catjan-14
DESCRIPTION
BOOKSTRANSCRIPT
AGRICULTURAL SCIENCES ANDAGRICULTURAL ENGINEERING
Rs. P.1. Afjal Ahmed, M. Khan : Capsule on General Agriculture 150.00
& Ramjee Lal Meena 1st Ed., 20142. Agriculture Question Bank with Answers, 10th Ed. 2013 325.003. Agricultural Engineering Question Bank with Answers
: Prep. by Dr. B. S. K. K.Vidyapeeth, College of Agricultural Engg. &
Tech., DAPOLI, 2nd Ed., Rep. 2013295.004. Ansari Irfan Ahamad : Objective Type Questions Bank on
Food Process Engineering and 225.00Technology, 2nd Ed., 2013
5. Ansari Irfan Ahamad: Theoretical concepts and Formula and Pramod Rai in Food Processing Engineering 175.00
1st Ed. 20106. Ansari Irfan Ahamad : Objective Type Questions in 175.00
Renewable Energy Sources, 1st Ed. 20127. Das. T. K. : Weed Science: Basics and 425.00
Applications, 2nd Ed., Rep., 20138. Deshmukh, Dubey etc. : Objective
Agronomy 1st Ed. 2013 100.009. Dhondyal, S. P. : Social Sciences Research and 125.00
Thesis Writing, 1st Ed., 200710. Dr. A. S. Pawar : Fundamentals of Wind Energy
Utilization, 1st Ed., 2010 150.0011. General Agriculture for I.C.A.R. Exams. 100.00
(For J.R.F., Ph.D., S.R.F. & A.R.S.) More than 2100 Solved Questions. (19th Ed., 2014)
12. Gupta S. N. : Question Bank of Horticulture, 195.004th Ed., 2013
13. Gupta S. N. : Instant Horticulture, 11th Ed., 2013 250.0014. Gupta S. N. : Instant Agriculture, 1st Ed., 2012150.0015. Garg and Chandra : Question Bank on Agricultural
& Food Engineering, 5th Ed., 2012185.0016. Garg and Chandra : Processing and Food Engg.
(Objective Q. and Answers) 1st Ed., 2012 225.0017. I. D. Tyagi : Biotechnology and Genetics 250.00
3rd Ed., 201318. I. D. Tyagi : Principles of Plant Breeding 250.00
1st Ed., 200919. Jaisingh : This is Organic Agriculture 1st Ed. 2005 150.0020. Kanwar Bhattarai : Seed Technology Processing, (HB)
& Mehta Storage and Marketing, 1st Ed., 2010 400.0021. Mahendra Pal : Basics of Agriculture 2nd Ed., 2009395.0022. Maliwal : Agronomy at a Glance Vol-I 240.00
Vol-II 240.00
23. Michael and Ojha : Principles of Agricultural Engg.Vol. I (6th Edition, Rep. 2013)395.00Vol. II (4th Edition, Rep. 2013)595.00
24. Mane, Ayare : Principles of Drip Irrigation System 120.00& Magar 2nd Ed., 2008
25. Mane & Ayare : Principles of Sprinkler Irrigation 175.002nd Ed., 2013
26. Maniknandan & : Indian Forestry : A Break Through 325.00Prabhu Approach To Forest Service
2nd Ed., 201327. M.S. Bhairamkar :Quantification of Variables and Various Scales
in Extension Eduction, 1st Ed. 2011130.0028. Nguyen, Singh : Globalization of Agriculture and
and Garg its Implications 1st Ed., 06 (HB) 2006295.0029. Nikhade, Rawat : Numerical Problems in Agricultural
& Victor Engineering 2nd, Ed., 2012 225.0030. Nguyen & Singh : Rice Production and Export in
India and Vietnam : Challenges and Prospects 1st Ed., 2008 (HB) 400.00
31. Pant, J. C. : Operations Research (Introduction to Optimisation) 7th Ed. 2013375.00
32. Prasad, Rajendra : Text Book of Rice Agronomy 225.001st Ed., 2008
33. Phirke P. S. : Processing and Conveying Equipment Design, 2nd Ed., 2009295.00
34. Ramana Rao : General Studies (for ARS & other Competitive Exams.) 11th Ed., 2013150.00
35. R.P. Singh, Jhamtani, : Revival of Indigenous Technical 350.00Dr. Premlata Singh, Knowhow in Agriculture (HB)Dr. G.A.K. Kumar 1st Ed., 2004
36. Ram Dutta : Agriculture Refresher, 225.002nd Rev. Ed., 2012
37. Rawat & Nikhade : Q. B. on Agricultural Engineering 195.002nd Ed.2013
38. Raju, K. S. : Prediction in Ungauged Basins for Sustainable Water Resources (HB)Planning & Management, 1st Ed., 06450.00
39. K. Sasikumar & : Agriculture Made Easy, 325.00V. Sarvanakumar 5th Ed. 2012
40. Sharma, S. K. : Objective Food Science 350.00& Kalwit 5th Rev. Ed., 2014
41. Sharma & Naidu : Science of Cocoa Processing 1st Ed., 2008 (HB) 275.00
42. Sharma Mukesh : Agricultural Tractor & Machinery295.00and Balyan 2nd Ed., 2011
43. Sharma & Mukesh : Farm Machinery Design (Principles 325.00
and Problems) 3rd Ed., 201344. Sharma & Mukesh : Design of
Agriculture Tractor 275.00(Principles and Problems) 2nd Ed., 2013
45. Sharma & Mukesh : Farmpower & Machinery Management
(Principles & Practices) 1st Ed. 2013295.0046. Shukhdev Mangaraj : Modified Atmosphere Packaging of
Fruits and Vegetables 1st Ed., 2013375.0047. Singh D. K. & : Objective Annotations Irrigation &
Ramanna Rao Drainage Engineering, 1st Ed., 2009 60.0048. Singh, G.N. and : Handbook of Farm Management
Dhondyal, S. P. 2nd Ed., 2013 100.0049. Singh, Jhamtani & : Training Management
Premlata Singh (A Hand Book) 1st Ed., 2008 125.0050. Srivastava etc. : Plastics in Agriculture 1st Ed. 150.0051. Srivastava & Ojha : Technology & Applications of Bio-Gas 195.00
2nd Ed. 201352. Srivastava, : Biomass, Briquetting & Applications
Ojha etc. 1st Ed., 1995 125.0053. Salaria, B. : A2A2ZZ Solutions Horticulture Solutions Horticulture
atat a Glance Vol.-a Glance Vol.-I, I, 450.00Fruits and Plantation Crops, 2nd Ed., 2013
54. Salaria : A2Z Solutions Horticulture at a Glance Vol. II, (Vegetables, Spices and Condiments) 450.001st Ed. 2013
55. Salaria :: A2A2ZZ Horticulture Horticulture atat a Glance Vol.–a Glance Vol.–III, III, 2nd Ed., 2013 2nd Ed., 2013 475.00475.00
56. Salaria : A2Z Solution Horticulture at a Glance, 1st Ed.09, Rev. Ed., 2011350.00
57. Salaria : A2Z Objective Horticulture Knowledge, 1st Ed., 2010 325.00
58. Salaria : A2Z Objective Agricultural KnowledgePart-I, 1st Ed., 2011 495.00Part-II, 1st. Ed.2011 495.00
59. Salaria : F.A.Qs In Horticulture (Frequently 295.00Asked Questions), 1st Ed. 2013
60. Salaria : A2Z Instant Objective Horticulture (Vol.-I) 325.00Fruits and Plantation Crops 1st Ed., 2013
61. Salaria : Instant Horticulture Solutions 325.00(1st Ed. 2013)
62. Sharma, S. M. : Vegetable Oils : Sources andEnhancement Research in India(Hard Bound) 1st Ed., 2003 595.00
63. S. N. Sharma : Innovation in Field Experiments—Planning
and Statistical Analysis 1st Ed., 2012175.0064. Shukla, B. D. : Drying and Dryers 1st Ed., 2004 (HB) 595.0065. Singh Anil : Encyclopedia Dictionary of Agriculture
1st Ed., 2011 HB 750.00 PB 495.00
66. Suresh Chandra : Agril. Processing and Food S. K. Goyal & Technology, 225.00 Durvesh Kumari 2nd Ed. 2012
67. Suresh Chandra : Food Processing and Technology & others (Q. B.) 1st Ed. 2010 175.00
68. Swati, Kirad : Post Harvest Handling of Fruits 150.00& Bagche Vegetables and Flowers
2nd Ed., 2013 69. Tiwari, R. Kumar : An outline on
Objective Entomology 250.00Lok Nath 2nd Ed., 2013
70. Tyagi I. D. : Modern Agriculture New Paradigm 150.001st Ed.,
71. Tyagi I. D. : vk/kqfud Ñf"k mRiknu 1st Ed., 2003 150.00(Modern Agricultural Production)
72. Tyagi. S.K. : Agricultural Information Data Book225.001st Ed., 2014
73. Vijay K. Kaushik : Beekeeping in India (A profitable Enterprise) 1st Ed., 2012 175.00
74. Vyas, A. K. : An Introduction to Agriculture 275.005th Ed., 2012
75. Singh, Murdia, : Question Bank on Dairy and Goyal Food Technology, 1st Ed., 2010150.00
*76. Kunte : Principles of Horticulture &Fruit Growing 10th Ed., 2005 240.00
*77. Yawalkar : Manures and Fertilizers 300.0011th Ed., 2011
*78. Yawalkar : Vegetable Crops of India 5th Ed.,2004200.00*79. Saxena : Entomology at a Glance, 4th Ed., Vol.-I 200.00
Vol.-II 200.00 *80. Tyagi : Plant Breeding and Genetics
at a Glance 2nd Ed., 125.00*81. HCL Gupta : Insecticides : Toxicology and Uses200.00*82. Langhans R. W. & : Plant Growth Chamber H.B. 595.00
Tibbitts, T. W.*83. Arun Katyayan : Fundamentals of Agriculture
3rd Ed., Vol-I, 6th Ed., 2013 280.00 Vol-II, 6th Ed., 2012320.00
*84. Somani : Soils and Fertilizers at a Glance 300.00
*85. Paul & Sharma : Objective Fundamentals for Professionals in Extension Education 1st Ed., 2006 220.00
CIVIL ENGINEERING1. Archna Bohra Gupta : Engineering
Mechanics 250.00& Vaishwanar 2nd Ed., 2013
2. Gupta, B. L. : Manual of Applied MechanicsLaboratory 2nd Ed., 1995 15.00
3. Gupta & : Concrete Technology, QuantitySubhash Chander Surveying & Valuation 275.00
2nd Ed. Rep. 20134. Gupta & : Hand Book for Civil Engineers
Subhash Chander (HB) 2nd Ed., Rep. 2013 325.005. Gupta & : Principles of Geoinformatics 325.00
Subhash Chander 5th Ed., 20116. Gupta, R. K. : Engineering for Rural Development150.00
1st Ed., 7. Gupta, R. K. : Civil Engineering Materials & 275.00
Const. Practices 4th Ed., 2014 8. Gupta & Gupta : Water Supply Handbook, Ist Ed., 2012 325.009. Subhash Chander : Dictionary of Civil Engineering 225.00
5th Rev. Rep., 201310. Lakshminarayanan : A Text Book of
Engineering Graphics& Vaishwanar 1st Angle Projection, Including Auto
CAD, 17th Ed., 2014 190.0011. Malhotra, M. M. : Design of Steel Structures 175.00
7th Rev. Ed. 201312. Pant, J. C. : Project Management CPM, PERT,
GERT, Scheduling with LinearProgramming 4th Ed. 2001 100.00
13. Ramu : Steel Tables, SI Units 50.003rd Rev. Ed., 2013
14. Raju, Sarkar & Dash : Integrated Water Resources Planning & Management 1st Ed., (HB) 375.00
15. Raju, K. S. : Predictions in Ungauged Basins for Sustainable Water Resources
Planning & Management (HB) 1st Ed. 2006 450.00
16. Sharma, V. D. : Fluid Pressometry 1st Ed. 1991 25.0017. Subhash Chander : Concrete Technology, 1st Ed., 75.0018. Subhash Chander : Basics of Civil Engineering (As per
RGPV, Bhopal), 1st Ed., 2008195.0019. Subhash Chander : Geotechnical and Foundation
Engineering, 3rd Ed., 2014 350.0020. Subhash Chander : Water Resources Systems 350.00
Rajesh Prasad 3rd Ed., Rep. 2013
21.Subhash Chander : Construction Management 295.00Systems, 2nd Ed., 2014
22. Vaishwanar : Theory of Structures 1st Ed. 225.0023. Vaishwanar : Analysis & Design of Structures450.00
M.M. Malhotra & 2nd Ed., 2013Subhash Chander
24. K. R. Chandhoke: Environmental Engineering and Disaster Management 1st Ed., 2012 275.00
*25. Gupta S. P. : Civil Engineering 320.00& Gupta S. S. (Through Objective Type Questions)
*26. Varyani U. H. : Biaxial Bending of Reinforced 175.00Concrete Members
*27. Varyani U. H. : Structural Design of Multi-StoreyedBuildings 2nd Ed. 2002 295.00
*28. Jai Krishna : Elements of Earthquake Engineering125.00 29. Chernigovskil : Application of Direction Blasting in
Mining and Civil Engineering 2nd. Rev. Ed. 275.00ELECTRICAL ENGINEERING
1. Indu, B. D. : Electrical Engineering Materials 95.003rd Ed. 2006
2. Jain, K. C. : Solved Problems in ElectricalEngineering, 2nd Ed., 2010 60.00
3. Jain, K. C. : Electrical Science, 5th Ed. Rep.2011 250.004. Jain, K. C. : Electrical Engg. & Electronics250.00
(As per Rajasthan Technical Univ., Syllabus) 4th Ed. 2011
5. Jain, K. C. : Fundamental of Electrical 250.00Engineering, 1st Ed., 2010
6. Jain’s : Dictionary of Electrical Engineering, 2nd Ed. 2014 (In Press)
7. Pant, J. C. : Operations Research (Introduction to Optimisation), 7th Ed. 2013375.00
9. Pauddar, C. M. : Elements of Power Electronics, 250.002nd Ed., 2013
*10. Schwarzenbach : Systems Modelling and Control 150.00
MECHANICAL ENGINEERING1. Archna Bohra Gupta : Engineering Mechanics 250.00
& Vaishwanar 2nd Ed., 2013
2. Agarwal, G. K. : Plant Layout and Materials 175.00Handling 1st Ed. Rep. 2012
3. Chitalae, A. K. : Text Book of Operations Research 65.004. Chauhan & : Management of Systems
Vaishwanar 150.005. Gupta O. P. : Mechanical Engineering Objective
Type Q & A, 3rd Ed., 2012 425.006. Jain, S. K. : Introduction to Metallurgical
Analysis (Reprinted 2004) 100.007. Khandwawala : Thermodynamic Approach for
Refrigeration and Airconditioning 1st Ed. 2011 275.00
8. Lakshminarayanan : Text Book of Machine Drawing & Mathur (With Computer Graphics and AutoCad)
(First Angle Projection) 14th Ed., 2013 275.00
9. Lakshminarayanan : Engineering Graphics& Vaishwanar (Including Auto CAD)
(First Angle Projection) 17th Ed., 2014 190.00
10. Mathur & Mehta: Thermal Engineering (SI Units)Vol. I, 3rd Ed. 2012 250.00Vol. II, 3rd Rev. Ed., 2012 225.00
11. Mathur & Mehta: Thermal Engineering3rd Ed. Rep. 2013 (Combined)425.00
12. Mathur & Mehta : Applied Thermodynamics 5th Ed. 02150.0013. Mathur & Mehta : Fluid Mechanics & Heat Transfer
3rd Ed., 2004 195.0014. Mathur & Mehta: Thermal Science & Engineering300.00
3rd Ed., 201315. Mathur & Mehta: Steam and Other Tables 30.00
(Including Mollier Chart) Revised & updated, 2013
16. Mathur & Mehta: Thermodynamics and Gas Tables(SI Units) 2nd Ed., 2012 40.00
17. Mathur & Mehta: Refrigerant and Psychrometric40.00Properties Tables and Charts(SI Units) 3rd Ed., 2013
18. M.L. Aggarwal : Design Data (for Mechanical Engineers) 125.00
1st Ed. 2013 19. Mathur & Mehta: Mechanics of Fluids, 5th Ed., 2013275.0020. Mathur, Mehta : Elements of Mechanical Engg.
& Tewari (Mechanical Technology) 325.00
13th Ed., 201321. Mathur & Mehta: Fundamental of Heat & Mass Transfer 250.00
2nd Ed., 201222. Mathur, Mehta, : Elements of Mechanical Engineering
Tewari & Vaishwanar (Thermodynamics & St. of Materials) 200.00(As per M.D. University, Rohtak, Haryana) 2nd Ed. 09
23. Mathur, Mehta : Mechanical Science & Vaishwanar 3rd Ed., 2013 425.00
24. Mathur & : Engineering Drawing and Graphics Vaishwanar (1st Angle Projection) 4th Ed., 2013350.00
25. Murty, R. L. : Introduction to Robotics 1st Ed. 199650.0026. NITS : Atlas for Mechanical Engineers 1st Ed.350.0027. Pant, J. C. : Operations Research (Introduction
to Optimisation) 7th Ed. 2013375.0028. Pant, J .C. : Project Management with CPM,
PERT, GERT and LinearProgramming 4th Ed., 2001 100.00
29. Sharma, V. D. : Fluid Pressrometry 50.0030. Vaishwanar : Fluid Power Engineering
3rd Ed., 2004 (with supplement) 150.0031. Singh, I. P. : Engg. Material Science
and Metallurgy 1st Ed., 2008 125.0032. Singh, I. P. : Material Science & Processes, 150.00
& S. Chander 2nd Ed., 200433. I. P. Singh & : Materials Science and Engineering295.00
Subhash Chander 11th Ed., 201334. Rajesh K. Prasad : Manufacturing Processes, 195.00
2nd Ed., 201435. Rajesh K. Prasad : Non-Conventional Energy Sources
and T. P. Ojha 4th Ed., 2014 250.0036. Rajesh K. Prasad : Production Management 225.00
Bijoya Prasad 2nd Ed., 201137. Vaishwanar : Dictionary of Mechanical Engg.,175.00
2nd Ed., 201238. Vaishwanar & : Manufacturing Technology
Rajesh Prasad 5th Ed., 2012 325.00 39. Vaishwanar : Mechanics of Solids 6th Ed., 2013375.00
*40. Whitney, Daniel : Experimental Mechanics of Fiber& Pipes Composite Materials 225.00
41. UPSC (IES) : Engineering Service Examination Solved Papers Mechanical Engg.,250.00 (Conventional type)
ELECTRONICS AND COMPUTER SCIENCE1. Jain, K. C. : Elements of Electrical Engineering
and Electronics, 3rd Ed., 2003 95.002. Jain, K. C. : Electronics and Instrumentation230.00
2nd Ed., (Reprint 2013)3. Deva Kumar, J : Fundamental of Data Structures, 150.00
1st Ed.20104. Gupta : Fundamentals of Digital Electronics
1st Edition, Rep. 2010 125.005. Phatak A. P. : Telecommunications Technology 175.00
2nd Ed., 2009*6. Buahshaum : Encyclopedia of Integrated Circuits395.00
CHEMISTRY1. Banerjee & Jain : (Practicals in Engineering Chemistry)
Hand Book of Technical Analysis3rd Edition 2009 50.00
2. Jain, S .K. : An Introduction to MetallurgicalAnalysis, Reprinted, 1999 100.00
3. Mehta, V. P. : Polytechnic Chemistry, 12th Ed., 2013 175.00
4. Mehta, V.P., S.B. Jha : Engg. Applied Chemistry, & Sama Jain 1st Ed. 2008 150.00
5. Saxena Sanjay : Engineering Chemistry (RGPV) Bhopal, 2nd Ed., 2008150.00
6. Saxena Sanjay : Engineering Chemistry 150.00(MDU univ.) and K.U. 1st Ed., 2011
7. Shukla : Chemistry 2nd Ed., 2002 95.008. S. Chander & Jha :Engineering Physics and Chemistry 450.00
4th Ed., Rep. 20139. Shashi Bhushan Jha : Engineering Chemistry 1st Ed., 2010 195.00
(As per JNTU, Hyderabad)PHYSICS
1. Jain, K. C. : Text Book of Physics, 2nd Ed., 199550.002. S. Chander and Jha : Engineering
Physics and Chemistry 450.005th Ed., 2013
3. S. B. Jha & Gupta :Engineering Physics (RTU) 1st Ed., 09 225.004. S. B. Jha & Rao : Engineering Applied Physics (JNTU) 225.00
2nd Ed., 2010
ENGINEERING MATHEMATICS1. Suryanaryana, P. :Engineering Mathematics 2nd 2010 150.002. Bali, R. C. : Mathematics I, 2nd Ed., 2004 75.003. Bali, R. C. : Mathematics II 50.004. Jha : Statistical Tables 2nd Ed. 2010 40.005. Gupta O. P. : Engineering Mathematics
Solved Problems 2nd Ed., 2013295.006. Karaiya : Engineering Mathematics
4th Ed., Rep. 2013 250.00
BUSINESS AND MANAGEMENT1. Anshooda : Engg. Management 1st Ed., 2009195.002. Chauhan & : Management of Systems 150.00
Vaishwanar 6th Ed. 20043. Chauhan : Engineering Management, 10th Ed., 2013 295.004. R.P. Singh etc. : Training Management Handbook 125.005. Pant, J. C. : Project Management CPM PERT GERT
and Linear programming 4th Ed. 100.006. Dhyani, Dash : Grass roots of Entrepreneurship 80.00
and Kumar 1st Ed.,7. K. C. Gupta : Introduction to Entrepreneurship 150.00
1st Ed., 20148. Prakash, Nirupma : Conflict Resolution : Peace &
and Motilal Dash Development (HB) 1st Ed. 300.00
9. Meenakshi Raman : Communicating at Work: Shifting Paradigms and Emerging Trends,
1st Ed., 05 400.0010. Rajesh K. Prasad : Production Management 225.00
Bijoya Prasad 2nd Ed., 201111. Murthy : Quizzes 2nd Ed., 2012 100.0012. Meenakshi Raman : Soft Skills : Cornerstone of Professional 595.00
Success (HB) 1st Ed., 2010
ENGLISH1. Shiv Kumar Tandon : English for
Engineers, 4th Ed. 2010 125.002. Girdhar A. P. : English Grammar and Composition,
1st Ed., 2010 (Made-Easy) 125.003. Meenakshi Raman : Communicating at Work: Shifting
Paradigms and Emerging Trends 1st Ed., 05 400.00
4. Meenakshi Raman : Soft Skills : Cornerstone of Professional Success (HB) 595.00
5. Pushp Lata, Devika : Interfacing ELT with Culture and 450.00and G.S. Chauhan Technology (Direction for New Classroom)
6. Pushp Lata, Devika : Integrating Web 2.0 Technology 375.00and G.S. Chauhan and Culture in ELT
7. BITS SAT 2014 295.00
HEALTH CARE AND RELIGION1. Dr. Gopal Das Tripathi : Essential of School Health Care
2nd Ed., 2004 95.002. Modak & Pareek : Exercises for Diabetics &
Cardiovascular Diseases and Obesity 125.003. Nirupama Prakash, : Ageing: Social Issues
Rashmi Kapoor & 1st Ed., 2010 (H.B.) 795.00Bandana Sachdev
4. mik/;k; fuHkZ; lkxjth egkjkt % jkf=k Hkkstu ,d oSKkfud n`f"V 31.00"k"Ve laLdj.k
5. mik/;k; fuHkZ; lkxjth egkjkt % ?kw¡V&?kw¡V esa ekSr ¼"k"Ve laLdj.k½ 30.00
6. mik/;k; fuHkZ; lkxjth egkjkt % iwtu dk oSKkfud vuq'khyu 50.00¼r`rh; laLdj.k½
7. mik/;k; fuHkZ; lkxjth egkjkt % nw/k&ngh dk oSKkfud fo'ys"k.k15.00
8. mik/;k; fuHkZ; lkxjth egkjkt % miokl ,d oSKkfud n`f"V 25.009. mik/;k; fuHkZ; lkxjth egkjkt % riksou ns'kuk25.00
10. iw- vkf;Zdk Jh ftunsoh ekrkth % ,d o`{k ds nks Qy ¼iki vkSj iq.;½ 30.00
11. iw- vkf;Zdk Jh ftunsoh ekrkth % jRu=k; 30.0012. Hkxoku egkohj ,oa mudk rRo n'kZu (HB) 695.0013. fljh Hkwoy; 150.0014. rhu yksdiwtk 100.0015. iw- vkf;Zdk Jh ftunsoh ekrkth % b"Vksins'k 25.0016. iw- vkf;Zdk Jh ftunsoh ekrkth% ukfVdk izcks/kuh 25.00
METALLURGICAL ENGINEERING1. Jain, S.K. : An Introduction to Metallurgical
Analysis Reprinted, 2012 125.002. Johnson Weeks : Metallurgy 100.00
*3. Panigrahi : Testing, Evaluation and Measurements in Metal Castings195.00
*4. Ray : Extraction of Non-Ferrous Metals295.005. I. P. Singh etc. : Materials Science and Engineering 295.00
11th Edition 2013
DICTIONARIES AND REFERENCE BOOKS1. Jain’s Dictionary of Civil Engineering 5th Rev. Ed., 2013 225.002. Jain’s Dictionary of Electrical Engineering In Press
2nd Ed., 2014 3. Jain’s Dictionary of Mechanical Engg., 2nd Ed., 2012175.004. Jain’s Dictionary of Electronics, 1st Ed., 2012 In Press5. Jain’s Dictionary of Energy In Press6. Jain’s Dictionary of Environment In Press7. Jain’s Dictionary of Computer Science In Press
ENVIRONMENTAL SCIENCE1. Chandoke. K.R. : Basic Concepts of
Disaster Management, 895.001st Ed., 2014
2. Chandoke. K.R. : Environmental Engineering and 275.00 Disaster Management (As per RTU, Kota) 1st Ed., 2012
2. Chauhan, A. S. : Environmental Studies, 3rd Ed., 2009 160.003. Chauhan, A. S. : Environmental Science, 2nd Ed., 2012 225.005. Chauhan A. S. : Int. to Energy, Environment Ethics
& Society 1st Ed., 2009 (According to RGPV syllabus) 130.00
6. Muralikrishna : Our Environment 50.007. Muralikrishna : An Int. to ISO 14000 50.008. Rama Raju & : Environmental Sanitation 50.00
Muralikrishna9. Muralikrishna : A Treatise on Rural, Municipal
& Industrial Water Management 50.00*10. Slaymaker : Physical Geography and Global
& Spencer Environmental Change 275.00
RECOMMENDED BOOKS AS PER NEW SYLLABUSEFFECTIVE SUMMER 2005, SECTION-A (DIPLOMA)
1. R. S. Vaishwanar : Fundamentals of Design and
Manufacturing, 6th Ed., 2013Rs. 200.002. I. P. Singh, : Material Science and EngineeringRs. 295.00
Subhash Chander 11th Ed., Rep. 2013
3. A. S. Chauhan : Society and Environment, Rs. 225.0020th Rev. Ed., 2014
4. Chandwani, Jain : Computing and Informatics Rs. 170.00Chaudhari 3rd Ed., 2013
RECOMMENDED BOOKS AS PER NEW SYLLABUSEFFECTIVE SUMMER 2005, SECTION-A (NON-DIPLOMA)
1. R. S. Vaishwanar : Fundamentals of Design and Manufacturing, 6th Ed., 2013200.00
2. I. P. Singh, : Material Science and Engineering295.00Subhash Chander 11th Ed., Rep. 2013
3. A. S. Chauhan : Society and Environment, 225.0020th Rev. Ed., 2014
4. Chandwani, Jain : Computing and Informatics 170.00Chaudhari 3rd Ed., Rep. 2013
5. Mathur & : Engineering Drawing & Graphics350.00Vaishwanar 4th Ed., (Rep. 2013)
6. Mathur, Mehta & : Mechanical Science 425.00Vaishwanar 3rd Ed., Rep. 2013
7. K. C. Jain : Electrical Science, 5th Ed., Rep. 2011 250.008. K. C. Jain : Electronics & Instrumentation 230.00
2nd Ed., Rep. 20139. S. Chander : Engineering Physics & Chemistry450.00
Sashi Bhushan Jha 5th Ed., (Rep. 2013)
10. Karaiya : Engineering Mathematics, 250.005th Ed., Rep. 2013
A.M.I.E. SECTION (B) EFFECTIVE SUMMER 2005(COMPULSORY SUBJECTS FOR ALL BRANCHES)
1. A.S. Chauhan : Engineering Management 295.00 10th Ed., 2013
RECOMMENDED TEXT BOOKS AS PER SYLLABUS (EFFECTIVE SUMMER 2005)
MECHANICAL ENGINEERING 1. R.S. Vaishwanar : Mechanics of Solids (MC 403) 375.00
6th Ed., 20132. Mathur and Mehta : Mechanics of
Fluids (MC 404) 275.005th Ed., 2013
3. Mathur and Mehta: Thermal Science and Engineering 325.00(MC 405) 3rd Ed., 2013
4. R.S. Vaishwanar : Manufacturing Technology 325.00and R. K. Prasad (MC 406) 5th Ed., 2012
5. J. C. Pant : Optimisation-Theory and 375.00Applications (MC 422) 7th Ed., 2012
6. Rajesh Prasad and : Non-Conventional Energy Sources 250.00T. P. Ojha (MC-413) 4th Ed., 2014
7. Rajesh Prasad & : Production Management (MC-435) 225.00Bijoya Prasad 2nd Ed., 2011
8. Khandwawala : Thermodynamics Approach for 275.00Refrigeration and Airconditioning
(MC-411) 1st Ed., 2011
CIVIL ENGINEERING1. R. K. Gupta : Civil Engineering Materials 275.00
and Construction Practices (CV-403) 4th Ed., 2014
2. Subhash Chander : Geotechnical and Foundation 350.00Engineering (CV-404) 4th Ed., 2014
3. Subhash Chander : Water Resources Systems and Rajesh Prasad (CV-405) 3rd Ed., 2013 350.00
4. R. K. Gupta and : Principal of Geoinformatics 325.00Subhash Chander (CV-406) 5th Ed., 2011
5. R .S. Vaishwanar : Analysis and Design of Structures 450.00Subhash Chander (CV-407) 2nd Ed., 2013
6. Subhash Chander : Construction Management System 295.002nd Ed., 2014
7. K.A. Chandoke : Principles of Environmental (In press)Engg., 1st Ed., 2014
ELECTRICAL ENGINEERING1. Pauddar : Elements of Power Electronics, 250.00
2nd Ed., 2013*2. Jairath : Problems and Solutions of 250.00
Control Systems 4th Ed.
COMPUTER SCIENCE AND ENGINEERING1. J. D. Kumar : Fund. of Data Structures, 2nd Ed., 2010 150.002. Sanjay Gupta : System Analysis and Design (In Press)
1st Ed., 2014
SOLVED AND UNSOLVED PAPERSSEC. A (DIPLOMA STREAM)
1. Question Papers Diploma (With Syllabus) 100.002. Fundaments of Design and Manufacturing (AD-301) 130.003. Materials Science and Engineering (AD-302) 130.004. Computing and Informatics (AD-303) 130.005. Society and Environment (AD-304) 130.00
SOLVED AND UNSOLVED PAPERS SEC. A (NON-DIPLOMA STREAM)
1. Question Papers Set (With Syllabus) 300.002. Fundamentals of Design and Manufacturing (AN-201)130.003. Materials Science and Engineering (AN-202) 130.004. Computing and Informatics (AN-203) 130.005. Society and Environment (AN-204) 130.006. Mechanical Science (AN-205) 250.007. Engineering Physics and Chemistry (AN-206) 230.00
8. Engineering Drawing and Graphics (AN-207) 220.009. Electronics and Instrumentation (AN-208) 230.00
10. Engineering Mathematics (AN-209) 240.0011. Electrical Science (AN-210) 170.00
A.M.I.E. SECTION (B) COMPULSORY FOR ALL BRANCHES EFFECTIVE SUMMER 2005
1. Engineering Management (IC-402) 200.00CIVIL ENGINEERING SECTION (B)SOLVED AND UNSOLVED PAPERS
1. Question Papers Set (With Syllabus) 300.002. Civil Engineering Materials and
Construction Practices (CV-403) 170.003. Geotechnical and Foundation Engineering (CV-404) 200.004. Water Resources Systems (CV-405) 230.005. Principles of Geoinformatics (CV-406) 200.006. Analysis and Design of Structures (CV-407) 250.007. Principles of Env. Engineering (CV-421) 220.008. Environment Engg. Process and Management (CV 422)200.009. Transportation Engineering (CV-431) 230.00
10. Traffic & Transport Planning (CV-432) 230.0011. Town Planning and Rural Dev. 170.00 12. Design of Water and Waste Water Treatment (CV 424,434)200.0013. Design of RCC and Prestressed Concrete Structures (CV412) 170.0014. Air Pollution and Its Control (CV423) 200.0015. Waste Management and Environ. Impact Assessment (CV-425) 200.0016. Construction Management Systems 250.00
MECHANICAL ENGINEERING SECTION (B)SOLVED AND UNSOLVED PAPERS
1. Question Papers Set (With Syllabus) 300.002. Mechanics of Solids (MC-403) 240.003. Mechanics of Fluids (MC-404) 200.004. Thermal Sciences and Engineering (MC-405) 200.005. Manufacturing Technology (MC-406) 170.006. Design of Machine Elements (MC-407) 250.007. Refrigeration and Airconditioning (MC-411) 180.008. Internal Combustion Engines (MC-414) 180.009. Power Plant Engineering (MC-412) 200.00
10. Non-Conventional Energy Systems (MC-413) 200.0011. Turbomachinery (MC-415) 220.0012. Design of Mechanical Systems (MC-421) 230.0013. Manufacturing Science (MC-431) 200.00
14. Computer Aided Manufacturing (MC-432) 170.0015. Tool and Die Design (MC-433) 180.0016. Manufacturing Automation (MC-434) 170.0017. Production Management (MC-435) 200.00
ELECTRICAL ENGINEERING SECTION (B)SOLVED AND UNSOLVED PAPERS
1. Question Papers Set (With Syllabus) 300.002. Power Systems (EL-403) 170.003. Circuit and Field Theory (EL-404) 180.004. Electrical Machines (EL-405) 170.005. Measurement and Control (EL-406) 180.006. Design of Electrical Systems (EL-407) 170.007. Energy Systems (EL-411) 170.008. High Voltage Engineering and Power Apparatus (EL-413)170.009. Power Electronics (EL-412, 422) 230.00
10. Microprocessor and Microcontrollers (EL-415, 425, 435)170.0011. Power Systems Performance (EL-414) 250.0012. Electrical Drives (EL-423) 250.0013. Electrical Power Utilisation (EL-424) 200.0014. Advance Aspects of Electrical Machines (EL 421) 250.00
ELECTRONICS AND COMMUNICATIONENGINEERING SECTION (B)
1. Question Papers Set (With Syllabus) 300.002. Communication Engineering (EC-403) 210.003. Circuit Theory and Control (EC-404) 200.004. Microprocessor and Microcontrollers (EC-405) 170.005. Electronic Circuits (EC-406) 210.006. Design of Electronic Devices and Circuits (EC-407) 200.007. Broadcast & Television Engg. (EC-411) 200.008. Radar and Antenna Engg. (EC-412) 200.009. Microwave Engg. (EC-413) 200.00
10. Optical & Satellite Communication (EC-414) 250.0011. Pulse and Digital Circuits (EC-422) 180.0012. Digital Hardware Design (EC-421) 200.0013. Solid State Physics & Semiconductor Devices (EC-424)230.0014. Software Engineering (EC-425) 180.0015. Computer Networks and Communications (EC-415) 180.0016. Sensors & Transducers (EC-431) 220.0017. Control Systems EC-435) 200.0018. Industrial Inst. and Control (EC-432) 250.0019. I. C. Design Techniques (EC-423) 200.0020. Biomedical Electronics (EC-433) 250.00
COMPUTER SCIENCE AND ENGINEERING SECTION (B)
1. Question Paper Set (With Syllabus) 300.002. Data Structures (CP-403) 200.003. Programming Languages (CP-404) 200.004. Pulse and Digital Circuits (CP-405) 180.005. Computer Architecture (CP-406) 170.006. System Analysis & Design (CP-407) 170.007. Computer Networks (CP-412, 422) 170.008. Database Management Systems (CP-415) 200.009. Microprocessor and Microcontrollers (CP-425) 170.00
10. Software Engineering (CP-435) 180.0011. Operating Systems (CP 413) 170.00
BOOKS UNDER PREPARATION1. Jain's : Dictionary of Energy In press2. Jain's : Dictionary of Environment In press4. Rajesh Prasad : Design of Machine Elements In press
M/s JAIN BROTHERS16/873, East Park Road, Karol Bagh,
Near Dr. N.C. Joshi Hospital, New Delhi-110 005Phones: (011) 23618426, 45097398, Fax: 23638444
E-mail: [email protected]: www.thejainbrothers.comFor South India Write to:-
M/s SUNIL BOOK SERVICEFatima Nagar, Opp. Andhra Bank
Kazipet-506 004, (ANDHRA PRADESH)Phone: 0870-2459617, Mobile: 9390115435
E-mail: [email protected]
Prices are Subject to Change Without Notice Send your valuable orders along with
M. O. or Draft as advance
Note:- Bold items indicate new title or new edition.
