please call 800-433-1870 or 503-657-6680. For additional
information about Sioux Products or to purchase items online, please visit our website http://www.woodwardequipment.com/
We look forward to being of service!
http://www.woodwardequipment.com/http://www.woodwardequipment.com/
-
8/20/2019 Catalogo Sioux
2/13
VALVE RECONDITIONING EQUIPMENT
• Precision SIOUX chucking system• Variable speed chuck - 150-300 RPM• Precision linear ball bearing chuck crossslide• Fingertip chuck release• Easy angle adjustment
• Adjustable grinding head
• Micrometer feed
• Coolant tank easily removable for
cleaning
• 7" (178 mm) valve face grinding wheel
• .170" (4.3 mm) to 1/2" (12.7 mm) chuck
capacity - Model 2075SM• Valve angles from 0° - 46°
Rocker arm attachment not included-to order seeNo. 656G on page 5.
No. 2075 .230"-11/16" (6-18 mm) Chuck CapacityNo. 2075SM .170"-1/2" (4-13 mm) Chuck Capacity
Available Voltages:
115-120 Volt 60 Hz 1 Phase
MachineNo.
Chuck Cap. StemInches (mm)
Valve Head Max.Dia. Inches (mm)
Net WeightLbs. (Kg)
Base DimensionsInches (mm)
Motors
2075 .230 to 11/16 (6-18) 6 (150) 290 (132) 25-3/4 x 18 (650 x 460) Grinding Head-1/2 HP
2075SM .170 to 1/2 (4-13) 6 (150) 290 (132) 25-3/4 x 18 (650 x 460) Chuck-1/6 HP (.13 Kw)
Pump-1/70 HP (.01 Kw)
RightDressin Chuck End Grindin Vee Chuck S lashAttach. Type Attach. Wheels Block Wrench Coolant Shields Guard
Optional
RockerArm
Attach.
63283 Lever 53783 173 Standard-Left 53589 601, 250 Oil 631 B 53564 656G
177 Optional-Left 604 & for Stellite 65299
81- Right
1-800-433-1870www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
3/13
VALVE RECONDITIONING EQUIPMENT
No. 2075HPAHigh PrecisionValve Refacer
• High precision collet system up to
.0003" T.I.R. accuracy.*
• Fast load and unload air chuck.
• Push button collet release with lock
open feature for collet changing.
• Adjustable collet air pressure.
• Adjustable internal stop for quick
positioning of valves.
• Collets available in range from 3 to 17
mm (.118 to .670 inches).
• Variable speed chuck - 150-300 RPM
• Precision linear ball bearing chuck
table slide.
• Sioux No. 173 Grinding wheel for
Sioux-per finish.
• Adjustable grinding head.
• Micrometer feed.
• Valve angles from 0° to 46°.
Close-up of high precision air chuck.
Machine No.Chuck Cap. Stem
Inches (mm)
Valve Head Max.Dia.
Inches mm
Net WeightLbs. (Kg)
Base DimensionsInches (mm)
Motors
2075HPA .1181-.6692 (3-17) 6(150) 290 (132) 25-3/4x18 (650x460) Grinding Head-1/2 H.P (.37 Kw)
Chuck-1/6 H.P (.13 Kw)
Pump- 1/70 H.P (.01 Kw)
RightDressin Chuck End Grindin Vee Chuck S lashAttach. Type Attach. Wheels Block Wrench Coolant Shields Guard
OptionalRocker
ArmAttach.
63283 Lever 53783
173 Standard-Left177 Optional-Left
(for Stellite)81-Right
53589
601, 604,
6529966789
250 Oil 631 B 53564 656G
Includes the following collets: Optional collets:
#607-6 5-6 mm (.1968"-.2362") #607-4 3-4 mm (.1181"-.1574")
#607-7 6-7 mm (.2362"-.2755") #607-5 4-5 mm (.1574"-.1968")#607-8 7-8 mm (.2755"-.3149") #607-11 10-11 mm (.3937"-.4330")#607-9 8-9 mm (.3149"-.3543") #607-12 11-12 mm (.4330"-.4724")#607-10 9-10 mm (.3543"-.3937") #607-13 12-13 mm (.4724"-.5118")
#607-14 13-14 mm (.5118"-.5511”)#607-15 14-15 mm (.5511"-.5905")
*When measured with a high precision test #607-16 15-16 mm (.5905"-.6299")
Bar and indicator at 1-7/16" from end of chuck. #607-17 16-17 mm (.6299"-.6692")
1-800-433-1870www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
4/13
VALVE RECONDITIONING EQUIPMENT
The New Auxiliary Collet Mini-Chuck No. A30C
Grind Small Valves with Precision• Small Engines• Motorcycles• 4-Valve Heads
Kit includes:1- Arbor - Length: 6-3/4" (170 mm) Diameter:1/2" (13 mm)5 Collets:*
* Replacement 5 Piece Collet Set: No. A30D
Nominal Size Range-Inches Range-mm1/8" .0938"-.1250" 2.382-3.175 mm5/32" .1250"-.1562" 3.175-3.969 mm3/16" .1563"-.1875" 3.970-4.762 mm7/32" .1875"-.2187" 4.762-5.556 mm1/4" .2188"-.2500" 5.557-6.350 mm
No. 644 Valve ServiceCabinet
SIOUX Valve Seat Indicator
Checking Valve Seats
No. X825 - SIOUX Valve SeatIndicator for tapered and expandingpilots having (3/8"+.010) upper end.No. X825 consists of indicator head,and sleeve for pilots with No. 2 upper end.
No. X825ASP - "Short" Sleeve for X825 indicators for "Short" taperedpilots having (3/8"+.010) No. 3 upper end.
No. X826 - SIOUX Valve SeatIndicator for tapered and expandingpilots having (9/16"+.010) No. 3upper end.
No. 644 - Valve Service Cabinet (stationary).Cabinet is of sturdy steel construction withlarge top surface, 31-3/4" x 18" (805 x460 mm) for valve face grinding machine.Valve racks are provided and shelf space for other required tools. Casters not available.
1-800-433-1870www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
5/13
VALVE RECONDITIONING ACCESSORIES
ShieldsUsed on valve stems to prevent the coolant from gettinginto the chuck.No. 638-Rubber Shields. Set of 5. For valve stems up to 13/16"(21 mm) diameter.
Accessories
No. 53589
Aligner BushingsTo grind valves longer than capacity of Floating Aligner,remove Floating Aligner and use Bushing as shown.
No. 682-4AL-160 ... 7/16" (11 mm) No. 682-4B-167 ... 7/8" (22 mm)No. 682-4AL-161 .... 1/2" (13 mm) No. 682-4B-168 .. 15/16" (24 mm)
No. 682-4AL-162 ... 9/16" (14 mm) No. 682-4B-169 … 1” (25 mm)No. 682-4AL-163 .... 5/8" (16 mm) No. 682-4B-170.. 1-1/16" (27 mm)No. 682-4B-163..... 5/8" (16 mm) No. 682-4B-171… 1-1/8" (29 mm)No. 682-4B-165..... 3/4" (19 mm) No. 682-413-172...1-1/4" (32 mm)No. 682-4B-166... 13/16" (21 mm)
No. 604- Aligner Wrench f its all valve grinding machines.
No. 601-Wrench. Used on 6024, 2001, 2075, 956 series.
No. 656G-Rocker Arm Attachment. Grinds auto, truck and tractor
rocker arms quickly and accurately. For Nos. 645, 680, 682, 956, 2001,
2075 and 6024 Valve Face Grinding Machines.
No. 53589-Chamfering vee for chamfering valve ends. Used with right
end attachment on 6024, 2001, 2075, 680 and 956.
Grinding OilNo. 250-2 Liters. Grinding Oil for 624, 680, 682, 685, 2001, 2075, 6024,956 machines and 645 Series 35217 up.
No. 632-Quart Concentrated Soluble Oil. Makes 10 gallons (38
Liters) of grinding solution.
No. 632G-2 Liters. Soluble Oil. Makes 20 gallons (76 Liters) of
grinding solution.
Valve Grinding Wheel Diamonds For Best
Results Use Sharp Diamonds
DiamondNo.
CaratSize
MachineNo.
Right End Attach.Where UsedDiamond No.
681 3/4 682, 856 1715A 3/8 Carat
112 1/4620,624,650, 6024
112 1/4 622,655
112 1/4 622N
112 1/4 657
112 1/4 661, 662,663
1715 1/4645,685L,2001,2075
1715 1/4 Carat
1715M * 1/4 680 1715 1/4 Carat
1715A 3/8 680 1715 1/4 Carat
112 1/4 6024 63222* 3/4 Carat
* Clusters
Grinding Wheels for Valve Face Grinding Machines Use only SIOUX replacement wheels to produce the most satisfactory results.
Size
Wheel Diameter Thickness Hole For Valve
No. In. mm in. mm in. mm Type Grit Shape Used On
78E 4 101.6 1/2 12.7 5/8 15.88 Automotive 60 Offset 645, 622N, 620, 624
78SP 4 101.6 1/2 12.7 5/8 15.88 Plunge Grinding 60 Offset 645, 622N, 620, 624
78A 4 101.6 1/2 12.7 5/8 15.88 Stellite Only 80 Offset 645, 622N, 620, 624
81 4 101.6 1 25.4 5/8 15.88 Valve Ends 54 Cup645, 680, 956, 6024,
2001,2075
83 4 101.6 1/2 12.7 5/8 15.88 Stellite 60 Offset 645, 624, 6024
173 7 177.8 11/16 17.46 1-3/4 44.45 General Purpose 90 Straight 680, 956, 2001, 2075
174 7 177.8 11/16 17.46 1-3/4 44.45 Titanium 100 Straight 680, 956, 2001, 2075
176 7 177.8 11/16 17.46 1-3/4 44.45 Nickel Alloy 60 Straight 680, 956, 2001, 2075
177 7 177.8 11/16 17.46 1-3/4 44.45 Stellite 80 Straight 680, 956, 2001, 2075
178PA 8 203.2 11/16 17.46 1-3/4 44.45 Aircraft Stellite 60 Offset 682
181 7 177.8 1 25.4 1-3/4 44.45 Valve Ends 36 Cup 682 with 619A
184 6 152.4 5/8 15.88 3/4 19.05 Automotive 60 Offset 685L
186 6 152.4 5/8 15.88 3/4 19.05 Stellite 80 Offset 685L
187 6 152.4 5/8 15.88 3/4 19.05 Stellite 60 Offset 685L
189 5 127.0 1 25.4 3/4 19.05 Automotive 46 Cup 685L
191 6 152.4 5/8 15.88 3/4 19.05 Stellite 80 Offset 685L
1-800-433-1870
www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
6/13
AIR AND ELECTRIC SEAT GRINDING DRIVERS
Electric
No. 1710 High SpeedNo. 1712 Heavy Duty
• Spline drive• Available in 230 volt AC-DC and 120 volt AC-DC• 50-60 Hz, 1 Ph• Spring loaded spindle for dual-action grinding
Electric Driver Specifications
Angle No Load Wheel Length Net Wt. Max.Cat. of Speed Diameter Ins. Lbs. H.P. Use with
No. Drive R.P.M. Volts Amps Capacity (mm) (Kg) (Kw) Holders
1710/1710J 15° 10,000 115/230 6/3 2-1/2" (65 mm) 11-1/2 (290) 7-1/2(3) .6 (.45) 1672/1702
1712/1712J 15° 8,000 115/230 7/3.5 3" (75 mm) 12-1/2 (315) 8-3/4(4) 1 (.75) 1672/1702
Air
No. 1792
• Lightweight• Spline drive• Governor controlled
No. 1788LX Remote Exhaust
Air Driver Specifications
Angle No Load Hose Wheel Length Net Wt. Max.
Cat. of Speed Hose Size Diameter Ins. Lbs. H.P. Use withNo. Drive R.P.M. Conn. (mm) Capacity (mm) (Kg) (Kw) Holders
1788LX Straight 10,000 1/4"PT 3/8" (10) 2-1/2" (65 mm) 11-1/18 (285) 5-1/2(3) 1 (.75) 1672/1702
1792 15° 10,000 1/4"PT 3/8" (10) 2-1/2" (65 mm) 11-3/4 (300) 4-3/4(2) 1 (.75) 1672/1702
See page 9 for grinding wheel holders.
1-800-433-1870
www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
7/13
VALVE SEAT GRINDING SETS
1725E – 110V/1725EJ – 230VElectric Valve Seat Grinder SetFor General Automotive Service
Consists of the following items:
1 -No. 1710.................................................................High Speed Driver 1 -No. 1702 ........................................................................Wheel Holder 1 -No. 1716 ....................................Capacity 4" (100 mm) Dressing Tool1 -No X811.......... ..............................................….............................Pin1 -No. 1435.........................................................................Lifting Spring1 -No. 1437.........................................................................Lifting Spring1 - No.1757..............................................................................Metal Box
Finishing Wheels
1 - SK3...1-5/16" (33 mm) .....45° 1 - K28......2-1/8" (54 mm)...... 45°1 - SK5.....1-3/8" (35 mm) .....45° 1 - K42.....2-1/4" (57 mm)....... 45°1 - SK9.....1-1/2" (38 mm) .....45° 1 - K413...1-5/8" (41 mm)....... 30°1 - K13.....1-5/8" (42 mm) .....45° 1 - K421...1-7/8" (48 mm)....... 30°1 - K17.....1-3/4" (45 mm) .....45° 1 - K425 ........2" (50 mm)....... 30°1 - K21 ....1-7/8" (48 mm) .....45° 1 - K428 ..2-1/8" (54 mm)....... 30°1 - K25...........2" (50 mm) .....45
°1 - K442...2-1/4" (57 mm)....... 30°
Roughing Wheels1 - SK79...1-1/2" (38 mm) .....45° 1 - K87 ....1-3/4" (45 mm)....... 45°
1 - K83.....1-5/8" (42 mm) .....45° 1 - K91 ....1-7/8" (48 mm)....... 45°
Tapered Pilots1 - Each ............................................................T312, T313, T314, T3151 - Each ............................................................T343, T344, T345, T3461 - Each ................................................. T373, T374, T375, T376, T3771 - No. C118....................................................Expanding Guide Cleaner No. 1725EEX - Same as 1725E, except with expanding pilots - E343,E312, E375.No. 1725LB - Same as 1725E, except no 1757 Metal Box.
Basic Valve Seat Grinding Sets
No. 1750E Basic Electric Grinder Set-110VNo. 1750EJ-230V
Consists of the following items:No. 1710.................................................. High Speed Driver, 15
° angle
No. 1702.......................................................Ball Bearing Wheel Holder No. 1716........……………............. Capacity 4" (100 mm) Dressing ToolNo. X811 ................……...................................................................PinNo. 1757.................................................................................Metal BoxNo. 1435............................................................................Lifting SpringNo. 1437............................................................................Lifting Spring
o. as c r r n er eConsists of the following items:
No. 1792............................................ Air High Speed Driver, 15° angleNo. 1702.......................................................Ball Bearing Wheel Holder No. 1716....................................... Capacity 4" (100 mm) Dressing ToolNo. X811........................................................…................................PinNo. 1435..................................... ......................................Lifting SpringNo. 1437............................................................................Lifting SpringNo. 1757.................................................................................Metal Box
1-800-433-1870
www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
8/13
COMPLETE VALVE SEAT GRINDING SETS
No. 1771A
o. r a ve ea r n er eFor General Automotive ServiceConsists of the following items:1 - No. 1792 ………………………………….Air High Speed Driver 1 - No. 1702 .............................................................Wheel Holder 1 - No. 1716 ........ ................Capacity 4" (100 mm) Dressing Tool1 - No. X811..............................................................................Pin1 - No. 1435……………………………………………..Lifting Spring1 - No. 1437...............................................................Lifting Spring1 - No. 1757..... ..............................................................Metal Box
Finishing Wheels1 - SK3...1-5/16" (33 mm) ....45°1 - SK5..... 1-3/8" (35 mm) ...45°1 - SK9..... 1-1/2" (38 mm) ...45°1 - K13.....1-5/8" (42 mm) .....45°1 - K17.....1-3/4" (45 mm) .....45°1 - K21 .....1-7/8" (48 mm) ....45°1 - K25............2" (50 mm) ....45°
Roughing Wheels1 - SK79...1-1/2" (38 mm) ....45°1 - K83..…1-5/8" (42 mm) ...45°
1 - K28 .....2/18" (54 mm)…... 45°1 - K42....2-1/4" (57 mm)…... 45°1 - K413…1-5/8" (41 mm)......30°1 - K421..1-7/8" (48 mm)....... 30°1 - K425 ........2" (50 mm)....... 30
°
1 - K428..2-1/8" (54 mm)....... 30°1 - K442..2-1/4" (57 mm)....... 30°
1 - K87....1-3/4" (45 mm)......45°1 - K91 ....1-7/8" (48 mm).... 45°
Tapered Pilots1 - Each ..................................................T312, T313, T314, T3151 - Each ..................................................T343, T344, T345, T3461 - Each ....................................... T373, T374, T375, T376, T3771 -No. C118...........................................Expanding Guide Cleaner
No. 1726E Heavy Dutyec r c a ve ea r n er e
Consists of the following items:1 - No. 1712 ......................................................Heavy Duty Driver
2 - No. 1702 ..............................................................Wheel Holder 1 - No. 1716 ..........................Capacity 6" (150 mm) Dressing Tool1 - No. 2A............................................................................Wrench1 - No. X811 ..............................................................................Pin1 - No. 1436................................................................Lifting Spring1 - No. 1437…............................................................Lifting Spring1 - No. 1757....….............................................................Metal Box
Finishing Wheels1 - SK5..... 1-3/8" (35 mm) .....45°1 - SK9..... 1-1/2" (38 mm) .....45°1 - SK409.1-1/2" (38 mm) .....30°1 - K13.....1-5/8" (42 mm) …....45°1 - K413...1-5/8" (42 mm) ......30°
1 - K17.....1-3/4" (45 mm) ..…..45°1 - K417...1-3/4" (45 mm) ......30°1 - K21 .....1-7/8" (48 mm) .....45°1 - K25............2" (50 mm) .....45°1 - K28 ......2/18" 54 mm ...….45
°
1 - E312............................................5/16" (8 mm) Expanding Pilot1 - E343..........................................11/32" (9 mm) Expanding Pilot1 - E375............................................3/8" (10 mm) Expanding Pilot1 - E406.....................................13/32" (10.3 mm) Expanding Pilot1 - E437..........................................7/16" (11 mm) Expanding Pilot1 - E500............................................1/2" (13 mm) Expanding Pilot1 - C118.................................................Expanding Guide Cleaner 1 - 225 .......................................................Carbon Cleaning Brush1 - 226 .......................................................Carbon Cleaning Brush
1- K42....2-1/4" (57 mm)... 45°1- SK75..1-3/8" (35 mm)... 45°1- K83....1-5/8" (42 mm)....45°1- K483..1-5/8" (42 mm)....30°1- K87....1-3/4" (45 mm)....45°1- K487..1-3/4" (45 mm)....30°1- K95 ..........2" (50 mm)...45°1- K98....2-1/8" (54 mm)....30°1- K102..2-1/4" (57 mm)....45°
1-800-433-1870
www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
9/13
VALVE SEAT GRINDING ACCESSORIES
No. 1672 No. 1702 No. 1703-5 No. 1703-7 No. 1703 Lifting Springs
Lifting Springs
Lifting Springs are recommended under all
wheels. They can be used on most jobssaving drive unit and wheel breakage. Madein 5 lengths.
Place the lifting spring on pilot and bring the
wheel up to speed before grinding.
No.1432..................... 1-1/2" (38 mm) for use with "SK" WheelsNo.1433...................... 2-1/4" (57 mm) for use with "SK" WheelsNo.1434 ...3" (76 mm) For use with TSS Pilots and "SK" WheelsNo.1435 ........................1-1/2" (38 mm) long for No.2 Top PilotsNo.1436............................... 2" (51 mm) long for No.2 Top PilotsNo.1437 ........................2-1/2" (64 mm) long for No.2 Top PilotsNo.1442 .......................5-1/2" (140 mm) long for No.3 Top Pilots
FlangeNo. 1703-7-Flange for holder. Threads onto No. 1703 Holder to
handle large wheels with 1 " (25 mm) smooth center hole.
No. 1703-8-Spanner Wrench. For use with no. 1703-7Flange and No. 1703-5 Holder.
Wheel Holders
Ball bearing are mounted between the inner and outer sleeves
The hardened and precision ground inner sleeve floats onthe pilot and reduces friction and wear.
No. 1702-Ball Bearing Grinding Wheel Holder, 11/16"-16
thread. For use with No. 2 SIOUX upper end tapered or
expanding pilots having 3/8" + .010 upper end. Size 1-1/4"
(32 mm) diameter by 5" long (125 mm) long.
No. 1703-Ball Bearing Grinding Wheel Holder 7/8"-14 thread.For use with No. 3 SIOUX upper end tapered or expanding pilohaving 9/16" + .010 upper end.
No. 1672-"Short" Ball Bearing Grinding Wheel Holder, 11/16"-
16 thread. For use with tapered pilots having short No. 2 upper
end. 1-1/4" (32 mm) diameter by 3-3/16" (81 mm) long.No. 1703-5-Ball Bearing Grinding Wheel Holder with No. 1703-
Flange for large wheels with 1 " (25 mm) smooth center, also fo
No. 3 Hole threaded wheels, omitting the lower flange. 7/8"-14
thread. For use with No. 3 SIOUX upper end pilots having 9/16"
+ .010 upper end. Size 1-1/2" x 5" (38 x 125 mm) long.
NOTE: Metric Equivalent of 3/8" + .010" = 9.78 mm and9/16" + 0.10" = 14.54 mm
Valve Guide Brushes
Tynex NylonComprises .014 stiff Nylon bristle wound in steel wire with
the size marked on the metal shank. SIOUX Valve Guide Cleaners ExpandingThe strong tough Tynex Nylon bristles clean the valve guidesfast and thoroughly, remove carbon, sludge and varnishwithout injury to the guide.
Number Guide Size
N250 ......................................................................1/4" (6 mm)
N312 ....................................................................5/16" (8 mm)
N343 ...................................................................11/32" (9 mm)
N375 .....................................................................3/8" (10 mm)
N437 ...................................................................7/16" (11 mm)
N500........................................................1/2"-9/16" (13-14 mm)
N625 .....................................................................5/8" (16 mm)
N750......................................................................3/4" (19 mm)
No. C118-Expanding Valve Guide Cleaner, complete with oneextra set of blades.
Adjustable for valve guides from 5/16" to 5/8" (8 to 16 mm). Thflat spring steel blades press against the guide by spring tensioand scrape out the carbon without injury to the guides.
No. C118A-Set of replacement blades for expanding valveguide cleaner.
1-800-433-1870
www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
10/13
VALVE SEAT GRINDING ACCESSORIES
Now, check your entire valve train-valve, seat, stem andguide-quickly and accurately.
No. 1630ESK consists of :1630..................................................................Vacuum Tester 1630-2..............................................................2" (50 mm) Disc1630-3..............................................................3" (75 mm) Disc1630-4............................................................4" (100 mm) Disc1630B ...............................................................................Hose1630C.........................................................Spark Plug Adapter
Optional Equipment:1630-6..............…….........………...................6" (150 mm) Disc
SIOUX Heavy Duty Dressing ToolsFor Automotive and Aircraft Valve Seat Grinding Wheels
No. 1716-Heavily built for extreme accuracy and ideal for production service. Capacity up to 6 in. Designed with completeadjustments for dressing ALL SIZES of SIOUX valve seatgrinding wheels, including angles from zero to 90°. Equippedwith No. 1715 Diamond adjusting screw, guard and No. 1718Apilot for No. 1702 wheel holder. Height, 9" (230 mm), base,6" x 6" (150 x 150 mm).
1716-3-Same as No. 1716 except has No. 1718B No. 3 upper end pilot for use with No. 1703.SK9-10-Bushings for use with 1716 and SK type wheels.
No. 1715-Replacement Diamond, 3/8"-24 thread. 1/4KT.
No. 1715A-Heavy Duty Diamond, 3/8"-24 thread. 3/8 KT.
No. 1715B-Replacement Hex Diamond, 3/8 KT. for No. 1719,1719A, 1772 and 1772D.
No. 1718A-Pilots for No. 1716, 1719, 1719A, 1713, 1713A,1713B, 1713C and 1713D dressing tools for use with No. 1702wheel holder.
No. 1718B-Pilot for No. 1716, 1719, 1719A, 1713, 1713A,1713B, 1713C and 1713D dressing tools for use with No. 1703wheel holder.
No. 1718C-Pilot for No. 1716, 1719, 1719A, 1713, 1713A,1713B, 1713C and 1713D dressing tools for use with No. 1672wheel holder.
1-800-433-1870
www.woodwardequipment.com
No.1630ESKVacuumTesting Kit
-
8/20/2019 Catalogo Sioux
11/13
STANDARD STOCK SIZE TAPERED PILOTS
The Patented Pilot illustrated shows length of Tapered Pilot from end to end indicated as
"overall length." The other section of the Pilot Isindicated as "upper end." Charts list Pilots In
numerical se uence b catalo numbers.Order by Catalog Number. SIOUX Pilots are either SIOUX No. 2 upper end (3/8" + .010 or SIOUX No. 3 upper end (9/16" + .010).
Size
Cat. Decimal Overall Length Upper End
No. Fractional In. mm In. mm In mm
T157 4 mm .157 4.00 6.125 156 4 102
T177 4.4 mm .177 4.40 6.125 156 4 102
T196 3/16+ .009 .196 5.00 6.125 156 4 102
T197 3/16+ .010 .197 5.01 6.125 156 4 102
T198 3/16+ .011 .198 5.03 6.125 156 4 102
T215 7/32- .003 .215 5.47 6.125 156 4 102
T216 7/32- .002 .216 5.49 6.125 156 4 102
T217 7/32- .001 .217 5.51 6.125 156 4 102
T218 7/32 .218 5.54 6.125 156 4 102
T235 15/64+ .001 .235 5.97 6.125 156 4 102
T236 15/64+ .002 .236 6.00 6.125 156 4 102
T237 15/64+ .003 .237 6.02 6.125 156 4 102
T238 15/64+ .004 .238 6.05 6.125 156 4 102
T239 15/64+ .005 .239 6.07 6.125 156 4 102
T250 1/4 .250 6.35 6.125 156 4 102
TSS250 1/4 .250 6.35 4.625 117 2.5 64
T251 1/4+ .001 .251 6.38 6.125 156 4 102
TSS251 1/4+ .001 .251 6.38 4.625 117 2.5 64
T253 1/4+ .003 .253 6.43 6.125 156 4 102
T259 ¼+ .009 .259 6.58 6.125 156 4 102
T260 1/4+ .010 .260 6.60 6.125 156 4 102
T261 17/64- .004 .261 6.63 6.125 156 4 102
T274 9/32- .005 .274 6.98 6.125 156 4 102
T275 9/32- .006 .275 7.00 6.125 156 4 102
T276 9/32- .005 .276 7.01 6.125 156 4 102
T277 9/32- .004 .277 7.04 6.125 156 4 102
T280 9/32- .001 .280 7.11 6.125 156 4 102
T281 9/32 .281 7.14 6.125 156 4 102
TSS281 9/32 .281 7.14 4.625 117 2.5 64
T282 9/32+ .001 .282 7.16 6.125 156 4 102
TSS282 9/32+ .001 .282 7.16 4.625 117 2.5 64
T310 5/16- .002 .310 7.87 7.375 187 4 102
T311 5/16- .001 .311 7.90 7.375 187 4 102
T312 5/16 .312 7.92 7.375 187 4 102
TS312 5/16 .312 7.92 8.375 213 5 127
TSS312 5/16 .312 7.92 5.875 149 2.5 64
T313 5/16+ .001 .313 7.95 7.375 187 4 102
TSS313 5/16+ .001 .313 7.95 5.875 149 2.5 64
T314 5/16+ .002 .314 7.98 7.375 187 4 102
T315 5/16+ .003 .315 8.00 7.375 187 4 102
T316 5/16+ .004 .316 8.03 7.375 187 4 102
T317 5/16+ .005 .317 8.05 7.375 187 4 102
T318 5/16+ .006 .318 8.08 7.375 187 4 102
T328 21/64 .328 8.33 7.375 187 4 102
T340 11/32- .003 .340 8.64 7.5625 192 4 102
T341 11/32- .002 .341 8.66 7.5625 192 4 102
T342 11/32- .001 .342 8.69 7.5625 192 4 102
Size
Cat. Decimal Overall Length Upper End
No. Fractional In. mm In. mm in mm
T343 11/32 .343 8.71 7.5625 192 4 102
T344 11/32+ .001 .344 8.74 7.5625 192 4 102
T345 11/32+ .001 .345 8.76 7.5625 192 4 102
T346 11/32+ .003 .346 8.79 7.5625 192 4 102
T353 11/32+ .010 .353 8.97 7.5625 192 4 102
T354 23/64- .005 .354 9.00 7.5625 192 4 102
T355 23/64- .004 .355 9.02 7.5625 192 4 102
T356 23/64 -.003 .356 9.04 7.5625 192 4 102
T357 23/64- .002 .357 9.07 7.5625 192 4 102
T358 23/64- .001 .358 9.09 7.5625 192 4 102
T360 23/64+ .001 .360 9.15 7.5625 192 4 102
T370 3/8- .005 .370 9.40 8 203 4 102
T371 3/8- .004 .371 9.42 8 203 4 102
T372 3/8- .003 .372 9.45 8 203 4 102
T373 3/8- .002 .373 9.47 8 203 4 102
T374 3/8- .001 .374 9.50 8 203 4 102
T375 3/8 .375 9.53 8 203 4 102
TSS375 3/8 .375 9.53 6.5 165 2.5 64
T376 3/8+ .001 .376 9.55 8 203 4 102
T377 3/8+ .002 .377 9.58 8 203 4 102
T378 3/8+ .003 .378 9.60 8 203 4 102
T379 3/S+ .004 .379 9.63 8 203 4 102
T380 3/8+ .005 .380 9.65 8 203 4 102
T381 3/8+ .006 .381 9.68 8 203 4 102
T385 25/64- .005 .385 9.78 8 203 4 102
T388 25/64- .002 .388 9.86 8 203 4 102
T389 25/64 -.001 .389 9.89 8 203 4 102
T390 25/64 .390 9.91 8 203 4 102
T393 25/64+ .003 .393 10.00 8 203 4 102
T394 25/64+ .004 .394 10.01 8 203 4 102
T405 13/32- .001 .405 10.29 8 203 4 102
T433 7/16- .004 .433 11.00 8.75 222 4 102
T435 7/16- .002 .435 11.05 8.75 222 4 102
TS435 7/16- .002 .435 11.05 10 254 5 127
T436 7/16- .001 .436 11.07 8.75 222 4 102
T437 7/16 .437 11.10 8.75 222 4 102
T438 7/16+ .001 .438 11.13 8.75 222 4 102
TS453 29/64 .453 11.51 10 254 5 127
T468 15/32 .468 11.9 8.75 222 4 102
T562 9/16 .562 14.27 9 229 4 102
NOTE: use 1702 Holder with "T" and "TS" Pilots through .503"(12.78 mm). Use 1703 Holder for "T" and "TS" Pilots .562" (14.27mm) and up. Use 1672 Holder for all "TSS" Pilots. 3/8" + .010" =9.78 mm and 9/16" + .010" = 14.54 mm.
1-800-433-1870www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
12/13
TAPERED EXPANDING PILOTS VALVE GUIDE REAMERS
(EXPANDING PILOTS CAN ONLY BE SUPPLIED IN SIZES LISTED BELOW)
SIOUX Tapered Expanding Pilots are self-centered in the valve guide.Range of expansion will handle valve guides from minus .002 (.05 mm)to plus .008 (.20 mm) on all standard sizes, thus reducing the numberof pilots necessary for worn guides. Used with the same wheel holdersas SIOUX Tapered Pilots.
SIOUX Tapered Expanding Pilots 9/16" + .010
No. 3 Upper End for 1703 Wheel Holder (14.54mm)
Cat. Size A B
No. Ins. mm Ins. mm Ins. mm
E562 9/16 14 4-1/2 114 3-3/4 95
E625 5/8 16 4-1/2 114 3-3/4 95
E750 3/4 19 4-3/4 121 5/18 130
3/8" + .010 No. 2 Upper End for No. 1702Grinding Wheel Holder (9.78 mm Upper End)
Cat. Size A B
No. Ins. mm Ins. mm Ins. mm
E6MM .236 6 3.625 92 1.875 48
E250 1/4 6.4 3.75 95 1.875 48
E6.5MM .256 6.5 3.75 95 1.875 48
E7MM .275 7 3.75 95 1.875 48
E281 9/32 7.1 3.75 95 1.875 48
E7.5MM .295 7.5 3.75 95 1.875 48
E312 5/16 7.9 3.75 95 2.25 57
E8MM .315 8 3.75 95 2.25 57
E328 21/64 8.3 3.75 95 2.25 57
E8.5MM .335 8.5 3.75 95 2.25 57
E343 11/32 8.7 3.75 95 2.5 64
E9MM .354 9 3.75 95 2.5 64
E359 23/64 9.1 3.75 95 2.5 64
E375 3/8 9.5 3.75 95 2.625 67
E390 25/64 9.9 3.75 95 2.625 67
E10MM .393 10 3.75 95 2.75 70
E396 .396 10.1 3.75 95 2.625 67
E403 .403 10.2 3.75 95 2.875 73
E406 13/32 10.3 3.75 95 2.875 73
E10.5MM .413 10.5 3.75 95 2.75 70
E11MM .433 11 3.75 95 2.875 73
E437 7/16 11.1 3.75 95 2.875 73
E453 29/64 11.5 3.75 95 2.875 73
E468 15/32 11.9 3.75 95 2.875 73
E12MM .472 12 3.75 95 2.875 73
E500 1/2 12.7 4.5 114 3.375 86
renc or xpan ng o sNo. 2A-SIOUX Wrench for use with Expanding Pilots having3/8" + .010 upper end (9.76 mm).
GH Indicates Hi h S eed Reamer
Catalog Number Fractional Length& Decimal Size Ins. mm Ins. mm
GH236 15/64+ .002 5.99 7 178
GH250 1/4 6.35 7 178GH260 1 4+ .001 6.60 7 178GH275 9/32- .006 6.99 7 178GH277 9/32 - .004 7.04 7 178GH310 5/16- .002 7.87 7 178GH311 5/16- .001 7.90 7 178GH312 5/16 7.92 7 178GH313 5 16+ .001 7.95 7 178GH314 5 16+ .002 7.98 7 178GH315 5/16+ .003 8.00 7 178GH316 5/16+ .004 8.03 7 178GH317 5 16+ .005 8.05 7 178GH318 5/16+ .006 8.08 7 178
GH340 11/32- .003 8.64 7 178GH341 11 32- .002 8.66 7 178GH342 11 32- .001 8.69 7 178GH343 11/32 8.71 7 178GH344 11/32+ .001 8.74 7 178GH345 11 32+ .002 8.76 7 178GH346 11/32+ .003 8.79 7 178GH347 11/32+ .004 8.81 7 178GH348 11 32+ .005 8.84 7 178GH353 11/32+ .010 8.97 7 178GH354 23/64- .005 8.99 7 178GH355 23 64- .004 9.02 7 178GH356 23/64- .003 9.04 7 178GH358 23/64- .002 9.09 7 178GH371 3/8- .004 9.42 7 178GH372 3 8- .003 9.45 7 178GH373 3/8- .002 9.47 7 178
GH374 3/8- .001 9.50 7 178GH375 3 8 9.53 7 178GH376 3/8+.001 9.55 7 178GH377 3/8+.002 9.58 7 178GH378 3 8+.003 9.60 7 178GH380 3/8+.005 9.65 7 178GH385 25/64- .005 9.78 7 178GH388 25 64- .002 9.86 7 178GH390 25 64 9.91 7 178GH393 25/64+ .003 9.98 7 178GH394 25/64+ .004 10.01 7 178GH396 25/64+ .006 10.06 7 178GH403 13 32- .003 10.24 7 178GH404 13/32- .002 10.26 7 178GH405 13/32- .001 10.29 7 178GH406 13/32 10.31 7 178GH433 7/16- .004 11.00 7 178
GH434 7/16- .003 11.02 7 178GH435 7 16- .002 11.05 7 178GH436 7/16- .001 11.07 7 178GH437 7/16 11.10 7 178GH438 7 16+ .001 11.13 7 178GH453 29 64 11.51 7 178GH499 1/2- .001 12.67 7 178GH500 1/2 12.70 7 178GH561 9/16- .001 14.25 7 178GH562 9 16 14.27 7 178GH625 5/8 15.88 7 178
Order by Catalog Number. Catalog Number is Decimal Size.
No. 251-Quart (.95 Liter) Reamer Cutting Oil.
1-800-433-1870www.woodwardequipment.com
-
8/20/2019 Catalogo Sioux
13/13
VALVE SEAT GRINDING WHEELS
SMALL VALVE SEATS STANDARD WHEELS FOR IRON AND STEEL
No. 2 Hole11/16"-16 Thread for
No. 1672
and No. 1702 Holders
No. 2 Hole11/16"-16 Thread for
No. 1672 andNo. 1702 Holders
No. 3 Hole7/8"-14 Thread for
No. 1703 Holder
Limited availability over 3.0”
No. 5 Hole
Smooth-No Threadfor No. 1703-5 Holder
Limited availability
45" 45" 30" 30" 45" 45" 30" 30" 45" 45" 30" 30" 45" 45" 30" 30"SizeIns. (mm) Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough Finish Rough
1 -1 /16( 27 ) S K- 1B S K- 70A S K- 32 S K- 36
1-1/8(29) SK-1A SK-70 SK-33 SK-37
1 -3 /16( 30 ) S K- 1C S K- 71A S K- 34 S K- 38
1 -1 /4(3 2) SK- 1 SK -71 SK -40 1 SK-4 71
1 -5 /16 (33) SK- 3 SK -73 SK -40 3 S K-47 31 -3 /8(3 5) SK -5 SK-7 5 SK-4 05 S K-4 75
1 -7 /16 (37) SK -7 SK-7 7 SK-4 07 SK-4 77
1-1/2 (38) SK-9 SK-79 SK-409 S K-479 K-9 K-79 K-409 K-479
1-9/16(40) K-11 K-81 K-411 K-481
1-5/8 (41) K-13 K-83 K-413 K-483
1-11/16 (43) K-15 K-85 K-415 K-485
1-3/4(44) K-17 K-87 K-417 K-487
1-7/8(48) K-21 K-91 K-421 K-491
2(51) K-25 K-95 K-425 K-495
2-1/16(52)
SK-9-10 sleeves are used on thepilot of the SIOUX dressing standsto locate the SK type valve seat
grinding wheels properly fordressing K-27 K-97 K-427 K-497
GRINDING WHEELS NOT TO BE OPERATEDABOVE 6500 S.F.P.M.
SIOUX Valve Seat Grinding Wheels are all madeto most exacting specifications. Each is designedfor a specific job. Speed is most important and awheel should not be used that turns above itsallowable surface feet per minute speed. This ison the 6500 S.FP.M. averageOverspeed glazes the wheel so it cannot cut andcould result in breakage of wheels.
2-1/8(54 K-28 K-98 K-428 K-498
2-1/4(57) K-42 K-102 K-442 K-512
2-3/8(60) K-44 K-104 K-444 K-514
2-1/2(64) K-46 K-106 K-446 K-516
2-5/8(67) K-629 K-569 K-749 K-759 K-49 K-109 K-449 K-519
2-3/4 70 K-631 K-571 K-751 K-761 K-51 K-111 K-451 K-521
2-7/8 (73) K-633 K-573 K-753 K-763 K-53 K-113 K-453 K-523
3 (76) K-635 K-575 K-755 K-765 K-55 K-115 K-455 K-525
3-1/8 (79) K-56 * * K-5263-1/4 (83) K-57 * K-457 K-527
3-3/8 (86) * * K-458 K-528
3-1/2 (89) * K-119 K-459 *
3-5/8(92) * * K-460 K-530
3-3/4 (95) K-61 * K-461 *
4 (102) * K-123 * K-533
4-1/8 (105) * * * *
4-1/4(108) * * * *
4-3/8(111) * * * *
4-1/2 (114) K-67 * K-467 *
4-3/4 (121) * * * *
5 (127) * K-129 * *
5-1/4 (133) * * K-432 *
5-1/2 (140)
WHEELS AVAILABLE FOR STELLITE
Wheels available 1-1/16" (25 mm) thru 3" (76 mm).To order suffix-WS behind K number. (Example K-98-WS.)
Same price .Note: All sizes not available in "WS" wheels.
*Use next closest size and/or angle wheel. Re-dress to suit.
* * * *
5-3/4(146) * * * *
6(152) * * K-436 *
NOTE: When specs call for 1/16" (27 mm) size wheel and none isshown in the chart above, the next larger size wheel will be substi-
tuted. Example: Order calls for 2-9/16" (65 mm) wheel, 2-5/8"(67mm) will be substituted. This also applies where no 1/8" (3 mm)size wheel is listed. Wheels can be dressed to a smaller diameter orto any degree of face with appropriate SIOUX Dressing Tools.
No. 47 No. 47BDNo. 47-Threaded Bushing for reducing No. 3 hole grinding wheels to No. 2 hole. Usedwith No. 1702 Holder.No. 47BD-For using SIOUX Valve Seat Grinding Wheels with Black & Decker Holders.
Valve Seat Grinding WheelReplacement SetNo. K100-A set of seven of the mostpopular Valve Seat Grinding Wheelspacked in a clear plastic box. Complete with No. 47BD threaded bushing.ncludes SK5, K9, K13, K17, K21, K25 and K28
wheels. Fit SIOUX, K.O. Lee, Snap-On andBlack & Decker Seat Grinding Sets.
1-800-433-1870www.woodwardequipment.com