catalogo testing. china
TRANSCRIPT
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 1/83
Fresh concrete testingCONCRETE TESTING
page 2 http://www.testmould.com
SAMPLING OF FRESH CONCRETE
Model No Capacity(oz) Weight(g) Long(mm)
SC-R06 06 78 190SC-R12 12 120 220
SC-R24 24 210 270SC-R38 38 300 310SC-R58 58 440 380SC-R85 85 525 415
SC-F12 12 115 220
SC-F24 24 210 270SC-F38 38 300 310SC-F58 58 440 380SC-F85 85 525 415
STANDARD:EN12350-1
SC series scoop
Material: Stainless steel, Aluminium
SC-R
SC-F
STANDARD:
EN 12350-2, BS 1881:102, ASTM C143
SM series slump coneThe Slump Cone (also known as Abrams cone) is spun fromheavy gauge steel and is seamless to provide a stronger,more durable product that is easy to clean. All parts areplated for rust resistance.
20 cm Dia base, 10 cm Dia top and 30 cm height.
SLUMP TEST
ModelNo
Dimension(mm)
Weight(kg)
Remark
SM-EG 100x200x300 2.0 Galvanized
SM-EP 100x200x300 2.0 Blue
SM-EB 100x200x300 2.0 Black
SM-LG 100x200x300 3.0 Galvanized
SM-PL 100x200x300 3.0 Abs plastic with funnel
SM-HS 100x200x300 1.5 S/S
The correct sampling and mixing of fresh concrete isimportant if test results are to be reliable. Most of theequipment necessary for efficient sampling and mixing isstandard laboratory equipment detailed in the LaboratoryEquipment Section of this catalogue.
125 mm dia. x 250 mm long, 5 kg capacity. Ideal for takingincrements of concrete.
SC-M Metal scoop
SC-M
SM-HS slump cone
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 2/83
Fresh concrete testingCONCRETE TESTING
http://www.testmould.com page
3
SLUMP TEST(CONTINUED)
The test apparatus is carried out by filling the slump conewith freshly mixed concrete which is tamped with a steel
rod in three layers. The concrete is levelled off with the topof the slump cone, the cone removed, and the slump of thesample is immediately measured.
STA-01 Slump cone test set
STA-01 Slump cone test set
SM-EB Slump cone
Weigt approx: 7 Kg
SM-EP Slump cone
We propose two different models: the standard oneparticularly suitable for laboratory testing and the portablemodel very practical for site testing. A number of partsand accessories are however available for particularrequirements.
Accessories
SM series Slump Cone
Two models of rule available:
SM-R3 Steel rule 300 mm long
or SM-R5 Steel rule 500 mm long
SM-BP40 Metal base plate 400x400x40 mm
SM-F Slump cone funnel
SC series Scoop
TR-S600 Steel tamping rod
To ensure that concrete achieves its maximum possiblestrength and yet retains its ease of placing on site, it isessential that the design of the concrete mix, in relation tothe water-cement ratio and workability, is closely controlled.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 3/83
Fresh concrete testingCONCRETE TESTING
page 4 http://www.testmould.com
STA-02 Slump cone test set
SLUMP TEST(CONTINUED)
STA-03 Slump cone Test Set
STA-02 Slump cone test set
STA-03 Slump cone test set
TR-S600 Steel tamping rod
Accessories
SM series Slump cone
Two models of rule available: SM-R3 Steel rule 300 mm long
or SM-R5 Steel rule 500 mm long
SM-BP60 Metal base plate 600x400x4 mm
galvanized
SC series Scoop
TR-S600 Steel tamping rod,
600 mm long x 16 mm dia,
hemispherical at both ends.
TR-S380 Metal tamping bar, 380 mm long
Weight: 1.6 Kg
Accessories
SM series Slump cone
Two models of rule available:
SM-R3 Steel rule 300 mm long
or SM-R5 Steel rule 500 mm long
SM-BP40 Metal base plate 400x400x40 mm
SC series Scoop
TR-S600 Steel tamping rod,
600 mm long x 16 mm dia,
hemispherical at both ends.
Weight(approx): 0.95 Kg
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 4/83
Fresh concrete testingCONCRETE TESTING
http://www.testmould.com page
5
SLUMP TEST(CONTINUED)
STA-04 Portable slump cone test set
Portable slump cone test set Complete with metal baseplate SM-BP/C and TR-G graduated tamping rod. Clampson the base hold the cone for filling and tamping. Afterthe cone is removed, the handle raises over the specimen
and the slump is measured using a 22 cm scale engravedin 1 cm increments on the end of the rod. The set ofcomponents are fitted together for easy carrying.
Weight approx: 8 Kg
Accessories
SM series stainless slump cone
SM-BP/C Base plate with clamps and
measuring bridge
SC series scoop
TR-Steel graduated tamping rod,
600 mm long x 16 mm dia,
hemispherical at both ends.
VEBÉ TEST
STANDARD: EN 12350-3
This test method is a variation of the simple slump test andsubjects the concrete to vibration after removal from theslump cone.The time taken for the concrete to be recompacted is takenas a measure of workability.The small vibrating table operates at a fixed amplitudeand frequency, and in the test a plastiisc is placed intocontact with the upper surface of the concrete. The testis completed when the lower surface of the disc has beencompletely coated with cement grout.
EL34-0300/01
Vebé consistometer
EL34-0300/01 Vebé consistometer
STA-04 Portable slump test set
Specification
Vibrating freqency: 50 HZ
Power: 380 V, 250 W
Swing: 0.5±0.1 mm
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 5/83
Fresh concrete testingCONCRETE TESTING
page 6 http://www.testmould.com
FLOW TABLE LABORATORY METHOD
STANDARD: BS 4551-1, 3892-1, ASTM C320STANDARD: BS 1881-103, BS 5075
FT-A Motorized concrete flow table
FT-B Motorized concrete flow table
To determining the quantity of water and the standardconsistence by measuring the fluidity of cement mortar.
left: FT-A flow table; right: FT-B flow table
Specification
Weight of vibrating part: 3.45±0.010 kg
Drop height: 10±0.1 mmVibrating frequency: 1 HZ
Working cycle: 30 S-25 STable diameter: 300±1 mm
Dimensions: 400×400×690 mm
Net weight: 25 kg
Specification
Weight of vibrating part: 4.35 Kg±0.15 kg
Drop height: 10±0.2 mmVibrating frequency: 1 HZ
Working cycle: 25 STable diameter: 300 mm
Net weight: 25 kg
The apparatus is used for determining the workability offresh concrete, provided the maximum size of the aggregatedoes not exceed 38 mm. The test is particularly useful forconcrete mixes of very low workability where true slumpvalues are not reliable.
It consists of two rigid conical hoppers and a cylindermounted on a rigid metal frame. The lower openings ofthe hoppers are fitted with hinged trap-doors having quickrelease catches. A circular metal plate is provided to coverthe top of the cylinder.
COMPACTION FACTOR APPARATUS
CF-A Compaction factor
CF-A Compaction factor
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 6/83
Fresh concrete testingCONCRETE TESTING
http://www.testmould.com page
7
FLOW TABLE TEST
STANDARD: EN 12350-5
54-C0151/A Concrete flow table consists of a
double wooden table measuring 700x700 mm and hingedat one side. The top table is covered with a flat metal plate2 mm thick, inscribed, and protected against corrosion. Thegalvanised steel cone has a top 130 mm dia., base 200 mmdia., and is 200 mm high. Supplied complete with woodentamping rod.
General description and specifications
Concrete flow table
Weight appox: 25 Kg
Spare parts 54-C0151/1 Flow cone top 130 mm dia., base 200 mmdia., 200 mm high
54-C0151/2 Wooden taping rod
This test will be of interest to those involved with concretehaving a high workability. The test determines the flow index
as an arithmetic mean of the diameter of the specimen afterworking on a flow table.
Concrete flow table
When fresh concrete is delivered to a site by atruck mixer it is sometimes necessary to check its consistence before pouring it into formwork.If the consistence is not correct, the concrete will nothave the desired qualities once it has set, particularly thedesired strength. If the concrete is too pasty, it may result incavities within the concrete which leads to corrosion of therebar, eventually leading to the formation of cracks whichwill accelerate the whole process, rather like insufficientconcrete cover. Cavities will also lower the stress theconcrete is able to support.
- The flowtable is wetted.- The upside down funnel is placed on the flowtable andfilled with fresh concrete.
- The funnel is lifted up, allowing the concrete to flow.- The flowtable is then lifted up several centimeters andthen dropped, causing the concrete flow a little bit further.- After this the diameter of the concrete is measured. Theresult is called "Ausbreitmaß" in German.
Conducting the test
The upside down funnel filled with concrete prior to lifting.
The diameter of the resulting flow is measured.
These images show a flow test with very fluid concrete for a special application
which made compression impossible.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 7/83
Hardened concrete testingCONCRETE TESTING
page 8 http://www.testmould.com
CONCRETE MIXERS
ModelNo.
Voltage Frequency PowerMotorSpeed
Drum SpeedDrum
CapacityDrum Diameter Net Weight
PM-01 110V/230V 50/60Hz 1/2 HP 1420r/min 27r/min 130L/140L 10" 65 Kg
PM-02 110V/230V 50/60Hz 0.5 HP 1420r/min 27r/min 140L
PM-03 110V/230V 50/60Hz 5.5-9 HP 1420r/min 27r/min 260L/350L 313 Kg/338 Kg
PM-04 110V/230V 50/60Hz 1/4 HP 1420r/min 27r/min 52L 10" 36 Kg
PM-05 110V/230V 50/60Hz 1/2 HP 1420r/min 27r/min 130L/140L 10" 68 Kg
PM-06 110V/230V 50/60Hz 1/2 HP 1420r/min 27r/min 130L/140L 10" 52 Kg
Concrete mixer
An extremely mobile mixer,equipped with a manuallycontrolled discharge foreasy unloading of the mixerinto a suitable container orwheelbarrow. The mixingblades and paddle areproduced from a specialsteel to resist wear, and toensure a fast and effectivemixing operation.
PM-01
PM-02
PM-03
PM-04 PM-05
PM-06
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 8/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
9
CONCRETE CORE DRILL
CD-E/1 core drilling machine
CD-E/1 Core drilling machine.
Electric motor.
Main features:1. Full 360o operation for coring at any angle.2. Be equipped with safety clutch to prevent damagingbody when bit freezing torque force is too high.
CD-E/2 Core drilling machine.
Specification
Max.drilling diameter: 180 mmRated Voltage: 110/220/240V
Rated frequency: 50-60 HzRated input power: 2300 wNo-load speed: 750 r/minN.W: 26 kg
Specification
Max.drilling diameter: 130 mmRated Voltage: 110/220/240V
Rated input power: 1550 wNo-load speed: 1600 r/minN.W: 10.5 kg
Specification
Max.drilling diameter: 200 mmMax depth of drilling: 400 mm-700 mm
Rated input power: 3.3 Kw
Roted speed: 800-1200 r/min
N.W: 130 Kg
Dimentions: 1080×780×1150 mm
CD-P Core drilling machine.
Petrol motor
CD-P core drilling machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 9/83
Hardened concrete testingCONCRETE TESTING
page 10 http://www.testmould.com
DB Series diamond core drill bit
ITEM NO.OUTER
DIA(INCH)OUTER
DIA.(MM)ITEM NO
OUTERDIA(INCH)
OUTERDIA(MM)
DB 01 1/3 8 DB 21 3 1/4 83
DB 02 2/5 10 DB 22 3 1/2 89
DB 03 1/2 12 DB 23 3 7/9 96
DB 04 5/9 14 DB 24 4 102DB 05 5/8 16 DB 25 4 1/4 108
DB 06 5/7 18 DB 26 4 1/2 114
DB 07 4/5 20 DB 27 4 5/7 120
DB 08 6/7 22 DB 28 5 127
DB 09 1 24 DB 29 5 1/5 132
DB 10 1 26 DB 30 6 150
DB 11 1 1/9 28 DB 31 6 1/4 159
DB 12 1 1/6 30 DB 32 6 1/2 166
DB 13 1 1/4 32 DB 33 7 180
DB 14 1 1/2 38 DB 34 7 7/8 200
DB 15 1 4/7 40 DB 35 8 2/3 220
DB 16 1 3/4 44 DB 36 9 2/3 245
DB 17 2 51 DB 37 10 5/8 270
DB 18 2 1/4 57 DB 38 11 4/5 300
DB 19 2 1/2 63 DB 39 13 7/9 350
DB 20 3 76 DB 40 15 3/4 400
This diamond core drill bit has excellent ability in drillingconcrete, reinforced concrete and brick wall. Thinnerdiamond segment and thinner tube wall can easily reducethe resistance and increase the drilling speed. It may besold separately or with core drilling machine, both modelCD-E and CD-P.
Feature:1. Thinner diamond segment and thinner tube wall caneasily reduce the resistance and increase the drilling speed.2. Very fast cutting speed and low cutting pressure.3. Different connection end for different drilling machine.4. Especiall effective in drilling through reinfored concrete5. The diameter of them can be produce according to therequirment of users, the main dimensions are as followtable.
DB Series diamond core drill bit
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 10/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
11
CONCRETE TEST HAMMERS
HT225-A concrete test hammer
HT225-A Concrete test hammer
This instrument applies to non-destructive testing about theinspection strength of sintered common brick, at the sametime, it is also suitable for light bone structure concrete andother light bone materials strength inspected.
STANDARD: ASTM C 805, BS 1881:202, NF P18-417,
DIN 1048 AND UNI 9189
HT-75 concrete test hammer
HT-75 Concrete test hammerThis instrument applies to non-destructive testing about theinspection strength of sintered common brick, at the sametime, it is also suitable for light bone structure concrete andother light bone materials strength inspected.
Specification
Measuring strength ranges: 10-60 MPa
Normal impact energy: 2.207 J(0.225Kgf.m)Strike hammer stroke: 75 mm
The friction force of pointer slider: 0.5±0.8 NSpherical radius of strike rod: 25 mm±1 mmThe rebound values calibratedon steel anvil:
80±2
Dimensions: Dia. 54×278 mmWeight approx: 1 Kg
Normal impact energy: 0.735 J
Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25±1 mmThe rebound values calibrated
on steel anvil:
74±2
Dimensions: Dia. 54×268 mmWeight approx: 1 Kg
Specification
HT225-P Concrete test hammer
Specification
Normal impact energy: 2.207 J
Strike hammer stroke: 75 mmStiffness of striketension spring:
785±40 N/cm
The rebound valuescalibrated on steel anvil:
80±2
Free length of strike tensionspring:
61.5±0.3 mm
Work temperature: -4— +40Environment humidity: ≤95% (relative humidity)Weight appox: 0.8 Kg
HT225-P CONCRETE TEST HAMMER
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 11/83
Hardened concrete testingCONCRETE TESTING
page 12 http://www.testmould.com
HT225-S Concrete test hammer
HT225-S Concrete test hammer
This product completely consistent with national andindustry technical specification.This product is suitable for supervision company, qualitysampling inspected in-site, and testing centers etc., at thesame time, it can automatically evaluating results in-site,without manual calculation.
HT225-V Concrete test hammer
This product completely consistent with national andindustry technical specification.This product is suitable for supervision company, quality
sampling inspected in-site, and testing centers etc., at thesame time, it can automatically evaluating and printingresults in-site, without manual calculation.
CONCRETE TEST HAMMERS(CONTINUED)
HT225-V Concrete test hammer
Specification
Measuring strength ranges: 10-60 Mpa
Normal impact energy: 2.207 J(1 Kgf.m)Strike hammer stroke: 75 mmThe consistency of the sampledisplayed values:
≤±1(difference valuebetween digitalsampling outputvalue and the pointerreadings)
Stiffness of striketension spring:
785 N/cm
The rebound valuescalibrated on steel anvil:
80±2
Power: 1.5V AA alkalinebatteries 2 pcs
Power consumption: sampling case≤50mA(average current);idle case: ≤20 mA
Storage: 80000 testing results
Specification
Measuring strength ranges: 10-60 Mpa
Normal impact energy: 2.207 JStrike hammer stroke: 75 mmThe consistency of the sampledisplayed values:
≤±0.5(difference valuebetween digital samplingoutput value and thepointer readings)
Stiffness of striketension spring: 785 N/cm
The rebound valuescalibrated on steel anvil:
80±2
Display: 16-bit true color, 176×220resolution, 5 gradesbacklight adjustment
Data storage capacity: 480000 inspecting results,20 special measurtingstrength curves, and itcould also be add by userown according to need
Power: 3.6V/1300mAH recharginglithium battery, charging
power adapter 5V/2A.Maximum backlight, turnoff speech cases, it can becontinuous work 13 hours.
Power consumption appox: 100 mA (Voice off)Maximum backlightsituation
Communication interface: USB2.0 full-speedWeight: 1.1 Kg
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 12/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
13
HT-1000 Concrete test hammer
Model HT-1000 is consistent with JGJ/T23-2001 technicalspecification, and it is suitable for inspecting compressivestrength of high-rise building components, bridges andconcrete structures (such as blabs, beams, columns, bridgeetc.)
Specification
Measuring strength ranges: 50-80 MpaNormal impact energy: 9.8 J(1 Kgf.m)
Strike hammer stroke: 140 mmThe friction force of pointer slider: 0.5±0.8 NStiffness of strike tension spring 10 N/cmThe rebound values calibratedon steel anvil:
83±2
Dimensions: Dia. 65×486 mmWeight approx: 3.5 Kg
HT-1000 concrete test hammer
HT-3000 concrete test hammer
HT-20 Concrete test hammer
HT-3000 Concrete test hammer
HT-20 Concrete test hammer
This instrument applies to inspect compressive strength ofmortar in masonry for industrial and civil buildings in generalsintered common brick masonry.
HT-3000 is a heavy type Concrete Test Hammer, its kineticenergy of impact is 29.43J. It is extensively used for testingthe concrete’s quality of large concrete component, waterconservancy project, railway tunnel, mines, bridges, heavyways of roads, runways, building foundation beams andetc.
Specification Specification
Measuring strength ranges: 1.0-25 Mpa
Normal impact energy: 0.196 J(0.02kgf.m)
Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25 mmThe rebound values calibratedon steel anvil:
74±2
Dimensions: Dia. 54×268 mmWeight approx: 1 Kg
Normal impact energy: 29.43 J
Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25 mmThe rebound values calibratedon steel anvil:
63±2
Hammer weight: 2 Kg
Static friction between vernier and verniershaft: 100-150g
Dimensions: 105×320×680 mmWeight approx: 8 Kg
CONCRETE TEST HAMMERS(CONTINUED)
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 13/83
Hardened concrete testingCONCRETE TESTING
page 14 http://www.testmould.com
CUBE MOULDSCALIBRATION ANVIL
STANDARD:
EN 12390-1, BS1881
STANDARD:
EN 12504-2; ASTM C805, D5873
Test procedures require that specimens are cast in anumber of standard sizes convenient for compressive andflexural strength determination. The engineering tolerancesspecified for moulds are very stringent and the internalfinish of the surface must be of a high order to complywith the recommendations laid down in many Internationalstandards. Moulds must not deform during manufacture ofconcrete specimens if the specimen dimensions are to bemaintained.
CM-FA 4-part with clamp attached base plate. Cube
mould for concrete hardened testing. Material is cast iron.Machined surface finished by flat grinding machine. Nodistortion during specimen preparation.
CM-FA cast iron cube mould
Model No Dimension(mm) Weight(kg)
CM-FA100 100×100×100 9.5
CM-FA150 150×150×150 18
Verification of dimension using digital vernier caliper Verification of dimension using electronic digital display depth caliper
Used for calibration of concrete test hammer (models HTseries). Made of special alloy steel and supplied completewith traceable hardness certificate. It is essential for theperiodical laboratory verification of the Rock classificationhammer.Dimensions: 150 mm dia×230 mm heightWeight(approx): 17 Kg
EL35-1530 Calibration anvil
EL35-1530 Calibration anvil
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 14/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
15
CM-FC Cast iron cube mould
CM-FC Cube mould is build up by four parts 45 degree
wall, save time to assamble or reassamble, we may regardtwo connect wall as one wall, only want to disjoin two partstogether.
CM-E Cast iron cube mould
CM-FB Cube mould4-part with clamp attached base plate.
CUBE MOULDS(CONTINUED)
CM-FB Cast iron cube mould
Model No Dimension(mm) Weight(kg)
CM-FC100 100×100×100 9
CM-FC150 150×150×150 16
Model No Dimension(mm) Weight(kg)
CM-FB100 100×100×100 9
CM-FB150 150×150×150 16
Model No Dimension(mm) Weight(kg)
CM-E100 100×100×100 5.5CM-E150 150×150×150 10
CM-E200 200×200×200 16
CM-E cast iron cube mould poured into concrete CM-E Cast iron cube mould
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 15/83
Hardened concrete testingCONCRETE TESTING
page 16 http://www.testmould.com
CM-T Cube mould is new design product, one blot
connect two parts in every side. Save time to assemble ordissassemble the mould. Base clamps on this mould areslotted.
CUBE MOULDS(CONTINUED)
CM-P Cube mould is best economic mould in this
range, it is made of ABS plastic and use special self motioninjection plastice machine to squeezed out, one timefinished and easy to carry.
CM-PA150 Plastic concrete test cube mould
is reusable and sturdy in this range, it is light and easy tocarry, made in collapsible-two parts for quick to install. It willnot rust and easy to maitain.
CM-P Plastic cube mould
CM-PA150 Plastic cube mould
CM-T Cast iron cube mould
Model No Dimension(mm) Weight(kg)
CM-T100 100×100×100 9
CM-T150 150×150×150 16
Model No Dimension(mm) Weight(kg)
CM-P100 100×100×100 0.7
CM-P150 150×150×150 0.9
Model No Dimension(mm) Weight(kg)
CM-PA150 150×150×150 2.7
CM-T Cube mould exploded view
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 16/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
17
These moulds are constructed of plated steel for rustresistance and are dimensionally stable under severe use.Moulds are split along one side with 2 quick-acting clampswelded to mould. When open, mould springs apart slightlyto allow specimen removal. Include detachable base plate.
CYLINDER MOULD
CY-MS Steel cylinder mould
Model NoDimension (mm)
Dia.×HeightWeight
(kg)CY-MS50 50×100 1CY-MS100 100×200 9CY-MS150 150×300 16
CY-MS160 160×320 18
CY-CW100 Steel cylinder mould with handle and lid
Model No Dimension(mm)Dia.×Height
Weight(kg)
Wall thickness(mm)
CY-CW100 100×200 9 5
STANDARD:
ASTM C39, C192 –AASHTO T23, T126
This type cylinder mould is made of cast iron and surface iscoated black or blue and the inner surface is all grinded by
the lathe. It’s very heavy.
CY-MC Cast iron cylinder mould
Model NoDimension(mm)
Dia.×HeightWeight(kg)
CY-MC100 100×200 9
CY-MC150 150×300 17
CY-MC160 160×320 22
CY-MS Steel cylinder mould
CY-MC Cast iron cylinder mould
CY-CW Steel cylinder mould
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 17/83
Hardened concrete testingCONCRETE TESTING
page 18 http://www.testmould.com
CYLINDER MOULD(CONTINUED)
Plastic concrete test cylinder mould is reusable andsturdy in this range, it is light and easy to carry, made in
collapsible-two parts for quick to install. It will not rust andeasy to maitain.
The Steel Cylinder Mold is available for preparing concretetest specimens for compression testing. It comprises themold with a ring keep it tightly closed and a base plate thatis fixed to the cylinder when being used. Both items areplated to resist corrosion.
Model NoDimension(mm)
Dia.×HeightWeight(kg)
CY-MP/A(with bolt) 100×200 0.89
CY-MP/B(with clip) 100×200 0.92
CY-MP/C(with bolt) 150×300 1.76
CY-MP Plastic cylinder mould CY-SS Steel cylinder mould
Model NoDimension(mm)
Dia.×HeightWeight(kg)
Wall thickness(mm)
CY-SS11 150×150 8.6 6
CY-SS12 100×200 6.5 6
CY-SS13 150×300 13 6
CY-SS Steel cylinder mould is split vertically into two parts. Exploded view CY-MP/B Plastic cylinder mould exploded view
CY-SS Steel cylinder mould
CY-MP Plastic cylinder mould
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 18/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
19
BEAM MOULD
STANDARD: EN 12390-1, -2
BM-C75 Cast iron beam mould
The top brim is special design and avoids defacing themachined surface. Inner surface are all machined by grindmahcine.
Model No Dimension(mm) Weight(kg)
BM-C15 100×100×500 30
BM-C55 150×150×550 45
BM-C75 150×150×750 55
Model No Dimension(mm) RemarkBM-P13 100×100×300 ABS plastic
BM-P14 100×100×400 ABS plastic
BM-P53 150×150×300 ABS plastic
BM-P55 150×150×500 ABS plastic
CM-GP Plastic three gang mould
Model No Dimension(mm) Weight(kg) Remark
CM-GP70 70.7×70.7×70.7 0.9 PlasticCM-GP100 100×100×100 1.3 PlasticCM-GP150 150×150×150 2 Plastic
CM-G series three gang mouldsThese moulds are made of cast iron, steel or ABS plastic.Machined surface finished by flat grinding machine. Nodistortion during specimen preparation.
CM-GS Steel three gang mould
Model No Dimension(mm) Weight(kg) RemarkCM-GS50 50×50×50 3.5 Steel
CM-GS70 70.7×70.7×70.7 7 Steel
BM-P Plastic beam mould
These beam moulds are designed to produce accuratespecimens while avoiding distortion over the length of themould.
CM-GC Cast iron three gang mould
Model No Dimension(mm) Weight(kg)
CM-GC50 50×50×50 4
CM-GC70 70.7×70.7×70.7 7.5
CM-GC100 100×100×100 12.5
CM-GC150 150×150×150 32
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 19/83
Hardened concrete testingCONCRETE TESTING
page 20 http://www.testmould.com
BEAM MOULD(CONTINUED) GROUT FLOW
Grout flow Cone Set
Grout flow Cone Set
BM-S Steel beam mould
Model No Dimension(mm)
BM-S13 100×100×300
BM-S14 100×100×400
BM-S15 100×100×500
BM-S55 150×150×500
BM-S56 150×150×600
BM-S75 150×150×750
Beam mould: steel construction
Three gang mouldSM-C Three gang mould for prisms 40 x 40 x 160mm ismade of steel, base plate is made of cast iron. It conforms
to be above mentioned standard.The mould is used for casting specimens of cementaggregate combinations for measuring the potentialexpansive alkali reactivity.The effective gauge length is made of mild steel and hasaccurately machined faces. The parts of the moulds aretight fitting and firmly held together when assembled.Supplied complete with base plate and stainless steel orbrass smooth reference pins.
SM-C Three gang mould
Model Dimension(mm) Weight(kg) Remark
SM-C41 40×40×160 6 3 gang mould
Test set for measuring the flow of grout for preplaced,aggregate concrete. Intended for neat grout and groutscontaining fine aggregate capable of passing a No. 8sieve and grouts which have an eflux time of less than 35seconds.
STANDARD: ASTM C939, ASTM C6449
FC-13 Grout Flow Cone, 1/2" (13mm)Steel flow cone from above set, has 1/2" (13mm)replaceable orifice. Can also accommodate 3/4" (19mm)orifice, which can be purchased below. Includes adjustablepoint gauge assembly. Overall dimensions: 8" dia. x 12"H
(203 x 305mm).
FC-19 Grout Flow Cone, 3/4" (19mm)Steel flow cone from above set, has 3/4" (19mm)replaceable orifice. Can also accommodate 1/2" (13mm)orifice, which can be purchased below. Includes adjustablepoint gauge assembly. Overall dimensions: 8" dia. x 12"H(203 x 305mm).
Flow Cone StandSturdy well-constructed steel stand to support flow conesso the top is level and the cone free from vibration. Overalldimensions: 21"W x 9-1/2"D x 23"H.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 20/83
Hardened concrete testingCONCRETE TESTING
http://www.testmould.com page
21
VT-M68, VT-M101
CONCRETE VIBRATOR
VIBRATING TABLE
TX series internal concrete vibrators, using the pendulumprinciple, 3000rpm of the devices unit translates via theflexible shaft into 12,000 vibrations per minute in the pokerhead. The low output speed ensures high reliability andextended services life, can be used between two types ofdrive units (interchangeable): electrical motor and petrolor diesel engine drive units’ series, with standard pokerdiameters.
ModelNo
Diameter Vibratingfrequency
Outside Diaof FlexibleHose(mm)
Inner Diaof FlexibleHose(mm)
Length(m) Max.vibration
Force (KN)
Vibrating Amplitude
(mm)
AvailableMotor or engine
TX35 35 183 30 15 1 to 12 5.293 1.15
Electric motor,Gasoline Engine,
Diesel Engine
TX50 50 183 36 20 1 to 12 6.251 1.21
TX70 70 183 36 20 1 to 12 7.157 1.32
TX28 28 183 30 15 1 to 12 4.846 1.11
TX32 32 184 30 15 1 to 12 5.104 1.13
TX38 38 185 30 15 1 to 12 5.485 1.18
TX45 45 186 32 17 1 to 12 5.932 1.2
TX60 60 187 36 20 1 to 12 6.704 1.28
STANDARD: EN 12350-6, -7, 12390-2, 13286-50, 1354
Model: VT-M68, VT-M101
Table size: VT-M68: 600 × 800 mm,VT-M101: 1 m × 1 m
Amplitude: 0.3-0.6 mm
Vibrating frequency: 2860 vibrations/min
Power: 380 V, 1.1 kW
Model: VT-U68, VT-U88
Table size: VT-U68: 600 × 800 mm,VT-U88: 800 × 800 mm
Amplitude: 0.5 mm
Num. Of specimensfor compaction:
6pcs of 1503 mould3pcs of 1003 tri-mould
Vibrating frequency: 50 Hz
Power: 380 V, 1.1 kW
For compacting concrete specimen in the laboratoryvibrating table mounted on a steel stand, supplied withclamp assembly.
Concrete vibrator
STANDARD: EN 12390-2 – ASTM C31
C192 –AASHTO T23, T126
Vibrating table
VT-U68, VT-U88
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 21/83
CONCRETE TESTING
page 22 http://www.testmould.com
Compression and fexural testing machines
Specification
Max load capacity: 3000 kN
Measuring range: 0~3000 kNDimension of platen: 240 mm x 240 mmDistance between platens: 320 mmMax. Oil pressure: 40 MpaPower: 1.1 KWEntire machine weight: 1900 kg
COMPRESSION TESTING MACHINE Main featuresMachines to meet the requirements of•
BS 3892-3, 187, 6073-1, 6717, AS1012-9, D IN 51220 , 51223 , EN 12390-3 , -4 , -5 ,
12504-1,1354, 1521, 13161, 1338, 772-1, -6, 13286-41
Tests 200, 150 and 100 mm concrete cubes and• cylinders up to 320 x 160 mm diameterLoad pacing facility fitted as standard• Platen handling machines include BS 6073-1,• EN 772-1 specification rectangular platens.Supplied with Windows download software.•
SYE-2000 Compression testing machine
For determining the compressive and flexural strength ofconcrete, brick, stone and other building material. It loads
hydraulic pressure and is main specified of building highwayand building industry. The data is automatically output,connect with computer and easy to operate.
SYE-2000 Compression test machine SYE-3000 Compression test machine
Specification
Max load capacity: 2000 kN
Measuring range: 20~2000 kNDimension of upper platen: 240 mm x 240 mmDimension of lower platen: 300 mm x 250 mmDistance between platens: 320 mmMax. Oil pressure: 40 Mpa Accuracy: +1%Piston Dia. X Max. travel: 250 mm X 50 mmPower: 0.75 KWOverall dimension: 900 X 400 X 1360 mmEntire machine weight: 800 kg
SYE-3000 Compression testing machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 22/83
CONCRETE TESTING
http://www.testmould.com page
23
Compression and fexural testing machines
WE series Compression testing machineIt has oil cylinder put below, hydraulic loading, tested bypendulum, high precision, operate easily. It has three kindsof scale, and each has a full measure range. It can beused for the tensile, compression, bend and shear test ofvarious metal material, plastic, concrete, cement and othernonmetal material.
Model: WE-50, WE-100, WE-300, WE-300B, WE-600B,
WE-1000B
COMPRESSION TESTING MACHINE(CONTINUED)
Code WE-50 WE-100 WE-300
Max load capacity: 50 100 300
Measuring range:0-100-200-50
0-200-500-100
0-600-1500-300
Graduation Unit of Gauge(kN):0-10: 0.020-20: 0.050-50: 1.0
0-20: 0.050-50: 0.10-100: 0.2
0-60: 0.20-150: 0.50-300: 1.0
Accuracy of Value Displayed: ±1% ±1% ±1%
The Max.Distance Between FlexibleClips(mm):
0-600 0-600 0-750
Distance Between Two Props instretdingTest(mm):
400 400 530
Clipping Thickness and The Max. With ofFlast Sample(mm):
15×14 15×40 15×75
Distance Between Upper Lower Plates(mm): 0-250 0-250 0-300
Distance Between Two pull-rods inCompression Test(mm):
284 284 364
Distance Between Two Fulcrums of BendingTest(mm):
30-600 30-600 100-1000
Circular Sample Clipping Diameter(mm): φ4-16 φ6-22 φ10-32
Size of Upper and Lower Plates(mm): φ100 φ100 φ120
Power of Motor(mm): 0.75 0.75 1.5
Contour Size of Main Engine(IncludingPiston Travel) (mm):
750×650×2495 750×650×2495 1200×580×3185
Contour of Dynamometer(mm) 1010×685×1490 1010×685×1490 1040×860×1820
WE series Compression testing machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 23/83
CONCRETE TESTING
page 24 http://www.testmould.com
Compression and fexural testing machines
COMPRESSION TESTING MACHINE(CONTINUED) WE-300B Compression test machine
Code WE-300B WE-600B WE-1000B
Max load capacity: 300kN 600kN 1000kN
Test Force showed
the value of relative
error:
≤±1% ≤±1%≤±1%
Resolution: 0.01kN 0.01kN 0.01kN
Drawing Space: 600mm 600mm 600mm
Crush: 380mm 380mm 380mmClamp mode: Manual intensify Manual / Auto to step up Manual
Clamping diameter ofround specimen:
φ10-32mm Φ13-40mm Φ14-45mm
The thickness of theflat plate specimen:
0-15mm 0-30mm 0-40mm
Shear specimendiameter:
10mm(Alternative) 10m(Alternative) 10mm
The upper and lowerplaten size:
φ160mm( Alternative 204×204mm) φ160mm( Alternative 204×204mm)φ160mm(Replacement of the 204 × 204mm)
The maximumdistance between thecompressed sides:
600mm 600mm 600mm
Pump Motor Power: 1.1kW 1.1kW 1.1kW
Beam moves up anddown motor power:
0.75kW 0.75kW 0.75kW
Host Dimension mm: 650×600×1900 700×600×1950 800 × 600 × 2100
Weight: 1900Kg 2100Kg 2600Kg
Used for a variety of metal materials, tensile, compression,bending and shear tests can also be used as plastic,
concrete, cement and other non-metallic materials,compression tests, increasing simple accessories tocomplete tape chain, wire rope, welding rod, tile, and avariety of component performance tests. The machineis mounted under the cylinder, a low profile, light weight,especially for construction sector.
The control system:1. Electronic measuring, liquid crystal display pilot force -time curve, test power, test power peak, with significantyield characteristics of the material yield strength, theexperimental data easy and intuitive;2, a digital health input sample number, cross-sectionalarea can be the direct determination of the material tensile
strength, yield strength and other mechanical properties;3, experimental results can be printed.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 24/83
CONCRETE TESTING
http://www.testmould.com page
25
Compression and fexural testing machines
PROVING RINGS
The proving ring is 0.3 (3/1000) level standard “the Valueof Pressure" measuring instruments. It is mainly used for
verification and calibration about material testing Machines,compression testing machine and other measuringinstruments, equipment. It is also used for other relevantinstruments, equipment, spare parts, components "forcevalue" measurement.
No.Max load(Kn)
Type Load MeasuringDimension(mm)(LxWxH)
N.W.kg
Image
1 0.1 EHB-01
push 125×40×170
0.60
2 0.2 EHB-02 0.63
3 0.3 EHB-03 0.64
4 0.6 EHB-06 0.67
5 1 EHB-1 0.71
6 1.5 EHB-1.5 0.74
73
EHB-3 pull-push 200×110×210 2.1
8 EHB-3A push 200×110×190 1.9
9
6
EHB-6 pull-push 200×110×210 2.4
10 EHB-6A push 200×110×190 2.1
11 EHB-6B Special for bending tester 200×110×350 3.1
1210
EHB-10 pull-push 210×110×215 3.6
13 EHB-10A push 210×110×200 3.1
14 30 EHB-30 pull-push 210×115×230 4.6
15 EHB-30A push 210×115×200 3.7
16 60 EHB-60 pull-push 210×115×230 6.1
17 EHB-60A push 210×115×200 5.1
18 100 EHB-100 pull-push 210×130×250 7.2
19 EHB-100A push 210×130×230 7.5
20 300 EHB-300 pull-push 225×160×335 13.3
21 EHB-300A push 225×160×235 10.8
22 600 EHB-600A 250×195×250 20.3
23 EHB-600B 165×150×205 6.5
24 1000 EHB-1000A 270×205×270 31.0
25 EHB-1000B 170×160×225 9.826 2000 EHB-2000A 220×180×260 22.1
27 3000 EHB-3000 240×180×305 29
28 5000 EHB-5000 270×195×360 51
The proving ring is a device used to measure force.It consists of an elastic ring of known diameter with ameasuring device located in the center of the ring.
Proving rings come in a variety of sizes.They are made of asteel alloy. Manufacturing consists of rough machining fromannealed forgings, heat treatment, and precision grinding tofinal size and finish.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 25/83
Soil testingSOIL TESTING
page 26 http://www.testmould.com
SOIL SAMPLING
Hand auger set are suitable for hand-boring in cohesivesoils or sands and gravels, above the water table to a depthof 5 or 6 metres.
STANDARD: ASTM D420, D1452 / AASHTO T86,
T202 / CNR a. VI n. 25
Soil Auger Heads are constructed of heavy duty steel platesforming an open tube partly interlocking at the cutting end.Two diameters are available 100 mm or 150 mm.The Gravel Auger Head comprises a one piece steel castingwith a spiral point and two clap plates designed to closewhen lifting samples from the borehole. Its diameter is 150mm.
The auger heads is connected to Extension Rodsconstructed of steel tubing 1 metre long. A Handle withT-piece is attached to the uppermost extension rod.
HAND AUGER SET
SOIL AUGER
Hand auger set
Model Description
16-T0006/A Hand auger head 100 mm dia.
16-T0007/A Hand auger head 150 mm dia.
16-T0008/A Spiral soil auger head 25 mm dia.
16-T0008/BDutch soil auger head, Edelman model,
70 mm dia., for soft fine soils
16-T0010/6 steel tube dia. 38x230 mm
Accessories
16-T0005/1 "T" handle
16-T0005/2 Extension rod 1 m length
16-T0005/3 Chisel
YZ-1 Sampling equipment to take undisturbed
soil sample.
YZ-1
Each item can be ordered individually.
Spare parts
Bulldozer
Drill pipe: metal struction with scale
Drill cylinder: 100ml
Specimen cup: 100ml
LX-1 Spiral soil auger
Model: LX-1
Auger head: Φ50mm x 200mm
Drill pipe length: 5m
Weight: 16Kg
Drill pipe with scale
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 26/83
Soil testingSOIL TESTING
http://www.testmould.com page
27
SOIL SAMPLE RINGS AND CONTAINERS
Soil sample rings are stainless steel rings made of seamlesstubes, smooth inside and out. The bottom of the ring has a
cutting edge.
ModelDimensions
mmCapacity
cm3
NS-09 ¢79.8×20 50
NS-10 ¢61.8×20 30NS-11 ¢50.4×50 100
NS-12¢50.4×50
as a complete set100
NS-13 ¢70×52with Stainless Steel Caseback
200
NS-14 ¢61.8×40 200
ModelDimensions
mmRemark
QL1-A ¢70 ×38mm big size and additional thickness
QL1-B ¢55 ×28 middle size and additionalthickness
QL1-C ¢40 ×20 small size and additional thickness
Stainless steel soil sample rings
NS09,NS10,NS11,NS12,NS13,NS14
Aluminum Soil Sample Containers
QL1-A, QL1-B, QL1-C
Soil sample rings and containers
STANDARD: ASTM D4318/BS1377:2
The Liquid limit device is used to determine the moisturecontent at which clay soils pass from a plastic to a liquidstate.
Different models are available conforming to the variousspecifications in use. They are identical in shape anddifferent generally according to type of base and cupweight. We can supply two versions: hand operated andmotor operated.
LIQUID LIMIT DEVICE
Grooving tools
Spare parts
Removable brass cup, spare cup with roughenedsurface for use with low plasticity sandy soils.
Adjustable crank and cam mechanism
Blow counter and base
Grooving tools, to be ordered separatedly.
Motor operated model liquid limit device
22-T0031/E Motor operated model
22-T0031/E Motor operated model liquid limit
deviceNet weight: 6.2 kg
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 27/83
Soil testingSOIL TESTING
page 28 http://www.testmould.com
PLASTIC LIMIT TEST SET
SAMPLE REDUCTION
STANDARD:
ASTM D4318 / AASHTO T90 / BS 1377:2
UNE 103-104 / UNI 10014 / NF P94-051
STANDARD:
BS 1377:2/ ASTM D421
Each item can be ordered individually.
Accessories
Plastic limit plate 300×300 mm
Stainless steel rod 3 mm dia
Mixing dish 120 mm dia
Moisture tin 75 mm dia. ×30 mm
22-T0041 Plastic limit test set
Mortar and pestleThe ceramic mortar & pestle are used to gently crushindividual particles for chemical tests.
22-T0041 PLASTIC LIMIT TEST SET
TPM series Mortar and pestle
Model Diameter(mm)TPM-60 60
TPM-80 80
TPM-100 100
TPM-130 130
TPM-160 160
TPM-216 216
TPM-254 254
TPM-305 305
RIFFLE BOXES (SAMPLE DIVIDERS)
For the rapid preparation of samples, i.e. division intotwo representative portions. Detailed below is a range ofdividers, each constructed of heavy gauge sheet metal, withparticular attention given to reinforcement of the partitionsto maintain the accuracy of the slot dimensions.The units offered are supplied in a range of sizes from 7 mmto 64 mm slots.
STANDARD:
EN 932-1, 932-2 – ASTM C702
ModelMax. size
sample(mm)BS EN
Slotwidth(mm)
No. ofslots
ApproxCapacity
EL23-3000 4.5 3.5 7 12 0.3EL23-3050 8.5 6.5 13 12 2.0
EL23-3070 10.0 7.5 15 12 2.0
EL23-3100 12.5 9.5 19 10 4.0
EL23-3150 16.5 12.5 25 10 4.0
EL23-3170 20.0 15 30 10 4.0
EL23-3200 25.0 19 38 8 11.0
EL23-3300 33.0 25 50 8 14.0
EL23-3350 42.5 32 64 8 18.0
EL23 series riffle box
EL23 series riffle box exploded view
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 28/83
Soil testingSOIL TESTING
http://www.testmould.com page
29
EXTRUDERS
STANDARD:
ASTM D698, D1587, D1883, BS 598:107, 1377:4, 1924:2
For stripping the cylinder specimen of asphalt mixtures fromthe mold without destruction.
Model: CTE-H
Capacity: 5 tons maximum
Soil specimen: Dia.102 × 116, Dia.152 × 116 mm
Bituminous mixmaterial specimen:
Dia.101.6 × 87 mm
Materia stabilizedwith inorganic :
Dia. 50 × 50, Dia. 100 × 100Dia. 150 × 150
Weight: 47 Kg
Hydraulic extruder
Electric extruder
Model: CT
Mold dimensions:
Soil specimen: Dia. 102 x 116 mm,Dia. 152 x 116
Bituminous mixmaterial specimen:
Dia. 101.6 x 87 mm
Material stability
with inorganicbinders:
Dia. 50mm × 50mm,
Dia. 100mm × 100mm,Dia. 150mm × 150mmMaximum axialcapacity:
150 KN
Maximum travel: 250mmSpeed forward/ reverse:
170mm/min.
Power supply: 380V 50Hz
Input power: 1100 W
The Ejector is used for ejecting the specimen made ofbituminous mix material and the material stabilized with
inorganic binders etc. It can quickly eject the specimen fromthe mold and easy to operate.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 29/83
Soil testingSOIL TESTING
page 30 http://www.testmould.com
LABORATORY MIXER
This mixer is designed to mix mortars and cement pastesto the requirements of the above standards.The mixingpaddle has a planetary motion and is driven by a motor witha microprocessor based speed and program controller.The mixer can be operated either in an automatic or manualmode.When the mixer is used in the manual mode, thetwo mixing speeds can be changed by means of a rocker
switch, without switching off the motor. In the automaticmode any one of the pre-set mixing programmes may beselected.
STANDARD:
BS 1337/2, NF P94-052,1
CONE PENETROMETER
MODEL: LB-160B
Power: 230 V, 50 Hz, 1 ph.Width of mixing blade: 135 mm
Mixing bowl capacity: 5 LRotation speed of mixingblade revolution(r/min):
low: 140±5 62±5 high: 285±10 125±10
Net weight(approx): 70 kg
CT-M Penetrometer
STANDARD:
BS 3892-1, 3892-3, 6463-103, 4551-1, ISO 679,
EN 196-1, 196-3, 413-2, 459-2, 1744-1, 13279-2, 1015-2,
13395-1,13454-2
LABORATORY MIXER
LB-160B LABORATORY MIXER
Cone Penetrometer
The Cone Penetrometer test method for Liquid Limit isbased on the relationship between the moisture content andthe penetration of a cone into a soil sample.
Comprising
a cast aluminum base
150mm dia. dial with 0.1mm subdivisionscalibrated cursor
automatic zeroing device
release button
micrometric displacement device
penetration test cone and two sample brass cups
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 30/83
Soil testingSOIL TESTING
http://www.testmould.com page
31
SAND REPLACEMENT COMPLETE SET
This equipment is used to determine the dry density of in-situ soils. Apparatus is included which satisfies BS, ASTMand AASHTO specifications.
STANDARD: BS 1377, 1924
SR-100 Sand replacement complete set
Sand Replacement Pouring Cylinder 100 mmCalibration Container 100 mmTray with 100 mm central hole, 300 mm square, galvanised steel
SR-150 sand replacement complete set
Sand Replacement Pouring Cylinder 150 mm
Calibration Container 150 mm
Tray with 150 mm central hole, 300 mm square, galvanised steel
SAND DENSITY CONE APPARATUS
ASTM STANDARDS
35-T0129Sand Cone apparatus 6 inch(152 mm)5 litre plastic container for sand cone
Base plate with 6.5 inch(165 mm) diameter hole
SR-200 Sand replacement complete set
Sand Replacement Pouring Cylinder 200 mmCalibration Container 200 mm calibrate density of sandflowing from the cylinder.Tray with 200 mm central hole, 500 mm square, galvanised steel
Sand Replacement Pouring Cylinder
35-T0129
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 31/83
Soil testingSOIL TESTING
page 32 http://www.testmould.com
PROCTOR MOULDS
Used for determining the relationship between the moisturecontent and density of compacted soil. Made of plated
steel. Includes collar, mould body and base plate.Different models are available conforming to the variousspecifications in use. They are identical in shape and slightlydiffer in diameter and capacity.
ASTM PROCTOR MOULDS
PROCTOR RAMMERS
Used to compact the soil sample in the Proctor moulds.Made of plated steel. Guide sleeve with vent holes.Different models are available conforming to the variousspecifications in use.
EN PROCTOR RAMMER
ASTM PROCTOR RAMMER
ModelDiameter ofbase mm
Free fallheight mm
Weightapprox. kg
33-T0075/E 50.0 ± 0.05 305 ± 3 3.6
33-T0076/E 50.0 ± 0.05 457 ± 3 6.3
ModelRammermm dia.
Free fallheight mm
Weightapprox. kg
33-T0075 50.8 305 3
33-T0076 50.8 457.2 5.3
ASTM proctor moulds and EN rammers
CBR MOULDS AND ACCESSORIES
STANDARDS: ASTM D1883; AASHTO T193
A range of moulds and accessories specifically designedto meet the requirements of the relevant standards. The
equipment is manufactured from high quality, long-lastingmaterial and with regular maintenance will give years ofsatisfactory performance.
ModelInt. dia.
mmInt. height
mmWeight approx. kg
33-T0070 101.6 116.4 5.1
33-T0071 152.4 116.4 7.5 Model Description
34-T0090CBR mould complete with collar and perforated baseplate. Plated steel, 6 in. (152.4 mm) dia. x 7 in. (177.8mm) body height
34-T0091Spacer disc with "T" handle.515/16 in. dia. (150.8 mm) x 2.416 in. (61.4 mm) high
34-T0094 Annular surcharge weight, 2.27 kg
34-T0095 Slotted surcharge weight, 2.27 kg
34-T0098 Cutting edge
34-T0097 Solid CBR base
34-T0099 Straight edge. 3x30x300 mm
ASTM CBR Mould
ASTM, AASHTO, UNE, UNI, CNR version
34-T009034-T0091
34-T0094
34-T0098
34-T0097 34-T0095
34-T0099
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 32/83
Soil testingSOIL TESTING
http://www.testmould.com page
33
CBR TEST MACHINE
CBR Test Apparatus is suitable for test of soils and mixmaterials (the grain size of the soil is less than 40mm)compacted with CBR mold so as to confirm the bearingloading ability of pavement, roadbed subcrust as well asmaterial layer of the roadbed to be designed. It consists ofa twin column frame, proving ring, penetration bar, loadingplate, micrometer, measuring device for swell increment etc.and easy to operate.
CTM-01 CBR Test Machine
CBR Test Machine
PLATE BEARING TEST APPARATUS
STANDARD:
ASTM D1194, D1195, D1196 – BS 1377:9 –CNR NO. 92 AND
NO. 146 – DIN 18134
These test methods are used to estimate the bearingcapacity of a soil under field loading conditions for aspecific loading plate and depth of embedment (ASTMD1194) but also for load tests of soil and flexible pavementcomponents for use in evaluation and design of airport andhighway pavements (ASTM D1195, D1196; BS 1377; CNRNo. 92 and No. 146; DIN18134). We propose a completerange of plate load testing equipment conforming to thedifferent standards.
The apparatus can be easily converted conforming tomethod "b" - three dial gauges-removing the housing forcentre dial gauge anvil and requiring other two dial gauges30x0.01 mm with two dial gauge supports.
CTK-3 Plate bearing test apparatus
Model: CTM-01
Capacity: 30 KN, 50KN (selectable)
Load speed: 1.0 mm/minPenetration bar: dia. 50 mm x 100 mm
Platen: dia. 170 mm
Platen travel: 50 mmMold: dia. 152 mm x 170 mm
Dimension: 310 x 310 x 930 mmWeight: 100 Kg
Model: CTK-3
Load plate diameter: 300 mmJack load capacity range: 0-100 kN
Jack Stroke: 160 mm
Measuring bridge span: 3000 mmHand pump rated pressure: 60 MpaStress test range: 0-25 MpaDisplacement measurement range: 0-10 mm
STANDARD:
BS 1377, 1924; EN 13286-47;ASTM D1883; AASHTO T193
Plate bearing test apparatus
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 33/83
Soil testingSOIL TESTING
page 34 http://www.testmould.com
DYNAMIC PENETROMETERS
Penetrometers are used to establish the thickness ofdifferent stratifications when investigating the suitabilityof a site for bridge, road and other construction works.In general if the ground is not too compact, penetrationtests with the lightweight penetrometer can be carried outto depths of about 8 to 12 m. This apparatus is suppliedcomplete with No. 11 sounding rods, No. 1 grooved rod, No.2 drive points 90°:500 and 1000 mm2, lifting device for sounding rods,couplings and carrying case.
Heavyweight dynamic penetrometer.
Hand operatedTP-P2
Weight of hammer: 63.5 Kg
Lightweight dynamic penetrometer.
Hand operated
TP-P1 Lightweight dynamic penetrometer.
Weight of hammer: 10 Kg
Drop height: 500 mm
Max. penetration depth: 6000 mmPenetration rammer extent: 60°Penetration rammer anglemax. diameter:
40 mm
STANDARD:
DIN 4094
Left: TP-P1; Right: TP-P2
AUGER POWER HEAD
Used in conjunction with sampling tubes to obtain disturbedor undisturbed samples of soils. The augers are not includedand have to be ordered separately. (See accessories)
ModelDrilling hole dia(mm)
Drilling hole depth(mm)
Weight(kg)
APH-01 30, 40, 50, 60 500-700 11-12
APH-02 80, 95 500-700 14-15
APH-03 120, 150, 180,
200, 250, 300
500-700 14-22
APH-03 auger power head
Auger power head
Accessories for both models
Auger:30, 40, 50, 60, 80, 95, 120, 150, 180, 200, 250, 300mm dia.selectable;500, 650, 700, 800, 900, 1200, 1400mm length selectable.
Note: It can be equipped with different diameter andlength of augers according to the user's requirements.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 34/83
Soil testingSOIL TESTING
http://www.testmould.com page
35
CONSOLIDATION TEST UNIT
WG-1C Triplex Consolidation Apparatus is used forcompression test of soil, and to determine the relationshipbetween deformation and compression of soil, to calculatethe unit sediment compression index, resilient index, as wellas consolidation coefficient of soil, etc.
STANDARD:
ASTM D3080, BS 1377:7, AASHTO T236
NF P094071-1/2
Model: WG-1C
Frame: Steel structure
Sample area: 30 cm² or 50 cm²
Sample'squantity:
Three
Lever ratio: 12: 1 (mid and low pressure)Consolidationcontainer:
One beam, two beams, three beams
Pressurerange:
12.5 kpa/30cm² to 800 kpa/50cm²,12.5 kpa/30cm² to 400 kpa/50cm²
Grade: Grade 8, grade 7Loadlevel(kpa):
12.5, 25, 50, 100, 200, 300, 400, 800,1600, 3200
Model: GDG-4S
Sample area: 30 cm² or 50 cm²Sample's quantity: Three
Pressure range: 12.5~3200kpa, 12.5~1600kpaGrade: 10, 9 gradeLoad level(kpa): 12.5, 25, 50, 100, 200, 300, 400, 800,
1600, 3200
Model: WG-1B
Sample area: 30 cm² or 50 cm²Sample's quantity: Three
Pressure range: 12.5~160kpa, 12.5~800kpaGrade: 9, 8 gradeLoad level(kpa): 12.5, 25, 50, 100, 200, 300, 400, 800,
1600, 3200Triplex Consolidation Apparatus
Model Weight (Kg)NS-15-5.1 5.1NS-15-2.55 2.55NS-15-1.7 1.7NS-15-1.275 1.275NS-15-0.85 0.85NS-15-0.637 0.637NS-15-0.425 0.425NS-15-0.319 0.319NS-15-0.212 0.212
Weights for Consolidation Test or
Drectly Shear Test soil test
Weights for Consolidation Test or Directly ShearTest
GDG-4S Triplex Consolidation Apparatus
WG-1B Triplex Consolidation Apparatus
WG-1C Triplex Consolidation Apparatus
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 35/83
Soil testingSOIL TESTING
page 36 http://www.testmould.com
Model: WG-4
Sample area: 30 cm²Lever ratio: 1:20Pressure range: 12.5~400kpaWeight: 20 Kg
Model: YYW-2
Max. axial load: 0.6 KNDiameter of remolding cylinder: Ф39.1 mmSample dimension: Ф39.1×80 mmJourney of the rotate wheel liftbridge in a circle:
0.2 mm
Rate: 2.4 mm/min
The longest journey of the ratatewheel lift bridge: 30 mm
Weight: 110Kg
CONSOLIDATION TEST UNIT(CONTINUED)
Single Consolidation Apparatus
Features: Small in size, lightweight, suitable for use on thespot.
KO Consolidation Apparatus(include pull rod)
Full Automatic Pneumatic ConsolidometerFeatures: computer-controlled, print curve chart
Strain Controlled Unconfining Compression
ApparatusIt is usde to determine the unconfined compressivestrength and the sensitivity of soft clay of stronger
saturation.
WG-4 Single Consolidation Apparatus
GJY KO Consolidation Apparatus
GDZ-1
YYW-2
Sample dimension: Ф61.8×40 mm Axial load: 6KNLoad arm: 0KPa-1000KPa Axial movement: 0-10mmWork temperature: 20oc±5oc
Relative humidity: <85%Relative error of proving ring: ±2%
Model: CJY
Low Mid. pressure:Relative error:
0~1600Kpa≤100KPa±1
High pressure:Relative error:
0~3200Kpa≤100KPa±1
Zero precision: ≤1.0KpaLoad time <1 secondMeasure range of Sensor:Resolution:Precision:
10mm<2.5um≤0.2%F.S
Model: GZQ-1
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 36/83
Soil testingSOIL TESTING
http://www.testmould.com page
37
DIRECT SHEAR TEST MACHINE
TP-ES Electric shear test machine
TP-DS Digital shear test machine
STANDARD:
ASTM D3080, BS 1377:7, AASHTO T236
NF P094071-1/2
Model: TP-ES
Soil sample area: 30 cm2
Lever ratio: 1:12
Vertical Loading (kpa): 50, 100, 200, 300, 400Max. horizontal loading: 1.2 kNShear rate: 0.8 mm/min, 2.4 mm/min
Model: ZJ,DSJ-3(quadruplet)Vertical load: 100KPa. 200KPa, 300KPa
400KPaLever ratio: 1:12Shear box quatity: 4Level shear force: Max. 1.2KNSample area(cm): 30 x 2 HRate(mm/min): 2.4, 0.8, 0.1, 0.02Power: <100WPower source: 220V±10%, 50HzDimension(mm): 680 x 740 x 1050(LxWxH)Weight: 200 Kg
MODEL: TP-DS
Soil sample area: 30 cm2
Lever ratio: 1:12
Vertical Loading (kpa): 50, 100, 200, 300, 400Max. horizontal loading: 1.2 kNShear rate: 0.8 mm/min, 2.4 mm/min
Model: ZJ,DSJ-3(quadruplet)
To determine the shearing strength of the soil using thedirect shear apparatus.
In many engineering problems such as design of foundation,retaining walls, slab bridges, pipes, sheet piling, the valueof the angle of internal friction and cohesion of the soilinvolved are required for the design. Direct shear test isused to predict these parameters quickly. The laboratoryreport cover the laboratory procedures for determiningthese values for cohesionless soils.
Strain controlled direct shear machine consists of shearbox, soil container, loading unit, proving ring, dial gauge tomeasure shear deformation and volume changes. A twopiece square shear box is one type of soil container used.
A proving ring is used to indicate the shear load taken bythe soil initiated in the shearing plane.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 37/83
Soil testingSOIL TESTING
page 38 http://www.testmould.com
Model: ZJ, ZQB-4 (light weight and portable)
Model: AS-1 (Cross board)Model: ZYY-3
Soil sample area: 30cm2
Vertical load: 5 0KP a,10 0KP a . 200 KP a ,300KPa, 400KPa(hanger is firstgrade)
Lever ratio: 1:20Level shear force: Max. 1.2KNSample area(cm2 ): 30Power source: 220V±10%, 50HzDimension(mm): 850 x 550 x 1100(LxWxH)Weight: 40 Kg
Cross board dimension: Ф75×150 mm,Ф50×100 mmSteel ring torsion: 80N mTorsion accuracy: 0.55N mGuide rod: Ф30 1040mmDimension(mm): 430 x 910 x 220 (LxWxH)Weight: 40 Kg
Vertical load: 40 0KPa,30 0KPa. 200KPa,100KPa, 50KPa
Lever ratio: 1:12Max load: 1.2KNSample area(cm2 ): 30Soil sample containerquantity:
12, sample 36 at the same time
Dimension(mm): 760 x 880 x 1100(LxWxH)Weight: 220 Kg(include weigths
Model: ZJ, ZQB-4(light weight and portable)
Model: AS-1Model: ZYY-3
DIRECT SHEAR TEST MACHINE(CONTINUED)
Model: ZJ, EDJ-1, SDJ-2(twp-speed and three-speed)
Model: ZJ, EDJ-1, SDJ-2 (Electric,twp-speed and three-speed)
Vertical load: 5 0KP a,10 0KP a. 2 00KP a ,300KPa, 400KPa
Lever ratio: 1:12Level shear force: Max. 1.2KNSample area(cm2 ): 30Power source: 220V±10%, 50HzDimension(mm): 850 x 550 x 1100(LxWxH)Weight: 40 Kg
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 38/83
Soil testingSOIL TESTING
http://www.testmould.com page
39
Model: TSZ10-1.0
Sample dimension: Ф39.1×80 mm
Max load: 10KnStrain rate: 0.016-1.6mm/min.
six-speed mechanicaltransmission
Table stroke: Max. 50mmConfining pressure: 0-1MpaBack pressure: 0-0.6MpaHole pressure: 0-1MpaVolume change:
Graduation:
0-25ml
0.1ml Axial displacement: 0-30mmPower: 220V±10%, 50HzMachine dimension: 350 x 300 x 1100 (LxWxH)Controller Dimension(mm): 500 x 500 x 925 (LxWxH)Weight: 170 Kg
Model: TSZ30-2.0
Sample dimension: Ф39.1×80 mm,Ф61.8×125 mmMax load: 30KnStrain rate: 0.0024-4.5mm/min.
sixteen-speed mechanical
transmissionTable stroke: 0-90mmConfining pressure: 0-1MpaBack pressure: 0-0.6MpaHole pressure: 0-1MpaVolume change:Graduation:
0-25ml0.1ml
Axial displacement: 0-30mmPower: 220V±10%, 50HzMachine dimension: 350 x 300 x 1100 (LxWxH)
ControllerDimension(mm):
500 x 500 x 925 (LxWxH)
Weight: 175 Kg
Model: TSZ-1, TSZ-1A, TSZ-2, TSZ-6
Sample dimension: TSZ-1,TSZ-1A:Ф39.1×80 mm,TSZ-2:Ф39.1×80 mm, Ф61.8×25 mmTSZ-6:Ф39.1×80 mm,Ф61.8×25 mm,Ф101×200 mm
Shearing rate: 0.0001-2.4mm/min.0.0001-4.8mm/min
Confining pressure: 0-2MpaBack pressure: 0-2Mpa,
TSZ-1A without back pressureHole pressure: 0-2.0MpaVolume change:Graduation:
TSZ-1, TSZ1A, TSZ-2: 0-50mlTSZ-6: 0-100ml
Axial displacement: 0-30mm Axial load: TSZ-1, TSZ-1A: 0-10KN
TSZ-2: 0-30KN, TSZ-6: 0-60KN
Model: TSZ10-1.0
STRAIN CONTROLLED TRIAXIAL TEST APPARATUS Full-automatic Strain Controlled Triaxial Test Apparatus
TSZ-1A
TSZ-2
TSZ-6
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 39/83
Soil testingSOIL TESTING
page 40 http://www.testmould.com
STANDARD: BS 1377:3, ASTM D1067
PH METERS
TP-601A pH meter
TP-6022 PH meter
TP-6658 Ph meter
Model: TP-601A
Display: LCD, size : 20 mm x 27 mm. Consumption
Measurement Range: pH 0 to 14 pHResolution: pH 0.1 pH.
Accuracy: pH -/+0.1 p After calibration. pH 4.01, pH6.86 and pH 9.18, Three Point Calibration
pH Calibration: pH 4.01, pH 6.86 and pH 9.18, Three PointCalibration
Temp. Display: 0.1oCTemp. Accuracy: 1oCWorking Temp. Range: 0 ~ 50oC ATC: 0 ~ 100oCDimension: 188 x38 mm * Meter with pH electrode.Weight: 82 g (electrode included).
Model: TP-6022
Display: LCD, size : 20 mm x 27 mm. Consumption
Measurement Range: pH 0 to 14 pHTemp. 0 to 50 oC ( 32 to 122 oF ).
Resolution: pH 0.01 pH.Temp. 0.1 oC/ 0.1 oF.
Accuracy: Accuracy pH+/- 0.02 p After calibration.Temp. +/- 0.8 oC/ +/- 1.5 oF.
pH Calibration: pH 6.86, pH 4.01 or pH 9.18, 3 pointscalibration.
Operating Humidity: Less than 80% RH.Dimension: 88 x38 mm * Meter with pH electrode.Weight: 82 g (electrode included).
Model: TP-6658
Power supply: AC 220V(160-250V)50Hz
Power unit: <5W Accuracy: 0.01PH 1mVMeasurement range: 0~14PH -999mV~999mVSet point: 2
Environmental temperature: 0~50oCDisplay: Four-level LED LCD instructionsEnvironmental humidity: 35-85%RHParameters preservation: 10 yearsOutput model: ON/OFF 4~20mA Output capacity: Output capacity
AC 250v/3A DC30V/3A Input impedance: >1012ΩInsulation R: >10MΩSize: 96mmX96mmX120mm
pH meter is an electronic instrument used to measurethe pH (acidity or alkalinity) of a liquid (though specialprobes are sometimes used to measure the pH of semi-solid substances). A typical pH meter consists of aspecial measuring probe (a glass electrode) connected toan electronic meter that measures and displays the pHreading.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 40/83
Asphalt testing ASPHALT TESTING
http://www.testmould.com page
41
CENTRIFUGE EXTRACTORS
STANDARD: EN 12697-1 CLAUSE B.1.5
ASTM D2172, AASHTO T164A
AUTOMATIC EXTRACTION APPARATUS
STANDARD: EN 12697-1, DIN 1996,
ASTM D2172, CNR A. VII NO. 38
Used for the separation and extraction of bitumen byuse of solvent and sieving, for the separation of filler bycentrifuge action and for the recovery of solvent material.The complete cycle is carried out automatically.
The centrifuges are used for the determination of bitumenpercentage in bituminous mixtures. All models comprise a removable precision-machined rotorbowl housed in a cylindrical aluminium box.The rotating unit is suspended on the base by fourcalibrated springs, which assure a perfect stability all overthe test. The cover is precisely machined and fitted withsolvent resistant gasket to avoid leakages. All models arefitted, for emergency use, by a hand brake system. Thecontrol panel includes: Start/Stop button, speed controlknob.
AE-CT5 Automatic extraction apparatus
AE-SYV Automatic extraction apparatus
CE-3000 Centrifuge extractor CE-1500 Centrifuge extractor
Model: CE-1500, CE-3000 Centrifuge extractor
Voltage: 220 v±10%Speed adjustable range: 3000 r/minPower of motor: 370 w-550 wMax weight of specimen: 1500 g and 3000 gOrifice ring capacity: 4200 mlDimension of filter-paperExternal diameter: 295 mmInternal diameter: 95 mm
Model: AE-SYV Automatic extraction apparatus
Capacity: 1000 g-2000 g
Accuarcy: <0.1%
Take out and lift time: 20-40 min/each time
Reclaim menstrumm automatically, reclaim rate >95%
Voltage 380 V±10%
Motor power: <5 kw
Net weight: 300 Kg
Dimension: 1450×660×1580mm
Model: AE-CT5 Automatic extraction apparatus
Working voltage: 380 v±10%Motor power: 1.5 kW
Each times take out and lift time: 40 minEach times take out and lift requiremenstruum:
10L
Acentric machine specimen cup: Dia.120 mm
Centrifuge extractor Automatic extraction apparatus
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 41/83
Asphalt testing ASPHALT TESTING
page 42 http://www.testmould.com
ELECTRIC COMPACTOR
This equipment is used for the preparation specimens forMarshall stability testing in compliance to BS 598 standard.
The Digital controlled Marshall Electric Compactor issuitable for preparing bituminous mix specimens (dia.101.6mm x 63.5mm) used in Marshall stability testing. Thetrip mechanism is designed to make the hammer fall atthe same distance for every stroke. With some featuresof digital control, stroke times to be preset freely, autocounting and easy to operate etc.
Marshall compactor
EDC-2 Marshall compactor
MODEL: EDC-2
Hammer weight: 4.536Kg±0.009 Kg
Hammer head: dia. 98.5 mm
Drop: 457.2mmStroke frequency: 60 stroke times per minute
Dimension: 540 x 500 x 2000mmWeight: 90Kg
EDC-1 Multifunctional compactor
Multifunctional compactor
MODEL: EDC-1
Heavy-duty compacting test: hammer weight 4.5kgdrop height 450mm
Light-duty compacting test: hammer weight 2.5kgdrop height 300mm
Specimen cylinder dia.: dia. 100,152 mm
Hammer head dia.: dia. 50 mmCompacting number: 30 times/minEngine: 370 W, 380 V, 1400 r/minDimension: 650×400×1320 mmWeight: 130 Kg
It is suitable for the foundation engineering constructionsuch as water conservancy dam, traffic, railway, airportand building etc. With standard compaction method todetermine the relationship between density and water ratio,then confirm the dry density and moisture content of soil.It could satisfy the specimen preparation requirements ofCBR tests and resilience modulus tests. It could providesand module and spodosol module of dia. 152 and dia. 100It could perform light compaction and heavy compaction.With perfect designation, it has lots of specialties such asdigital display, auto number and auto circulation etc.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 42/83
Asphalt testing ASPHALT TESTING
http://www.testmould.com page
43
LOS ANGELES ABRASION MACHINE
Los angeles abrasion machine
STANDARD:
EN 1097-2, ALSO CONFORMING TO NF P18-573, UNE 83
114, UNI 8520-19, CNR NO. 34,
ASTM C131
EL42-5305/01 Los angeles abration machine consists ofa rolled steel drum having an inside diameter of 711 mmand internal length 508 mm. The drum is rotated by aspeed reducer driven by an electric motor at a speed ofbetween 31 and 33 r.p.m. The machine is equipped withan automatic counter, which can be preset to the requirednumber of revolutions of the drum. The unit is supplied
without the abrasive charge, which has to be orderedseparately depending on the standard in use.
Abrasive charges: Set of 12 abrasive charges
conforming to ASTM/UNI/CNR Standards;Set of 11 abrasive charges conforming to EN
Standards
GYRATORY COMPACTOR
STANDARD: NT BUILD 427
GCF-150 Gyratory compactor
Model: GCF-150
Vertical load: continuously adjustablefrom 100 to 1000 Kpa
Pressure accuracy: <±60 Kpa
Number of compaction: from 1 to 5
Number of gyratory: adjustable up to 500
Gyratory compact ion angleaccuracy:
<0.02°
Gyratory compactiondisplacement range:
0-300 mm
Gyration rate: 30±0.5 cycles/minMotor nominal speed: 1800 cycle/min
Overall height: 190 cmWeight: 370 kg
Mould weight: 7.4 kg
EL42-5305/01 Los angeles abration machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 43/83
Asphalt testing ASPHALT TESTING
page 44 http://www.testmould.com
DETERMINATION OF CONSISTENCY
STANDARD: EN 12274-3
Sand absorption cone and tamperCone and tamper manufactured according to thespecifications and is also used in determining the specificgravity and absorption of fine aggregates.
48-D0440 Sand absorption cone and tamperSA-C Cone weight: 250 gSA-T Tamper weight: 200g
Test the plasticity of lubricating grease and the hardness ofbitumen.Main structure:1. A set of lights, control circuit inside the base, time displayand penetration display windows and function keys on thepanel.2. Needle rod releaser3. A movement knob on the left of releaser.4. Shift sensor
Model: CT-A
Time Setting: 5-30s
Max needle penetration: 500Displace measure range: 0-30mmMeasuring accuracy: ±1%(0 - 10mm); ±10%(10.1 -
30mm)
Standard needle: 2.5±0.05gSample vessel: dia. 70mmPower supply: 220VAC 50HzPower: 25W Max
PENETROMETER
AUTOMATIC PENETROMETER
CT-A AUTOMATIC PENETROMETER
48-D0440
P.R.D. SPLIT MOULD AND BASEPLATE
Used to determine the degree of compaction of asphalt for
road pavement quality control testing. The unit consists ofa mould split vertically on one side together with a clamp-attached baseplate. Plated for protection against corrosion.
76-B0088 PRD Split Mould and Baseplate
76-B0088 PRD Split Mould and BaseplateInt. dia: 152mm Height: 160mmWeight: 10.9 Kg
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 44/83
Asphalt testing ASPHALT TESTING
http://www.testmould.com page
45
STANDARD: EN 12697-27
PAVEMENT CORE DRILLING MACHINE(CONTINUED)
TPD-Q20 Core drilling machine
TPD3-250 Core drilling machine
TPD-Z110 Core drilling machine
Max Dia of drilling: 200 mm
Max depth of drilling: 400 mm-700 mm
Rotate speed: 800-1200 r/min
Power: 3.3 Kw
Weight: 130 Kg
Dimentions: 1080×780×1150 mm
Max Dia of drilling: 200 mm
Rotate speed: 700/1200 r/min
Power: 2.2 Kw 380 V
Weight: 50 Kg
Max Dia of drilling: 110 mm
Rotate speed: 0-1900 r/min
Power: 1.4 Kw 220 V
Weight: 6 Kg
TPD-Q20 Core drilling machine
Auxiliary power : 6.5 hp
Depth of conventional drilling: 350 mm
Rotate speed: 600-700 r/min
Drilling vertical downward direction.
Mode of operation:manual feed, relying on self-
respect down the sampling
Drilling diameter: 150 mm below
Coring Time:4-5 minutes to get 230 mm
cement concreteMax capacity of Water tank: 140 liters
Weight: 350 Kg
Dimentions: 1430 × 1150 × 1200mm
TPD-100 Core drilling machine
TPD-100 Core drilling machine
TPD-Z110 Core drilling machine TPD3-250 Core drilling machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 45/83
Asphalt testing ASPHALT TESTING
page 46 http://www.testmould.com
SKID RESISTANCE AND FRICTION TESTER
Skid resistance and friction tester
STANDARD:
EN 13036-4(ALSO CONFORMING TO EN 1097-8, ASTM
E103)
This method provides a measure of the skid resistanceproperties of a surface either in the field or in the laboratory.This method measures the skid resistance of a small areaof a surface (approximately 0.01 m2 ) and this should beconsidered when deciding its applicability to a pavementsurface which may have variable surface characteristics, e.g.block paving.
DUCTILITY TESTING MACHINE
STANDARD: ASTMD113
TD-508 A/B Ductility testing machine
Test the length of asphaltum when asphaltum is drawn tobreak under certain temperature and speed.
Accessories
It is made of brass, accurately machined to the
specified dimensions.
Ductility mould and ductility mould plate
TD-508 A/B Ductility testing machine
Specification
Rocker weight: 1500±30 gDistance between rocking centre andcenter of gravity:
410±5 mm
Positive static pressure on pavement: 22.2±0.5 kN6 rubber slider and base plateOverall weight approx: 12 Kg
TD-508 A/B Ductility testing machine
Testing Range: Model A: 1.5mModel B: 2m
Temperature controlrange:
Ambient~50, adjustable
Temperature control
accuracy:
±0.5
Test accuracy: ±1 mmStretch speed: 50±2.5 mm/minTemperature and ductility are controlled bymicroprocessor, access data and calculate results.Power supply: AC 220V ±10 % 50 Hz
48-B0190 Skid resistance and friction tester
48-B0190 Skid resistance and friction tester
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 46/83
Asphalt testing ASPHALT TESTING
http://www.testmould.com page
47
DUCTILITY TESTING MACHINE(CONTINUED)
TD-508G Low Temperature ductility testing machine
Ductility testing machine
The instrument is used to test the length of the asphaltunder regulated conditions and temperature when it is just broken by pulling at a certain speed, viz. ductility. Asper ASTM D133, and unit is “cm” Driven by double poles,that ensures pulling stably and synchronically. Systemof the ductility test is controlled by SCM, digital display.Microprocessor records automatically and calculates theaverage.
It integrates achievements of domestic and overseas designconcepts on ductility tester. It is advanced and delicate.There is no thread rod, guide rail and other device in thetest trough, so it is convenient to install test sample.Equipped with newly designed driving parts, it is stable andsynchronous without shake during dragging procedure. Thedragging speed is uniform and the ductility is accurate.It can make determination for ductility of 3 pieces ofsamples and dragging force of 2 pieces of samples at thesame time. It adopts computer control techniques, so it iswith high temperature controlling accuracy.
Specifications
TD-508C, TD-508D Ductility testing machine
Power supply: AC 220 V (-5%~+10%), 50 Hz
Measurement range: TD-508C:1.5 m (±10mm),TD-508D:2.0 m (±10mm)
Heating type: by an electric heaterHeating power: TD-508C: 3000 W,
TD-508D: 3200 WBath circulation: by a magnetic circulation pumpTemperature controllin range: 5~49; digitally displayedTemperature controlling
accuracy:
±0.5
Dragging speed: two grades, 10 mm/min and 50mm/min
Measurement accuracy: ±1 mmDuctility display: Controlled by microprocessor,
digitally displayed after dataprocessing
Refrigeration type: by a compressor,TD-508C: input power is 950 WTD-508D: input power is 1200 W
Ambient temperature: -10~+35Relative humidity: ≤85%Total power consumption: TD-508C: not more than 4100 W,
TD-508D: not more than 4500 W
TD-508G Ductility testing machine
Power supply: AC 220 V (-5%~+10%), 50 Hz
Measurement range: 2.0 m (±10mm)
Heating type: by an electric heaterHeating power: 3200 WBath circulation: by a magnetic circulation pumpTemperature controlling range: 5~50; digitally displayedTemperature controllingaccuracy:
±0.1
Dragging speed: two grades, 10~50 mm/min,frequency conversion steplessadjustable
Measurement accuracy: ±1 mmDuctility display: Controlled by microprocessor,
digitally displayed after dataprocessing
Dragging force measurementrange:
0~300 N
Dragging force accuracy: ±1N;Display resolution: 0.1 NData output: 1) Communicate with a computer
through a RS232 port2) Printed out by a micro-printer
Refrigeration type: by a compressor; input power is800 W
Ambient temperature: -10~+35Relative humidity: ≤85%Total power consumption: not more than 4000 W
TD-508C, TD-508D Ductility testing machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 47/83
Asphalt testing ASPHALT TESTING
page 48 http://www.testmould.com
MARSHALL STABILITY TESTER
STANDARD:
ASTM D1559, AASHTO T245, NF P98-251-2,
CNR NO. 30, ASTM D5581 (6” DIA. SPECIMENS)
AUTOMATIC RING AND BALL APPARATUS
STANDARD:
EN 1427, ASTM D36
Introduction
This advanced microprocessor controlled automatic testeris used to determine the softening point of bitumen using,as heating fluid, water or glycerol. The softening point istaken by two light barriers suitably positioned and thetemperature measured by a PT100 sensor placed in amiddle position. During operation a magnetic stirrer withadjustable speed assures temperature uniformity in thevessel.The temperature gradient is strictly maintained throughoutthe test by the electronic system conforming to the
standards.
TD-806E TD-806GTD-806H
It is used to test the temperature of asphaltum whenasphaltum softens and drops 25mm under the heatingconditions.Computer-controlled temperature rising speed, datachecking, data saving and data processing.
76-B0038/CB Mashall stability tester
Test speed: without load: 50±2mm/min with load: 50±5mm/min
Max.load: 50kN
Accuracy: ±1%Specimen size: dia. 152.4×95.3 mm
dia. 101.6×63.5 mmPower: 380V 50Hz 550WNet weight: 205kgDimensions: 770x530x950mm
TD-806E Automatic ring and ball apparatus
Diameter of Steel Ball: 9.53mm
Weight of steel Ball: 3.5±0.05g
Heating container: 1000mlCalefactive speed: 5±0.5 /minTemperature measure Range: 5~90Paking size: 380x290x360mmGross weight: 6KgNet weight: 3Kg
76-B0038/CB
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 48/83
Asphalt testing ASPHALT TESTING
http://www.testmould.com page
49
Type 82 Asphalt oven
AUTOMATIC RING AND BALL APPARATUS (CONTINUED)
This instrument is suitable to the standards of GB/T5304,T0610-1993. Test the loss of quality of asphaltum rotatingpellicle oven after heating and value the aging capability ofasphaltum.Stainless steel lumen; Computer controlled temperaturetesting; Digital displays, Flowmeter tests wind volume.
STANDARD: ASTMD2872
ASPHALT OVEN
TD-806H Automatic ring and ball apparatus
Determinate samplequantity every time:
4 ps
Power supply: 220V(+10%, -5%) 50Hz AC
Working surroundings: room temperature is less35
Determinate range: S amp le s o f ten ing po inti s be low 80, dist i l ledwater as heating medium,+5.0~+80
Sample softening point is more than 80, glycerol asheating medium, +32~+160 Temperature distinguish: 0.01
Stirrer: Stirring speed adjustablecontinuously
Heating speed: Adjusted to 5.0±0.5 / minafter 3 min
Softening point solution: LCD display, printer printHeating power: 600 WPacking size: 480x360x600 mmGross weight: 18 KgNet weight: 12 KgWith RS-232C communication port
Specifications
TYPE 85 Asphalt oven
Rotating Speed of Sample Shelf: 15±0.2 r/min
Whiff Flux: 4±0.2 l/minSample in one time: 8Working Temperature: 163±0.5Power: 3.5 kWTiming range and accuracy: 85 min±1 min
TYPE 82 Asphalt oven
Power: 220V
Control accuracy: 163 ± 1
Rotating Speed of Sample Shelf: 5.5 r/ minFor each test: 5.25 hStudio Size: 430 × 410 × 450 mmSample in one time: 4
TD-806G Automatic ring and ball apparatus
Measure range: 5~80 32~160Calefactive speed: 5±0.5 /minDiameter of steel Ball: 9.53 mmWeight of steel Ball: 3.5±0.05 gVolume of heating container: 1000 mlPacking size: 480x360x600 mmGross weight: 19 KgNet weight: 14 KgComputer-controlled temperature rising speed,automatically data checking, data saving and dataprocessing or RS232.
Type 85 Asphalt oven
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 49/83
Cement testingCEMENT TESTING
page 50 http://www.testmould.com
SOUNDNESS OF CEMENT
Strictly conforming to EN standard. Individually checked,supplied complete with certificate of conformity.EL38-3005 weight approx: 30 g
STANDARD VICAT APPARATUS
Vicat test set. EN method
Used for determination of setting time and consistency ofcement by Vicat Method. The apparatus consists of a metalframe with a sliding rod. An adjustable indicator moves overa graduated scale. The needle or plunger is attached to thebottom end of the rod to make up the test weight of 300g.The frame is supplied without accessories, which have tobe ordered separately depending on the requirement.
63-L0028 Vicat test set Weight approx.: 4 kg
Comprising Vicat frame
Vicat mould Consistency plunger 10 mm dia.
Supporting glass plate
Initial needle 1.13 mm dia.Final needle 1.13 mm dia.
JOLTING TABLE
Jolting table
This machine consists of a mould table seated on arotating cam driven at 60 revolutions per minute. The
apparatus is supplied with mains switch box, push buttonstart/stop control, and automatic stop control at end oftest.
EL39-1150/01 Jolting table
Vibration part of the total weight: 20 ± 0.5 kg Amplitude: 15mm ± 0.3 mm
Vibration frequency: 60 times/60 seconds±1second
Power supply voltage: 220 V 50 Hz
Le Chatelier mould
EL38-3005 LE CHATELIER MOULD
EL39-1150/01 Jolting table
63-L0028 Vicat test set
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 50/83
Cement testingCEMENT TESTING
http://www.testmould.com page
51
STANDARD:
BS 3892-1, 4551-1, EN 196-1, 413-2, 459-2,
1744-1,1015-10,11, ISO 679 EN 13454-2.
Three gang mould for prisms 40 x 40 x 160 mm madefrom steel. The mould is used for casting specimens ofcement aggregate combinations for measuring the potentialexpansive alkalireactivity.The effective gauge length is made of mild steel and hasaccurately machined faces. The parts of the moulds aretight fitting and firmly held together when assembled.Supplied complete with base plate and four stainless steelor brass smooth reference pins.
SM-C41B
PRISM MOULDS
Three gang mould
SM-C41C
Model No Dimension(mm) Weight(kg)
SM-C41A 40 x 40 x 160 9.2
SM-C41B 40 x 40 x 160 12
SM-C41C 40 x 40 x 160 10
PREPARATION OF MORTAR CUBES
Three gang cube mould
STANDARD:
ASTM C87, AASHTO T71
Machined out of High lead naval brass, this three gang2" x 2" cube mold makes 3 compression test cubes atonce. This mold casts cubes in a diagonal arrangement witha detachable brass base plate.Wing nut clamps lock the mold to the base while stainlessthumbscrews secure halves tightly together. Large screedoff upper surface area makes this mold a preferredchoice. Optional accessories include an all brass fittedtop, or a cover plate designed to pour molten sulfurcapping compound down through taper holes for testingcompressive strength.
PM-BS50 brass three gang cube mould
EL39-0410 cast iron three gang cube mould
Model No Dimension(mm) Weight(kg)
PM-BS50 2" x 2" cube mould 8.4
EL39-0410 50×50 cube mould 6.5
SM-C41A
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 51/83
Cement testingCEMENT TESTING
page 52 http://www.testmould.com
CONE PENETROMETER METHOD
Cone Penetrometer
STANDARD: BS 1377, 1924-2, EN DD ENV 1997-2
The method is fundamentally more satisfactory thanthe Casagrande method as it is essentially a static testdepending on the soil shear strength. The test is basedon the relationship between moisture content and thepenetration of a cone into the soil sample under controlledconditions.
Specification
Dial indicator: 150 mm diameter, indicator pointincorporates friction/gear system
Heightadjustment:
Rapid,using integral clamping mechanism
Cone release: ManualCone: 1 x 30o, 150 mm test cone includedBase: casti iron, adjustable leveling feetWeight(approx): 20 kg
Penetration Test Cone Penetration Test Cup
Accessories
Test Gauge. For checking the condition of the
Cone Point. Weight 30 gPenetration Test Cup. 155 mm diameter by 150
mm deep, with the rim parallel tothe flat base.Weight 1600 g
Penetration Test Cone. Brass, 150 mm long with
smooth surface at an angle of 30o.Weight 100 g
COMPRESSION JIG
Specification
Distance between platens: 40 ± 0.1mmOverall Dimension: 100 dia. x 165mm
Weight approx.: 5kg
EL24-0540 Cone Penetrometer
EL24-0540 Cone Penetrometer
CJ-01 Compression jig
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 52/83
Cement testingCEMENT TESTING
http://www.testmould.com page
53
BULK DENSITY OF CEMENT
STANDARD: ASTM C91, C110
62-L0060 Apparatus is used to determine the bulk densityof cement as specified by the “Commission des méthodesd’essai des matériaux de construction”. It consists of asieve funnel, an unit weight measure 1 litre capacity, atripod, and straightedge.
Overall dimensions: 350x350x520 mmWeight approx.: 3 kg
AIR CONTENT METER
This modern meter utilizes the principle of Boyle's Law andconsists of a flanged cylindrical vessel and cover assembly
incorporating a pressure gauge air pump and valves. Thebase can also be used for unit weight measurement offresh concrete and aggregates. Supplied complete withcalibration set.
STANDARD:
EN 1350-7,BS 1881-106,ASTM C231
ACM-01 Air content meter ACM-02 Air content meter
62-L0060
Apparatus for the measurement of bulk density
of cement
Code ACM-01 ACM-02
Capacity (L): 7 1
Air content range 0-10% 0-50%
Accuacy
± 0.1%(0%-6% of aircontent);± 0.2%(6%-10% of aircontent)
± 0.1%
Dimension(mm) ~ 200 x 320
Weight(Kg) 10 4
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 53/83
Rock and aggregates testingROCK AND AGGREGATES TESTING
page 54 http://www.testmould.com
SAND EQUIVALENT SHAKER SPECIMEN GRINDING MACHINE
Used to grind and polish concrete specimens, naturalstones, ceramic materials, rock samples etc.The cubecylinder and core specemens can be easily locked on thetable and the grinding head 330 mm dia. can be radiallymoved either manually or automatically in both directionsso the only manual operation requested is the lowering ofthe grinding head by the top hand wheel. The machine issupplied complete with chip guard, coolant tank, motorpump, one set of abrasive sectors and instruction manual.Diamond grinding sectors are available on request.
NR-01 Specimen grinding machine is suppliedcomplete with clamping element for 100, 150 and 200 mmcubes. Clamping devices for cylinders are also available onrequest.
STANDARD: ASTM D4543
Motorised sand equivalent shaker Specimen grinding machine
NR-01 Specimen grinding machine
Spare parts
The motorized sand equivalent shaker features twoseparate electronic timers (one preset at 45 seconds andthe other preset at 10 minutes) to increase accuracy andease of operation compared to a spring-type timer. It isrecommended for samples in the laboratory.
Code Description
47-T0050/1 Measuring cylinder(ASTM)
47-T0050/1A Messuring cylinder(EN)47-T0050/2 Rubber stopper47-T0050/3 Measuring can47-T0050/4 Irrigator tube47-T0050/5 Siphon assembly with bottle47-T0050/6 Weight foot(ASTM)47-T0050/61 Weight foot(EN)86-D1546 Funnel82-D1694 Graduate rule, 500 mm47-T0050/10 Plastic case
STANDARD:EN 933-8
ALSO CONFORMING TO NF P18-598,
UNI 8520-15, UNE 83131, CNR NO. 27
Model: 47-T0056/B
Stroke: adjustable 203±1 mm
Rate: 180±2 strokes/minPower Supply: 220 VRated power: 90 WWeight: 45±1KgDimension: 564×320×360mm
Specification
Speed: 1400 r/min
Wheel Size: 250 × 30 × 32 mmMotor: AQ28024, 750 W, 380 V, 50 Hz
Dimension: 730 ×420 ×360 mmWeight: 70 kg
47-T0056/B Motorised sand equivalent shaker
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 54/83
Rock and aggregates testingROCK AND AGGREGATES TESTING
http://www.testmould.com page
55
STRAIN GAUGE
Introduction
The strain gauge is disport from two kinds. One is SZseries. Other is BX series. There are two different and usingthe different materials. One is paper basement, representedby Z letter. Another is aldehyde basement. According tointernational standars, name them as below:For example:S Z 120 – 5 AA B X 120 – 10 BA 1 2 3 4 5 1 2 3 4 5
1 represent sense organ material(S: wire wound; B: foil strain gauge)2 represent basement material(Z: paper based;X: acetal based; A: paper chromatography;
Q: impregnated based)3 represent resistance value, unit is Ohm.4 represent length of the strain guage, unit is mm5 represent configuration.(AA: uniaxial strain gauge; BA:biaxial 90o; BB: biaxial 90o ;BC: biaxial 90o overlaping; CA: triaxial 45o; CB:triaxial 45o
overlaping; CC: triaxial 60o;CD: triaxial 120o; DB: four-axle 45o /90o )
Specifications
Code no. Item Size(mm)BX-1 BX120-1AA 1x1BX-2 BX120-2AA 2x1BX-3 BX120-3AA 3x2BX-4 BX120-5AA 5x3BX-5 BX120-10AA 10x3BX-6 BX120-15AA 15x3
BX-7 BX120-20AA 20x3BX-8 BX120-30AA 30x3BX-9 BX120-40AA 40x3BX-10 BX120-50AA 50x3BX-11 BX120-60AA 60x5BX-12 BX120-80AA 80x5
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 55/83
Rock and aggregates testingROCK AND AGGREGATES TESTING
page 56 http://www.testmould.com
ST-1 Open wire saw
SAMPLING TOOLS
DETERMINATION OF THE PARTICLE
ST-2 Wire saw
ST-3 Rimming knife
UNIT WEIGHT MEASURES
STANDARD: BS, ASTMConstructed in heavy gauge steel with two handles.
ACCELERATED POLISHING MACHINE
STANDARD: EN 1097-8, EN 1341, 1342, 1343
(PAVING STONES AND PAVING BLOCKS)
STANDARD: EN 1097-7, Also conforming TO BS 812,
NF P18-558
Used to measure the resistance of road stone to thepolishing action of vehicle tires on a road surface. Thismachine provides a method of preparing polished stonespecimens for use with the friction tester when used in alaboratory environment.
48-D0525 Accelerated polishing machine
Dimensions(L x W x H): 550x630x1600 mm(bottle fitted)Rated power: 400 WRoad wheel: 15 to 325 rpm Applied load onspecimens:
715 to 735 N
Feed rates Corn: emery 20 to 34 g/minWater: 20 to 34 ml/minFlour emery: 2 to 4 g/minWater: 5 to 8 ml/min
Code no. Capacity(L)
48-D0445/1 1
48-D0445/2 5
48-D0445/3 1048-D0445/4 15
48-D0445/5 20
48-D0445/6 30
Code no. Capacity(ml)
NR-07-5 5
NR-07-10 10
86-D1125 25
86-D1126 50
86-D1127 100
NR-07-250 250
NR-07-500 500
NR-07-1000 1000
NR-07-2000 2000
48-D0525 Accelerated polishing machine
Specific gravity bottles (Gay-Lussac type)Used to determine the specific gravity of fine soils. Glassbottle complete with capillary vent stopper.
86-D1125, D1126, D1127
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 56/83
Rock and aggregates testingROCK AND AGGREGATES TESTING
http://www.testmould.com page
57
AGGREGATE CRUSHING VALUE
STANDARD: BS 812-110, 111
The aggregate crushing value provides a relative measureof the resistance of an aggregate to crushing under agradually applied compressive load. Supplied complete withcylinder, plunger, base plate, tamping rod, and measure.
AC-150 Aggregate Crushing Value Apparatuscomprising
150 mm nominal diameter steel cylinder, plunger
and base plate. Weight: 16.6 kg
Metal Measure 115 mm diameter x 180 mm deep.Weight: 870 g
Tamping Rod 16 mm diameter x 600 mm long withrounded end.
AC-75 Aggregate Crushing Value Apparatuscomprising
75 mm nominal diameter steel cylinder, plunger
and base plate. Weight: 3.5 kg
Metal Measure 57 mm diameter x 90 mm deep.Tamping Rod 8 mm diameter x 300 mm long withrounded end. Weight: 350 g
AC-150, AC-75
DETERMINATION OF FLAKINESS AND ELONGATION
STANDARD: BS 812
EL42-0410 Flakiness Gauge constructed of heavygauge sheet steel to the dimensions specified in BS 812.
Weight: 60 g.
Flakiness Gauge
EL42-0410 Flakiness Gauge
EL42-0820 Length Gauge classifies aggregateelongation by measuring the length of individual particles. Aggregate particles are considered elongated when theirlength is more than 1.8 of their nominal size.
Weight: 480g
Length gauge
EL42-0820 Length Gauge
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 57/83
Drying SamplesDRYING,WEIGHING AND GRADING
page 58 http://www.testmould.com
General description
ELECTRIS THERMOSTATIC OVEN
Drying, heating, hot preservation, ageing ofcomponents, thermal tests in laboratories andindustries.200°C maximum or 300°C maximum (depending onthe option).Volumes: 27, 64, 125, 250, 343, 490, 686, 980 litres.
Internal fan for air circulation
All ovens are fan circulated models. The air flow speedsup the drying process and also evens the temperaturedistribution within the oven.The fan and heaters are in the rear of the oven, shieldedfrom the workspace by a stainless steel baffle.
Air is drawn into the fan from the centre of the oven andpasses over the temperature sensor and the sheathedheater elements. The heated air is distributed around thebaffle to both left and right and then re-circulated by thefan.
Oven's panel
oven's internal detail
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 58/83
Drying SamplesDRYING,WEIGHING AND GRADING
http://www.testmould.com page
59
Technical data
Ovens TU027 TU064 TU125 TU250 TU343 TU490 TU686 TU980
PerformanceTemperature range ambient + 10°C to 200°C or 300°C as an optionTemp spatial variation105°C±°C
< 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2
Temperature fluctuation ±°C
< 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
DimensionsWork chamber volume L 27 75 125 250 343 490 686 980
Internal width mm 300 400 500 500 700 700 700 1000
Internal depth mm 300 400 500 500 700 700 700 700Internal height mm 300 400 500 1000 700 1000 1400 1400External width mm 440 540 640 640 840 840 840 1140External depth mm 500 610 710 710 910 910 910 1015External height mm 570 670 770 1270 970 1270 1670 1670Shelves in stainless steelNumber standard / max 1/4 1/4 2/8 2/17 2/17 2/17 2/24 2/24Shelves dimensions(w x d) mm
270x270 470x470 470x470 470x470 670x670 670x670 670x670 970x670
Max load shelf / oven kg 30/60 30/60 30/60 30/120 30/120 30/240 30/240 30/240Number of door (s) 1 1 1 1 1 1 1 2Mass (empty) Kg 28 48 66 115 145 180 235 295
Electrical supply 50 Hz 230 Volts (1) above 4000 watts: 400 V tri + T + NMaximum power rating200° Watts
1000 1000 1000 1500 3000 4000 6000 (1) 9000 (1)
Max rating 300°C (option)Watts
1000 2000 2000 4000 5000 6000 (1) 9000 (1) 12000(1)
Factory options (must be specified at the time of ordering the main unit)OG9001 Extension of max temperature up to 300°C OP0014 Work chamber lighting 40 watts
OG9002 Outside casing also made of 304 stainless steel OG9006 Door windowOG9003 Inner case in 316L stainless steel OG9005 Air circulation variatorOG9004 Special colour for external casing (indicate RAL) OP0057 Additional thermocouple and connectorOP0038 Digital timer 0/99 hours with auto/manu selection OG9007 Additional safety thermostat class 2OG9008 Weekly automation with digital program timer OP0001 Sound alarmOP0049 Temperature profiler (4 programs of 16 segments each OP0041
OP0042
Additional access port diameter 40 mm & silicone cork Additional access port diameter 60 mm & silicone cork
OP0026OP0024
Air extractor 60 m3 /hour Air extractor 230 m3 /hour
OP0079OP0080
Air extractor 60 m3 /hour with variator Air extractor 230 m3 /hour with variator
OG9014OG9015
Temperature paper recorder 1 probeTemperature paper recorder 2 probes
OP0010OP0012
Calibration certificate 1 temperature 1 pointCalibration certificate 1 temperature 9 points
Accessories (can be ordered separately)
GA9001 Extra shelf 30 kg and supports GA9004 Stacking kitGA9002 Reinforced extra shelf 60 kg and supports GA9005GA9006
Sub-frameSub-frame with castors
GA9003 Stainless steel tray (20 mm depth) AC0011 AC0012
Silicone cork for access port diameter 40 mmSilicone cork for access port diameter 60 mm
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 59/83
Drying SamplesDRYING,WEIGHING AND GRADING
page 60 http://www.testmould.com
HIGH TEMP OVENS
The high temperature ovens are easy to use and getfunctional and practical equipments together, at veryreasonable prices compared with furnaces.They are suitable for a large number of applications :burning, degassing, pre-heating, hardening, hot airsterilization, tests ... in many branches of industry. All high temperature ovens are strongly ventilated forthe accuracy and homogeneity of temperature in thevolume.
Low thermal mass insulation materials and strong powerrating have been used to achieve rapid heating.
Performances
Temperature up to 500°C.Temperature fluctuation is less than ± 0,2 °C .Temperature spatial variation is less than ± 2,5°C at 200°C(measure done with 9 probes inside the work chamber).
Construction
5 sizes of ovens are available from 75 to 686 liters.The inner casing is made of corrosion and heating resistantstainless steel, type 321. The outer case is made of sheetsteel, finished in a tough stoved epoxy paint. (colour lightgrey RAL 7035) No contact between inner and outer caseand an optimised insulation minimise heat transfer tothe ambient air and heat dissipation. Walls and door areinsulated with glass fibre. The insulation is 150 mm thick,this ensures efficicent operation, low external temperaturesand excellent thermal stability. A special gasket providesa good seal between the door and the oven body, aidinginsulation. The insulation as well as the gasket are asbestos-free. The door is hinged on the right hand side and closedwith a robust 2 points fastener.
Internal fan for air circulation
All ovens are fan circulated. The air flow speeds up theheating time and also evens the temperature distributionwithin the oven. The centrifugal blower is located at the topof the oven, shielded from the workspace by a stainlesssteel baffle. Air is drawn into the fan from the top in thecentre of the oven and passes over the temperaturesensor and the sheathed heater elements. The heated airis distributed in the bottom of the oven through the wholewidth and then re-circulated by the fan.
Exhaust air, fresh air supply
Through access vent, fresh air is provided and pre-heatedbefore entering the chamber. A 40 or 60 mm diameterexhaust vent (depending on the model) is provided with anadjustable valve to control the exhaust air flow.
Temperature control and safety
Temperature sensor is a J thermocouple. Temperature iscontrolled by a precise microprocessor-based controller that
provides a high accuracy and prevents the set temperaturefrom being exceeded. The controller digitally displayscontinuously the set and actual values oftemperature. Anindependent second electronic controller, with a secondthermocouple, has an adjustable upper limit, giving a class2 protection.
Heating
The tubular heating elements are sheathed and made ofstainless steel. They are ideally placed in the air blow. No-wear switching (solid state relay) is used for activating and
deactivating the heating elements.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 60/83
Drying SamplesDRYING,WEIGHING AND GRADING
http://www.testmould.com page
61
Technical data
Ovens TH075 TH125 TH343 TH490 TH686
Performance
Temperature range ambient + 20°C to 500°CTemp spatial variation 200°C (1)±°C
< 2,5 < 2,5 < 2,5 < 2,5 < 2,5
Temperature fluctuation ±°C < 0,2 < 0,2 < 0,2 < 0,2 < 0,2
Dimensions
Work chamber volume L 75 125 343 490 686Internal width mm 500 500 700 700 700
Internal depth mm 500 500 1000 1000 1000Internal height mm 300 500 700 1000 1400External width mm 750 750 935 935 935External depth mm 750 750 1125 1125 1125External height mm 800 1000 1250 1550 1950Shelves in stainless steelNumber standard / maximum 1/2 2/3 2/4 2/6 2/8Shelves dimensions(w x d) mm
470x470 470x470 670x670 670x670 670x670
Max load shelf / oven kg 30/60 30/60 30/120 30/150 30/180Number of door (s) 1 1 1 1 1Mass (empty) Kg 95 115 210 270 350
Electrical supplyVoltage 50 HZ Volts 1000 1000 1000 1500 3000
Max power rationg Watts 3000 4000 9000 12 000 15 000
Factory options (must be specified at the time of ordering the main unit)OG9002 Outside casing also made of 304 stainless steel OP0014 Work chamber lighting 40 wattsOG9004 Special colour for external casing (indicate RAL) OG9006 Door windowOP0038 Digital timer 0/99 hours with auto/manu selection OG9005 Air circulation variatorOG9008 Digital weekly program timer OP0118 Additional thermocouple and connectorOP0049 Temperature profiler (4 programs of 16 segments each OG9009 Additional safety thermostat class 3.1
OP0116OP0117
Additional access port diameter 40 mm& silicone cork Additional access port diameter 60 mm
& silicone corkOP0024OP0025
Air extractor 230 m3/hour Air extractor 485 m3/hour
OP0080OP0091
Air extractor 230 m3/hour with variator Air extractor 485 m3/hour with variator
OP0016OP0017
Temperature paper recorder 1 probeTemperature paper recorder 2 probes
OP0010 Calibration certificate 1 temperature 1 point
Accessories (can be ordered separately)GA9001 Extra shelf 30 kg and supports AC0032
AC0033Silicone cork for access port diameter 40 mmSilicone cork for access port diameter 60 mm
GA9002 Reinforced extra shelf 60 kg and supports GA9005GA9006
Sub-frameSub-frame with castors
HIGH TEMP OVENS(CONTINUED)
Equipment
Fixed shelving for convenient loading / unloading. 1 shelf is supplied for TH075 and 2 for the other models. Additionalshelves are available. A 20 mm diameter access port with fiber cork is fitted as standard in the left hand wall of the oven.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 61/83
Drying SamplesDRYING,WEIGHING AND GRADING
page 62 http://www.testmould.com
Used for high temperature heating and drying.
MUFFLE FURNACES
Main features:1. Resistance wire embedded inside lining, up,down, left, right, bottom, 5 surface heating, furnacetemperature uniformity.2. Having a vent to discharge the steam and other
gases, prolong service life of heating elements.3. Having a hole to observe the heating condition.4. Chamber adopts advanced light material (0.29density), compared with the traditional muffle furnaceweight the 2/3, the rate of temperature have doubled,save the energy, the life expectancy increased 4 times.5. Controling temperature by programmable temperaturecontrol meter, intelligent temperature control, easy tooperate.
Specification
Max. temperature: 1200
Workign temperature: 1100
Inside dimensions: 200x200x200mmVoltage: 220V, 50HZPower: 4kWTemperaturetolerance:
± 0.5
Temperature controlmode:
Programmable automaticcontrol
MF-1200 Muffle furnaces
SAND BATH
Model
Specification Voltage(V)
Power(kW)
Workroomdimension mm
SB-01 300x250 220 1.5 300x250x70
SB-02 450x350 220 2 450x350x70
Model Max.temp.( )
Voltage Power(kW)
Workroom(mm)
WF-1000/1 1000 220V/50HZ 2.5 200x120x80
WF-1000/2 1000 220V/50HZ 4 300x200x120
MF-1000 Muffle furnaces
MF-1200 Muffle furnaces
MF-1000 Muffle furnaces
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 62/83
Drying SamplesDRYING,WEIGHING AND GRADING
http://www.testmould.com page
63
General description
Used for drying,concentration,distill,dripping chemicalreagent,medicine and biological product, also used forwater bath constant temperature heating and anothertemperature test.
WATER BATH
Main featureStainless steel inner tank, built in heating pipe, Pt100transducer.Temperature constancy, convenient to set. Equippedwith oil bath.
Specification
Capacity(cm): 26 dia x 15 high
Rating(kw): 1.5Temp range: room temperature to 100
Lift distance(mm): 120 manually operation
WB-01/A Water bath
TPW seriesThermostatic water bath
Uses:It applies in distilling, drying, concentrating and thermostatic
heating the chemical drugs, checking serum andthermostatic culture the biological products and boilingsterilizing in laboratories, medical and health units, scientificand research units and colleges and universities etc.Characteristics:The shell adopts electrostatic spraying technology. Theinner bladder and upper cover are made of high-qualitystainless steel plate with property of corrosion resistant.There are hand-pointer type, digital display type andintellectual type for controlling temperature.
Specification
Type TPW420 TPW60
Voltage(v) 220 220
Power(w) 500±10% 750±10%
Temperature uniformity( )
≤±1 ≤±1
Temperature tolerance( )
≤±1 ≤±1
Temperature range( ) 37-65 37-65
Workroom(mm) 420x180x105 600x300x150
Inside detail of TPW seriesThermostatic water bath
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 63/83
Drying SamplesDRYING,WEIGHING AND GRADING
page 64 http://www.testmould.com
WATER BATH(CONTINUED)
TPKW series Water bath
Characteristics:The surface is made of coated steel. The inner bladderand the upper cover is made of stainless steel, it resistscorrosion strongly. There are hand pointer and digitaldisplay meters. It has advantages of high precision incontrolling.
Specification
Model TPKW-D-1 TPKW-D-2 TPKW-D-4 TPKW-D-6 TPKW-S-4 TPKW-S-6 TPKW-S-8
Specifications single single single line4 holes
single line6 holes
double line4 holes
double line6 holes
double line8 holes
Voltage(v) 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz
Power(w) 300 500 1000 1500 1000 1500 2000
Temperatureuniformity( )
≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1
Temperaturetolerance()
≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1
Temperature range( )
RT+10-100 RT+10-101 RT+10-102 RT+10-103 RT+10-104 RT+10-105 RT+10-106
Temperaturesensitivity( )
≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1
Tolerance ofdisplay( )
≤±2 ≤±2 ≤±2 ≤±2 ≤±2 ≤±2 ≤±2
Workroom(mm)
160x170x90 325x170x90 650x170x90 940x170x90 325x330x90 480x330x90 650x330x90
TPHW Tri-purpose water bath
Characteristics:The shell adopts electrostatic spraying technology. Theinner bladder and upper cover are made of high-qualitystainless steel plate with property of corrosion resistant.There are hand-pointer type, digital display type andintellectual type for controlling temperature.
TPKW series Water bath
Model Voltage(v) Power(w) Temperatureuniformity( )
Temperaturetolerance
Temperaturerange( )
Workroom(mm)
TPHW420 220 1000±10% ≤±1 ≤±1 37-100 420x180x105TPHW600 220 2000±10% ≤±1 ≤±1 37-100 600x300x150
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 64/83
Weighing SamplesDRYING,WEIGHING AND GRADING
http://www.testmould.com page
65
ELECTRONIC BALANCE
EB series
General description
Model EB-100 EB-200 EB-500 EB-1000
Max. Capacity 100g 200g 500g 1000gResolving power 0.1g 0.1g 0.1g 0.1gCalibration Weights 100g 200g 500g 1000gScale pan dimension dia. 135mmDisplay LEDVoltage AC220V±10% 50±1Hz
Usage EnvironmentTemperature
0~40
EB-B series
Model EB-100B EB-200B EB-300B EB-500B EB-600B EB-800B EB-1000B
Max. Capacity 100g 200g 300g 500g 500g 800g 1000gResolving power 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.02gCalibration Weights 100g 200g 200g 500g 500g 500g 1000gScale pan dimension dia. 135mm
Display LED
Voltage AC220V±10% 50±1Hz
Usage EnvironmentTemperature
0~40
EB-02A series
Model EB-102A
EB-202A
EB-302A
EB-502A
EB-602A
EB-802A EB-1002A
EB-1202A
EB-1502A
EB-2002A
EB-2000A
Max. Capacity 100g 200g 300g 500g 600g 800g 1000g 1200g 1500g 2000g 2000gResolving power 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.02g
CalibrationWeights
100g 200g 200g 500g 500g 500g 1000g 1000g 1000g 2000g 2000g
Scale pandimension
dia. 115mm dia. 135mm
Display LCDVoltage AD 8V 300mA / 8 part AA battery
Usage
EnvironmentTemperature
0~40
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 65/83
Weighing SamplesDRYING,WEIGHING AND GRADING
page 66 http://www.testmould.com
MECHANICAL BALANCE
General description
Name Max.Capacity
ResolvingPower
Pallet size
MBT-20 Two rulerdamping balance
2000g 0.1g 150mm
WEIGHTS FOR BALANCES
General description
Max.Capacity
Combination of the number
1g 2g 5g 10g 20g 50g 100g 200g 500g 1000g 2000g
100g 1 1 2 1
200g 1 1 2 1 1
500 1 2 1 1 2
1000g 1 2 1 1 2 1
2000g 1 2 1 1 2 1 1 2 1 1
5000g 1 2 1 2 1 1 2 1 1 2 1
Usage: It mainly is used for measuring, transferring of scale value in factories and outside calibration and inspection ofall kinds of electronic balances. It also is used for mating of all kinds of balances in laboratory and schools for qualityanalyze.
Material: All kinds of stainless steel without magnetism, copper, A3 steel etc. The stainless steel without magnetismaccords with OIML international suggestion R111 requirements.The products are divided as whole set weights combination, single calibration balance.
Package: With package or without package (M grade), wood carton, or plastic carton
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 66/83
Sample gradingDRYING,WEIGHING AND GRADING
http://www.testmould.com page
67
TEST SIEVES
STANDARD:
The range of sieves offered include ISO, EN, BS and
ASTM sieves.
Aperture Size Frame Dimeter200mm
Frame Diameter300mm
38μm TPS02-0400 TPS03-0400
45μm TPS02-0325 TPS03-032553μm TPS02-0270 TPS03-027063μm TPS02-0230 TPS03-0230
75μm TPS02-0200 TPS03-020090μm TPS02-0170 TPS03-0170106μm TPS02-0140 TPS03-0140125μm TPS02-0120 TPS03-0120150μm TPS02-0100 TPS03-0100180μm TPS02-0080 TPS03-0080212μm TPS02-0070 TPS03-0070250μm TPS02-0060 TPS03-0060300μm TPS02-0050 TPS03-0050355μm TPS02-0045 TPS03-0045425μm TPS02-0040 TPS03-0040500μm TPS02-0035 TPS03-0035600μm TPS02-0030 TPS03-0030710μm TPS02-0025 TPS03-0025
850μm TPS02-0020 TPS03-00201.00mm TPS02-0018 TPS03-00181.18mm TPS02-0016 TPS03-00161.40mm TPS02-0014 TPS03-00141.70mm TPS02-0012 TPS03-00122.00mm TPS02-0010 TPS03-00102.36mm TPS02-0008 TPS03-00082.80mm TPS02-0007 TPS03-00074.00mm TPS02-0005 TPS03-00054.75mm TPS02-0004 TPS03-00046.70mm / /
Woven wire test sieves Specification
There are two kinds of test sieves we are produced. Oneis perforated plate sieves, and the other is woven wire test
sieves.The aperture size of perforated plate sieves is from 4mm to125mm. the woven wire sizes from 38μm to 850μm (1-4.75in mm). Two kinds of material we used, one is stainlessSteel, another is brass. Stainless steel or brass is generallyused in the construction of woven wire mesh that performsthe straining. These devices are very accurate, and arewidely used in all types of laboratory particle analysis.
Introduction
Aperture Size Frame Dimeter200mm
Frame Diameter300mm
4.00mm TPH02-1500 TPH03-2500
4.75mm TPH02-1510 TPH03-25105.00mm TPH02-1515 TPH03-25155.60mm TPH02-1520 TPH03-2520
6.30mm TPH02-1525 TPH03-25256.70mm TPH02-1530 TPH03-25307.10mm TPH02-1535 TPH03-25358.00mm TPH02-1540 TPH03-25409.50mm TPH02-1550 TPH03-255010.0mm TPH02-1555 TPH03-255511.2mm TPH02-1560 TPH03-256012.5mm TPH02-1565 TPH03-256513.2mm TPH02-1570 TPH03-257014.0mm TPH02-1575 TPH03-257516.0mm TPH02-1580 TPH03-258019.0mm TPH02-1590 TPH03-259020.0mm TPH02-1595 TPH03-259522.4mm TPH02-1600 TPH03-2600
25.0mm TPH02-1605 TPH03-260526.5mm TPH02-1610 / 28.0mm TPH02-1615 TPH03-261531.5mm TPH02-1630 TPH03-263037.5mm TPH02-1640 TPH03-264040.0mm TPH02-1645 TPH03-264545.0mm TPH02-1650 TPH03-265050.0mm TPH02-1655 TPH03-265553.0mm TPH02-1670 TPH03-267075.0mm TPH02-1680 TPH03-268080.0mm TPH02-1685 TPH03-268590.0mm TPH02-1690 TPH03-2690106mm / TPH03-2700125mm TPH02-1710 TPH03-2710
Perforated sieves Specification
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 67/83
Sample gradingDRYING,WEIGHING AND GRADING
page 68 http://www.testmould.com
SIEVE SHAKER
Vibrating Screen is an up-to date laboratory automaticscreen designed and developed by our factory, applied toparticle analysis in the fields of pharmacy, metallurgy, foods,cosmetics and grain, and characterized by convenientoperation, no rotary component, and electronic controlledamplitude and frequency. Its performance index is equalto that of the vibrator with sieve manufactured by GermanFRITSCH. In comparison with the traditional manual screen,it can greatly reduce labor intensity of operators and raiseworking efficiency. It is an essential laboratory screen forparticle analysis.
TPZ-2 sieve shaker
TPZ-2 sieve shaker controller
The TPZ-1 High-frequency Sieve Shaker is mainly used forgraded analysis of non-cohesive and dry grain substance.
TPZ-1 sieve shaker
TPZ-1 Sieve shaker
Shaking frequency: 500 times/min.
Shaking method: up and downShaking amplitude: 1.5 mmTime setting: 0 – 60 min. selectableMotor power: 25 WSieve size: Ø200 x 50 mm (9pieces) or
Ø300 x 75mm (7pieces)Sieve opening: 20 – 0.75 mmPower supply: 220 V 50 HzDimension: 430 x 430 x 750 mmWeight: 16 kg
Operating range: ≤325 mesh
Vibration frequency: 3000 times/min, 6000 times/min
Amplitude selection: 0-3 mm, continuous adjustmentVibration mode: F ine v ib ra ti o n; I n te rm i tt en t
Vibration; Continuation VibrationWeight: 20 kgPower supply: AC220V±22V, 50Hz±1Hz
TPZ-2 sieve shaker
Sieve shaker
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 68/83
http://www.testmould.com Page 69
GeneralGENERAL
DIGITAL THERMOMETER
STANDARD: EN 12697-13
The meter is supplied without probes, which have to beselected and ordered separately.
DIAL INDICATORS
Dial indicators are precise measuring tools to transformlinear to angle one by mechanical transmission devices.
They are mainly used to measure the linear size, shape andposition errors of various workpieces.
Features: Steel body, metal dial adjustable ring,Semi-seal cap, Diameter of dial is dia.58.5mm.
Specification
The type of transducer: K type thermocouple (NiCr-Niai.)
Resolution: 1°C Accuracy: 0°C to 500°C: ± (0.75%+1°C)
500°C to 750°C: ± (1%+1°C)0°C to -20°C: ±2°C-20°C to -40°C: ±3°C-40°C to -50°C: -4°C750°C to 1050°C: (-3% ~0%)1050°C to 1300°C: (-5% ~-3%)
Measure range: -50°C to 750°COperating Temperature: 0°C to 50°CRelative Humidity: ≤80% RHStoring Temperature: -30°C to 60°CRelative Humidity: ≤80% RH
Dimensions: 24×72×108 mmImpedance: 100 MΩ
Model Range (mm) Grad. (mm)
TP0501 0-3 0.01
TP0502 0-5 0.01
TP0503 0-10 0.01
TP0501B 0-3 0.01
TP0502B 0-5 0.01
TP0503B 0-10 0.01
TP0504 0-10 0.01
TP0505 0-10 0.01
TP0504B 0-10 0.01
TP0505B 0-10 0.01
TP0506 0-20 0.01
TP0507 0-25 0.01
TP0508 0-30 0.01
TP0506B 0-20 0.01
TP0507B 0-25 0.01
TP0508B 0-30 0.01
TP0601 0-0.25 0.005
TP0602 0-0.5 0.005
TP0603 0-0.1 0.005
TP0604 0-0.25 0.001
TP0605 0-0.5 0.001
TP0606 0-1 0.001
EL82-5442 Digital Thermometer.
EL82-5442 Digital Thermometer.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 69/83
Page 70 http://www.testmould.com
GeneralGENERAL
Introduction
It is made of stainless steel. For measuring wet filmthickness of paints, enamels, laquers, adhesives& manyother wet coatings that are sprayed, dipped or brushed ona smooth surface.
BURETTES
MEASURING PIPETTES
WET FILM THICKNESS GAUGE
Cate. No Capacity
(ml)
Accuracy limits
±ml
Graduation
Divisions(ml)Grade A Grade B
Accuracy limits
604 02-5 5 0.01 0.02 0.02604 02-10 10 0.025 0.05 0.05604 02-25 25 0.05 0.10 0.10
604 02-50 50 0.05 0.10 0.10
604 02-100 100 0.10 0.20 0.20
Cat.No Capacityml
A c c u r a c ylimits±ml
Graduationdivisions ml
Heightmm
629 02-0.1 0.1 0.004 0.001 355
629 02-0.2 0.2 0.006 0.002 355629 02-0.5 0.5 0.010 0.01 355629 02-1 1 0.015 0.01 355629 02-2 2 0.025 0.02 355629 02-5 5 0.05 0.05 355629 02-10 10 0.10 0.1 355629 02-25 25 0.20 0.1 450
629 02-50 50 0.20 0.2 495
LAB MEASURLING CYLINDER
Cat. NO. Capacityml
ID x Heightmm
PMC-10 10 10 x 180PMC-10 30 14 x 240PP-MC03 50 16 x 240PP-MC04 100 26 x 250PP-MC05 200 33 x 290PP-MC06 300 41 x 290PP-MC07 500 49 x 340
PP-MC08 1000 61 x 420
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 70/83
http://www.testmould.com Page 71
Glass and plastic wareLABORATORY GLASSWARE
202 Beaker, Tall Form, Graduated
202 Beaker, Tall Form, Graduated
Cat.No Capacityml
Grad.rangeml
O.D×Height.mm
Grad.Intervalml
202-50 50 10-40 38×70 10202-100 100 20-80 48×80 10202-150 150 20-140 54×95 20202-250 250 25-200 60×120 25202-300 300 50-250 64×125 25202-400 400 50-350 70×130 25202-500 500 100-400 75×140 50202-600 600 100-500 80×150 50202-800 800 100-750 90×175 50202-1L 1000 100-900 95×180 50202-2L 2000 200-1800 120×240 100202-3L 3000 250-2500 135×280 250
201 Beaker, low Form, Graduated
201 Beaker, low Form, Graduated
Cat.No Capacityml
Grad.rangeml
O.D×Height.mm
Grad.Intervalml
201-5 5 - 22×30 -201-10 10 4-8 26×35 4201-20 20 10-15 32×43 5201-25 25 10-15 34×50 5201-50 50 10-40 42×60 5201-100 100 20-80 50×70 10201-150 150 20-140 60×80 10201-200 200 25-175 66×90 10
201-250 250 25-200 70×95 25201-300 300 25-250 74×105 25
201-400 400 50-350 80×110 25201-500 500 50-400 85×120 25201-600 600 100-500 90×125 50201-800 800 100-750 100×135 50201-1L 1000 100-900 105×145 50201-2L 2000 200-1800 130×185 100201-3L 3000 300-2800 150×210 100201-4L 4000 500-3500 161×253 500201-5L 5000 500-4500 170×270 500
401 01 Erlenmeyer Flasks
401 01 Erlenmeyer Flasks
Cat.No Capacityml
N e c k .O.Dmm
Flask. O.Dmm
Heightmm
401-01-50 50 26 54 80401-01-100 100 32 66 106401-01-150 150 32 75 124401-01-200 200 34 79 132401-01-250 250 34 85 140401-01-300 300 34 90 162
401-01-500 500 38 103 184401-01-1L 1000 45 131 214
401-01-2L 2000 50 166 280401-01-3L 3000 50 187 310401-01-5L 5000 50 220 365
402 01 Erlenmeyer Flasks with ground in glass stopper
402 01 Erlenmeyer Flasks in glass stopper
Cat.No Capacityml
JointStandardTaper
Diam ofbodymm
Heightmm
402-01-50 50 14.5/23 51 85402-01-100 50 18.8/26 51 85402-01-150 100 14.5/26 64 105402-01-200 100 18.8/26 64 105402-01-250 250 18.8/26 85 140402-02-250 250 29.2/32 85 140402-03-250 250 40/45 85 140402-01-500 500 29.2/32 105 175
402-02-500 500 40/45 105 175402-01-1L 1000 40/45 131 220402-01-2L 2000 40/45 166 280
402-01-3L 3000 40/45 187 310
402-01-5L 5000 40/45 220 385
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 71/83
Page 72 http://www.testmould.com
Glass and plastic wareLABORATORY GLASSWARE
404 FLASKS flat bottom
404 Flasks flat bottom, long neck
Cat.No Capacityml
Diam ofneck(mm)
Diam of bodymm
Heightmm
404-50 50 22 50 105404-100 100 22 64 115404-250 250 34 85 145404-500 500 34 105 175404-1L 1000 42 131 210404-2L 2000 50 166 260404-3L 3000 50 195 305404-4L 4000 50 207 315
404-5L 5000 56 230 345404-6L 6000 65 236 355404-10L 10000 70 279 420
Cat.No Capacityml
Socketsize(mm)
Heightmm
417 04-25 25 98 14/23417 04-50 50 114 14/23417 04-100 100 140 14/23
417 03 FLASKS two neck
417 03 Flasks two neck
417 04 FLASKS three neck
417 04 Flasks three neck
Cat.No Capacityml
Centresocket Size
Side Socketsize(mm)
Heightmm
417 03-25 25 14/23 14/23 98417 03-50 50 14/23 14/23 114417 03-100 100 14/23 14/23 140
407 FLASKS,round bottom
407 FLASKS,round bottom,long neck
Cat.No Capacityml
Diam ofneck(mm)
Diam of bodymm
Heightmm
407-50 50 22 50 100407-100 100 22 64 110407-250 250 34 85 140407-500 500 34 105 170407-1L 1000 42 131 200407-2L 2000 50 166 250407-3L 3000 50 195 295407-4L 4000 50 207 300
407-5L 5000 56 230 320407-6L 6000 65 236 340407-10L 10000 65 279 400
620 01 VOLUMETRIC FLASKS
Cat.No Capacityml
A c cu r a c ylimits±ml
StopperSize
O.D×Heightmm
620 01-25 25 0.03 10/13 37×110620 01-50 50 0.05 10/13 49×140620 01-100 100 0.10 12.5/14 60×170620 01-200 200 0.15 14.5/15 75×210620 01-250 250 0.15 14.5/15 80×220620 01-500 500 0.25 18.8/17 100×265620 01-1L 1000 0.40 18.8/17 127×315620 01-2L 2000 0.60 24/20 160×375620 01-5L 5000 1.20 34.5/35 221×470
529 FLASKS distilling
Cat.No Capacityml
Neck.O.D.mm
Flask.O.D.mm
Heightmm
Sidearm(mm)O.D Length
529-50 50 22 53 135 7 80529-100 100 22 66 174 7 100529-250 250 24 86 216 8 125529-500 500 30 109 275 8 150529-1L 1000 35 135 320 9 180529-2L 2000 42 168 408 10 225529-3L 3000 48 192 450 11 250529-5L 5000 57 230 530 12 290
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 72/83
http://www.testmould.com Page 73
Glass and plastic wareLABORATORY GLASSWARE
617 01 Measuring cylinders
Cat.No Capacityml
A ccur acylimits±ml
O.Dmm
Heightmm
617 01-10 10 0.2 16 137
617 01-25 25 0.5 21 162
617 01-50 50 0.5 26 197617 01-100 100 1.0 30 257617 01-250 250 2.0 42 310617 01-500 500 5.0 54 360617 01-1L 1000 10.0 70 440617 01-2L 2000 20.0 90 515
305 03 Reagent bottles
Cat.No Capacityml
Max. O.D.mm
Heightmm
Neck stocketsize
305 03-50 50 44 77 14/15
305 03-100 100 54 95 14/15305 03-250 250 73 129 19/26305 03-500 500 89 162 24/32305 03-1L 1000 111 200 29/32305 03-2L 2000 138 246 29/32305 03-5L 5000 186 318 45/40305 03-10L 10000 234 389 60/46
306 Tall form; 307 low from weighing
306 307 Weighing bottle tall form and low form
Cat.No Mouth dia.×Height mm
306 01-25 25×25
306 02-25 25×30
306 03-25 25×40
306 04-25 25×50
306 05-25 25×60
306 01-30 30×30
306 02-30 30×40
306 03-30 30×50306 04-30 30×60
306 05-30 30×70
306 01-40 40×50
306 01-45 45×30
306 02-45 45×70
Cat.No Mouth dia.×Height mm
307 01-30 30×20
307 02-30 30×25
307 01-35 35×25
307 02-35 35×70
307 01-40 40×20
307 02-40 40×25
307 03-40 40×30
307 04-40 40×70307 01-45 45×25
307 02-45 45×30
307 01-50 50×30
307 01-60 60×30
307 02-60 60×40
307 03-60 60×35
307 01-70 70×30
307 02-70 70×35
307 03-70 70×40
305 03 Reagent bottles
628 02 PIPETTES volumetric one-mark
Cat.No Capacityml
Accuracylimits±ml
Heightmm
628 02-1 1 0.015 330
628 02-2 2 0.02 340628 02-5 5 0.03 400628 02-10 10 0.04 450628 02-20 20 0.06 560628 02-25 25 0.06 570
628 02-50 50 0.10 600628 02-100 100 0.16 640
628 02 Pipettes volumetric one-mark
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 73/83
Page 74 http://www.testmould.com
Glass and plastic wareLABORATORY GLASSWARE
618 Measure cone shape conical
618 Measure cone shape conical
Cat.No Capacityml A ccuracylimits±ml
Graduationdivisionsml
Heigtmm
618-5 5 0.2 1.0 85618-10 10 0.4 1.0 100618-20 20 0.5 2.0 115618-50 50 1.0 5.0 140618-100 100 1.5 10.0 170618-250 250 3.0 25.0 200618-500 500 6.0 25.0 250618-1L 1000 10.0 50.0 315
803 Funnels with long stem
Cat.No Top.O.Dmm
Stem mmLength O.D
803-55 55 150 6803-70 70 150 6803-80 80 150 6
801 FUNNELS with short stem
801 Funnels with short stem
Cat.No Top.O.Dmm
Stem mmLength O.D
801-45 45 45 7801-50 54 50 7801-60 64 60 8801-70 74 70 8801-80 84 80 10801-90 94 90 10801-100 100 100 10
009 02 SEPARATING FUNNELS
009 02 Separating Funnels
Cat.No Top.O.Dmm
Stem mm Standardhollowkey norminal size
Socket Size
Length O.D
009 02-50 50 60 9 3NS 19/26009 02-100 100 60 9 3NS 19/26009 02-250 250 60 9 4NS 29/32009 02-500 500 60 10 4NS 29/32009 02-1L 1000 60 10 6NS 29/32009 02-2L 2000 60 10 6NS 29/32
803 FUNNELS with long stem
005 01 FUNNELS
Cylindrical
005 01 Funnels Cylindrical
Cat.No Top.O.Dmm
Stem mm Standard hollowkey norminal size
SocketSize
Length O.D
005 01-50 50 150 9 3NS 19/26005 01-100 100 150 9 3NS 19/26005 01-250 250 150 10 4NS 29/32
005 01-500 500 150 10 4NS 29/32005 01-1L 1000 150 10 6NS 29/32
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 74/83
http://www.testmould.com Page 75
Glass and plastic wareLABORATORY GLASSWARE
Cat. NO.O.D.mm
208 01-40 40208 01-50 50208 01-60 60208 01-80 80208 01-100 100208 01-125 125208 01-150 150208 01-200 200208 01-250 250
208 01 WATCH GLASS DISHES
Cat. NO. Nominal sizeO.D×Heightmm
CoverO.Dmm
BaseO.Dmm
304-60 60×17 62 60304-75 75×17 77 75304-90 90×20 93 90304-100 100×22 103 100304-150 150×32 154 150304-200 200×32 204 200
304 PETRI DISHES
Cat.No Straight rimCat.No.
O.D.mm
Lengthmm
Wallmm
601 03-01 601 04-01 10 100 1.0±0.1601 03-02 601 04-02 10 100 1.0±0.1601 03-03 601 04-03 12 75 1.0±0.1601 03-04 601 04-04 12 100 1.0±0.1601 03-05 601 04-05 13 100 1.0±0.1601 03-06 601 04-06 16 125 1.3±0.1601 03-07 601 04-07 16 150 1.3±0.1601 03-08 601 04-08 18 150 1.3±0.1601 03-09 601 04-09 20 150 1.3±0.1601 03-10 601 04-10 20 180 1.3±0.1
601 03-11 601 04-11 20 200 1.3±0.1601 03 TEST TUBES
601 03 Test Tubes
Cat. NO. Sizemm
Max. I.Dmm
Porcelainplaindiameter mm
Overallheight mm
401 01-120 120 120 108 180401 01-160 160 160 148 230401 01-210 210 210 188 300401 01-240 240 240 220 340
401 01-300 300 300 280 420401 01-350 350 350 330 500
401 01 VACUUM DESICCATORS; 401 02 VACUUM DESICCATORS
401 01 Desiccators
Cat. NO. Sizemm
Max. I.Dmm
Porcelainplaindiametermm
Overallheight mm
401 02-120 120 29/32 108 227401 02-160 160 34/35 148 285401 02-180 180 34/35 160 305401 02-210 210 40/38 188 347
401 02-240 240 50/42 220 381401 02-300 300 60/46 280 467401 02-350 350 71/51 330 544
401 02 Vacuum Desiccators
Cat. NO.Capacityml
PP-WB01 100
PP-WB02 250
PP-WB03 500
PP-WB04 1000
PP-WB wash bottle
PP-WB Wash bottle
Watch glass dishes
Petri dishes
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 75/83
PAGE 76 WWW.TESTMOULD.COM
Hardness testerNDT EQUIPMENT
CTH180 Hardness tester
CTH180 Hardness tester
CTH210 Hardness tester
Specification
Measuring range: ( 17 0- 96 0)HL D, (17- 68 .5 )
HRC,(19-651)HB, (80-976)HV,(30-100)HS, (59-85)HRA, (13-100)HRB
Measuring direction: 360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: segment LCDData memory: max. 100 groups (relative to
impact times 32~1)
Working voltage: 3V(2 AA size alkaline battery)
Continuous working period about 100 hours (Withbacklight off)Communication interface: RS232
CTH210 Hardness tester
Specification
Measuring range: ( 17 0- 96 0)HL D, (17- 68 .5 )HRC,(19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA,(13-100)HRB
Measuring direction: 360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HS
Display: Dot matrix LCD,128×64 dotsData memory: Max. 500 groups (relative to
impact times 32~1)
Working voltage: 3V(2 AA size alkaline battery)
HARDNESS MEASUREMENT
Ideal for site testing of the hardness of compression platens,cement moulds and any other steel or cast iron piece within
the operating range described below. It can be connectedto PC or printer by the RS 232 output for data processingand print.
Main features:- Compact metal case, suitable for use under poorworking conditions. Test at any angle,even upside down.- Wide measuring range. It can measure the hardness of
all metallic materials. Direct display of hardness scalesHRB, HRC, HV, HB, HS, HL- Large screen(128×64 dot matrix LCD), showing allfunctions and parameters. With EL background light.- Software calibration function.- Software to connect with PC via RS232 port. Microprinter support.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 76/83
Hardness testerNDT EQUIPMENT
WWW.TESTMOULD.COM PAGE 77
CTH320 Hardness tester
CTH320 Hardness tester
Specification
Measuring range: HLD(170~960)HLDMeasuring direction: 0°~360°
Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: Dot matrix LCD, 128×64 dotsData memory: 500 groups max.(relative to impact
times 32~1 )Printing paper: Width is (57.5±0.5)mm, diameter is
30mm.Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous workingperiod:
about 150 hours (With backlight off,no printing)
Communicationinterface:
USB1.1
Outline dimensions: 212mm×80mm×32mm
CTH310 Hardness tester
CTH310 Hardness tester
HL200 Hardness tester
HL200 Hardness tester
Specification
Measuring range: HLD(170~960)HLDMeasuring direction: 0°~360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: segment LCDData memory: 100 groups max.(relative to impact
times 32~1 )Printing paper: Width is (57.5±0.5)mm, diameter is
30mm.Battery charger: 9V/500mA
Continuous workingperiod:
about 150 hours (With backlight off,no printing)
Communicationinterface:
USB1.1
Outline dimensions: 212mm×80mm×32mm
Specification
Measuring range: HLD(170~960)HLD, , (17-68.5)HRC,(19-651)HB,(80-976)HV,(30-
100)HS,(59-85)HRA,(13-100)HRBMeasuring direction: 0°~360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: Dot matrix LCD,128×64 dots
Data memory: 500 groups max.(relative to impacttimes 32~1 )
Battery charger: 3V (2 AA size alkaline batteryContinuous workingperiod:
about 50 hours (With backlight off)
Communicationinterface:
USB1.1
Indicating value error: HLD: ±5 HRC: ±1 HB: ±4
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 77/83
PAGE 78 WWW.TESTMOULD.COM
Hardness testerNDT EQUIPMENT
ROCKWELL HARDNESS TESTER
Portable Rockwell Hardness Tester
ModelOpening Size(W×D)
mm
NetWeight
KG
Application
Aluminum alloy, copper alloy, stainlesssteel, steel, carbide etc.
RHT-P1 25×25 0.7 Thickness of test piece: 1--25mm,
Diameter of cylinder Ø: 3--25mmRHT-P2 50×50 1.2kg Thickness of test piece: 1--50mm, Diameter
of cylinder Ø: 3--50mmRHT-P3 100×50 1.5kg Thickness of test piece or diameter of
cylinder <100mmRHT-P4 100×100 2.5kg Thickness of test piece or diameter of
cylinder <100mm
The tester is suitable for testing a wide range of metals from soft metals tovery hard alloys, including aluminum alloys, copper, copper alloys, mild steel,stainless steel, quenched steel, tempered steel, carburized steel, and carbide.With a variety of anvils, the tester can be used to test sheets, cylinders andother materials of different shapes. It can also test the hardness of pipes fromboth inside and outside
RHT-P2
Initial Test Force: 10 kg• Major Test Force: 60 kg, 100 kg or 150 kg• Accuracy: ±1.5HRC• Precision: ±0.5 HR• Versatility: tests in the hand or on the desk; tests long, heavy specimens• without cutting.
Superficial Rockwell Hardness Tester
The PHR portable superficial Rockwell hardness testers are a variety of theRockwell hardness testers. They have smaller test forces and thus smallerindentation, used to test the hardness of thin and small workpiceces such asthin metal sheets, tubings, thin shafts, small balls, case hardened materials andother metal parts which require indentation as small as possible.
RHT-S1
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 78/83
Hardness testerNDT EQUIPMENT
WWW.TESTMOULD.COM PAGE 79
Model Opening Size
(W×D)mm
Net
Weightkg
Application
RHT-S2 25 × 25 0.7 thin sheet, thin wall pipe, small component
and workpiece with hardened surface by
carburizing, nitriding and high-frequency
quenching. Thickness > 0.15mmRHT-S2 50 × 50 1.2 thin sheet, thin wall pipe, small component
and workpiece with hardened surface by
carburizing, nitriding and high-frequency
quenching. Thickness > 0.15mmRHT-S3 100 × 50 1.5 workpiece with hardened surface by
carburizing, nitriding and high-frequency
quenching. Thickness or diameter of test
piece > 100mm
Initial Test Force: 3 kg• Major Test Force: 15 kg, 30 kg or 45 kg• Accuracy: ±1.5HRC• Precision: ±0.5 HR• Versatility: tests in the hand or on the desk; tests long, heavy specimens• without cutting.
Superficial Rockwell Hardness Tester for Tubings
Model Opening Size(W×D)mm
NetWeightkg
Application
RHT-ST1 25 × 25 2.5kg slim, thin wall metal pipe of inner diameter
Ø > 4.8mm
It is designed with a round anvil to test the hardness of slim and thin tubes ofsoft metallic materials.
RHT-ST1
Large Rockwell Hardness Tester
The large hardness test for large workpieces such as large or extra largemoulds, castings, forgings, shafts, rollers, pipes and assembled parts as wellas other large machinery parts such as annealed, quenched, high frequencyquenched, and carburized metal parts.
RHT-L1
Superficial Rockwell Hardness Tester(continued)
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 79/83
PAGE 80 WWW.TESTMOULD.COM
Hardness testerNDT EQUIPMENT
Large Rockwell Hardness Tester(continued)
Model Opening Size
(W×D)mm
Net
Weightkg
Application
RHT L1 200 × 100 4 aluminum alloy, copper alloy, stainless steel,
steel, carbide etc. Thickness of test piece or
diameter of cylinder <200mmRHT L2 200 × 250 5.2 aluminum alloy, copper alloy, stainless steel,
steel, carbide etc. Thickness of test piece or
diameter of cylinder <200mmRHT L3 500 ×300 8.9 aluminum alloy, copper alloy, stainless steel,
steel, carbide etc.Thickness of test piece or
diameter of cylinder <500mm
Chain Clamp Rockwell Hardness Testers
RHT Chain Clamp Rockwell Hardness Tester is used for on-site test the largeshafts, rollers, mouldings and steel tubes with cylindrical surface. This typeof hardness tester can be used for testing the hardness of metal products insegments and of the steel-tube welding lines. It provides an unprecedentedmethod to test the hardness of large-sized cylindrical workpieces.
Item Opening Size(Diameter) Weight
RHT C1 200mm-500mm 4kg
RHT C2 450mm-850mm 5kg
RHT C3 800mm-1600mm 7.5kg
RHT-C1
RHT-M1
Magnetic Type Brinell & Rockwell Hardness Tester
The test head of the Brinell & Rockwellhardness tester is adsorbed on thesurface of iron and steel by magneticforce, without giving support to thetest piece.
Initial Test Force: 10 kg• Rockwelll Test Force: 60 kg, 100 kg or 150 kg
• Brinell Test Force: 62.5kg, 125kg, 187.5kg• Indenter: 120°diamond cone dia. 1.588mm, dia. 2.5mm, dia. 5mm carbide balls• Force Applying Method: by screw• Maximum Magnetic Force: >350kg• Test Range : Rockwell hardness HRC, HRB, HRA etc. 15 scales Brinell hardness HB 30,•
HB 10, HB 5, HB 2.5 etc. 4 testing conditionsResolution: Rockwell hardness 0.5HR, Brinell hardness indentation diameter 0.01mm• Accuracy: Meets the requirements of ISO6506/6508• Minimum Specimen Size: 60×180 mm• Net Weight: 4.9kg• Package Gross Weight: 8.2kg•
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 80/83
Hardness testerNDT EQUIPMENT
WWW.TESTMOULD.COM PAGE 81
BRINELL HARDNESS TESTER
Portable Brinell Hardness Tester is designed on basis of the basic theory ofBrinell Hardness Testing. The testing load is accurately controlled by shear pin.
The indentation diameter is read by reading microscope after the indentationis indented on test specimens. Brinell testing result can be obtained throughchecking appendix.
Test force: 1580kg;• Accuracy of test force:• < 1%;Indenter: dia. 7.26mm steel ball indenter (testing range: 100-400HB);• (Optional) dia. 4.0mm carbide ball indenter (testing range: 400-650HB)• Opening size (W×D):150mmx100mm• Net weight: Bench type: 5.1kg ;Portable type:•
4.2kg ;Hammer impact type: 0.8kg
BHT
WHT
WEBSTER HARDNESS TESTER
W Series Webster Tester is a portable instrument which can on-site test softmetals quickly. The Webster Hardness Tester is used to inspect the result ofheat treatment, to sort the materials in the warehouse, and to test the longworkpieces inconvenient taken to the lab. The Webster hardness tester is verysuitable for quality inspection of batch products one by one in the productionfield. The hardness value can be read directly on the indicator dial.
Model Dimension ofspecimen
NetWeightKG
Application
WHT-20 0.4 - 6mm 0.5 regular type for aluminum alloy profile, pipe and sheet
WHT-20a 0.4 - 13mm 0.5 thick wall aluminum alloy material
WHT-20b Min Dia: 6 0.5 aluminum alloy pipe of small diameter and aluminum alloy
WHT-BB75 Thickness: 0.4 - 6mm 0.5 copper and soft copper alloys such as annealed brass
WHT-BB75b Min Dia: 6mm 0.5 copper or annealed brass pipe
WHT-B75 Thickness: 0.4 - 6mm 0.5 extra-hard aluminum, brass
WHT-B75b Min Dia: 6mm 0.5 slim extra-hard aluminum or brass pipe
WHT-B92 0.4 - 6mm 0.5 soft steel materials not exceeding 230 HV, such as cold rolled sheet,
hot rolled sheet and galvanized sheet etc.
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 81/83
PAGE 82 WWW.TESTMOULD.COM
Thickness gaugeNDT EQUIPMENT
CT200 Thickness gauge
CT200 Thickness gauge
Specification
Display: 128×64 dot matrix LCD with ELbacklight.
Measuring Range: 0.75~300mm (in Steel)Sound Velocity
Range:
1000~9999 m/s
Resolution: 0.1/0.01mm (selectable)
Accuracy: ±(0.5%Thickness+0.04)mm
Units: Metric/English unit selectable
Four measurements readings per second for single point
measurement, and ten per second for ScanMode.
Memory for 20 files (up to 99 values for each file) of stored
values.
Upper and lower limit can be pre-set. It will alarm automatically
when the result value exceeding the limit.Power Supply: Two “AA” size, 1.5 volt alkaline batteries.
100 hours typical operating time (EL
backlight off).
Communication: RS232 serial port
Case: Extruded aluminum body suitable for use
under poor working conditions.
Outline Dimension: 132Height X 76.2Width mm.
Weight: 345g
CT150 Thickness gauge
Specification
Display: 4.5 digits LCD with EL backlight
Measuring Range: 0.75~300mm (in Steel)Sound VelocityRange:
1000~9999 m/s
Resolution: 0.1mm Accuracy: ±(0.5%Thickness+0.04)
mm,depends on materials andconditions
Units: Metric/Imperial unit selectableFour measurements readings per second for single pointmeasurement, and ten per second for Scan Mode.Memory for 20 files (up to 99 values for each file) ofstored values.Power Source: Two “AA” size, 1.5 Volt alkaline
batteries. 100 hours typical operatingtime (EL backlight off)
Outline Dimension: 150×74×32 mmWeight: 245g
CT150 Thickness gauge
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 82/83
Universal testers. Steel mechanical testingSTEEL
http://www.testmould.com page
83
COMPUTER CONTROLLED UNIVERSALTESTING MACHINES
This machine is a new-type universal material testingmachine based on the pendulum on, it can quicklydetermine the materials' max force value and the yieldpoint correctly.It is mainly used for metal and nonmetal materials tensile,compression, bending and Shear and other mechanicalperformance test.
TP-1000S universal testing machine
Specification
Max. load: 1000 kNMeasuring range andminimum value:
don't divide scale,equivalent 3
Resolution: 0.1 kN
Displacement variant accuracy: ± 0.5%
Force measurement range: 4-100% F S
Force measurement precision: ± 1%Round sample clamping dia.: 20-60mmFlat specimen clamping thickness: 0-40mmFlat specimen max. width: 75mm (or custom)
Max. distance between bending: 500mmShear specimens dia.: 10mmThe tensile space: 600mmCompression space: 600mm
Piston stroke: 250mmEffectively distance between the twopillars tensile space:
550mm
Test table rise speed(max.):
≥70mm /min
Lower jaw singkang speed: ≥200mm /minOil pump motor power: 225 kWBeams and mobile power: 0.55 KWOverall dimension(mm): 1060×760×2500Weight: 3200 kg
This tester uses hydraulic load, digital control instrumentshows results, convenient operation, accurate and reliabledate,it can do generally steel and other metal materialstensile, compression, bending and cutting experiment,also do generally materials, plastic, cement and concretecompression and bending test.
TP-600BC Universal testing machine
TP-600BC Universal testing machine
Specification
Max. load: 600 kNMeasuring range andminimum value:
don't divide scale,equivalent 3
Resolution: 0.1 kNDisplacement relative error: ± 1%Clamping type: Manual
Round sample clamping dia.: 13-40mmFlat specimen clamping thickness: 0-15mmFlat specimen max. width: 75mm
Max. distance between platens: 650mmShear specimens dia.: 75mmMax distance between the tension
jaws:
650mm
Max. distance between the bendingbivots:
600mm
Platen dia.: 160mmDistance between the two pillars inthe tensile space:
500mm
Oil pump motor power: 1.3 kWBeams and mobile power: 0.75 KWOverall dimension(mm): 720×580×2100Weight: 2100 kg
TP-1000S universal testing machine
7/23/2019 Catalogo Testing. China
http://slidepdf.com/reader/full/catalogo-testing-china 83/83
Universal testers. Steel mechanical testingSTEEL
DYNAMOMETER DISPLAYHYDRAULIC UNIVERSAL TESTING MACHINES
WE-1000A Dynamometer Display Hydraulic
Universal Testing Machine
Specification
Max. capacity (kN): 1000Measuring range: 4%-100% of FSRelative error of reading: ≤± 1%Clamping method: Hydraulic
clampingRound sample clamping dia.range(mm):
13-60
Flat specimen clamping range(mm): 0-40Flat specimen max. width(mm): 125Max. tension test space(mm): 780Max. compression test space(mm): 650Dynamometer dimensions (mm): 1050×770×1775
Load frame dimensions(including piston stroke) (mm): 1255×866×3900
Motor power (KW): 2.3Load frame weight (KG): 5000Column net distance (mm): 675Compression platen size (mm): 204×204Span of bending roller (mm): 1000Width of bending roller (mm): 140
Allowable camber (mm): 150Max. piston stroke (mm): 250Piston max. speed (mm/min): Approx. 50Crosshead max. speed (mm/min): Approx 150Displacement device: ruler
STANDARD: In accordance with or exceed the
requirements of the ISO6892.
WE-1000A Dynamometer Display Hydraulic Universal Testing Machine
FLEXURAL TESTING MACHINES TF-5000 EPS strength and Flexural test machine
Specification
Load: 0-5000N interval matching
Force resolution 1/10000Force accuarcy: ≤0.5%Force magnification: 7 automatic switchDisplacement accuracy: ≤0.5%
Metal extension project resolution:
1/1000
Metal extension project accuracy:
≤0.5%
Large deformation ± 1mm