catalogue fixtures
DESCRIPTION
door hinges, door supplies and wall supportsTRANSCRIPT
i n t r o d u c i n g o u r
f i x t u r e s
It is a pleasure you came across our company - Schäfer Bädertechnik GmbH. As a manufacturer of bath and pool equipment we supply a wide range of products that fit your facilities. Your wish is our premise. A brief excerpt from our offers: bath shelves, door hinges, door bumpers, clothes hangers, hanger hooks, rugged shelves, pool gratings, suction gratings, … and a good deal more. Enduring solutions from Germany: Meeting your standard for 70 years and counting. Do you want your idea to come true? Ask for individual advice. We invite you to keep an eye on the whole choice of products: Visit our web page baedertechnik.com. . Could we get you into one of our numerous items? Please do not hesitate - contact us! Looking forward to hearing from you... Yours faithfully, the SCHÄFER company
It‘s no empty promise.
Furnishing your facility.
Devices to fasten a door steadily. Available
for both swing directions, including torsion
springs on demand.
Our stainless hinges move every door. Well
suited to dozens of door types they fit into
countless scopes.
Decide - which approach comes into your
consideration: Rising hinges, a hinge without
torsion spring or even a heavy-duty one?
Do you need a concept for the exterior?
You cannot mess it up with SCHÄFER hinges.
Goods of rust-free material to your
satisfaction.
The right hinge for every door - that definitely is no
mere promise. Customised products at your disposal.
We are able to adjust the torsion springs‘ tension at
your desire. Whenever there is a question on your
mind, you will get the right solution.
door hinges
4
rising hinge NO 61.54
pluggable hinge
made of synthetic -
pin made of stainless steel
Indicate the required installation side, please.
measurements: 35 x 100 mm
knuckle diameter: 16 mm
door hinge NO 61.79
overlying hinge
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
frame wing: 36 x 80 mm
door wing: 85 x 42 mm
knuckle diameter: 18 mm
door hinge NO 62.59
door hinge for both installation sides
additional slab NO 62.58.03
to be used for glass doors available
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
measurements: 80 x 116 mm
knuckle diameter: 18 mm
protective lids made of stainless steel enclosed on request
In case only one torsion spring is required NO 62.59 can be combined with spring hinge NO 62.58.
spring hinge NO 62.61
overlying hinge including adjustable
torsion spring | meant for closing doors
theft-proof mounting brackets enclosed on request
No 62.62 = meant for opening doors
made of silver anodised or
synthetic-coated aluminium -
pin made of stainless steel
measurements: 80 x 80 mm
knuckle diameter: 18 mm
nota bene NO 62.63
without torsion spring; both sides
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
In case only one torsion spring is required NO 62.74 can be combined with the spring hinges NO 62.72 and NO 62.73 .
measurements: 80 x 100 mm
knuckle diameter: 18 mm
door hinge NO 62.74
for both installation sides overlying hinge
theft-proof mounting brackets enclosed on request
made of silver anodised or
synthetic-coated aluminium -
pin made of stainless steel
measurements: 80 x 100 mm
knuckle diameter: 18 mm
made of silver anodised or
synthetic-coated aluminium -
pin made of stainless steel
spring hinge NO 62.72
pluggable overlying hinge including adjustable
torsion spring | meant for closing doors
theft-proof mounting brackets enclosed on request
No 62.73 = meant for opening doors
In case only one torsion spring is required NO 62.71 can be combined with the spring hinges NO 62.69 and NO 62.70 .
frame wing: 27 x 100 mm
door wing: 40 x 100 mm
knuckle diameter: 18 mm
made of silver anodised aluminium -
pin made of stainless steel
door hinge NO 62.71
pluggable overlying hinge for both installation sides
nota bene NO 62.70 meant for opening doors
frame wing: 27 x 100 mm
door wing: 40 x 100 mm
knuckle diameter: 18 mm
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
spring hinge NO 62.69
pluggable overlying hinge including adjustable
torsion spring | meant for closing doors
theft-proof mounting brackets enclosed on request
5
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
measurements: 150 x 100 mm
knuckle diameter: 20 mm
counterbore: 90°
door hinge NO 64.04A150x100/5
overlying three-part hinge
Indicate the required installation side, please.
made of brushed stainless steel
nota bene NO 64.05 meant for opening doors
measurements: 80 x 100 mm
knuckle diameter: 20 mm
made of brushed stainless steel
spring hinge NO 64.04
pluggable overlying hinge including adjustable
torsion spring for both installation sides |
meant for closing doors
measurements: 80 x 100 mm
knuckle diameter: 18 mm made of synthetic -
pin made of stainless steel
rising hinge NO 62.79
heavy-duty overlying hinge
theft-proof mounting brackets and
protective lids enclosed on request
6
door hinge NO 62.81
pluggable hinge for both installation sides
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
measurements: 43 x 100 mm
knuckle diameter: 18 mm
nota bene NO 64.11 spring hinge | opening doors nota bene NO 64.12 spring hinge | closing doors
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
door hinge NO 64.06
pluggable hinge for both installation sides
made of brushed stainless steel
measurements: 80 x 100 mm
knuckle diameter: 20 mm
7
door hinge NO 64.09
overlying two-part heavy-duty hinge
made of brushed stainless steel
Indicate the required installation side, please.
measurements: 90 x 90 mm
knuckle diameter: 16 mm
spring hinge NO 64.13
overlying hinge including adjustable
torsion spring for both installation sides|
meant for closing doors
made of brushed stainless steel measurements: 80 x 100 mm
knuckle diameter: 20 mm
nota bene NO 64.15
without torsion spring; both sides
spring hinge NO 64.14
pluggable overlying hinge including two adjustable
torsion springs for both installation sides |
meant for closing doors
made of brushed stainless steel measurements: 80 x 100 mm
knuckle diameter: 20 mm
In case only one torsion spring is required NO 64.06 can be combined with the spring hinges NO 64.04 and NO 64.05.
measurements: 55 x 100 mm
knuckle diameter: 18 mm
nota bene NO 64.31
without torsion spring; both sides
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
spring hinge NO 64.29
overlying hinge meant for closing doors
No 64.30 = meant for opening doors
measurements: 80 x 100 mm
knuckle diameter: 20 mm
door hinge NO 64.25
pluggable hinge for both installation sides |
ball bearing incorporated
made of brushed stainless steel
In case only one torsion spring is required NO 64.25 can be combined with the spring hinges NO 64.04 and NO 64.05 .
measurements: 27 x 100 mm
knuckle diameter: 10 mm
nota bene NO 64.35
without torsion spring; both sides
spring hinge NO 64.33
pluggable overlying hinge meant for closing doors
including adjustable torsion spring|
No 64.34 = meant for opening doors
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
In case only one torsion spring is required NO 64.35 can be combined with the spring hinges NO 64.33 and NO 64.34 .
8
spring hinge NO 64.26 (nursery hinge)
overlying hinge meant for closing doors
theft-proof mounting brackets enclosed on request
made of silver anodised aluminium -
pin made of stainless steel
Indicate the required installation side, please.
measurements: 55 x 100 mm
knuckle diameter: 18 mm
nota bene NO 64.27
without torsion spring
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
nota bene NO 64.65 meant for opening doors nota bene NO 64.66 without torsion spring
measurements: 80 x 100 mm
knuckle diameter: 20 mm
spring hinge NO 64.64
pluggable overlying hinge including two adjustable
torsion springs | meant for both installation sides
made of brushed stainless steel
door hinge NO 64.55
cranked overlying hinge for both installation sides |
meant for closing doors
made of brushed stainless steel
Indicate the required installation side, please.
measurements: 80 x 100 mm
knuckle diameter: 20 mm
9
nota bene NO 64.56 spring hinge | closing doors nota bene NO 64.57 spring hinge | opening doors
door supplies
Additional devices to complete and modify
door facilities. Lockings, handles, displays -
covering every angle with suitable solutions.
In addition to the range of door hinges,
SCHÄFER offers multiple extras to equip
doors thoroughly.
Along with locking displays cubicle locks
indicate the actual state of the cubicle:
Engaged or vacant.
Doors will know their limits: Use catches,
knobs and lock cases to restrain doors
standing open.
What kind of equipment do you need for your cabins?
We deliver many options to create a fully operative
system of devices and supplies. You can rely
on SCHÄFER fixtures always in operation from
installation to closure.
cubicle lock NO 30.06
for cubicle doors
made of synthetic-coated
aluminium
We enclose theft-proof mounting brackets on request.
11
cubicle lock NO 30.07
for cubicle doors
made of synthetic-coated
aluminium
We enclose theft-proof mounting brackets on request.
cubicle lock NO 30.08
for cubicle doors |
including locking display on the front side
for both installation sides
made of synthetic-coated
aluminium
We enclose theft-proof mounting brackets on request.
circle turn handle lock NO 30.13
made of synthetic-coated
aluminium
We enclose theft-proof mounting brackets on request.
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
length as required made of synthetic-coated
aluminium
central locking NO 30.25
cubicle lock NO 30.33
‘ knob lock ’
including square clasp
made of polyamide (synthetic)
We enclose theft-proof mounting brackets on request.
made of brushed
stainless steel
cubicle lock NO 30.15
12
Custom-built special designs on demand
lock case >> NO 30.42
variant examples
designs available:
3 >> No 30.42.14 | 4 >> No 30.42.16
3 4
made of silver anodised
aluminium
lock case >> NO 30.42
variant examples
designs available:
1 >> No 30.42.11 | 2 >> No 30.42.12
1 2
made of silver anodised
aluminium
deadbolt lock NO 30.42
for both installation sides|
two varieties available
lock width: variety A >> 1,5 mm variety B >> 4,5 mm
13
cubicle lock >> NO 30.46
variant examples
designs available:
5 >> 30.46.07 meant for same-level doors | long variety made of silver anodised aluminium or brushed stainless steel
5
cubicle lock NO 30.46
for cubicle doors
for both installation sides
We enclose theft-proof mounting brackets on request.
made of silver anodised
aluminium
1 2 cubicle lock >> NO 30.46
variant examples
designs available:
1 >> 30.46.01 meant for same-level doors -- 2 >> 30.46.04 meant for overlying doors
3 4
14
cubicle lock >> NO 30.46
variant examples
designs available:
3 >> 30.46.05 meant for lock cases along with doors swinging out -- 4 >> 30.46.06
meant for lock cases along with doors swinging in
We enclose theft-proof mounting brackets on request.
made of synthetic-coated
aluminium
ergonomic handle NO 60.11
for cubicle doors
We enclose theft-proof mounting brackets on request.
doorknob NO 60.77
including protective support made out of synthetic
made of brushed
stainless steel
We enclose theft-proof mounting brackets on request.
door bumper NO 60.06
bumper and protective support made out of synthetic
made of silver anodised or
synthetic-coated aluminium
length as required made of silver anodised
aluminium
central locking NO 30.47
15
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
We enclose theft-proof mounting brackets on request.
door bumper NO 62.08
bumper and protective support made out of synthetic
made of polyamide (synthetic)
.
NO 62.41 can be combined with cubicle lock NO 30.33 for cubicle doors.
jet black
traffic white
RAL 9005
RAL 9016
doorknob NO 62.41
for cubicle doors | including mounting brackets
We enclose theft-proof mounting brackets on request.
door bumper NO 61.11
bumper and protective support made out of synthetic
16
made of silver anodised or synthetic-coated aluminium
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
made of brushed stainless steel
door catch NO 80.47
long variety
rod diameter: 7 mm
rod made of stainless steel, bearings made of synthetic
door catch NO 80.17
short variety
rod diameter: 5 mm
17
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
rod made of stainless steel, bearings made of synthetic
Metal supports to build partitions in cabins
and cubicles. Available in various models and
heights including covering rosettes.
Always at your side in the field of partition
construction. Supporting walls and shields
with stainless and acid-proof pillars.
Constant blight occurs especially in wet
areas. But it still keeps a simple thing to
counteract the blight with the right choice of
materials.
Rely on quality. Durability ranks first. And
years since the first installation, feel free to
make use of our replacement service.
Your imagination is and will be our first plan. Inform
us about the design - we produce the suitable pillar.
The following pages contain an overview of the most
common partition support varieties and supplies.
Nevertheless we always comply with your very wishes.
wall supports
partition support NO 60.70
including floor mounting rosette and
height adjusting screw
made of brushed
stainless steel
nota bene NO 60.82
pillar diameter: 20 mm
pillar diameter: 16 mm
covering rosette
diameter: 49 mm
19
partition support NO 60.44
including floor mounting rosette and
height adjusting screw
made of silver anodised or
synthetic-coated aluminium -
covering rosette made of synthetic
pillar diameter: 20 mm
covering rosette
diameter: 52 mm
partition support NO 60.60
including floor mounting rosette and
height adjusting screw
made of stainless steel -
covering rosette made of synthetic
pillar diameter: 14 mm
covering rosette
diameter: 52 mm
U-shaped fixing
measurements: 50 x 40 x 2,5 mm
partition support NO 60.01
including floor mounting rosette and
height adjusting screw
made of stainless steel
pillar diameter: 14 mm
covering rosette
diameter: 52 mm
U-shaped fixing
measurements: 30 x 30 x 2,5 mm
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
pillar diameter: 14 mm
made of brushed
stainless steel
partition support NO 61.53
including floor mounting rosette and
height adjusting screw
pillar diameter: 18 x 2,5 mm
covering rosette
diameter: 54 mm
partition support NO 61.67
including welded stainless allen wrench screw and
height adjusting screw
made of synthetic
pillar diameter: 16 mm
covering rosette
diameter: 52 mm
partition support NO 61.56
including floor mounting rosette and
height adjusting screw
made of brushed
stainless steel
pillar diameter: 18 x 1,5 mm
covering rosette
diameter: 52 mm
partition support NO 61.74
including welded stainless allen wrench screw and
height adjusting screw
made of brushed
stainless steel
20
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
pillar diameter: 20 x 1,5 mm
covering rosette
diameter: 52 mm
partition support NO 64.20
including floor mounting rosette and
height adjusting screw
made of brushed
stainless steel
made of brushed
stainless steel
partition support NO 64.18
including floor mounting rosette and
height adjusting screw
pillar diameter: 20 x 1,5 mm
covering rosette
diameter: 52 mm
partition support NO 64.17
including floor mounting rosette and
height adjusting screw
made of brushed
stainless steel
pillar diameter: 20 x 1,5 mm
covering rosette
diameter: 52 mm
made of brushed
stainless steel
partition support NO 62.34
including floor mounting rosette and
height adjusting screw
pillar diameter: 14 mm
21
measurements: 35 x 45 x 35 mm
made of silver anodised or
synthetic-coated aluminium;
or synthetic
wall bracket NO 60.17
lessened risk of injury
measurements: 45 x 45 x 35 mm
wall bracket NO 60.78
lessened risk of injury
made of brushed
stainless steel
measurements: 100 x 60 x 35
mm
wall bracket NO 60.49
lessened risk of injury
made of synthetic-coated
aluminium
measurements: 80 x 60 x 40 mm
wall bracket NO 61.38
lessened risk of injury
including mounting plate
made of silver anodised or
synthetic-coated aluminium
22
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
covering rosette NO 64.07.01
for pillar diameters of 16 to 20 mm
made of aluminium or stainless steel (V2A)
different rosette diameters on request
diameter: 46 mm
height: 35 mm
made of synthetic
covering rosette NO 60.01.08
for pillar diameters of 14 to 20 mm
23
diameter: 50 mm
height: 12 mm
made of aluminium or stainless steel (V2A)
covering rosette NO 60.04.04
diameter: 52 mm
height: 50 mm
made of aluminium
covering rosette NO 60.57.01
for pillar diameters of 20 mm
diameter: 50 mm
height: ~ 60 mm
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
measurements: 90 x 60 mm
wall bracket NO 64.03
compatible with every wall type
made of silver anodised or
synthetic-coated aluminium
covering rosette NO 61.88.03
including welded allen wrench screw
DIN EN ISO 4017 (M10 x 60)
made of stainless steel thickness: 3 mm
nota bene NO 60.01.04 (M10 x 35) and NO 62.84.02 (M10 x 55) other screws on request
covering rosette NO 60.04.02
made of stainless steel
thickness: 3 mm
covering rosette NO 64.23.01
made of aluminium or stainless steel (V2A) diameter: 50 mm
height: 16 mm
24
S T A N D A R D C O L O U R S
jet black
traffic white
RAL 9005
RAL 9016
door hinges
No 61.54 rising hinge (Syn) p. 4
No 61.79 door hinge (AL) „
No 62.59 door hinge (AL) „
No 62.61 | No 62.63 spring hinge (AL) „
No 62.69 | No 62.70 spring hinge (AL) p. 5
No 62.71 door hinge (AL) „
No 62.72 spring hinge (AL) „
No 62.74 door hinge (AL) „
No 62.79 rising hinge (Syn) p. 6
No 62.81 door hinge (AL) „
No 64.04 | No 64.05 spring hinge (SS) „
No 64.04A150x100/5 door hinge (SS) „
No 64.06 door hinge (SS) p. 7
No 64.09 door hinge (SS) „
No 64.13 | No 64.15 spring hinge (SS) „
No 64.14 spring hinge (SS) „
No 64.25 door hinge (SS) p. 8
No 64.26 | No 64.27 spring hinge (AL) „
No 64.29 | No 64.31 spring hinge (AL) „
No 64.33 | No 64.35 spring hinge (AL) „
No 64.55 door hinge (SS) p. 9
No 64.64 | No 64.66 spring hinge (SS) „
door supplies
No 30.06 cubicle lock (AL) p. 11
No 30.07 cubicle lock (AL) „
overview
overview
door supplies ...
No 30.08 cubicle lock (AL) p. 11
No 30.13 circle turn handle lock (AL) „
No 30.15 cubicle lock (SS) p. 12
No 30.25 central locking (AL) „
No 30.33 cubicle lock (PA) „
No 30.42 deadbolt lock (AL) p. 13
No 30.42.11 | No 30.42.12 lock case (AL) „
No 30.42.14 | No 30.42.16 lock case (AL) „
No 30.46 cubicle lock (AL) p. 14
No 30.46.01 | No 30.46.04 cubicle lock (AL|SS) „
No 30.46.05 | No 30.46.06 cubicle lock (AL|SS) „
No 30.46.07 cubicle lock (AL|SS) „
No 30.47 central locking (AL) p. 15
No 60.06 door bumper (AL) „
No 60.11 ergonomic handle (AL) „
No 60.77 doorknob (SS) „
No 61.11 door bumper (AL) p. 16
No 62.08 door bumper (SS) „
No 62.41 doorknob (PA) „
No 80.17 door catch (SS) p. 17
No 80.47 door catch (SS) „
wall supports
No 60.01 partition support (SS) p. 19
No 60.44 partition support (AL) „
No 60.60 partition support (SS) „
wall supports ...
No 60.70 | No 60.82 partition support (SS) p. 19
61.53 partition support (SS) p. 20
61.56 partition support (SS) „
61.67 partition support (Syn) „
61.74 partition support (SS) „
No 62.34 partition support (SS) p. 21
No 64.17 partition support (SS) „
No 64.18 partition support (SS) „
No 64.20 partition support (SS) „
No 60.17 wall bracket (AL|Syn) p. 22
No 60.49 wall bracket (AL) „
No 60.78 wall bracket (SS) „
No 61.38 wall bracket (SS) „
No 60.01.08 covering rosette (Syn) p. 23
No No 60.04.04 covering rosette (AL|SS) „
No 60.57.01 covering rosette (AL) „
No 64.07.01 covering rosette (AL|SS) „
No 64.23.01 covering rosette (AL|SS) p. 24
No 60.04.02 covering rosette (SS) „
No 61.88.03 | No 60.01.04 | No 62.84.02 covering rosette (AL|SS) „
No 64.03 wall bracket (AL) „
overview
Schäfer Bädertechnik GmbH
Ringstraße 184
45219 ESSEN
G E R M A N Y
PO Box 100561
42570 HEILIGENHAUS
G E R M A N Y
phone + 49 (2054) 93 84 666
fax + 49 (2054) 93 84 667
www.baedertechnik.com