catalogue 2013 - integrated · pdf filecatalogue 2013. index air con service equipment.....1...

INTEGRATED MARKETING (PTY) LTD

Unit10, Keymax Industrial Park

1006 Ergon street

Lyttelton Ext 6

Tel: 012 664 3556

Fax: 086 568 8466

E-mail: [email protected]

VAT No: 4040202949 Co. Reg No. 1982/011003/07

CATALOGUE 2013

http://site.integratedmarketing.co.za/our-products/im-branded/

http://site.integratedmarketing.co.za/our-products/atek-makina/

http://site.integratedmarketing.co.za/priman/

http://site.integratedmarketing.co.za/our-products/bright-equipment/





INDEX

AIR CON SERVICE EQUIPMENT.....................................................1AUXILIARY JACKS...........................................................................1 AIR COMPRESSOR.......................................................................22BEAD BLASTER..............................................................................2BEAD BREAKER.............................................................................2BEAD KNOCKER............................................................................2BOTTLE JACKS...............................................................................2BRAKE DISC SKIMMER..................................................................3COIL SPRING COMPRESSOR..........................................................4ENGINE CRANE.............................................................................4 ENGINE STAND..............................................................................5EXHAUST PIPE BENDER................................................................4GEARBOX JACK..............................................................................5HEADLIGHT AIMER ......................................................................5HYDRAULIC PUMP .......................................................................5HYDRAULIC RAM KIT .................................................................21IMPACT WRENCH 1” ....................................................................5LIFT – ONE SIDE .........................................................................21LIFT – TWO POST ......................................................................6-7LIFT – FOUR POST ........................................................................7LIFT – LOW LEVEL ........................................................................8LIFT – MID RISE ............................................................................8LIFT – MOTORCYCLE ...................................................................9LIFT –WHEEL ALIGNMENT ...........................................................9LIFT – SCISSORS ALIGNMENT ......................................................9NITROGEN EQUIPMENT ............................................................10PORTA POWER ...........................................................................11PRESS – HYDRAULIC ...................................................................11PRESS – ELECTRO HYDRAULIC....................................................11PRESS – PNEUMATIC ..................................................................11PRESSURE CLEANER ...................................................................17RIM REPAIR EQUIPMENT ...........................................................12SHOCK ABSORBER TESTER .........................................................20TOOL TROLLEY ...........................................................................13TRESTLES ....................................................................................14TROLLEY JACKS ...........................................................................14TYRE CHANGING TOOLS ............................................................15TYRE INFLATORS.........................................................................20TURN TABLES .............................................................................15TYRE CHANGERS ...................................................................15-16TYRE SPREADER .........................................................................17TYRE VULCANISER......................................................................17WELDER......................................................................................17WHEEL ALIGNMENT EQUIPMENT .............................................20WHEEL BALANCER.................................................................18-19WHEEL DOLLY ............................................................................21

Zell AC1000-3G Air-Con Service Station

AC1000-3G Specification & ConfigurationRefrigerant R134a

Operating Temperature 5 – 50 o C

Max pressure 18 bar

Power Supply 220v, 50Hz

Weight 95kg

Packing Size 50 x 70 x 107cm

HP/LP Gauge 80mm/class 1.0

Tank Gauge 40mm

LCD back lit 192 x 64 dot

HP/LP hoses 250cm / SAE-JS2196

Compressor 3/8hp, 14cc

Fan/ condenser Yes

Filter Drier 80kg

Vacuum Pump 120L/min, 4.2cfm

PAG bottle 250ml

Electronic Scale 1g / 30kg

R134a refrigerant

Zell AC1000-HFO Air-Con Service Station

HFO - R1234yf refrigerant

AC1000-HFO Specification & ConfigurationRefrigerant HFO-R1234yf

Operating Temperature 5 – 50 o C

Max pressure 18 bar

Power Supply 220v, 50Hz

Weight 95kg

Packing Size 50 x 70 x 107cm

HP/LP Gauge 80mm/class 1.0

Tank Gauge 40mm

LCD back lit 192 x 64 dot

HP/LP hoses 250cm / SAE-JS2196

Compressor 3/8hp, 14cc

Fan/ condenser Yes

Filter Drier 80kg

Vacuum Pump 120L/min, 4.2cfm

Tank 14.5 L

PAG bottle 250ml

Electronic Scale 1g / 30kg

IM-C/Jack- Auxiliary jack with hand pump

IM-6006- Auxiliary jack & cradle support 3 ton capacity - Air operated

Page 1

IM-6006- Auxiliary jack & cradle3 ton capacity - Air operated

IM-RJ 6 Auxiliary

Rolling Jack





Input pressure: 8 bar /120psi

Operating pressure: 6 - 8 bar / 87-116psi

Max. pressure: 10 bar / 145Psi

Rapid tyre inflation, after tyre fitting. Equipped with automatic

purge of over limit pressure., Supplied with Pressure Gauge

IM-BB-05IM-BB-10

Weight: 11kgDimension: 400x450x360mm

Weight: 15kgDimension: 600x480x360mm

IM- BB Bead BlasterIM- BBR Bead Knocker / Stamper

Y471130 – To be used on 5 piece rims 25” – 51”.

With pry bar / bead loosening pockets. G.W.14

OTR Bead Breaker for 5 piece rims

Universal Bead Breaker for 3 piece rims

Y471120 – Works on most single, two and three

piece rims

Pneumatic Bead Breaker - PAX ring remover

These professional bottle jacks meet the highest standards. All models have a chrome main ram and chrome pump piston. The

extension screws have a pressed tread. These units can be used horizontally and vertically.

Model Capacity Min

Height

Lifting

Height

Adj.

Height

Max

Height

N.W

Y410200 2 Ton 158 90 60 308 2.3

Y410400 4 Ton 180 110 60 350 3.3

Y410600 6 Ton 197 125 60 382 4.4

Y411200 12 Ton 214 125 60 399 7.2

Y412000 20 Ton 244 145 60 449 10.5

Y413000 30 Ton 285 180 0 465 14.6

Hydraulic Bottle Jacks

Page 2





IM- AA202D On car brake disc lathe

Maximum brake disc thickness 40mm

Adjustment knob accuracy ≤0.02mm -≤0.01mm

Feed rate 8.5mm/min

Electrical specifications 220V / 110V

Net weight 11kg

415 x 295

Drive Unit:

Working height min / max 1 / 1.20m

Drive speed 98rpm

Electrical specifications 220V / 110V

Weight 68kg

Ambient temperature range -20℃ to 40℃Year of construction show on information plate

Turning accuracy ≤ 0.005mm

Brake disc run out ≤ 0.005mm

Brake disc thickness variation 0.005 – 0.01mm

Brake disc surface roughness Ra 1.5 – 2.0um

Standard parts for BL-202D

IM- OTCL450A On car brake disc lathe

Maximum rotor turning diameter 360mm

Maximum Rotor Thickness 51mm

Maximum Rotor friction Surface Area 76mm

Feed Distance 110mm

Spindle Revolutions Variable Speed 30-120 RPM

Motor Power 1.5HP (1.1kw) @ 3450rpm

Electric Power AC220v 50/60Hz 15A

IM- C9350 Off car brake disc lathe

Spindle Travel 175mm

Spindle Speed 70, 80, 118 RPM

Min Spindle Feed Speed 0.05 mm per revolution

Max Spindle Feed Speed 0.50mm per revolution

Min Cross Feed Speed 0.05 mm per revolution

Max Cross Feed Speed 0.50 mm per revolution

Hand wheel Graduations 0.05mm

Rotor Diameter 180mm – 381mm

Rotor Thickness 48mm

Drum Diameter 152mm – 711mm

Drum Depth 175mm

Motor 1PH 220v 50/60 Hz / 3PH 380v 50/60Hz

Weight 200kg

Dimensions 970 x 920 x 1140mm

Drum Diameter 180-350mm

Slide Travel 100mm

Rotational Speed of spindle 60, 90 RPM

Feed 0.15mm per revolution

Motor Power 0.75Kw

Overall Dimensions 695mm x 565mmx 635mm

Packing Dimensions 710mm x 750mm x 730mm

Nett Weight 200kg

Gross Weight 230kg

IM- C9335B Off car brake disc / drum lathe

Page 3





IM- SD1201A Coil Spring Compressor

Capacity： 1Ton

Max. working length: 240mm

Ram travel: 240mm

Spring size: 4~6-1/2 inch

N.W.: 19.5kgs

G.W.: 20.5kgs

Package Size：650x265x165mm

Capacity： 1Ton

Max. working length: 450mm

Ram travel: 420mm

Spring size: 4~6-1/2 inch

Air pressure: 0.65-0.9MPa

N.W.: 63kgs

G.W.: 67kgs

Package Size：140.5x54.5x29cm

IM- SD1206 Coil Spring Compressor

Specifications

Maximum Load : 1500

Upper Yoke positions: 7

Lower Yoke Travel: 340mm

Spring Diameter: 102 – 160mm

Foot operated air hydraulic unit

IM- SD1205 Coil Spring Compressor

IM- AA0601D Hydraulic Engine Crane 3 ton

Rated loading capacity 3 ton

Maximum Height 2200 mm

G.W. 113kg

N.W. 118kg

Packing size 1130 x 810 x 110mm

1420 x 310 x 210mm

730 x 200 x 190mm

This 1 ton foldable crane constructed from heavy-gauge,

welded square tubular steel, includes the following

features: *Hold-to-run control safety system *Nylon

wheels *Ram and pump are combined into one unit to

eliminate hose and / or connections *4 positions to

secure arm *chrome ram * Rear wheels rotate 360

degrees *Safety feet at base to support stability when

crane is folded up.

*Max lifting height 1940mm *Min lifting

height 300mm

Page 4

•Maximum bending radius: 5" / 127 mm

•Minimum bending radius: 3-1/3" / 89 mm

•Maximum tube capacity: 3" / 76 mm / .095 wall

•Standard die pack (BB-1): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2"

•Top cylinder working force: 60,000 lbs. / 27,216 kg

•Dimensions: 42" x 62" x 31" / 1,067 mm x 1,575 mm x 787 mm

•Standard motor: 5 Hp / 208 - 230 VAC / 60 Hz / 1 pH

•Shipping weight: 1,264 lbs. / 573 kg

•Shipping dimensions: 48" x 70" x 30" / 1,219 mm x 1,778 mm x 762 mm

Hydraulic Pipe BenderY440101 Foldable Engine Crane 1 ton





Winntec Y471150 Hydraulic Foot Pump Aluminum

700 bar 10 000 psi air/hydraulic pump

with aluminium tank and internal relief

valve. Effective oil capacity 1600 cc. Air

exhaust muffler for quiet operation. Two

stage release mechanism. Pump, hold or

release load with pedal control. Air inlet

1/4 outlet 3/8.Working pressure 6-10 bar

BQ3 Gearbox / Transmission jacks

Capacity 1.5 Ton

Length: 1110mm

Width: 652mm

Height: 190 – 870mm

Net Weight: 130 kg

Capacity 1 Ton

Height: 1150-1960

Net Weight: 46 kg

Y451000 High Lift Gearbox Jack – 1 ton

A chrome main ram and hold-to-run control safety

system. The wide base provides optimum stability

and the efficient pump system ensures fast and

precise reach of the load.

IM- AA0101G Telescopic Gearbox Jack

Rated loading capacity 1 ton

Minimum Height 830mm

Maximum Height 1760mm

G.W. 89kg

N.W. 79kg


IM- HA8000 Headlight Aimer

Measuring Range:

Central Height of Headlight 50cm – 130cm

Light Intensity of High Beam +/- 100cd

Indication Error: Light Intensity of High Beam +/- 12%

Measure distance: 30 – 50cm

Power consumption <0.5W

Dimensions 590mm x 1810 mm x 590mm

Nett Weight 30kg

Environmental Temperature 5 – 40 degrees C

Relative humidity: Less than 95%

Atmosphere Pressure: 70 – 106 Kpa

Power Supply: 9v DC

(If AC power is used an inverter should be used)

Winntec Y450101 Engine Stand

Model Capacity Height Width Length N.W

Y450101 400KG 825 175 275 23

Capacity 400kg

Height 825mm

Width 175mm

N.W. 23kg

Scoda TT - Turn Tables, Mechanical

This portable tyre changer is equipped with professional

accessories, can be operated easily without power and

pneumatic supplies. It can work for different kinds of vehicle

tyres, such as MXT, ATV, scooter, and electro mobiles. It is

perfect for family garage, racing team, long driving journey,

emergencies, and different kinds of automobile garages.





Specifications – SA40

Lifting Capacity 4000 kg

Locking release Manual

Min Height 100 mm

Lifting Height 1900mm

Power of motor 2.2 kw

Oil Pressure 18 MPa

Power Supply 220v

Lifting time 50 s

Lowering Time 40 s

SA40 Two Post Lift with base plate – 4 ton capacity (Manual Release)

Floor plate design, more suitable for

low ceiling workshops. Single side

Manual lock release. Dual cylinders

located in Master and slave column.

Dynamic test 115% of the rated

capacity. Static test: 150% of the rated

capacity. Dual antic skidding safety

device from column ladder safety to

hydraulic seal protection. Special

hydraulic system designed to avoid

overload running. ABS control box,

24v low voltage control system. High

strength chain drive system. High

quality seals from Italy. Quality power

rack. CE Certified - Red

Specifications – SB40


Lock release Manual

Min Height 110 mm


Column Height 3722mm


Oil Pressure 18 MPa

Power Supply 220v/380v

Lifting time 50 s

Lowering Time 40 s

Clear floor design makes under-vehicle

service more convenient. Manual lock release

on both sides. Dual cylinders located in

Master and slave column. Dynamic test 115%

of the rated capacity. Static test: 150% of the

rated capacity. Dual anti skidding safety

device from column ladder safety to hydraulic

seal protection. Special hydraulic system

designed to avoid overload running. ABS

control box, 24v low voltage control system.

High strength chain drive system, High quality

seals from Italy. CE Certified - Red

SB40 Two Post Lift , Base free – 4 ton capacity (Manual Release)

Specifications – SAE40


Locking release Electrical

Min Height 100 mm



Oil Pressure 18 MPa

Power Supply 220v

Lifting time 50 s

Lowering Time 40 s

Reinforcement base plate for uneven floor

Floor plate design, more suitable for

low ceiling workshops. Single side

electrical lock release. Dual cylinders


Dynamic test 115% of the rated

capacity. Static test: 150% of the rated

capacity. Dual antic skidding safety

device from column ladder safety to

hydraulic seal protection. Special

hydraulic system designed to avoid

overload running. ABS control box,

24v low voltage control system. High

strength chain drive system. High

quality seals from Italy. Quality power

rack. CE Certified - Red

Page 6

SAE40 Two Post Lift with base plate – 4 ton capacity (Electric Release)

Reinforcement base plate for uneven floor





SBE40 Two Post Lift , Base free – 4 ton capacity (Electric Release)

Specifications – SBE40


Lock release Electric

Min Height 110 mm




Oil Pressure 18 MPa

Power Supply 220v / 380v

Lifting time 50 s

Lowering Time 40 s

Clear floor design makes under vehicle

service more convenient. Single side

electrical lock release. Dual cylinders


Dynamic test 115% of the rated capacity.

Static test: 150% of the rated capacity .Dual

antic skidding safety device from column

ladder safety to hydraulic seal protection

Special hydraulic system designed to avoid

overload running. ABS control box, 24v low

voltage control system. High quality seals

from Italy. High strength chain drive system

Quality power rack - Red

Specifications – SBE40H


Lock release Electric

Min Height 110 mm




Oil Pressure 18 MPa

Power Supply 220v / 380v

Lifting time 50 s

Lowering Time 40 s

Clear floor design makes under vehicle service

more convenient. Single side electrical lock

release. Dual cylinders located in Master and

slave column. Dynamic test 115% of the rated

capacity. Static test: 150% of the rated capacity

.Dual antic skidding safety device from column

ladder safety to hydraulic seal protection Special

hydraulic system designed to avoid overload

running. ABS control box, 24v low voltage

control system. High quality seals from Italy.

High strength chain drive system, Quality power

rack - Red

SBE40H Two Post Lift , Base free – 4 ton capacity - Extended Height (Electric Release)

Specifications – SA4T30


Lifting Height 1800 mm


Oil Pressure 18 MPa

Power Supply 220v

Lifting time 50 s

Lowering Time 40 s

SA3TP Four Post Exhaust Lift – 3.6 ton capacity

Hydraulic driven, cable lifting system. Single

side manual lock release. Four point

automatic safety locks. Width between

runways non adjustable. Integrated hydraulic

drive system. Conforms with CE requirements

Red

Page 7





IM - LR30 Low Level Lift

Specifications

Supply voltage : 220V

Power : 750W

Max. lifting weight 2.5T

Max. Lifting height 580mm

Lowered height 80mm

Total weight 375KG

Specifications

Supply voltage : 220V

Power : 1.5kW

Max. lifting weight 2.2T

Max. Lifting height 1000mm

Lowered height 130mm

Total weight 300KG

Lifting capacity: 2800kg

Max. lifting height: 400mm

Min. height: 120mm

Platform length: 1350mm

Platform width: 650mm

Approx. Weight: 550 kg

Air Operated

Double Air Bellow

IM – LR45 Heavy Duty Low Level Lift 4.5 ton

Lifting capacity: 4500KG

Max. lifting height: 580 mm

Min. height: 80 mm

Platform length: 1400 mm

Platform width: 580 mm

Product Length: 2100 mm

Product Width: 1900 mm

Scoda SCK-B30 Mid Rise Level Lift

IM– ABL2 Air Bellow Low Level Lift

Page 8

Lifting capacity: 3000KG

Max. lifting height: 1000 mm

Min. height: 110 mm

Platform length: 1400 mm

Platform width: 490 mm

Product Length: 1900 mm

Product Width: 1780 mm

IM – MRL27 Mid Rise Lift





IM- M03804 Air hydraulic Motorcycle (ATV) Lift

Capacity:1000lbs

Min.ht:200mm

Max.ht:850mm

Platform size:2225×605mm

Ramp size:605×550mm

N.W.:165kgs

G.W.:207kgs

Package size:229×67×29.5cm

IM-SD1010ND Air Motorcycle Lift with side ext.

IM-SLA Wheel Alignment Scissors lift

* Robust construction and super-balanced lifts for wheel alignment. * Flush mounted or

surface mounted if access ramps equipped * Electro-hydraulic jack * Leveling controlled

hydraulically * Mechanical safety lock with air operated engagement and release * Manual

emergency lowering * Adjustable position of turntable and longer sliding plate * Adjustable

jack frame * Limit switch for maximum lifting height * High quality hydraulic, pneumatic and

electric components

Specifications – SDW50


Lifting Height 1850 mm

Secondary lifting Height 450 mm

Secondary Lifting weight 3000 kg


Oil Pressure 18 MPa

Power Supply 220v

Lifting time 50 s

Lowering Time 40 s

Supplied with built in slip plates, recessed for turn tables and auxiliary jacking support

Cylinder located inside of the runway, perfectly protected. Electrical protection devices in

four columns ensure synchronization of runways. Adjustable runways to accommodates

different size vehicles . ABS control box, 24v low voltage control system. Hydraulic hose

and cable protection system . Single side manual lock release. Heavy duty cables, Top

limit switch. Aluminum motor with cooling fan. CE certified

SDW50 Four Post Wheel Alignment Lift – 5 ton capacity

Specifications – SLA


Max raised height 2160 mm

Min lowered height 290 mm

Jack raised height 450mm

Runway length 4800mm

Lenth of jack frame

extended

1600-

1800mm

Overall length 5000mm

Overall width 2050mm

Raised time 60 s

Page 9

Lifting Capacity 360kg

Minimum Height 180mm

Max Height 680mm

NW 107kg

GW 129kg


Platform size 1900 x 530 mm

Air Hydraulic pump. Front wheel clamp for securing motorcycle

Safety bar prevents accidental falling, Adjustable foot for

stability, Removable rear loading ramp.





Equipped with preset and manual inflation * Two outlets for

nitrogen, this product can inflate two tyres at the same time. *

It is also equipped with an air outlet to fill air. * Equipped with

four foot casters * Generates * Nitrogen from your compressed

air *2 Pre-Filters / LED display * 55L internal Nitrogen Storage

Tank. * Remains at last setting * Audible and visual end of the

cycle signal indicators * Automatic vacuum supply and

nitrogen-fill. Power Requirement 100-240Vac 50/60Hz *

Operating Temperature -20º to 70ºC * Compressed Air Input

Range 6-8.5bar * Nitrogen Purity >97% * Nitrogen Output

70L/min @ 9bar/900kPa * Maximum Nitrogen Pressure in

Tank 800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar * Units

of Measurement psi, kPa, bar * Suitable for cars and light

trucks, Green

PN-8890 Nitrogen Generator Cars & Heavy

Trucks

Product Features:

Auto-start inflation * Automatic zero drift adjustment * Remains

at last setting * Audible and visual end of cycle signal indicators

* LCD display * 4 x 8m standard hoses * 4 Nitrogen outlets to fill

Nitrogen * Equipped with four foot casters * Generates Nitrogen

from your compressed air * External 120 liter nitrogen storage

tank * Power Requirement 110/240Vac / 50-60HZ * Power

Consumption 30W * Operating Temperature Range -20 C to

70C * Compressed Air Input Range 6-8.5bar / 600-850kPa *

Nitrogen Purity > 97% * Nitrogen Output 167L/min @ 9bar /

900kPa * Maximum Nitrogen Pressure 8bar / 800kPa * Nitrogen

storage Tank * External 120 liters Suitable for Cars, Light

Trucks – Colour - Green

PN-8850 Nitrogen Generator Cars & Light Trucks

Page 10

Auto-start inflation * Automatic zero drift adjustment *

Remains at last setting* Audible and visual end of the cycle

signal indicators * LCD display * 2 x 8m/26ft standard

hoses * 4 air outlets allow simultaneous inflation of up to 4

tires* Automatic Nitrogen Purge and Fill * 55L internal *

Nitrogen Storage Tank. cycle(N2P) * Power Requirement

100-240Vac 50/60Hz * Operating Temperature -20º to 70ºC

* Compressed Air Input Range 6-8.5bar * Nitrogen Purity

95-99.99% * Nitrogen Output 70L/min (2.5cfm) @

9bar/900kPa * Maximum Nitrogen Pressure in Tank

800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar

Units of Measurement psi, kPa, bar – Green colour

PN-8830 Nitrogen Generator

NPA - Nitrogen Purity

Analyser

Product Features:

It is equipped with an air outlet to fill air. It is equipped

with a Nitrogen outlet to fill Nitrogen * Equipped with

four foot casters * Generates Nitrogen from your

compressed air * 2 Pre-Filters * External 120 liter

nitrogen storage tank * 10m standard hose supplied *

Power Requirement 110/240Vac / 50-60HZ * Power

Consumption 25W * Operating Temperature Range -

20℃C to 70℃C * Compressed Air Input Range * 6-8.5bar

/ 600-850kPa * Nitrogen Purity > 97% * Nitrogen Output

236L/min @ 9bar/900kPa * Maximum Nitrogen Pressure

10bar / 1000kPa * Nitrogen storage Tank External 120

liters * Suitable for Cars, Light Trucks, Heavy Trucks,

Colour Green

PN-8820 Nitrogen Generator





Y444100 / SD0201 Porta Power 10 ton Capacity

Extension tubes snap together in seconds and fit

perfectly without any tolerance. Chrome main

rams guarantee optimum lifetime. Includes

popular hydraulic ram spreader. Repairs dents

and creases in tight places. Attachments push,

pull and lift.

IM- SD0204 Porta Power 20 ton

Capacity: 20 Ton

Min. HT: 282mm

Stroke: 128mm

N.W.(1#): 31.0kgs

G.W.(1#): 32.0kgs

Packing Size: 81x30x20.5cm

N.W.(2#):36.0kg

G.W.(2#):37.0kg

Packing size:81.5x40x11cm

Capacity: 10T

Min. HT: 322mm

Stroke: 130mm

N.W.: 31.5kgs

G.W.: 32.0kgs

Packing Size: 71.5x31x16cm

Winntec Y461501 – Press, Hydraulic

15 ton Capacity

WY461501 -15 ton capacity. This press comes

standard with a two speed pump, arbor and

pressure gauge. Welded ready to use model.

Nine different height positions for securing the

table. Chrome main ram and pump pistons.

Frame height 1730mm, Frame width 740mm,

Hydraulic Stroke 195mm. Weight 131kg

Ram stroke 200mm

Side Stroke 245mm

Working Range 69-1048mm

Bed Width 730mm

Air Pressure 7-8 bar

Air inlet ¼” NTP

N W 303kg

GW 345kg

Package size 98cm x 32cm x 211cm

SD0811CE-Z – Press, Pneumatic

50 ton Capacity

SD0881 – Press Electro Hydraulic

50 ton Capacity

Capacity 50 ton

Output 1.5kW

Voltage 380v

Working Range 210 - 1050mm

Bed Width 730mm

Ram stroke 200mm

N W 287 kg

NW 85kg

GW 329kg

GW 85kg


34cm x 51cm x 74cm

IM-100TP – Press Electro Hydraulic

100 ton Capacity

Capacity 100 ton

Output kW 1.5kW

Voltage 380v

Working Range 177- 1017mm

Bed Width 787mm

Ram stroke 300mm

N W 680 kg

NW 75kg

GW 735kg

GW 88kg


37cm x 53cm x 79cm

Page 11





Junior Rim Straightening Machine

The Atek Junior Rim repair machine is designed to

repair all rims between 10” and 24” with the aid of a

hydraulic piston. The unit is supplied with various

spacers, nuts and bolts to enable the user to mount

the wheel for repairs. A pointer is supplied to aid the

user in identifying dents and other imperfections on

the rims.

Rim diameter 10” – 24”

Working Pressure : 140 bar

• Net weight : 178 kg

• Hydraulic Motor : 0,55 kW / 0,75 hp

The Konig 5700 Rim repair machine is designed to repair all

rims between 10” and 24” with the aid of a hydraulic piston

and a cleaning lathe. Rims can be returned to their original

condition in minutes.

The Konig 5700 is accompanied by various spacers, nuts and

bolts to enable the user to mount any wheel for repairs. An

electro magnetic pointer is supplied to aid the user in

identifying dents and other imperfections on the rims.

Rim diameter 10” – 24”

Working Pressure : 140 bar

• Net weight : 362 kg

• Hydraulic Motor : 0,55 kW / 0,75 hp

• Working Motor : 0,75kW / 1,00 hp

• Rotating Speed 250 RPM

Konig 5700 Rim Straightner with Lathe

Polish - Cln Rim Polisher

Standard Accessories: 5 Piece polishing and

cleaning brushes

Technical Specifications:

Rim Diameter 12” - 28”

Polishing brush size Min 100 x 50 / Max 400 x 50

Rotating Speed 1400rpm

Air working Pressure 8 -10 bar

Polishing working motor 1,5 kW / 1400rpm

Rim rotating motor 0.55kW / 1400rpm

Nett Weight 115 kg

3 phase electric Motor

Pressing positions

Standard accessories

RP2012 - Rim Polisher

Optional Polisher for Atek 5700 Rim Repair Machine

IM-RPK Rim Polish Kit

Page 12





Safety lock system prevents the drawers from opening accidentally, Lateral plates with peg panel design for hanging tools and

various items, Replaceable name tag, heavy duty caster with two-way brake.

Tool Trolley / Cabinets

IM-903B180kg Overall Loading Capacity

IM-907E650kg Overall Loading Capacity,

Dimensions 1226mm x 570mm x 940mm

Weight 125kg

IM-907 600kg Overall Loading Capacity


Weight 87kg

IM-803A 450kg Overall Loading Capacity


Weight 60kg

Page 13

IM-807450kg Overall Loading Capacity


Weight 70kg





Ratchet Type Jack Stands

Model Capacity Min Height Max Height Length Width G.W N.W

Y450301 3 Ton 268 425 190 170 7.5 7

Y451600 6 Ton 394 597 270 240 15.2 13.8

Y451200 12 Ton 440 710 310 260 27.1 26

All stands have a heavy duty robot welded frame, and a multi-position ductile ratchet bar. The quick adjustment mechanism

securely locks into the right location. Includes counter-weighted pawl for safe securing.

Pin Type Type Jack Stands

Model Capacity Min Height Max Height N.W

Y452300 3 Ton 322 465 5.2

Y452600 6 Ton 404 604 11

Pin type support axle stands adjust to multiple height positions. Large support saddle with oil resistant rubber adaptor

for optimal stability and damage free contact; Designed with wide feet for high standard of safety

3 ton capacity. This jack is equipped

with the TURBO LIFTER system,

rubber saddle and handle bumper. The

professional universal joint release

valve makes it possible to lower the

jack with load very precisely and free

from any risks The pump pistons

(protected with jacket to prevent from

intrusion of dirt) are placed at a 45

degree angle so a complete pumping

stroke will always be utilized. The jack

has a chrome main ram.

Y420303 Trolley Jack, Turbo Lifter

3 ton Capacity

Model Capacity Min

Height

Max

Height

Length Width N.W

Y411350 1.35 Ton 80 380 500 240 10

Y420303 3 Ton 130 490 720 360 41

Y420200 2 Ton 140 800 1250 470 58

Y420301 3 Ton 130 600 1305 320 66

Y420500 5 Ton 150 685 1420 355 95

Y421000 10 Ton 160 685 1700 510 145

CIZ-TJ20 20 Ton 180 600 1910 340 165

Y432001 20 Ton 185 373 580 320 47

Y432030 30/15 Ton 150 300 600 305 45

Y432001 - 20 ton capacity.

This heavy duty model is

designed for servicing jobs in

the truck industry. This jack

has an extra extension screw

in addition to 3 saddles that

can be placed on top of each

other for added height.

Chrome main ram and

aluminum air motor guarantee

optimum lifetime. Air filter,

connected to hose included.

All models are equipped with

a foot pedal and

ergonomically designed

handle. These jacks have a

chrome main ram and

professional universal joint

release valve that makes it

possible to lower loads very

precisely and free of any

risks.

Long chassis Trolley Jack

Winntec Y432001 Air service Jack

Winntec Y432030 Telescopic Air Service Jaack

The perfect All-Rounder. This 30/15T jack takes

Winntec air-hydraulic technology to its very

extreme. Its first stage lifts 30T and reaches

220mm. The second stage, with 15T capacity,

reaches another 80mm resulting in a 300mm

maximum height without extensions. With a150mm

low profile this jack is ideal for modern low ground-

clearance vehicles. The jack comes with 3

extensions (10-70-120mm) and has a manual valve

that can close the oil channel (during transport).

Y411350 Trolley Jack, Aluminum

1.35 ton Capacity

1350 kg. This ultra light jack is

equipped with rubber saddle and

nylon wheels. The professional

universal joint makes it possible to

lower the jack with load very

precisely and free of any risk. The

pump piston is placed at a 45˚

angle so a complete pumping

stroke will always be utilized

Page 14





Set consists of:

1 x Demounting Tool, 1 x Mounting Tool, 1 x Bead Keeper

Mount and de-mount all tubeless tires 17.5'' to 24.5''.

Demount tyre in 8 seconds, Re-mount in 20 seconds

without strain - Two simple tools do it all. Works on all

standard tubeless and super single duplex tyres. The

Changing Tools do not damage beads. Mounts and

demount tyres without the need to lift the tyre. The bead

keeper prevent the bead from skipping when mounting

the top bead. Metal construction coated with PVC will not

scratch aluminium wheels

IM- Tubeless Tyre Changing Tool Set

Demounting Tool

Mounting ToolBead Keeper

Technical Data

Motorcycle tire size 5”‐22”

Car tire size 9”‐20”

Weight 34.5KG

SD18 Tyre Changer - Manual

Max Wheel Diameter 960mm

Rim Width 3” – 10”

Outside Clamping 6” – 24”

Rotation Speed 7 rpm

Power 0.75 -1.1kw

Machine weight 175 kg

Specially designed tyre changer for two and four wheel

motorcycle tyres. Special Tool head designed specifically

for easy mounting & dismounting of motorcycle tyres of all

sizes. The shape of the bead breaker blade will easily

break the bead of small , narrow and standard motorcycle

tyres. The sliding clamping jaws have three positions that

will cover from 6” to 24” rims.

M806 Motorcycle Tyre Changer


Rim Width 4” - 12”

Inside Clamping 12” - 24”

Outside Clamping 10” - 20”

Power 0.75 -1.1kw

Rotation Speed 7 rpm


Semi automatic tyre changer with swing arm.

High quality mount/demount foot . Mag protectors

for foot and claws. Water trap & oiler. Stainless

steal bead breaking cylinder.

Optional Motor cycle / ATV adaptor available.

LC810G Semi Automatic Tyre Changer

Page 15





LC885A Automatic Tyre Changer



Power 0.75 -1.1kw

Speed 7 rpm

Inside Clamping 12” -24”



AL320B Help Arm

Automatic tyre changer with rear tilting arm.

Pneumatic column lock. Mag protectors for foot

and claws. Water trap and oiler. Stainless steal

bead breaking cylinder. Turn tables equipped with

a protective cover.

Optional: Help arm for low profile tyres

887 Automatic Tyre Changer



Inside Clamping 13” -26”


Power 0.75-1.1kw


Speed Rotation 7 rpm

Automatic tyre changer with rear tilting arm. Pneumatic

column lock. Mag protectors for foot and claws. Water trap

and oiler. Stainless steal bead breaking cylinder. Turn tables

equipped with a protective cover. 80MM Turn tables cylinder

increases clamp force. The design of the bead breaking blade

rotates enabling best bead breaking force.

Optional: Help arm for low profile tyres

AL320B Help Arm

Bright 890PSemi Auto Tyre Changer with Help Arm

Max Wheel Diameter 1250mm – 49”

Max Wheel Width 400mm – 16”

Outside Rim Dia 10-20”

Inside Rim Dia 12-23”

Machine Height (excluding arm) 2040mm

Machine length 1135mm (excluding arm) 1135mm

Machine width (excluding arm) 870mm

Nett Weight (excluding arm) 233kg

Operating Pressure 8-10bar

Motor 1.1kw / 0.75kw

Power 220v / 380v

Turn Table Speed 6rpm

Noise < 70dB

LC887ITS Automatic Lever-less Tyre Changer

Technical parameter：Max. wheel diameter ：1040mm

Tire width ：3”-15”

Rim diameter ：10”-24”/13”-26”

Work air pressure ： 8-10bar

Turntable speed ： 7-14rpm

Voltage ：110V-220V-380V

Power ：0.75/1.1Kw

22 inch arc turntable adjustable can

handle tire with the rim diameter of 10-

26inch.

Standard accessories：1-turntable protect plate：protect rim to

avoid the rim being scratched by the

turntable. There is scale on the guard

plate for the convenience to fix the tire；2-Clamping jaw protect cover：Inward

clamping protect the Alu alloy rim to

prevent the rim damageLC588 Truck Tyre Changer

LC590 Truck and OTR Tyre Changer


Wheel Width 1100mm

Internal Clamping 14” -56”

Working Pressure 150 bar



Wheel Width 1000mm

Power Requirements 1.8kw

Internal Clamping 14” -26”



Page 16





IM-QD52 Pneumatic

Tyre Spreader IM- SD-2 Manual Tyre Spreader

Pneumatic upright tyre spreader for cars, light trucks

and minibuses tyres. It is designed for locking and

subsequent spreading of tyres. The machine allows

performing such functions as inspection, sanding,

polishing, dust extraction and patching. The machine

is operated by way of two rubber coated foot

pedals.(Air required). Tyre width: 100-375mm

DB-88 Overturn Vulcanizing Machine

IM- AAT400 Tyre Caddy

Stack Height 1500mm

Weight 17kg


Due to its jaws and easy manoeuvrability,

it allows a pile of tyres to be loaded without

having to touch them by hand

IM-PW150 High Pressure Cleaner

The pressure washer is supplied with five spray nozzles.

Each nozzle is colour coded and delivers a specific

spray pattern. The 0o, 15

o, 25

oand 40

o nozzles are high

pressure nozzles and the chemical nozzle is a low

pressure nozzle.

Power 3Kw

Voltage 380v

R.P.M. 1450 r/min

Flow rate: 9.2 L/min

Max Pressure: 150bar

Suction Lift : 3m

Spray Range:10m

Weight: 45kg

Packing Dimensions: 690 x

400 x 500mm

IM-FY200 (FYMIG5320) Multi

function Mig /Mag Welder

DB-88 Features

It can vulcanize any part of model 750-16 to

model 1000-20 tires in single surface or double

surfaces. It can maintain constant temperature

automatically to ensure the temperature

required during tire vulcanization. It can raise,

lower or overturn the operating bracket to

vulcanize according to the repair position of the

tires of different models. It is equipped with five

moulds in different angle and a purpose made

heat conduct sand bag, which can ensure the

repaired tire more conforms to the normal

condition

Features

The hook can be adjusted according to the

tyre width for medium-sized and small

tyres.

The operating platform can be turned to

any place with ideal light during tyre

repairing.

Page 17

Input voltage: 380v or 220v. Rated input power: 11kva, input

current 17 A (35a/15.7v – 320A/33v, Duty Cycle: 250A/100% -

320A/65%) Frequency 60-1200kHz, Steel wire diameter 0.6-

1.2mm, Alu alloy wire diameter 0.8-1.2mm, Copper alloy wire

diameter, 0.6-1.6mm, Wire feeder, Two way dual drive





IM-XTB1200 HAND SPIN TRUCK WHEEL BALANCER

Mobile – move balancer to the wheel

Adjust height by

rotating the large

wheel

Low revolution

calculation by rotating

the wheel manually

Standard Accessories

IM-XTB820 HAND SPIN CAR WHEEL BALANCER

Hand Brake

Standard Accessories

SD-12B Static Wheel Balancer

CB6 Smart Robot Series Wheel Balancer

Easy operation, wide balancing range. Intelligent and environment protection

Specifications：Max Wheel Diameter： 1118mm

Wheel Width： 1.5--20”

Internal Clamp： 8---28”

Rotation Speed： 140rpm

Working Pressure：100---230V 1ph

Power： 90w

Duration of balancing: 7s

Accuracy： 1g

Load Capacity： 75KG

CB66 base model CB67 semi smart CB68 full smart

Page 18






Wheel Width 20”

Max Wheel Weight 65kg

Accuracy 1g

Rotation Speed 200rpm

Motor 0.25kW

Power Requirements 220v/1ph


Manual data input

CB958B Wheel Balancer

3D Automatic measurement * Multi-

balancing modes * Automatic Wheel

Brake * Up to 4 user modes * Alu Split

weight program * Foldable Display Unit

* Statistical Analysis * Facility to attach

a mini printer

Optional: Wheel Lift


Wheel Width 20”


Accuracy 1g






Wheel Width 20”


Accuracy 1g




2D Automatic measurement * Multi-balancing modes

* Wheel Brake * Up to 4 user modes * Alu Split weight

program * Foldable Display Unit



Wheel Width 20”


Accuracy 1g


Power 0.25kw


3D Automatic measurement * Multi-balancing

modes * Foot Brake Brake * Up to 4 user

modes * Alu Split weight program * LCD

Display * Statistical Analysis * Lazer Scale

CB460B Truck / Car Wheel Balancer


Wheel Width 20”


Accuracy 1g

Rotation Speed 100/200rpm

Power 0.55kw


Equipped with a Wheel Lift

CB910GB Wheel Balancer

Page 19





The tester mainly test low-frequency mechanical

vibration, which make use of ultrasonic telemeter

principle to detect the movement through a

calculated analysis to make the wave re-appear and

evaluate its relevant performance. Test Cycle 3

seconds per wheel. Oscillation displayed as a wave.

Detect distance 0.25m – 1.5 meter. Measurement

distinguishing rate 0.3mm . Results printed on

Thermal printer. Charger: 12v/1A +/-10% output.

Charging time: 5-6 hours

Main Unit dimensions: 161 x 88 x 48.5 mm

Weight: 340g

Power Supply: 8.4 V Battery

Power Consumption: 35mA

(without printing)

Hours of operation: 48 hours

(without printing)

Page 20

Lawrence 3D wheel alignment machine

• 3D max dynamic display system

• No electronic components

• Four – point wheel clamps

• High- speed 3D animation techniques

• Reminding window

• Pre-tightening rotatable jaw

• Pushing the vehicle once

• 3D Animated adjustment guidance

• Animated operation reminding

• Original standard database

• Camera showing vehicle on platform

• Intelligent voice reminding

• Camera and kingpin inclination measurement

•Vehicle body dimension measurement

•Toe out on turn measurement

•Maximum steering measurement

•Tyre diameter measurement

i5

Exquisite movable small cabinet, Height adjustable ruggedized pole, Height Performance computer, 22” LCD monitor, Special

target disk, Deluxe clamping wheel clamps, High definition camera, Steering wheel lock, Brake lock, Wedge shaped pads, turn

tables, Filler plates for turn tables, Printer and Speaker

Priman Preset Tyre Inflators

Power Consumption 20W,

Operating Temperature, Range: -20º

C to 70º C, Max Inlet Air/Nitrogen

Supply : 15bar/1500kPa, Operating

Range : 0.3-12bar/35-1200kPa,

Accuracy : ± 0.07bar/7kPa,

Resolution: 0.1bar/5kPa, Units of

Measurement , PSI/bar/kPa

Dimensions(L*W*H) 360 x 360

x1260mm, Packing Size(L*W*H)

1290 x 200mm, Net Weight 17.5kg

Gross Weight 21kg.

Power Requirement 110/240Vac / 50-60Hz,

Power Consumption 10VA, Operating

Temperature Range -20º to 70º C, Max

Inlet Air Supply 116PSI/8bar/800kPa

Operating Range 5-102PSI/0.3-7bar/35-

700kPa, Over Pressure Setting Range 0-

2bar/0-200kPa, Accuracy ± 0.07bar/7kPa,

Resolution 1PSI/0.1bar/5kPa, Units of

Measurement PSI/bar/kPa, Dimensions (L

*W*H) 230 x 120 x 290mm , Packing

Size(L*W* H) 500 x 290 x 170mm , Net

Weight 4kg, Gross Weight 6.5kg

Feature:

Adjustable Over Pressure Setting (OPS),

Auto-start inflation, Automatic zero drift

adjustment., Remain at last setting,

Comprehensive diagnostics and error

reporting, Audible and visual end of the

cycle signal indicators. Large backlight

LCD display 1 x 10m/32.8ft standard

hose with single clip-on open type chuck,

PA105PA101

BRIGHT SAT – Shock Absorber Tester

PA105 Feature:

Auto-start inflation, Automatic zero

drift adjustment. Remain at last

setting, Comprehensive

diagnostics and error reporting,

Audible and visual end of the cycle

signal indicators. Large backlight

LCD display, 1 x10m/32.8ft

standard hose with single clip-on open type chuck

Same as PA101 but can inflate 4 tyres at a time

PA108

http://site.integratedmarketing.co.za/zell/





http://www.integratedmarketing.co.za/site/wp-content/uploads/2012/09/LawrenceLogo.png





IM- One side lifter

One column electric lift - Screw elevation

system with no fixed position, Mobile -

Easy to use - Under wheel support -

Under car base (sill) with 2 fixing

systems, 220v, Suitable for lifting cars up

to 2500kg, Lifting time for maximum

range: 35 seconds

Maximum height of lifting 1000mm

Wheel dolly – roll, lift, twist, lower. Easy installation and de-installation of truck wheel assemblies.1 man control, Heavy-duty industrial bearings. 3

positions for rollers depending on size of wheel. Great tool for every service truck. Avoid damage to wheel bolts and expensive modern rims. For

all wheels from 6,5 – 22,5

Truck wheel dolly – Heavy Duty

Y-H5201-1 Wheel Dolly Set with storage trolley

4 x Wheel dolly’s with storage trolley

IM-HM5401 Hydraulic Ram Kit

2 Ton Ram

Stroke:76mm

Min. HT:139mm

10 Ton Ram

Stroke:60mm

Min. HT:118mm

10 Ton Ram

Stroke:76mm

Min. HT:139mm

10T (long)

Stroke:150mm

Min.HT:350mm

4T(long)

Stroke:132mm

Min. HT:276mm

2T(pull back ram)

Stroke:128mm

Min.HT:409mm

5T (pull back ram)

Stroke:130mm

Min.HT:483mm

Page 21

Truck wheel dolly - 500kg

http://www.handijack.cn/en/uploadfile/product/b/1/64_1307775602.jpg





AA4C Air Compressors

Page 22

Type: AA-SCP1.1/8

Motor 7.5kW/10HP

Voltage 380v/50Hz/3PH

Capacity(m3/min) 1.1


Weight 240 Kg


Type: AA-10A

Motor 1kW

Voltage 2200v/50Hz/1PH



Weight 40 Kg


Type: 0.6/8

Motor 1kW



Height 1905mm

Type: QPS015 (3 Pcs)



Weight 1.2kg

Height 267.5mm

Screw Compressor

Air Dryer

Tank

Main Filter





catalogue 2013 - integrated · pdf filecatalogue 2013. index air con service equipment.....1...

Documents