catalogo tbh - tba ita-ing. 04.2016:catalogo tbh - tba ita
TRANSCRIPT
NA4.CC.TBHA.I0
00/ZC.US/UZ
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 1
POMPE AUTOADESCANTI CENTRIFUGHE ALCUNI ESEMPI COSTRUTTIVISOME INSTANCES OF CONSTRUCTION
2 19
• Pompe autoadescanti centrifughe multistadio ad asseorizzontale e bocche di aspirazione e mandata verticali.
• Pompaggio di miscele di gas liquidi e non abrasivi.• Idonee per basse portate ad alte prevalenze.• Capacità di aspirazione fino a 8,5 m.c.a. di vuoto.• Basse velocità di rotazione per un’elevata affidabilità,
silenziosità e lunga durata di funzionamento.• Assenza di spinte assiali sui cuscinetti grazie alle giranti
libere bilanciate idraulicamente.• Tenute meccaniche di serie unificate secondo le norme
UNI EN 12756.• Possibilità di esecuzione con tenute meccaniche doppie
contrapposte o in serie e con raffreddamento oriscaldamento delle camere tenuta.
• Progetto innovativo con ridotto numero di componenti.• A richiesta esecuzione monoblocco accoppiata tramite
giunto elastico a motore unificato forma B5 fino a 22 kW.• Ampia scelta di materiali costruttivi per soddisfare
molteplici esigenze.• Portate fino a 70 m3/h.• Prevalenze fino a 40 bar.
TBH
APPLICAZIONI / APPLICATIONS
• Multistage self-priming centrifugal pumps with horizontalmounting vertical suction and discharge flanges.
• Capable of handling mixtures of gas and clean liquids.• Low capacity - high head.• Suction lift to 8,5 m.w.c.• Low operating speed for extended life, low vibration, low
noise level and maximum reliability.• Impellers are individually hydraulically balanced thus end
thrust forces to bearings are eliminated.• Mechanical seals are standard and unified to UNI EN 12756.• Optional double mechanical seals back to back or tandem.• Cooled or heated seal housing are available.• Reduced number of components is achieved by design
innovation.• Choice of motor mounting, including close-coupled through
flexible coupling to unified B5 motor, up to 22 kW.• Variety of materials are available to meet specific
requirements.• Capacities to 70 m3/h• Heads to 40 bar.
• Le pompe della serie TBH e TBA sono adatte alpompaggio di liquidi puliti, corrosivi, caldi o freddinell’industria chimica, petrolchimica, farmaceutica edalimentare.
• Estrazione di condensati e distillati.• Impianti di stoccaggio solventi e carburanti.• Alimentazione caldaie.• Estrazione da processi sottovuoto.• Impianti di imbottigliamento e rifornimento G.P.L. e gas
liquefatti.• Gruppi antincendio ed autoclavi.• Servizi generali e sentine nell’industria navale.• Impianti di lavaggio.
• Pumps series TBH and TBA are suitable to handle cleanliquids, corrosives, hot or cold in the chemical,petrochemical, pharmaceutical, food industries, etc.
• Removal of condensates and distilled liquids.• Solvents and liquified gases applications.• Boiler feed applications.• Removal or liquid from processes under vacuum.• Filling stations and transfer of LPG and liquified gases.• Fire fighting systems and autoclaves.• Potable and sanitary systems in the naval industry.• Spray washing installations.
Pompa serie TBKEsecuzione di una pompa serie TBH ad ASSENUDO con TRASCINAMENTO MAGNETICO.Pump series TBKBARESHAFT pump series TBH withMAGNETIC DRIVE.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREIDRAULICO.Pump series TBHCLOSE-COUPLED to HYDRAULIC MOTOR.
Pompa serie TBAKEsecuzione di una pompa serie TBA adASSE NUDO con TRASCINAMENTOMAGNETICO.Pump series TBAKBARESHAFT pump series TBA withMAGNETIC DRIVE.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREELETTRICO in versione VERTICALE.Pump series TBHCLOSE-COUPLED to ELECTRIC MOTORin VERTICAL version.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 2
318
SELF-PRIMING CENTRIFUGAL PUMPSALCUNI ESEMPI COSTRUTTIVISOME INSTANCES OF CONSTRUCTION
Derivate dalla serie TBH con l’aggiunta di un prestadiocentrifugo, queste pompe raggiungono un valore di NPSHmolto basso che le rendono particolarmente idonee alpompaggio di liquidi vicini al punto di ebollizione ed incondizioni gravose.La particolare esecuzione garantisce il convogliamento diliquidi contenenti gas e, in special modo, gas liquefatti.Tutte le altre caratteristiche prestazionali, costruttive e diimpiego della serie TBH sono conservate in questa serie dipompe, garantendo così anche una elevata modularità edintercambiabilità per una maggior semplicità di gestione deicomponenti a magazzino.Portate fino a 35 m3/h.Prevalenze fino a 40 bar.
TBAThese pumps derive from the TBH series with an additionalcentrifugal stage at the suction side.Pumps TBA have extremely low NPSH requirements and areparticularly suitable for handling boiling liquids and difficultapplications.This design is especially suited to handle liquids withentrained gases and liquified gases such as LPG.TBA series have performances, design and dutycharacteristics as the TBH series.Pump components are interchangeable thus reducing theneed to stock spare parts for both series.Capacities to 35 m3/h.Heads to 40 bar.
COSTRUZIONE / CONSTRUCTIONLe pompe autoadescanti serie TBH e TBA sono costituite da una girante di tipostellare autobilanciata la quale è racchiusa tra un disco aspirante ed un discopremente opportunamente studiati sul principio dei canali laterali.Si possono montare in serie vari stadi in modo da ottenere a pari portata unaumento proporzionale della prevalenza.Per il trasporto di liquidi corrosivi, tossici, inquinanti e maleodoranti ed in tutti icasi nei quali non ci debba essere alcuna perdita verso l’esterno, sonodisponibili anche le pompe serie TBK e TBAK a trascinamento magneticoricavate dalle pompe serie TBH e TBA.The self-priming pumps series TBH and TBA utilize the lateral channelprinciple. The open “star” type impeller is hydraulically balanced and enclosedbetween the suction and discharge port plates to form the pumping stage.Stages are mounted in series to give proportional higher discharge pressureswith constant capacities.The magnetic drive pumps series TBK and TBAK derive from the series TBHand TBA. They are suitable to handle hazardous, toxics, odorous or pollutingliquids and other applications where zero liquid leakage is desired.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREELETTRICO.Pump series TBHCLOSE-COUPLED to ELECTRIC MOTOR.
Pompa serie TBHEsecuzione ad ASSE NUDO.Pump series TBHBARESHAFT construction.
Pompa serie TBHEsecuzione ACCOPPIATA (BASE-GIUNTO).Pump series TBH directCOUPLED and base mounted.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 3
Scatola cuscinetto e tenuta meccanicaBearing and mechanical seal housing
Tipo di tenuta sull’albero(v. pag. 16 e 17)Type of shaft seal (see pag. 16 & 17)
Tipo di costruzioneType of construction
Grandezza della pompaPump size
Numero di stadiNumber of stages
Modifica progetto idraulicoModification of hydraulics
Pompe autoadescanticentrifughe multistadio
Self-priming multistagecentrifugal pumps
174
CODICI, MATERIALI E LIMITICODES, MATERIALS AND LIMITS
DISEGNI IN SEZIONE TIPICITYPICAL CROSS SECTION
Costruzione POMPETRAVAINIPOMPETRAVAINI construction
Esecuzioni specialiSpecial constructions
Costruzione monobloccocon lanterna (su richiesta)Close coupled constructionwith lantern (on request)
Materiali di costruzione (v. tab.)Materials of construction (see table)
Modifica progetto costruttivoConstruction modifications
ESEMPIO CODICE IDENTIFICAZIONE POMPA / EXAMPLE OF MODEL DESIGNATION
T B H 40 3 A / 1 - C / A3 - M / T - V - Z
LIMITI DI PRESSIONE E TEMPERATURA / PRESSURE AND TEMPERATURE LIMITS
40
-10
35
30
250 40 80 120 160
TEMPERATURA LIQUIDO POMPATOPUMPED LIQUID TEMPERATURE �C
Il valore di pressione massimo indicato è lasomma della pressione di aspirazione e dellaprevalenza a portata nulla.I limiti indicati non sono validi per l’esecuzio-ne B2.
The given values for maximum pressure isthe sum of the suction pressure and thepump head at shut-off point.These limits are not valid for B2 construc-tion.
VDMA N° DescrizioneDescription
106
Corpo prementeDischarge casing
Elemento e diffusorePort plate and diffuser
AlberoShaft
CollettoreManifold
GiranteImpeller
Boccola elementoElement bushing
MATERIALI DI COSTRUZIONE STANDARD / STANDARD MATERIALS OF CONSTRUCTION
GH RA A3 B2 GP
107
109114149
210
147
230
310.1
357
Corpo aspiranteSuction casing Ghisa sferoidale
Ductile iron
GhisaCast iron
Acciaio inox AISI 420Stainless steel AISI 420
AcciaioCarbon steel
OttoneBrass
—
GhisaCast iron
CarbografiteCarbon — Bronzo
Bronze
OttoneBrass
BronzoBronze
AcciaioCarbon steel
Acciaio inox AISI 420Stainless steel AISI 420
GhisaCast iron
Ghisa sferoidaleDuctile ironBronzo
Bronze
Acciaio inox AISI 316 ASTM-CF8MStainless steel AISI 316 ASTM-CF8M
MATERIALI SPECIALI SU RICHIESTA - Tabella indicativa: per informazioni più dettagliate consultare il ns. Ufficio CommercialeSPECIAL MATERIALS ARE AVAILABLE UPON REQUEST - For further information please consult our Sales Office
Particolare pompa serie TBH con bronzina corpoe boccola elemento (costruzione …/R/GP).Detail of pump series TBH with sleeve bearing and element bushing (design …/R/GP).
COMPONENTI PRINCIPALIVDMAN° DENOMINAZIONE
106 Corpo aspirante107 Corpo premente109 Elemento aspirante114 Elemento premente149 Diffusore210 Albero230 Girante stellare230.2 Girante centrifuga310 Bronzina corpo310.1 Boccola elemento320 Cuscinetto a sfere355 Supporto bronzina357 Scatola cuscinetto e tenuta mecc.421 Anello di tenuta433… Tenuta meccanica542 Boccola tenuta (solo per esec. A3)925 Dado bloccaggio girante
MAIN COMPONENTS
DESIGNATION
Suction casingDischarge casingSuction elementDischarge elementDiffuserShaftOpen “star” impellerCentrifugal impellerSleeve bearingElement bushBall bearingSleeve bearing housingBearing and mech. seal housingRadial seal ringMechanical sealSeal insert (A3 construction only)Impeller locking nut
Solo costruzione A3A3 construction only
Esecuzione con tenute meccaniche doppie contrapposte(costruzione …/CC…/T oppure …/RR…/T).Double mechanical seals construction, back to back(design …/CC…/T or …/RR…/T).
Esecuzione con tenute meccaniche doppie in serie(costruzione …/C2…/T oppure …/R2…/T).Double mechanical seals construction, tandem(design …/C2…/T or …/R2…/T).
ESECUZIONE CON CAMERE DI RAFFREDDAMENTO O RISCALDAMENTOCONSTRUCTION WITH COOLING OR HEATING CHAMBERS
Cooling or heating the seals area with liquidfrom an external source.
External mechanical seals flushing with liquidfrom an external source.
Pumping fluid.
Liquido di raffreddamento o di riscaldamentonella zona delle tenute (dall’esterno).
Liquido di lubrificazione alle tenuteesterne (dall’esterno).
Liquido di pompaggio.
Lato
com
ando
Driv
e en
dLa
to o
ppos
to c
oman
doN
on-d
rive
end
Lato
com
ando
Driv
e en
dLa
to o
ppos
to c
oman
doN
on-d
rive
end
PRES
SIO
NE
MAX
FIN
ALE
MAX
DIS
CH
ARG
E PR
ESSU
RE
bar
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 4
516
DISEGNI IN SEZIONE TIPICITYPICAL CROSS SECTION
CAMPI DI SCELTA A 1450 GIRI/1’PERFORMANCE RANGE AT 1450 RPM
Pompa serie TBH con 2 tenute meccaniche semplici (costruzione …/C).Pump series TBH with 2 single mechanical seals (design …/C).
Pompa serie TBA con tenuta meccanica semplice (costruzione …/R).Pump series TBA with single mechanical seal (design …/R).
TBHSERIESERIES
400
Hm
Q l/1'
Q m3/h
300
200
10080
60
40
30
20
10
0 10 20 30 40 70 100 200 300 400 700 1000
8060403020108643210
TBH 200
TBH 290
TBH 300
TBH 310
TBH 400 TBH 500
TBH 650
TBH 1000
TBASERIESERIES
400
Hm
300
200
10080
60
40
30
20
10
0 10 20 30 40 70 100 200 300 400 600
403020108643210
TBA 290
TBA 300
TBA 310
TBA 400
TBA 500
TBA 650
Q l/1'
Q m3/h
Dati indicativi riferiti adacqua a temperaturaambiente.Per le curve difunzionamentospecifiche contattare la POMPETRAVAINI.Information is forwater at roomtemperature. Forspecific performancecurves contactPOMPETRAVAINI.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 5
N. ForiHoles Q.ty
4
4
4
8
8
8
156
DATI DI FUNZIONAMENTO A 1450 GIRI/1’PERFORMANCE DATA AT 1450 RPM
SERIESERIES TBH SERIE
SERIES TBA
BOCCHEFLANGES
Ø 20
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
H25507598123148173198
kWQ
mNPSH
50,3
2
0,50,91,31,72,12,52,93,3
H22456788
111133155178
kW100,6
2
0,50,81,21,61,92,32,73
H2040607998
117137156
kW150,9
2
0,40,81,11,41,82,12,42,8
H163045587386
100114
kW251,5
2,2
0,40,60,91,21,41,72
2,3
H915232935404550
kW402,4
3,1
0,30,50,60,80,91,11,31,5
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 291TBH 292TBH 293TBH 294TBH 295TBH 296TBH 297TBH 298
Q
mNPSH
H3468
102136170202238270
kW100,6
1
0,71,32
2,73,44,24,85,5
H316295
125158185220252
kW150,9
1
0,61,21,92,53,33,94,65,3
H275580
108135160186215
kW251,5
1,1
0,61,21,82,33
3,64,24,8
H2040597898118137158
kW402,4
1,2
0,51
1,52
2,53,13,64,2
H1020304050607080
kW603,6
1,5
0,40,81,21,61,92,42,83,3
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 301TBH 302TBH 303TBH 304TBH 305TBH 306TBH 307TBH 308
Q
mNPSH
H4080
120158198236270305
kW150,9
1,1
123
4,15
5,96,87,7
H3670
104139174206236268
kW251,5
1,1
0,91,82,73,74,55,36,27
H265582108136162185210
kW H kW H kW402,4
1,2
0,81,52,33,13,84,55,25,9
1835527086102118132
603,6
1,5
0,51,11,72,32,83,33,94,5
815223038455057
804,8
2,2
0,40,81,11,51,82,22,63
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 311TBH 312TBH 313TBH 314TBH 315TBH 316TBH 317TBH 318
Q
mNPSH
H kW H kW H kW H kW255078104129153180205
603,6
1,6
0,91,82,83,84,75,76,67,5
2038597998117136155
804,8
1,7
0,81,52,33,13,84,65,36,1
14274054688094103
1006
2,2
0,51,21,82,43
3,54,14,6
612182530354044
1257,5
3
0,30,81,11,51,82,22,52,8
BOCCHEFLANGES
Ø 40
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408
H3675110145182220259294
kWQ
mNPSH
1006
2
24,16,18,1
10,212,314,416,4
H306090
120152181212241
kW1257,5
2,1
1,73,65,47,29
10,812,614,4
H22487295
120142166190
kW1509
2,5
1,53
4,66,17,79,2
10,912,4
H1734517086
104121140
kW17510,5
3
1,12,63,85,16,47,89,110,4
H1021324455667688
kW20012
3,7
0,923
4,25,26,37,48,4
BOCCHEFLANGES
Ø 50
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508
Q
mNPSH
H4078
116151190226263300
kW17510,5
2,4
4,48,212
15,819,623,226,830,5
H3870104140174206240276
kW H kW H kW H kW20012
2,5
47,611
14,618
21,525
25,4
295681110138164194220
25015
2,9
3,56,49,512,415,218,12124
2040597896117136155
30018
3,4
35,47,810
12,414,817
19,5
1224344557687990
33420
4
2,54,268
9,811,513,215
BOCCHEFLANGES
Ø 65
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Q
mNPSH
H kW H kW H kW H kW H kW H kW4285128170214255298340
26716
3
814,521,528,535
41,548,555
4080120160200240280320
30018
3
71420273339
45,552
3670104140178213248282
35021
3,1
6,512,5182430364248
306088120150180210240
40024
3,4
61116
21,52732
37,543
2038557490110127144
50030
4,4
58,5121620
23,527,531,5
514233442505965
58435
5,6
479
12,515
17,520,523
BOCCHEFLANGESIN = Ø 100OUT = Ø 80
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 1001TBH 1002TBH 1003
Q
mNPSH
H4385128
kW53432
3
162943
H4181120
kW60036
3
142740
H3771106
kW70042
3,1
122436
H306090
kW80048
3,4
1121,532,5
H183654
kW100060
4,4
917,525
H5
1422
kW116770
5,6
81419
MOTORE ELETTRICO Electric Motor
041041041
041041034034034
907041041034034034
185240262
200220185265333
165210245270310352
310310310
330330330330330
280330330310310310
168173178
165175200210220
150180195225240255
034034034034
041041034034034034
130215295333
215265270310352352
355355355355
330330330330330330
195205215225
184199230245260275
034034034034034034
85145270310352352
355355355355355355
190220235250365280
039039039
100200287
385385385
287302317
039039039
100270287
415415415
290305320
N° A H PesoWeight
180M / 180L
N° A H PesoWeight
200L
N° A H PesoWeight
225S / 225M
N° A H PesoWeight
250M
N° A H PesoWeight
280S / 280M
d
v
z
D
R
DNA
K
DNM
DNA - DNM
32
40
50
65
80
100
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
140
150
165
185
200
235
100
110
125
145
160
190
18
18
18
18
18
22
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
200L
225S
225M
250M
280S
280M
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
90
MOTORI ELETTRICIELECTRIC MOTOR
BASAMENTI / BASEPLATES
B C E F L G S Ø ON° foriHoles
N°
900
901
902
903
906
907
034
039
041
960
770
610
1170
1400
1200
1700
2150
1350
310
290
210
350
350
420
450
540
420
600
420
370
770
950
900
1100
1600
900
180
175
120
200
225
150
300
275
225
370
350
270
410
410
510
590
680
560
340
320
240
380
380
470
540
630
510
5
5
5
6
6
6
7
7
7
14
14
14
14
14
18
18
18
18
4
4
4
4
4
4
4
6
4
d v z
M12
M16
240
350
45
60
BULLONI DI FONDAZIONE (A RICHIESTA)FOUNDATION BOLTS (OPTIONAL)
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 6
714
DATI DI FUNZIONAMENTO A 1450 GIRI/1’PERFORMANCE DATA AT 1450 RPM
SERIESERIES TBADIMENSIONI D’INGOMBRO
OVERALL DIMENSIONS
Versione ACCOPPIATA(BASE-GIUNTO)
COUPLED construction(BASEPLATE - COUPLING)
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
I dati in tabella sono riferiti ad acqua a temperatura ambiente: la portata (Q) e la prevalenza (H) sono soggette ad una tolleranza del 5%, la potenza assorbita ad unatolleranza del 10%. Tutte le pompe in esecuzione Acciaio inox (A3) sono soggette ad una diminuzione di prevalenza (H) del 10%.NPSH� = Battente netto richiesto per liquidi in condizione di ebollizione.This data refers to water at room temperature: capacity (Q) and head (H) subject to 5% tolerance, absorbed power subject to 10% tolerance.All Stainless steel (A3) pumps have 10% less head (H).NPSH� = Minimum positive head required for liquids in boiling conditions.
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 291TBA 292TBA 293TBA 294TBA 925TBA 296TBA 297TBA 298
3872
104140175108241276
Q
mNPSH
100,6
0,9
0,91,42,22,83,64,35
5,7
356598
130162194225256
150,9
0,9
0,81,42,12,73,44,14,75,5
305884
112140165191218
251,5
0,95
0,81,32
2,53,23,74,45,1
24436282
102121141160
402,4
1
0,71,21,72,22,73,33,84,4
1525354555657585
H kWH kWH kWH kWH kW603,6
1,1
0,61
1,41,82,12,63
3,5
mNPSH � 0,14 0,14 0,14 0,14 0,14
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 301TBA 302TBA 303TBA 304TBA 305TBA 306TBA 307TBA 308
Q
mNPSH
4482
122162201240276310
150,9
0,9
1,32,33,24,35,26,17
7,9
4075
108144176210241274
251,5
0,95
1,22,12,93,84,75,56,37,2
326083
114140168190216
402,4
1,1
11,72,53,34
4,75,46,1
2140567490
108124139
H kWH kWH kWH kWH kW603,6
1,2
0,81,31,92,53,13,54,14,6
1220253542505562
804,8
1,3
0,61
1,31,72,12,42,73,2
mNPSH � 0,16 0,16 0,16 0,16 0,17
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 311TBA 312TBA 313TBA 314TBA 315TBA 316TBA 317TBA 318
Q
mNPSH
295481
108132156181205
H kWH kW H kW H kW603,6
0,9
1,22,13,14,15
5,86,77,7
23426382
102120140158
804,8
0,95
11,72,53,34,14,85,56,3
18304459728598
110
1006
1,1
0,81,42
2,63,23,74,34,9
1015222834404652
1257,5
1,4
0,61
1,41,72,12,42,73,2
mNPSH � 0,16 0,17 0,18 0,20
BOCCHEFLANGESIN = Ø 80
OUT = Ø 40
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408
4179
118152188225262300
Q
mNPSH
1006
0,85
2,44,46,58,6
10,612,614,716,6
356296
125158186218247
1257,5
0,9
23,85,77,69,4
12,113
14,7
275075
100124148170195
1509
0,95
1,73,24,96,58,19,6
11,212,9
2036557290
108125142
17510,5
1,05
1,42,94,25,56,98,29,4
10,8
1222354658697990
H kWH kWH kWH kWH kW20012
1,15
1,22,53,54,55,66,77,78,7
mNPSH � 0,22 0,24 0,28 0,35 0,45
BOCCHEFLANGESIN = Ø 100OUT = Ø 50
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508
Q
mNPSH
4584
120158197230270305
17510,5
0,95
58,8
12,516,120
23,827,331
4177
110145178210245280
H kWH kWH kW H kW H kW20012
1
4,78
11,615
18,522
25,529
326086
115140166195224
25015
1,1
47
1012,915,818,621,524,5
2242607998
116135155
30018
1,25
3,55,98
10,512,815
17,419,8
1626384960708192
33420
1,35
34,86,58,4
10,112
13,915,6
mNPSH � 0,35 0,4 0,45 0,55 0,65
BOCCHEFLANGESIN = Ø 100OUT = Ø 65
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Q
mNPSH
H kW H kW H kW H kW H kW H kW5294
136179221264305349
26716
1,3
8,515,5222936
42,54956
5089
129169207248286327
30018
1,3
7,814,52127
33,54046
52,5
4379
114150183219252289
35021
1,3
7,513,51925303642
47,5
396596
126156185216245
40024
1,35
71217
22,527,532,537,542,5
2442607995
114130150
50030
1,5
5,59,5
13,517,5212528
32,5
917263542526069
58435
1,65mNPSH � 0,36 0,38 0,43 0,5 0,68 0,85
4,87,51013
12,518,52124
Pompa tipoPump model
DNA DNM M h2 P N° A H PesoWeight N° A H Peso
Weight N° A H PesoWeight N° A H Peso
Weight
MOTORE ELETTRICO Electric Motor
DIMENSIONI Dimensions 80M 90S / 90L 100L 112M
65656565656565658080808080808080
100100100100100100100100100100100100100100100100
3232323232323232404040404040404050505050505050506565656565656565
228268308348388428468508268323378433488543598653305380455530605680755830338428518608698788878968
132132132132132132132132140140140140140140140140165165165165165165165165180180180180180180180180
113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
902 10 16 4 902901901
901901900
901
155175175
205220150
180
162172172
192192197
220
445862
606597
90
901901901901900900
901900900900
901900
900
175175190210180180
220150180205
180223
130
172172172172177177
192197197197
220225
245
475559607074
779297
102
87114
134
901901901901900900900900901900900900900
901900900
900900
175175190210180180180180220150180205205
180140185
135180
172172172172177177177177192197197197197
225225225
245245
475256586872778178899499
104
85112122
132147
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
N° A H PesoWeight
132S / 132M
900900900900900900900
900900900903903903906900900900903903906
900900903903906
180180180180180200235
180200225175175195175140180215170205155
175220180227182
197197197197197197197
197197197222222222232225225225250250260
245245270270280
63697376808387
808590
110115120135102112122160170198
113128162177202
N° A H PesoWeight
160M / 160L
903903903903903
903903903903906906903903903903906906906034903903903903906
200200200200200
180210210245170240115155190228175215250333115155190228175
250250250250250
250250250250260260250250250250260260260290270270270270280
9498101105108
120125130135155160127137147157185195200215127142157172197
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 7
138
DIMENSIONI D’INGOMBROOVERALL DIMENSIONS
SERIESERIES TBA
Pompa tipoPump model
DNA DNM M B h1 h2 E f f1 f2 W b c1 m n1 n2 s1 d1 l t u PesoWeight
Versione ad ASSE NUDOBARESHAFT construction
20202020202020203232323232323232404040404040404050505050505050506565656565656565
20202020202020203232323232323232404040404040404050505050505050506565656565656565
108142176210244278312346144184224264304344384424152207262317372427482537171246321396471546621696190280370460550640730820
158192226260294328362396204244284324364404444484228283338393448503558613251326401476551626701776270360450540630720810900
100100100100100100100100112112112112112112112112132132132132132132132132160160160160160160160160180180180180180180180180
100100100100100100100100135135135135135135135135140140140140140140140140165165165165165165165165180180180180180180180180
182216250284318352386420228268308348388428468508252307362417472527582637281356431506581656731806300390480570660750840930
108,5108,5108,5108,5108,5108,5108,5108,5113113113113113113113113151151151151151151151151151151151151151151151151184184184184184184184184
71717171717171717070707070707070979797 9797979797979797 9797979797
117117117117117117117117
81818181818181817676767676767676
102102102102102102102102102102102102102102102102120120120120120120120120
71,571,571,571,571,571,571,571,57171717171717171
1011011011011011011011019696969696969696
129129129129129129129129
353535 3535353535353535353535 3535404040404040404045454545454545455050505050505050
11111111111111111212121212121212131313131313131315151515151515151616161616161616
40404040404040404545454545454545505050505050505055555555555555555555555555555555
140140140140140140140140170170170170170170170170195195195195195195195195215215215215215215215215245245245245245245245245
105105105105105105105105135135135135135135135135155155155155155155155155170170170170170170170170195195195195195195195195
12121212121212121212121212121212121212121212121214141414141414141414141414141414
14141414141414141919191919191919242424242424242424242424242424242828282828282828
35353535353535354040404040404040454545454545454545454545454545456565656565656565
1616161616161616
21,521,521,521,521,521,521,521,5272727272727272727272727272727273131313131313131
5555555566666666888888888888888888888888
14,516
17,519
20,522
23,525
22,526
29,533
36,540
43,547303540455055606539495969798999
10952678297
112127142157
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
Versione ad ASSE NUDOBARESHAFT construction
N. ForiHoles Q.ty
4
4
4
4
8
D
R
DNA
K
DNM
DNA - DNM
20
32
40
50
65
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
105
140
150
165
185
75
100
110
125
145
14
18
18
18
18
VersioneMONOBLOCCO /M
CLOSE - COUPLED /Mconstruction
P167167
102102
112112
28,532
192192192192192192192192
226,5226,5226,5
228
102102102102102102102102147147147
147
2020202020202020———
—
132132132132132132132132132132132
160
34,538
41,545
48,552
55,559455055
60
197197197197197197197197248248248248248248
249,5249,5
268
102102102102102102102102176176176176176176
171171
189
4040404040404040202020202020
——
—
152152152152152152152152152152152152152152
160160
180
37,541
44,548
51,555
58,562475257626772
6272
84
277277277277277277277277
278,5278,5278,5278,5278,5278,5278,5278,5297297297
176176176176176176176176192192192192192192192192212212212
68686868686868684040404040404040202020
596469747984899474849410411412413414496111126
G1 H PesoWeight P G1 h3 H Peso
Weight P G1 h3 H PesoWeight P G2 h4 Peso
Weight
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Versione MONOBLOCCO CLOSE-COUPLED construction
80-90 100-112 132Pompa tipoPump model
160-180motoremotor
motoremotor
motoremotor
motoremotor
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
MOTORI ELETTRICIELECTRIC MOTOR
(h3) (h4) Spessori per allineamento motore - pompa esclusi dalla fornituraRaising pads for motor - pump alignment are not supplied by pompetravaini
Per pompe serie TBA 400con motori grandezza 132For pump series TBA 400with motor frame 132
= 90
Per pompe serie TBA 400con motori grandezza 132For pump series TBA 400with motor frame 132
= 120
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 8
912
SERIESERIES TBHDIMENSIONI D’INGOMBRO
OVERALL DIMENSIONS
P166166166166166166
165165165
110110110110110110
999999
100100100100100100
112112112
1920,522
23,525
26,5
2730,534
191191191191191191191190190190190190190190190
226,5226,5226,5226,5226,5226,5
227,5227,5227,5
1051051051051051051059999999999999999147147147147147147
147147147
252525252525252020202020202020——————
———
125125125125125125125132132132132132132132132132132132132132132
160160160
26,528
29,531
32,534
35,533
36,540
43,547
50,554
57,5384348535863
495969
195195195195195195
248248248248248248248249249249249249249
267
999999999999
176176176176176176176172172172172172172
189
404040404040
20202020202020——————
—
152152152152152152
152152152152152152152160160160160160160
180
4346,550
53,557
60,5
455055606570755161718191101
71
277277277277277
278278278278278278278296296296
194194194194194
194194194194194194194211211211
6868686868
40404040404040202020
6772778287
7383931031131231338398113
G1 H PesoWeight P G1 h3 H Peso
Weight P G1 h3 H PesoWeight P G2 h4 Peso
Weight
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Versione MONOBLOCCO CLOSE-COUPLED construction
80-90 100-112 132Pompa tipoPump model
160-180motoremotor
motoremotor
motoremotor
motoremotor
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufactu-re
(h3) (h4) Spessori per allineamento motore - pompa esclusi dalla fornituraRaising pads for motor - pump alignment are not supplied by pompetravaini
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
MOTORI ELETTRICIELECTRIC MOTOR
VersioneMONOBLOCCO /M
CLOSE - COUPLED /Mconstruction
Per pompe serie TBH 200con motori grandezza 80-90e pompe serie TBH 400con motori grandezza 132For pump series TBH 200with motor frames 80-90and pump series TBH 400with motor frame 132
= 90
Per pompe serie TBH 200con motori grandezza 80-90e pompe serie TBH 400con motori grandezza 132For pump series TBH 200with motor frames 80-90and pump series TBH 400with motor frame 132
= 120
Per le dimensioni delleesecuzioni VERTICALI e perle pompe serie TBH 1000,contattare laPOMPETRAVAINI.For dimensions for theVERTICAL constructionand for pump seriesTBH 1000, contactPOMPETRAVAINI.
Pompa tipoPump model
DNA DNM M B h1 h2 E f W b c1 m n1 n2 s1 d1 l t u PesoWeight
Versione ad ASSE NUDOBARESHAFT construction
65656565656565658080808080808080
100100100100100100100100100100100100100100100100
3232323232323232404040404040404050505050505050506565656565656565
228268308348388428468508268323378433488543598653305380455530605680755830338428518608698788878968
209249289329369409449489247302357412467522577632287362437512587662737812311401491581671761851941
112112112112112112112112132132132132132132132132160160160160160160160160180180180180180180180180
135135135135135135135135140140140140140140140140165165165165165165165165180180180180180180180180
233273313353393433473513271326381436491546601656317392467542617692767842341431521611701791881971
113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
7171717171717171
1011011011011011011011019898989898989898
129129129129129129129129
3535353535353535404040404040404045454545454545455050505050505050
1212121212121212131313131313131315151515151515151616161616161616
4545454545454545505050505050505055555555555555555555555555555555
170170170170170170170170195195195195195195195195215215215215215215215215245245245245245245245245
135135135135135135135135155155155155155155155155170170170170170170170170195195195195195195195195
1212121212121212121212121212121214141414141414141414141414141414
1919191919191919242424242424242424242424242424242828282828282828
4040404040404040454545454545454545454545454545456565656565656565
21,521,521,521,521,521,521,521,5272727272727272727272727272727273131313131313131
66666666888888888888888888888888
2427,531
34,538
41,545
48,537424752576267725060708090
100110120658095
110125140155170
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
N. ForiHoles Q.ty
4
4
4
8
8
8
D
R
DNA
K
DNM
DNA - DNM
32
40
50
65
80
100
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
140
150
165
185
200
235
100
110
125
145
160
190
18
18
18
18
18
22
Versione ad ASSE NUDOBARESHAFT construction
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 9
N°
1110
DIMENSIONI D’INGOMBROOVERALL DIMENSIONS
SERIESERIES TBH
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
Versione ACCOPPIATA(BASE-GIUNTO)
COUPLED construction(BASEPLATE - COUPLING)
Pompa tipoPump model
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
DNA DNM M h2 P N° A H PesoWeight N° A H Peso
Weight N° A H PesoWeight N° A H Peso
Weight
MOTORE ELETTRICO Electric Motor
DIMENSIONI Dimensions 80M 90S / 90L 100L 112M
20202020202020203232323232323232404040404040404050505050505050506565656565656565
20202020202020203232323232323232404040404040404050505050505050506565656565656565
108142176210244278312346144184224264304344384424152207262317372427482537171246321396471546621696190280370460550640730820
100100100100100100100100132132132132132132132132140140140140140140140140165165165165165165165165180180180180180180180180
109109109109109109109109113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
902902902
902902
902
355065
5070
70
150150150
162162
182
323435
4043
48
902902902901901901901
902901901901901
901901900
901
60758090
105125120
7580
100120133
8010520
85
150150150160160160160
162172172172172
192192197
220
31323435363840
4250525558
556072
67
902901901901901901900902901901901900900900
901901900900900
901900
901
8080
1001151351306078
1001201336080
100
1001255580
110
10545
120
150160160160160160165162172172172177177177
192192197197197
220225
240
3234353738394840475053656871
5560727782
6784
81
901901901901900
901901901900900900900
901900900900900
901900900
900900
10011513513560
8510512545658590
1255580
110130
1054580
3080
172172172172177
172172172177177177177
192197197197197
220225225
245245
3739404250
45485163666973
5870758087
658293
86104
N° A H PesoWeight
132S / 132M
900900900
900900900900900903
900900900903903903903900900900903903903
900900903903906
8095
110
5080
10012013560
5085
1105080
1001305090
12080
120140
7512080
125120
197197197
197197197197197222
197197197222222222222225225225250250250
245245270270280
525456
616467707498
62677277
103108113768696
126136146
92107142157191
N° A H PesoWeight
160M / 160L
903903903903903
903903903903907906
903903903906906906
903903903906906
507090
120130
60100130150100105
6010013570
120145
55100145100145
250250250250250
250250250250260260
250250250260260260
270270270280280
9497101104107
95100105110126131
104114124155165175
118133148184199
MOTORE ELETTRICO Electric Motor
907907041041
907907041041034034
907907041034
6590125150
5075130170115195
457013075
280280310310
280280310310310310
280280310310
152157190195
152162172182234244
150165187200
907041034034034
907041034
9016560115195
95165100
300330330330330
300330330
175184212222232
184199232
034034034034
034034034034034
1060145195
050135160230
355355355355
355355355355355
215225235245
207222237252267
034042039039
16514550140
380380385385
240280295310
039039039
2090160
415415415
285300315
N° A H PesoWeight
180M / 180L
N° A H PesoWeight
200L
N° A H PesoWeight
225S / 225M
N° A H PesoWeight
250M
N° A H PesoWeight
280S / 280M
N. ForiHoles Q.ty
4
4
4
4
8
d
v
z
D
R
DNA
K
DNM
DNA - DNM
20
32
40
50
65
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
105
140
150
165
185
75
100
110
125
145
14
18
18
18
18
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
200L
225S
225M
250M
280S
280M
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
90
MOTORI ELETTRICIELECTRIC MOTOR
BASAMENTI / BASEPLATES
B C E F L G S Ø ON° foriHoles
960
770
610
1170
1400
1200
1700
2150
1350
1800
310
290
210
350
350
420
450
540
420
500
600
420
370
770
950
900
1100
1600
900
1400
180
175
120
200
225
150
300
275
225
200
370
350
270
410
410
510
590
680
560
640
340
320
240
380
380
470
540
630
510
590
5
5
5
6
6
6
7
7
7
7
14
14
14
14
14
18
18
18
18
18
4
4
4
4
4
4
4
6
4
6
d v z
M12
M16
240
350
45
60
BULLONI DI FONDAZIONE (A RICHIESTA)FOUNDATION BOLTS (OPTIONAL)
Per le dimensioni delle pompe TBH 1000, contattare la POMPETRAVAINI.For dimensions of pump series TBH 1000, contact POMPETRAVAINI
900
901
902
903
906
907
034
039
041
042
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:23 Pagina 10
N°
1110
DIMENSIONI D’INGOMBROOVERALL DIMENSIONS
SERIESERIES TBH
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
Versione ACCOPPIATA(BASE-GIUNTO)
COUPLED construction(BASEPLATE - COUPLING)
Pompa tipoPump model
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
DNA DNM M h2 P N° A H PesoWeight N° A H Peso
Weight N° A H PesoWeight N° A H Peso
Weight
MOTORE ELETTRICO Electric Motor
DIMENSIONI Dimensions 80M 90S / 90L 100L 112M
20202020202020203232323232323232404040404040404050505050505050506565656565656565
20202020202020203232323232323232404040404040404050505050505050506565656565656565
108142176210244278312346144184224264304344384424152207262317372427482537171246321396471546621696190280370460550640730820
100100100100100100100100132132132132132132132132140140140140140140140140165165165165165165165165180180180180180180180180
109109109109109109109109113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
902902902
902902
902
355065
5070
70
150150150
162162
182
323435
4043
48
902902902901901901901
902901901901901
901901900
901
60758090
105125120
7580
100120133
8010520
85
150150150160160160160
162172172172172
192192197
220
31323435363840
4250525558
556072
67
902901901901901901900902901901901900900900
901901900900900
901900
901
8080
1001151351306078
1001201336080
100
1001255580
110
10545
120
150160160160160160165162172172172177177177
192192197197197
220225
240
3234353738394840475053656871
5560727782
6784
81
901901901901900
901901901900900900900
901900900900900
901900900
900900
10011513513560
8510512545658590
1255580
110130
1054580
3080
172172172172177
172172172177177177177
192197197197197
220225225
245245
3739404250
45485163666973
5870758087
658293
86104
N° A H PesoWeight
132S / 132M
900900900
900900900900900903
900900900903903903903900900900903903903
900900903903906
8095
110
5080
10012013560
5085
1105080
1001305090
12080
120140
7512080
125120
197197197
197197197197197222
197197197222222222222225225225250250250
245245270270280
525456
616467707498
62677277
103108113768696
126136146
92107142157191
N° A H PesoWeight
160M / 160L
903903903903903
903903903903907906
903903903906906906
903903903906906
507090
120130
60100130150100105
6010013570
120145
55100145100145
250250250250250
250250250250260260
250250250260260260
270270270280280
9497101104107
95100105110126131
104114124155165175
118133148184199
MOTORE ELETTRICO Electric Motor
907907041041
907907041041034034
907907041034
6590125150
5075130170115195
457013075
280280310310
280280310310310310
280280310310
152157190195
152162172182234244
150165187200
907041034034034
907041034
9016560115195
95165100
300330330330330
300330330
175184212222232
184199232
034034034034
034034034034034
1060145195
050135160230
355355355355
355355355355355
215225235245
207222237252267
034042039039
16514550140
380380385385
240280295310
039039039
2090160
415415415
285300315
N° A H PesoWeight
180M / 180L
N° A H PesoWeight
200L
N° A H PesoWeight
225S / 225M
N° A H PesoWeight
250M
N° A H PesoWeight
280S / 280M
N. ForiHoles Q.ty
4
4
4
4
8
d
v
z
D
R
DNA
K
DNM
DNA - DNM
20
32
40
50
65
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
105
140
150
165
185
75
100
110
125
145
14
18
18
18
18
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
200L
225S
225M
250M
280S
280M
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
90
MOTORI ELETTRICIELECTRIC MOTOR
BASAMENTI / BASEPLATES
B C E F L G S Ø ON° foriHoles
960
770
610
1170
1400
1200
1700
2150
1350
1800
310
290
210
350
350
420
450
540
420
500
600
420
370
770
950
900
1100
1600
900
1400
180
175
120
200
225
150
300
275
225
200
370
350
270
410
410
510
590
680
560
640
340
320
240
380
380
470
540
630
510
590
5
5
5
6
6
6
7
7
7
7
14
14
14
14
14
18
18
18
18
18
4
4
4
4
4
4
4
6
4
6
d v z
M12
M16
240
350
45
60
BULLONI DI FONDAZIONE (A RICHIESTA)FOUNDATION BOLTS (OPTIONAL)
Per le dimensioni delle pompe TBH 1000, contattare la POMPETRAVAINI.For dimensions of pump series TBH 1000, contact POMPETRAVAINI
900
901
902
903
906
907
034
039
041
042
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:23 Pagina 10
912
SERIESERIES TBHDIMENSIONI D’INGOMBRO
OVERALL DIMENSIONS
P166166166166166166
165165165
110110110110110110
999999
100100100100100100
112112112
1920,522
23,525
26,5
2730,534
191191191191191191191190190190190190190190190
226,5226,5226,5226,5226,5226,5
227,5227,5227,5
1051051051051051051059999999999999999147147147147147147
147147147
252525252525252020202020202020——————
———
125125125125125125125132132132132132132132132132132132132132132
160160160
26,528
29,531
32,534
35,533
36,540
43,547
50,554
57,5384348535863
495969
195195195195195195
248248248248248248248249249249249249249
267
999999999999
176176176176176176176172172172172172172
189
404040404040
20202020202020——————
—
152152152152152152
152152152152152152152160160160160160160
180
4346,550
53,557
60,5
455055606570755161718191101
71
277277277277277
278278278278278278278296296296
194194194194194
194194194194194194194211211211
6868686868
40404040404040202020
6772778287
7383931031131231338398113
G1 H PesoWeight P G1 h3 H Peso
Weight P G1 h3 H PesoWeight P G2 h4 Peso
Weight
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Versione MONOBLOCCO CLOSE-COUPLED construction
80-90 100-112 132Pompa tipoPump model
160-180motoremotor
motoremotor
motoremotor
motoremotor
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufactu-re
(h3) (h4) Spessori per allineamento motore - pompa esclusi dalla fornituraRaising pads for motor - pump alignment are not supplied by pompetravaini
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
MOTORI ELETTRICIELECTRIC MOTOR
VersioneMONOBLOCCO /M
CLOSE - COUPLED /Mconstruction
Per pompe serie TBH 200con motori grandezza 80-90e pompe serie TBH 400con motori grandezza 132For pump series TBH 200with motor frames 80-90and pump series TBH 400with motor frame 132
= 90
Per pompe serie TBH 200con motori grandezza 80-90e pompe serie TBH 400con motori grandezza 132For pump series TBH 200with motor frames 80-90and pump series TBH 400with motor frame 132
= 120
Per le dimensioni delleesecuzioni VERTICALI e perle pompe serie TBH 1000,contattare laPOMPETRAVAINI.For dimensions for theVERTICAL constructionand for pump seriesTBH 1000, contactPOMPETRAVAINI.
Pompa tipoPump model
DNA DNM M B h1 h2 E f W b c1 m n1 n2 s1 d1 l t u PesoWeight
Versione ad ASSE NUDOBARESHAFT construction
65656565656565658080808080808080
100100100100100100100100100100100100100100100100
3232323232323232404040404040404050505050505050506565656565656565
228268308348388428468508268323378433488543598653305380455530605680755830338428518608698788878968
209249289329369409449489247302357412467522577632287362437512587662737812311401491581671761851941
112112112112112112112112132132132132132132132132160160160160160160160160180180180180180180180180
135135135135135135135135140140140140140140140140165165165165165165165165180180180180180180180180
233273313353393433473513271326381436491546601656317392467542617692767842341431521611701791881971
113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
7171717171717171
1011011011011011011011019898989898989898
129129129129129129129129
3535353535353535404040404040404045454545454545455050505050505050
1212121212121212131313131313131315151515151515151616161616161616
4545454545454545505050505050505055555555555555555555555555555555
170170170170170170170170195195195195195195195195215215215215215215215215245245245245245245245245
135135135135135135135135155155155155155155155155170170170170170170170170195195195195195195195195
1212121212121212121212121212121214141414141414141414141414141414
1919191919191919242424242424242424242424242424242828282828282828
4040404040404040454545454545454545454545454545456565656565656565
21,521,521,521,521,521,521,521,5272727272727272727272727272727273131313131313131
66666666888888888888888888888888
2427,531
34,538
41,545
48,537424752576267725060708090
100110120658095
110125140155170
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
N. ForiHoles Q.ty
4
4
4
8
8
8
D
R
DNA
K
DNM
DNA - DNM
32
40
50
65
80
100
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
140
150
165
185
200
235
100
110
125
145
160
190
18
18
18
18
18
22
Versione ad ASSE NUDOBARESHAFT construction
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 9
138
DIMENSIONI D’INGOMBROOVERALL DIMENSIONS
SERIESERIES TBA
Pompa tipoPump model
DNA DNM M B h1 h2 E f f1 f2 W b c1 m n1 n2 s1 d1 l t u PesoWeight
Versione ad ASSE NUDOBARESHAFT construction
20202020202020203232323232323232404040404040404050505050505050506565656565656565
20202020202020203232323232323232404040404040404050505050505050506565656565656565
108142176210244278312346144184224264304344384424152207262317372427482537171246321396471546621696190280370460550640730820
158192226260294328362396204244284324364404444484228283338393448503558613251326401476551626701776270360450540630720810900
100100100100100100100100112112112112112112112112132132132132132132132132160160160160160160160160180180180180180180180180
100100100100100100100100135135135135135135135135140140140140140140140140165165165165165165165165180180180180180180180180
182216250284318352386420228268308348388428468508252307362417472527582637281356431506581656731806300390480570660750840930
108,5108,5108,5108,5108,5108,5108,5108,5113113113113113113113113151151151151151151151151151151151151151151151151184184184184184184184184
71717171717171717070707070707070979797 9797979797979797 9797979797
117117117117117117117117
81818181818181817676767676767676
102102102102102102102102102102102102102102102102120120120120120120120120
71,571,571,571,571,571,571,571,57171717171717171
1011011011011011011011019696969696969696
129129129129129129129129
353535 3535353535353535353535 3535404040404040404045454545454545455050505050505050
11111111111111111212121212121212131313131313131315151515151515151616161616161616
40404040404040404545454545454545505050505050505055555555555555555555555555555555
140140140140140140140140170170170170170170170170195195195195195195195195215215215215215215215215245245245245245245245245
105105105105105105105105135135135135135135135135155155155155155155155155170170170170170170170170195195195195195195195195
12121212121212121212121212121212121212121212121214141414141414141414141414141414
14141414141414141919191919191919242424242424242424242424242424242828282828282828
35353535353535354040404040404040454545454545454545454545454545456565656565656565
1616161616161616
21,521,521,521,521,521,521,521,5272727272727272727272727272727273131313131313131
5555555566666666888888888888888888888888
14,516
17,519
20,522
23,525
22,526
29,533
36,540
43,547303540455055606539495969798999
10952678297
112127142157
TBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
TBH 291-301-311TBH 292-302-312TBH 293-303-313TBH 294-304-314TBH 295-305-315TBH 296-306-316TBH 297-307-317TBH 298-308-318
TBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408TBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508TBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
Versione ad ASSE NUDOBARESHAFT construction
N. ForiHoles Q.ty
4
4
4
4
8
D
R
DNA
K
DNM
DNA - DNM
20
32
40
50
65
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
105
140
150
165
185
75
100
110
125
145
14
18
18
18
18
VersioneMONOBLOCCO /M
CLOSE - COUPLED /Mconstruction
P167167
102102
112112
28,532
192192192192192192192192
226,5226,5226,5
228
102102102102102102102102147147147
147
2020202020202020———
—
132132132132132132132132132132132
160
34,538
41,545
48,552
55,559455055
60
197197197197197197197197248248248248248248
249,5249,5
268
102102102102102102102102176176176176176176
171171
189
4040404040404040202020202020
——
—
152152152152152152152152152152152152152152
160160
180
37,541
44,548
51,555
58,562475257626772
6272
84
277277277277277277277277
278,5278,5278,5278,5278,5278,5278,5278,5297297297
176176176176176176176176192192192192192192192192212212212
68686868686868684040404040404040202020
596469747984899474849410411412413414496111126
G1 H PesoWeight P G1 h3 H Peso
Weight P G1 h3 H PesoWeight P G2 h4 Peso
Weight
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Versione MONOBLOCCO CLOSE-COUPLED construction
80-90 100-112 132Pompa tipoPump model
160-180motoremotor
motoremotor
motoremotor
motoremotor
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
MOTORI ELETTRICIELECTRIC MOTOR
(h3) (h4) Spessori per allineamento motore - pompa esclusi dalla fornituraRaising pads for motor - pump alignment are not supplied by pompetravaini
Per pompe serie TBA 400con motori grandezza 132For pump series TBA 400with motor frame 132
= 90
Per pompe serie TBA 400con motori grandezza 132For pump series TBA 400with motor frame 132
= 120
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 8
714
DATI DI FUNZIONAMENTO A 1450 GIRI/1’PERFORMANCE DATA AT 1450 RPM
SERIESERIES TBADIMENSIONI D’INGOMBRO
OVERALL DIMENSIONS
Versione ACCOPPIATA(BASE-GIUNTO)
COUPLED construction(BASEPLATE - COUPLING)
Disegno schematico. Dimensioni con tolleranze secondo EN 735-1995. Pesi indicativi in kg. riferiti a pompe in ghisa escluso motore, non impegnativi.Schematic drawing. Dimensions in mm with tolerances to EN 735-1995 standards. Weights in kgs. referred to pump in cast iron without motor, not certified.
I dati in tabella sono riferiti ad acqua a temperatura ambiente: la portata (Q) e la prevalenza (H) sono soggette ad una tolleranza del 5%, la potenza assorbita ad unatolleranza del 10%. Tutte le pompe in esecuzione Acciaio inox (A3) sono soggette ad una diminuzione di prevalenza (H) del 10%.NPSH� = Battente netto richiesto per liquidi in condizione di ebollizione.This data refers to water at room temperature: capacity (Q) and head (H) subject to 5% tolerance, absorbed power subject to 10% tolerance.All Stainless steel (A3) pumps have 10% less head (H).NPSH� = Minimum positive head required for liquids in boiling conditions.
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 291TBA 292TBA 293TBA 294TBA 925TBA 296TBA 297TBA 298
3872
104140175108241276
Q
mNPSH
100,6
0,9
0,91,42,22,83,64,35
5,7
356598
130162194225256
150,9
0,9
0,81,42,12,73,44,14,75,5
305884
112140165191218
251,5
0,95
0,81,32
2,53,23,74,45,1
24436282
102121141160
402,4
1
0,71,21,72,22,73,33,84,4
1525354555657585
H kWH kWH kWH kWH kW603,6
1,1
0,61
1,41,82,12,63
3,5
mNPSH � 0,14 0,14 0,14 0,14 0,14
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 301TBA 302TBA 303TBA 304TBA 305TBA 306TBA 307TBA 308
Q
mNPSH
4482
122162201240276310
150,9
0,9
1,32,33,24,35,26,17
7,9
4075
108144176210241274
251,5
0,95
1,22,12,93,84,75,56,37,2
326083
114140168190216
402,4
1,1
11,72,53,34
4,75,46,1
2140567490
108124139
H kWH kWH kWH kWH kW603,6
1,2
0,81,31,92,53,13,54,14,6
1220253542505562
804,8
1,3
0,61
1,31,72,12,42,73,2
mNPSH � 0,16 0,16 0,16 0,16 0,17
BOCCHEFLANGESIN = Ø 65
OUT = Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 311TBA 312TBA 313TBA 314TBA 315TBA 316TBA 317TBA 318
Q
mNPSH
295481
108132156181205
H kWH kW H kW H kW603,6
0,9
1,22,13,14,15
5,86,77,7
23426382
102120140158
804,8
0,95
11,72,53,34,14,85,56,3
18304459728598
110
1006
1,1
0,81,42
2,63,23,74,34,9
1015222834404652
1257,5
1,4
0,61
1,41,72,12,42,73,2
mNPSH � 0,16 0,17 0,18 0,20
BOCCHEFLANGESIN = Ø 80
OUT = Ø 40
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408
4179
118152188225262300
Q
mNPSH
1006
0,85
2,44,46,58,6
10,612,614,716,6
356296
125158186218247
1257,5
0,9
23,85,77,69,4
12,113
14,7
275075
100124148170195
1509
0,95
1,73,24,96,58,19,6
11,212,9
2036557290
108125142
17510,5
1,05
1,42,94,25,56,98,29,4
10,8
1222354658697990
H kWH kWH kWH kWH kW20012
1,15
1,22,53,54,55,66,77,78,7
mNPSH � 0,22 0,24 0,28 0,35 0,45
BOCCHEFLANGESIN = Ø 100OUT = Ø 50
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508
Q
mNPSH
4584
120158197230270305
17510,5
0,95
58,8
12,516,120
23,827,331
4177
110145178210245280
H kWH kWH kW H kW H kW20012
1
4,78
11,615
18,522
25,529
326086
115140166195224
25015
1,1
47
1012,915,818,621,524,5
2242607998
116135155
30018
1,25
3,55,98
10,512,815
17,419,8
1626384960708192
33420
1,35
34,86,58,4
10,112
13,915,6
mNPSH � 0,35 0,4 0,45 0,55 0,65
BOCCHEFLANGESIN = Ø 100OUT = Ø 65
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
Q
mNPSH
H kW H kW H kW H kW H kW H kW5294
136179221264305349
26716
1,3
8,515,5222936
42,54956
5089
129169207248286327
30018
1,3
7,814,52127
33,54046
52,5
4379
114150183219252289
35021
1,3
7,513,51925303642
47,5
396596
126156185216245
40024
1,35
71217
22,527,532,537,542,5
2442607995
114130150
50030
1,5
5,59,5
13,517,5212528
32,5
917263542526069
58435
1,65mNPSH � 0,36 0,38 0,43 0,5 0,68 0,85
4,87,51013
12,518,52124
Pompa tipoPump model
DNA DNM M h2 P N° A H PesoWeight N° A H Peso
Weight N° A H PesoWeight N° A H Peso
Weight
MOTORE ELETTRICO Electric Motor
DIMENSIONI Dimensions 80M 90S / 90L 100L 112M
65656565656565658080808080808080
100100100100100100100100100100100100100100100100
3232323232323232404040404040404050505050505050506565656565656565
228268308348388428468508268323378433488543598653305380455530605680755830338428518608698788878968
132132132132132132132132140140140140140140140140165165165165165165165165180180180180180180180180
113113113113113113113113151151151151151151151151153153153153153153153153184184184184184184184184
902 10 16 4 902901901
901901900
901
155175175
205220150
180
162172172
192192197
220
445862
606597
90
901901901901900900
901900900900
901900
900
175175190210180180
220150180205
180223
130
172172172172177177
192197197197
220225
245
475559607074
779297
102
87114
134
901901901901900900900900901900900900900
901900900
900900
175175190210180180180180220150180205205
180140185
135180
172172172172177177177177192197197197197
225225225
245245
475256586872778178899499
104
85112122
132147
TBA 291-301-311TBA 292-302-312TBA 293-303-313TBA 294-304-314TBA 295-305-315TBA 296-306-316TBA 297-307-317TBA 298-308-318
TBA 401TBA 402TBA 403TBA 404TBA 405TBA 406TBA 407TBA 408TBA 501TBA 502TBA 503TBA 504TBA 505TBA 506TBA 507TBA 508TBA 651TBA 652TBA 653TBA 654TBA 655TBA 656TBA 657TBA 658
N° A H PesoWeight
132S / 132M
900900900900900900900
900900900903903903906900900900903903906
900900903903906
180180180180180200235
180200225175175195175140180215170205155
175220180227182
197197197197197197197
197197197222222222232225225225250250260
245245270270280
63697376808387
808590
110115120135102112122160170198
113128162177202
N° A H PesoWeight
160M / 160L
903903903903903
903903903903906906903903903903906906906034903903903903906
200200200200200
180210210245170240115155190228175215250333115155190228175
250250250250250
250250250250260260250250250250260260260290270270270270280
9498101105108
120125130135155160127137147157185195200215127142157172197
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 7
N. ForiHoles Q.ty
4
4
4
8
8
8
156
DATI DI FUNZIONAMENTO A 1450 GIRI/1’PERFORMANCE DATA AT 1450 RPM
SERIESERIES TBH SERIE
SERIES TBA
BOCCHEFLANGES
Ø 20
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 201TBH 202TBH 203TBH 204TBH 205TBH 206TBH 207TBH 208
H25507598123148173198
kWQ
mNPSH
50,3
2
0,50,91,31,72,12,52,93,3
H22456788
111133155178
kW100,6
2
0,50,81,21,61,92,32,73
H2040607998
117137156
kW150,9
2
0,40,81,11,41,82,12,42,8
H163045587386
100114
kW251,5
2,2
0,40,60,91,21,41,72
2,3
H915232935404550
kW402,4
3,1
0,30,50,60,80,91,11,31,5
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 291TBH 292TBH 293TBH 294TBH 295TBH 296TBH 297TBH 298
Q
mNPSH
H3468
102136170202238270
kW100,6
1
0,71,32
2,73,44,24,85,5
H316295
125158185220252
kW150,9
1
0,61,21,92,53,33,94,65,3
H275580
108135160186215
kW251,5
1,1
0,61,21,82,33
3,64,24,8
H2040597898118137158
kW402,4
1,2
0,51
1,52
2,53,13,64,2
H1020304050607080
kW603,6
1,5
0,40,81,21,61,92,42,83,3
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 301TBH 302TBH 303TBH 304TBH 305TBH 306TBH 307TBH 308
Q
mNPSH
H4080
120158198236270305
kW150,9
1,1
123
4,15
5,96,87,7
H3670
104139174206236268
kW251,5
1,1
0,91,82,73,74,55,36,27
H265582108136162185210
kW H kW H kW402,4
1,2
0,81,52,33,13,84,55,25,9
1835527086102118132
603,6
1,5
0,51,11,72,32,83,33,94,5
815223038455057
804,8
2,2
0,40,81,11,51,82,22,63
BOCCHEFLANGES
Ø 32
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 311TBH 312TBH 313TBH 314TBH 315TBH 316TBH 317TBH 318
Q
mNPSH
H kW H kW H kW H kW255078104129153180205
603,6
1,6
0,91,82,83,84,75,76,67,5
2038597998117136155
804,8
1,7
0,81,52,33,13,84,65,36,1
14274054688094103
1006
2,2
0,51,21,82,43
3,54,14,6
612182530354044
1257,5
3
0,30,81,11,51,82,22,52,8
BOCCHEFLANGES
Ø 40
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 401TBH 402TBH 403TBH 404TBH 405TBH 406TBH 407TBH 408
H3675110145182220259294
kWQ
mNPSH
1006
2
24,16,18,1
10,212,314,416,4
H306090
120152181212241
kW1257,5
2,1
1,73,65,47,29
10,812,614,4
H22487295
120142166190
kW1509
2,5
1,53
4,66,17,79,2
10,912,4
H1734517086
104121140
kW17510,5
3
1,12,63,85,16,47,89,110,4
H1021324455667688
kW20012
3,7
0,923
4,25,26,37,48,4
BOCCHEFLANGES
Ø 50
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 501TBH 502TBH 503TBH 504TBH 505TBH 506TBH 507TBH 508
Q
mNPSH
H4078
116151190226263300
kW17510,5
2,4
4,48,212
15,819,623,226,830,5
H3870104140174206240276
kW H kW H kW H kW20012
2,5
47,611
14,618
21,525
25,4
295681110138164194220
25015
2,9
3,56,49,512,415,218,12124
2040597896117136155
30018
3,4
35,47,810
12,414,817
19,5
1224344557687990
33420
4
2,54,268
9,811,513,215
BOCCHEFLANGES
Ø 65
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 651TBH 652TBH 653TBH 654TBH 655TBH 656TBH 657TBH 658
Q
mNPSH
H kW H kW H kW H kW H kW H kW4285128170214255298340
26716
3
814,521,528,535
41,548,555
4080120160200240280320
30018
3
71420273339
45,552
3670104140178213248282
35021
3,1
6,512,5182430364248
306088120150180210240
40024
3,4
61116
21,52732
37,543
2038557490110127144
50030
4,4
58,5121620
23,527,531,5
514233442505965
58435
5,6
479
12,515
17,520,523
BOCCHEFLANGESIN = Ø 100OUT = Ø 80
CAPACITA’CAPACITY
m3/hlt/1’
TIPO - MODELTBH 1001TBH 1002TBH 1003
Q
mNPSH
H4385128
kW53432
3
162943
H4181120
kW60036
3
142740
H3771106
kW70042
3,1
122436
H306090
kW80048
3,4
1121,532,5
H183654
kW100060
4,4
917,525
H5
1422
kW116770
5,6
81419
MOTORE ELETTRICO Electric Motor
041041041
041041034034034
907041041034034034
185240262
200220185265333
165210245270310352
310310310
330330330330330
280330330310310310
168173178
165175200210220
150180195225240255
034034034034
041041034034034034
130215295333
215265270310352352
355355355355
330330330330330330
195205215225
184199230245260275
034034034034034034
85145270310352352
355355355355355355
190220235250365280
039039039
100200287
385385385
287302317
039039039
100270287
415415415
290305320
N° A H PesoWeight
180M / 180L
N° A H PesoWeight
200L
N° A H PesoWeight
225S / 225M
N° A H PesoWeight
250M
N° A H PesoWeight
280S / 280M
d
v
z
D
R
DNA
K
DNM
DNA - DNM
32
40
50
65
80
100
D K R
DIMENSIONI FLANGEFLANGE DIMENSIONS
(1) Dimensioni in funzione della marca del motore elettrico installatoNot certified dimensions according to installed motor manufacture
FLANGE:Dimensioni secondoUNI 2223-2229 PN40
FLANGES:Dimensions toUNI 2223-2229 NP 40standards
140
150
165
185
200
235
100
110
125
145
160
190
18
18
18
18
18
22
GrandezzaFrame size
Giri/min.RPM1450kWIEC
80M
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
200L
225S
225M
250M
280S
280M
0,55-0,75
1,1
1,5
2,2-3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
90
MOTORI ELETTRICIELECTRIC MOTOR
BASAMENTI / BASEPLATES
B C E F L G S Ø ON° foriHoles
N°
900
901
902
903
906
907
034
039
041
960
770
610
1170
1400
1200
1700
2150
1350
310
290
210
350
350
420
450
540
420
600
420
370
770
950
900
1100
1600
900
180
175
120
200
225
150
300
275
225
370
350
270
410
410
510
590
680
560
340
320
240
380
380
470
540
630
510
5
5
5
6
6
6
7
7
7
14
14
14
14
14
18
18
18
18
4
4
4
4
4
4
4
6
4
d v z
M12
M16
240
350
45
60
BULLONI DI FONDAZIONE (A RICHIESTA)FOUNDATION BOLTS (OPTIONAL)
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 6
516
DISEGNI IN SEZIONE TIPICITYPICAL CROSS SECTION
CAMPI DI SCELTA A 1450 GIRI/1’PERFORMANCE RANGE AT 1450 RPM
Pompa serie TBH con 2 tenute meccaniche semplici (costruzione …/C).Pump series TBH with 2 single mechanical seals (design …/C).
Pompa serie TBA con tenuta meccanica semplice (costruzione …/R).Pump series TBA with single mechanical seal (design …/R).
TBHSERIESERIES
400
Hm
Q l/1'
Q m3/h
300
200
10080
60
40
30
20
10
0 10 20 30 40 70 100 200 300 400 700 1000
8060403020108643210
TBH 200
TBH 290
TBH 300
TBH 310
TBH 400 TBH 500
TBH 650
TBH 1000
TBASERIESERIES
400
Hm
300
200
10080
60
40
30
20
10
0 10 20 30 40 70 100 200 300 400 600
403020108643210
TBA 290
TBA 300
TBA 310
TBA 400
TBA 500
TBA 650
Q l/1'
Q m3/h
Dati indicativi riferiti adacqua a temperaturaambiente.Per le curve difunzionamentospecifiche contattare la POMPETRAVAINI.Information is forwater at roomtemperature. Forspecific performancecurves contactPOMPETRAVAINI.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 5
Scatola cuscinetto e tenuta meccanicaBearing and mechanical seal housing
Tipo di tenuta sull’albero(v. pag. 16 e 17)Type of shaft seal (see pag. 16 & 17)
Tipo di costruzioneType of construction
Grandezza della pompaPump size
Numero di stadiNumber of stages
Modifica progetto idraulicoModification of hydraulics
Pompe autoadescanticentrifughe multistadio
Self-priming multistagecentrifugal pumps
174
CODICI, MATERIALI E LIMITICODES, MATERIALS AND LIMITS
DISEGNI IN SEZIONE TIPICITYPICAL CROSS SECTION
Costruzione POMPETRAVAINIPOMPETRAVAINI construction
Esecuzioni specialiSpecial constructions
Costruzione monobloccocon lanterna (su richiesta)Close coupled constructionwith lantern (on request)
Materiali di costruzione (v. tab.)Materials of construction (see table)
Modifica progetto costruttivoConstruction modifications
ESEMPIO CODICE IDENTIFICAZIONE POMPA / EXAMPLE OF MODEL DESIGNATION
T B H 40 3 A / 1 - C / A3 - M / T - V - Z
LIMITI DI PRESSIONE E TEMPERATURA / PRESSURE AND TEMPERATURE LIMITS
40
-10
35
30
250 40 80 120 160
TEMPERATURA LIQUIDO POMPATOPUMPED LIQUID TEMPERATURE �C
Il valore di pressione massimo indicato è lasomma della pressione di aspirazione e dellaprevalenza a portata nulla.I limiti indicati non sono validi per l’esecuzio-ne B2.
The given values for maximum pressure isthe sum of the suction pressure and thepump head at shut-off point.These limits are not valid for B2 construc-tion.
VDMA N° DescrizioneDescription
106
Corpo prementeDischarge casing
Elemento e diffusorePort plate and diffuser
AlberoShaft
CollettoreManifold
GiranteImpeller
Boccola elementoElement bushing
MATERIALI DI COSTRUZIONE STANDARD / STANDARD MATERIALS OF CONSTRUCTION
GH RA A3 B2 GP
107
109114149
210
147
230
310.1
357
Corpo aspiranteSuction casing Ghisa sferoidale
Ductile iron
GhisaCast iron
Acciaio inox AISI 420Stainless steel AISI 420
AcciaioCarbon steel
OttoneBrass
—
GhisaCast iron
CarbografiteCarbon — Bronzo
Bronze
OttoneBrass
BronzoBronze
AcciaioCarbon steel
Acciaio inox AISI 420Stainless steel AISI 420
GhisaCast iron
Ghisa sferoidaleDuctile ironBronzo
Bronze
Acciaio inox AISI 316 ASTM-CF8MStainless steel AISI 316 ASTM-CF8M
MATERIALI SPECIALI SU RICHIESTA - Tabella indicativa: per informazioni più dettagliate consultare il ns. Ufficio CommercialeSPECIAL MATERIALS ARE AVAILABLE UPON REQUEST - For further information please consult our Sales Office
Particolare pompa serie TBH con bronzina corpoe boccola elemento (costruzione …/R/GP).Detail of pump series TBH with sleeve bearing and element bushing (design …/R/GP).
COMPONENTI PRINCIPALIVDMAN° DENOMINAZIONE
106 Corpo aspirante107 Corpo premente109 Elemento aspirante114 Elemento premente149 Diffusore210 Albero230 Girante stellare230.2 Girante centrifuga310 Bronzina corpo310.1 Boccola elemento320 Cuscinetto a sfere355 Supporto bronzina357 Scatola cuscinetto e tenuta mecc.421 Anello di tenuta433… Tenuta meccanica542 Boccola tenuta (solo per esec. A3)925 Dado bloccaggio girante
MAIN COMPONENTS
DESIGNATION
Suction casingDischarge casingSuction elementDischarge elementDiffuserShaftOpen “star” impellerCentrifugal impellerSleeve bearingElement bushBall bearingSleeve bearing housingBearing and mech. seal housingRadial seal ringMechanical sealSeal insert (A3 construction only)Impeller locking nut
Solo costruzione A3A3 construction only
Esecuzione con tenute meccaniche doppie contrapposte(costruzione …/CC…/T oppure …/RR…/T).Double mechanical seals construction, back to back(design …/CC…/T or …/RR…/T).
Esecuzione con tenute meccaniche doppie in serie(costruzione …/C2…/T oppure …/R2…/T).Double mechanical seals construction, tandem(design …/C2…/T or …/R2…/T).
ESECUZIONE CON CAMERE DI RAFFREDDAMENTO O RISCALDAMENTOCONSTRUCTION WITH COOLING OR HEATING CHAMBERS
Cooling or heating the seals area with liquidfrom an external source.
External mechanical seals flushing with liquidfrom an external source.
Pumping fluid.
Liquido di raffreddamento o di riscaldamentonella zona delle tenute (dall’esterno).
Liquido di lubrificazione alle tenuteesterne (dall’esterno).
Liquido di pompaggio.
Lato
com
ando
Driv
e en
dLa
to o
ppos
to c
oman
doN
on-d
rive
end
Lato
com
ando
Driv
e en
dLa
to o
ppos
to c
oman
doN
on-d
rive
end
PRES
SIO
NE
MAX
FIN
ALE
MAX
DIS
CH
ARG
E PR
ESSU
RE
bar
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 4
318
SELF-PRIMING CENTRIFUGAL PUMPSALCUNI ESEMPI COSTRUTTIVISOME INSTANCES OF CONSTRUCTION
Derivate dalla serie TBH con l’aggiunta di un prestadiocentrifugo, queste pompe raggiungono un valore di NPSHmolto basso che le rendono particolarmente idonee alpompaggio di liquidi vicini al punto di ebollizione ed incondizioni gravose.La particolare esecuzione garantisce il convogliamento diliquidi contenenti gas e, in special modo, gas liquefatti.Tutte le altre caratteristiche prestazionali, costruttive e diimpiego della serie TBH sono conservate in questa serie dipompe, garantendo così anche una elevata modularità edintercambiabilità per una maggior semplicità di gestione deicomponenti a magazzino.Portate fino a 35 m3/h.Prevalenze fino a 40 bar.
TBAThese pumps derive from the TBH series with an additionalcentrifugal stage at the suction side.Pumps TBA have extremely low NPSH requirements and areparticularly suitable for handling boiling liquids and difficultapplications.This design is especially suited to handle liquids withentrained gases and liquified gases such as LPG.TBA series have performances, design and dutycharacteristics as the TBH series.Pump components are interchangeable thus reducing theneed to stock spare parts for both series.Capacities to 35 m3/h.Heads to 40 bar.
COSTRUZIONE / CONSTRUCTIONLe pompe autoadescanti serie TBH e TBA sono costituite da una girante di tipostellare autobilanciata la quale è racchiusa tra un disco aspirante ed un discopremente opportunamente studiati sul principio dei canali laterali.Si possono montare in serie vari stadi in modo da ottenere a pari portata unaumento proporzionale della prevalenza.Per il trasporto di liquidi corrosivi, tossici, inquinanti e maleodoranti ed in tutti icasi nei quali non ci debba essere alcuna perdita verso l’esterno, sonodisponibili anche le pompe serie TBK e TBAK a trascinamento magneticoricavate dalle pompe serie TBH e TBA.The self-priming pumps series TBH and TBA utilize the lateral channelprinciple. The open “star” type impeller is hydraulically balanced and enclosedbetween the suction and discharge port plates to form the pumping stage.Stages are mounted in series to give proportional higher discharge pressureswith constant capacities.The magnetic drive pumps series TBK and TBAK derive from the series TBHand TBA. They are suitable to handle hazardous, toxics, odorous or pollutingliquids and other applications where zero liquid leakage is desired.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREELETTRICO.Pump series TBHCLOSE-COUPLED to ELECTRIC MOTOR.
Pompa serie TBHEsecuzione ad ASSE NUDO.Pump series TBHBARESHAFT construction.
Pompa serie TBHEsecuzione ACCOPPIATA (BASE-GIUNTO).Pump series TBH directCOUPLED and base mounted.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 3
POMPE AUTOADESCANTI CENTRIFUGHE ALCUNI ESEMPI COSTRUTTIVISOME INSTANCES OF CONSTRUCTION
2 19
• Pompe autoadescanti centrifughe multistadio ad asseorizzontale e bocche di aspirazione e mandata verticali.
• Pompaggio di miscele di gas liquidi e non abrasivi.• Idonee per basse portate ad alte prevalenze.• Capacità di aspirazione fino a 8,5 m.c.a. di vuoto.• Basse velocità di rotazione per un’elevata affidabilità,
silenziosità e lunga durata di funzionamento.• Assenza di spinte assiali sui cuscinetti grazie alle giranti
libere bilanciate idraulicamente.• Tenute meccaniche di serie unificate secondo le norme
UNI EN 12756.• Possibilità di esecuzione con tenute meccaniche doppie
contrapposte o in serie e con raffreddamento oriscaldamento delle camere tenuta.
• Progetto innovativo con ridotto numero di componenti.• A richiesta esecuzione monoblocco accoppiata tramite
giunto elastico a motore unificato forma B5 fino a 22 kW.• Ampia scelta di materiali costruttivi per soddisfare
molteplici esigenze.• Portate fino a 70 m3/h.• Prevalenze fino a 40 bar.
TBH
APPLICAZIONI / APPLICATIONS
• Multistage self-priming centrifugal pumps with horizontalmounting vertical suction and discharge flanges.
• Capable of handling mixtures of gas and clean liquids.• Low capacity - high head.• Suction lift to 8,5 m.w.c.• Low operating speed for extended life, low vibration, low
noise level and maximum reliability.• Impellers are individually hydraulically balanced thus end
thrust forces to bearings are eliminated.• Mechanical seals are standard and unified to UNI EN 12756.• Optional double mechanical seals back to back or tandem.• Cooled or heated seal housing are available.• Reduced number of components is achieved by design
innovation.• Choice of motor mounting, including close-coupled through
flexible coupling to unified B5 motor, up to 22 kW.• Variety of materials are available to meet specific
requirements.• Capacities to 70 m3/h• Heads to 40 bar.
• Le pompe della serie TBH e TBA sono adatte alpompaggio di liquidi puliti, corrosivi, caldi o freddinell’industria chimica, petrolchimica, farmaceutica edalimentare.
• Estrazione di condensati e distillati.• Impianti di stoccaggio solventi e carburanti.• Alimentazione caldaie.• Estrazione da processi sottovuoto.• Impianti di imbottigliamento e rifornimento G.P.L. e gas
liquefatti.• Gruppi antincendio ed autoclavi.• Servizi generali e sentine nell’industria navale.• Impianti di lavaggio.
• Pumps series TBH and TBA are suitable to handle cleanliquids, corrosives, hot or cold in the chemical,petrochemical, pharmaceutical, food industries, etc.
• Removal of condensates and distilled liquids.• Solvents and liquified gases applications.• Boiler feed applications.• Removal or liquid from processes under vacuum.• Filling stations and transfer of LPG and liquified gases.• Fire fighting systems and autoclaves.• Potable and sanitary systems in the naval industry.• Spray washing installations.
Pompa serie TBKEsecuzione di una pompa serie TBH ad ASSENUDO con TRASCINAMENTO MAGNETICO.Pump series TBKBARESHAFT pump series TBH withMAGNETIC DRIVE.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREIDRAULICO.Pump series TBHCLOSE-COUPLED to HYDRAULIC MOTOR.
Pompa serie TBAKEsecuzione di una pompa serie TBA adASSE NUDO con TRASCINAMENTOMAGNETICO.Pump series TBAKBARESHAFT pump series TBA withMAGNETIC DRIVE.
Pompa serie TBHEsecuzione MONOBLOCCO con MOTOREELETTRICO in versione VERTICALE.Pump series TBHCLOSE-COUPLED to ELECTRIC MOTORin VERTICAL version.
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 2
NA4.CC.TBHA.I0
00/ZC.US/UZ
Catalogo TBH - TBA Ita-Ing. 04.2016:Catalogo TBH - TBA Ita/Ing. 2012 27-05-2016 15:22 Pagina 1