catalogue stalats ab eng

0

STALATS AB

January 2013

Catalogue

0

out of 16

Grinding-Polishing Machine L IGH T - PR ODUCT IVE - R EL IABL E - UN IVER SAL

Professional edging one-disc grinding and polishing machine GPM-240 is used for milling, grinding of uneven surfaces, for polishing of concrete, terrazzo (cement and mosaic coverings) and stone, wooden surfaces on small areas. Convenient for operation at difficult to reach areas close to columns and edges, next to walls. Can be used to remove coverings, remains of glue, paint, etc.

Features: Regulation of rotation speed 100-2000 rpm (inverter). Work in 3 regimes due to soft regulation of tools rotation speed:

o cleaning (floor washing with shampoo and water) – 200 – 300 rpm

o grinding (750 – 1000 rpm) o polishing (1500 – 2000 rpm).

Operation close to the edge 0 mm. Rollers on the skirt protect the wall from scratching. Low weight – 39 kg, and small size. Light-colored wheels do not leave marks on floor. Strong aluminum wheels based on bearings. Control of levelness and flatness of tool disc in two coordinates. Dust outlet for dry grinding. Water tank (2.5 l) for regulated liquid supply or regulated running water supply. Reverse rotation of working disc (tool turning direction). Bayonet quick-fixed tool disc for different types, forms and systems of tools. Fast change of membrane elasticity level at flexible grinding head. Long operating life due to all-metal parts. Handle with regulated height and slope. Regulated pressure for grinding and polishing. Pocket for spare discs and tools. Quick-detachable sliding rubber strap with near-wall rollers. Easily dismountable on two parts compact construction. For edge operation easy to change from right to left side (and opposite) due to wheels

axis movement. Tools on three screws or on magnets and pins as well as pads, buffs, brushes and

other special tools with diameter from 200 to 600 mm can be installed on quick-detachable bayonet tool discs.

Membrane unit and tool disc are unified with GPM-500. German electronics and Swedish bearings. Machine handle protects control panel from mechanical damage. As option – a system of additional weights to increase grinding pressure. As option – projector lightening. As option – convenient quick magnet tools shift.

Model Units Working Condition

Transportation Condition

Power kW 1.5 Parameters: mm Grinding Head Control Panel Length mm 1310 535 1270 Width mm 380 380 220 Height mm 1140 370 295 Voltage V 230 Tools Diamond tools, pads, baffs, sandpaper, etc. Grinding disc diameter mm 1x236 Tool speed rpm 100-2000 Water tank capacity l 2.5 Weight, not more than kg 39 Price

Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com

mailto:[email protected]

http://www.stalats.com/

out of 16

Grinding-Polishing Machines L IGH T - PR ODUCT IVE - R EL IABL E - UN IVER SAL

Planetary grinding machines GPM-400, GPM-500 and GPM-750 are used for high-productive and effective grinding of concrete, granite, mosaic, marble, wooden (including parquet) floors as well as for removal of old glue or paint coverings and final floor processing (polishing). Rotation speed can be changed from 300 to 1350 rpm. All models are adapted for operation with industrial vacuum cleaner. Wet grinding is possible due to integrated water supply.

Features: Silent and convenient in operation Adjustable discs’ rotation speed 300-1350 rpm Easy to handle due to low weight Flexible grinding heads Bayonet-type screwless mounting of tool discs Convenient and fast magnetic fixing of diamond tools as well as

common fixing on 3 screws Air swirl under the grinding head enable more efficient dust

collection Reverse direction of grinding heads rotation Unique belt tightening device allows controlling and regulating

interior belt tension without disassemble of grinding head. No special device is needed to mount interior belt

Long operating life due to reduced load on the bearing, premium quality belt, spring steel head system and all zink-plated galvanized steel parts

Dust-free environment when connected to a vacuum cleaner. Integrated water supply for wet grinding

GM-750 can be optionally equipped with extra weights to increase or decrease grinding pressure GM-750 has long extended removable handle. Adjustable handle height to ensure comfort operation

Model Units GPM-400 GPM-500 GPM-750 Power kW 2.2 4.0 11.0

Dimensions for transportation Length mm 780 1100 1240 Width mm 490 590 820 Height mm 900 1150 1250

Dimensions at operation Length mm 1010 1350 1600 Width mm 490 550 820 Height (handle upright) mm 900 1500 2270 Voltage V 230 400 400 Tools Diamond or tungsten carbide segments Grinding disc diameter mm 180 236 260 Number of grinding discs pcs 3 3 4 Tool speed rpm 300-1350 300-1350 300-1350 Working width mm 430 520 750 Water tank capacity l 6 20 20 Weight, not more than kg 100 160 320 Price




out of 16

Portable Screeds L IGH T - R EL IABL E - M AN EUVER ABL E - UN IVER SAL

Portable Screed Electric (PSE) and Portable Screed Petrol (PSP) are used for compaction and smoothing of concrete slab both on form-work and without guiding rails. Portable screeds have easy-to-change replaceable blades that allow working in difficult to reach places.

Model PSE PSP

Engine Electric – 230 V / 42 V Petrol Honda GX 35 Weight without blades, kg 13 14 Power, kW 0.19 1.1 Width, mm 600 850 Height, mm 1100 1100

Blade length, m 1.0; 1.5; 2.0; 3.0; 4.0; 5.01 Vibration penetration into concrete mix, mm

70…100 100…120

Blade material aluminium

Price, €

Features: Strong and light steel wear-resistant frame Ergonomic handles, isolated from vibration Easy-to-change rig id blades PSP engine is highly lifted over concrete surface that

protects it from dirt PSE 220 V is safe and convenient for in-door operation Used for concrete slab up to 120 mm depth Easy to disassemble for transportation Convenient in operation speed control and alarm switch Blades are available in several lengths

Ref. Picture Price 1.0 m Aluminium blade 1.5 m Aluminium blade 2.0 m Aluminium blade 2.5 m Aluminium blade 3.0 m Aluminium blade 3.5 m Aluminium blade 4.0 m Aluminium blade 5.0 m Aluminium blade

1 Non-standard blade lengths can be produced upon request Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Channel and Scraper Floats L IGH T - R EL IABL E - EASY-T O-USE ON L AR GE AR EAS

Channel Float (CF) is used to flatten and slightly correct concrete surface by adjusting the angle of attack up to 30 degrees and operating area length up to 7 meters. Scraper float (SF) is used to control floor flatness, to eliminate hillocks and to fill dimples on concrete surface. The possibility to gradually change the angle of attack by rotating the handle simplifies the usage of the float. Dimensions, m Weight, kg

CF SF CF SF Blades 1.0 1.0 1.38 2.20

1.5 1.5 2.11 3.29 2.0 2.0 2.84 4.41 2.5 2.5 3.56 5.50 3.0 3.0 4.28 6.59

3.5 7.68 4.0 8.77 4.5 9.86 5.0 10.90 5.5 12.04 6.0 13.10

Standard handle 3.02 1.42 Extender for standard handle 3.03 1.53 Material aluminium

Features: Blades are made of light and strong special aluminium Unique simple reducer done on basis of stainless cable wire Opportunity to install a stabilizer to keep rig idity of blades longer than 1.5 m Long handle (3-6m) to increase the processed area No toothed coupling in the construction increases product life time Wide range of offered blades, handles and float extenders greatly expand tool application area.

Ref. Specification Picture Price Channel Float (CF) = blade + reducer + handle ± extender 1.0 m blade + reducer Blade 1.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm;

1.5 m blade + reducer Blade 1.5 x .015 x 0.025 m. Reducer 225 x 150 x 132 mm; 2.0 m blade + reducer Blade 2.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm; 2.5 m blade + reducer Blade 2.5 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm; 3.0 m blade + reducer Blade 3.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm;

Scraper Float (SF) = blade + reducer + handle ± extender 1.0 m blade + reducer Blade 1.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm

Blade 1.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm

1.5 m blade + reducer 2.0 m blade + reducer

Blade 2.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm

2.5 m blade + reducer Blade 2.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 3.0 m blade + reducer Blade 3.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 3.5 m blade + reducer Blade 3.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 4.0 m blade + reducer Blade 4.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 4.5 m blade + reducer Blade 4.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 5.0 m blade + reducer Blade 5.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 6.0 m blade + reducer Blade 6.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm

3.0 m handle 3.0 m extender

2 Other handle lengths (1.0 m, 1.5 m, 2.0 m) can be produced upon request 3 Other extender lengths (1.0 m, 1.5 m, 2.0 m) can be produced upon request Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Double Beam Screeds

POWER FUL - EASY T O USE - R EL IABL E - UN IVER SAL

Double beam Screed Electric (DSE) and Double beam Screed Petrol (DSP) are used for compaction and smoothing of fresh concrete slab up to 200 mm thick. Directional and adjustable vibration and adjustable beam deflection makes concrete flat and plain.

Model DSE DSP Engine Electric-400 V / 42 V Petrol 95, Honda GX 160 Standard lengths, m 3.15; 4.25; 5.25; 6.25; 7.25*; 8.25*; 9.25*; 10.25*4 Weight depending on standard lengths, m

73; 76; 85; 92 78; 87; 94; 101

Engine weight, kg 19 15.1 Power, kW 0.55 4.0 Width, mm 450 Height, mm 355 555 Beam height, mm 120 Vibration penetration into concrete mix, mm

200…250

Beam material aluminium

Features: Produced of light special aluminium Regulated direction and power of vibration Adjustable tensioning rods Reversible direction of screed movement Equipped with special pull handles and straps Drive unit can be placed on different beam lengths Optimal weight to be used by two operators Curved in the middle profile to compensate for vibrator weight

Ref. Specification Picture Price DSE 3.15m: Double beam Screed Electric

400V/42V; 0.55kW; 73kg; vibration depth 220mm

DSE 4.25m: Double beam Screed Electric






DSP 3.15m: Double beam Screed Petrol

Honda GX160; 4kW; 78kg; vibration depth 250mm







4 * Can be produced upon request. Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Mini Screed PR ODUCT IVE - EASY T O OPER AT E - CON VEN IEN T FOR L AR GE AR EAS

Mini screed (MS) is used for vibration and leveling of wet concrete slab to achieve smooth and flat surfaces.

Model Mini screed (MS) Engine Electric-230V/42 V Power, kW 0.19 Blade length, m 1.5; 2.0; 2.55 Weight depending on blade length , kg

16.0; 17.8; 19.9

Width, mm 220 Height, mm 320 Handle length, m 3 Blade material aluminium

Features: Possible to process and correct concrete floor flatness on the distance up to 7 m Adjustable angle of attack up to 15 degrees Effectively removes laitance from concrete surface

Ref. Specification Price MS 1.5m: Mini Screed electric with 1.5m blade 230V/42V; 0.19kW; handle length 3m MS 2.0m: Mini Screed electric with 2.0m blade 230V/42V; 0.19kW; handle length 3m MS 2.5m: Mini Screed electric with 2.5m blade 230V/42V; 0.19kW; handle length 3m

5 Non-standard blade lengths can be produced upon request Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Spreader Wagon EFFECT IVE - UN IVER SAL - M UL T IFUN CT ION AL

Spreader wagon (SW) provides even scattering of topping material on wet concrete surface to achieve homogeneous in color and durability floor surface.

Model SW 1000 Weight, kg 45 Material capacity, kg 100 Width general, mm 1060 Width operating, mm 1000 Height, mm 1126 ± 50 Length, mm 990

Features: Regulated discharge of topping per sq. m. Improved reliability due to spherical bearings For SW-800 the wire drum is shifted relative to

the bunker that allows topping from the bunker to fall down straight on the floor

For SW-1000 wide pneumatic wheels do not leave track on fresh concrete

For SW-1000 manual blocking device for one or two wheels with the drum for even material scattering For SW-1000 high maneuverability due to possibility to unlock the wheels from the drum.

Ref. Specification Picture Price SW-1000: Spreader Wagon 1000 mm working width

Working width 1000 mm, ripper and wide pneumatic wheels, loading capacity 100 kg




out of 16

Concrete Floor Formwork: ω-Form ST R ON G - R IGID - R EL IABL E

Omega-Form represents a formwork for concrete floors with a compensation joint. Omega-Form sets upper level of floor surface, allows joining a cut-off concrete slab with a newly created one and forms expansion / compensation joints.

Model Height, m Length, m Metal thickness, m Price ω – Form 0.12 2.4 / 3 2.5 / m.

Cramp / pcs. Wedge / pcs. Screw / pcs.

Metal framing / pcs. Metal joint / pcs.

Features: Protects from concrete floor edge destruction Best steel quality Light weight Reusable accessories Easy to set up Prevents vertical and horizontal movement of concrete slabs

An option with noncorrosive edges:

Description of ω-Form Setting 1. Omega-form. 2. Staple used to connect omega-form to the bearing screw (4), which

places omega-form into the vertical position. 3. Wedge-bar used to tightly fix the connection “staple-bearing screw”. 4. Bearing screw regulates omega-form level (floor level). 5. Metal framing used to connect two neighboring concrete slabs.

Flexible coupling allows slight movement of neighboring concrete slabs along omega-form movement joint line.

a. Metal joint used to connect two neighboring concrete slabs. 6. Outside and inside forms are placed moved one relative another by

step multiple to the square slots.




out of 16

Concrete Floor Formwork: T-Form SIM PL E - CON VEN IEN T - EFFECT IVE - CH EAP

T-form is used to set upper level of floor surface. It can be used as a leave-in-place screed rail for all types of ground and separating floors. Model Height (H), mm Length (L), mm Metal thickness (S), mm Price/m, T-30 30 3000 (2500) 0.5 ÷ 0.55 T-45 45 3000 (2500) 0.65 ÷ 0.7 T-60 60 3000 (2500) 0.75 ÷ 0.8

Features: Allows meeting tolerance and leveling requirements on large area floors Forms movement and insulated joints Allows forming angled surfaces and acts as an interface between concrete slabs No surface deformation from working screed Special perforation holes allow using steel reinforcement to prevent lifting of neighboring concrete slabs Minimizes crack formation

Description of T-Form Setting 1. Drive reinforcement pins of 8 mm diameter into the ground with the

distance in between from 750mm to 1200 mm, height minus 20mm from intended floor level, with accuracy ± 10mm. Height of pin entry into the ground depends on ground density and varies from 500 mm (sand) to 50 mm (concrete). In case of concrete entry height should not be limited (see picture 1).

2. One by one bend out reinforcement pins into opposite sides, and put T-form on them.

3. After setting T-form level with a leveling instrument, attach with electric welding to reinforcement pins (see picture 2).

4. It is possible to place T-forms on concrete hillocks (see picture 3). 5. Connect T-forms between each other with an electrode of 4 or 3 mm

diameter (see picture 4). It makes rigid-joined framework and single surface level without any steps.

6. Pour concrete. 7. After concrete setting, it possible to pour topping on the surface to prevent

T-forms from external exposure (water) and to eliminate metal corrosion (see picture 5).

8. Next day it is possible to start cutting extension joints. Joints can be at once filled in with sealant (see picture 6).

9. Sealant is well-fixed on the top of the T-form because the hole from the cutoff disc is smaller than the T-form width by 0.25 – 1.0 mm. That’s why sealant does not go above floor surface.

10. If topping is not used, it is necessary to cut concrete with a cutoff disc, which is wider than T-form top (see picture 6), and to fill in the hole with sealant. It prevents T-form from corrosion.

11. When grinding the floor with grinding machines, the upper part of the profile is grinded and filled in inside the profile with a sealant and then is grinded again, if necessary.




out of 16

Concrete Buckets L IGH T - CON VEN IEN T - SAFE - COM PACT - T R OUBL E FR EE

Concrete Bucket (CB) and Lay-down Concrete Bucket (LCB) are used for transportation and unloading of concrete as well as for convenient filling of concrete floors and columns in monolithic construction process. Lay-down Concrete Bucket (LCB) has lowered height of concrete loading in horizontal position (see picture below), which allows easy and direct loading from concrete trucks.

Model CB-1 CB-1.5 CB-2 LCB-01 LCB-1.5 Capacity, m3 1.0 1.5 2.0 1.0 1.5 Length, mm 1546 1546 1546 1546 1546 Width, mm 1546 1546 1546 1546 1546 Height, mm 1880 2147 2481 2390 2450 Weight, mm 240 275 325 290 320 Height of concrete loading, m 1.88 2.15 2.48 1.10 1.10

Features:

Easy to regulate chute gate (with a lever) Special lock prevents chute gate from spontaneous

opening Chute gate lever location allows easy and comfortable

bucket operation. The operator can see where concrete is poured

Stable in vertical and horizontal positions It is possible to install electric engine on the cone of the bucket for hard and dry mixes as well as a

rubber elephant trunk to pour into difficult-to-reach areas.

Ref. Specification Price CB-1.0 (Metal Chute) / CB-1.0 (Rubber Hose)

Capacity 1 m³; 220 kg;

CB-1.5 (Metal Chute) / CB-1.5 (Rubber Hose)

Capacity 1.5 m³; 270 kg; loading height 2.15 m

CB-2.0 (Metal Chute) / CB-2.0 (Rubber Hose)

Capacity 2.0 m³; 378 kg; loading height 2.5 m

LCB-1.0 (Metal Chute) / LCB-1.0 (Rubber Hose)

Capacity 1m³; 310kg; loading height 1.1m

LCB-1.5 (Metal Chute) / LCB-1.5 (Rubber Hose)

Capacity 1.5m³; 346kg; loading height 1.1m




out of 16

Liquid Chemical Hardeners / Sealers Name Description Price, €

SPEKTRIN® Hardener – Crystallizer based on organosilicon

Solids – 11%

SPEKTRIN® - penetrating hardener for concrete, terrazzo concrete from 14 days old and stone. Penetrates into the foundation at 4 mm, consolidates, hardens and dust-binds. Increases compression strength of the concrete by as much as 25%, resistance to freeze-thaw cycles, abrasion resistance about 2.5 times why virtually all abrasion dust is eliminated 100%. Increases the resistance to dirt why makes cleaning easy. Easy and cost effective to apply. Zero-VOC, non-flammable, no odour, and safe to use. Treated area can easily be polished until the needed glance level. For use both indoors and outdoors. The product has CE-Marking. Spreading rate: Normally 8 m2/litre on power-floated surface: 12 m2/litre.6

/ ltr.

SPEKTRIN® PLUS Hybrid Hardener / Sealer

based on organosilicon and resin polymer

Solids - 16%

SPEKTRIN® PLUS – penetrating hardener / sealer, modified with 100% polymer resin with a special surfactant for fresh and old concrete. Has all the qualities of SPEKTRIN®, but also creates a curing membrane for even hardening of fresh concrete. After reaction it cannot peel or flake from substrate. Completely eliminates dust, decreases water penetration by 5 times. Increases the resistance to dirt why it makes cleaning easy. Especially efficient on soft concrete and sand-cement foundations. Transparent after drying. The product has CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6

/ ltr.

SPEKTRIN® LITHIUM Deep-Penetrating

Hardener based on lithium silicate

Solids 10%

SPEKTRIN® LITHIUM – deep-penetrating hardener with high content of lithium component. Has all qualities of SPEKTRIN®, but due to the lithium basis penetrates into foundation at 5 mm and deeper. Has much faster reaction time. Accepts pedestrian traffic after 1-2 hours and light vehicles after 24 hours. The most suitable hardener for polished concrete installation. Creates high gloss level at the surface. Recommended for hard and tightly trowelled concrete. The product has a CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6

/ ltr

SPEKTRIN® LITHIUM PLUS

Deep-Penetrating Hybrid Hardener / Sealer

Solids 11%

SPEKTRIN® LITHIUM PLUS – deep-penetrating hardener / sealer with high content of lithium component, has all qualities of SPEKTRIN® LITHIUM, but also creates a curing membrane for even hardening of fresh concrete. Due to the lithium as base material, penetrates deeper into the foundation. Transparent when dry. Recommended for hard and tightly trowelled concrete, also as a final sealing layer in polished concrete technology. The product has a CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6

/ ltr

SPEKTRIN® CLEANER

Concentrated cleaner based on colloidal silica

SPEKTRIN® CLEANER – is a superior waterborne concentrated heavy-duty slightly basic (alkaline) surface cleaner that removes dirt, grease, grime, oil, mildew and algae stains from almost any substrate. Especially excellent on mineral substrates such as concrete and marble as it fortifies its strength with each cleaning. Perfect for polished concrete as it continues to densify over time, creating a harder low-maintenance floor. On polished concrete floors it also maintains the gloss. For use both indoors and outdoors. The product has a CE-Marking. Spreading rate: For regular cleaning use concentration 0.7-2%. For very heavy duty cleaning use concentration 2.5-10%. Normally 5 m2/litre.of ready to use solution.

/ ltr

Pro Urethane Acrylic Sealer WB / Polyurethane water-based vanish – film-forming water-dispersion hybrid urethane-acrylic varnish for mineral and wooden foundations. The acrylic makes the adhesion, and the urethane makes the hardness. The material forms crystal clear surface. Creates high gloss on the surface. For use both indoor and outdoor. Spreading rate: 5-15 m2 / litre.

/ ltr.

Pro Colorant concentrated colorant – colorant for SPEKTRIN® and SPEKTRIN® LITHIUM hardeners, highly resistant against alkaline, weather and UV-light. Added to hardeners in amount of 5-10%. Ecological and anti-allergic properties. Zero VOC (Volatile Organic Compounds) and non-toxic, and therefore safe to use. Colors according to RAL: Pure White (9010), Golden Yellow (1004), Brown Beige (1011), Copper Brown (8004), Beige red (3012), Pastel Blue (5024), Pastel Green (6019), Pebble grey (7032), Slate Grey (7015), Jet Black (9005). Other colors should be checked in advance.

/ kg

6 May vary depending of porosity of substrate. Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Diamond Tools for Grinding Machines Diamond tools are used as expendables to grinding machines to take off the surface layer of concrete, stone, wood and other foundations. Diamond tools consist of a metal plate with soldered on it diamond or carbide segments. Tools specification consists of:

1. Segment form: R (rectangular), C (circle). Clarification: the more sharp edges there are in the segments, the rougher and the more aggressive (more productive) is surface grinding, and the more the segments hold against the load impact. The fewer edges, as for example in case of circle segments, the fewer scratches are left on the surface.

2. Bond type in the segment: S (soft bond for hard concrete), N (normal bond for medium concrete), H (hard bond for soft concrete). Clarification: the softer the concrete, the harder bond is recommended, and vice-versa. For very soft concrete and sand-cement coverings, tungsten carbide (TC) tools are recommended.

3. Segments quantity: number from “1” to “2”. Clarification: the smaller the total working area of segments, the more the pressure on the processed foundation, and consequently the more aggressive and productive the grinding, but the less the segments lifetime (fast wear).

4. Grain size in grit: number from “16” to “150”, which corresponds to the numbers: 16 grit – black, 30 grit – brown, 60 grit – grey, 100 grit – yellow, 150 grit – white. Clarification: the larger the diamond grain (the smaller the grit number), the more aggressive and productive is surface grinding.

The correct choice depends on:

1. Surface flatness – the choice on load impact. Rectangular segments are more preferable. 2. Porosity of concrete foundation – the choice of the number of segments. Larger amount of segments is more

preferable. 3. Hardness of concrete foundation – the choice of segment bond. Soft bond is more preferable for hard

foundations, and vice-verse. 4. Required surface roughness – the choice of segment form and grit. Circle segments with small grains 150 grit

are more preferable for even foundations. Diamond tools have 2 types of fastening, adapted for all trapezoid-form plates: three screwed holes, and additionally three plain holes for pins to fix on magnet tool discs. As an example, diamond tools are classified according to the number of segments and its form as following:

Number of segments / Segment Form

R (rectangular) C (circle) Price

«1»

«2»




out of 16

Diamond tools are classified according to grit and bond as following:

Diamond Tools for Grinding for GPM 240/400/500/750 Grit / Colour soft concrete normal concrete hard concrete Application

grit 16 / Black

RH 2-16

RN 1-16

RN 2-16

RS 1-16

RS 2-16 very coarse grinding

grit 30 / Brown

RH 2-30

RN 1-30

RN 2-30

RS 1-30

RS 2-30 coarse grinding

grit 60 / Grey

RH 2-60

RN 1-60

RN 2-60

RS 1-60

RS 2-60 medium grinding

grit 100 / Yellow

RH 2-100

CN 1-100

CN 2-100

CS 1-100

CS 2-100 fine grinding

grit 150 / White -

CN 1-150

CN 2-150

CS 1-150

CS 2-150 super-fine grinding

hard - "H" normal - "N" soft - "S"

Metal-Bond Type

Tungsten-carbide (TC) / Beige

for cement-sand coverings

Pads for Grinding Machines Pads are used as expendables for grinding and polishing machines for finish processing of concrete, stone, wooden and other surfaces after processing with diamond tools, by gradually increasing surface shine. Pads, abrasive cloth, felted circles, etc. are attached to the transitional tool disc of a grinding machine on an adhesive tape that provides an easy and quick tool changing. The larger the number, indicating pad or other tool number, the less is abrasive grit, and it corresponds to obtaining higher surface shine.

Specification Picture Price Polishing pad for concrete and stone 100 mm / 175 mm: 100/200/400/600/800/1500/3500




out of 16

Discs for Power Trowel Machines7 Discs are used as expendables for power trowel machines for initial trowelling of surface layer of concrete or sand-cement foundation. Discs of different size and form are produced of special cold-rolled steel for all existing types of power trowel machines.

Diameters: 610mm, 760mm, 800mm, 840 mm, 915mm, 945mm, 950mm, 980mm, 1080mm, 1200 mm

7 Due to continuous change in machines’ construction, fitness of discs to the machine should be double-checked. Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



out of 16

Blades for Power Trowel Machines8 Blades are used as expendables for power trowel machines for finish processing of upper level of fresh concrete or sand-cement surface. Blades are produced of special spring cold-rolled hardened steel. Blades have three modifications: finish, combo and float as well as different forms and sizes for all existing power trowel machines.

Specification: [blade length] – [blade width] / [fixture size]

Machine / Blades

Finish blades S230-120/16-16 S267-152/16-16 S355-152/16-16 S457-152/16-16

Weight, kg / 4 blades 2.30 3.75 4.50 6.50

Price, / 4 blades

ALLEN, USA 430 436; 900 446 (1200)

BARIKELL, Italy Moskito 60 MK8-75 4-90; MK8-90; MK8-90HCS 4-120; MK8-120

BARTELL, Canada B424 B430; BXR830 B436; TS78; BXR836 B446; TS96

BELLE, Great Britain Pro 600 Pro 900 Pro 1200

B-MAC, Belgium BM60/4 BM 955 BM1200

BTC, Italy BTC 424

DYNAPAC, Sweden BG21 BG92

ENAR, Spain Tifon 600; P600E Tifon 900 Tifon 1200

IMER, Italy Delta 60 Delta 120

KREBER, Poland K-600; K-600 R/4 K-750 K-446; K-446-2

MASALTA, China MT24-4 MT30-4 MT36-4 MT46-4

NTC, Czech Republic PT 600 PT 900 PT 1200

OSCAR, Turkey P600 P700; P750; P750 x 2 P900 P1200; P1200 x 2

SHATAL, Israel ST 62 ST92 ST-122

STONE, USA CF-24 CF-36; CF-364 CF-464

WACKER, Germany CT24 CT30 CT36 CT48

WEBER, Germany PG 55 PG 70

WHITEMAN, Canada C series M series B series

8 Due to continuous change in machines’ construction, the fitness of discs to the machine should be double-checked. Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com



catalogue stalats ab eng

Documents