catalogue - big stocklist for tricone bits and drilling ... · pdf filefactures over 350...
TRANSCRIPT
CATALOGUEProducts for oil&gas industry
CAT
ALO
GU
E
Pro
duc
ts f
or
oil&
gas
ind
ustr
y
Products for oil&gas industryCATALOGUE
Com
pan
y
www.vbm.ru
Products for oil&gas industryCATALOGUE
Contents
2 Company
8 Innovations
14 Quality Management System
20 Drill bit technology and lease
26 Roller cone drill bits
28 Designation
29 Design features
32 Roller cone drill bits product lines
32 Slimhole
34 SlimholePro
37 Grand
38 GrandPro
40 Motor
44 MotorPro
46 Storm
47 Standart
48 Single
50 Technical information
52 PDC drill bits
54 Designation
55 Design features
57 PDC bits product lines
57 FastDrill
60 smartFastDrill
61 FastDrillMatrix
62 BicentricDrill
63 SideTrack
63 WiperTrip
64 PDC core bits
64 CoreBits
65 Technical information
66 BHA constituent elements
68 Hole-openers
68 Rock bit hole-openers
69 Bladed hole-openers
69 String stabilizers
70 Near-bit stabilizers
71 Subs
72 Contacts
www.vbm.ru
www.vbm.ru
Com
pan
y
Com
pan
y
Volgaburmash. XXI century tools.
Company
Com
pan
y
www.vbm.ru6 www.vbm.ru 7
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Company
Our state of the art equipment enables us to master new bit designs in the shortest time and provides products quality conformance with the international standards. All Volgaburmash, JSC products undergo quality control at each manufacturing stage. Since 1997, the Company has established certified Quality Management System that meets ISO standards and API Q1 specification.
The Company carries out continuous technical modernization of production. Currently, Volgabur-mash, JSC is equipped with the most advanced multi-axis machining centers, furnaces, heat-treatment machines, welding and hardfacing units purchased from the world’s leading producers.
Volgaburmash, JSC was founded in 1948 and is currently the largest and the most advanced Russian rock cutting tools producing company.
The Company manufactures over 1000 rock bit designs for oil and gas industry ranging from 3 3/4” to 26” in diameter with milled teeth and tungsten carbide inserts; over 80 standard sizes of mining rock bits ranging from 5 1/8” to 15 1/2” in diameter for compressed-air drill ing in various mining and geological conditions. Also, Volgaburmash manu-factures over 350 designs of PDC bits with matrix or steel bodies for various drill ing applications ranging from 3 1/4” to 17 1/2” in diameter, PDC core bits for core drill ing, stabilizers, string stabilizers and near-bit stabilizers.
оver 1.5thousand drillbit designs
www.vbm.ru8 www.vbm.ru 9
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Volgaburmash, JSC has also imple-mented Environment Management System and Health and Safety Management System according to ISO 14001:2004 and OHSAS 18001:2007 requirements.
Since the Company was founded, Vol-gaburmash, JSC specialists have developed over 1600 drill bit designs. Many of these design solutions are of international novelty. Their authors and the Company have obtained more than 300 inventor’s certificates and patents for inventions in Russia and 17 other countries. Over fifteen hundred in-novations have been put into production.
Our background of experience, high scientific engineering potential and the team of professionals give Volgaburmash, JSC an excellent op-portunity of creating an individual approach to each customer and de-veloping unique drill bit designs for any drilling applications in the shortest time possible.
Since its foundation, the Company has produced more than 8.5 mill ion dril l bits for oil and gas and mining indus-tries. The quality of the products and the sales volume make Volgaburmash, JSC one of the world’s leading rock-cutting tools manufacturers. Rock-cutting tools produced by Vol-gaburmash, JSC are used in the main Russian f ields and in more than 40 other countries.
the Companyhas manufacturedover 8.5 million drill bits
Company
Com
pan
y
Com
pan
y
Volgaburmash. XXI century practices.
Innovations
www.vbm.ru12 www.vbm.ru 13
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Having its proprietary patented technical research and software developments enables Volgaburmash, JSC to manufacture highly competitive drill bits modified for customer specific applications.
Design engineers have at their disposal a software for automated drawing of a bit profile and bottom-hole coverage pattern, dull bit grading, selection of optimal hydraulics, load balanc-ing for improving bit steerability, as well as field test performance analysis by means of advanced statistical data processing methods.
The base of the Company development is working out and introducing innovation technologies in all aspects of its activities providing high product quality level: in design engineering, manufacturing technology and after-sales service.
Volgaburmash, JSC has worked out a successful thorough system of automated design engineering, technology process plan-ning and engineering evaluation (CAD/CAM/CAE-system) based on the unified environment of Siemens UG NX software system that is widely used by the world’s leading companies.
Design engineering system incorporates patented research results, math model simula-tion, selecting the optimal drill bit design param-eters and multi-factor analysis of bit test results.
Innovations
introducinginnovationtechnologiesin all aspects of business
www.vbm.ru14 www.vbm.ru 15
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Manufacturing technology upgrading includes the selection of the optimal manufacturing equipment, improvement of technical processes, production modes as well as choosing new materials with improved characteristics.
Design engineer ing and products manufacturing are fulfilled according to an individual arrangement for a particular cus-tomer, taking into account customer equip-ment and field lithology. Currently, Volga-burmash, JSC specialists can design and manufacture drilling tools of any complexity and modify bit design depending on the drilling application.
All Volgaburmash, JSC innovations are targeted at fulfillment of Quality Policy, which means maximum satisfaction of customer’s requirements and expectations and creat-ing their conf idence in the Company’s product.
The Company monitors its products quality at all stages of their l i fe cycle to support operational decision making re-lated to improvement of design parameters and manufacturing technology.
A team of highly ski l led special ists works out and implements innovations in cooperation with scientif ic and research organizations.
from scientific researchresults to the math model, manufacturing and improvement
Innovations
Com
pan
y
Com
pan
y
Quality Management System
Volgaburmash. XXI century quality.
www.vbm.ru18 www.vbm.ru 19
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Quality Management System
A special place in the Quality Management System is traditionally and justly held by product quality control. Highly qualified personnel of Manufacturing Engineering Support and Technical Control departments, a number of high technology laboratories and services ensure undeviating filling product requirements that have been set before Volgaburmash, JSC for many decades.
The main strategic aim of Volgaburmash, JSC — the quality — regulates all Company’s pro-cesses — management, production and marketing processes — starting with development of new bit designs to satisfy customer requirements and finishing with the delivery of the finished products to the consumer.
Volgaburmash, JSC has implemented, certified and maintains Quality Management System (QMS), that meets the requirements of the International Standards ISO 9001 and ANSI/API Spec.Q1.
Also, the Company has implemented ISO 14001 Standard (Environment Manage-ment System) and British National Standard BS-OHSAS 18001 (Health and Safety Man-agement System).
quality regulatesall Company’s processes
www.vbm.ru20 www.vbm.ru 21
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
The Central Laboratory and Metrology Service of Volgaburmash, JSC are accredited and certified by the Federal Agency for Techni-cal Regulation and Metrology (ROSSTANDART) which is an official confirmation of the Com-pany’s conformity to technical regulations and compulsory standard requirements.
from structural study tomodification of technology
Advanced and constantly brought up to date equipment of the Company’s laboratories and services guarantees quality control and assessment level meeting the International Standards as far as design solutions, materials, component parts and manufacturing processes.
From chemical analysis of highly complex materials, structural study, identification of grade, grain size, plating thickness — to opera-tional control in express laboratories and modification of techno logy processes of powder metallurgy, industrial rubber articles, chemical and heat treatment of bit component parts — this is by no means the complete list of methods and processes that are successfully carried out for the purposes of product quality control.
Quality Management System
Com
pan
y
Com
pan
y
Drill Bits Technology and Lease
Volgaburmash. XXI century service.
www.vbm.ru24 www.vbm.ru 25
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Volgaburmash, JSC renders engineering services for well construction, for this purpose the Company established its own Drill Bit Services Department. It ensures the customers get maximum bit performance by means of proper bit selection and constant control of drilling parameters. Moreover, a direct “manufacturer — customer” relationship allows Volgaburmash to respond promptly and modify drill bits for a given application.
Main advantages of Volgaburmash drill bit service:
•Highly qualified and experienced service personnel, comprehensive information on new bit designs and bit features, bit wear and bit performance help lower the risks and achieve maximum performance;•Payment is made on the basis of actual meters drilled. It allows the Customer
to accurately plan well construction expenses and to minimize financial risks;•Storage and transportation costs are eliminated;•Number of drilling personnel and technological service experts is lowered.
Drill Bits Technology and Lease
drilling efficiency, drillbit technology, drill bit upgrading
www.vbm.ru26 www.vbm.ru 27
Com
pan
y
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUEC
omp
any
Volgaburmash, JSC Service Dept. also
renders bit lease services. Unlike after-sales
service, bit lease does not involve Volgaburmash,
JSC engineers in the drilling process which ad-
ditionally saves money and makes it possible to
estimate the expenses connected with rock
cutting tools in advance.
Specialists of oil&gas and service companies
upgrade their qualification in Volgaburmash, JSC’
Training Center. During practical and consulting
seminars the specialists study peculiarities of
conventional and new bit designs, get hand-on
experience of selecting optimal drilling parameters
as well as dull bit evaluation skills. Personnel
training will help companies incorporate more
efficiency in their drilling operations and reduce
costs associated with improper selection and
use of drill bits.
Drill Bits Technology and Lease
Com
pan
y
Com
pan
y
Volgaburmash. XXI century tool.
Roller Cone Drill Bits
Rol
ler
Con
e D
rill B
its
30 31
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
Rol
ler
Con
e D
rill B
its
Rol
ler
Con
e D
rill B
its
www.vbm.ru www.vbm.ru
Product line
Roller Cone Bits Designation Roller Cone Bits Design Features
Central mud circulation
Shirttail and leg leading edge hardfacing
Enhanced shirttail hardfacing
Leg protection with TCI cutters
Leg protection with TCI cutters, shirttail
protection with diamond cutters
Combined mud circulation Extended nozzles
Mud blade Stabilization pad with TCI cutters
Stabilization pad with diamond cutters
Diameter, in IADC code Design
8 1/2
32 33
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Rol
ler
Con
e D
rill B
its
Single gauge of diamond compacts
Near gauge row (reamers)
Enhanced heel row
Enhanced heel row with diamond compacts
Energy balanced cutting structure
Double gauge of diamond compacts
Diamond compacts in the near gauge row
Chisel inserts
Enhanced steel teeth hardfacing
Single gauge of tungsten carbide
compacts
Double gauge of tungsten carbide
compacts
Conical inserts
Other shape inserts
Roller Cone Bits Design Features
34 35
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Slimhole
Cutting structureThis product line may have either milled teeth or TCI. To increase bit life, steel teeth are hardfaced with wear-resistant tungsten carbide based material. Depending on the rock hard-ness, either side surfaces or side and end surfaces of steel teeth are hardfaced.
The gauge may be protected with tungsten carbide inserts. For additional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
Lubrication systemBit lubrication system is designed to com-
pensate grease consumption and pressure during long-term operation. It consists of a grease reservoir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the grease reservoir with friction areas in bearings.
Shirttail and leg protection
Shirttail or shirttail and leg lead-ing edge are hardfaced and may have tungsten carbide inserts.
Drill bits with sealed bearing for drilling small diameter wells (less than 6 3/4”). Slimhole bits are ideal to drill for liner.In Slimhole bits, both friction and roller bear-ings can be used. In friction bearings, antifric-tion wear-resistant materials and silver coating are used.
TCI bit4 1/4 SLH517 (R542)
Steel teeth bit 4 1/8 SLH215 (R870)
Shirttail and leg leading edge hardfacing
Leg protection with tungsten carbide inserts
Slimhole Product LineBit diameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
95,3 3 3/4SLH117 (R967) 117 pin З-66 2 3/8 Reg 5,5
SLH637 (R906) 637Y pin З-66 2 3/8 Reg 4,0
104,8 4 1/8
SLH117 (R966) 117 pin З-66 2 3/8 Reg 6,0
SLH135 (R757) 135 pin З-66 2 3/8 Reg 6,0
SLH137 (R978) 137 pin З-66 2 3/8 Reg 6,0
SLH214 (R871) 214 pin З-66 2 3/8 Reg 6,0
SLH215 (R870) 215 pin З-66 2 3/8 Reg 6,0
SLH517 (R541) 517X pin З-66 2 3/8 Reg 5,0
SLH537 (R944) 537X pin З-66 2 3/8 Reg 6,0
108,0 4 1/4 SLH517 (R542) 517X pin З-66 2 3/8 Reg 6,0
117,5 4 5/8 SLH214 (R2068) 214 pin З-76 2 7/8 Reg 9,0
139,7 5 1/2 SLH547 (R2042) 547X pin З-76 2 7/8 Reg 13,5
149,2 5 7/8SLH134 (R975) 134 pin З-88 3 1/2 Reg 15,0
SLH214 (R764) 214 pin З-88 3 1/2 Reg 15,0
152,4 6 SLH215 (R850) 215 pin З-88 3 1/2 Reg 16,0
155,6 6 1/8SLH135 (R753) 135 pin З-88 3 1/2 Reg 17.0
SLH215 (R861) 215 pin З-88 3 1/2 Reg 15,6
158,7 6 1/4
SLH127 (R186) 127 pin З-88 3 1/2 Reg 16,0
SLH517 (R145) 517X pin З-88 3 1/2 Reg 17,0
SLH537 (R147) 537X pin З-88 3 1/2 Reg 17,0
161,0 6 11/32SLH126 (R98) 126 pin З-88 3 1/2 Reg 17,0
SLH517 (R94) 517X pin З-88 3 1/2 Reg 18,0
165,1 6 1/2SLH537 (R144) 537X pin З-88 3 1/2 Reg 19,0
SLH817 (R148) 817Y pin З-88 3 1/2 Reg 20,0
171,4 6 3/4SLH517 (R151) 517X pin З-88 3 1/2 Reg 22,0
SLH537 (R152) 537X pin З-88 3 1/2 Reg 22,0
Roller Cone Bits Product Lines
36 37
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
SlimholePro
Cutting structureThis product line may have either milled
teeth or TCI. Cutting structure designed with advanced software systems provides effective drilling of any rock type and prolongs bit life. To increase steel teeth life, a patented mate-rial is used that consists of a mixture of spherical cast tungsten carbide and small hard-alloy grains. Depending on the rock hard-ness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be protected with tungsten carbide inserts. For additional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
The gauge and the near gauge rows may include diamond-coated tungsten carbide in-serts. Depending on the application, these inserts may come up to 30%, 50% or 100% of the total amount of inserts.
Lubrication systemBit lubrication system is designed to com-
pensate grease consumption and pressure
during long-term operation. It consists of a grease reservoir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the grease reservoir with friction areas in bearings.
Shirttail and leg protectionSlimholePro bits have improved protection against gauge loss. Gauge
rows have maximum number of tungsten carbide inserts. Legs have ad-ditional stabilization pads.
Small diameter bits (less than 6 3/4”) with pre-mium sealed bearing. Designing the bits of this product line involves advanced knowledge-inten-sive technologies and engineering analysis in the state of the art software systems. High bit perfor-mance is achieved due to high-quality materials, using improved reliability bearings, most recent bit body protection systems and optimum cutting structure layout. This bit type is ideal for horizon-tal drilling. SlimholePro bits use friction bearings with constituent parts made of antifriction wear-resistant material with silver coating as well as elastomer coating to improve wear characteristics.
TCI bit6 1/2 SLHP547 (R496)
Steel teeth bit6 1/2 SLHP127 (R550)
SlimholePro Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
114,3 4 1/2 SLHP136 (R2001) 136 pin З-66 2 3/8 Reg 7,0
120,6 4 3/4
SLHP117 (R557) 117 pin З-76 2 7/8 Reg 7,6SLHP437 (R885) 437Х pin З-76 2 7/8 Reg 7,8SLHP517 (R218) 517X pin З-76 2 7/8 Reg 8,0SLHP547 (R928) 547X pin З-76 2 7/8 Reg 9,5
124,0 4 7/8
SLHP117 (R891) 117 pin З-76 2 7/8 Reg 10,5SLHP517 (R959) 517Х pin З-76 2 7/8 Reg 11,2SLHP547 (R881) 547Х pin З-76 2 7/8 Reg 11,2SLHP627 (R960) 627Y pin З-76 2 7/8 Reg 9,4
126,0 4 31/32 SLHP117 (R965) 117 pin З-76 2 7/8 Reg 10,8127,0 5 SLHP527 (R809) 527Х pin З-76 2 7/8 Reg 11,2130,2 5 1/8 SLHP117 (R943) 117 pin З-88 3 1/2 Reg 8,5
139,7 5 1/2
SLHP216 (R223) 216 pin З-88 3 1/2 Reg 13,5SLHP447 (R507) 447X pin З-88 3 1/2 Reg 13,5SLHP547 (R923) 547X pin З-88 3 1/2 Reg 13,5SLHP637 (R876) 637Y pin З-88 3 1/2 Reg 13,5
142,9 5 5/8
SLHP117 (R558) 117 pin З-88 3 1/2 Reg 14,0SLHP437 (R409) 437X pin З-88 3 1/2 Reg 14,0SLHP517 (R538) 517X pin З-88 3 1/2 Reg 14,0SLHP547 (R579) 547X pin З-76 2 7/8 Reg 13,2SLHP547 (R961) 547X pin З-88 3 1/2 Reg 13,0SLHP627 (R922) 627X pin З-88 3 1/2 Reg 14,0
143,9 5 2/3SLHP547 (R882) 547Х pin З-88 3 1/2 Reg 13,7SLHP627 (R893) 627Х pin З-88 3 1/2 Reg 14,0
Roller Cone Bits Product Lines
38 39
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Grand
Steel teeth bit 19 19/64 GRD213 (R216)
Large diameter bits (over 15 1/2”) with open bear-ings are designed for drilling upper well sections (surface hole drilling). Without sealing elements in the bearing, it is possible to maximize the journal and the rollers dimensions and to achieve full circulation in the bearing which is highly important as it helps reduction of the torque, providing quick cooling action and increasing bearing life.
Cutting structureThis product line may have either milled teeth
or TCI. To increase steel teeth life, steel teeth are hardfaced with wear-resistant tungsten carbide based material. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be protected with tungsten carbide inserts. For additional protec-tion against gauge loss, a near gauge of tungsten carbide inserts may be used.
Shirttail and leg protection
Shirttail is hardfaced along its leading edge.
SlimholePro Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
146,0 5 3/4SLHP547 (R296) 547Y pin З-88 3 1/2 Reg 15,0
SLHP627 (R949) 627X pin З-88 3 1/2 Reg 13,6
149,2 5 7/8
SLHP117 (R585) 117 pin З-88 3 1/2 Reg 14,0
SLHP137 (R977) 137 pin З-88 3 1/2 Reg 15,0
SLHP217 (R474) 217 pin З-88 3 1/2 Reg 14,0
SLHP437 (R805) 437X pin З-88 3 1/2 Reg 15,0
SLHP447 (R577) 447X pin З-88 3 1/2 Reg 15,0
SLHP517 (R495) 517X pin З-88 3 1/2 Reg 15,0
SLHP527 (R955) 527X pin З-88 3 1/2 Reg 15,0
SLHP537 (R485) 537X pin З-88 3 1/2 Reg 15,0
SLHP547 (R877) 547Х pin З-88 3 1/2 Reg 15,0
SLHP617 (R497) 617Х pin З-88 3 1/2 Reg 15,0
SLHP637 (R435) 637Y pin З-88 3 1/2 Reg 14,0
151,0 5 15/16 SLHP217 (R586) 217 pin З-88 3 1/2 Reg 14,0
152,4 6
SLHP117 (R591) 117 pin З-88 3 1/2 Reg 14,0
SLHP127 (R910) 127 pin З-88 3 1/2 Reg 13,7
SLHP137 (R878) 137 pin З-88 3 1/2 Reg 13,7
SLHP217 (R570) 217 pin З-88 3 1/2 Reg 14,0
SLHP417 (R411) 417X pin З-88 3 1/2 Reg 15,0
SLHP437 (R811) 437X pin З-88 3 1/2 Reg 16,0
SLHP447 (R592) 447X pin З-88 3 1/2 Reg 15,0
SLHP517 (R934) 517X pin З-88 3 1/2 Reg 16,0
SLHP537 (R948) 537X pin З-88 3 1/2 Reg 16,0
SLHP547 (R416) 547Y pin З-88 3 1/2 Reg 15,0
SLHP617 (R480) 617X pin З-88 3 1/2 Reg 16,0
SLHP627 (R939) 627Y pin З-88 3 1/2 Reg 16,0
SLHP637 (R481) 637Y pin З-88 3 1/2 Reg 16,0
155,6 6 1/8
SLHP117 (R887) 117 pin З-88 3 1/2 Reg 17,0
SLHP217 (R465) 217 pin З-88 3 1/2 Reg 16,0
SLHP437 (R867) 437X pin З-88 3 1/2 Reg 16,1
SLHP447 (R909) 447X pin З-88 3 1/2 Reg 17,0
SLHP517 (R450) 517X pin З-88 3 1/2 Reg 17,0
SLHP527 (R455) 527Y pin З-88 3 1/2 Reg 16,0
SLHP537 (R847) 537X pin З-88 3 1/2 Reg 17,0
SLHP547 (R892) 547X pin З-88 3 1/2 Reg 16,1
SLHP617 (R964) 617X pin З-88 3 1/2 Reg 17,0
SLHP627 (R890) 627X pin З-88 3 1/2 Reg 17,0
SLHP637 (R456) 637Y pin З-88 3 1/2 Reg 17,0
165,1 6 1/2
SLHP127 (R550) 127 pin З-88 3 1/2 Reg 20,0
SLHP217 (R994) 217 pin З-88 3 1/2 Reg 20,0
SLHP517 (R499) 517X pin З-88 3 1/2 Reg 19,0
SLHP547 (R496) 547Y pin З-88 3 1/2 Reg 23,0
SLHP637 (R500) 637Y pin З-88 3 1/2 Reg 19,0
SLHP837 (R521) 837Z pin З-88 3 1/2 Reg 23,0
171,4 6 3/4 SLHP117 (R936) 117 pin З-88 3 1/2 Reg 18,0
Grand Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
393,7 15 1/2 GRD111 (R970) 111 pin З-177 7 5/8 Reg 180,0
444,5 17 1/2
GRD211 (R971) 211 pin З-177 7 5/8 Reg 180,0GRD111 (R211) 111 pin З-177 7 5/8 Reg 235,0GRD113 (R130) 113 pin З-177 7 5/8 Reg 240,0GRD311 (R972) 311 pin З-177 7 5/8 Reg 235,0
490,0 19 19/64
GRD111 (R215) 111 pin З-177 7 5/8 Regv 300,0GRD213 (R216) 213 pin З-177 7 5/8 Reg 290,0GRD111 (R213) 111 pin З-177 7 5/8 Reg 320,0GRD111 (R633) 111 pin З-177 7 5/8 Reg 630,0
508,0 20 GRD121 (R636) 121 pin З-177 7 5/8 Reg 660,0660.4 26 GRD131 (R658) 131 pin З-177 7 5/8 Reg 660,0
Roller Cone Bits Product Lines
40 41
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
GrandProLarge diameter bits (over 15 1/2”) with premium sealed bearing designed for multiple drilling of up-per sections (surface hole drilling), they have in-creased bit life during forced drilling practices. GrandPro Line may have both friction and roller bearings. The friction bearings have constituent parts made of antifriction wear-resistant material with silver coating to increase bearing life.
TCI bit 26 GRDP515 (R560)
Steel teeth bit 17 1/2 GRDP117 (R828)
Cutting structureThis product line may have either milled teeth
or TCI. Cutting structure designed with advanced software systems provides effective drilling of any rock type and prolongs bit life. To increase steel teeth life, a patented material is used that consists of a mixture of spherical cast tungsten carbide and small hard-alloy grains. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be protected with tungsten carbide inserts. For additional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
The gauge and the near gauge rows may include diamond-coated tungsten carbide inserts. Depending on the application, these inserts may come up to 30%, 50% or 100% of the total amount of inserts.
Lubrication systemBit lubrication system is designed to compensate
grease consumption and pressure during long-term operation. It consists of a grease reservoir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the grease reservoir with friction areas in bearings.
Shirttail and leg protectionShirttail and leg leading edge are hardfaced
and may be protected with tungsten carbide or dia-mond inserts or a combination of tungsten carbide and diamond inserts. Bits may have stabilization features.
GrandPro Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
393,7 15 1/2
GRDP115 (R905) 115 pin З-177 7 5/8 Reg 170,0GRDP117 (R897) 117 pin З-177 7 5/8 Reg 170,0GRDP127 (R987) 127 pin З-177 7 5/8 Reg 172,0GRDP135 (R732) 135 pin З-177 7 5/8 Reg 180,0GRDP137 (R988) 137 pin З-177 7 5/8 Reg 180,0GRDP215 (R167) 215 pin З-177 7 5/8 Reg 187,0GRDP217 (R989) 217 pin З-177 7 5/8 Reg 180,0GRDP235 (R2000) 235 pin З-177 7 5/8 Reg 180,0GRDP545 (R174) 545X pin З-177 7 5/8 Reg 170,0GRDP625 (R326) 625X pin З-177 7 5/8 Reg 180,0
406,4 16
GRDP115 (R559) 115 pin З-177 7 5/8 Reg 200,0GRDP135 (R556) 135 pin З-177 7 5/8 Reg 190,0GRDP215 (R940) 215 pin З-177 7 5/8 Reg 200,0GRDP415 (R555) 415X pin З-177 7 5/8 Reg 200,0GRDP435 (R571) 435X pin З-177 7 5/8 Reg 200,0GRDP437 (R935) 437X pin З-177 7 5/8 Reg 200,0GRDP535 (R937) 535X pin З-177 7 5/8 Reg 200,0
431,8 17GRDP115 (R832) 115 pin З-177 7 5/8 Reg 205,0GRDP117 (R842) 117 pin З-177 7 5/8 Reg 205,0
444,5 17 1/2
GRDP115 (R477) 115 pin З-177 7 5/8 Reg 235,0GRDP117 (R828) 117 pin З-177 7 5/8 Reg 235,0GRDP127 (R911) 127 pin З-177 7 5/8 Reg 235,0GRDP135 (R418) 135 pin З-177 7 5/8 Reg 235,0GRDP137 (R543) 137 pin З-177 7 5/8 Reg 235,0GRDP215 (R566) 215 pin З-177 7 5/8 Reg 230,0GRDP217 (R990) 217 pin З-177 7 5/8 Reg 240,0GRDP415 (R421) 415Z pin З-177 7 5/8 Reg 245,0GRDP417 (R904) 417Z pin З-177 7 5/8 Reg 252,0GRDP425 (R493) 425X pin З-177 7 5/8 Reg 250,0GRDP435 (R421) 435Z pin З-177 7 5/8 Reg 245,0GRDP437 (R486) 437Z pin З-177 7 5/8 Reg 252,0GRDP445 (R863) 445Z pin З-177 7 5/8 Reg 252,0GRDP515 (R445) 515X pin З-177 7 5/8 Reg 244,0GRDP517 (R379) 517X pin З-177 7 5/8 Reg 255/0GRDP535 (R168) 535X pin З-177 7 5/8 Reg 235,0 GRDP537 (R378) 537X pin З-177 7 5/8 Reg 235,0GRDP545 (R242) 545Z pin З-177 7 5/8 Reg 270,0
469,9 18 1/2
GRDP115 (R855) 115 pin З-177 7 5/8 Reg 250,0GRDP125 (R858) 125 pin З-177 7 5/8 Reg 255,0GRDP135 (R860) 135 pin З-177 7 5/8 Reg 260,0GRDP215 (R859) 215 pin З-177 7 5/8 Reg 260,0
490,0 19 19/64GRDP115 (R682) 115 pin З-177 7 5/8 Reg 290,0GRDP545 (R698) 545Z pin З-177 7 5/8 Reg 290,0
660,4 26
GRDP115 (R552) 114 pin З-177 7 5/8 Reg 630,0GRDP135 (R653) 135 pin З-177 7 5/8 Reg 620,0GRDP215 (R650) 215 pin З-177 7 5/8 Reg 693,0GRDP515 (R560) 515X pin З-177 7 5/8 Reg 680,0
Roller Cone Bits Product Lines
42 43
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
MotorDrill bits with sealed bearing are designed for a wide range of applications and give high performance due to the use of improved reliability bearings, advanced bit body protection system and optimal cutting structure.Motor bits can have both friction and roller bearings. The friction bearings use antifriction wear-resistant material with silver coating.
TCI bit 8 1/2 MTR435 (R206)
Steel teeth bit 8 1/2 MTR215 (R501)
Cutting structureThis product line may have either milled teeth
or TCI. To increase steel teeth life, steel teeth are hardfaced with wear-resistant tungsten carbide based material. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be pro-tected with tungsten carbide inserts. For addi-tional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
Lubrication systemBit lubrication system is designed to com-
pensate grease consumption and pressure during long-term operation. It consists of a grease reser-voir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the grease reservoir with friction areas in bearings.
Shirttail and leg protectionShirttail and leg leading edge are hardfaced
and may be protected with tungsten carbide or diamond inserts or a combination of tungsten carbide and diamond inserts.
Motor Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
190,5 7 1/2
MTR117 (R837) 117 pin З-117 4 1/2 Reg 27,8
MTR127 (R65) 127 pin З-117 4 1/2 Reg 28,0
MTR137 (R506) 137 pin З-117 4 1/2 Reg 28,0
MTR214 (R55) 214 pin З-117 4 1/2 Reg 28,0
MTR217(R508) 217 pin З-117 4 1/2 Reg 27,3
MTR314 (R25) 314 pin З-117 4 1/2 Reg 26,0
MTR437 (R91) 437Х pin З-117 4 1/2 Reg 28,7
MTR517 (R494) 517X pin З-117 4 1/2 Reg 30,0
MTR537 (R24) 537X pin З-117 4 1/2 Reg 30,0
MTR547 (R553) 547X pin З-117 4 1/2 Reg 29,5
MTR625 (R29) 625X pin З-117 4 1/2 Reg 30,0
MTR627 (R60) 627X pin З-117 4 1/2 Reg 33,0
MTR757 (R33) 747Y pin З-117 4 1/2 Reg 30,0
200,0 7 7/8
MTR117 (R567) 117 pin З-117 4 1/2 Reg 28,0
MTR417 (R846) 417X pin З-117 4 1/2 Reg 33,0
MTR437 (R803) 437X pin З-117 4 1/2 Reg 33,0
MTR517 (R405) 517X pin З-117 4 1/2 Reg 31,0
MTR527 (R512) 527Y pin З-117 4 1/2 Reg 33,0
MTR537 (R532) 537Y pin З-117 4 1/2 Reg 32,0
MTR547 (R514) 547Y pin З-117 4 1/2 Reg 33,0
MTR627 (R529) 627Y pin З-117 4 1/2 Reg 33,0
MTR637 (R513) 637Y pin З-117 4 1/2 Reg 33,0
MTR817 (R149) 817Y pin З-117 4 1/2 Reg 33,0
212,7 8 3/8
MTR215 (R851) 215 pin З-117 4 1/2 Reg 33,0
MTR217 (R464) 217 pin З-117 4 1/2 Reg 33,0
MTR435 (R471) 435X pin З-117 4 1/2 Reg 35,0
MTR515 (R478) 515X pin З-117 4 1/2 Reg 35,0
MTR547 (R476) 547X pin З-117 4 1/2 Reg 36,0
215,9 8 1/2
MTR114 (R848) 114 pin З-117 4 1/2 Reg 34,0
MTR117 (R443) 117 pin З-117 4 1/2 Reg 33,0
MTR125 (R199) 125 pin З-117 4 1/2 Reg 35,0
MTR135 (R184) 135 pin З-117 4 1/2 Reg 35,0
MTR214 (R190) 214 pin З-117 4 1/2 Reg 35,0
MTR215 (R501) 215 pin З-117 4 1/2 Reg 33,3
MTR217 (R454) 217 pin З-117 4 1/2 Reg 35,0
MTR315 (R962) 315 pin З-117 4 1/2 Reg 36,0
MTR417 (R587) 417X pin З-117 4 1/2 Reg 34,9
MTR427 (R598) 427X pin З-117 4 1/2 Reg 36,0
MTR435 (R206) 435Z pin З-117 4 1/2 Reg 37,0
MTR545 (R816) 545X pin З-117 4 1/2 Reg 36,0
MTR547 (R584) 547Y pin З-117 4 1/2 Reg 37,0
MTR625 (R810) 625X pin З-117 4 1/2 Reg 36,0
Roller Cone Bits Product Lines
44 45
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Motor Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
219,1 8 5/8 MTR437 (R840) 437X pin З-117 4 1/2 Reg 37,0
220,7 8 11/16 MTR435 (R844) 435Z pin З-117 4 1/2 Reg 37,0
222,3 8 3/4
MTR117 (R219) 117 pin З-117 4 1/2 Reg 35,0
MTR215 (R821) 215 pin З-117 4 1/2 Reg 35,0
MTR417 (R872) 417X pin З-117 4 1/2 Reg 38,0
MTR435 (R516) 435Z pin З-117 4 1/2 Reg 38,0
MTR547 (R536) 547Y pin З-117 4 1/2 Reg 37,0
MTR627 (R535) 627Y pin З-117 4 1/2 Reg 38,0
241,3 9 1/2MTR117 (R2004) 117 pin З-152 6 5/8 Reg 56,0
MTR537 (R827) 537X pin З-152 6 5/8 Reg 58,0
244,5 9 5/8
MTR117 (R446) 117 pin З-152 6 5/8 Reg 55,0
MTR437 (R444) 437X pin З-152 6 5/8 Reg 56,0
MTR535 (R12) 535X pin З-152 6 5/8 Reg 58,0
MTR545 (R17) 545X pin З-152 6 5/8 Reg 58,0
250,8 9 7/8
MTR114 (R135) 114 pin З-152 6 5/8 Reg 57,0
MTR126 (R143) 126 pin З-152 6 5/8 Reg 62,0
MTR134 (R142) 134 pin З-152 6 5/8 Reg 58,0
MTR417 (R518) 417X pin З-152 6 5/8 Reg 60,5
MTR517 (R132) 517X pin З-152 6 5/8 Reg 62,0
MTR535 (R460) 535X pin З-152 6 5/8 Reg 59,2
MTR537 (R131) 537X pin З-152 6 5/8 Reg 62,0
MTR617 (R154) 617X pin З-152 6 5/8 Reg 64,0
MTR637 (R156) 637Y pin З-152 6 5/8 Reg 64,0
MTR737 (R150) 737Y pin З-152 6 5/8 Reg 64,0
269,9 10 5/8
MTR117 (R835) 117 pin З-152 6 5/8 Reg 67,0
MTR127 (R992) 127 pin З-152 6 5/8 Reg 68,0
MTR137 (R993) 137 pin З-152 6 5/8 Reg 68,0
MTR215 (R856) 215 pin З-152 6 5/8 Reg 72,0
MTR217 (R806) 217 pin З-152 6 5/8 Reg 67,5
MTR437 (R78) 437X pin З-152 6 5/8 Reg 72,0
MTR517 (R483) 517X pin З-152 6 5/8 Reg 72,0
MTR535 (R36) 535X pin З-152 6 5/8 Reg 70,0
MTR537 (R35) 537X pin З-152 6 5/8 Reg 70,0
MTR545 (R06) 545X pin З-152 6 5/8 Reg 73,0
MTR547 (R18) 547X pin З-152 6 5/8 Reg 70,0
MTR627 (R100) 627X pin З-152 6 5/8 Reg 78,0
MTR745 (R26) 745Y pin З-152 6 5/8 Reg 72,3
Motor Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
279,4 11
MTR115 (R380) 115 pin З-152 6 5/8 Reg 78,0
MTR117 (R564) 117 pin З-152 6 5/8 Reg 78,0
MTR527 (R545) 527Y pin З-152 6 5/8 Reg 79,0
MTR547 (R547) 547Y pin З-152 6 5/8 Reg 79,0
MTR837 (R581) 837Y pin З-152 6 5/8 Reg 80,0
295,3 11 5/8
MTR124 (R85) 124 pin З-152 6 5/8 Reg 92,0
MTR214 (R58) 214 pin З-152 6 5/8 Reg 80,0
MTR217 (R588) 217 pin З-152 6 5/8 Reg 79,2
MTR236 (R996) 236 pin З-152 6 5/8 Reg 85,0
MTR337 (R593) 337 pin З-152 6 5/8 Reg 84,0
MTR435 (R77) 435X pin З-152 6 5/8 Reg 92,0
MTR535 (R201) 535X pin З-152 6 5/8 Reg 86,3
MTR537 (R596) 537X pin З-152 6 5/8 Reg 88,0
MTR545 (R23) 545X pin З-152 6 5/8 Reg 85,0
MTR625 (R57) 625X pin З-152 6 5/8 Reg 90,0
MTR627 (R438) 627Y pin З-152 6 5/8 Reg 90,0
304,8 12 MTR115 (R941) 115 pin З-152 6 5/8 Reg 90,0
311,1 12 1/4
MTR115 (R193) 115 pin З-152 6 5/8 Reg 85,0
MTR125 (R853) 125 pin З-152 6 5/8 Reg 88,0
MTR135 (R339) 135 pin З-152 6 5/8 Reg 82,0
MTR137 (R540) 137 pin З-152 6 5/8 Reg 90,0
MTR215 (R338) 215 pin З-152 6 5/8 Reg 82,2
MTR217 (R505) 217 pin З-152 6 5/8 Reg 90,0
MTR415 (R467) 415X pin З-152 6 5/8 Reg 92,0
MTR417 (R599) 417X pin З-152 6 5/8 Reg 100,0
MTR427 (R826) 427X pin З-152 6 5/8 Reg 97,0
MTR435 (R461) 435X pin З-152 6 5/8 Reg 89,8
MTR445 (R463) 445X pin З-152 6 5/8 Reg 90,0
MTR515 (R2037) 515X pin З-152 6 5/8 Reg 90,0
MTR527 (R533) 527Y pin З-152 6 5/8 Reg 96,0
MTR535 (R984) 535Х pin З-152 6 5/8 Reg 97,0
MTR547 (R561) 547Y pin З-152 6 5/8 Reg 96,0
MTR617 (R562) 617X pin З-152 6 5/8 Reg 96,4
MTR837 (R299) 837Y pin З-152 6 5/8 Reg 95,7
349,2 13 3/4 MTR115 (R181) 115 pin З-152 6 5/8 Reg 111,0
368,3 14 1/2 MTR117 (R839) 117 vpin З-177 7 5/8 Reg 145,0
374,6 14 3/4MTR117 (R831) 117 pin З-177 7 5/8 Reg 130,0
MTR427 (R874) 427X pin З-177 7 5/8 Reg 137,0
381,0 15 MTR217 (R2032) 217 pin З-177 7 5/8 Reg 160,0
MTR837 (R815) 837Y pin З-177 7 5/8 Reg 160,0
Motor
Roller Cone Bits Product Lines
46 47
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
MotorPro
TCI bit 8 1/2 MTRP737 (R908)
Cutting structureThis product line may have either milled teeth
or TCI. Cutting structure designed with advanced software systems provides effective drilling of any rock type and prolongs bit life. To increase steel teeth life, a patented material is used that consists of a mixture of spherical cast tungsten carbide and small hard-alloy grains. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be protected with tungsten carbide inserts. For additional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
The gauge and the near gauge rows may include diamond-coated tungsten carbide inserts. Depending on the application, these inserts may come up to 30%, 50% or 100% of the total amount of inserts.
Lubrication systemBit lubrication system is designed to compensate
grease consumption and pressure during long-term operation. It consists of an increased grease reservoir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the grease reservoir with fric-tion areas in bearings.
Shirttail and leg protectionShirttail and leg leading edge are hardfaced and
may be protected with tungsten carbide or diamond inserts or a combination of tungsten carbide and diamond inserts. Bits may have stabilization features to improve bit performance by increasing bearing and cutting structure durability.
Drill bits with premium sealed friction bearing are designed for drilling with high WOB and RPM using downhole hydraulic motor.Designing the bits of this product line involves advanced knowledge-intensive technologies and engineering analysis in the state of the art software systems. High bit performance is achieved due to using of high-quality materials, improved reliability bearings, most recent bit body protec-tion systems and optimum cutting structure layout. This bit type is ideal for horizontal drilling.MotorPro bits use bearings with constituent parts made of antifriction wear-resistant material with silver coating as well as elastomer coating to improve wear characteristics.
MotorPro Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
209,6 8 1/4
MTRP137 (R920) 137 pin З-117 4 1/2 Reg 30,0
MTRP517 (R933) 517X pin З-117 4 1/2 Reg 33,0
MTRP537 (R915) 537X pin З-117 4 1/2 Reg 37,0
MTRP617 (R913) 617X pin З-117 4 1/2 Reg 37,0
212,7 8 3/8
MTRP117 (R896) 117 pin З-117 4 1/2 Reg 35,0
MTRP137 (R925) 137 pin З-117 4 1/2 Reg 35,0
MTRP417 (R946) 417X pin З-117 4 1/2 Reg 35,0
MTRP437 (R947) 437X pin З-117 4 1/2 Reg 35,0
MTRP517 (R862) 517X pin З-117 4 1/2 Reg 37,0
MTRP527 (R951) 527X pin З-117 4 1/2 Reg 35,0
MTRP537 (R869) 537X pin З-117 4 1/2 Reg 35,0
MTRP627 (R875) 627Y pin З-117 4 1/2 Reg 37,0
MTRP737 (R879) 737Y pin З-117 4 1/2 Reg 37,0
MTRP837 (R886) 837Y pin З-117 4 1/2 Reg 37,0
215,9 8 1/2
MTRP117 (R802) 117 pin З-117 4 1/2 Reg 33,0
MTRP127 (R986) 127 pin З-117 4 1/2 Reg 40,0
MTRP137 (R442) 137 pin З-117 4 1/2 Reg 32,9
MTRP137 (R917) 137 pin З-117 4 1/2 Reg 33,0
MTRP437 (R582) 437X pin З-117 4 1/2 Reg 35,0
MTRP447 (R807) 447X pin З-117 4 1/2 Reg 36,0
MTRP517 (R902) 517X pin З-117 4 1/2 Reg 35,0
MTRP527 (R926) 527Х pin З-117 4 1/2 Reg 36,0
MTRP537 (R864) 537X pin З-117 4 1/2 Reg 36,0
MTRP617 (R563) 617Х pin З-117 4 1/2 Reg 37,0
MTRP627 (R2059) 627X pin З-117 4 1/2 Reg 37,0
MTRP627 (R590) 627Y pin З-117 4 1/2 Reg 37,0
MTRP637 (R589) 637Y pin З-117 4 1/2 Reg 37,0
MTRP737 (R908) 737Y pin З-117 4 1/2 Reg 37,0
MTRP837 (R912) 837Y pin З-117 4 1/2 Reg 37,0
295,3 11 5/8
MTRP117 (R931) 117 pin З-152 6 5/8 Reg 90,0
MTRP127 (R991) 127 pin З-152 6 5/8 Reg 90,0
MTRP137 (R927) 137 pin З-152 6 5/8 Reg 90,0
MTRP437 (R114) 437X pin З-152 6 5/8 Reg 90,0
MTRP547 (R419) 547Х pin З-152 6 5/8 Reg 90,0
304,8 12MTRP117 (R916) 117 pin З-152 6 5/8 Reg 85,0
MTRP437 (R918) 437X pin З-152 6 5/8 Reg 95,0
311,1 12 1/4
MTRP117 (R822) 117 pin З-152 6 5/8 Reg 86,0
MTRP127 (R932) 127 pin З-152 6 5/8 Reg 90,0
MTRP437 (R295) 437X pin З-152 6 5/8 Reg 95,0
MTRP447 (R597) 447X pin З-152 6 5/8 Reg 100,0
MTRP517 (R865) 517X pin З-152 6 5/8 Reg 100,0
MTRP537 (R929) 537X pin З-152 6 5/8 Reg 97,0
349,2 13 3/4 MTRP837 (R942) 837Y pin З-152 6 5/8 Reg 140,0
Roller Cone Bits Product Lines
48 49
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Steel teeth bit 11 5/8 STM121 (R187)
TCI bit 11 5/8 STM543 (R175)
StormDrill bits with open bearings are designed specifically for high speed drilling (up to 600 RPM). Without sealing elements in the bearing, it is possible to maximize the journal and the rollers dimensions and to achieve full circu-lation in the bearing which is highly important as it helps reduc-tion of the torque, providing quick cooling action and increasing bearing life.
Cutting structureThis product line may have either milled teeth or TCI. To increase
steel teeth life, steel teeth are hardfaced with wear-resistant tungsten carbide based material. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hardfaced. The gauge may be protected with tungsten carbide inserts. For additional protection against gauge loss, a near gauge of tungsten carbide inserts may be used.
Shirttail and leg protectionShirttail is hardfaced along its leading edge.
StandartStandart line presents open bearing bits with steel teeth or tungsten carbide inserts. They are designed for a wide range of applications, drilling with low speed turbines, downhole hydraulic motor or for rotary drilling. Standart bits use both friction and roller bearings.
Cutting structureThis product line may have either milled
teeth or TC I. To increase steel teeth life, steel teeth are hardfaced with wear-resistant tung-sten carbide based material. Depending on the rock hardness, either side surfaces or side and end surfaces of steel teeth are hard-faced. The gauge may be protected with tungsten carbide inserts. For additional pro-tection against gauge loss, a near gauge of tungsten carbide inserts may be used.
Shirttail and leg protectionShirttail is hardfaced along its leading edge.
Steel teeth bit 4 1/4 STD211 (R548)
Storm Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
171,4 6 3/4 STM121 (R459) 121 pin З-88 3 1/2 Reg 18,5
190,5 7 1/2 STM513 (R225) 513X pin З-117 4 1/2 Reg 30,0
215,9 8 1/2
STM133 (R523) 133 pin З-117 4 1/2 Reg 36,0
STM211 (R192) 211 pin З-117 4 1/2 Reg 35,0
STM513 (R524) 513X pin З-117 4 1/2 Reg 37,0
222,3 8 3/4 STM513 (R515) 513X pin З-117 4 1/2 Reg 33,0
269,9 10 5/8 STM543 (R226) 543X pin З-152 6 5/8 Reg 72,0
295,3 11 5/8
STM121 (R187) 121 pin З-152 6 5/8 Reg 76,2
STM133 (R519) 133 pin З-152 6 5/8 Reg 82,0
STM211 (R166) 211 pin З-152 6 5/8 Reg 84,0
STM543 (R175) 543Х pin З-152 6 5/8 Reg 86,0
Standart Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
95,3 3 3/4 STD211 (R569) 211 pin З-66 2 3/8 Reg 11,1
104,8 4 1/8 STD211 (R549) 211 pin З-66 2 3/8 Reg 6,0
108,0 4 1/4 STD211 (R548) 211 pin З-66 2 3/8 Reg 5,0
117,5 4 5/8 STD211 (R974) 211C pin З-76 2 7/8 Reg 7,0
130,2 5 1/8 STD613 (R236) 613X pin З-76 shortened 2 7/8 Reg 8,0
190,5 7 1/2 STD131 (R64) 131 pin З-117 4 1/2 Reg 30,0
215,9 8 1/2 STD623 (R957) 623CX pin З-117 4 1/2 Reg 37,0
269,9 10 5/8STD231 (R07) 231 pin З-152 6 5/8 Reg 67,0
STD623 (R20) 623X pin З-152 6 5/8 Reg 77,0
295,3 11 5/8STD533 (R95) 533X pin З-152 6 5/8 Reg 95,0
STD623 (R62) 623X pin З-152 6 5/8 Reg 95,0
Roller Cone Bits Product Lines
50 51
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
SingleSmall and medium diameter one-cone bits with sealed bearings are designed for deep drilling and provide increased bit life as compared with three-cone bits.Single bits have uniform friction bearings with hard-faced surfaces.Their strong bearing, powerful cutting structure and high thickness of the cone ensure accident-free highly-efficient performance at greatest depths.When fitted with PDC cutters such bits perfectly cope with high loading during forced drilling practices.The shape of the cone accounts for semispherical cutting at bottom hole. The absence of the gauge relief typical of the three-cone bits, as well as the legs facing the wellbore wall and preventing the quick change of the direction make the one-cone drill bits of the Single Product Line indispensable during horizontal and directional drilling with high build rate.
Cutting structurePatented cutting structure of Single bits is
represented with tungsten carbide hoof-shaped inserts with sharp curvilinear cutting edge, project-ing above the cone body by 5-7mm and having various layout patterns, as well as PDC cutters. Depending on the drilling applications, it is pos-sible to alternate TCI and PDC cutters.
To improve durability of the cutting structure, enhance the performance and reduce casing wear, full surface of the cone can be coated with pat-ented protector by means of detonation spraying.
Lubrication systemBit lubrication system is designed to com-
pensate grease consumption and pressure during long-term operation and consists of a grease reservoir with a rigidly mounted cap, a flexible diaphragm, a metal canister protecting the dia-phragm from breakage, and channels connecting the grease reservoir with friction areas in the bear-ings.
One-cone bit
8 1/2 SGL547 (R812)
Single Product Line
Diameter Bit designation IADC code
Connecting threadWeight, kg
mm in GOST API
124,0 4 7/8 SGL627 (R2007) 627Z pin З-76 2 7/8 Reg 15,0
190,5 7 1/2 SGL547 (R2016) 547Z pin З-117 4 1/2 Reg 37,0
215,9 8 1/2
SGL547 (R812) 547Z pin З-117 4 1/2 Reg 45,0
SGL627 (R2006) 627Z pin З-117 4 1/2 Reg 45,0
Roller Cone Bits Product Lines
52 53
Rol
ler
Con
e D
rill B
its
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUER
olle
r C
one
Dril
l Bits
www.vbm.ru www.vbm.ru
Set of nozzles for roller cone bits
Bit diameter, in Design number Nozzle ID, mm
3 3/4”; 4 1/8”; 4 1/4” R9531 7,9; 9,5; 11,1
4 3/4” – 5” 4 3/4” – 5” for IADC codes 54x, 61x and 62x
R6738 12,7; 14,3; 14,38,7; 12,7; 14,3
5 1/2” – 6” R3401 8,7; 11,1; 14,3
6 1/8” – 6 3/4” R1804 8,7; 11,1; 14,3
7 1/2”; 7 7/8” – 8 1/2”; 8 3/4”; 9 5/8” for IADC codes 54x, 61x and 62x
R0030R0030 (centr.)
12,7; 14,3; 15,912,7
7 1/2”; 7 7/8” – 9 5/8” for other bit types
R0030R0030 (centr.)
14,3; 15,9; 19,014,3
11”; 11 5/8”; 12”; 12 1/4”; 13 3/8”; 13 3/4”; 15 1/2”; 17 1/2” 9 7/8”; 10 5/8”
R0101R0101 (centr.)R0030 (centr.)
19,0; 20,6; 20,615,912,7
16” R9819 (extended)R0101 (centr.)
15,9; 15,9; 15,915,9
14 1/2”; 14 3/4”; 15”; 16”; 17”; 18 1/2”; 19 19/64”
R0101R0101 (centr.)
15,9; 15,9; 15,915,9
20” R0101R0101 (centr.)
19,0; 19,0; 19,015,9
26” R0101R0101 (centr.)
20,6; 20,6; 20,619,0
8 3/8” — 8 3/4” extended nozzles (steel teeth bits)
Tech Spec 3664-034-05749180-01
2018
1815
8 1/2” — 8 3/4” extended nozzles (TCI bits)
2018
1815
*Set of nozzles can be changed on customer request
Torque recommended for thread connections
Bit diameter Connection thread Recommended wrench torque
in mm API GOST Ft-lbs kN.m
3 3/4 - 4 1/4 95,3 - 108,0 2 3/8 Reg З - 66 З000 - 3500 4 - 4,8
4 5/8 - 5 3/8 117,5 - 136,5 2 7/8 Reg З - 76 4500 - 5500 6 - 7,5
5 1/2 - 6 3/4 139,7 - 171,4 3 1/2 Reg З - 88 7000 - 9000 9,5 - 12
7 1/2 - 8 3/4 190,5 - 222,3 4 1/2 Reg З - 117 12000 - 16000 16 - 22
9 5/8 - 13 3/4 244,5 - 349,2 6 5/8 Reg З - 152 28000 - 32000 38 - 43
14 3/4 - 26 374,6 - 660,4 7 5/8 Reg З - 177 З4000 - 40000 46 - 54
Roller cone bits diameter tolerances
Drill bit rated diameter, in Tolerance, in Tolerance, mm
1 3/4” up to and including 13 3/4” +1/32 - 0 +0.8
Over 13 3/4” up to and including 17 1/2” +1/16 - 0 +1.6
Over 17 1/2” +3/32 - 0 +2.4
Technical Information
Volgaburmash. XXI century tools.
Com
pan
y
Com
pan
y
PDC Drill BitsVolgaburmash. XXI century tool.
PD
C D
rill B
its
56 57
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
PDC Bits Designation PDC Bits Design Features
Key features:Improved structural strength and increased PDC
number.
Advantages:Cutting mode is smoother. Drilling efficiency is higher,
the bit is more steerable in directional wells.
Key features:Increased bit wear-resistance.
Advantages:This type of bit gauge protection ensures that the
hole gauge is maintained for a long period of time, which, in its turn, ensures steady bit performance.
Key features:In case of vibrations, shock-
proof inserts restore smooth drilling.
Advantages:The bit operates more steadily, the life of PDC cutters
and general bit performance are increased.
Key features:The cutters interact with forma-
tion when the bit is pulled up.
Advantages:Preventing drill pipe drag provides quicker and safer
pulling out the bit.
Bit spiral blade
PDC cutters on the bit gauge
Спиральнаялопасть долота
Bit anti-vibration protection
Back-reamers
Diameter, in
12 1/4
Product line
Blade count
sFD 5 19 SM
PDC-size
Rock hardness
Design
(A64)
58 59
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
Key features:Protective coating (1) includes solid mass of ultra-
hard tungsten carbide. Powder coating (2) contains het-erogeneous mixture of metallic powders of pulverous matrix components and tungsten carbide.
Advantages:The contents of the hard-facing (1) absorbs impact and
improves corrosion resistance. Powder coating (2) has very high resistance to friction, impacts and erosive action even at high temperature. It has high abrasion resistance.Improved coating of the bit body
with plazma flame spraying and weld penetration
Anti-balling coating
Key features:Anti-balling coating of the bit body with a special-
ized alloy prevents cuttings sticking to the bit body.
Advantages:This features stabilizes drilling in various applications by
preventing bit balling and stabilizing ROP.
Key features:Bearing inserts limit depth of
cut of the bit.
Advantages:Depth-of-cut control lessens bit torque and improves
steerability in directional drilling.Bearing inserts on the inner cone
of the bit profile
FastDrillThese steel body PDC bits are designed for full diam-eter drilling of oil and gas vertical and directional wells. They give high performance and high ROPs.
PDC bit5 1/2 FD413S (A303)
FastDrill Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
83,0 3 9/32 FD409МA (A83) S233 pin З-66 2 3/8 Reg 5,0
92,0 3 5/8 FD409MA (A84) S233 pin З-66 2 3/8 Reg 6,2
98,4 3 7/8 FD413SM (A620) S233 pin З-66 2 3/8 Reg 5,0
114,0 4 1/2 FD609MA (A85) S223 pin З-66 2 3/8 Reg 6,0
118,0 4 21/32 FD313S (A437) S233 pin З-50 - 4,5
120,6 4 3/4FD313S (A386) S233 pin З-76 2 7/8 Reg 10,0
FD613SM (A86) S332 pin З-76 2 7/8 Reg 11,5
123,8 4 7/8
FD413SM (A301) S233 pin З-76 2 7/8 Reg 11,0
FD513SM (A473) S332 pin З-76 2 7/8 Reg 10,5
FD609SMA (A300) S233 pin З-76 2 7/8 Reg 10,3
124,0 4 7/8FD413SMA (A249) S233 pin З-76 2 7/8 Reg 12,0
FD609SMA (A104) S233 pin З-76 2 7/8 Reg 10,0
126,0 4 31/32FD413SMA (A289) S233 pin З-76 2 7/8 Reg 11,5
FD613SMA (A321) S233 pin З-76 2 7/8 Reg 10,0
132,0 5 3/16 FD313S (A387) S233 pin З-63,5 - 10,0
139,7 5 1/2FD513M (A01) S333 pin З-88 3 1/2 Reg 18,0
FD813MH (A302) S333 pin З-88 3 1/2 Reg 17,0
141,0 5 35/64 FD313S (A438) S233 pin З-76 2 7/8 Reg 12,2
142,9 5 5/8
FD613SM (A62) S233 pin З-88 3 1/2 Reg 18,0
FD709MH (A87) S333 pin З-88 3 1/2 Reg 17,0
FD713M (A420) S333 pin З-88 3 1/2 Reg 16,5
144,4 5 11/16 FD613MH (A88) S233 pin З-88 3 1/2 Reg 16,0
PDC Bits Design Features PDC Bits Product Lines
60 61
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
FastDrill Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
146,0 5 3/4FD513SM (A397) S232 pin З-88 3 1/2 Reg 16,0FD613SM (A396) S232 pin З-88 3 1/2 Reg 17,0FD713M (A426) S333 pin З-88 3 1/2 Reg 17,0
149,2 5 7/8FD513SM (A34) S233 pin З-88 3 1/2 Reg 19,0
FD713MH (A485) S333 pin З-88 3 1/2 Reg 18,0
152,4 6
FD413SM (A285) S223 pin З-88 3 1/2 Reg 18,0FD513SM (A106) S233 pin З-88 3 1/2 Reg 19,0FD609MA (A107) S233 pin З-88 3 1/2 Reg 16,0FD713MH (A169) S333 pin З-88 3 1/2 Reg 18,0
155,6 6 1/8
FD416S (A286) S223 pin З-88 3 1/2 Reg 18,0FD609MА (A89) S233 pin З-88 3 1/2 Reg 18,0FD613SM (A471) S333 pin З-88 3 1/2 Reg 9,5FD713MH (A460) S332 pin З-88 3 1/2 Reg 17,5
161,0 6 21/62 FD313S (A439) S233 pin З-76 2 7/8 Reg 15,5
165,1 6 1/2FD513M (A06) S223 pin З-88 3 1/2 Reg 20,0
FD613SM (A474) S333 pin З-88 3 1/2 Reg 25,0FD713MH (A469) S332 pin З-88 3 1/2 Reg 18,3
190,5 7 1/2
FD313S (A388) S233 pin З-117 4 1/2 Reg 33,0FD416S (A433) S323 pin З-117 4 1/2 Reg 36,5FD613SM (A77) S233 pin З-117 4 1/2 Reg 37,0FD813MH (A97) S333 pin З-117 4 1/2 Reg 38,0
195,0 7 11/16 FD613SM (A390) S233 pin З-117 4 1/2 Reg 35,5214,3 8 7/16 FD613SM (A149) S233 pin З-117 4 1/2 Reg 42,0
215,9 8 1/2
FD313S (A389) S233 pin З-117 4 1/2 Reg 40,0 FD613MH (A359) S433 pin З-117 4 1/2 Reg 45,0
FD416S (A368) S223 pin З-117 4 1/2 Reg 42,0FD416SM (A400) S223 pin З-117 4 1/2 Reg 44,0FD416SM (A466) S222 pin З-117 4 1/2 Reg 41,5FD416SM (A478) S223 pin З-117 4 1/2 Reg 44,0FD419S (A284) S223 pin З-117 4 1/2 Reg 41,0FD419S (A382) S222 pin З-117 4 1/2 Reg 42,0
FD513MH (A404) S434 pin З-117 4 1/2 Reg 45.4FD513SM (A488) S333 pin З-117 4 1/2 Reg 43,0FD516MH (A415) S322 pin З-117 4 1/2 Reg 42,0FD516SM (A477) S223 pin З-117 4 1/2 Reg 42,0FD613SM (A418) S233 pin З-117 4 1/2 Reg 43,0FD616MH (A369) S423 pin З-117 4 1/2 Reg 49,0FD616SM (A248) S224 pin З-117 4 1/2 Reg 44,0FD619SM (A153) S233 pin З-117 4 1/2 Reg 45,0FD713MH (A170) S334 pin З-117 4 1/2 Reg 49,0FD716MH (A309) S324 pin З-117 4 1/2 Reg 47,0FD813MH (A155) S434 pin З-117 4 1/2 Reg 50,0FD816MH (A463) S424 pin З-117 4 1/2 Reg 50.5FD913MH (A105) S434 pin З-117 4 1/2 Reg 48,5
219,1 8 5/8 FD613SM (A419) S233 pin З-117 4 1/2 Reg 40,0
FastDrill Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
220,7 8 11/16
FD416SM (A346) S223 pin З-117 4 1/2 Reg 42,0
FD416SM (A417) S223 pin З-117 4 1/2 Reg 45,5
FD416SM (A423) S223 pin З-117 4 1/2 Reg 49,0
FD419S (A245) S223 pin З-117 4 1/2 Reg 41,0
FD419S (A383) S222 pin З-117 4 1/2 Reg 43,0
FD516SM (A350) S223 pin З-117 4 1/2 Reg 43,0
FD613MH (A360) S433 pin З-117 4 1/2 Reg 45,0
FD613SM (A399) S233 pin З-117 4 1/2 Reg 40,0
FD613SM (A422) S233 pin З-117 4 1/2 Reg 46,0
FD616SM (A351) S224 pin З-117 4 1/2 Reg 44,0
FD813MH (A175) S333 pin З-117 4 1/2 Reg 51,0
222,3 8 3/4 FD616SM (A421) S323 pin З-117 4 1/2 Reg 43,5
250,8 9 7/8FD519S (A192) S223 pin З-152 6 5/8 Reg 64,0
FD616SM (A90) S223 pin З-152 6 5/8 Reg 63,5
269,9 10 5/8
FD416SM (A432) S323 pin З-152 6 5/8 Reg 69,0
FD519S (A196) S223 pin З-152 6 5/8 Reg 65,0
FD616SM (A102) S223 pin З-152 6 5/8 Reg 67,4
FD716SM (A307) S223 pin З-152 6 5/8 Reg 76,0
295,3 11 5/8
FD419SM (A436) S323 pin З-152 6 5/8 Reg 82,0
FD613MH (A361) S433 pin З-152 6 5/8 Reg 86,5
FD616M (A398) S424 pin З-152 6 5/8 Reg 95,0
FD619SM (A129) S223 pin З-152 6 5/8 Reg 83,0
FD619SM (A395) S223 pin З-152 6 5/8 Reg 80,0
FD619SM (A406) S323 pin З-152 6 5/8 Reg 83,0
FD716M (A425) S323 pin З-152 6 5/8 Reg 84,0
FD816MH (A472) S424 pin З-152 6 5/8 Reg 96,0
311,1 12 1/4
FD519SM (A392) S223 pin З-152 6 5/8 Reg 84,0
FD613MH (A385) S333 pin З-152 6 5/8 Reg 92,0
FD616SM (A157) S223 pin З-152 6 5/8 Reg 81,0
FD619SM (A140) S223 pin З-152 6 5/8 Reg 91,0
FD619SM (A393) S323 pin З-152 6 5/8 Reg 83,7
FD713SM (A162) S233 pin З-152 6 5/8 Reg 84,0
FD716SM (A121) S223 pin З-152 6 5/8 Reg 87,0
374,7 14 3/4 FD716SM (A128) S223 pin З-177 7 5/8 Reg 97,0
393,7 15 1/2FD419SM (A288) S223 pin З-177 7 5/8 Reg 162,0
FD816MH (A467) S424 pin З-177 7 5/8 Reg 200,0
406,4 16 FD619SM (A73) S224 pin З-177 7 5/8 Reg 180,0
431,8 17 FD619SM (A123) S224 pin З-177 7 5/8 Reg 190,0
444,5 17 1/2FD519SM (A130) S223 pin З-177 7 5/8 Reg 151,0
FD619SM (A82) S224 pin З-177 7 5/8 Reg 190,0
PDC Bits Product Line
62 63
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
FastDrillMatrixThese matrix body PDC bits are designed for drill-ing wells in complicated drilling applications and for drilling long sections where the key task is drill-ing a section in one trip. The bits have high resis-tance to abrasiveness and erosion.
PDC bit 8 1/2 FDM616 (AM369)
FastDrillMatrix Product LineDiameter
Bit designation IADC code
Connecting threadWeight,
kgmm in GOST API
152,4 6 FDM613MH (AM452) М432 pin З-88 3 1/2 Reg 26,0
215,9 8 1/2
FDM613MH (AM424) M434 pin З-117 4 1/2 Reg 78,0
FDM616MH (AM369) М323 pin З-117 4 1/2 Reg 70,0
FDM616MH (AM465) М423 pin З-117 4 1/2 Reg 112,0
FDM716MH (AM309) M323 pin З-117 4 1/2 Reg 73,0
219,1 8 5/8 FDM616MH (AM449) M424 pin З-117 4 1/2 Reg 75,0
220,7 8 11/16 FDM616MH (AM451) M423 pin З-117 4 1/2 Reg 77,0
222,3 8 3/4 FDM716MH (AM427) М423 pin З-117 4 1/2 Reg 82,0
295,3 11 5/8FDM516MH (AM412) М423 pin З-152 6 5/8 Reg 150,0
FDM616MH (AM441) М422 pin З-152 6 5/8 Reg 130,0
311,1 12 1/4 FDM616MH (AM450) M422 pin З-152 6 5/8 Reg 140,0
smartFastDrillThese bits are designed for full diameter drilling of oil and gas vertical and directional wells. Premium smart-FastDrill PDC bits are developed with unique software system giving an opportunity of making up optimal cutting structure for efficient rock drilling. This method increases bit dynamic stability, ROP and wear-resistance, аs well as provides high bit steerability.
PDC bit 15 1/2 sFD619SM (A56)
smartFastDrill Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
123,8 4 7/8 sFD613M (A410) S332 pin З-76 2 7/8 Reg 12,0
124,0 4 7/8 sFD613M (A440) S332 pin З-76 2 7/8 Reg 12,0
139,7 5 1/2sFD413SM (A407) S233 pin З-88 3 1/2 Reg 16,0
sFD613M (A408) S332 pin З-88 3 1/2 Reg 16,5
142,9 5 5/8sFD413SM (A304) S233 pin З-88 3 1/2 Reg 16,2
sFD613M (A409) S332 pin З-88 3 1/2 Reg 16,7
215,9 8 1/2
sFD519SM (A147) S223 pin З-117 4 1/2 Reg 47,0
sFD613SM (A405) S333 pin З-117 4 1/2 Reg 41,0
sFD616SM (A154) S233 pin З-117 4 1/2 Reg 42,0
219,1 8 5/8sFD416SM (A348) S223 pin З-117 4 1/2 Reg 44,0
sFD613SM (A462) S333 pin З-117 4 1/2 Reg 40,0
220,7 8 11/16 sFD613SM (A461) S333 pin З-117 4 1/2 Reg 41,0
295,3 11 5/8sFD419S (A394) S222 pin З-152 6 5/8 Reg 82,0
sFD519SM (A47) S223 pin З-152 6 5/8 Reg 75,0
300,0 11 13/16sFD419S (A342) S223 pin З-152 6 5/8 Reg 77,0
sFD519SM (A243) S223 pin З-152 6 5/8 Reg 80,0
311,1 12 1/4 sFD419S (A391) S222 pin З-152 6 5/8 Reg 87,0
393,7 15 1/2 sFD619SM (A56) S323 pin З-177 7 5/8 Reg 188,0
PDC Bits Product Line
64 65
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
PDC bit8 7/16 WT613SM (A445)
These are steel body PDC bits. The bits are designed for wiper drift-ing and borehole reaming. The bits have PDC and TCI in their cutting structure. The design has a parabolic profile preventing self-induced side-tracking.
WiperTrip Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
142,9 5 5/8 WT613S (A416) S234 box З-86 box NC31 17,0
214,0 8 7/16 WT613SM (A445) S134 box З-117 box 4 1/2 Reg 41,5
215,9 8 1/2 WT413SM (A447) S134 box З-133 box NC 50 42,5
218,0 8 19/32 WT613SM (A446) S134 box З-117 box 4 1/2 Reg 43,0
WiperTrip
SideTrack
Side-tracking PDC bit8 1/2 ST613MH (A100)
Side-tracking PDC bits are designed for side-tracking in open hole with water or mud flushing. The bits can be used in rotary, turbine drilling or with downhole motors.
SideTrack Product LineDiameter
Bit designation IADC codeConnecting thread Weight,
kgmm in GOST API
139,7 5 1/2 ST613MH (A242) S231 pin З-88 3 1/2 Reg 14,7
142,9 5 5/8 ST613MH (A468) S231 pin З-88 3 1/2 Reg 15,0
215,9 8 1/2 ST613MH (A100) S231 pin З-117 4 1/2 Reg 35,6
220,7 8 11/16 ST613MH (A384) S331 pin З-117 4 1/2 Reg 36,0
295,3 11 5/8 ST613MH (A240) S231 pin З-152 6 5/8 Reg 73,0BicentricDrill Product LineDiameter
Bit designation IADC code
Connecting threadWeight, kg
mm in GOST API
120,6 x 142,9 4 3/4 x 5 5/8 BD613M (A14) S233 pin З-76 2 7/8 Reg 14,5
139,7 х 165,1 5 1/2 х 6 1/2 BD613MH (A26) S233 pin З-88 3 1/2 Reg 22,0
152,4 х 175,0 6 x 6 7/8 BD613SM (A58) S233 pin З-88 3 1/2 Reg 26,0
165,1 х 190,5 6 1/2 x 7 1/2 BD713MH (A144) S233 pin З-88 3 1/2 Reg 31,0
215,9 х 238,2 8 1/2 x 9 3/8 BD713SM (A19) S233 pin З-117 4 1/2 Reg 70,0
215,9 х 250,8 8 1/2 x 9 7/8 BD613SM (A136) S233 pin З-117 4 1/2 Reg 61,0
215,9 х 266,7 8 1/2 x 10 1/2 BD713SM (A71) S233 pin З-117 4 1/2 Reg 70,0
241,2 х 269,9 9 1/2 x 10 5/8 BD713MH (A317) S233 pin З-152 6 5/8 Reg 83,0
311,1 х 342,9 12 1/4 x 13 1/2
BD713MH (A241) S233 pin З-152 6 5/8 Reg 150,0
BD716MH (A316) S323 pin З-152 6 5/8 Reg 147,0
BicentricDrill
Bicentric PDC bit 6 x 6 14/16 BD613SM (A58)
Bicentric steel body PDC bits of BicentricDrill line are designed for drilling with simultaneous borehole opening of oil and gas vertical and directional wells. Absence of moving parts eliminates possibility of their being lost in the well. Other advantages of BicentricDrill bits are their ROP comparable with the standard one and bits cost reduction.
PDC Bits Product Line
66 67
PD
C D
rill B
itsProducts for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
PD
C D
rill B
its
www.vbm.ru www.vbm.ru
Core bit8 3/8 / 3 1/8 CB613SM (A38)
Core bit8 3/8 / 3 7/8 CB613SM (A45)
Core bit8 3/8 / 3 1/8 CB1009MH (A68)
CoreBitsSteel body PDC core bits are designed for drilling oil and gas wells with simultaneous core recovery.
Core Bits Product Lines Technical information
Torque recommended for thread connections
Connecting threadRecommended torque, kNm
API GOST
2 3/8 З-66 4,0 - 4,8
2 7/8 З-76 6,0 – 7,5
3 1/2 З-88 9,5 – 12,0
4 1/2 З-117 16,0 – 22,0
6 5/8 З-152 38,0 – 43,0
7 5/8 З-177 46,0 – 54,0
PDC bits diameter tolerance
Drill bit rated diameter, in Tolerance, in Tolerance, mm
Less than 6 3/4 +0 - 0,015 –0.38
6 25/32 to 9 +0 - 0,020 –0.51
9 1/31 to 13 3/4 +0 - 0,030 –0.76
13 25/32 to 17 1/2 +0 - 0,045 –1.14
Over 17 17/32 +0 - 0,063 –1.60
Nozzle types for PDC bits
Nozzletype
Nozzles ID, in/mm
7/32 8/32 9/32 10/32 11/32 12/32 13/32 14/32 15/32 16/32 18/32 20/32 22/32 24/32 26/32 28/32
5,6 6,4 7,1 7,9 8,7 9,5 10,3 11,1 11,9 12,7 14,3 15,9 17,5 19,1 20,6 22,2
22, ports * * * * * * *
27 * * * * * * * * * * * *
39 * * * * * * * * * * * * * * *
RPM recommended for PDC drill bits and core bits
Product type Blade countDrill bits and core bits diameter, in
3 9/32 to 5 1/2 5 5/8 to 7 7/8 8 3/8 to 9 7/8 10 5/8 to 17 1/2
Drill bits
3 - 4 60...400 60...400 60...350 60...350
5 - 6 60...200 60...250 60...350 60...400
7 - 8 60...200 60...280 60...350 60...400
More than 9 - 60...250 60...300 60...400
Core bits More than 4 60...120 60...120 60...120 60...120
Formation hardnessS Soft
SM Soft with medium stringers
M Medium
MH Medium with hard stringers
CoreBits Product LineDiameter Core bit
designationIADC code
Connecting thread Weight,
kgmm in GOST API
139,7 / 52,0 5 1/2 / 2 1/32 CB613SM (A25) S132 box МК 110 х 6 х 1:8 10,0
139,7 / 67,0 5 1/2 / 2 5/8 CB613SM (A353) S132 box МК 110 х 6 х 1:8 9,0
146,0 / 80,0 5 3/4 / 3 1/8 CB613SM (A458) S133 box МК 119 х 4 х 1:16 8,0
158,7 / 67,0 6 1/4 / 2 5/8 CB613SM (A37) S133 box З-133 13,0
163,5 / 67,0 6 7/16 / 2 5/8 CB813МН (A92) S123 box З-133 NC 50 16,8
187,3 / 80,0 7 3/8 / 3 1/8 CB613SM (A35) S132 box МК 150 х 6 х 1:8 19,0
195,0 / 80,0 7 11/16 / 3 1/8 CB913MH (A174) S233 box МК 150 х 6 х 1:8 19,0
212,7 / 80,0 8 3/8 / 3 1/8 CB613SM (A459) S233 box З-150 22,0
212,7 / 80,0 8 3/8 / 3 1/8 CB613SM (A38) S133 box МК 150 х 6 х 1:8 20,0
212,7 / 80,0 8 3/8 / 3 1/8 CB1009MH (A68) S233 box МК 150 х 6 х 1:8 28,6
212,7 / 100,0 8 3/8 / 3 7/8 CB613SM (A45) S133 box З-161 23,0
212,7 / 100,0 8 3/8 / 3 7/8 CB1009MH (A69) S233 box З-161 24,5
215,9 / 80,0 8 1/2 / 3 1/8 CB613SM (A431) S133 box МК 150 х 6 х 1:8 20,0
215,9 / 80,0 8 1/2 / 3 1/8 CB813SM (A74) S233 box МК 150 х 6 х 1:8 23,0
215,9 / 100,0 8 1/2 / 3 7/8 СВ1009MH (A292) S233 box З-171 6 5/8 FH 23,0
Volgaburmash. XXI century tools.
Com
pan
y
BHA Constituent Elements
BH
A C
onst
ituen
t E
lem
ents
70 71
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
BH
A C
onst
ituen
t E
lem
ents
www.vbm.ru www.vbm.ru
Hole-openers
Bladed and rock bit hole-openers up to 920 mm (36 1/4 inch) in diameter are used for hole-opening while drilling oil and gas wells, as well as at any sites due to technical factors, including the regions of the Far North. A hole-opener combined with a pilot bit can replace a large diameter bit.Several patented original technical solutions were implemented in hole-openers design. The prod-uct is characterized by the operating convenience and reliability, it helps customers reduce drilling time and drilling costs.
Bladed hole-openersDiameter
Designation
Pilot bit diameter
Rock hardness category
Connecting thread Диаметр
резца
PDC,мм
Number
of cones
Length,
mm
Weight,
kgmm in mm in GOST API
711,0 28 1-РЛ711,0МС 490,019
9/32МС
box З-171 / box З-171
box 6 5/8 FH / box 6 5/8 FH
16 6 1100 763,0
920,036
7/321-РЛ920,0МС 508,0
20 1/32
МСbox З-171 / box
З-171box 6 5/8 FH / box 6 5/8 FH
16 6 1200 1070,0
Rock bit hole-openers
Diameter
Designation
Pilot bit diameter Rock
hardness category
Connecting threadNumber
of cones
Length,
mm
Weight,
kgmm in mm in GOST API
558,8 22РШ-558,
8М-R2031393,7 15 1/2 М
box З-171 / box З-171
box 6 5/8 FH / box 6 5/8 FH
4 1700 590,0
711,2 28РШ-711,
2М-R2030444,5 17 1/2 М
box З-171 / box З-171
box 6 5/8 FH / box 6 5/8 FH
4 1700 836,0
Rock bit hole-opener РШ-558, 8М-R2031
String Stabilizers
String stabilizer1-Ц 219,0 МСТК
String stabilizers are designed to balance drill string and downhole motor, to stabilize or modify well-bore trajectory.
Application:Drilling soft, medium, hard and solid formations (MCTK type).
Design:Bearing sur faces of the blades are hardfaced with wear-
resistant material to prevent early wear. PDC cutters on the bearing sur faces improve durability of string stabilizers.
Application:Opening oil and gas wells as well as using when
building oil and gas pipelines and different utility systems in soft, medium and hard formations, borehole is washed with water or drilling mud.
Design:The hole-openers are manufactured from sec-
tions of roller cone bits with sealed or open bearings, with TCI or milled cutting structure.
Application:Opening bore hole in different types of formations: from soft with medium interlayers to hard formations.
Design:Work sur faces of the hole-opener are applied
with wear-resistant material to prevent early wear of the blades. PDC cutters on the gauge improve wear-resistance of the design.
String Stabilizers Product Line
DesignationString stabilizer
diameterConnecting thread Total
lenght,mm
Working part
lenght, mm
Weight,kg
mm in GOST API
1-Ц 219,0 МСТК 219,0 8 5/8 З-147/З-133 5 1/2 FH/NC50 500 150 57
Rock bit hole-openers
Bladed hole-openers
BH
A C
onst
ituen
t E
lem
ents
Bladed hole-opener 1-РЛ711, 0МС
72 73
BH
A C
onst
ituen
t E
lem
ents
Products for oil&gas industryCATALOGUEProducts for oil&gas industryCATALOGUE
BH
A C
onst
ituen
t E
lem
ents
www.vbm.ru www.vbm.ru
Near-bit Stabilzers Subs
Subs are designed for interconnecting drill string com-ponents and making up drilling tools used for drilling a well.
Subs М-152/152
Subs Product LineDiameter,
mmDesignation Lenght, mm Inner diameter, mm
Weight, kg
140,0 М-117/117 355 78 23,3
140,0 Н-117/117 463 58 44,0
140,0 П-117/117 355 58 36,0
155,0 М-133/117 385 78 32,0
155,0 П-133/133 484 95 24,0
178,0 П-133/147 520 101 46,1
178,0 П-147/133 524 95 44,0
178,0 М-147/117 400 78 33,5
190,00 П-147/147 527 80 63,0
195,00 П-133/133 484 95 56,0
195,00 П-147/147 527 80 68,0
195,00 П-133/133 484 95 53,0
197,00 М-152/152 391 101 42,0
203,00 П-147/171 521 101 62,8
203,00 Н-171/171 528 101 79,0
225,00 Н-171/177 550 101 79,0
225,00 П-177/171 517 90 98,8
225,00 П-177/152 517 98 114,0
226,00 М-171/177 415 101 79,0
228,00 П-171/171 1600 90 350,0
229,00 М-171/177 415 101 76,9
229,00 М-177/152 400 122 72,0
229,00 М-152/171 400 122 77,8
229,00 П-171/171 1127 90 225,0
Near-bit stabilizer1-КА 220,7 CТ
Near-bit stabilizers are designed for reaming the wellbore and improvement of bit and downhole motor performance.
Application:Drilling soft and medium abrasive formations
(MC-type);
Drilling medium abrasive and hard formations (CT-type).
Design:Bearing surfaces of the blades are hard-
faced with wear-resistant material to prevent early wear. PDC cutters on the bearing sur-faces improve durability of near-bit stabilizers.
Near-bit Product Line
DesignationNear-bit diameter
Connecting thread Total lenght,
mm
Working part
lenght, mm
Weight,kg
mm in GOST API
1-КА 212,0 СТ 212,0 8 11/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 43,0
1-КА 213,0 СТ 213,0 8 3/8 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 48,8
2-КА 213,5 СТ 213,5 8 13/32 Pin З-147/box З-133 5 1/2 FH/NC50 500 153 64,0
1-КА 214,0 СТ 214,0 8 7/16 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 49,0
1-КА215,1МС 215,1 8 15/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 523 150 62,0
1-КА 215,9 СТ 215,9 8 1/2 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 43,0
2-КА215,9СТ 215,9 8 1/2 Pin З-133/box 3-133 NC 50 / NC 50 500 153 55,0
2-КА 215,9 СТ-02 215,9 8 1/2 Box З-133/box 3-133 NC 50 / NC 50 386 155 49,0
3-КА 215,9 СТ 215,9 8 1/2 Pin З-147/box 3-133 5 1/2 FH/NC50 350 115 43,0
1-КА 218,0 СТ 218,0 8 19/32 Box З-133/box З-133 NC50/NC50 386 150 47,0
1-КА 218,0 СТ-01 218,0 8 19/32 Box З-133/box З-133 NC50/NC50 386 155 49,0
2-КА 218,0 СТ 218,0 8 19/32 Pin З-147/box З-133 5 1/2 FH/NC50 350 115 43,5
1-КА218,2МС 218,0 8 19/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 526 150 62,0
1-КА 220,7 СТ 220,7 8 11/16 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 44,0
1-КА 292,0 СТ 292,0 11 1/2 Box З-152/box З-147 6 5/8 Reg/5 1/2 FH 505 220 103,0
1-КА 294,0 СТ 294,0 11 9/16 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 395 227 93,0
2-КА 294,0 СТ 294,0 11 9/16 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 483 226 103,0
1-КА 295,3 СТ 295,3 11 5/8 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 395 225 93,0
1-КА 311,1 СТ 311,1 12 1/4 Box З-152/box З-14 6 5/8 Reg/5 1/2 FH 505 200 103,0
1-КА 393,7 СТ 393,7 15 1/2 Box З-177/box З-152 7 5/8 Reg/6 5/8 Reg 390 180 148,0
74
Products for oil&gas industryCATALOGUE
www.vbm.ru
Contacts
Groznenskaya 1, Samara, 443004, Russia
Tel. +7 (846) 300-8000
Fax +7 (846) 300-8000
www.vbm.ru
E-mai l: ma i [email protected]
Volgaburmash, JSC
Samarsk iy Burovoy Instrument (Samara Dr i l l ing Tools), LLC
Zvenigorodskaya 22, Saint Petersburg, 191119, Russia, of f ice 342-343
Tel./ fax: +7 (812) 713-35-00 emai l: expor [email protected]
Distributor
Groznenskaya 1, Samara, 443004, RussiaTel.: +7(846) 300-8000Fax: +7(846) 300-8000
E-mail: [email protected]
Volgaburmash, JSC
www.vbm.ru© VOLGABURMASH, JSC
7 63 22 1408