catalogue comain en

8/19/2019 Catalogue Comain En

http://slidepdf.com/reader/full/catalogue-comain-en 1/8

// Table of content Features

Benefits

Solutions

Basic components

2

2

4

7

// Simple handset all-rounder

COMAIN

Light Modular Formwork



2

COMAIN Light Modular Formwork

// Features

Light crane-independent formwork for walls and

foundations.

Permissible concrete pressure: 40 kN/m2.

3 different panel heights: 2.4 m / 1.5 m / 1.2 m.

Panel widths of 0.9 m / 0.6 m / 0.45 m / 0.3 m / 0.2 min most heights.

Panels of maximum lightness.

Perfect for vertical structures in small or large areas: walls, foundations,

beam sides, “overhanging slabs” (wall-slab connection cast in one piece),columns.

// Benefits



3


1.2 m panel range

1.5 m panel range

2.4 m panel range

0.2 0.3 0.4 0.45 0.5 0.6 0.65 0.7 0.80.75

0.9 0.95 1.0 1.1 1.2

1.8

2.4

3.0

0.3 0.45

0.6 0.75

0.9 1.05

1.2 1.35

1.5 1.65

1.8 1.95

2.1 2.25

2.4 2.55

2.7 2.85

3.0

3.0

2.4

0.8

0.2 0.3 0.4 0.45 0.5 0.6 0.65 0.75

0.2 0.3 0 .45 0.6 0.9

0.3 0.45 0.6 0.9

0.2 0.3 0.45 0.6

Simple joining of panels with bolt

(consisting of bolt and captive wedge).

1.- Insert the bolt into the hole 2.- Turn the bolt 90º 3.- Fix the wedge of the bolt

Sequence for panel assembly with bolt:

Utmost flexibility due to wide panels range (including

universal and corner panels) for any geometry and

dimension.

Optimised form tie placing.

Lifting, transfer and placing of entire formwork units

possible achieving highest efficiency.

Wide height range



4


Climbing formwork

Straight walls

Circular walls

// Solutions

Wall formwork

Formwork for foundations and footings

COMAIN in gallery wall



5


Beam and slab formwork

Column formwork

COMAIN as beam side formwork

Slab edgeCOMAIN on ENKOFLEX shored with ALUPROP towers

COMAIN columns stabilised with push-pull props

Tall columns surrounded with BRIO Modular Scaffolding for access andworking platforms

Other applications are as pier cap



6


Technical solutions

Working platforms

Stabilisation

Corners not 90º

Pilasters

BulkheadFillers Corners at 90º



7


COMAIN Panel 2.4 x 0.6 (1.44 m2) 1850188 46.9

COMAIN Panel 2.4 x 0.45 (1.08 m2) 1850197 40.6

COMAIN Panel 2.4 x 0.3 (0.72 m2) 1850202 28.3

COMAIN Panel 2.4 x 0.2 (0.48 m2) 1850207 24.1

COMAIN Panel 1.5 x 0.9 (1.35 m2) 1850372 42.1

COMAIN Panel 1.5 x 0.6 (0.9 m2) 1850378 30

COMAIN Panel 1.5 x 0.45 (0.675 m2) 1850382 25.9

COMAIN Panel 1.5 x 0.3 (0.45 m2) 1850386 17.9

COMAIN Panel 1.2 x 0.9 (1.08 m2) 1850100 34.4

COMAIN Panel 1.2 x 0.6 (0.72 m2) 1850113 24.4

COMAIN Panel 1.2 x 0.45 (0.54 m2) 1850118 21

COMAIN Panel 1.2 x 0.3 (0.36 m2) 1850124 14.4

COMAIN Panel 1.2 x 0.2 (0.24 m2) 1850129 12.2

COMAIN Inside Corner 2.4 m 1850220 61

COMAIN Inside Corner 1.5 m 1850390 38.1

COMAIN Inside Corner 1.2 m 1850145 31.2

COMAIN Outside Corner 2.4 m 1850223 14.6




COMAIN lifting hook 1850322 4.6

COMAIN walkway bracket 1850173 8.8

Handrail support 1850278 2.6

Safety handrail S-V 1860516 3.9

Padlock 1850364 0.45

Top tie bracket 1850315 0.97

Foundation head CMN 1850446 1.7

Foundation plate 25 1850453 16.6

Foundation plate 1850301 1.7

COMAIN Int Hinged Corner 2.4 m 1850212 47.4



COMAIN Out Hinged Corner 2.4 m 1850319 17.6

COMAIN Out Hinged Corner 1.5 m 1850411 11

COMAIN Out Hinged Corner 1.2 m 1850316 8.8

Bolt 1850134 0.29

COMAIN Waler 3 1850433 18.2

COMAIN Waler 1.6 1850159 9.8

COMAIN Waler 0.75 1850162 4.8

Hook 1850164 0.45

Long hook 1850183 0.71

Plate nut 15 7238000 0.73

kg kgkg



ULMA C y E, S. Coop.Ps. Otadui, 3 - P.O. 13

20560 Oñati, Spain

T. +34 943 034 900

F. +34 943 034 920

ny safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For theurpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained inhis document, and the data on stress and loads should be respected. ULMA’s Technical Department must be consulted anytimehat field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elementsf the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only.ombining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company

reserves the right to introduce any modifications deemed necessary for the technical development of the product.All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic ormechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval systemwithout the written permission.

© Copyright by ULMA C y E, S. Coop

MPORTANT:

www.ulmaconstruction.com

01FDS06

catalogue comain en

Documents