catalogue jiangsu sieyuan hertz[1]

8/11/2019 Catalogue Jiangsu Sieyuan Hertz[1]

1/24

JIANGSU SIEYUAN HERTZ INSTRUMENT TRANSFORMER CO., LTD.

Address: No. 5, West Huimin Road, Economic Development Zone, Rugao, Jia ngsu Province, P.R.China.

Zip code: 226572

Tel: 0086-513-87303629

Fax: 0086-513-87530056

Email: [email protected]

Http://www.sieyuan.net !"#$%&'()*JIANGSU SIEYUAN HERTZ INSTRUMENT TRANSFORMER CO.,LTD.

SieyuanSieyuanSieyuanSieyuanSieyuan

!



2/24

Jiangsu Sieyuan Hertz Instrument Transformer Co., Ltd. conducts research and development on

technically advanced and safe quality products on its own, including:

35-500 kV Oil Impregnated Inverted Current Transformers,

35-500 kV Sulfur Hexafluoride Gas Insulated Inverted Current Transformers,35-500 kV Capacitor Voltage Transformers,

35-500 kV Sulfur Hexafluoride Gas Insulated Voltage Transformers for mounting in GIS,

35-220 kV Inductive Voltage Transformers,

10-220 kV Oil Impregnated Tank type Current Transformers,

35-110 kV Dry type Current Transformers and Dry Graded Wall Bushing, etc.

The products have obtained KEMA test certification in Holland, as well as inspection and examination

by national authorities.

Sieyuan Hertz leads the instrument transformer trade to a higher level at a sustained speed, with ardent

enthusiasm, prudent attitude

and customer orientation.

Jiangsu Sieyuan Hertz Instrument Transformer Co., Ltd. ( www.sieyuan.net ) covers the land

area of more than 100,000 square meters and the construction area of over 60,000 squaremeters, which is within the factory area of more than 50,000 square meters. With a sealing &

purifying workshop up to 100,000 grade, it is regarded as a world-class instrument transformer

production base in China.

Sieyuan Hertz has a R&D and management team with the most competitive power, it now has

more than 400 employees, among the employees, the percent of engineering and technology

talents who got Ph. D or master degree or graduated from universities is 45%, and the

Company also invites foreign professionals to take charge of the technology and quality

management.

Sieyuan Hertz leads the instrument transformer trade to a

higher level at a sustained speed, with ardent enthusiasm,

prudent attitude and customer orientation.

Company Brief

!"#$%&'()*


Comp any Brief

1 2



3/24

Advanced Facilities

In order to realize the product design con-

cept and reduce the uncertainty brought bymanual operation, during the production

process, Siyuan Hertz adopts automatic pro-

duction equipments.

World Class Testing Condition

Secondary Coil Winding Machine Capacitance Graded Bushings Wind-

ing Machines

German Welding Robots

Sieyuan Hertz has the world-classy testing conditions and perfect testing equipments, including three

six-facet shielding high voltage testing laboratory with the rated voltage 1000 kilovolt, 600 kilovolt, 300kilovolt and also an impulse voltage generator up to 3000 kilovolt with automatic measuring system.

In the profession field, the company introduces firstly the partial discharge test in power frequency

withstand voltage, which is more stringent than national and IEC standards, and ensures much more

reliance and safety for product running.

Transient Characteristics Tester for

Current Transformer

600kV Power Frequency Testing Trans-

former

300kV Power Frequency Testing Trans-

former

1000kV Power Frequency Testing

Transformer

3000kV Lightning Impulse Generator

High Frequency Capacitance and Stray

Capacitance Meter

Ferro-resonance Testing Analysis Sys-

tem for Capacitor Voltage Transformer

(CVT)

3 4

!"#$%&'()*



G e r ma n L e y b o l d

Vacuum Treatment

System

Capacitance Graded Bushings Winding

Machine for SF6Gas Insulated Products

Assembly Shop for SF6Gas Insulated

Current Transformer

German B&R Aptitude Coil Machine


4/24

Sieyuan Hertz promotes total quality management and strictly abiding by

ISO9000 quality management system, the regulation of technical re-

quirement is quite clear and uniform from parts inspection to routine test,

so as to ensure the whole production under control and the products can

be traced back. To ensure the product quality meeting international

standards, all major raw materials are imported from foreign countries,

such as: cable paper, semiconducting paper, aluminum foil, transformer

oil, insulating material for sulfur hexafluoride gas insulated products,enameled wire and compacting material for product etc.

Sieyuan Hertz consistently follows the mission of "service creates value" by professional, speedy,

sincere and quality service. We endeavor to help lower our customer' operation costs while improvingtheir business efficiency and competitiveness.

Sieyuan Hertz is committed to offer our customers with products featuring "high-safety", "high-

reliance", "high-accuracy" and "high-standardization". Since our foundation, the company has gained

earnest support from users in all lines. At present, our sales network covers all the cities in China and

overseas markets. In north, east, south, and mid China, northwest and northeast China, sales offices

and after-sale service stations have been established. In addition, the company has established

perfect partnership with State Grid Corporation of China, and China Southern Power Grid Co., Ltd.,

Sieyuan Hertz has continuously won bids in major power station projects in Vietnam, Burma and

Nigeria, which marks that our products have known worldwide.

Reliable Products & Quality

ISO9000 Quality System Certificate (SGS)

General Customer Service

Hebei Electric Power

Corporation, China

Jiangsu Electric Power Corporation, China

500kV SF6Gas Insulated Inverted Cur-

rent Transformers

Zhejiang Electric Power Corporation,

China 500kV Oil Impregnated Inverted

Current Transformers

Shanxi Electric Powr

Corporation, China

Jiangsu Electric Power

Corporation, China

Jilin Electric Power

Corporation, China

Ningxia Electric Power

Corporation, China

Nanjing Electric

Power

Corporation,

China

Shanxi Electric Power

Corporation, China

Guangdong ElectricPower Corporation,

China

5 6

!"#$%&'()*




5/24

Symbol Explanation

LVB Series Oil Immersed Inverted Current Transformers

L V B (T)

Antipollution Class (W2, W3)

Voltage Grade (kV)

With Transient Protection

With Protection

Inverted

Current Transformer

LVB (T) series current transformer has an inverted structure with oil-immersed paper insulation (Please see the left figure).

It is connected in series with electric energy measurement, measuring, relay protection and transient protection functions.

Primary coil has a through-type conducting rod structure with good dynamic and thermal stability; its maximum thermal

current can be up to 63kA/3s (when primary coil is connected in series).

Primary coil passes through the center of secondary coil without flux leakage. Measurement precision can be up to 0.1and

0.2S grades.

Secondary coil is fixed in an aluminum shielded-case by casting organic materials; secondary measurement and

protection circuits cannot be damaged by insulation breakdown.

Optimal capacitor screen bushing is made of a complete piece of imported broadsheet cable paper; it is coiled by an

automatic wrapping machine which is controlled by a computer with high performance. It has a technological de-centrality

and an excellent insulation property. Partial discharge test is carried out under power frequency test voltage.

Use the automatic vacuum drying treatment system produced by LEYBOLD in Germany, carry out pressure-changing

vacuum drying treatment and oiling after a product is assembled completely, and all insulation materials are imported from

foreign countries. All these ensure that the dielectric dissipation factor of complete product tan_ is less than 0.3%.

External insulation uses a porcelain cover with high strength, optimal surface field intensity together with lower field

intensity of internal bushing make the porcelain cover avoid explosion.Secondary outlet box is a complete structure by casting the aluminum alloy; its sealing structure meets the requirement

of IP55, which is dust proof, water proof and air permeable; secondary terminal for wiring uses Phoenix special terminal; it

is more convenient for operations such as plug-in, pull-out and wiring etc.

Connection between components uses argon-arc welding, fill in high pressure nitrogen to detect leakage after assembly

is complete, so oil penetration and oil leakage caused by oil-immersed products are resolved at root.

Use an aluminum alloy cast case, all components including the base, connection box, stainless steel expander, and

nameplate etc do not rust forever.

It is light and handy with a small volume and light weight.

This product is free-maintenance.

Introduction to Structure

Stainless Steel Expander

Primary Terminal Plate on P1 Side

Bushing

Core and winding assembly

Porcelain Cover

Oil Drain ValueNameplate

Secondary Terminal Box

Oil Level Observation Window

Primary Terminal Plate on P2 Side

7 8

!"#$%&'()*




6/24

Technical Parameters of LVB (T) - 35

LVB-35W2/1X LVB-35W3/1X LVB(T)-35W2/2X LVB(T)-35W3/2X

Technical Parameters of LVB 66

LVB-66W2/1X LVB-66W3/1X LVB-66W2/2X LVB-66W3/2X

TypeLVB-66W2/1X LVB-66W3/2X

LVB-66W3/1X LVB-66W3/2X

Highest voltage for equipment kV 72.5

Rated frequency Hz 50/60

Rated power-frquency withstand voltage (rms) kV 160

Rated lightning impulse withstand voltage (full wave)(peak) kV 350

Rated lightning impulse withstand voltage (chopped wave)(peak) kV 403

Flashover distance mm 700

Creepage distance mm 1812/2250

Rated primary current (Maximum) A 4000

Rated secondary current A 1; 5

Accuracy classes (they can be combined if necessary) 0.1; 0.2; 0.5; 0.2S;0.5S;5P;10P;TPU;TPS

Rated output VA 10-50

Safety factor FS 5; 10

Accuracy limit factor ALF 10; 15; 20; 30

Short-time thermal current (Maximum) kA 63kA/3s (In series)

Dynamic current (Maximum) kA 160

Allowable mechanical load of transformer: Static N 3000

Allowable mechanical load of transformer: Dynamic N 5000

Net weight kg 200 450

Note: 1 The parameters in the table are not changeless; the Company reserves the right to change them.

2 When the parameters required by the customer are different from that in the table, they can be negotiated according to the

requirement of the customer.

3 There are several current ratios for one-time switch of the transformer.

4 We also can provide with products which meet the requirement of IEC and ANSI.

Note: 1 The Company reserves the right to change the parameters in the table.





TypeLVB-35W2/1X LVB(T)-35W2/2X

LVB-35W3/1X LVB(T)-35W3/2X



Rated power-frequency withstand voltage (rms) kV 95

Rated lightning impulse withstand voltage(full wave)(peak)kV 200

Rated lightning impulse withstand voltage (Chopped wave) (Peak) kV 230



Rated primary current (Maximum) A 4000(8000)


Accuracy classes (they can be combined if necessary) 0.1;0.2;0.5;0.2S;0.5S;5P;10P;TPY;TPS

Rated output VA 10-50

Safety factor FS 5;10




Allowable mechanical load of transformer (Static) N 3000

Allowable mechanical load of transformer (Dynamic) N 5000


Outline and Dimensional Drawing Outline and Dimensional Drawing

9 10

!"#$%&'()*




7/24

LVB-110(132)W2/1X

LVB-110(132)W3/1X

LVB-110(132)W2/2X

LVB-110(132)W3/2X

LVB-110(132)W2/3X

LVB-110(132)W3/3X

11 12

!"#$%&'()*



Outline and Dimensional Drawing



requirement of the customer.3 There are several current ratios for one-time switch of the transformer.


Technical Parameters of LVB-110

TypeL VB- 110W2 /1X L VB- 11 0W2/ 2X LVB- 11 0W2/ 3X

L VB- 110W3 /1X L VB- 11 0W3/ 2X LVB- 11 0W3/ 3X

Highest voltage for equipment kV 126


Rated power-frequency withstand voltage (rms) kV 230Rated lightning impulse withstand voltage (full wave)(peak) kV 550





Rated secondary current A 1;5

Accuracy classes (they can be combined if necessary) 0.1; 0.2; 0.5; 0.2S; 0.5S; 5P; 10P; TPY; TPS

Rated output VA 10~50







Net weight kg 230 475 525






Technical Parameters of LVB-132

TypeL VB- 132W2 /1X L VB- 13 2W2/ 2X LVB- 13 2W2/ 3X

L VB- 132W3 /1X L VB- 13 2W3/ 2X LVB- 13 2W3/ 3X









Rated secondary current A 1;5









Net weight kg 230 475 525


8/24






Technical Parameters of LVB (T)-330500

Outline and dimensional drawings for

LVB(T)-330W2 Current Transformer


LVB(T)-500W2 Current Transformer


Type LVB (T) -330W2 LVB (T) -500W2

Highest voltage for equipment kV 363 550


Rated power-frequency withstand voltage (rms) kV 510 740

Rated lightning impulse withstand voltage (full wave)(peak) kV 1175 1675

Rated lightning impulse withstand voltage (chopped wave)(peak) kV 1352 1930

Impulse withstand voltage (Wet Test) kV 950 1175

Flashover distance mm 2650 4000

Creepage distance mm 9100 13750

Rated primary current (Maximum) A 5000 5000

Rated secondary current A 5; 1 5; 1

Accuracy classes (they can be combined if necessary) 0.2S; 0.5S; 0.1; 0.2S; 0.5S; 0.1;

0. 2; 0. 5; 5P ; 10P ; T PY 0 .2; 0. 5; 5P ; 10P ; T PY

Rated output VA 10~50 10~50

Safety factor FS 5; 10 5; 10

Accuracy limit factor ALF 10; 15; 20; 30; 40 10; 15; 20; 30; 40

Times of symmetry short-circuit current Kssc 10, 15, 20, 25, 30

TPY Parameter Operating cycle C-O-C-O

Output capacity VA 10, 15

Thermal current (Maximum) kA 63 kA / 3s ( in series )

Dynamic current (Maximum) kA 160 ( in series )

Weight of oil 280 432

Net weight 1000 2250

Gross weight 1300 3000

13 14

!"#$%&'()*



LVB-220W2/1X LVB-220W3/1X LVB-220W2/2X LVB-220W3/2X







TypeLVB-220W2/2X LVB (T)-220W2/3X

LVB-220W3/2X LVB (T)-220W3/3X









Rated secondary current A 15







Allowable mechanical load of transformer: Static N 4000

Allowable mechanical load of transformer: Dynamic N 6000




9/24

LVQB series current transformer has an inverted structure with SF6 gas insulation (Please see the figure). It is connectedin series with electric energy measurement, measuring, and relay protection functions.

Primary coil has a through-type conducting rod structure with good dynamic and thermal stability; its maximum thermal

current can be up to 63kA/3s (when primary coil is connected in series).

Primary coil passes through the center of secondary coil without flux leakage. Measurement precision can be up to 0.1

and 0.2S grades.

Secondary coil is fixed in an aluminum shielded-case by casting organic materials; measurement and protection circuits

cannot be damaged by insulation breakdown.

Optimal Electrode shielded structure improves internal and external field distribution of the product. It has an excellent

insulation property. Partial discharge test is carried out under power frequency test voltage.

There are two types of external insulation bushing for customers: they have excellent explosion-resistant and shock-

resistant behaviors.

External bushing uses silicon rubber umbrella type apron reinforced by glass fiber. Optimal external surface field makes

silicon rubber avoid electrical erosion.

Porcelain bushing shell with high-strength.

Secondary outlet box is a complete structure by casting the aluminum alloy; its sealing structure meets the requirement

of IP55, which is dust proof, water proof and air permeable; secondary terminal for wiring uses Phoenix special terminal; itis more convenient for operations such as plug-in, pull-out and wiring etc.

Seal ring is made of imported fluorocarbon silicone rubber, it is suitable for using in the area where there is great

temperature change or the environmental temperature is extreme. The leakage rate per year is less than 0.5%.

Product performance keeps changeless after severe transporting test.

Use an aluminum alloy cast case, all components including the base, connection box, stainless steel expander, and

nameplate etc do not rust forever.

A density meter is installed on the base, this meter can show the gas pressure and density in the transformer (The show

value is turned to be the internal gas pressure at 20automatically). A signal for refilling gas is sent out when the pressure

in the transformer drops down to the alarm pressure.


Shell

Silicon Rubber Bushing

Secondary Lead Pipe

Outlet BoxBase

Nameplate

Electrode

Conducting Block

Main Body

Rupture Disc

15 16

!"#$%&'()*



LVQB Series SF6Gas-insulated Inverted Current Transformer

Antipollution Class (W2, W3)

Voltage Grade (kV)

With Transient protection

With Protection

SF6Gas-insulation

Inverted

Current Transformer

L V Q B (T)

Symbol Explanation


10/24

17 18

!"#$%&'()*



Fig. 2

Technical Parameters of LVQB-110

LVQB-110W2/1X LVQB-110W3/1X LVQB-110W2/2X LVQB-110W3/2X







TypeLVQB-110W2/1X LVQB-110W2/2X

LVQB-110W3/1X LVQB-110W3/2X

Highest Voltage for Equipment kV 126

Rated Frequency Hz 50




Flashover Distance mm 1100

Creepage Distance mm 3150, 3950

Rated Primary Current In (Maximum) A 2400 (1:2; 1:2:4 available)

Rated Secondary Current A 1; 5

Accuracy Classes (They can be combined if necessary) 0.1; 0.2; 0.5; 0.2S; 0.5S; 5P; 10P

Rated Output VA 10~50

Safety Factor FS 5; 10

Accuracy limit Factor ALF 10; 15; 20; 30

Thermal Current (Maximum) kA 50kA/3s

Dynamic Current (Maximum) kA 125

Air Pressure (Absolute value) MPa 0.5

Outline and Installation Dimensions Fig.2

Net Weight kg 490 565

Gross Weight kg 590 670


Fig.1 LVQB-66W2

Type LVQB-66W2 LVQB-66W3

Highest voltage for Equipment kV 72.5

Rated Frequency Hz 50/60




Flashover Distance mm 650

Creepage Distance mm 1812, 2250

Rated Primary Current In (Maximum) A 4000

Rated Secondary Current A 1; 5

Accuracy Classes (They can be combined if necessary) 0.1; 0.2; 0.5; 0.2S; 0.5S; 5P; 10P

Rated Output VA 10~50

Safety Factor FS 5; 10

Accuracy Limit Factor ALF 10; 15; 20; 30

Thermal Current (Maximum) kA 50kA/3s (In series)


Air Pressure (Absolute Value) MPa 0.5

Outline and Installation Dimensions Fig.1

Net Weight kg 400

Gross Weight kg 490








11/24

19 20

!"#$%&'()*




LVQB(T)-330W3 Current Transformer


LVQB(T)-500W3 Current Transformer








Type LVQB(T)-330W3 LVQB(T) -500W3

Highest voltage for equipment kV 363 550


Rated power-frequency withstand voltage (rms) kV 510/567 740

Rated lightning impulse withstand voltage (full wave)(peak) kV 1175/1305 1675

Rated lightning impulse withstand voltage (chopped wave)(peak) kV 1352/1501 1930

Impulse withstand voltage (Wet Test) kV 950/1156 1175

Flashover distance mm 2850 4220

Creepage distance mm 9080 17050

Rated primary current (Maximum) A 5000(2 2500) 5000(2 2500)

Rated secondary current A 5; 1 5; 1

Accuracy classes (they can be combined if necessary)0.2S;0.5S;0.1;0.2; 0.2S;0.5S;0.1;0.2;

0.5;5P;10P;TPY 0.5;5P;10P;TPY

Rated output VA 10~50 10~50

Safety factor FS 5; 10 5; 10

Accuracy limit factor ALF 10; 15; 20; 30; 40 10; 15; 20; 30; 40

Times of symmetry short-circuit current Kssc 10, 15, 20, 25, 30

TPY Parameter Operating cycle C - O - C - O

Output capacity VA 10, 15

Thermal current (Maximum) kA 63 kA / 3s ( in series )

Dynamic current (Maximum) kA 160 ( in series )

Weight of oil 280 432

Net weight 1800 3000

Gross weight 2600 4000

Fig. 3LVQB-220W2/1X LVQB-220W3/1X








LVQB(T)-220W2/2X LVQB(T)-220W3/2X

TypeLVQB-220W2/1X LVQB(T)-220W2/2X

LVQB-220W3/1X LVQB(T)-220W3/2X


Rated frequency Hz 50





Creepage distance mm 6300, 7900

Rated primary current In (Maximum) A 4000


Accuracy classes (they can be combined if necessary) 0.1;0.2;0.5;0.2S;0.5S;5P;10P 0.1;0.2;0.5;0.2S;0.5S5P;10PTPY;TPS




Thermal current (Maximum) kA 63kA/3s


Rated gas pressure (Absolute value) MPa 0.5

Outline and installation dimensions Fig.3


Gross weight kg 1350 1500


12/24

21 22

!"#$%&'()*



JDQXF Series SF6Gas-insulated Voltage Transformer

Transformer cabinet is at the bottom of product, main body is in

it, there is a silicon rubber composite insulation bushing or high

strength porcelain bushing at the middle and primary terminals are

at top both sides of product.A SF6 gas density controller is equipped on the transformer

cabinet; it can monitor the SF6 gas pressure in-line. There is a

pressure-relief device on the top; the rupture (relief) pressure is 0.

7 MPa without oil or explosion risk, and it is free-maintenance.

Main body is inside the cabinet, use the composite insulation of

polyester film and SF6 as interlayer insulation, so it has high

strength insulation. Coil uses single-staged tower structure, so it

has a good shock resistant performance.

Product shell is carried out hot galvanizing or uses cast aluminum

alloy, all components including stainless steel fasteners and name-

plate etc work in outdoor for long time without rust.

Primary terminal block uses cast aluminum part, the static test

load it can bear is no less than 3000N.

Secondary outlet box is a complete structure by casting the

aluminum alloy; its sealing structure meets the requirement of IP55,

which is dust proof, water proof and air permeable; secondaryterminal for wiring uses Phoenix special terminal; it is more conve-


Symbol Explanation

Antipollution Class W2 or W3

Rated Voltage Grade

Measurement Coil and Pro-

tection Coil Being Separate

With Residual Voltage Coil

Gas-insulation

Single Phase

Voltage Transformer

nient for operations such as plug-in, pull-out and wiring etc.

Optimal Electrode shielded structure improves internal and external field distribution of the product. It has an excellent

insulation property. Partial discharge test is carried out under power frequency test voltage.

Seal ring is made of imported fluorocarbon silicone rubber, it is suitable for using in the area where there is great

temperature change or the environmental temperature is extreme. The leakage rate per year is less than 0.5%.

High voltage coil is made of imported polyester film and conducting wires with high insulation strength and stable

performance; use imported automatic winding equipment to complete the wire winding and the wrapping of interlayer

insulation automatically according to entered instructions.

J D Q X F

Secondary Outlet Box

Cabinet

Main Body

Primary Conducting Pipe

Bushing Electrode

Silicon Rubber Insulated Bushing

Primary Terminal Block

Explosion Resistant Device

Technical Parameters





Type JDQXF-110W2 / JDQXF-110W3







Creepage distance mm 3150 / 3950

Rated gas pressure (Absolute value) MPa 0.5

Rated voltage factor/time1.2/continual 1.5/30s

Accuracy class and rated output

Secondary coil 1 Secondary coil 2 Residual voltage coil

Accuracy class 0.2 0.5or3P 3P

Rated output VA150 300

100 150 300

Thermal limit output VA 2000

Outline and installation dimensions See the figure

Net weight kg 450

Gross weight kg 550

JDQXF-110W2

It can be designed and made with three coils (one primary coil, one secondary coil and one residual voltage coil) or four

coils (one primary coil, two secondary coils and one residual voltage coil) according to the requirement of customer.

Integrated design is reasonable; it shows capacitive character under certain voltage.



13/24

Technical Parameters





Leading wire of secondary coil and leading wire of ground terminal of primary coil are connected with Phoenix special

terminal in the secondary terminal box via the terminal block cast as a whole with epoxy on the shell. It is more convenient

for operations such as plug-in, pull-out and wiring etc. The sealing performance meets the requirement of IP55.

The transformer can be installed horizontally or vertically.

Type JDQXF-110ZH

Highest voltage for equipment kV 126/145


Rated power-frequency withstand voltage (rms) kV 230/275

Rated lightning impulse withst and voltage (full wave)(peak) kV 550/650

Rated lightning impulse withstand voltage (chopped wave)(peak) kV 633/748

Rated gas pressure (Absol ute value) MPa 0.5/0.6

Rated voltage factor/time 1.2/continual 1.5/30s

Accuracy class and rated output

Secondary co il 1 Secondary co il 2 Residua l vol tage co il

Accuracy class 0.2 0.5or3P 3P

Rated output VA150 300

75 120 300

Thermal limit output VA 2000

Outline and installation dimensions See the figure

Net weight kg 400

Gross weight kg 500


23 24

!"#$%&'()*



GIS Gas-insulated Voltage Transformer

Voltage transformer matched with GIS is used for SF6

close combined apparatus; it is connected between the

phase and ground. It uses SF6gas as main insulation, anduses polyester film, which is used for interlayer insulation,

as additional insulation.

Main components of transformer

There are lifting blocks, a ground terminal, a nameplate,

an instruction plate and a secondary terminal box on the

metal shell. The shell body is formed by welding steel

plates and hot galvanizing, all connecting bolts uses stain-

less standard parts, they can work in outdoor place for long

time, and do not rust forever. A metal rupture disc is

installed on the base. If a high energy discharge occurs in

it, the rupture disc will break to relief pressure, so the safety

of product is improved.

Main body is installed in the shell, high voltage electrode


J D Q X F

Supporting rack

Shell

Charging

Connection

Lifting Block

Grounding Base

Insulator

Conduit

Core andWindingAssembly

and low voltage shielded plate use aluminum plates, which are rotated and pressed to form and carried out polishing

treatment. Optimal Electrode shielded structure improves internal and external field distribution of the product. It has anexcellent insulation property. Partial discharge test is carried out under power frequency test voltage.

High voltage coil uses single-staged tower structure, so it has a good shock resistant performance. Use imported polyester

films and high strength enameled wires, so it has high insulation strength. Use imported automatic winding equipment to

complete the wire winding and the wrapping of interlayer insulation automatically according to entered instructions.

It can be designed and made with three coils (one primary coil, one secondary coil and one residual voltage coil) or four

coils (one primary coil, two secondary coils and one residual voltage coil) according to the requirement of customer.

Disc insulator is used as the partition between the gas chamber of transformer and that of composite apparatus.

Transformer and composite apparatus can have SF6 gas with different pressure. The connection between high voltage

conductor and high voltage electrode on main body uses elastic structure.

Rated Voltage

Measurement Coil and Protection Coil Being Separate

With Residual Voltage Coil

Gas-insulation

Dfor Single Phase;Sfor Three Phases

Voltage Transformer

Symbol Explanation

Secondary

Outlet Box

Explosion Re-

sistant Device


14/24

Note: 1 The parameters in the table are not changeless; the Company reserves the right to change them.2 When the parameters required by the customer are different from that in the table, they can be negotiated according to the




Fig.1 Outline and Installation Dimensions of LB6-110 type Current Transformer (Primary Coil is in series)


Main technical Parameters

Type LB6-110(W2) LB6-110(W3) GY

Rated primary voltage kV 110







Creepage distance mm 3150, 3906

Rated primary current In (Maximum) A 2 50~2 1000


Accuracy classes (they can be combined if necessary) 0.2; 0.5; 0.2S; 0.5S; 5P; 10P

Rated output (Maximum) VA 50 (Pigtail 30)



Short-time thermal current (depend on the number of31.5~45kA / 1s

turns of primary and secondary coils) kA

Dynamic current (Maximum) kA 80~115

Allowable mechanical load of transformer: Static 2000N



Gross weight kg 750 780

25 26

!"#$%&'()*



LB6-110 type Current Transformer

Symbol Explanation

L B 6

110

Voltage Grade, kV

Design No.

With Protection

Current Transformer

Except for the above basic symbol, suffix W2means that it is

suitable for using in Grade area, suffixW3means that it is

suitable for using in Grade area, and suffixGYmeans that it

is suitable for using in plateau area.


LB6-110 type current transformer has an oil-immersed fully-

sealed structure. The primary coil is U-shape, the main body is fixed

on the bracket, the main insulation uses capacitor type oilpaper, use

the high voltage cable paper to wrap the core of primary coil, and set

up several capacitor shields among it, the internal shield is con-

nected to high potential, and the external shield is connected to

ground reliably.

There is a porcelain bushing at the upper part of oil tank, and an

oil conservator is set up on top of porcelain bushing, primary outlet

terminal is on the oil conservator, series-parallel connection uses an

external switch device, i.e., the switching operation is carried out

outside the oil conservator.

Use a stainless steel expander as the oil compensation device to

ensure oil quality. Oil level is indicated by the pointer at the upper

window of expander.

A nameplate is set up on the oil tank to show the technical data. There are four lifting blocks for hoisting, an oil-discharge

valve and earthing bolts at the bottom of oil tank.

The product can have four to six secondary coils, the secondary measurement coil is made by microcrystalline alloy with

high magnetic conductivity, thus can ensure that the measurement precision reaches up to 0.2 grade or 0.2S grade. 2600A

or above current transformer has a pigtail at measurement secondary coil, in order to get two current ratios.

Use new technology and new materials such as hot galvanizing or stainless steel standard parts etc for outside of the

product to make complete equipment rustless.

Reasonable and originative structure as well as advanced technology ensures that the product runs reliably, safely and

durably.


15/24




3 There are several current ratios for one-time switch of the transformer.4 We also can provide with products which meet the requirement of IEC and ANSI.

Outline and Dimensional Drawings for LB7-220 type Current Transformer


Technical Parameters of LB7-220

Type LB7-220




Rated lightning impulse withstand voltage (full wave)(peak) kV 1050Rated lightning impulse withstand voltage (chopped wave)(peak) kV 1208


Creepage distance mm 6300W2)7900W3

Rated primary current (Maximum) A 2 6002 800









Net weight kg 1180

27 28

!"#$%&'()*



Introduction to Product

This product has an oil-immersed fully-sealed structure. It con-

sists of metal expander, oil conservator, main body and other

accessories. The primary coil is U-shape, the main insulation uses

capacitor type oilpaper, use the high voltage cable paper to wrap

the core of primary coil, and set up several main shields among it.

The secondary coil is set up at the lower part of primary coil; the

whole main body is fixed in the oil tank. There is a bushing at upper

part of oil tank, and an oil conservator is set up on top of bushing, the

primary wire is lead out via the hole of oil conservator, the series-

parallel switching operation is carried out outside the oil conservator.

Use a stainless steel expander as the oil compensation device to

ensure oil quality. Oil level is indicated by the pointer at the upper window of expander.

A nameplate showing the technical data and a description plate showing the coils arrangement schematic diagram are set

up on the oil tank. There are four holes or lifting blocks on the under-frame for hoisting the product, and an oil-discharge valve

and earthing bolts at bottom of oil tank.

The product can have five or six secondary coils, the secondary measurement coil is made by microcrystalline alloy with

high magnetic conductivity, thus can ensure that the measurement precision reaches up to 0.2 grade or 0.2S grade.

The secondary terminal has limit and double sealing functions. The outlet box is made by stretching wholly; it is elaborate

and practical. The oil tank is carried out surface treatment; it is bright and durable.

Complete transformer is fully sealed. New technology and new materials such as hot galvanizing or stainless steel

standard parts etc are used for outside of the product to prevent from rustless and get long working life.

Reasonable and originative structure as well as advanced technology ensures that the product runs reliably, safely and

durably.

LB7-220 type Current Transformer

Symbol Explanation

L B 7220

Voltage Grade, kV

Design No.

With Protection

Current Transformer

Except for the above basic symbol, suffixW2means that it is

suitable for using in Grade area, suffixW3means that it is

suitable for using in Grade area, and suffixGYmeans that it

is suitable for using in plateau area.


16/24

29 30

Rated primary voltage kV 35

Highest voltage for the equipment kV 40.5



Rated lightning impulse withstand voltage (full wave)(peak) 185


Creepage distance mm 10501256

Rated primary current A 52000


Accuracy classes (they can be combined if necessary) 40. 2; 0.5; 0.2S; 0.5S; 5P; 10P


Safety factor FS 10


Thermal current (Maximum) kA 40 kA/ 1s


Type LAB6-35

Main Technical Parameters


Outline and Dimensional Drawing for LAB6-35 type Current Transformer with Expander

!"#$%&'()*



LAB6-35 type Current Transformer

Symbol explanation

L A B 635

Voltage Grade, kV

Design No.

With Protection

Chain type

Current Transformer

Except for the above basic symbol, suffixW2means that it is suitable for using in Gradepolluted area, suffixW3

means that it is suitable for using in Gradepolluted area.

Introduction to product

LAB6-35 type current transformer uses oilpaper insulation for outdoor use, it is a fully sealed product. It is used as a current,

electric energy measurement and relay protective device for AC power system with highest voltage for the equipment of the

equipment 40.5 kV and rated frequency 50Hz.

The product can have three or four secondary coils, the magnetic core uses microcrystalline alloy with high magnetic

conductivity, the measurement precision of secondary coil can be up to 0.2 grade or 0.2S grade.

The oil conservator of this product is made of aluminum alloy. The oil tank is made by high-quality steel plate stretching

to form as a whole, in order to reduce welding seam leakage points; it has not exposed sealing structure, so it can lengthen

the aging period of seal ring, ensure that the sealing performance is reliable, improve the run quality of insulation oil, and

ensure that the run is safe and reliable.


17/24

Outline and Dimensional Drawing for LGBJ-35 type Current Transformer

Technical Parameters of LGBJ-35 Current Transformer





Rated lightning impulse withstand voltage (full wave)(peak)kV 200Rated lightning impulse withstand voltage (chopped wave)(peak) kV 230









Short-time thermal current (depend on the number of turns of 50kA/ 3s (In series)

primary and secondary coils)MaximumkA


Allowable mechanical load of transformer: Static 2000N


Net weight kg 100

Gross weight kg 120


2 When the parameters required by the customer are different from that in the table, they can be negotiated according to therequirement of the customer.



Type LGBJ-35W2 LGBJ-35W3

31 32

!"#$%&'()*



LGBJ type Current Transformer


This product uses the capacitor equalizing theory; it uses optimal

structural design by special electric field analysis and calculation; it

is light and handy, and it is convenient for installation.

The product is made of fire resistant and corrosion resistant

material without oil or porcelain. It not only can be used in the city

with high sanitary requirement, but also can be used in the area with

severe pollution.

This series product consists of primary coil, secondary coil, shell

and base plate etc components.

The secondary coil is set up at the bottom; it is covered by shell

completely to prevent from dust and outer matters entering, and

prevent from being corroded by sand blown by wind.

The end shield or ground shield is led out separately to be convenient for test, and it also has good humidity resistance.

The insulation resistance is stable and reliable.

The secondary terminal block uses cast as a whole.

This is a patented product of our company, and the patent No. is ZL 02 2 88478.5.

This product uses organic composite material as its main insulation, so it has a long working life, and can be up to 30 years.

No oil: there is not explosion risk, it is safe and does not leak forever.

No porcelain: small and light.

No gas: there is not possibility to pollute environment.

Non-epoxy cast: it is used in the open air, it is stable and reliable.

Advanced technology: use the optimal design concept with uniform voltage distribution; partial discharge is small and

dielectric loss factor is low.

Use special technology, carry out 1% NaCl water cooking test for 42 hours, the data do not change obviously before and

after the test.

The primary terminal uses copper or aluminium; it is led out horizontally, so it is convenient for wiring.

Symbol explanation

L G B J

110 GY W2

Antipollution Class

Tableland type

Voltage Class, kV

With High Insulation

With Protection

Dry type

Current Transformer


18/24

Technical Parameters of LGBJ-110 type Current Transformer



Type LGBJ -110W2 LGBJ -110W3

Highest voltage for the equipment kV 126












Short-t ime thermal current (depend on the number o f turns of pr imary and 50kA/3s (In ser ies)

secondary coils) (Maximum) kA


Allowable mechanical load of transformer: Static N 2000N


Net weight kg 300

Gross weight kg 350


2 When the parameters required by the customer are different from that in the table, they can be negotiated according to therequirement of the customer.



33 34

!"#$%&'()*




Technical Parameters of LGBJ-66 type Current Transformer


Type LGBJ-66W2 LGBJ-66W3













Sho rt -t im e the rm al cur re nt ( de pe nd o n the n um be r o f turns o f p ri ma ry 5 0kA/3s ( In ser ie s)

and secondary coils) (Maximum) kA


Allowable mechanical load of transformer: Static N 2000N

Net weight kg 220

Gross weight kg 230







19/24

Note: 1 We can supply the plateau type product which is suitable for altitude 3000m or above according to the requirement of customer,

its technical parameters are the same as that of the product with 31mm/kV ratio of creepage distance and the highest voltage for

equipment of the system;


Type JDC6-110 JDCF-110







Rated voltage factor 1.2/ continual 1.5/ 30s 1.2/ continual 1.5/ 30s

Rated voltage ratio 110/ /0.1/ /0.1 110/ /0.1/ /0.1/ /0.1

Accuracy class 0.2(0.5, 3P)/3P 0.2/0.5/3P

Rated output VA 150(300,500)/300 100/250/300

Limit output VA 2000 2000

Oil weight kg 130/165 130/165

Total weight kg 675/695 675/695


33 333


35 36

JDCF-110 type Inductive Voltage Transformer

(Creepage Distance25mm/kV

JDCF-110 type Inductive Voltage Transformer

Creepage Distance31mm/kV

!"#$%&'()*



JDC6-110 and JDCF-110 type Inductive Voltage Transformers


JDC6 -110 and JDCF-110 type voltage transformers use electromagnetic oilpaper insulation for outdoor use; it is a fully

sealed product. It is used as a current, electric energy measurement and relay protective device for the system with effectively

earthed neutral with the highest voltage for equipment 126 kV and rated frequency 50Hz.

This product has a reliable design and low magnetic density, it can avoid ferroresonance over-voltage, the secondary coil

can separate measurement from protection; the measuring precision can be up to grade 0.2 to meet the different requirement

of customers and the high precision measuring requirement required by power departments.

This product uses a stainless steel expander; it is carried out advanced vacuum drying and vacuum oiling treatment

technology, so it has small dielectric loss and low partial discharge, and can ensure that the operation of product is safe and

reliable.

Symbol explanation

J D C 6 110W

Anti Fouling

Rated Voltage, kV

Design Number

With Residual Voltage

Winding in Cascade Stage

Single Phase

Voltage Transformer

J D

C F

110

W

Anti Fouling

Rated Voltage, kV

With Secondary Winding for

Measurement and Protection

respectively

With Residual Voltage

Winding in Cascade Stage

Single Phase

Voltage Transformer


20/24

37 38

!"#$%&'()*



Outline and Dimensional Drawing of

JDX6-35W3 Inductive Voltage Transformer(Accuracy Class 0.5/3P)


JD6-35W3 Inductive Voltage Transformer



Type JD6-35 JDX6-35




Rated lightning impulse withstand voltage (full wave)(peak) kV 200Rated lightning impulse wit hstand voltage (chopped wave)(peak) kV 230

Creepage distance 31

Rated voltage factor 1.2 continual 1.2 continual/ 1.98h

Rated voltage ratio 35/0.135/ /0.1/ /0.1/3

35/ /0.1/ /0.1/ /0.1/3

Accuracy class 0.2(0.5)0.2(0.5)/3P

0.2/1.5/3P

Rated output VA 80(150)80(150)/10

30/80/1000

Limit output VA 1000 1000

Oil weight kg 29 24

Total weight kg 135 127

3 3

3 3 3


JDX6-35W3 Inductive Voltage Transformer(Accuracy Class 0.2/0.5/3P)

JD6-35 and JDX6-35 type Inductive Voltage Transformers

Symbol explanation

J D (X) 6 35 W

Anti Fouling

Rated Voltage, kV

Design Number

With Residual Voltage Winding

Single Phase

Voltage Transformer


JD6-35 and JDX6-35 type voltage transformers use oilpaper insulation for outdoor use; it is a fully sealed product. It is used

as a current, electric energy measurement and relay protective device for the system with the highest voltage for equipment

40.5 kV and rated frequency 50Hz.

JD6-35 type voltage transformer has a structure with single phase and double coils, it is suitable for connecting at the place

between the phase and phase in a system with ineffectively earthed neutral.

JDX6-35 type voltage transformer has a structure with single phase and triple coils; it is suitable for connecting at the place

between the phase and ground in a system with ineffectively earthed neutral.

The core of product uses high quality silicon steel sheets, the measuring precision can be up to grade 0.2; the oil tank has

a form structure, it is formed by stretching high quality steel plate wholly to reduce the number of welding seam leakage points.

The rubber ring uses double sealing to ensure that the operation of product is reliable.

JDX6-35JD6-35


21/24

39 40

!"#$%&'()*



TYD110/220 type Capacitor Voltage Transformer

Symbol explanation

T YD 110/220 0.01 H

Anti Fouling

Rated Capacitance, F

Rated Phase Voltage

Capacitor Voltage Transformer

Integrated Equipment


Capacitor voltage transformer series products are suitable for current, electric energy measurement and relay protection

in a system with effectively earthed neutral with rated voltage 35kV, 66kV, 110kV or 220kV and rated frequency 50Hz. It can

also be used for carrier wave communication concurrently.

This product consists of capacitor voltage divider and electromagnetic unit the medium voltage terminal and low voltage

terminal of capacitor voltage divider are lead out into an oil tank equipped with electromagnetic unit. The electromagnetic unit

consists of middle transformer, a compensation reactor and a damper

The capacitor voltage divider consists of a bushing, a core and a metal expander. The core of capacitor is combined by

several film-paper composite media and serial parts which are made by coiling aluminum foils, it is carried out vacuum dipping

treatment, the porcelain bushing is filled with transformer oil, and it is equipped with the metal expander to compensate the

change of oil volume at different temperatures.

This series transformer has a quick saturation damping device with a quick transient response speed, and it also can damp

ferroresonance reliably.

There is a carrier wave communication terminal in the secondary outlet box, and it also has an over-voltage protection clearance.

There are an oil level gauge, an outlet box, a nameplate, an oil-discharge plug and an earthing base outside the oil tank.

The sealing structure of product is optimized, so it has a good sealing performance.

3

Maintechnicalparameters

Note:1Theparametersinthetablearenotchangeless;theCompanyreservestherighttochan

gethem.

2Whentheparametersrequ

iredbythecustomeraredifferentfromthatinthetable,theycanbenegotiatedaccordingtotherequirementofthecustom

er.

3Wecansupplytheproductwith31mm/kVratioofcreepagedistanceandhighestvoltageforequipmentofthesystem;

4WealsocanprovidewithproductswhichmeettherequirementofIECandANSI

3 3 3 3 3 3

1

TYD35/

-0.02W3

40.5

35/

0.1/

0.1/

0.1/3

50

0.2

50

0.5

100

3P

95/200

3

1

500

2

TYD66/

-0.02W3

72.5

66/

0.1/

0.1/

0.1/3

100

0.2

100

0.5

100

3P

140/325

3

1

500

3

TYD110/

-0.0066H

126

110/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

200/480

2

5

500

4

TYD110/

-0.007H

126

110/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

200/480

2

5

500

5

TYD110/

-0.008H

126

110/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

200/480

2

5

500

6

TYD110/

-0.01H

126

110/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

200/480

2

5

500

7

TYD110/

-0.01H

126

110/

0.1/

0.1/

0.1

100

/0.2

100/0.5

100/3P

100/3P

200/480

2

5

570

8

TYD110/

-0.015H

126

110/

0.1/

0.1/

0.1

100

/0.2

100/0.5

100/3P

100/3P

200/480

2

5

570

9

TYD110/

-0.02H

126

110/

0.1/

0.1/

0.1

150

/0.2

150/0.5

150/3P

100/3P

200/480

2

5

680

10

TYD220/

-0.0033H

252

220/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

395/950

2

5

750

11

TYD220/

-0.0035H

252

220/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

395/950

2

5

750

12

TYD220/

-0.004H

252

220/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

395/950

2

5

750

13

TYD220/

-0.005H

252

220/

0.1/

0.1

100

/0.2

150

/0.5

100/3P

395/950

2

5

750

14

TYD220/

-0.005H

252

220/

0.1/

0.1/

0.1

100

/0.2

100/0.5

100/3P

100/3P

395/950

2

5

820

15

TYD220/

-0.0075H

252

220/

0.1/

0.1/

0.1

100

/0.2

100/0.5

100/3P

100/3P

395/950

2

5

820

16

TYD220/

-0.01H

252

220/

0.1/

0.1/

0.1

150

/0.2

150/0.5

150/3P

100/3P

395/950

2

5

910

H

ighestRatedPrimary

RatedSecondary

RatedOutput(VA)

Insulation

Ratioofcree

pagedistance

S/N

Type

V

oltage

Voltage

Voltage(kV)

/AccuracyClass

Level(kV)

andHighes

tvoltagefor

Weight

(kV)

(kV)

1a-1n

2a-2n

da-dn

1a-1n

2a-2n

da-dn

PowerFrequency/Lightnin

equipment(mm/kV)

(kg)

33 3 3 3 3 3 3 3 3 3 3 3 3

33 3 3 3 3 3 3 3 3 3 3 3 3

33 3 3 3 3 3 3 3 3 3 3 3 3

3 3

3 3

3 3

3 3


22/24


23/24

43 44

!"#$%&'()*



Outline and Dimensional Drawings of CWG - L - 40.5 - CWG - L - 126

CWG-72.5/630 220 22040 4-14

60

CWG-72.5/800 220 220 181565

CWG-72.5/1000 2470 770 220 770 220 1040 5 50 275 300 2250

CWG-72.5/1250 220 220 50 4-18 70

CWG-72.5/1600 220 2206-18

75

CWG-126/6301040

2201040

2201390 40 4-14

80

CWG-126/800 220 220 90

CWG-126/10003 16 0 1 04 0

2201040

2201390 700 350 350

315095

CWG-126/1250 220 220 50 4-1 8 39 06

CWG-126/16001040

2201040

2201390

110

CWG-126/2000 220 220 120

Table 2 unit: mm

O ut do or si de I nd oo r S id e E ar th P ot en ti al I ns ta ll at io n F la ng e T er mi na l B lo ck C re e- W ei -

Type Total Insulation Maximum Insulation Maximum Total Total Indoor Diameter of Instal lation Distance Between Instal l- page ght

Length Distance External Insulation External Length Length L5 Installation Hole Hole the Center of Two Holes a ti on d is t- kg

L1 Diameter L3 Diameter L4 L2 D1 a1 Hole ance

CWG-L-40.5/630 180 18040 4-14

50

CWG-L-40.5/800 55

CWG-L-40.5/1000 1910 220 220 101560

CWG-L-40.5/1250 470 220 470 220 970 450 500 200 50 4-18 1 26065

CWG-L-40.5/1600 220 220

CWG-L-40.5/3150 2070 220 220 60 8-18 70

CWG-L-40.5/4000 2070 220 220 60 8-18 70

CWG-L-72.5/630 220 220 40 4-14 65

CWG-L-72.5/800 220 220 6-18 181570

CWG-L-72.5/1000 2820 730 220 730 220 1400 9 70 670 300 2250

CWG-L-72.5/1250 220 220 50 4-18 75

CWG-L-72.5/1600 220 220 80

CWG-L-126/6301100

2201100

2202070 40 4-14

80

CWG-L-126/800 220 220 90

CWG-L-126/1000 35601100

2201100

2202070 950 600 350

315095

CWG-L-126/1250 220 22050 4-18

3906

CWG-L-126/16001100

2201100

2202070

110

CWG-L-126/2000 220 220 120


Type test items

Complete all test items according to the requirement of GB/T4109-1991.

Rated voltage is 12~126 kV, standard current values can be chosen from the following (Unit: A)

250, 400, 630, 800, 1000, 1250, 1600, 2000, 3150, 4000

Precision of attached current transformer:

1. Measurement coil: 0.1, 0.2, 0.5, 0.2S, 0.5S (Grade)

2. Accuracy grade of protection coil: 5P, 10P; Accuracy limit factor:10, 15, 20, 30

3. Secondary output capacity (VA): 20, 25, 30, 40 50

Antipollution grade and cree page distance

Outline and Dimensional Drawings of CWG-40.5-CWG-126

Insulation Level and Discharge Level (Voltage Unit: kV)

R ated Vol ta ge N om in al Vol ta ge Pow er -f re qu en cy Withs ta nd L ig htni ng Imp ul se Par ti al D isch arge L evel

Ur o f th e System Vol ta ge (Dry or Wet ) Withs ta nd Vo ltag e M ea su re me nt Vol ta ge pC

40.5 35 95 200 35 10

72.5 66 147 325 63 10

126 110 230 550 109 10

Light, Medium 20 3.5

Severe 25 4.0

Special severe 31 4.0

Nominal Value of Minimum Ratio of Creepage Distance and Highest Voltage

for Equipment Relative to Ground mm/kV ( Highest Voltage for Equipment )

Ratio of Creepage Distance and Highest

Voltage for Equipment/ Flashover Distance

Antipollution

Grade

Table 1 unit: mm

O ut do or si de I nd oo r S id e E ar th P ot en ti al I ns ta ll at io n F la ng e T er mi na l B lo ck C re e- W ei -

Type Total Insulation Maximum Insulation Maximum Total Total Indoor Diameter of Instal lation Distance Between Install- page ght

Length Distance External Insulation External Length Length L5 Installation Hole Hole the Center of Two Holes a ti on d is t- kg

L1 Diameter L3 Diameter L4 L2 D1 a1 Hole ance

CWG-40.5/630180 180 40 4-14

45

CWG-40.5/800 50

CWG-40.5/1000 1560 220 220 101555

CWG-40.5/1250440

220440

220600 300 150 200 6-f18

50 4-18 1260 60

CWG-40.5/1600 220 220 60

CWG-40.5/31501720

220 22060 8-18

65

CWG-40.5/4000 220 220 65


24/24

45

!"#$%&'()*



Parameters of CWG-126 (CWG-L-126)

Type CWG-126/250~4000 CWG-L-126/250~4000





Flashout Distance mm 1200

Creepage Distance mm 3150 or 3906

Rated Primary Current (Maximum) A 2000

Rated Secondary Current of Built-in Current Transformer A 15

Accuracy Classes of Built-in Current Transformer0.10.20.50.2S; 0.5S; 5P; 10P

(They can be combined if necessary)

Rated Output of Built-in Current Transformer VA 10-50

Safety Factor of Built-in Current Transformer FS 5; 10

Accuracy Limit Factor of Built-in Current Transformer 10; 15; 20; 30

Short-time Thermal Current 25 times of rated current

Bending Load Withstand Test 2000N

Outline and Installation Dimensions See the corresponding drawings




3 We can supply the product with 31mm/kV ratio of creepage distance and highest voltage for equipment of the system;


CWG-126/2504000

CWG-L-126/2504000

126

50/60

230

550

633

1200

3150 or 3906

2000

15

0.10.20.50.2S; 0.5S; 5P; 10P

10-50

5; 1010; 15; 20; 30

25 times of rated current

2000N

See the corresponding drawings


2 When the parameters required by the customer are different from that in the table, they can be negotiated according to the requirement of the customer.

3 We can supply the product with 31mm/kV ratio of creepage distance and highest voltage for equipment of the system;


TypeCWG-72.5/2504000

CWG-L-72.5/2504000






Flashout Distance mm 1200



R ated Secon da ry C ur re nt o f Bui lt -i n C ur re nt T ra ns fo rm er A 15

Accuracy Classes of Built-in Current Transformer0.10.20.50.2S;0.5S;5P;10P


Rated Output of Built-in Current Transformer VA 10-50

Safety Factor of Built-in Current Transformer FS 5;10Accuracy Limit factor of Built-in Current Transformer 10; 15; 20; 30




Parameters of CWG-72.5 (CWG-L-72.5)

Parameters of CWG-40.5 (CWG-L-40.5)

Type CWG-40.5/250~4000 CWG-L-40.5/250~4000

Highest Voltage for Equipment kV 40.5






Rated Secondary Current of Built-in Current Transformer A 1, 5

Accuracy Classes of Built-in Current Transformer0.2; 0.5; 0.2S; 0.5S; 5P; 10P


Rated Output VA 10-50

Safety Factor FS 5, 10

Accuracy limit Factor ALF 10; 15; 20; 30









46

catalogue jiangsu sieyuan hertz[1]

Documents