catalogue - inflex hydraulics-dubai

CATALOGUE

Assembly and Supply of:

• Hydraulic Hoses and Fittings

• Stainless steel corrugated hoses and fittings

• Stainless steel expansion bellows

• Steel tubes, tube fittings & tube clamps

• Suction discharge, Air & Chemical hoses etc.

• Pressure guages, dowty seals, ball valves, quick release couplings etc.

Inflex Hydraulic Engines & Machinery Spare Parts Trdg llcTel: 04 - 3394677Fax: 04 - 3394388Email: [email protected]

Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc

P.O.Box 392755, Dubai - UAE, Tel: 04 3394677, Fax: 04 3394388Email: [email protected], www.inflexhydraulics.comwww.stainlesssteelhosesdubai.com

STAINLESS STEEL EXPANSION BELLOW

Expansion control in pipelines, ducting and vessels which carry hot or cold fluids or which are exposed to the large variations in ambient temperature is a major problem confronting designers. As the metal temperature increases or decreases , the dimensional change due to thermal expansion or contraction will enduce excessive stresses in the piping , ducting or vessel and large forces will be transmitted to anchors and connected equipment. For controlling such stresses and bring them to allowable values for the materials used in piping, ducting, and vessels, several different methods are available , such as the use of pipebends and expansion loops. However the most modern designers prefer the use of metallic bellows expansion joints, because they require less space than bends and loops and because their inherent flexibility enables them to absorb movements in more than one direction , thereby permitting greater freedom in design. Furthermore , expansion joints prove to be more economical than other devices , so their use results in lower initial costs for piping and construction work, operating costs being reduced as well.

BELLOW ELEMENT.

The flexible element of an expansion joint, consisting of one or more convolutions obtained by the hydro-forming or mechanical forming according to the diameter of the shell of a material sutiable for the required specification. Bellows are welded to tube ends or flanges to constitute different models of expansion joint assemblies.

INNER SLEEVE.

A device which is also referred to as liner, telescopic sleeve etc, to avoid the head losses or turbulence and streamline the flow through bellows.It is required if the fluid flowing through the bellows is at very high velocity.

ENDS.

The ends of an expansion joint, which may be either equipped with flanges or suitably beveled for welding to adjacent equipment or piping etc.They are in compliance with applicable standards in force.Bellows offered by us are designed based on E.J.M.A guidelines and our stanadard range comprisesOf Bellows from 2inch to 72inch NB in single and multiply construction for different working temperatures , pressures and movements.The Cyclic life of a Bellow depends upon the extent to which It is stressed under optimum working Pressure, Temperature , Axial and Lateral deflection. To achieve a long life, a Bellow must be operated well within the maximum design parameters for both deflection and pressure.

AXIAL MOVEMENT.

The amount to motion parallel to the axis in a straight guided pipline.

LATERAL MOVEMENT.

A single plane deflection form the centre line of one end of the bellows but that end is keeping to remain parallel with the other end.

ANGULAR MOTION.

The ends are displaced at angle 0 to each other rather then remaining parallel.

TYPES OF EXPANSION JOINTS.

Some of the most common expansion joints being used for different applications are listed below.

AXIAL JOINTS.

This expansion joint is simply a bellows element with pipe ends or flanges connections.It is manufactured from Single and multiply elements. These bellows are suitable only for axial movements & also absorb limited lateral displacements. Tide Axial Expansion Joints also have one bellows except that their length is restrained tie rods.

UNIVERSAL EXPANSION JOINTS.

The universal expansion joint consists of two bellows separated by pipe section or spool. The primary purpose of this arrangement is to have a unit which will accept large amounts of lateral deflection. The amount of lateral deflection they can accept is a function of the amount of angulation.These joints have no restrains to resist pressure thrust like the axial. For given bellow element the amount of lateral deflection capability is increased or decreased by simply changing the length of the center spool.

Bellow expansion joints standard or custom designed are recommended for the following applications.

* Vacuum Steam * Petrochemical * Hot Water * Utilities * Solar * Environmental

Axil Movement

Lateral Movement

Angular Motion

Axil Joints

Universal Expansion Joints

Blocks

Now available with us

SAE O - RING FLANGE CLAMPS AND BLOCK FLANGES.

We stock common range of SAE O - ring split clamps and Block flange for Hydraulic Application.

* SAE O - ring clamps and Blocks are available in different range and size.

* SAE O - ring Split Clamps

3000 PSI (61 code)

6000 PSI (62 code)

Code 61 and Code 62 SAE O ring Flange Blocks with NPT thread.

Code 61 and Code 62 SAE O ring Flange Blocks to Weld Socket.

Code 61 and Code 62 SAE Flat face flange Blocks with NPT thread.

Code 61 and Code 62 SAE Flat face flange Blocks to Weld Socket.Any other configurations are available on request.

STAINLESS STEEL CORRUGATED FLEXIBLE HOSES. HOSE Stainless Steel Corrugated flexible hoses are offered from 6mm (1/4” ) to 300mm(12”).The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. BRAIDUnbraided corrugated hoses tend to elongate when pressurized above a certain level. To restrain this, an external layer of stainless steel wire braiding is provided on the hose. Braiding prevents longitudinal expansion of corrugated hose and thus increases the internal pressure strengthen of the hose many fold.Braiding is highly flexible and exactly follows the movements of the hose.To increase the pressure ratings further, two or even three layers of braiding are provided . Unless specified , braiding in high tensile stainless steel AISI 304 wire, will be supplied .

ASSEMBLIESStainless Steel hose assemblies are engineered to perfection in flexibility , strength and reliability. Hose assembly can be supplied with any types of end connections in various types of materials.The end connections are tig welded to hose.

ADVANTAGES OF FLEXIBLE METAL HOSES.

(-270 deg C to 700 deg C)

in the piping system.

dampens vibration and similar equipments.

difficult locations.

APPLICATIONS

HYDRAULICHOSES &

CONNECTORS

Uncontrolled distribution document

We reserve the right to make, without notice, changes to any drawing or data shown in this document because of technical development or other reason.Please note that all the shown compatibilities and conformities are geometrical ones, they do not necessarily imply performances compatibilites and conformities.

Catalogue

HYDRAULICHOSES &

CONNECTORS

Uncontrolled distribution document

We reserve the right to make, without notice, changes to any drawing or data shown in this document because of technical development or other reason.Please note that all the shown compatibilities and conformities are geometrical ones, they do not necessarily imply performances compatibilites and conformities.

Catalogue

Inflex Hydraulic Engines & Machinery Spare Parts Trdg llcTel: 04 - 3394677Fax: 04 - 3394388Email: [email protected]

Inflex Hydraulic Engines &Machinery Spare Parts Trdg llc.

P.O.Box 392755, Dubai - UAETel: 04 3394677, Fax: 04 3394388Email: info@inflexhydraulics.comwww.inflexhydraulics.comwww.stainlesssteelhosesdubai.com

2001

INDEX

1. HOSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. FERRULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. HOSE CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. ADAPTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. STEEL TUBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. OTHER PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page No.

1-10

11-1 2

13-27

28

29

30

31

32-36

HYDRAULIC HOSES 2001

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX

MM MM PSI BAR PSI BAR MM KG/MTR

03 3/16 5 4.8 12.7 12,000 827 3,000 207 89 0.210

04 1/4 6 6.3 15.9 11,000 758 2,750 190 102 0.300

05 5/16 8 7.9 17.5 10,000 690 2,500 172 114 0.350

06 3/8 10 9.5 19.8 9,000 620 2,250 155 127 0.430

08 1/2 12 12.7 23 8,000 552 2,000 138 178 0.530

10 5/8 16 15.9 26.2 6,000 414 1,500 103 203 0.620

12 3/4 20 19.1 30.2 5,000 345 1,250 86 241 0.760

16 1 25 25.4 38.1 4,000 276 1,000 69 305 1.130

20 1 1/4 32 31.8 46 2,500 172 625 43 419 1.420

24 1 1/2 40 38.1 52.4 2,000 138 500 34 508 1.770

32 2 50 50.8 66.7 1,500 103 375 26 635 2.460

Application : High pressure Hydraulic systems using mineral oils, glycols and acqueous oils

Construction : Tube - Oil resistant synthetic rubber

Reinforcement-1 high tensile steel braid

Cover - synthetic rubber with high abrasion ozone and weather resistance

Temperature range : - 40º C to +110º C

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


03 3/16 5 4.8 15.9 20,000 1,380 5,000 345 89 0.360

04 1/4 6 6.3 17.5 20,000 1,380 5,000 345 102 0.470

05 5/16 8 7.9 19.1 17,000 1,172 4,250 293 114 0.510

06 3/8 10 9.5 21.4 16,000 1,103 4,000 276 127 0.630

08 1/2 12 12.7 24.6 14,000 965 3,500 241 178 0.735

10 5/8 16 15.9 27.8 11,000 758 2,750 190 203 0.850

12 3/4 20 19.1 31.8 9,000 620 2,250 155 241 1.060

16 1 25 25.4 39.7 8,000 552 2,000 138 305 1.515

20 1 1/4 32 31.8 50.8 6,500 448 1,625 112 419 2.350

24 1 1/2 40 38.1 57.2 5,000 345 1,250 86 508 2.700

32 2 50 50.8 69.8 4,500 310 1,125 78 635 3.345Application : High pressure Hydraulic systems using mineral oils, glycols and acqueous emulsion oils





HYDRAULIC HOSES

SAE 100R1AT-HOSECODE

SAE 100R2AT-HOSE

HR1T

HR2T

HOSE

NOM SIZE

MIN ACTUAL

BURST PRESSURE

CODE NOM SIZE

DN

MIN ACTUAL

BURST PRESSURE

HOSE

DN

WORKING

PRESSURE

WORKING

PRESSURE

1

1

HYDRAULIC HOSES

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX

MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR

03 3/16 5 4.8 12 16,665 1,150 14,500 1000 3,625 250 90 0.190

04 1/4 6 6.3 14 14,500 1,000 13,050 900 3,260 225 100 0.240

05 5/16 8 8.0 15 13,050 900 12,325 850 3,120 215 115 0.280

06 3/8 10 9.5 17.5 11,600 800 10,440 720 2,610 180 130 0.360

08 1/2 12 12.7 21 9,860 680 9,280 640 2,320 160 180 0.450

10 5/8 16 16.0 24 8,700 600 7,540 520 1,885 130 200 0.510

12 3/4 20 19.0 28 7,250 500 6,090 420 1,525 105 240 0.650

16 1 25 25.4 36 5,220 360 5,075 350 1,275 88 300 0.960

20 1 1/4 32 31.8 43.5 5,075 350 3,625 250 915 63 420 1.250

24 1 1/2 40 38.1 50 4,060 280 2,900 200 725 50 500 1.600

32 2 50 50.8 63.5 3,625 250 2,320 160 580 40 630 2.200Application : High pressure hydraulic systems using mineral oils, glycols and acqueous emulsion oils.



Cover - synthetic rubber with high abrasion, ozone and weather resistance


Special Characteristic : The impulse performance is higher than DIN-SAE specs., allowing improved and long lasting operating performances with good flexibility.

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


03 3/16 5 4.8 13.7 29,000 2,000 23,925 1650 6,020 415 90 0.320

04 1/4 6 6.3 15.5 25,375 1,750 23,200 1600 5,800 400 100 0.370

05 5/16 8 8.0 16.5 21,460 1,480 20,300 1400 5,075 350 115 0.412

06 3/8 10 9.5 19.5 20,300 1,400 19,140 1320 4,785 330 130 0.530

08 1/2 12 12.7 22.5 16,965 1,170 15,950 1100 3,990 275 180 0.640

10 5/8 16 16.0 25.5 14,790 1,020 14,500 1000 3,625 250 200 0.770

12 3/4 20 19.0 29.5 13,050 900 12,325 850 3,120 215 240 0.960

16 1 25 25.4 38 9,715 670 9,425 650 2,390 165 300 1.350

20 1 1/4 32 31.8 48 8,700 600 7,250 500 1,815 125 420 2.050

24 1 1/2 40 38.1 55 7,250 500 5,220 360 1,305 90 500 2.511

32 2 50 50.8 67 6,090 420 4,640 320 1,160 80 630 3.160

Application : High pressure Hydraulic systems using mineral oils glycols and acqueous oils





Special Characteristic : The impulse performance is higher than DIN-SAE spec., allowing improved and long lasting operating

performance with good flexibility

HYDRAULIC HOSES

WORKING

PRESSURE

SPEC BURST

PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSURE

SAE 100R1AT-DIN20022 1SN

HOSE

SAE 100R2AT-DIN20022 2SN

HOSE CODE

HR1T

HR2T

HOSE

HOSE

NOM SIZE

DN

MIN ACTUAL

BURST PRESSURE

CODENOM SIZE

DN

MIN ACTUAL

BURST PRESSURE

2

2001


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


03 3/16 04 4.8 13.2 14,500 1,000 12,000 827 3,000 207 76 0.210

04 1/4 05 6.3 15.0 13,340 920 12,000 827 3,000 207 86 0.265

05 5/16 06 8.0 17.0 11,600 800 9,000 621 2,250 155 102 0.335

07 13/32 07 10.5 19.5 10,875 750 8,000 552 2,000 138 117 0.390

08 1/2 08 12.7 23.5 8,265 570 7,000 483 1,750 121 140 0.525

10 5/8 10 16.0 27.5 7,250 500 6,000 414 1,500 103 165 0.650

14 7/8 16 22.0 31.5 4,785 330 3,200 221 800 55 183 0.660

18 1 1/8 20 28.0 38.0 5,220 360 2,500 172 625 43 229 0.910

22 1 3/8 24 35.0 44.5 4,640 320 2,000 138 500 34 267 1.000

29 1 13/16 32 46.0 56.4 3,625 250 1,400 97 350 24 337 1.480Application : High pressure Hydraulic systems using mineral oils, glycols and acqueous emulsion oils


Reinforcement-1 textile braid, 1 steel braid

Cover - a textile braid embedded with synthetic rubber


Special Characteristic : The hose conforms to SAE 100R5 spec. and the construction makes the hose particularly suitable for tough operating conditions.

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX

MM MM PSI PSI BAR SI PSI BAR PSI MM KG/MTR

04 1/4 4 6.3 12.5 1,600 110 400 28 64 0.150

05 5/16 5 8.0 14.0 1,600 110 400 28 76 0.165

06 3/8 6 9.5 16.0 1,600 110 400 28 76 0.200

08 1/2 8 12.7 19.8 1,600 110 400 28 102 0.260

10 5/8 10 16.0 23.0 1,400 97 350 24 127 0.320

12 3/4 12 19.0 26.0 1,400 97 350 24 140 0.380

16 1 16 25.4 32.0 1,400 97 350 24 152 0.465

Application : Low pressure hydraulic systems using mineral oils, glycols and acqueous emulsion oils.


Reinforcement-1 high tensile textile braid



Special Characteristic : The hose conforms to SAE 100R6, the special reinforcement used makes the hose particularly reliable when operating at high pressure

and high temperature.

HYDRAULIC HOSES

SPEC BURST

PRESSURE

WORKING

PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSUREDASH

NOM SIZE

HOSE

NOM SIZE

DASH

SAE 100R5 - HOSE

SAE 100R6-HOSECODE

HR5

HR6

HOSE MIN ACTUAL

BURST PRESSURECODE

3


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


03 3/16 03 4.8 9.7 12,000 827 3,000 207 20 0.065

04 1/4 04 6.3 12.1 11,000 758 2,750 190 32 0.098

05 5/16 05 8.0 14.0 10,000 689 2,500 172 45 0.118

06 3/8 06 9.5 16.1 9,000 620 2,250 155 51 0.144

08 1/2 08 12.7 19.4 8,000 552 2,000 138 77 0.211

12 3/4 12 19.0 27 5,000 345 1,250 86 127 0.259

(Twin hoses also available)

Construction : Core - superpolyamide

Reinforcement-1 synthetic fibre braid

Cover - polyurethane


Special Characteristic : Small outside diameter, wide fluid compatibility and lightweight.

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX

MM MM PSI PSI BAR SI PSI BAR PSI MM KG/MTR

04 1/4 04 6.3 15.8 20,000 1,379 5,000 345 51 0.176

06 3/8 06 9.5 19.35 16,000 1,103 4,000 276 64 0.220

08 1/2 08 12.7 22.5 14,000 965 3,500 241 102 0.283

Construction : Core - superpolyamide

Reinforcement-2 synthetic fibre braids

Cover - polyurethane


Special Characteristic : Lightweight and compact, wide fluid compatibility

HYDRAULIC HOSES

WORKING

PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSURE

HOSE

HOSE

CODENOM SIZE DASH

SAE 100R7 - HOSE

SAE 100R8-HOSE

HR7

HR8

CODENOM SIZE

MIN ACTUAL

BURST PRESSURE

DASH

4


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


03 3/16 03 4.75 9.40 20,000 1,379 5,000 345 75 0.100

04 1/4 04 6.35 11.68 17,000 1,172 4,250 293 100 0.185

06 3/8 06 9.53 15.75 13,000 896 3,250 224 125 0.240

08 1/2 08 12.70 18.29 11,000 760 2,750 190 180 0.370

Construction : Core - polyester elastomer


Cover - polyester elastomer


Special Characteristic : The polyester elastomer core and cover gives excellent resistance to almost all paint solvents

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


04 1/4 04 6.35 13.72 26,000 1,792 6,500 448 100 0.300

06 3/8 06 9.53 17.02 20,000 1,380 5,000 345 125 0.450

08 1/2 08 12.70 21.21 16,000 1,104 4,000 276 180 0.610

Construction : Core - polyester elastomer

Reinforcement- 2 high tensile steel braids

Cover - polyester elastomer


Special Characteristic : The polyester elastomer core and cover gives excellent resistance to almost all paint solvents

HYDRAULIC HOSES

WORKING

PRESSURE

SINGLE WIRE BRAID

THERMOPLASTIC HOSE

HTP1

HOSE

DOUBLE WIRE BRAID

THERMOPLASTIC HOSE

HOSE

CODE

WORKING

PRESSURENOM SIZE

DASH

CODE

MIN ACTUAL

BURST PRESSURE

MIN ACTUAL

BURST PRESSURENOM SIZE

DASH

5

HTP2


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


04 1/4 6 6.3 17.8 34,800 2,400 26,100 1,800 6,525 450 150 0.620

06 3/8 10 9.5 21.4 30,450 2,100 25,810 1,780 6,450 445 180 0.770

08 1/2 12 12.7 24.6 27,550 1,900 24,070 1,660 6,020 415 230 0.920

10 5/8 16 16.0 28.5 23,200 1,600 20,300 1,400 5,075 350 250 1.120

12 3/4 20 19.0 32.0 23,000 1,600 20,300 1,400 5,075 350 300 1.560

16 1 25 25.4 39.7 21,750 1,500 16,240 1,120 4,060 280 340 2.060

20 1 1/4 32 31.8 50.8 18,125 1,250 12,180 840 3,045 210 457 3.310

24 1 1/2 40 38.1 57.0 14,500 1,000 10,730 740 2,685 185 559 3.810

32 2 50 50.8 70.6 14,500 1,000 9,570 660 2,395 165 660 5.350

Application : Very high pressure hydraulic systems using hydraulic oils


Reinforcement-4 high tensile steel spirals

Cover - synthetic rubber with high temperature, ozone and abrasion resistance


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


16 1 25 25.4 39.2 23,925 1,650 20,000 1,379 5,000 345 305 2.280

20 1 1/4 32 32.0 49.8 21,025 1,450 20,000 1,379 5,000 345 419 3.710

24 1 1/2 40 38.0 57.3 21,750 1,500 20,000 1,379 5,000 345 508 4.960

32 2 50 50.8 71.0 20,300 1,400 20,000 1,379 5,000 345 635 7.360



Reinforcement-4 high tensile steel spirals upto 1" bore, and six spirals from 1 1/4" bore and above



HYDRAULIC HOSES

SAE 100R9R - DIN 20023 4SP HOSE

HR9R

HR13

HOSE

SAE 100R13 HOSE HOSE

CODE

CODENOM SIZE

DN

SPEC BURST

PRESSURE

MIN ACTUAL

BURST PRESSURENOM SIZE

DN

MIN ACTUAL

BURST PRESSURE

WORKING

PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSURE

6


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


16 1 25 25.4 38.0 25,375 1,750 22,040 1,520 5,510 380 340 2.080

20 1 1/4 32 31.8 45.2 20,300 1,400 18,850 1,300 4,715 325 460 2.510

24 1 1/2 40 38.1 53.5 17,400 1,200 16,820 1,160 4,205 290 560 3.420

32 2 50 50.8 68.0 15,950 1,110 14,500 1,000 3,625 250 700 4.730






MIN ACTUAL

BURST PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSURE

DIN 20023 4SH HOSE

H4SH

HOSE

CODENOM SIZE DN

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


04 1/4 6 6.35 17.80 36,250 2,500 14,500 1,000 150 0.60

06 3/8 10 9.50 23.80 36,250 2,500 14,500 1,000 200 1.14

08 1/2 12 12.70 23.10 36,250 2,500 14,500 1,000 240 1.34

12 3/4 20 19.05 32.20 36,250 2,500 14,500 1,000 305 2.51

Construction : Tube - water and Oil resistant synthetic rubber



Temperature range : -40º C to +100º C

HYDRAULIC HOSES

PRESSURE

WORKING

PRESSURECODENOM SIZE

WATER BLAST HOSE

DN

HOSE SPEC BURST

HRWB

7


HOSES

MAX. WORKING MIN BEND WEIGHT

PRESSURE AT 20 C PRESSURE AT 20 C RADIUS APPROX

in mm MIN MAX PSI MIN MAX PSI BAR PSI BAR MM KG/MTR

02 1/8 3.5 3.4 3.70 5.9 6.3 4,205 290 12,615 870 22 0.065

03 3/16 4.5 4.4 4.75 6.9 7.3 3,845 265 11,530 795 40 0.080

04 1/4 6.3 6.0 6.50 8.3 8.7 3,480 240 10,440 720 60 0.093

05 5/16 8.0 7.5 8.00 9.8 10.3 2,900 200 8,700 600 70 0.110

06 3/8 9.5 9.1 9.60 11.5 12.0 2,755 190 8,265 570 80 0.124

08 1/2 12.7 11.9 12.80 14.5 15.4 2,175 150 6,525 450 110 0.207

10 5/8 16.0 15.0 16.00 17.8 18.9 1,595 110 4,785 330 150 0.255

12 3/4 19.0 18.0 19.20 21.0 22.3 1,160 80 3,480 240 200 0.315

16 1 25.4 24.0 25.40 27.6 28.7 800 55 2,400 165 300 0.430

Construction The hose has a smooth innercore of extruded white Teflon with a single 304 stainless steel wire braid reinforcement

Temperature range -54º C to +232º C for continuous service

-73º C to +260º C for intermittent service

HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


06 3/8 10 9.5 20.0 23,200 1,600 16,000 1,103 4,000 276 127 0.620

08 1/2 12 12.7 23.8 19,575 1,350 16,000 1,103 4,000 276 178 0.800

12 3/4 20 19.0 30.7 20,300 1,400 16,000 1,103 4,000 276 241 1.220

16 1 25 25.4 38.0 21,025 1,450 16,000 1,103 4,000 276 305 2.050

20 1 1/4 32 31.8 47.0 17,400 1,200 12,000 827 3,000 207 419 2.8100

24 1 1/2 40 38.1 53.5 11,600 800 10,000 690 2,500 172 508 3.320

32 2 50 50.8 66.7 11,600 800 10,000 690 2,500 172 635 4.620






Special Characteristic : The hose exceeds SAE 100R12 spec., particularly on the impulse and burst pressures.

HYDRAULIC HOSES

BORE SIZE iNTERNAL DIA

HOSE

OUTSIDE DIA

MM MMCODE

HSST

SAE 100 R12 HOSECODE

HR12

NOM SIZE

DN

MIN ACTUAL

BURST PRESSURE

MIN BURST

SPEC BURST

PRESSURE

WORKING

PRESSURE

P.T.F.E hose has outstanding properties which are unmatched by any other flexible hose. It is possible to greatly reduce (or completely eliminate) maintenance and replacement costs which occur with conventional hoses used in extremely adverse conditions on various industrial applications. Within its working temperature range P. T.F.E. is completely inert to most known chemicals including alcohols, ehtylene glycol, concentrated acids, oils and fuels. P.T.F.E. hose has been tested and recommended for such aggressive acids, gases and solvents as nitrogen, hydrogen, ammonia, freons, butane, propane, chlorine, benzene, toluene, xylene, carbon tetrachloride, trichlorethylene, esters, ketones, hot fuming nitric, sulphuric and hydrochloric acid, concenrated sodium hydroxide, ammonia hydroxide and steam. Exceptions are few and comprise molten alkali metals and elementary flourine at elevated temperatures and pressures. P.T.F.E. will not cause contamination and can be handled with complete safety within its working temperature li mits.

8

STAINLESS STEELTEFLON HOSE


HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


04 1/4 6 6.3 16.0 14,500 1,000 13,050 900 3,335 230 100 0.320

05 5/16 8 8.0 17.5 12,835 885 12,325 850 3,045 210 114 0.345

06 3/8 10 9.5 20.0 11,385 785 10,440 720 3,045 210 127 0.445

08 1/2 12 12.7 21.0 9,860 680 9,280 640 2,320 160 178 0.540





HOSES

MIN BEND WEIGHT

ID OD RADIUS APPROX


05 5/16 8 8.0 19.0 21,315 1,470 20,300 1400 5,800 400 114 0.510

06 3/8 10 9.5 21.5 19,575 1,350 19,140 1320 5,800 400 127 0.630

08 1/2 12 12.7 24.5 16,675 1,150 15,950 1100 4,060 280 178 0.775





HYDRAULIC HOSES

BURST PRESSURE

SPEC BURST

PRESSURE

WORKING

PRESSURENOM SIZE

DASH

MIN ACTUAL SPEC BURST

PRESSUREBURST PRESSURE

WORKING

PRESSURE

MIN ACTUAL

SINGLE WIRE BRAID JETWASH

HOSE

R1A-SH

R2A-SH

HOSE

DOUBLE WIRE BRAID JETWASH

HOSE

HOSE

CODENOM SIZE

DIN

CODE

9

HOSES

WEIGHT

STATIC FLEXING PRESSURE AT 20º C APPROX

MM IN MM IN PSI MM MM BAR PSI BAR PSI KG/MTR

MIN BURSTMAX. WORKING

PRESSURE AT 20º C

MIN BEND RADIUS

DIAMETERCODE

NOMINAL ID MAX HOSE OD

HSPF2

04

06

08

10

12

16

20

24

32

40

48

64

80

96

128

160

192

6.2

10.3

12.2

16.2

20.2

25.4

34.3

40.1

50.3

65.7

80.3

100.8

125.4

150.8

197

250.4

300.2

1/4

3/8

1/2

5/8

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

5

6

8

10

12

25

38

45

58

70

85

105

130

160

180

200

290

325

380

500

620

725

85

140

140

160

170

190

260

300

320

410

450

560

710

815

1015

1270

1525


HOSES

WEIGHT

STATIC FLEXING PRESSURE AT 20º C APPROX

MM IN MM IN PSI MM MM BAR PSI BAR PSI KG/MTR

HYDRAULIC HOSES

MIN BURSTMAX. WORKING

PRESSURE AT 20º C

MIN BEND RADIUS

DIAMETERCODE

NOMINAL ID MAX HOSE OD

SINGLE WIRE BRAID STAINLESS

STEEL CONVOLUTED

HOSE

HSPF1

10

04

06

08

10

12

16

20

24

32

40

48

64

80

96

128

160

192

6.2

10.3

12.2

16.2

20.2

25.4

34.3

40.1

50.3

65.7

80.3

100.8

125.4

150.8

197

250.4

300.2

1/4

3/8

1/2

5/8

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

5

6

8

10

12

11

15.5

18

23

28

33.5

42.5

51

62

83

97

119

152.5

178

228

282

340

0.433

0.610

0.709

0.906

1.102

1.319

1.673

2.008

2.441

3.268

3.819

4.685

6.004

7.008

8.976

11.102

13.386

25

38

45

58

70

85

105

130

160

180

200

290

325

380

500

620

725

85

140

140

160

170

190

260

300

320

410

450

560

710

815

1015

1270

1525

120

85

75

80

64

50

40

35

30

24

18

16

14

10

8

7.5

6

1740

1233

1088

1160

928

725

580

508

435

348

261

232

203

145

116

109

87

480

340

300

320

256

200

160

140

120

96

48

64

56

40

32

30

24

6960

4930

4350

4640

3712

2900

2320

2030

1740

1392

1044

928

812

580

464

435

348

0.153

0.190

0.208

0.370

0.502

0.620

0.902

1.170

1.555

2.010

2.125

2.889

4.880

5.875

9.267

14.700

21.850

DOUBLE WIRE BRAID STAINLESS

STEEL CONVOLUTED

HOSE

11.5

16.25

18.5

24

29.25

34.6

43.9

52.3

63.5

84.2

98.2

121

154.6

180

230.5

283.6

341.6

0.453

0.640

0.728

0.945

1.152

1.362

1.728

2.059

2.500

3.315

3.866

4.764

6.087

7.087

9.075

11.165

13.449

192

136

120

128

103

80

64

56

48

39

29

26

23

16

13

12

9.6

2784

1972

1740

1856

1494

1160

928

812

696

566

421

377

334

232

189

174

139

768

544

480

512

412

320

256

224

192

156

116

104

92

64

52

48

38.4

11136

7888

6960

7424

5976

4640

3712

3248

2784

2264

1684

1508

1336

928

756

696

557

0.24

0.286

0.32

0.584

0.732

0.9

1.278

1.7

2.24

2.98

3.18

4.355

7.165

8.48

13.486

21.94

33.5

HOSE CONNECTORS 2001

FERRULES

Hose I.D. Dimensions(mm)

DN mm SIZE Inch D L

O3 5 4.8 03 3/16" 19 26

O4 6 6.3 04 1/4" 20 30.5

O5 8 7.9 05 5/16" 22 30.5

O6 10 9.5 06 3/8" 24 31.5

O8 12 12.7 08 1/2" 28.5 34

10 16 15.9 10 5/8" 32 37

12 20 19.1 12 3/4" 36 42.5

16 25 25.4 16 1" 43 50

20 32 31.8 20 1 1/4" 53 59


DN mm SIZE Inch D L

HSN2 O4 6 6.3 04 1/4" 22 30.5

O5 8 7.9 05 5/16" 24 30.5

O6 10 9.5 06 3/8" 25.5 31.5

O8 12 12.7 08 1/2" 30 34

10 16 15.9 10 5/8" 34 37

12 20 19.1 12 3/4" 38 42.5

16 25 25.4 16 1" 46 50


DN mm SIZE Inch D L

HSP1 O3 5 4.8 03 3/16" 14 27

O4 6 6.3 04 1/4" 17 29

O5 8 7.9 05 5/16" 19 30

O6 10 9.5 06 3/8" 21 31

O8 12 12.7 08 1/2" 25.5 34

10 16 15.9 10 5/8" 28.5 36

12 20 19.1 12 3/4" 32 42

16 25 25.4 16 1" 40 50

HOSE CONNECTORS

1 WIRE FERRULES CODE

HSN1

2 WIRE FERRULES CODE

R7 FERRULES CODE

11



DN mm SIZE Inch D L

O4 6 6.3 04 1/4" 22 30

O6 10 9.5 06 3/8" 25.5 33.5

O8 12 12.7 08 1/2" 30 37

10 16 15.9 10 5/8" 34 40

12 20 19.1 12 3/4" 38 43

16 25 25.4 16 1" 46 60

20 32 31.8 20 1 1/4" 56 66

24 40 38.1 24 1 1/2" 65 76.5

32 50 50.8 32 2" 80 80


DN mm SIZE Inch D L

16 25 25.4 16 1" 46 75

20 32 31.8 20 1 1/4" 60 88

24 40 38.1 24 1 1/2" 67 94

32 50 50.8 32 2" 84.5 99

HOSE CONNECTORS

HEH

HMS

CODE4 WIRE FERRULES

6 WIRE EXTRA HIGH PRESSURE FERRULES

CODE

12


HA10 B.S.P. MALE PARALLEL - 6 0° CONE SEAT

Hose I.D. Thread Dimensions(mm)

DN mm SIZE Inch F H L S

O4 6 6.30 04 1/4" 1/4"-19 26.0 54.5 19

O6 10 9.50 06 3/8" 3/8"-19 28.5 59.0 22

O8 12 12.70 08 1/2" 1/2"-14 33.0 66.0 27

10 16 15.90 10 5/8" 5/8"-14 35.0 71.0 30

12 20 19.10 12 3/4" 3/4"-14 39.0 80.0 32

16 25 25.40 16 1" 1"-11 43.5 98.5 41

20 32 31.80 20 1 1/4" 1 1/4"-11 47.0 108.0 50

24 40 38.10 24 1 1/2" 1 1/2"-11 51.0 121.5 55

32 50 50.80 32 2" 2"-11 53.5 129.5 70

HA22 B.S.P. TAPER MALE - 6 0° CONE SEAT



O4 6 6.3 04 1/4" 1/4"-19 26.7 55.2 15

O6 10 9.5 06 3/8" 3/8"-19 27.8 58.3 19

O8 12 12.7 08 1/2" 1/2"-14 34.5 67.5 22

12 20 19.1 12 3/4" 3/4"-14 37.2 78.2 27

16 25 25.4 16 1" 1"-11 44.0 99.0 36

20 32 31.8 20 1 1/4" 1 1/4"-11 48.1 109.1 46

24 40 38.1 24 1 1/2" 1 1/2"-11 49.9 120.4 50

32 50 50.8 32 2" 2"-11 55.2 131.2 65

HA17 B.S.P. FEMALE - 60° CONE


DN mm SIZE Inch F H L G S

O4 6 6.3 04 1/4" 1/4"-19 18.7 47.2 4.1 19

O6 10 9.5 06 3/8" 3/8"-19 19.7 50.2 5.8 22

O8 12 12.7 08 1/2" 1/2"-14 22.7 55.7 6.5 27

10 16 15.9 10 5/8" 5/8"-14 22.7 58.7 9.3 30

12 20 19.1 12 3/4" 3/4"-14 26.1 67.1 8.6 32

16 25 25.4 16 1" 1"-11 29.8 84.8 10.5 41

20 32 31.8 20 1 1/4" 1 1/4"-11 32.9 93.9 10.0 50

24 40 38.1 24 1 1/2" 1 1/2"-11 36.0 12.0 55

32 50 50.8 32 2" 2"-11 37.0

106.5

113.0 16.0 70

HOSE CONNECTORS

BSP FEMALE STANDARD CODE

CODE

CODE

BSP MALE PARALLEL

BSPT MALE

13


HB1790° B.S.P. COMPACT ELBOW - 6 0° CONE

SOLID - CRIMPED NUT


DN mm SIZE Inch F H L K G S S1

O4 6 6.3 04 1/4" 1/4"-19 18.5 47.0 22.0 4.1 19.0 14.0

O6 10 9.5 06 3/8" 3/8"-19 20.0 50.5 24.5 5.8 22.0 17.0

O8 12 12.7 08 1/2" 1/2"-14 24.0 57.0 29.0 6.5 27.0 22.0

HG17 B.S.P. 90° SWEPT ELBOW - 60° CONE - SOLID


DN mm SIZE Inch F H L K G S

O4 6 6.3 04 1/4" 1/4"-19 24.0 52.0 28.0 4.1 19.0

O6 10 9.5 06 3/8" 3/8"-19 34.0 64.0 36.5 5.8 22.0

O8 12 12.7 08 1/2" 1/2"-14 41.0 74.0 44.0 6.5 27.0

10 16 15.9 10 5/8" 5/8"-14 49.0 85.0 50.5 9.3 30.0

12 20 19.1 12 3/4" 3/4"-14 58.0 99.0 60.5 8.6 32.0

16 25 25.4 16 1" 1"-11 74.0 129.0 72.5 10.5 41.0

20 32 31.8 20 1 1/4" 1 1/4"-11 72.0 153.0 89.0 10.0 50.0

24 40 38.1 24 1 1/2" 1 1/2"-11 108.0 179.0 101.5 12.0 55.0

32 50 50.8 32 2" 2"-11 142.0 218.0 217.5 16.0 70.0

HJ17 B.S.P. 45° SWEPT ELBOW - 60° CONE - SOLID


DN mm SIZE Inch F H L K G S S1

O4 6 6.3 04 1/4" 1/4"-19 40.0 68.5 16.5 4.1 19.0

O6 10 9.5 06 3/8" 3/8"-19 53.5 84.0 19.5 5.8 22.0

O8 12 12.7 08 1/2" 1/2"-14 64.0 97.0 24.5 6.5 27.0

10 16 15.9 10 5/8" 5/8"-14 78.5 114.5 26.0 9.3 30.0

12 20 19.1 12 3/4" 3/4"-14 88.5 129.5 35.0 8.6 32.0

16 25 25.4 16 1" 1"-11 110.0 165.0 42.0 10.5 41.0

20 32 31.8 20 1 1/4" 1 1/4"-11 138.0 199.0 54.5 10.0 50.0

24 40 38.1 24 1 1/2" 1 1/2"-11 162.0 232.5 58.5 12.0 55.0

32 50 50.8 32 2" 2"-11 205.5 281.5 66.5 16.0 70.0

HOSE CONNECTORS

CODE

BSPF 45 DEG STANDARD

CODE

BSPF 90 DEG COMPACT

BSPF 90 DEG STANDARD

CODE

14


HA19B.S.P. FEMALE - FLAT FACE

PRESSED NUT


DN mm SIZE Inch F H L G S

O4 6 6.3 04 1/4" 1/4"-19 15.5 44 7 19

06 10 9.5 06 3/8" 3/8"-19 16.5 47 9 22

O8 12 12.7 08 1/2" 1/2"-14 19.2 52.2 10 27

10 16 15.9 10 5/8" 5/8"-14 20.5 56.5 11.5 30

12 20 19.1 12 3/4" 3/4"-14 22.7 63.7 12 32

16 25 25.4 16 1" 1"-11 26.3 81.3 14 41

HA34 N.P.T.F. MALE - 6 0° CONE SEAT



O4 6 6.3 04 1/4" 1/4"-18 26.5 55 15

O6 10 9.5 06 3/8" 3/8"-18 27.5 58 19

O8 12 12.7 08 1/2" 1/2"-14 34.5 67.5 22

12 20 19.1 12 3/4" 3/4"-14 37.2 78.2 27

16 25 25.4 16 1" 1"-11,5 43.5 98.5 36

20 32 31.8 20 1 1/4" 1 1/4"-11,5 46.1 107 46

24 40 38.1 24 1 1/2" 1 1/2"-11,5 54 112 53

32 50 50.8 32 2" 2"-11,5 57 130 65

HOSE CONNECTORS

CODE

BSPF FLAT FACE

NPT MALE STANDARD

CODE

15


HA38STRAIGHT SAE J518 FLANGE - 3000 PSI

SOLID


DN mm SIZE Inch H L A

O8 12 12.7 08 1/2" 1/2" 48.5 81.5 30.2

12 20 19.1 12 3/4" 3/4" 53.5 94.5 38.1

16 25 25.4 16 1" 1" 60.5 115.5 44.5

20 32 31.8 20 1 1/4" 1 1/4" 65.5 126.5 50.8

24 40 38.1 24 1 1/2" 1 1/2" 70.5 141.0 60.3

32 50 50.8 32 2" 2" 77.0 153.0 71.4

STRAIGHT KOMATSU FLANGE - SOLID

10 16 15.9 10 5/8" 5/8" 49.3 85.3 34

HG3890° SAE J518 FLANGE - 3000 PSI

SOLID


DN mm SIZE Inch H L K A

O8 12 12.7 08 1/2" 1/2" 41 74 42 30.2

12 20 19.1 12 3/4" 3/4" 58 99 57 38.1

16 25 25.4 16 1" 1" 74 129 69 44.5

20 32 31.8 20 1 1/4" 1 1/4" 92 153 87 50.8

24 40 38.1 24 1 1/2" 1 1/2" 108 179 101 60.3

32 50 50.8 32 2" 2" 142 218 134 71.4

90° KOMATSU FLANGE - SOLID

10 16 15.9 10 5/8" 5/8" 49 85 49 34

HOSE CONNECTORS

FLANGE

FLANGE

SAE FLANGE 3000 PSI 90 DEG STANDARD CODE

SAE FLANGE 3000PSI STANDARD

CODE

16


HJ38 SAE J518 SPLIT FLANGE HALF 3000 PSI



O8 12 12.7 08 1/2" 1/2" 62.0 95 22.5 30.2

12 20 19.1 12 3/4" 3/4" 86.5 128 33 38.1

16 25 25.4 16 1" 1" 107.5 163 39.5 44.5

20 32 31.8 20 1 1/4" 1 1/4" 136.5 198 53 50.8

24 40 38.1 24 1 1/2" 1 1/2" 162.0 233 58.5 60.3

32 50 50.8 32 2" 2" 210.5 287 71.5 71.4

HZF38SAE J518 SPLIT FLANGE HALF

3000 PSI

Dimensions(mm)

12

16

20

24

32

HOSE CONNECTORS

FLANGE

SPLIT FLANGE 3000PSI

CODE

CODE

17

SAE J518SPLIT FLANGEHALF 3000 PSI

08 54

65.10

69.80

79.40

93.70

101.60

23

26.10

29.40

36.50

41.30

48.40

38.10

47.60

52.40

58.70

69.80

77.80

9

11

11

12

13.50

13.50

8.70

11.10

13.10

15.10

17.80

21.40

EDCBA

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

FLANGE


HA39STRAIGHT SAE J518 FLANGE - 6000 PSI

ONE PIECE


DN mm SIZE Inch H L A

O8 12 12.7 08 1/2" 1/2" 49.5 82.5 31.7

12 20 19.1 12 3/4" 3/4" 60.0 101.0 41.3

16 25 25.4 16 1" 1" 66.5 121.5 47.6

20 32 31.8 20 1 1/4" 1 1/4" 71.0 132.0 54.0

24 40 38.1 24 1 1/2" 1 1/2" 81.0 151.5 63.5

32 50 50.8 32 2" 2" 100.0 176.0 79.4

HG3990° SAE J518 FLANGE - 6000 PSI

ONE PIECE



O8 12 12.7 08 1/2" 1/2" 41 74 42 31.7

12 20 19.1 12 3/4" 3/4" 58 99 62 41.3

16 25 25.4 16 1" 1" 74 129 75 47.6

20 32 31.8 20 1 1/4" 1 1/4" 92 153 90 54.0

24 40 38.1 24 1 1/2" 1 1/2" 108 179 102 63.5

32 50 50.8 32 2" 2" 142 218 137 79.4

HOSE CONNECTORS

FLANGE

FLANGE

SAE FLANGE 90 DEG 6000 PSI STANDARD CODE

SAE FLANGE 6000 PSI STANDARD

CODE

18


HJ3945° SAE J518 FLANGE - 6000 PSI

ONE PIECE



O8 12 12.7 08 1/2" 1/2" 63.0 96.0 23.5 31.7

12 20 19.1 12 3/4" 3/4" 89.5 130.5 36.0 41.3

16 25 25.4 16 1" 1" 112.0 167.0 44.0 47.6

20 32 31.8 20 1 1/4" 1 1/4" 138.5 200.0 55.0 54.0

24 40 38.1 24 1 1/2" 1 1/2" 162.5 233.0 58.5 63.5

12 20 19.1 12 3/4" 3/4" 89.5 130.5 36.0 41.3

32 50 50.8 32 2" 2" 212.5 289.0 73.5 79.4

HZF39SAE J518 SPLIT FLANGE HALF

6000 PSI

Dimensions(mm)

O8

12

16

20

24

32

HOSE CONNECTORS

FLANGE

SAE SPLIT FLANGE 6000 PSI

CODE

SAE FLANGE 6000 PSI 45 DEG STANDARD CODE

FLANGE

19

E

9.2

11.9

13.9

15.8

18.2

22.2

D

9

11

13

15

17

21

C

40.5

50.8

57.1

66.7

79.4

96.8

B

23.8

30.2

34.9

38.9

47.6

57.1

56.3

71.4

80.9

95.2

A

112.7

133.3

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"


HA50 J.I.C. MALE - 74° CONE



O4 6 6.30 04 1/4" 7/16"-20 26.5 55.0 12.0

O5 8 7.90 05 5/16" 1/2"-20 26.5 55.0 14.0

O6 10 9.50 06 3/8" 9/16"-18 26.5 57.0 15.0

O8 12 12.70 08 1/2" 3/4"-16 28.7 61.7 19.0

10 16 15.90 10 5/8" 7/8"-14 34.7 70.7 24.0

12 20 19.10 12 3/4" 1 1/16"-12 40.4 81.4 27.0

16 25 25.40 16 1" 1 5/16"-12 42.7 97.7 36.0

20 32 31.80 20 1 1/4" 1 5/8"-12 46.5 107.5 46.0

24 40 38.10 24 1 1/2" 1 7/8"-12 51.2 121.7 50.0

32 50 50.80 32 2" 2 1/2"-12 62.2 138.2 65.0

HA53 J.I.C. FEMALE - 74° CONE



O4 6 6.3 04 1/4" 7/16"-20 14.7 43.2 15.0

O5 8 7.9 05 5/16" 1/2"-20 16.0 44.5 17.0

O6 10 9.5 06 3/8" 9/16"-18 16.0 46.5 19.0

O8 12 12.7 08 1/2" 3/4"-16 20.0 53.0 24.0

10 16 15.9 10 5/8" 7/8"-14 21.5 57.5 27.0

12 20 19.1 12 3/4" 1 1/16"-12 24.0 65.0 32.0

16 25 25.4 16 1" 1 5/16"-12 26.0 81.0 41.0

20 32 31.8 20 1 1/4" 1 5/8"-12 27.8 88.8 50.0

24 40 38.1 2'4 1 1/2" 1 7/8"-12 31.5 102.0 55.0

32 50 50.8 32 2" 2 1/2"-12 33.5 109.5 70.0

HOSE CONNECTORS

CODE

JIC MALE STANDARD

JIC FEMALE STANDARD

CODE

20


HG53 J.I.C. 90° SWEPT ELBOW - 74° CONE SEATSOLID - PRESSED NUT


DN mm SIZE Inch F H L K S

O4 6 6.3 04 1/4" 7/16"-20 24 52 24 15

O5 8 7.9 05 5/16" 1/2"-20 31 59 29 17

O6 10 9.5 06 3/8" 9/16"-18 34 64 33 19

O8 12 12.7 08 1/2" 3/4"-16 41 74 41 24

10 16 15.9 10 5/8" 7/8"-14 49 85 49 27

12 20 19.1 12 3/4" 1 1/16"-12 58 99 59 32

16 25 25.4 16 1" 1 5/16"-12 74 129 72 41

20 32 31.8 20 1 1/4" 1 5/8"-12 92 153 87 50

24 40 38.1 2'4 1 1/2" 1 7/8"-12 108 179 100 55

32 50 50.8 32 2" 2 1/2"-12 142 218 126 70

HJ53 J.I.C. 45° SWEPT ELBOW - 74° CONE SEATSOLID - PRESSED NUT


DN mm SIZE Inch F H L K S

O4 6 6.3 04 1/4" 7/16"-20 37.0 66.0 13.5 15.0

O5 8 7.9 05 5/16" 1/2"-20 46.0 74.5 16.0 17.0

O6 10 9.5 06 3/8" 9/16"-18 51.0 81.0 17.0 19.0

O8 12 12.7 08 1/2" 3/4"-16 62.0 98.0 22.5 24.0

10 16 15.9 10 5/8" 7/8"-14 77.0 113.0 25.0 27.0

12 20 19.1 12 3/4" 1 1/16"-12 86.0 127.0 33.0 32.0

16 25 25.4 16 1" 1 5/16"-12 107.5 162.5 40.0 41.0

20 32 31.8 20 1 1/4" 1 5/8"-12 135.5 196.5 52.0 50.0

24 40 38.1 24 1 1/2" 1 7/8"-12 161.0 231.0 57.0 55.0

32 50 50.8 32 2" 2 1/2"-12 205.5 281.0 66.5 70.0

HOSE CONNECTORS

CODE

CODE

JIC FEMALE 90 DEG STANDARD

JIC FEMALE 45 DEG

21


HA65METRIC MALE - 24° CONE SEAT

LIGHT TYPE


DN mm SIZE Inch F H L E S

O4 6 6.30 04 1/4" M12x1,5 23 52 6 14

O4 6 6.30 04 1/4" M14x1,5 23 52 8 14

O5 8 7.90 05 5/16" M16x1,5 24 53 10 17

O6 10 9.50 06 3/8" M16x1,5 24 55 10 17

O6 10 9.50 06 3/8" M18x1,5 24 55 12 19

O8 12 12.70 08 1/2" M22x1,5 29 62 15 24

10 16 15.90 10 5/8" M26x1,5 29 65 18 27

12 20 19.10 12 3/4" M30x2 32 73 22 32

16 25 25.40 16 1" M36x2 33 88 28 36

20 32 31.80 20 1 1/4" M45x2 38 99 35 46

24 40 38.10 24 1 1/2" M52x2 41 111 42 55

HA68METRIC MALE - 24° CONE SEAT

HEAVY TYPE


DN mm SIZE Inch F H L E S

O4 6 6.3 04 1/4" M16x1,5 25 54 8 17

O4 6 6.3 04 1/4" M18x1,5 26 55 10 19

O6 10 9.5 06 3/8" M20x1,5 27 58 12 22

O6 10 9.5 06 3/8" M22X1,5 29 60 14 24

O8 12 12.7 08 1/2" M24x1,5 31 64 16 27

10 16 15.9 10 5/8" M30x2 33 69 20 32

12 20 19.1 12 3/4" M36x2 36 77 25 36

16 25 25.4 16 1" M42x2 41 96 30 46

20 32 31.8 20 1 1/4" M52x2 46 107 38 55

HOSE CONNECTORS

CODE

CODE

METRIC MALE (LIGHT)STANDARD

METRIC MALE (HEAVY)

STANDARD

22


HA67O'RING METRIC FEMALE - 24° CONE

LOOSE NUT - LIGHT TYPE

Hose I.D. Thread Tube Dimensions(mm)

DN mm SIZE Inch F mm H L S

O4 6 6.3 04 1/4" M12x1,5 6 23 52 17

O4 6 6.3 04 1/4" M14x1,5 8 24 53 17

O5 8 7.9 05 5/16" M16x1,5 10 25 54 19

O6 10 9.5 06 3/8" M16x1,5 10 25 56 19

O6 10 9.5 06 3/8" M18x1,5 12 25 56 22

O8 12 12.7 08 1/2" M22x1,5 15 27 60 27

10 16 15.9 10 5/8" M26x1,5 18 28 64 32

12 20 19.1 12 3/4" M30x2 22 31 72 36

16 25 25.4 16 1" M36x2 28 33 88 41

20 32 31.8 20 1 1/4" M45x2 35 37 98 50

24 40 38.1 24 1 1/2" M52x2 42 39 109 60

HA69O'RING METRIC FEMALE -24° CONE

LOOSE NUT - HEAVY TYPE


DN mm SIZE Inch F mm H L S

O4 6 6.3 04 1/4" M16x1,5 8 24 53 19

O4 6 6.3 04 1/4" M18x1,5 10 25 54 22

O6 10 9.5 06 3/8" M20x1,5 12 25 56 24

O6 10 9.5 06 3/8" M22x1,5 14 29 60 27

O8 12 12.7 08 1/2" M24x1,5 16 31 64 30

10 16 15.9 10 5/8" M30x2 20 35 71 36

12 20 19.1 12 3/4" M36x2 25 39 80 46

16 25 25.4 16 1" M42x2 30 41 96 50

20 32 31.8 20 1 1/4" M52x2 38 47 108 60

HOSE CONNECTORS

CODE

CODE

METRIC FEMALE (LIGHT) STANDARD

METRIC FEMALE (HEAVY) STANDARD

23


HG67 90° O-RING METRIC SWEPT ELBOW - 24° CONESOLID - LOOSE NUT - LIGHT TYPE


DN mm SIZE Inch F mm H L K S

4 6 6.3 04 1/4" M12x1,5 6 24 52 28 17

4 6 6.3 04 1/4" M14x1,5 8 24 52 28 17

6 10 9.5 06 3/8" M16x1,5 10 34 64 36 19

6 10 9.5 06 3/8" M18x1,5 12 34 64 35 22

8 12 12.7 08 1/2" M22x1,5 15 41 74 41 27

10 16 15.9 10 5/8" M26x1,5 18 49 85 49 32

12 20 19.1 12 3/4" M30x2 22 58 99 54 36

16 25 25.4 16 1" M36x2 28 74 129 68 41

20 32 31.8 20 1 1/4" M45x2 35 92 153 86 50

24 40 38.1 24 1 1/2" M52x2 42 108 179 96 60

HG69 90° O-RING METRIC SWEPT ELBOW - 24° CONESOLID - LOOSE NUT - HEAVY TYPE



O4 6 6.3 04 1/4" M16x1,5 8 24 52 28 19

O4 6 6.3 04 1/4" M18x1,5 10 24 52 30 22

O6 10 9.5 06 3/8" M20x1,5 12 34 64 35 24

O6 10 9.5 06 3/8" M22x1,5 14 34 64 37 27

O8 12 12.7 08 1/2" M24x1,5 16 41 74 42 30

10 16 15.9 10 5/8" M30x2 20 49 85 53 36

12 20 19.1 12 3/4" M36x2 25 58 99 59 41

16 25 25.4 16 1" M42x2 30 74 129 71 50

20 32 31.8 20 1 1/4" M52x2 38 92 153 86 60

HOSE CONNECTORS

CODE

CODE

METRIC FEMALE 90 DEG (LIGHT)STANDARD

METRIC FEMALE 90 DEG (HEAVY)STANDARD

24

HOSE CONNECTORS

HJ6745° O-RING METRIC SWEPT ELBOW - 24° CONE

SOLID - LOOSE NUT - LIGHT TYPE



O4 6 6.3 04 1/4" M12x1,5 6 43.0 71.5 19.0 17

O4 6 6.3 04 1/4" M14x1,5 8 39.5 68.0 16.0 17

O6 10 9.5 06 3/8" M16x1,5 10 58.0 88.0 23.5 19

O6 10 9.5 06 3/8" M18x1,5 12 53.0 83.5 19.0 22

O8 12 12.7 08 1/2" M22x1,5 15 62.0 95.0 22.5 27

10 16 15.9 10 5/8" M26x1,5 18 79.0 115.0 26.0 32

12 20 19.1 12 3/4" M30x2 22 87.0 127.5 31.0 36

16 25 25.4 16 1" M36x2 28 109.0 164.0 40.0 41

20 32 31.8 20 1 1/4" M45x2 35 137.5 198.5 53.0 50

24 40 38.1 24 1 1/2" M52x2 42 161.5 231.5 56.5 60

HJ6945° O-RING METRIC SWEPT ELBOW - 24° CONE

SOLID - LOOSE NUT - HEAVY TYPE



O4 6 6.3 04 1/4" M16x1,5 8 39.5 68.0 16.0 19.0

O4 6 6.3 04 1/4" M18x1,5 10 40.5 69.0 16.5 22.0

O6 10 9.5 06 3/8" M20x1,5 12 53.0 83.5 19.0 24.0

O6 10 9.5 06 3/8" M22x1,5 14 54.5 85.0 20.5 27.0

O8 12 12.7 08 1/2" M24x1,5 16 63.5 96.5 24.0 30.0

10 16 15.9 10 5/8" M30x2 20 81.5 117.5 28.0 36.0

12 20 19.1 12 3/4" M36x2 25 90.0 131.0 35.5 41.0

16 25 25.4 16 1" M42x2 30 110.0 165.0 41.5 50.0

20 32 31.8 20 1 1/4" M52x2 38 139.0 200.0 54.0 60.0

HOSE CONNECTORS

METRIC FEMALE (LIGHT ) 45 DEG

STANDARD TIEFFEPart. N°

METRIC FEMALE (HEAVY) 45 DEG

STANDARD CODE

25

2001


HA76 "KOMATSU" METRIC FEMALE - 60º CONE SEATPRESSED NUT

Hose I.D. Thread

DN mm SIZE Inch F

O4 6 6.3 04 1/4" M14x1,5

O6 10 9.5 06 3/8" M18x1,5

O8 12 12.7 08 1/2" M22X1,5

10 16 15.9 10 5/8" M24x1,5

12 20 19.1 12 3/4" M30x1,5

16 25 25.4 16 1" M33x15

20 32 31.8 20 1 1/4" M36x1,5

24 40 38.1 24 1 1/2" M42x1,5

HA83WASHCLEANER FEMALE

"FK" TYPE


DN mm SIZE Inch F H L D

O4 6 6.3 04 1/4" M22x1,5 31 59.5 14

O5 8 7.9 05 5/16" M22x1,5 31 59.5 14

O6 10 9.5 06 3/8" M22x1,5 31 61.5 14

HA92B.S.P. BANJO

SOLID

Hose I.D. BoltDimensions

(mm)

DN mm SIZE Inch Thread H L D S

O4 6 6.3 04 1/4" 1/4"-19 24.5 65.0 13.3 14.0

O6 10 9.5 06 3/8" 3/8"-19 26.5 71.0 16.9 17.0

O8 12 12.7 08 1/2" 1/2"-14 31.0 82.0 21.0 23.5

10 16 15.9 10 5/8" 5/8"-14 32.5 88.5 23.3 25.0

12 20 19.1 12 3/4" 3/4"-14 37.5 101.0 26.5 30.0

16 25 25.4 16 1" 1"-11 50.5 134.5 33.5 38.0

HOSE CONNECTORS

CODE

CODE

KOMATSU FEMALE STANDARD

K ARCHER FEMALE STANDARD

BSP BANJOCODE

26

D


HA93 METRIC BANJO - ONE PIECE

Hose I.D. BoltDimensions

(mm)

DN mm SIZE Inch Thread H L D S

O4 6 6.3 04 1/4" M14x1,5 24.5 65.0 14.1 14.0

O6 10 9.5 06 3/8" M16x1,5 25.5 71.0 16.1 16.0

O8 12 12.7 08 1/2" M18x1,5 31.5 80.5 18.1 20.0

10 16 15.9 10 5/8" M22x1,5 34.0 88.0 22.1 23.5

12 20 19.1 12 3/4" M30x1,5 43.5 111.5 30.1 36.0

HA96 DOUBLE INSERT


DN mm SIZE Inch H L

O4 6 6.3 04 1/4" 13 70

O5 8 7.9 05 5/16" 13 70

O6 10 9.5 06 3/8" 13 74

O8 12 12.7 08 1/2" 15 81

10 16 15.9 10 5/8" 15 87

12 20 19.1 12 3/4" 17 99

16 25 25.4 16 1" 20 130

HOSE CONNECTORS

CODE

CODE

METRIC BANJO

DOUBLE INSERT

27

D

ADAPTORS 2001

ADAPTORS

JIC MALE XJIC MALE

BSP MALE XBSP FEMALE

BSP FEMALE X BSP FEMALE

BSP BULKHEAD BSP LOCKNUT BSP BLANKING PLUG

BSP MALE / MALE 90ºELBOW

BSP MALE / FEMALE 90ºCOMPACT ELBOW

JIC MALE X NPTFMALE 90º ELBOW

JIC MALE XSAE 'O' RINGBOSS MALE

BSP MALE XSAE 'O' RINGBOSS MALE

BSP MALE X FEMALEREDUCING BUSH

BSP MALE XMETRIC MALE

BSP MALE X JIC FEMALE

JIC BLANKING PLUG BSP EQUAL FEMALE 'T' JIC MALE X SAE'O'RINGBOSS ADJUSTER 90º

JIC MALE XJIC FEMALE 90º

BSP TEE MALE/MALE MALE EQUAL

JIC MALE XMALE X FEMALE TEE

BSP BLANKING CAP METRIC MALE X MALE JIC MALE BULKHEADWITH LOCKNUT

BSP TEE MALE X MALEX FEMALE

BSP TEE MALE XFEMALE / MALE

BSP MALE X FEMALE45º SWEPT ELBOW

BSP MALE / FEMALE90º SWEPT ELBOW

BANJO BOLT METRIC PLUG METRIC CAP

28

BSP MALE XBSP MALEEQUAL

BSP MALE XBSP MALEUNEQUAL

BSP MALE XBSP TAPERMALE

BSP MALE XNPTF MALE

BSP MALE XJIC MALE

JIC MALE XNPTF MALE

STEEL TUBING 2001

HWMTSEAMLESS STEEL TUBES DIN 2391 MATERIAL ST

37.4 NBK

THICKNESS STATIC DYNAMIC BURST KG/MTR

MM W/P BAR W/P BAR PRE. BAR APPROX

4 0.75 409 393 1,820 0.063

5 1 432 416 2,120 0.099

6 1 389 374 1,680 0.123

6 1.5 549 528 3,050 0.166

6 1 333 289 1,190 0.173

8 1.5 431 414 1,860 0.24

10 1 282 249 870 0.222

10 1.5 373 358 1,380 0.314

12 1.5 353 305 1,150 0.388

12 2 409 393 1,580 0.493

14 1.5 302 265 940 0.462

15 1.5 282 249 980 0.499

15 2 376 323 1,250 0.641

16 2 353 305 1,170 0.691

18 1.5 235 210 780 0.61

18 2 313 274 1,040 0.789

20 1.5 212 191 570 0.684

20 2 282 249 920 0.888

20 2.5 353 305 1,220 1.079

22 2 256 228 850 0.986

22 2.5 320 280 1,040 1.202

25 2.5 282 249 920 1.387

25 3 338 294 1,050 1.628

28 2 201 182 620 1.282

28 2.5 252 224 770 1.572

28 3 302 265 920 1.85

30 3 282 249 920 1.998

35 2.5 201 182 620 2.004

35 3 242 216 720 2.367

38 2.5 186 168 550 2.189

38 4 297 261 970 3.354

42 3 201 182 580 2.885

STEEL TUBING

OD

Steel Tubes DIN 2391

29

Accessories 2001

H4000

SIZE ININCHES

MM INCHES

BSP NPT

2 1/8 1/8

4 1/4 1/4

6 3/8 3/8

8 1/2 1/2

12 3/4 3/4

16 1 1

10

12

15

19

21

23

26

31 31

33 33

37 37

40 40

41 41

47 47

52 52

CODE

HZP

CODE

QUICK RELEASE COUPLINGS

SPRING GUARDSSIZE IN

MM

ID

10

12

15

19

21

23

26

ID IDCODE CODE

10

BONDEDBONDED

10

12 12

14 14

16 16

18 18

20 20

22 22

24 24

26 26

28 28

30 30

36 36

2

4

6

8

10

12

16

20

24

32

1/8

1/4

3/8

1/2

5/8

3/4

1

1 1/4

1 1/2

2

DOWTY SEALS - METRIC

DOWTY SEALS - INCH SIZES

HZS01HZS05

30Accessories

Other Products

Other Products

2001

Other Products RangeAircondition and Refrigeration Hoses

Steel Braided fuel hoses

Oil Suction/Delivery hoses

Water Suction/Delivery hoses

Air Hoses

Radiator hoses

PVC reinforced hoses

Cement hoses

Oxygen/Acetylene hoses

Nylon Tubing

Copper Tubing

Reusable fittings in different threads and sizes

Eremeto Fittings

Brass Compression fittings

Brass Adaptors

Brass Low pressure fittings

Stainless Steel compression fittings

Camlock Coupling, King Nipples etc.

Bolt clamps, Steel clips

Tube clamps

Brass Air Coupler

Plastic Connectors

Ball Valves and Gate Valves

"O" Rings, Copper washers etc.

31

Technical Information 2001

32Technical Information

2001

33

Technical Information


2001

1 K

Pa

= 0

.145

PS

I = 1

/100

BA

R =

0.0

1019

KG

/SQ

CM

EX

AM

PLE

:- 2

1.1

KG

/SQ

CM

= 3

00 P

SI =

20.

6 B

AR

S =

206

0 K

Pa

= 2

.06

Mpa

kg/s

q cm

p.s.

Iba

rskg

/sq

cmp.

s.I

bars

kg/s

q cm

p.s.

Iba

rskg

/sq

cmp.

s.I

bars

kg/s

q cm

p.s.

Iba

rs

21.1

300

20.6

916

1.74

2300

158.

6230

2.39

4300

296.

5544

3.04

6300

434.

4858

3.68

8300

572.

4124

.635

024

.14

165.

2623

5016

2.07

305.

9143

5030

0.00

446.

5563

5043

7.93

587.

2083

5057

5.86

28.1

400

27.5

916

8.78

2400

165.

5230

9.42

4400

303.

4545

0.07

6400

441.

3859

0.72

8400

579.

3131

.645

031

.03

172.

2924

5016

8.97

312.

9444

5030

6.90

453.

5964

5044

4.83

594.

2384

5058

2.76

35.2

500

34.4

817

5.81

2500

172.

4131

6.46

4500

310.

3445

7.10

6500

448.

2859

7.75

8500

586.

21

38.7

550

37.9

317

9.32

2550

175.

8631

9.97

4550

313.

7946

0.62

6550

451.

7260

1.27

8550

589.

6642

.260

041

.38

182.

8426

0017

9.31

323.

4946

0031

7.24

464.

1466

0045

5.17

604.

7886

0059

3.10

45.7

650

44.8

318

6.36

2650

182.

7632

7.00

4650

320.

6946

7.65

6650

458.

6260

8.30

8650

596.

5549

.270

048

.28

189.

8727

0018

6.21

330.

5247

0032

4.14

471.

1767

0046

2.07

611.

8187

0060

0.00

52.7

750

51.7

219

3.39

2750

189.

6633

4.04

4750

327.

5947

4.68

6750

465.

5261

5.33

8750

603.

45

56.3

800

55.1

719

6.91

2800

193.

1033

7.55

4800

331.

0347

8.20

6800

468.

9761

8.85

8800

606.

9059

.885

058

.62

200.

4228

5019

6.55

341.

0748

5033

4.48

481.

7268

5047

2.41

622.

3688

5061

0.34

63.3

900

62.0

720

3.94

2900

200.

0034

4.59

4900

337.

9348

5.23

6900

475.

8662

5.88

8900

613.

7966

.895

065

.52

207.

4529

5020

3.45

348.

1049

5034

1.38

488.

7569

5047

9.31

629.

4089

5061

7.24

70.3

1000

68.9

721

0.97

3000

206.

9035

1.62

5000

344.

8349

2.26

7000

482.

7663

2.91

9000

620.

6973

.810

5072

.41

214.

4930

5021

0.34

355.

1350

5034

8.28

495.

7870

5048

6.21

636.

4390

5062

4.14

77.3

1100

75.8

621

8.00

3100

213.

7935

8.65

5100

351.

7249

9.30

7100

489.

6663

9.94

9100

627.

5980

.911

5079

.31

221.

5231

5021

7.24

362.

1751

5035

5.17

502.

8171

5049

3.10

643.

4691

5063

1.03

84.4

1200

82.7

622

5.04

3200

220.

6936

5.68

5200

358.

6250

6.33

7200

496.

5564

6.98

9200

634.

4887

.912

5086

.21

228.

5532

5022

4.14

369.

2052

5036

2.07

509.

8572

5050

0.00

650.

4992

5063

7.93

91.4

1300

89.6

623

2.07

3300

227.

5937

2.71

5300

365.

5251

3.36

7300

503.

4565

4.01

9300

641.

3894

.913

5093

.10

235.

5833

5023

1.03

376.

2353

5036

8.97

516.

8873

5050

6.90

657.

5293

5064

4.83

98.4

1400

96.5

523

9.10

3400

234.

4837

9.75

5400

372.

4152

0.39

7400

510.

3466

1.04

9400

648.

2810

214

5010

0.00

242.

6234

5023

7.93

383.

2654

5037

5.86

523.

9174

5051

3.79

664.

5694

5065

1.72

105.

515

0010

3.45

246.

1335

0024

1.38

386.

7855

0037

9.31

527.

4375

0051

7.24

668.

0795

0065

5.17

109

1550

106.

9024

9.65

3550

244.

8339

0.30

5550

382.

7653

0.94

7550

520.

6967

1.59

9550

658.

6211

2.5

1600

110.

3425

3.16

3600

248.

2839

3.81

5600

386.

2153

4.46

7600

524.

1467

5.11

9600

662.

0711

616

5011

3.79

256.

6836

5025

1.72

397.

3356

5038

9.66

537.

9776

5052

7.59

678.

6296

5066

5.52

119.

517

0011

7.24

260.

2037

0025

5.17

400.

8457

0039

3.10

541.

4977

0053

1.03

682.

1497

0066

8.97

123.

117

5012

0.69

263.

7137

5025

8.62

404.

3657

5039

6.55

545.

0177

5053

4.48

685.

6597

5067

2.41

126.

618

0012

4.14

267.

2338

0026

2.07

407.

8858

0040

0.00

548.

5278

0053

7.93

689.

1798

0067

5.86

130.

118

5012

7.59

270.

7538

5026

5.52

411.

3958

5040

3.45

552.

0478

5054

1.38

692.

6998

5067

9.31

133.

619

0013

1.03

274.

2639

0026

8.97

414.

9159

0040

6.90

555.

5679

0054

4.83

696.

2099

0068

2.76

137.

119

5013

4.48

277.

7839

5027

2.41

418.

4259

5041

0.34

559.

0779

5054

8.28

699.

7299

5068

6.21

140.

620

0013

7.93

281.

2940

0027

5.86

421.

9460

0041

3.79

562.

5980

0055

1.72

703.

2310

000

689.

6614

4.1

2050

141.

3828

4.81

4050

279.

3142

5.46

6050

417.

2456

6.10

8050

555.

1770

6.75

1005

069

3.10

147.

721

0014

4.83

288.

3341

0028

2.76

428.

9761

0042

0.69

569.

6281

0055

8.62

710.

2710

100

696.

5515

1.2

2150

148.

2829

1.84

4150

286.

2143

2.49

6150

424.

1457

3.14

8150

562.

0771

3.78

1015

070

0.00

154.

722

0015

1.72

295.

3642

0028

9.66

436.

0162

0042

7.59

576.

6582

0056

5.52

717.

3010

200

703.

4515

8.2

2250

155.

1729

8.87

4250

293.

1043

9.52

6250

431.

0358

0.17

8250

568.

9772

0.82

1025

070

6.90

PRES

SUR

E C

ON

VER

SIO

N C

HA

RT

34

1 ps

i = 0

.068

96 B

AR

= 6

.896

6 K

Pa

= 0

.070

3 K

G/S

Q C

M

1 B

AR

= 1

4.5

PS

I = 1

00 K

Pa

= 1

/10

MP

a =

1.0

19 K

G/S

Q C

M1

KG

/SQ

CM

= 1

4.22

PS

I = 9

8.1

KP

a =

.981

BA

R1

MP

a =

145

PS

I = 1

0 B

AR

= 1

0.19

KG

/SQ

CM



2001

35



2001

36



Assembly and Supply of:

• Hydraulic Hoses and Fittings • Stainless steel corrugated hoses and fittings • Stainless steel expansion bellows • Steel tubes, tube fittings & tube clamps • Suction / Discharge, Air & Chemical hoses etc. • Pressure gauges, dowty seals, ball valves, quick release couplings etc

Inflex Hydraulic Engines & Machinery Spare Parts Trading llc

catalogue - inflex hydraulics-dubai

Documents