cbc 1 hydraulic catalogue gb.pdf

40
ANNO 1978 GB DISMOUNTING & HYDRAULIC TOOLS WWW.BEGA.NL

Upload: engr-piagola

Post on 03-Jan-2016

58 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: CBC 1 HYDRAULIC CATALOGUE GB.pdf

ANNO 1978

GB

DISMOUNTING & HYDRAULIC TOOLS

WWW.BEGA.NL

Page 2: CBC 1 HYDRAULIC CATALOGUE GB.pdf
Page 3: CBC 1 HYDRAULIC CATALOGUE GB.pdf

ANNO 1978

MO

NTA

G

E BEW

AK

ING

DEMONTAGE

SPECIAL TOOLS

Professional solutions for reliable rotation in maintenanceand production

Dear reader,

We're delighted to be able to present to you our Dismounting & Hydraulics catalogue. It contains our BETEX® Dismounting & Hydraulics programme for maintenance (MRO) and production (OEM).

About BegaWe develop, produce and supply tools for monitoring, assembling, dismantling and lubricating transmission parts. In particular for bearings, the heart of all rotating equipment.

BETEX® is a registered trademark of Bega International bv and stands for quality and reliability.

We also supply: • MOUNTING TOOLS • MONITORING AND CONTROL SYSTEMS • PERMA AUTOMATIC LUBRICATION SYSTEMS • POWER TEAM HYDRAULICS

All products are tested and CE certified. Bega is VCA certified. We carry out electrical tests in compliance with NEN 3140.Please do not hesitate to contact our Sales department or one of our dealers. We are happy to be of service.

Visit www.bega.nl for our complete range

Bega Special Tools, Schorsweg 15, NL-8171 ME Vaassen, The Netherlands T + 31 578 668000 F + 31 578 668080 [email protected] www.bega.nl

© Bega International BV. We reserve the right to alter technical specifications without prior notice.

Page 4: CBC 1 HYDRAULIC CATALOGUE GB.pdf
Page 5: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

DISMOUNTING & HYDRAULIC TOOLS

INDEX

BETEX MSP 2/3-arm mechanical pullers, self-centering 2

BETEX KZZ key-drawer for professional removal of keys 3

BETEX Mechanical pullers (inner and outer pulling) 4-9

BETEX HP 2/3-arm hydraulic pullers with integrated pump and cylinder 10

BETEX HSP 2/3-arm hydraulic pullers, self-centering, with integrated pump and cylinder 11

BETEX HXP 2/3-arm hydraulic pullers, self-centering, with separate handpump 12

BETEX HPP hydraulic push puller, mounting (pushing), inner and outer pulling 13

BETEX Accessory sets, Bearing splitters for HP, HSP, HXP, HPP 14

BETEX Accessory sets, Tri-section plates for HP, HSP, HXP, HPP 15

BETEX Mobipuller, mobile hydraulic puller 25t and 50t 16-17

BETEX 50 HXPM mobile 2/3-arm hydraulic puller, self-centering, 50t 18-19

BETEX Mobilift workbench 20

BETEX Shop presses, 10t, 25t 21

BETEX Cylinders, SSS, single acting spring return 22

BETEX Cylinders, SCS, shorty, flat, compact 23

BETEX Cylinders, SLS, shorty, flat, compact 24

BETEX Cylinders, SHS, center hole cylinders 25

BETEX Cylinders, DAC/CJ, double acting, low-height jacks 26

BETEX Cylinders, SSA, aluminium cylinders 27

BETEX Heavy duty handpumps, PB series 28

BETEX Aluminium handpumps, AHP series 29

BETEX Hydraulic spreaders for lifting and separating 30

BETEX Portable powerkits for maintenance jobs 31

BETEX Toe jacks 32

BETEX Accessories: hoses, gauges, adapters, valves 33

BETEX Accessories: connectors, nipples, adapters 34

01

Page 6: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS BETEX MSP 2/3-arm pullers, self-centering

02

Ergonomic design, easily operated by one person!

• Practical!Self centering 2 or 3-arm puller with self-lockingsystem.Easy to convert and easy to use in every position.

• Safe!The arms adjust themselves simultaneously, eitherinwards or outwards. Self-locking system guaranteesarms neither bend nor deflect.

• Economical!2- or 3-arm combination puller. Two pullers for the priceof one.

• Strong!The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.

Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled. • Work efficient and save time.

2, 3, 5, 8 and 10 ton capacity!

Safe and easy dismounting of bearings, couplings, rings etc.

Type

MSP 120MSP 180MSP 270MSP 300MSP 380

798250798300798350798400798450

235810

80120160210250

120180270300380

86111314

67101410

1515252729

1.62.34.36.19.6

Art.no. Cap. ton Max. shaftlength mm

Max. spread mm

Amm

Bmm

Cmm

WeightKg

BETEX MSP 2/3 Mechanical self-centering pullers

Page 7: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

KZZ KEY-DRAWER

03

For professional removal of keys. The Betex KZZ Key-drawer (Item No. 4900011) is used for the safe removal of keys from the shafts of any type of machine, motor, blower, compressor, etc. For keys from 5 mm to 35 mm in width.

Safe!You no longer need a hammer and chisel.

Advantages• Safe and fast removal. • Perpendicular removal.• No damage to shafts or keys.• Shafts remain straight.• Saves time, labour and costs.• Jaws are made from specially tempered steel.• Screw has left and right trapezium thread.

Easy to use1. Turn wheel (A) to move the jaws (1) up or down

so that they are aligned with housing (2). 2. Turn wheel (B) to fit the size of the key allowing

± 1 mm space.3. Turn wheel (B) hand tight to secure the key with

the jaws. 4. Then turn wheel (A) to extract the key

perpendicularly. 5. Turn wheel (A) to move the jaws down; turn

wheel (B) to open the jaws and free the key.

B 1 1 2 A

Page 8: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

04

BETEX 46Simple, handy 2-arm puller for parts gripped externally like pulleys,bearings, rings, etc. Suitable for removing fans from electric motorsDuring operation the arms can not slip because they are pressed against the cross bar.The higher the necessary pulling force, the stronger the arms are pressed against thecross bar. The one-hand operation of the puller permits easy use even under unfavourable conditions. A spring inside the housing guarantees a continual clamping of the forged alloy steel arms.

BETEX 47Patented special 2-arm bearing pullersThis bearing puller is particularly suitable for extracting bearings, bearingrings etc. that fitflushly with other parts. This system is generally applied when dismantling bearings fromanchors, pump shafts etc.

BETEX 48/492/2 bearing splitters and pullersBetex no. 48/49 is designed for dismantling flush-fitting bearings andother parts where an ordinary puller would be unable to get a proper grip. Suitable for various applications.

Type

47-10047-20047-300

Max. diam.mm

4590150

Max. shaftlength mm

65100150

BETEX 47 is available in 3 types

Type

46-20046-00046-01046-020

Max. diam.mm

6075110220

Max. shaftlength mm

4060100200

BETEX 46 is available in 4 types

Type

48-06048-07548-11548-15048-210

Max. diam.mm

6075115150210

Counter support

standard with extension49-10049-10049-20049-30049-400

Max. shaft length mm

150150200300300

250250300400400

BETEX 48 is available in 5 typesBETEX 49 is available in 4 types

Page 9: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

05

BETEX 52Patented self-centering 3-arm pullers (mechanical and hydraulic) for diameterØ40 mm till Ø640 mmThe 3 arms of these pullers adjust themselves simultaneously and symmetrically,inwards or outwards. There is no possibility of the arms bending or deflecting.Hydraulic screws with a 20 ton capacity are available for use in combination with thetwo largest pullers. The thread of the screws is in no way affected by the building upof hydraulic pressure, thus keeping wear and tear to the screws down to a minimum.

BETEX 54Patented 2-arm pullers for diameter Ø40 mm till Ø350 mmThis 2-arm puller is extremely well-suited to applications involving the extraction ofbearing-rings, innerrings (NU-NJ). Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts.

Type Max. diam. mm

Max. shaft length mm

Type Max. diam. mm standard with extension with extra

extension

52-08552-13052-23052-295

52-390/394*52-640/644*

85130230295390640

65105150235270300

54-10054-20054-30054-40054-50054-600

80120160200250350

100125150175200250

200200250250300300

250250300300400400

BETEX 52 with mechanical screw isavailable in 6 types

BETEX 54 with standard arm-lenght is available in 6 types

Maximum shaft length mm

* these types may be converted into hydraulic tools simplyby replacing the mechanical screw and the screw-bushwith a 20 ton mechanical hydraulic screw.

Page 10: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

06

BETEX 56Internal 4-arm bearing pullers with interchangeable claws (in case)for total 66 bearings till Ø105 mmThis 4-arm bearing puller has been specially developed to extract ball-bearings from casings and shafts using a single action. This concerns the 6000, 6200, 6300 and 6400 series. 66 different ball-bearings can be removed with these three sets of pullers.

BETEX 44Hydraulic 8/15 tons mini-pressWhen using mechanical screws, much of the force is lost as a result of the friction causedby the thread. This minipress administers a shock to the part which is to be extracted. Thisenables optimal use to be made of BETEX pullers 52 and 54, without loss of force or wearand tear to screws. Note*: may be used from 49-200, 52-230 and 54-300 and upwards.

* application: heavy duty pullers, BETEX 49-200, 52-230 en 54-300 upwards * height: 35 mm

BETEX 625/630Shaft protector sets for shaft centers and hollow shaftsThese shaft protectors are indispensable between shaft and bearing puller while dismantling bearings, couplings etc. There are two types: 625 for protecting shaft centers and 630 for hollow shafts.Use of shaft protectors prevents distortion to the shaft centers and the screw.

Type

44-08044-150

Capacityton

815

Strokemm

710

Betex 44 is available in 2 types

BETEX 625 consists of a 6-piece set'D' min. = Ø 19 mm 'H' min. = Ø 16 mm'D' max. = Ø 38 mm 'H' max. = Ø 19 mmBETEX 630 'S' consists of a 11-piece set'Db' min. = Ø 19 mm 'Du' min. = Ø 25 mm 'Db' max. = Ø 51 mm 'Du' max. = Ø 64 mmBETEX 630 'T' consists of a 6-piece set'Db' min. = Ø 54 mm 'Du' min. = Ø 67 mm'Db' max. = Ø 76 mm 'Du' max. = Ø 89 mm

'Du'

'Db'

'H'

'D'

Set Max. shaftlength mm

Claws (4 per set)

No of bearings

56-02056-12056-220

Set

56-02056-12056-220

6590150

Ball-bearing

6000

6004 t/m 60066007 t/m 6020

6021

3 sets5 sets5 sets

Ball-bearing

6200

6200 62056206 62126213 6219

123024

Ball-bearing

6300

6300 63026303 63086309 6319

Ball-bearing

6400

-6403 64056406 6412

BETEX 56 is available in 3 sets

Page 11: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

07

Countersupport type

Suitable forexpanders

Expander For diametermm

For max.depth mm

62-100

62-200

62-200/62-300

62-004➔62-030

62-040➔62-070

62-070➔62-0125

62-00462-00762-01062-01462-02062-03062-04062-05062-06062-07062-08062-010062-0125

4-77-1010-1414-2020-3030-4040-5050-6060-7070-8080-100100-125125-150

35353545509095959595140140140

***********************

****************************************

BETEX 62 is available in 3 setsThe two sets together come in a free carrying case

BETEX 62Internal expander puller up to a bore of Ø 150 mmThis special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions,e.g. in ‘blind holes’. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc.Bearings, bushes, sealings etc. are extracted effortlessly.

Smaller, larger and longer sizes are available on request.

= set 1 62-101= set 2 62-201= set 3 62-301= combination set 62-105, including free carrying case

**********

BETEX 62-9 Slide hammer puller Used in combination with the internal puller.Slide hammer weight: 0,9 kg2 sizes with strokes of 90 mm and 300 mm2 connecting threads (M10 and M14x1,5) The advantage of the slide hammer is thatit can be used independent of any supporting face. After positioning the internal puller the slide hammer is connected through the hexagon adaptor.We recommend: Up to bore-diameter 39,5 mm Nr. 62-9092Up to bore-diameter 79,5 mm Nr. 62-9302

Page 12: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

08

BETEX TRACTA 63, 64These systems are unique and suitable for difficult dismounting jobs of roller bearings.

Advantages: • For all kinds of roller bearings • Shaft Ø 10 mm up to Ø 100 mm, larger sizes on request• Dismounting from house and shaft in one act • Also for flush fit bearings • Unlimited shaft lengths through extensions • 360°C grip over full bearing • Hydraulic type on request • Suitable for serial dismounting• Prevents damage to bearing, bearing house and shaft!

TRACTA 63 TRACTA 64

Type Shaft diam. mm

Outside diam.mm

Max stroke mm

Max shaft lengthmm

63-10063-20064-40064-50064-60064-70063-800

10,518

30,5466677100

26356075100125140

6264788092120150

95100135150170205240

165180235250270305390

BETEX TRACTA 63 and 64

Max shaft length mmwith extra extension

Larger models on request

Page 13: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MECHANICAL PULLERS

09

Collets for BETEX 63 and 64

There are 4 different pulling principles that can be applied, depending on bearing type.To define the correct collet the following is mandatory:

Principle 1

Principle 2

Principle 3

Principle 4

Principle 4: grip inside or behind bearing inner ring, or behind bearing outside ring.

Example: cylindrical roller bearing, lowest innerring of the ball bearings,outside ring of the needle roller bearings, spherical roller bearings, NU-,NJ-bearing bushes, ABS-rings, bushes, gear wheels.

Principle 3: grip on bearing inner ring.

Example: tapered roller bearings.

Principle 2: grip on rollers, independent of number of rolls. Also when bearing isflush fit.

Example: wheel bearings, tapered bearings.

Principle 1: grip on inner bearing ring. Bearing is dismantled in one act, from shaftand bearing house.

Example: self aligning ball bearings, four point bearings and ballbearings with split innering.

Page 14: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

HYDRAULIC PULLERSBETEX HP 2/3-arm pullers, with integrated pump and cylinder

10

• Multifunctional: These HP-pullers are ideal for pulling a wide variety ofparts, including bearings, bushings, wheels, gears andpulleys. Applications for HP-pullers will be found inmotor repair shops, service companies, maintenanceshops, industry, mining, paper mills, chemical plants,shipping, offshore, etc.

• Compact:The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose orpuller.

• Strong: The harder the force, the tighter the jaws grip.The arms cannot bend or deflect.

• Economical:2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!

• Safe: The improved integral safety release valve preventsoverloading and ensures that you will never exceed themaximum power capacity.

• Versatile: Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.

4, 6, 8, 12, 20 and 30 ton capacity!

Type Art.no. Cap.ton

Max. shaftlength mm

Max. spread mm

Strokemm

WeightKg

HP 43 *HP 63 *HP 83 *HP 123 *HP 203**HP 303 **

791000792000793000794000796000797000

468122030

185215230270360360

275300350375520550

60858585111111

111111142020

4.56.56.58.022.032.0

* Incl. safety net ** incl. safety blanket

BETEX HP 2/3 Hydraulic pullers

Amm

61010102727

Bmm

222525293338

Cmm

325151516060

Dmm

84122122118161155

Emm

424550608068

Fmm

222525284050

Gmm

Compact, ergonomic design, easily operatedby one person!

For accessory sets see page 14, 15.

Page 15: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

HYDRAULIC PULLERSBETEX HSP 2/3-arm pullers, self-centering, with integrated pump and cylinder

11

• Practical!Self-centering, easy to convert, 2-arm or 3-arm puller.The arms slide inwards or outwards simultaneously.

• Compact!The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose or puller.

• Strong! The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.

• Economical! 2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!

• Safe! The integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.

• Versatile! Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.

Advantages of self-centering pullers:• Prevents damage to shaft and workpiece being pulled. • Efficient and saves time. • Can be used in any position.• Adapters included.

4, 6, 8, 12, 20 and 30 ton capacity!

Compact, ergonomic design, easily operatedby one person!

Type Art.no. Cap.ton

Max. shaftlength mm

Max. spread mm

Strokemm

WeightKg

HSP 43* HSP 63* HSP 83* HSP 123*HSP 203**HSP 303**

791500792500793500794500796500797500

468122030

190230280305365465

325380450485570680

60708585111111

131313152020

8.010.012.015.025.036.0

BETEX HSP 2/3 Hydraulic self-centering pullers

Amm

101013

16,52727

Bmm

2222

27,5293338

Cmm

------

Dmm

405070706285

Emm

424550608098

Fmm

222325284050

Gmm

For accessory sets see page 14, 15.

* Incl. safety net ** incl. safety blanket

Page 16: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

HYDRAULIC PULLERSBETEX HXP 2/3-arm pullers, self-centering

12

Safe and easy dismounting of bearings, couplings, rings etc.

For accessory sets see page 14, 15, 29, 33 and 34.

Type

HXP 83*HXP 123*HXP 203**HXP 303**HXP 503**

Art.no.

793600794600796600797600799600

Cap. ton

812203050

Max. shaftlength mm

280305365465455

Max. spread mm

450485570680860

StrokemmH E

Pump tip mm

F G A

Jaw tip mm

B C8585111111330

4250608098

2225284050

4070706285

1313152020

1013

16.52727

2227.5293338

WeightKg

9.011.724.0.34.0140.0

BETEX HXP 2/3 Hydraulic self-centering pullers

Separate 2-stage handpump available.

• Practical!Self-centering, easy to convert, 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.

• Safe!Arms can never deflect!

• Economical! 2/3-arm combination puller, 2 pullers for the price of one.

• Strong!The greater the pulling force, the tighter the jaws grip!The arms cannot bend or deflect.

Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled.• Work efficient and save time. • Accessory sets are available for the 8 and 12 ton pullers. • Supplied in handy carrying case.

8, 12, 20, 30 and 50 ton capacity!

* Incl. safety net ** incl. safety blanket

Page 17: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Type Operations Outputtons

Amm

Bmm

Cmm

Dmm

E Fmm

WeightKg

HPP123Pushing

Outer pullingInner pulling

8128

44-28085-300110-210

270260

130-150

140140

-

2828-

M12-P1.75-

1"-12UNF

30--

19,5

BETEX Push Puller / three-in-one

Push Puller: three-in-one toolThis unique patented design provides end users with athree-in-one tool to easily and safely fit or remove bearingsand sleeves using either their outer or inner edges.The push puller is specially designed for combined pushingand pulling. This creates one tool that uses even force toenable very easy pushing and pulling.The pushing jaw fits on the bearing’s inner ring, preventingthe transmission of forces and/or heat through the outerring to the moving parts, minimizing the risk of bearing damage.

User-Friendly• Unique, patented double-acting pump body to provide

pushing and pulling force.• Unique jaw design for mounting and outer ring pulling

without removing and changing.• Three-jaw structure always provides an even and

constant force, whether mounting, outer ring pullingor inner ring pulling.

• Depends on user requirements - the extension barscan be used where necessary for extra reach.

• Self-centering design of the inner puller always provi-des an even force and prevents jaws sliding off duringoperation.

Safe• The built-in safety valve ensures user safety and

prevents damage to tool and job.• The built-in safety valve prevents the user from being

harmed and the job from being damaged as ratedpressure cannot be reset or adjusted.

• Most parts are forged of SCM440 alloy steel, creatinga very safe and durable product.

Cost-reducing• Built-in safety valve ensures the tool is always operated

as per the rated pressure, significantly extending toollife.

• Three-in-one design reduces preparation, tool-resettime and duration of operation.

• This push puller is ideal for fitting and removing a widevariety of press-fit parts, including bushings, wheels,bearings, gears and pulleys.

Inn

er p

ulli

ng

Ou

ter

pu

llin

gP

ush

ing

HYDRAULIC PULLERSBETEX HPP Push Puller

13

For accessory sets see page 14, 15.

Page 18: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

ACCESSORY SETS

14

Acc. Set HP 43,Acc. Set HP 63, Acc. Set HP 83,Acc. Set HP 123,

791100792100793100794100

46812

250280280325

8.512.512.518.0

Ø 15-110Ø 25-150Ø 40-150Ø 45-225

HSP 43HSP 63,HSP 83,HSP 123,

HXP 83HXP 123, HPP 123

Type Cap. tonArt.no. Min/max Spreadmm

Shaft lengthmm

Weightkg

Bearing splitters

This accessory set consists of:1 puller block 2 connecting rods (legs)1 set of bearing splitters for a min./max Ø 25-225 mm

You can use the cylinder from the HP/HSP/HXP series.

ACCESSORY SETS FOR 4, 6, 8, 12 TON PULLERS HP, HSP, HXP, HPP

Page 19: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Easy to useThe tri-section plates are specially designed to be used inconjunction with the three-armed pullers. The unique andpatented swivel design creates maximum spread and applies even force at the most efficient point. The platesgrip behind the inner and outer rings of the bearing, preventing the pulling force from being transmitted throughthe moving parts, minimizing the risk of bearing damage.

SafeThe Tri-section plate’s unique design ensures the applica-tion of force at the most efficient point – the inner ring andouter ring together – and thereby requires less force for removal than required if only pulling on the outer ring. The firm grip behind a bearing's inner and outer rings ensures that the pulling forces are not transmitted throughthe moving parts, preventing damage to the bearing.Most parts are forged SCM440 alloy steel, creating a verysafe and durable product.

User-friendly• Unique, patented swivel design creates maximum

spread.• The tri-section construction provides even-force

distribution, preventing bearings from locking and/ortilting on the shaft during removal.

• Suitable for use in conjunction with all three-armedhydraulic pullers.

• Available in a wide range, covering the most commonshaft sizes.

Cost-reducing• The patented swivel design creates a bigger spread

than all other splitters, resulting in considerable costsavings.

• The unique design creates the most efficient andconvenient system covering common shaft sizes.

• Eliminates the need for extra accessories, reducingfuture costs.

The Tri-section plates series consist of 3 different sizesof tri-section plates that are suitable for shafts of max. Ø ranging from 50 to 495 mm (2" to 19.5").

TypeA1 mm A2 mm

SpreadB (mm max)

Cmm

Available shaft diam Dmm

E Fmm

Weightkg

Tri-section 210Tri-section 340Tri-section 495

5090140

210340495

280460660

115170240

285430600

-16UNF-14UNF

1”-14UNF

314561

5.516.541

Use in combination withTri-section 210: HP/HSP43, 63Tri-section 340: HP/HSP/HXP 83, 123, HPP 123Tri-section 495: HP/HSP/HXP 203, 303

3/4"7/8"

Swivelear design toget wideopenspread.

ACCESSORY-SETSTri-section plates

15

Page 20: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MOBIPULLER

16

25OR50TONS

Mobile hydraulic puller

Page 21: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

17

Meaning of codes:

25-50 tractive force in tons

430 max. diameter in mm

H manual hydraulic

E electrical hydraulic

V mobile

A remote control

S max. stroke in mm

D double acting

THE BETEX MOBIPULLERis a heavy duty, mobile hydraulic puller. It is used for dismantlingbearings, couplings, gears and other parts, with relative speed and ease. The Mobipuller excels through functional and ergonomicoperation. It is stable, mobile and adjustable in height.A maximum tractive force of either 25 or 50 tons can be appliedwith diameters of up to 430 mm.To ensure safe and easy operationthe electrical models are equipped with remote control, safetycage and pressure gauge.

A1: In standard position mm:A2: In extended position mm:B1: Frame length in standard pos. mm:B2: Frame length in extended pos. mm:

Position high / low mm:Dimensions L x W mm:

C: Diameter of jaws mm:D: Set-up height mm:

Adapters mm (155 mm):Weight kg:

Auxiliary tools for dismantling ofinner rings and delicate components.

Remote control

All models areequipped with asafety cage for personal safety

Type

25 HV 430 S 260

25 EVA 430 S 260

50 HV 430 S 260

50 EVA 430 S 260

50 EVA 430 S 340

50 EVAD 430 S 340

50 EVAD 430 S 460

Art.no.

700001

700002

700003

700004

700005

700006

700007

Cap. Ton

25

25

50

50

50

50

50

Stroke cylinder

260

260

260

260

340

340

460

Pump hydraulic

manual/electric

manual

single acting electric

manual

single acting electric

single acting electric

double acting electric

double acting electric

In standard

position mm

575

575/500

575/500

575/500

575/500

450

300

In extended

position mm

955

955

955/880

955/880

955/880

830

680

575 - 575/500955 - 955/800121015901100/16501470x1040430900/1430Ø 40,50460

Page 22: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

HYDRAULIC PULLERSBETEX 50 HXPM - MOBILE 2/3-arm puller, 50 t self-centering

18

For dismantling of transmission parts, such asbearings, couplings, bushes, gear wheels, etc.

• Practical!The puller is easy to manoeuvre, adjustable in height and5° vertically adjustable.

• Fast! The complete stroke is 330 mm. Three adapters(extensions) are included for a max stroke of 475 mm.

• Safe!The arms move inwards and outwards simultaneously andcannot deflect. A safety release valve prevents overloadand ensures that you never exceed the maximum powercapacity.

50 ton capacity!

Page 23: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

19

BETEX 50 HXPM MOBILE HYDRAULIC 2/3-ARM PULLER, SELF-CENTERING

Type

Capacity in tons

Max. stroke in mm

Max. spread in mm

Min. spread in mm

Max. shaft length in mm

Operating main cylinder

Operating height adjustment

Operating self-centering jaws

Four adapters (in mm)

Min. height (from the centre) in mm

Max. height (from the centre) in mm

Manometer

Weight in kg

50-HXPM-1250-S330

50

330

1,250

75

665-720

Electric-hydraulic pump, 230V - 16A, with remote control

with footpump

with handpump, double-acting

2 x Ø 40, 2 x Ø 50, length: 155

820

1.370

700 bar

372

1 Footpump for height adjustment.2 Double-acting handpump for holding, opening and

closing the jaws for safe, secure grip on job.3 Electric-hydraulic pump, 230V - 700 bar, operates the

cylinder.4 Self-centering; the jaws are evenly advanced or

retracted.5 The design prevents the puller jaws from slipping or

deflecting.6 Puller can easily be converted from 3- to 2-arm

configuration.7 The puller is adjustable 5° vertically. 8 The cart has two swivel casters (self-locking) and

has two rigid casters.9 The hydraulic cylinder is a 2-stage spring-return type

with a max. working pressure of 700 bar (50 ton).10 Four adapters (cylinder extensions) with a total

length of 620 mm are included.

1

4

7

8

9

10

10

3

2

56

Including safety blanket

Page 24: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MOBILIFT WORKBENCH

20

The Betex Mobilift

is a modern design adjustable bench with a unique one-arm lifting principle.

The bench is mobile and stable.The use of a hydraulic pump means no cables on thework floor. All these characteristics make the Mobilift verypopular in workshops, so that it soon becomes indispensable.

The Mobilift workbenches are available in 2 types:capacity 400 or 1000 kg.

Advantages:• Very stable, therefore very suitable as a workbench.• Extra safe due to the lack of a 'scissors' movement.• Wooden worktop prevents work from slipping.• 2 lockable drawers.• Simple controls.• Promotes a good working posture!

Workbench too low, noroom for feet under theworktop.

GOED FOUT

IDEAL IN ANY WORKSHOP

RIGHT WRONG

Type/art. nr. H400/260400 H1000/261000

400 kg

1500x950x620

1220x800

620

1160

Hydraulic footpump

check valve

2 casters with brake,2 rigid casters, Ø 160,

wheel width 50

6301080

500x300x100

Carrying capacity

Dimensions in lowestposition (lxwxh)

Worktop dimensions(lxw)

Working height: minimum

maximum

Height adjustment

Security devices

Base/frame

Wheel basis width: length

Tool drawers (lxwxh)(2 pcs with padlock)

(dimensions in mm)

1000 kg

1450x860x620

1220x800

670

1160

Hydraulic footpump

check valve

2 casters with brake,2 rigid casters, Ø 160,

wheel width 50

6301080

500x300x100

A correct working height androom for the feet allows for agood working posture, withback straight, the worktopclose to the body.

H 400

H 1000

Page 25: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Type Amm

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

Jmm

WSP 10 tonWSP 25 ton

16501650

19001900

740790

610700

225-1065232-1072

120120

540540

54-49050-490

100125

Type Cap. ton

Strokemm

Typepump

Work forcebar

Typecilinder

Weightkg

WSP 10WSPA 10WSPE 10WSP 25WSPA 25WSPE 25

101010252525

250250250250250250

handair

electrichandair

electric

700700700700700700

single actingsingle actingsingle actingsingle actingsingle actingsingle acting

878890145146148

C

BA

D

E

F

G

H J

BETEX WSP 10 tonIdeal for mounting and dismantling jobs,like repairing motors, transmissions, removal and installation of gears, bearings and other parts.

BETEX WSP 25 tonIdeal for heavy duty pressing jobs, in garages, industrial work shops, formounting and dismantling of couplings,bearings and other parts.

WSP shop presses are including adaptors andaccessories to support work: V adaptor, V blockand 2 pushing adaptors.

• Robust steel frame ensures maximum stability andprevents bending.

• Multiple working positions for press bed.• Steel crossbars prevent the frame from bending

when loaded.

• Includes gauge for precise control of the press force.• Available in 2 models: 10 en 25 ton.• Single-acting and spring-return ram with 10” stroke

is horizontally moveable on head channel.• Also available with electric- or air-hydraulic pump.

WORKSHOP PRESSESProfessional workshop presses with hand, air or electric pump

21

cap. up to and including 200 ton available.

Page 26: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

CYLINDERS

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

Emm

Fmm

Hmm

Jmm

Kmm

Oø un

Pmm

Umm

Wun

Xmm

ZmmHeight mm

SSS51SSS53SSS55SSS57SSS59SSS101SSS102SSS104SSS106SSS108SSS1010SSS1012SSS1014SSS151SSS152SSS154SSS156SSS158SSS1510SSS1512SSS1514SSS251SSS252SSS254SSS256SSS258SSS2510SSS2512SSS2514SSS308SSS502SSS504SSS506SSS5013SSS756SSS7513SSS1006SSS10010

5

10

15

25

30

50

75

100

277612718123225.45510515520625730535625.451

101.6152.420325430535625.550.8102

152.421026131136220951102159337156333168260

1954901281644087167246327408484566501001992993984985986988416833850569686510311200923361723112623871619345722283449

11016521627332489121171247298350400451124

149.5200

271.5322373424475

139.5165

215.5273324375425476

388.5176227288463288492357449

137241343454556

114.4176276402504607705807149

200.5301.6423.9525627729831165

215.8317.5425.4534636736838

597.5227328447800444825525709

38

57

70

85

103

127

146

177

30

45

50

65

75

95

115

130

25.4

38

40

55

65

80

95

105

19

19

191919

25.425.425.425.425.4

25

573333333530

41

25

-40404040404040

38

50

50

70

70

70

6

-6666666

9.6

10.5

10.5

2

5

2

-16

#10-24un

1"-81"-81"-81"-81"-81"-81"-8

1"-8

1 -16

1 -16

-

-

-

3/4" 1/4"

3/8"

1/2"

1/4"

3/4"

5/16"

3/4"

1/2"

1/2"

7/8"3/4"

1/2"

1/2"

5/16"

1414141616616161616161616

25

25

25

-

-

-

25

39

47

58

-

95

--

139

-20un

-18un

-16un

-12un

-

-12un

-

-10un

1 -16

2 -14

2 -16

3 -12

4"-12

5"-12

5 -12

6 -12

28

30

30

50

50

55

45

45

14

12

12

19

-

19

-

25

11.51.92.42.81.82.33.34.45.46.46.88.23.34.15.06.88.29.510.911.85.96.48.210

12.214.116.317.718.115

19.123.137.629.55959

72.6

22

SSS SERIES: Single acting, spring return

Model: SSS-SeriesCapacity : 5-100 tonStroke : 25,4-362 mmMax. working pressure :10,000 psi / 700 Bar

All rams are single acting with spring return. Pistons hard chromed. Rams inside roll-polished, outside blasted and chromed.

Power sources:Handpumps, Footpumps and air/ hydraulic pumps and electric pumps.Pump and cylinder sets:All cylinders are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience.

Page 27: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: SCS-SeriesCapacity : 10-100 TonStroke : 38-62 mmMax. working pressure :10,000 psi / 700 Bar

All rams are single acting with spring return.Pistons hard chromed.Rams inside roll-polished.Rams outside blasted and chromed.

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

mm

mm

mm

Hmm

Kmm

Lmm

Mmm

mm

mm

Umm

mmHeight mm

SCS101SCS201SCS302SCS502SCS1002

10203050100

3845626057

53.0127.0274.0381.0756.0

8898117122141

126143179182198

7093107125165

Cmm

-----

42607590130

3850657095

-----

1717192331

53321

-----

-----

M4M5M5M5M8

888810

2639393955

-----

4.15.06.810.922.7

SCS SERIES: Shorty, Flat, Compact

CYLINDERSSCS SERIES: Shorty, Flat, Compact

23

Page 28: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: SLS-SeriesCapacity : 5-150 TonStroke : 6-17 mmMax. working pressure : 10,000 psi / 700 Bar

All rams are single acting with spring return.Pistons hard chromed.Rams inside roll-polished.Rams outside blasted and chromed.

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

mm

mm

mm

Hmm

Kmm

Lmm

Mmm

mm

mm

Umm

mmHeight mm

SLS50SLS100SLS200SLS300SLS500SLS750SLS1000SLS1500

51020305075100150

612121316161617

4.518.034.054.0102.0166.0212.0342.0

33425158667985100

395463718295101117

58x4182x55101x76117x95140x114165x140

178x152.5216x190

Cmm

28.536

49.352.366.576.276.2117

3144607390115130160

25.438

50.863.570

82.592115

9.511151619

20.520.520.5

1619191919191923

11122222

2028.5394755697695

2234394455667482

--------

--------

--------

5.57.5101011

13.513.513.5

1.01.43.14.56.811.314.526.3

SLS SERIES: Shorty, Flat, Compact

CYLINDERSSLS SERIES: Shorty, Flat, Compact

24

Page 29: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: SHS-SeriesCapacity : 12-100 TonStroke : 8-158 mmMax. working pressure : 10,000 psi / 700 Bar

All rams are single acting with spring return.Pistons hard chromed.Rams inside roll-polished.Rams outside blasted and chromed.

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

mm

mm

Hmm

Jmm

Kmm

un

Pmm

Umm

unc

un

Xmm

mm

ZmmHeight mm

SHS120SHS121SHS123SHS202SHS206SHS302SHS306SHS603SHS606SHS1003

121212202030306060100

842765215268.51587615383

1896175230671435100593218761774

60121180162310182332

247.5326.5254

68163256214462

250.5490

323.5479.5337

54.154.154.175759090125125165

mm353535

54.954.965659090125

737373100100114114

158.6158.6213

11.5191919192325323238

---

545463638989125

---991010

12.512.512

-16--

1 -161 -161 -161 -162 -162 -164"-12

16161619192222222228

50.8-

50.882.682.69292130130178

-18--18-16 -16-16-16-12-12-11

2 -162 -162 -16 3 -123 -124 -124 -126 -126 -128 -12

30303038384242505060

19.519.519.527273636545479

9-

12.79.49.41414141419

1.53

4.27.513.511

20.426.434

50.1

SHS SERIES: center hole cylinders Centre Hole ø

3/4"

9/16"9/16"7/8"7/8"3/4"3/4"

5/16"

5/16"3/8"3/8"3/8"3/8"1/2"1/2"5/8"

3/4"3/4"3/4"7/8"7/8"1/2"1/2"1/4"1/4"3/8"

CYLINDERSCenter hole cylinders

25

Page 30: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: CJ seriesSpring-loadedAvailable in :10 or 20 ton.Stroke : 41 mm.Max. working pressure : 10,000 psi / 700 bar.

Hard chromed piston.Ram inside roll-polishedPerfect for jobs with limited space, like positioningmachines, mounting tools or load tests.

Type Capacityton

Push Pull

Strokemm

Oil capcm3

Push Pull

A

Retracted

B

Extended

WeightKg

mm

mm

Hmm

Imm

mm

Kmm

un

Pmm

Umm

Vmm

Zmm

un

XmmHeight mm

DAC1010DAC1012DAC2512DAC308DAC3014DAC506DAC5013DAC756DAC7513DAC1006DAC10013

101025303050507575100100

4.54.5131515151525254545

255305305204356153356153356153356

40548515009011572108423391589342720304380

16019072044076032068050510909452040

408458470

386.5551.5336511353524359526

663763775

590.5907.5489841506854512856

45455675759595115115130130

mm3535505555808095959595

7878101103103127127146146177177

3636363636303030303838

5757268080767675757171

5050505050707070707070

6610101033331010

1"-81"-8

1 -161 -161 -161"-121"-121"-121"-12

1 -121 -12

2020253030

25.425.438383535

---------

139139

----------10-10

---------

25.425.4

2 -14 2 -14 4"-124"-12 4"-12 5"-12 5"-12

5 -12 5 -126 -12 6 -12

2727405050505050505050

1315292029294340585983

DAC SERIES: Double acting cylinders

CJ SERIES: Low-height jacks

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

mm

Dmm

mm

mm

Hmm

Kmm

Lmm

Mmm

Nmm

mmHeight mm

CJ100CJ200

1020

4141

155250

9595

136136

4040

152.5152.5

4565

37.9550.8

407.5407.5

4.94.9

85110

9090

90110

53.869.5

5.58

1/2"

1/2"

1/2"

3/4"3/4"

3/4"3/4"

1/4"1/4"

3/4"3/4"7/8"7/8"

CYLINDERSDAC SERIES: Double acting CJ SERIES: Low-height jacks

26

Model: DAC seriesCapacity : 10-100 tons.Stroke : 153 - 356 mm.Max. working pressure : 10,000 psi / 700 bar.

Perfect for construction, shipyards, utilities, mining andequipment maintenance.Hard chromed piston.Ram inside roll-polished.Ram outside blasted and chromed.

Page 31: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: SSA series• 14 standard models available for 50 to 150 tons.• Up to 60% lighter than steel cylinders.• Heavy-duty spring for easy and full retraction.• Large saddle surface for angle load protection.• High-flow quality couplers.• All models are provided with carrying handles.• Rod wiper protects inner rod from dirt.• Hard-anodized housing and piston reduce wear and

corrosion.

Custom stroke lengths and capacities are available.

Type Capacityton

Strokemm

Oil capcc

AMin.mm

BExt.mm

EffectAreasq.in

WeightKg

CBody

i.d. mm

DBody

o.d. mm

EPiston

o.d. mm

Fmm

GBase toport mm

Kmm

Umm

Vmm

Zmm

SSA502SSA504SSA506SSA508SSA5010SSA754SSA756SSA1002SSA1004SSA1006SSA10010SSA1502SSA1506SSA15010

50505050507575100100100100150150150

501001502002501001505010015025050150250

3547081062141617701381557663132619893315106832055342

165215265315365215265165215265365165265365

215315415515615315415215315415615215415615

9595959595115115130130130130165165165

11111111111515

20.720.720.720.730.730.730.7

140140140140140165165203203203203254254254

8080808080100100110110110110140140140

6060606060707090909090110110110

38.138.138.138.138.138.138.138.138.138.138.138.138.138.1

33333333333333

110110110110110135135160160160160200200200

M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0

66666666666666

67.78.212.716.413.215.918.220.522.730.926.43950

SSA SERIES: Aluminium cylinders

ALUMINIUM CYLINDERSSSA SERIES

27

Page 32: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: PB series• Betex heavy duty handpumps feature a forged

construction.• The drop-forged base and rugged welded construction

effectively prevents collision damage and deformation.• The professional choice for a wide range of industrial

applications.• Internal overload valve prevents pump from being used

beyond its rated capacity.• Two-speed pumps provide rapid pumping to load the

cylinder quickly.• External adjustable relief valve with locking mechanism.• Carrying handles for easy portability.

HEAVY-DUTY HANDPUMPS

28

Type

1st stage 2nd stage

Amm

Bmm

Cmm

Dmm

Emm

Oil portthread

F

WeightKg

Pressure ratingbar

Oil volumeper stroke cc

Usable oil capacity

ccPB350 PB700

13,813,8

700700

350700

13,013,0

2,82,8

335632

303541

9090

146146

128128

3/8 NPT3/8 NPT

5,57,3

2nd stage1st stage

Two-speed heavy-duty handpumps

Page 33: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

Model: AHP series• Our handpumps are always characterized by their

rugged construction and easy-operation handles.• Aluminium alloy construction and handy release

knobs with locking mechanism are perfect forindustrial applications and daily operations.

• Special lightweight design with aluminium alloyconstruction makes for an easily portable andmobile unit.

• Double-acting design on AHP703D is ideal fordouble-acting cylinders without the need for extracontrolling valve and adapters.

• 40,000 psi model provides special, lightweightultra high-pressure application.

Type Usable oilcapacity

(cc)

Oil volume perstroke (cc)

1st stage 2nd stage

WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

I

AHP701AHP702AHP703AHP703DAHP704AHP705UHP2800

350100020002000100027001000

12.912.912.912.912.96.512.9

12.32.32.31.65

10.65

361513556556501629488

Amm

11011015015011015080

391542623623539699620

777710210277102140

140130135135145152108

127127135135127157157

42.542.550

24/3742.55026

37------

-NPT-NPT-NPT-NPT-16UNF-NPT

-16UNF

2.33.56

7.03.56.75.3

Aluminium handpumps

Pressure rating(bar)

1st stage 2nd stage13.813.813.813.813.813.814

700700700700100015002800

3/8"3/8"3/8"3/8"

3/8"

3/4"

3/4"

29

ALUMINIUM HANDPUMPS

Page 34: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

HYDRAULIC SPREADERS/LIFTERS

30

Type

15 TLS25 TLS

Capacityton

Art. no.

1525

789150789250

Max. spreadmm

1016

Max. pressurebar

700700

Combinedpump

single-actingsingle-acting

Amm

58

Bmm

4043

Lmm

235342

WeightKg

48

Various combination sets* available incarrying case, including:• hydraulic spreader/lifter• 2-stage handpump• hose, 1.8 mtr• pressure gauge• T-adapter• male (hose) half coupler• complete quick coupler

* see price list

Loads are lifted perpendicularly!• Ideal for numerous industrial maintenance repair jobs.• Accurate height adjustments (for instance shaft alignment)

can easily be executed by one person.• Easy, light and very practical to use. Particularly

suitable when available space is very limited.• Suitable for spaces of 5 to 43 mm.• Due to the reduced thickness of the jaws,

made of high quality hardened steel, these multi-functional wedges can be used for jobs where working space is extremely limited.

15 TLS

25 TLS

B A

L

Page 35: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

PORTABLE POWER KITS

31

Type PPK 4 Description 4 t Type PPK 10 Description 10 t

PA351HS236PA404SR05AB0523B0524B0525B0526B0467F0180F0181F0182F0183F0184B0540F0179G0026

"heavy duty" hydraulic hand pumpHD hose 1,8 meter4-tons cylinder with 101,6 mm strokespreader 0,5 tonextension rod 406,4 mmextension rod 304,8 mmextension rod 203,2 mmextension rod 101,6 mmmale connectorflat base90 degree V basespreaderplunjer toeram toerubber flexible headserrated saddletransport case

PA603HS236PA106ASR05AB0519B0520B0521B0522B0406F0174F0175F0176F0177F0178B0541F0173G0021

"heavy duty" hydraulic hand pumpHD hose 1,8 meter10-tons cylinder with 152,4 mm strokespreader 0,5 tonextension rod 482,6 mmextension rod 355,6 mmextension rod 254 mmextension rod 127 mmmale connectorflat base90 degree V basespreader plunjer toeram toerubber flexible headserrated saddletransport case on wheels

Set PPK 4 (art.nr. 7560804)incl. 4 t cylinder, 100 mm stroke, in portable transport case

Set PPK 10 (art.nr. 7560810)incl. 10 t cylinder, 150 mm stroke, in portable transport case on wheels.

• ‘Snap-on’ design for quick and easy assembly anddisassembly.

• Extra thick extension rods designed for strengthprevent bending.

• Single acting pump, 700 bar with safety valve toprevent overloading.

• Flexible hydraulic hose, 1.8 mtr.• Versatile through many different accessories! • All parts are made of forged steel.

Page 36: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

• Heat-treated and chrome-plated hydraulic rodprovides longer seal life and optimumperformance.

• Internal safety valve prevents toe jack beingused beyond its rated capacity.

• Leakages are prevented by welding thehousing onto the forged base.

• Strong toe lift for long service life.• Low toe heights for tight spaces.• Swivel sockets for easy operation.• Toe jacks can be operated quickly by hand

without a load.• Removable handle makes unit easier to

operate.

Type Top cap.U (tons)

Top-lift cap.F (tons)

Strokemm

Min. heightA mm

Max. heightA mm

Piston roddiam. J mm

Basedimensions

LxW mm

HeightH mm

Top-liftL1xW1

mm

Weightkg

TOE-025TOE-040TOE-060TOE-100TOE-160TOE-200TOE-300TOE-500

2.5461016203050

1.22358101525

100110100130134140100110

176136134164168182147165

276246234294302322247275

1925364052567090

140x190150x200160x217189x242211x256228x274259x305299x347

1919192225253238

65x5065x5065x5075x5590x55100x60110x60150x60

6.5810

11.92331

47.377.5

Toe jacks

TOE JACKS

32

Page 37: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

• Heavy-duty hoses rated at 10,000 psi meet IJ-100specifications

• Hoses are black rubber coated with two layers of steelbraided reinforcement, I/D of 1/4''.

• Flexible hoses with spring guards at both ends toprotect the adapters. Available to special lengths uponrequest.

• BETEX supplies a variety of screw-set quick couplersin four different sizes. These can also be used withexisting hydraulic systems.

• All couplers are rated to 10,000 psi and have ananti-leak mechanism that works in either low- and/orhigh-pressure conditions.

MODEL: M0031BHydraulic gaugeLiquid-filled, dampens needle vibration.Indicated range: 1000 Bar (14,000 psi); Safety Range:700 Bar(10,000psi).Diameter of Gauge surface: 63 mm; Thread size: 1/4 NPT.

MODEL: E0567Gauge adapterAllows you to fit gauge between hydraulic pump and hosecoupling.

MODEL: VB201/VB401Manifold valveAllows distribution of hydraulic fluid from one source totwo or four cylinders.

MODEL: VC331One-way relief valve Allows metered lowering of cylinder and locks whenprolonged load lifting is required. Also protects rams andhoses which need to be separated.

MODEL: BP422Manifold valveAllows distribution of hydraulic fluid for double-actingcylinder.Aluminium alloy construction for long service life, easyoperation and portability

M0031B E0567 VB201 VB401 VC331

BP422

Type End one End two Length (mm)

HS225HS235HS226HS236HS333HS335HS336

180018002100210090018002100

NPTNPTNPTNPTNPTNPTNPT

1/4"

1/4"

3/8"3/8"3/8"

3/8"

NPTNPTNPTNPTNPTNPTNPT

1/4"

1/4"

1/4"

1/4"3/8"3/8"3/8"

3/8"

33

ACCESSORIESHoses, regulators, valves, gauge adapters

Page 38: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®

MODEL: ADO203 (REDUCING CONNECTOR)Part no. ADO203:1/4 NPT on one male end & 3/8 NPT on theother male end.

MODEL: ADF203 (ADAPTER)Part no. ADF203:1/4 NPT on the male end & 3/8 NPT on thefemale end.

MODEL: ADO303 (HEXAGON NIPPLE)Part no. ADO303:3/8 NPT on both male ends.

MODEL: ADO202 (HEXAGON NIPPLE)Part no. ADO202:1/4 NPT on both male ends.

MODEL: ADF302 (ADAPTER)Part no. ADF302:3/8 NPT on the male end & 1/4 NPT on thefemale end.

MODEL: ADI202 (CONNECTOR)Part no. ADI2021/4 NPT on both female ends.

MODEL: ADI203 (CONNECTOR)Part no. ADI203:1/4 NPT on one female end & 3/8 NPT onthe other female end

MODEL: ADI303 (CONNECTOR)Part no. ADI303:3/8 NPT on both female ends.

COUPLERS

CP230

CP350

CP210

CP330

Type Type Thread size

CP210

CP230

CP330

CP350

Ram halfHose halfRam halfHose halfRam halfHose halfRam halfHose half

CP211CP212CP231CP232CP331CP332CP351CP352

NPTNPTNPTNPTNPTNPTNPTNPT

1/4"

1/4"

1/4"

1/4"3/8"3/8"3/8"3/8"

ACCESSORIESConnectors, nipples, adapters

34

Page 39: CBC 1 HYDRAULIC CATALOGUE GB.pdf
Page 40: CBC 1 HYDRAULIC CATALOGUE GB.pdf

BETEX®