For more information: see www.cdielectronics.com or Call CDI Tech Support 1-866-423-4832

SPARKPLUGS

MOTORACCESSORIES&

980For more information see: www.ngksparkplugs.com

SPARK PLUGS

ORDER NO. Mfr. No. PLUG NO. Std. Pack

076-29100 2910 AB6 10076-30100 3010 AB7 10076-79090 7909 AB8 10076-29000 3323 AR6FS 10

076-31100 3110 B2 10076-12780 3210 B4 10076-86016 3112 B4L 10076-20000 3410 B4LM 10076-22000 7534 B6HS 4076-32120 3212 B6L 10076-05000 3510 B6S 10076-14000 5110 B7HS 10076-86001 2129 B7HS-10 10076-03000 3710 B7S 10076-57000 2411 B8ES 10076-13000 5510 B8HS 10076-04000 3810 B8S 10076-63000 2611 B9ES 10076-08000 3626 B9HS-10 10076-79380 7938 BKR5E 4076-35450 6953 BKR5E-11 4076-69620 6962 BKR6E 4076-69930 6993 BKR6EKU 10076-55530 5553 BKR6ES-11 4076-58810 5881 BKR7EKU 10076-23870 4952 BKR7ES-11 4076-19000 5628 BM4A 10076-16000 5921 BM6A 10076-68850 6221 BM6F 10076-55000 5728 BMR4A 10076-18000 7421 BMR6A 10076-66110 7832 BP5ES 4076-79110 7333 BP6ES 4076-71000 4838 BP8H-N-10 10076-54000 3823 BP8HS-10 10076-86021 6729 BP8HS-15 10076-71600 7021 BPM6A 10076-15000 7321 BPM7A 10076-65970 6597 BPR5EIX 4076-91000 7734 BPR5ES 4076-51330 6222 BPR5HS 10076-89000 3623 BPR6EFS 10076-66370 6637 BPR6EIX 4076-36000 7131 BPR6ES 4076-96000 2623 BPR6FS 10076-40850 4085 BPR6HIX 4076-75000 7022 BPR6HS 10076-79000 2633 BPR6HS-10 10076-40550 4055 BPR7EIX 4076-40440 5534 BPR7ES 4076-59440 5944 BPR7HIX 4076-86022 6422 BPR7HS 10076-43000 1092 BPR7HS-10 10076-86002 3923 BPR8ES 10076-72000 3725 BPR8HS 10

ORDER NO. Mfr. No. PLUG NO. Std. Pack

076-90000 7788 BPR9ES 10076-42000 4495 BPZ8H-N-10 10076-64000 3133 BPZ8HS-10 10076-65000 3180 BPZ8HS-15 10076-83000 5880 BR10ECS 10076-68010 6801 BR10EIX 4076-94002 6957 BR10EIX-SOLID 4076-73000 4684 BR10ES-SOLID 10076-86000 7613 BR10EYA 10076-86012 5798 BR2LM 10076-50900 3322 BRHS 10076-86011 4133 BR4LM 10076-22460 5866 BR5ES 4076-34000 3722 BR5HS 10076-35000 4922 BR6ES 4076-23000 4323 BR6FS 10076-23180 2318 BR6FIX 4076-34190 3419 BR6HIX 4076-33000 3922 BR6HS 10076-86007 1090 BR6HS-10 10076-17000 3522 BR6S 10076-66640 6664 BR7EIX 4076-61000 5122 BR7ES 10076-66150 6615 BR7ES-SOLID 10076-70670 7067 BR7HIX 4076-38000 4122 BR7HS 10076-26000 1098 BR7HS-10 10076-94003 6747 BR8EIX-SOLID 4076-58000 5422 BR8ES 10076-67000 3961 BR8ES-SOLID 10076-79860 7986 BR8ES-11 10076-82000 2663 BR8EYA 10076-86009 1157 BR8HCS-10 10076-70010 7001 BR8HIX 4076-32000 4322 BR8HS 10076-25000 1134 BR8HS-10 10076-95000 6669 BR9ECS-5 10076-94001 3089 BR9EIX-SOLID 4076-56000 5722 BR9ES 10076-68000 3194 BR9ES-SOLID 10076-74000 7548 BR9EYA 10076-41000 4522 BR9HS 10076-09000 4551 BR9HS-10 10076-39000 6431 BU8H 10076-86013 2322 BUE 10076-06000 2622 BUHW 10076-11000 5626 BUHW-2 10076-37000 2522 BUHX 10076-10000 5526 BUHXW-1 10076-52000 7447 BUZ8H 10076-07000 2147 BUZHW 10076-12000 2173 BUZHW-2 10076-44000 3579 BZ7HS-10 10

NGK SERVICE BULLETINSubject: Introduction of "SOLID" Terminal Post for the Aftermarket Snowmobile & Watercraft.NGK Spark Plugs has made available two of our most popular spark plugs for snowmobile & watercraft, those being BR8ESand BR9ES with a solid terminal nut.

(Please note that motorcycles still require BR8ES and BR9ES with the current style, having a screwable terminal nut.)NOTE: NGK listing with the description "SOLID" means a solid terminal nut plug.

NOTE: Spark Plugs below are sold individually

981For more information see: www.ngksparkplugs.com

SPARK PLUGS

ORDER NO. Mfr. No. PLUG NO. Std. Pack

998-28000 5812 CM6 10076-46950 4695 CR4HSB 10076-97001 6689 CR5EH9 10076-65350 6535 CR5HSB 10076-88000 2983 CR6HSA 10076-69550 6955 CR9EB 10076-53000 7502 CR9EH-9 10076-45480 4548 CR9EK 10

076-65120 6512 D6HA 10076-78000 3481 DCPR6E 10076-86008 3932 DCPR7E 10076-43390 4339 DCPR8E 10076-28870 2887 DPR5EA-9 10076-77000 5531 DPR6EA-9 10076-31080 3108 DPR6EB-9 10076-86006 4929 DPR8EA-9 10076-51000 4623 DR5HS 10076-76000 4823 DR6HS 10076-86018 7839 DR7EA 10076-86019 3123 DR7ES 10076-86005 2923 DR8ES-L 10

076-45890 4589 IFR6T11 4076-55880 5588 ILFR6G 4076-65440 6544 IMR9D-9H 4076-55990 5599 ITR4A15 4076-58870 5887 IZFR5G 4076-58990 5899 IZFR5J 4076-40950 4095 IZFR6F-11 4076-44620 4462 IZFR6J 4076-47570 4757 IZFR6N-E 4

076-64990 6499 LFR4A-E 10076-97000 6376 LFR5A-11 10076-36720 3672 LFR6A-11 10

076-94000 3741 PZFR5F 4076-43630 4363 PZFR5F-11 4076-76960 7696 PZFR6H 4076-42530 4253 PZFR7G-G 4076-78620 7862 PZTR5A-15 4

076-70000 2238 TR5 4076-93000 3951 TR55 4076-34030 3403 TR55GP 4076-71640 7164 TR55IX 4076-73970 7397 TR5IX 4

076-50000 2771 UR5 4076-80000 6630 UR4 4076-74010 7401 UR4IX 4076-71770 7177 UR5IX 4076-92000 7773 UR6 4076-79660 7966 UR6GP 4076-73480 7348 UR6IX 4

076-10710 2438 WR5 4076-75100 7510 WR5IX 4

ORDER NO. Mfr. No. PLUG NO. Std. Pack

076-26370 5858 XR4 4076-40000 3332 XR5 4

076-69000 5334 YR5 4076-75160 7516 YR51X 4076-29530 2953 YR5GP 4

076-40430 4043 ZFR4F-11 4076-86020 6855 ZFR7F-11 4

SPARK PLUGS - DESIGN SYMBOLS

NOTE: Spark Plugs below are sold individually

PLUG NO. Replaced ByCJ11 . . . . . . . . . . .RCJ8F10C . . . . . . . . . . .RF10CF11YC . . . . . . . . . .RF11YCH8 . . . . . . . . . . . . .RH8CJ11 . . . . . . . . . . . .J11CJ12YC . . . . . . . . . .RJ12YCKCJ6 . . . . . . . . . . .CJ6KCJ7Y . . . . . . . . . .RCJ7YKJ12 . . . . . . . . . . .RJ12CL90 . . . . . . . . . . . .L90CN11YC . . . . . . . . .RN11YCN74C . . . . . . . . . .RN5C (+)

PLUG NO. Replaced ByQUL77V . . . . . . . .QL76VRCJ6 . . . . . . . . . . .KCJ6RDJ7J . . . . . . . . . .RDJ7YRH8 . . . . . . . . . . .RH8CRH10 . . . . . . . . . .RH10CRJ12 . . . . . . . . . . .RJ12CRJ4J . . . . . . . . . . .J4CRN74C . . . . . . . . .RN5CRV15YC . . . . . . . .RV15YC4UJ2J . . . . . . . . . . .J4CUJ4J . . . . . . . . . . .J4CUL18V . . . . . . . . .UL77V

For more information see: www.championsparkplugs.com982

NOTE: Spark Plugs below are sold individually

(+) Marine Only

ORDER NO. Mfr. No. PLUG NO. Std. Pack

076-00001 849 CJ6 4076-00002 843 CJ8 8076-00004 846 CJ14 8076-00005 853 CJ7Y 4

076-00006 851 DJ6J 8076-00007 850 DJ7J 8076-00079 855 DJ7Y 8076-00008 847 DJ8J 8076-00089 509 D9 6076-00009 516 D16 6

076-00096 587 H8C 8076-00013 844 H10C 8

076-00014 825 J4C 8076-00015 823 J6C 4076-00016 841 J8C 8076-00103 511 J11C 8076-00019 845 J17LM 4076-00101 861 J19LM 4

076-00078 885M L6VC 4076-00024 827M L76V 4076-00025 821M L77JC4 4076-00026 807M L78C 4076-00027 833M L78V 4076-00028 811M L82C 4076-00070 328 L82YC 4076-00029 306 L86C 8076-00030 312 L87YC 4076-00093 896 L90C 8

076-00032 805 N2C 4076-00033 801 N3C 4

076-00037 888 P8Y 8

076-00111 7919 QC10PEPB 6076-00112 956M QC12PEP 6076-00071 876M QL16V 4076-00039 898M QL76V 4076-00040 828M QL77JC4 4076-00109 883M QL78C 4076-00041 838M QL78V 4076-00107 938M QL78YC 4076-00106 931M QL82C 4076-00043 932M QL82YC 4

ORDER NO. Mfr. No. PLUG NO. Std. Pack

076-00114 810 RA8HC 4076-00046 859 RCJ7Y 8076-00047 840 RCJ8 4

076-00048 870 RDJ6J 8076-00090 872 RDJ7Y 8076-00050 865 RDJ8J 8

076-00095 129 RF10C 4076-00091 22 RF11YC 8

076-00099 538 RH8C 8076-00100 854 RH10C 8076-00053 857 RH18Y 8

076-00055 102 RJ6C 4076-00056 871 RJ8C 4076-00092 592M RJ12C 4076-00058 856 RJ17LM 4076-00102 868 RJ19LM 4076-00080 14 RJ12YC 4076-00059 58 RJ18YC 8

076-00060 874M RL82C 4076-00061 830 RL86C 8076-00062 327 RL87YC 4

076-00063 818 RN2C 4076-00064 880 RN3C 8076-00085 904 RN4YC 8076-00098 123 RN5C 6076-00065 415 RN9YC 4076-00066 404 RN12YC 4076-00110 959M RP10HC 4

076-00081 401 RS12YC 6

076-00067 121 RV8C 4076-00068 400 RV9YC 4076-00069 113 RV12C 4076-00072 406 RV12YC 4076-00094 18 RV15YC4 4076-00104 25 RV17YC 4076-00108 942M RV91MC 4076-00105 930 RV92YC 8

076-00075 831M UL77V 4076-00113 955M XC12PEPB 4

SPARK PLUGS

For more information see: www.championsparkplugs.com983

GRAVITY FEED DISPLAYThis display will hold up to 240 individually boxed spark plugs whichallows for a variety of product mixes. As well, it has a pianohinged door that covers a storage shelf and the cover has the optionof mounting an application guide.The display comes with pre-punched holes for easy wall mounting ina shop or behind the service counter.ORDER NO. 076-68964Mfr. No. 68964

More Power – Less FoulingFor All Your Power Toys!Champion PowerSport Spark Plugs Deliver Unmatched Performance.

• More power…for quicker acceleration.• Less fouling…for faster throttle response-no more fouling.• Sure Starts…delivers maximum ignition voltage.• Eliminates RFI related static…in audio, on-board communicationsand engine management systems

• Extensive Coverage…seven SKU’s cover over 90% of the personalwatercraft and snowmobile market.Note: PowerSport Plugs Below are Single Carded

ORDER NO. Mfr. No. PLUG NO.

076-08430 843S CJ8-SSP076-08460 846S CJ14-SSP076-08530 853S CJ7Y-SSP076-08250 825S J4C-SSP076-08230 823S J6C-SSP076-08410 841S J8C-SSP076-08450 845S J17LM-SSP076-08610 861S J19LM-SSP076-08270 827S L76V-SSP076-08210 821S L77JC4-SSP076-08330 833S L78V-SSP076-08110 811S L82C-SSP076-08280 828S QL77JC4-SSP076-09380 938S QL78YC-SSP076-09310 931S QL82C-SSP076-09320 932S QL82YC-SSP076-05920 592S RJ12C-SSP076-08680 868S RJ19LM-SSP076-08310 831S UL77V-SSP

SHOP PACKS• Packed for convenience& protection

• Easier to handle• Instant Inventory• Cost savings

NOTE: Shop Pack contains24/Spark Plugs in Box.

ORDER NO. Mfr. No. Standard Design Plug*076-80181 8018-1 RV15YC4076-80711 8071-1 RC12YC076-83041 8304-1 RS9YC076-83321 8332-1 RN7YC / N7YC076-83391 8339-1 RN6YC / N6YC076-84011 8401-1 RS12YC, RS12PYP076-84051 8405-1 RN12YC / N12YC, RN13LYC, RN14YC076-84151 8415-1 RN9YC / N9YC, RN11YC4 / N11YC076-86541 8654-1 G57C, G59C076-86981 8698-1 G59C076-88091 8809-1 RA4HC, RA6HC / A6HC076-88101 8810-1 RA8HC076-88121 8812-1 RA8HC, RA8GHC076-88141 8814-1 RL82YC / L82YC, QL82YC076-88151 8815-1 RA8HC076-88191 8819-1 RA8HC076-88831 8883-1 QL77JC4 / L77JC4, QL78C / L78C,076-89021 8902-1 RN2C / N2C, RN3C / N3C, RN4YC,

C57, C57YC, C59, C61076-89041 8904-1 RN2C / N2C, RN3C / N3C, RN4C / N4C,

RN4YC

*NOTE: The improved operating characteristics of PowerSportplugs vary from standard designs. It is important to refer to theChampion application catalog for maximum performance andcorrect application.

SPARK PLUGS

984

IGNITION WIRE TERMINALReplaces: Mercury 20121, OMC 510364(10/Pk)ORDER NO. 018-52249

7MM HYPALON IGNITION WIREMetallic Core100' SpoolORDER NO. 018-52260

For more information see: www.teleflexmarine.com

LB type: 14mm threadLZ type: 10,12 & 14 mm thread

Phenolic resin

• 90° Elbow Type• 14 mm thread• Resistance: 5 k ohmsORDER NO. 076-01001Mfr. No. 8020

14 mm threadPhenolic resin

• 90° Elbow Type• 14 mm thread• Resistance: 5 k ohmsORDER NO. 076-01002Mfr. No. 8744

SPARK PLUG WIRE KITReplaces: Mercury 84-99215A26,84-813706A26 Kit includes 25 ft.Roll of 7MM Hypalon ignition wire with a metallic core anda large assortment of three different end fittings to fitoutboard motors.

ORDER NO. 018-52250

Extremely Reliable ConstructionThe use of a strong material against a hightemperature and high voltage phenolic resin andspecial rubber gives the plug cover a stable value.

WaterproofSpecial rubber liners on both ends prevent drops ofwater from causing electrical leakage.• 90° Elbow Type

• 14 mm thread• Resistance: 5 k ohmsORDER NO. 076-01003Mfr. No. 8636

14 mm threadRubber sheathed

ORDER NO. 076-01000 Mfr. No. 8381

NGK SPARK PLUG RESISTOR COVERS

NGK SPARK PLUG DISPENSER

NGK Spark Plug Covers for Motorcycles, Scooters,Lawn mowers, Generators, Outboard motors etc.

An Ideal Spark Plug Dispenser.Has 20 compartments with a capacity storage of 16 plugs each giving amaximum display storage of 320 plugs.

ORDER NO. 076-02000Mfr. No. NGK001

IGNITION ACCESSORIES

For more information see: www.ngksparkplugs.com

UNIVERSAL SPARK PLUG BOOTSSupplied complete w/Terminal ConnectorReplaces: OMC 581027, 580339

ORDER NO. 018-57509(10/Pk)

SPARK PLUG ACCESSORIES

985For more information see: www.teleflexmarine.com

PREMIUM MARINE SPARK PLUG WIRE LEADS

JOHNSON/EVINRUDE (OMC)

OE Style boots provide a sealed barrier against heat, dirt and moisture.

ORDER NO. OEM# DESCRIPTION018-88151 582365 4" Spark Plug Wire018-88161 582365 6" Spark Plug Wire018-52311 582365 9" Spark Plug Wire018-88181 582365 12" Spark Plug Wire018-522991+• Universal 22" Spark Plug Wire+ Package of 5• Uses 7mm copper core wire

ORDER NO. OEM# DESCRIPTION018-523091+• Universal 10" Spark Plug Wire018-88391 90 &115 HP Outboard Wire Set018-88401 150 &175 HP Outboard Wire Set

ORDER NO. OEM# DESCRIPTION018-88191 7" Spark Plug Wire018-52281 84-813715AI 9" Spark Plug Wire018-52271� 84-813715AI 9" Spark Plug Wire (7mm)018-522991+• 22" Spark Plug Wire018-523091+• Universal 10" Spark Plug Wire� Metallic core wire+ Package of 5• Uses 7mm copper core wire

ORDER NO. DESCRIPTION018-88191 7" Spark Plug Wire018-52281 9" Spark Plug Wire018-522991+• 22" Spark Plug Wire018-523091+• 10" Spark Plug Wire+ Package of 5• Uses 7mm copper core wire

MERCURY MARINER CHRYSLER FORCE

�1974:Model FF and R only �1974:Model R1 only

FLAGSHIP, INDMAR, MARINE POWER AND MASTERCRAFT

• Kevlar® core for maximum durability and long life.

• Durable stainless steel wound conductor for maximumhorsepower and engine performance.

• Premium silicone jacketing and boots for the ultimate in hightemperature protection.

• Superior RFI suppression for the most sensitiveelectronic system.

• Corrosion resistant stainless steel spark plug and distributorterminals for maximum conductivity.

PREMIUM MARINE WIRE LEADSMagnetic Suppression CoreManufactured for your specific application

Model Ignition Type Cyl. Part #

181 / 3.0L Conventional 4 018-88001

181 / 3.0L EST, EFI 4 018-88111

262 / 4.3L Conventional 6 018-88011

262 / 4.3L EST, EFI 6 018-88101

302 / 5.0L Conventional 8 018-88032�

350 / 5.7L Conventional 8 018-88032

350 / 5.7L EST, EFI 8 018-88201

351 / 5.8L Conventional 8 018-88032�

Model Ignition Type Cyl. Part #

454 / 7.4L Conventional 8 018-88032

454 / 7.4L Conventional 8 018-88171�

454 / 7.4L EST 8 018-88241�

454 / 7.4L EST, EFI 8 018-88201

502 /8.2L Conventional 8 018-88032

502 / 8.2L Conventional 8 018-88171�

502 / 8.2L EST, EFI 8 018-88201

351 / 5.8L Conventional 8 018-88032�

SPARK PLUG WIRE LEADS

986For more information see: www.teleflexmarine.com

Models Cyl. OE # Ignition Type Part # ALL 4 84-816761Q13 Digital 018-88111120 (153 CID) 4 84-816761Q5 Conventional 018-88001140 (181 CID) 4 84-816761Q5 Conventional 018-88001150 L6 84-816761Q8 Conventional 018-88091160 L6 84-816761Q8 Conventional 018-88091165 L6 84-816761Q8 Conventional 018-88091185 CID V6 84-816761Q7 Conventional 018-88011198 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032224 CID 4 84-816761Q6 Conventional 018-88082225 FORD 8 84-816761Q9, 84-816761Q10 Conventional 018-88032225 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032228 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032229 CID V6 84-816761Q7 Conventional 018-88011233 FORD 8 84-816761Q9, 84-816761Q10 Conventional 018-88032250 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032255 FORD 8 84-816761Q9, 84-816761Q10 Conventional 018-88032260 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032260 TR 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041262 CID V6 84-816761Q16 Thunderbolt 018-88101280 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-88032305 CID LH 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041305 CID RH 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041320 EFI 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041330 8 84-816761Q9, 84-816761Q10 Conventional 018-88032330 TR 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041350 CID LH 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041350 CID RH 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041 350 MAG 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041350 MAG SKI 8 84-816761Q4 / 84-816761Q3, 84-816761Q17 Thunderbolt 018-88211350 MAG BRAVO MPI & GEN + 8 84-816608Q71 Delco HEI 018-88361350 MAG MPI MIE (GEN +) 8 84-816608K68 Delco HEI 018-88321350 MAG MPI MIE (GEN +) 8 84-816608Q83 Mercury HEI 018-88341350 MAG EFI SKI 8 84-816608K68 Delco HEI 018-88321350 MAG MPI SKI (GEN +) 8 84-816608Q71 Delco HEI 018-88361BLACK SCORPION SKI (GEN+) 350CID 8 84-816608K68 Delco HEI 018-88321BLACK SCORPION SKI (GEN+) 350CID 8 84-816608Q81 Delco HEI 018-88221MX 6.2 BLACK SCORPION SKI 8 84-816608Q81 Delco HEI 018-88221370 8 84-816761Q9, 84-816761Q10 Conventional 018-88032400 8 84-816761Q9, 84-816761Q10 Conventional 018-88032420 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041420 8 84-847701Q7 Thunderbolt 018-88371425 8 84-847701Q7 Thunderbolt 018-88371440 8 84-816761Q9, 84-816761Q10 Conventional 018-88032454 CID 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041454 MAG 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041454 EFI, Mag MPI and Horizin MIE 8 84-816608K68 Delco HEI 018-88321454 Hi Perf 8 84-816608Q78 Thunderbolt 018-88241460 8 84-816761Q9, 84-816761Q10 Conventional 018-88032465 8 84-847701Q7 Thunderbolt 018-88371496 8 84-881698 Distributorless 018-88381500 8 84-847701Q7 Thunderbolt 018-88371500 Bulldog 8 84-847701Q7 Thunderbolt 018-88371502 Mag 8 84-816608K68 Delco HEI 018-88321502 EFI & Mag MPI 8 84-816608K68 Delco HEI 018-88321525SC 8 84-847701Q7 Thunderbolt 018-88371600SC 8 84-847701Q7 Thunderbolt 018-88371800SC 8 84-847701Q7 Thunderbolt 018-88371888 FORD 8 84-816761Q9, 84-816761Q10 Conventional 018-88032898 GM 8 84-816761Q9, 84-816761Q10 Conventional 018-880322.5L 4 84-816761Q5 Conventional 018-880013.0L 4 84-816761Q5 Conventional 018-880013.0LX 4 84-816761K14 Delco EST 018-883313.7L 4 84-816761Q6 Conventional 018-880823.7XL 4 84-816761Q6 Conventional 018-88082

198 GM185 CID165160150140 (181 CID)120 (153 CID)ALL Models

84-816761Q9, 84-816761Q10884-816761Q7V684-816761Q8L684-816761Q8L684-816761Q8L684-816761Q5484-816761Q5484-816761Q134OE #Cyl.

4 816761Q9, 84-816761Q104-816761Q74-816761Q84-816761Q84-816761Q84-816761Q54-816761Q54-816761Q13E #

0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0DigitalPypeIgnition T

018 88032018-88011018-88091018-88091018-88091018-88001018-88001018-88111Part #

280 GM262 CID

TR260 260 GM255 FORD250 GM233 FORD229 CID228 GM225 GM225 FORD224 CID198 GM

84-816761Q9, 84-816761Q10884-816761Q16V684-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816761Q7V684-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816761Q6484-816761Q9, 84-816761Q108

4-816761Q9, 84-816761Q104-816761Q164-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816761Q74-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816761Q64-816761Q9, 84-816761Q10

0entionalvCon0Thunderbolt0ThunderboltQ610entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon0entionalvCon

018-88032018-88101018-88041018-88032018-88032018-88032018-88032018-88011018-88032018-88032018-88032018-88082018-88032

G MPI MIE (GEN +)350 MAG MPI MIE (GEN +)350 MA

O MPI & GEN +VG BRAAV350 MAG SKI350 MAG350 MA

350 CID RH350 CID LH

TR330 330320 EFI305 CID RH305 CID LH

84-816608Q838N +)84-816608K688N +)84-816608Q718& GEN +84-816761Q4 / 84-816761Q3, 84-816761Q17884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q9, 84-816761Q10884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q618

4-816608Q834-816608K684-816608Q714-816761Q4 / 84-816761Q3, 84-816761Q174-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q9, 84-816761Q104-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q61

Q , Q

0y HEIMercur0Delco HEI0Delco HEI0ThunderboltQ170ThunderboltQ610ThunderboltQ610ThunderboltQ610ThunderboltQ610entionalvCon0ThunderboltQ610ThunderboltQ610ThunderboltQ61

018-88341018-88321018-88361018-88211018-88041018-88041018-88041018-88041018-88032018-88041018-88041018-88041

G454 MA454 CID

440425420420400370

CK SCORPION SKIMX 6.2 BLACK SCORPION SKI (GEN+) 350CIDBLACK SCORPION SKI (GEN+) 350CIDBLA

G MPI SKI (GEN +)350 MAG EFI SKI350 MA

84-816761Q4 / 84-816761Q3, 84-816608Q6184-816761Q4 / 84-816761Q3, 84-816608Q618

84-816761Q9, 84-816761Q10884-847701Q7884-847701Q7884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-816608Q818PION SKI84-816608Q818I (GEN+) 350CID84-816608K688I (GEN+) 350CID84-816608Q718N +)84-816608K688

4 816761Q4 / 84-816761Q3, 84-816608Q614-816761Q4 / 84-816761Q3, 84-816608Q61

4-816761Q9, 84-816761Q104-847701Q74-847701Q74-816761Q4 / 84-816761Q3, 84-816608Q614-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-816608Q814-816608Q814-816608K684-816608Q714-816608K68

0ThunderboltQ61

0ThunderboltQ61

0entionalvCon0Thunderbolt0Thunderbolt0ThunderboltQ610entionalvCon0entionalvCon0Delco HEI0Delco HEI0Delco HEI0Delco HEI0Delco HEI

018 88041018-88041018-88032018-88371018-88371018-88041018-88032018-88032018-88221018-88221018-88321018-88361018-88321

g

g

800SC600SC525SC502 EFI & Mag MPI502 Mag500 Bulldog500496465460

erf454 Hi P454 EFI, Mag MPI and Hor

G454 MA

84-847701Q7884-847701Q7884-847701Q7884-816608K68884-816608K68884-847701Q7884-847701Q7884-881698884-847701Q7884-816761Q9, 84-816761Q10884-816608Q78884-816608K688izin MIEHor84-816761Q4 / 84-816761Q3, 84-816608Q618

4-847701Q74-847701Q74-847701Q74-816608K684-816608K684-847701Q74-847701Q74-8816984-847701Q74-816761Q9, 84-816761Q104-816608Q784-816608K684-816761Q4 / 84-816761Q3, 84-816608Q61

0Thunderbolt

0Thunderbolt

0Thunderbolt

0Delco HEI

0Delco HEI

0Thunderbolt

0Thunderbolt

0lessutoribDistr

0Thunderbolt

0entionalvCon

0Thunderbolt

0Delco HEI

0ThunderboltQ61

018-88371018-88371018-88371018-88321018-88321018-88371018-88371018-88381018-88371018-88032018-88241018-88321018-88041

3.7XL3.7L3.0LX3.0L2.5L898 GM888 FORD800SC

84-816761Q6484-816761Q6484-816761K14484-816761Q5484-816761Q5484-816761Q9, 84-816761Q10884-816761Q9, 84-816761Q10884-847701Q78

-816761Q6-816761Q6-816761K14-816761Q5-816761Q54-816761Q9, 84-816761Q104-816761Q9, 84-816761Q104-847701Q7

0entionalvCon

0entionalvCon

0Delco EST

0entionalvCon

0entionalvCon

0entionalvCon

0entionalvCon

0Thunderbolt

018-88082018-88082018-88331018-88001018-88001018-88032018-88032018 88371

SPARK PLUG WIRE SETSMERCURY

IGNITION SPARK PLUG WIRE SETS

987For more information see: www.teleflexmarine.com

OMC/OMC COBRA

VOLVO-PENTA

� 1974:Model FF and R only� 1974:Model R1 only� 1975:Model A1 only

� Model M only � Models w/o closed cooling � V-Drive model w/closed cooling

� Direct Drive Model w/closed cooling� 1990 Models 302BMRPWS

and 302BPRP WS

� 1990 (2 BBL) carb � 7mm Wire Set� For Models with Mallory Side Terminal Design

Model Cyl. OE# Part # AQ120B 4 875571 018-88131 �

AQ125A,B 4 875571 018-88131 �

AQ131A-D 4 875571 018-88131 �

AQ140A 4 875571 018-88131 �

AQ145A,B 4 875571 018-88131 �

AQ151A-C 4 875571 018-88131 �

AQ175A V6 876532-3 018-88011

AQ190A 8 8757166-7 018-88021

AQ190A 8 8757166-7 018-88231 �

AQ200B-F 8 8757166-7 018-88021

AQ200B-F 8 8757166-7 018-88231 �

AQ205A V6 876532-3 018-88011

AQ211A 8 8757166-7 018-88021

AQ211A 8 8757166-7 018-88231 �

Model Cyl. OE# Part # AQ225B,D 8 8757166-7 018-88021

AQ225B,D 8 8757166-7 018-88231 �

AQ231A,B 8 8757166-7 018-88021

AQ231A,B 8 8757166-7 018-88231 �

AQ240A 8 8757166-7 018-88021

AQ240A 8 8757166-7 018-88231 �

AQ255A-F 8 8757166-7 018-88021

AQ255A-F 8 8757166-7 018-88231 �

AQ260A,B 8 8757166-7 018-88021

AQ260A,B 8 8757166-7 018-88231 �

AQ271A-D 8 8757166-7 018-88021

AQ271A-D 8 8757166-7 018-88231 �

AQ290A 8 8757166-7 018-88021

Model Cyl. OE# Part # AQ290A 8 8757166-7 018-88231 �

AQ311A,B 8 8757166-7 018-88021

AQ311A,B 8 8757166-7 018-88231 �

BB140A 4 875571 018-88131 �

BB145A 4 875571 018-88131 �

BB225A-C 8 8757166-7 018-88021

BB225A-C 8 8757166-7 018-88231 �

BB231A 8 8757166-7 018-88021

BB231A 8 8757166-7 018-88231 �

BB260A-C 8 8757166-7 018-88021

BB260A-C 8 8757166-7 018-88231 �

BB261A 8 8757166-7 018-88021

BB261A 8 8757166-7 018-88231 �

Engine Cyl. Year Part # OE # 2.3L 4 1987-90 018-88071 5037472.5L 4 1982-86 018-88001 5037483.0L � 4 1982-90 018-88001 5037483.0L/3.0L HO 4 1991-92 018-88141 5037493.8L V6 1981-86 018-88011 5037504.3L � V6 1985-90 018-88011 5037505.0L 8 1982-88 018-88021 503752, 5037555.0L 8 1989-90 018-880615.7L 8 1982-89 018-88021 503752, 5037555.7L King Cobra 8 1988 018-88021 503752, 5037555.8L 8 1989-90 018-880617.5L 8 1987 018-88032 503752King Cobra 8 1987 018-88032 50375280 4 1968-69 018-88001 503748100 4 1972-73 018-88001 503748110 4 1964 018-88001 503748120 � 4 1965-74 018-88001 503748120 � 4 1974-81 018-88001 503748140 � 4 1973-74 018-88001 503748140 � 4 1974-81 018-88001 503748140 Jet 4 1973 018-88001 503748175 � 8 1975-77 018-88051185 8 1978-80 018-88021 503752, 503755190 � 8 1975-77 018-88051

Engine Cyl. Year Part # OE # 200 8 1979-81 018-88021 503752, 503755225 8 1978 018-88021 503752, 503755225 � 8 1976 018-88021 503752, 503755230 8 1979-81 018-88021 503752, 503755230 IB LH 8 1976 018-88021 503752, 503755230 IB RH 8 1976 018-88021 503752, 503755235 8 1975-77 018-88051240 8 1978 018-88051250 8 1979 018-88051260 � 8 1979-81 018-88021 503752, 503755260 LH 8 1976 018-88021 503752, 503755260 IB RH 8 1976 018-88021 503752, 503755262 King Cobra V6 1989 018-88011 503750 305 CID IB LH � 8 1979-82 018-88021 503752, 503755305 CID IB RH � 8 1977-82 018-88021 503752, 503755305 CID IB RH � 8 1979-82 018-88021 503752, 503755305 CID IB LH � 8 1977-82 018-88021 503752, 503755350 CID IB RH � 8 1977-82 018-88021 503752, 503755350 CID IB RH � 8 1979-82 018-88021 503752, 503755350 King Cobra 8 1989 018-88021 503752, 503755370 King Cobra 8 1988 018-88032 503752 454 CID IB 8 1979-82 018-88021 503752, 503755460 King Cobra 8 1988-89 018-88032 503752

Models Cyl. OE # Ignition Type Part # 4.3L V6 84-816761Q16 Thunderbolt 018-881014.3XL V6 84-816761Q16 Thunderbolt 018-881014.3L EFI(TBI) V6 84-816761Q16 Thunderbolt 018-881014.3L MPI V6 84-816608Q82 Delco HEI 018-883515.0L 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880415.0L IB 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880415.0LX 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880415.0L Alpha & Bravo(Gen+) 8 84-816761Q3, 84-816761Q4, 84-816761Q17 Thunderbolt 018-882115.0L MIE MPI 8 84-863656A1 Delco HEI 018-882815.7L 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880415.7L IB 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880415.7L SKI 8 84-816761Q12 Conventional 018-880217.4L 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-880417.4L IB 8 84-816761Q4 / 84-816761Q3, 84-816608Q61 Thunderbolt 018-88041

5.0L IB5.0L4.3L MPI4.3L EFI(TBI)4.3XL4.3LModels

VVBI)VV

C

84-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816608Q82V684-816761Q16V684-816761Q16V684-816761Q16V6OE #Cyl.

Thunderbolt84-816608Q61Thunderbolt84-816608Q61Delco HEI

ThunderboltThunderboltThunderbolt

yTIgnition

bolt 018-88041bolt 018-88041EI 018-88351bolt 018-88101bolt 018-88101bolt 018-88101ype t #arP

2.3LEngine

7.4L IB7.4L5.7L SKI5.7L IB5.7L5.0L MIE MPI5.0L Alpha & Br5.0LX

018-880711987-904t #arPearYYearCyl.

MPIo(Gen+)vaav& Br

OMC/OMC COBRA

503747071OE #

200Engine

84-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q12884-816761Q4 / 84-816761Q3, 84-816608Q61884-816761Q4 / 84-816761Q3, 84-816608Q61884-863656A1884-816761Q3, 84-816761Q4, 84-816761Q17884-816761Q4 / 84-816761Q3, 84-816608Q618

018-880211979-818tarPearYYearCyl.

Thunderbolt84-816608Q61Thunderbolt84-816608Q61

entionalvConThunderbolt84-816608Q61Thunderbolt84-816608Q61Delco HEI

Thunderbolt84-816761Q17Thunderbolt84-816608Q61

503752, 50375588021OE ##

bolt 018-88041bolt 018-88041onal 018-88021bolt 018-88041bolt 018-88041EI 018-88281bolt 018-88211bolt 018-88041

aKing Cobr7.5L5.8L5.7L King Cobr5.7L5.0L5.0L4.3L3.8L3.0L/3.0L HO3.0L2.5L

018-88001018-8803219878018-8803219878018-880611989-908018-8802119888aobr018-880211982-898018-880611989-908018-880211982-888018-880111985-90V6�

018-880111981-86V6018-881411991-924O018-880011982-904�

018-880011982-864

001503752032503752032

061503752, 503755021503752, 503755021

061503752, 503755021503750011503750011503749141503748001503748001

262 King Cobr260 IB RH260 LH260250240235230 IB RH230 IB LH230225225

018 8018-880111989V6aCobr018-8802119768018-8802119768018-880211979-818�

018-8805119798018-8805119788018-880511975-778018-8802119768018-8802119768018-880211979-818018-8802119768�

018-8802119788

8802150375088011503752, 50375588021503752, 50375588021503752, 50375588021

880518805188051

503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021

190185175140 Jet14014012012011010080

018-880511975-778�

018-880211978-808018-880511975-778�

018-8800119734018-880011974-814�

018-880011973-744�

018-880011974-814�

018-880011965-744�

018-8800119644018-880011972-734018-880011968-694

AO-PENTTAVOLLVV

051503752, 503755021

051503748001503748001503748001503748001503748001503748001503748001503748001

460 King Cobr454 CID IB370 King Cobr350 King Cobr350 CID IB RH350 CID IB RH305 CID IB LH305 CID IB RH305 CID IB RH305 CID IB LH

018-880321988-898aCobr018-880211979-828B018-8803219888aCobr018-8802119898aCobr018-880211979-828�B RH018-880211977-828�B RH018-880211977-828�B LH018-880211979-828�B RH018-880211977-828�B RH018-880211979-828�B LH

50375288032503752, 5037558802150375288032503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021503752, 50375588021

Q200B-FAQ200B-FAQ190AAQ190AAQ175AAQ151A-CAQ145A,BAQ140AAQ131A-DAQ125A,BAQ120BA

Model y

�018-882318757166-78

018-880218757166-78�018-882318757166-78

018-880218757166-78

018-88011876532-3V6�018-881318755714�018-881318755714�018-881318755714�018-881318755714�018-881318755714�018-881318755714

t #arPOE#Cyl. y,

,

,08757166-78Q271A-DA

08757166-78Q260A,BA

08757166-78Q260A,BA

08757166-78Q255A-FA

08757166-78Q255A-FA

08757166-78Q240AA

08757166-78Q240AA

08757166-78Q231A,BA

08757166-78Q231A,BA

08757166-78,DQ225BA

08757166-78,DQ225BAOE#Cyl.Model

018-88021�018-88231

018-88021�018-88231

018-88021�018-88231

018-88021�018-88231

018-88021�018-88231

018-88021t #arP y

88BB260A-C88BB260A-C88BB231A88BB231A88BB225A-C88BB225A-C

4BB145A4BB140A

88Q311A,BA88Q311A,BA88Q290AA

Cyl.Model

�018-882318757166-7

018-880218757166-7�018-882318757166-7

018-880218757166-7�018-882318757166-7

018-880218757166-7�018-88131875571�018-88131875571�018-882318757166-7

018-880218757166-7�018-882318757166-7

t #arPOE#

1975:Model �1974:Model R1 only�1974:Model FF and R only�

Q211AAQ211AAQ205AA

-Drive model w/closed coolingV�Models w/o closed cooling�Model M only�

onlyA1 del del R1 onlydel FF and R only

�018-882318757166-78

018-880218757166-78

018-88011876532-3V6

WSand 302BPRP1990 Models 302BMRPWS �Direct Drive Model w/closed cooling�

closed coolingd cooling

08757166-78Q290AA

08757166-78Q271A-DA

For Models with Mallory Side �7mm Wire Set�1990 (2 BBL) carb�

MRPWS w/closed cooling

018-88021�018-88231

88BB261A88BB261A

erminal DesignTTerminal DesignMallory Side

b

�018-882318757166-7

018-880218757166-7

SPARK PLUG WIRE SETS (Continued)MERCURY (Continued)

OMC/OMC COBRA

VOLVO - PENTA

IGNITION SPARK PLUG WIRE SETS

988

ALUMINIUM AUXILIARY MOTOR BRACKET FOR 4-STROKE MOTORS

• Easier to lift and lower - Stainless springs helpcounterbalance motor weight• Transom mount locks and holds motor up or swingsdown for propulsion• Built-in transom angle adjustment allows optimummotor performance

Mfr. No. 71056HP Rating Over 7-1/2 to 20 HPMotor Weight Not to exceed 115 lbs.Vertical travel* 11-1/4" (29cm)Mtg. Pad PolyMtg. Board Dim. 11-1/2" (29cm)W x 10-3/4" (27cm)H x 2" (5cm)Mtg. Brkt. dim. 7-5/8" (19cm)W x 9" (20cm)HORDER NO. 459-71056

4-Stroke Motor Bracket• Black satin anodized aluminum bodyresists corrosion• Built especially for new 4-Stroke, heavier, hightorque motors.• 2" thick, extra wide black poly mounting board• Extra wide track body for added stability• Aircraft Type S/S hardware• Motor safety cable included for addedprotection

• Fits all style motors - Extra wide 11-1/2" (29cm)Black poly mounting board for newer, wider style motorlocking clamps• 4-position locking height adjustment• Wide track body for added stability• Made of tough 304 stainless steel• Stainless mounting hardware included

Easier to Operate and Lift• 5 vertical running position lock bar to compensate for watersurface and boat load conditions. Hard coated for added resistanceto wear• Twist Lock safety knobs secure bracket in place• Heavy duty stainless steel torsion springs help counterbalancemotor’s weight• Easier to hold with comfortable soft Hypalon grip handle designedto accept most style outboard motor locks

*Vertical Travel is based on transom anglebeing perpendicular to the water

Mounting Pad• 2" thick x 11-1/2" wide (5 x 29cm).Designed to also accommodate the widthdimensions of late model auxiliaryoutboard motors.

*Vertical Travel is based on transom anglebeing perpendicular to the water

• Retractable bracket for trolling auxiliary motors onpower and sailboats with ease• Transom mount locks and holds motor up or swingsdown for propulsion• Tough alloy anodized aluminum frame, stainless steelsprings

Mfr. No. 71057HP Rating Over 7-1/2 to 20 HPMotor Weight Not to exceed 115 lbs.Vertical travel* 11-1/4" (29cm)Mtg. Pad PolyMtg. Board Dim. 11-1/2" (29cm)W x 10-3/4" (27cm)H x 2" (5cm)Mtg. Brkt. dim. 5-1/4" (13cm)W x 9" (23cm)HORDER NO. 459-71057

• Fits all style motors - Extra wide 11-1/2" (29cm)Black poly mounting board• 4-position locking height adjustment• Stainless mounting hardware included

Mounting Pad• 2" thick x 11-1/2" wide (5 x 29cm).Designed to accommodate the widthdimensions of newer, wider style motorlocking clamps.

*Vertical Travel is based on transom anglebeing perpendicular to the water

For more information see: www.garelick.com

STAINLESS STEEL AUXILIARY OUTBOARD MOTOR BRACKETFOR 2-STROKE MOTORS

ALUMINUM AUXILIARY MOTOR BRACKET FOR 2-STROKE MOTORS

459-71091

459-71090

ORDER NO. Mfr. No. H.P. Rating Motor WeightNot to Exceed Vertical Travel* Mounting

Pad

Mtg. Brkt.DimensionsW x H

459-71091 71091 Over 7-1/2 to 25 175 lbs. 15-1/2" (39 cm) Poly 10" x 9-3/4"

459-71090 71090 Over 7-1/2 to 30 169 lbs. 9-1/2" (24 cm) Poly 8" x 9"

OUTBOARD MOTOR BRACKETS

989

HYDRA POWERED ASSISTED OUTBOARD MOTOR BRACKET

MANUAL OPERATED “EASY PUMP” HYDRAULIC LIFTOUTBOARD MOTOR BRACKET

For more information see: www.garelick.com

Designed for the DiscriminatingBoater/Fisherman Who Wants the Best!• Effortless operation - raises and lowersauxiliary motors in less than 30 seconds.• 12 volt self-contained marinizedhydraulic actuator• Designed for 4-stroke motors, wide stanceprovides stability.• Heavy duty 1/2" thick 6061 T6 structuralaluminum extrusion.• Triple coat protective finish(anodized, E Coat, powder coated).

• Aircraft stainless steel hardware andengineered bronze bushings at pivotpoints for increased ease of operation anddurability.• 2000 lbs. tensile strength motor safetycable included.• 1/2 - 20 x 4-1/2" stainless steel mountinghardware included.• Wiring harness and operating controlswitch included.

The Latest Technology• Engineered and designed from over25 years of experience in building qualityoutboard motor brackets.• Tested by a leading marinemotor manufacturer.

Specifications:Model No: 71096H.P. Rating: 25 to 40Motor Wt. not to exceed 248 lbs.Vertical Travel:* 13-1/4" (33cm)Mtg. Pad: Poly/Alum

Mounting Board Dimensions:15-3/4" W x 14" H x 2” T (40 x 35 x 4 cm)Mounting Bracket Dimensions:16-1/4" W x 9.5" H (41 x 24 cm)* Vertical Travel is based on transom anglebeing perpendicular to the waterORDER NO. 459-71096Mfr. No. 71096

Up Middle Down

PUSH BUTTON

•Raise and lower trolling and auxiliary motors on power boats and sailboats with ease•New generation motor bracket lifts up to 4 stroke motors with short side to sidemovement of a lever handle (removable for stowage). This simple movementactivates a marinized manual hydraulic lift pump inside the body of the bracket• Release valve lowers the bracket down into operating position• 14" of continuous vertical height adjustment provides optimum trimadjustment for any water surface or boat load conditions• Eliminates the inconveniences of conventional spring loaded models;No electrical wiring required•High Tensile Alloy - Black satin Anodized aluminum body to resist corrosion•Aircraft stainless steel hardware and engineered bronze bushings atpivot points for increased ease of operation and durability• Heavy-Duty stainless steel hardware for increased durability• 2" Thick Poly Mounting Board•Wide Track Design for added stability and strength• 2,000 lbs. Tensile strength motor safety cable included

ORDER NO. 459-71092 Mfr. No. 71092

Down PositionUp Position Marinized Stainless Steel Actuator Simple Right/Left Pump Action

Specifications:Model No: 71092H.P. Rating: 7-1/2 to 25Motor Wt. not to exceed 175 lbs.Vertical Travel:* 14" (36cm)Mtg. Pad: Poly

Mounting Board Dimensions:15-3/4" W x 14" H x 2" T(40 x 35 x 4 cm)Mounting Bracket Dimensions:11" W x 9-3/4" H (28 x 25 cm)*Vertical Travel is based on transomangle being perpendicular to the water

OUTBOARD MOTOR BRACKETS

990For more information see: www.marinetechproducts.com

Mfr. No. 55-0020AORDER NO. 945-50020A

Mfr. No. 55-0021ORDER NO. 945-50021

ADJUSTABLE OUTBOARDMOTOR BRACKET

•Up to 20 hp or 115 lbs max. weight• Constructed of stainless steel• Can be adjusted for use on positive angle transoms•Manual power with heavy duty spring assist• 11" of travel with 4 stops• Pad size: 10.75" x 11.5" (Replacement No. 099-55651)•Mounting hardware included•Weight: 15 Ibs.Note: Not to be used with 4 stroke engines

ADJUSTABLE OUTBOARDMOTOR BRACKET

•Up to 20 hp or 115 lbs max. weight• Constructed of heavy duty, light weight aluminum•Designed for freshwater use on both powerboats & sail boats•Manual power with spring assist• 11" of travel with 5 stops• Setback: 7.75" • Weight: 12 Ibs.Note: Not to be used with 4 stroke engines

Mfr. No. 55-0027 ORDER NO. 945-50027

4-STROKE OUTBOARD BRACKETS

4-STROKE LIGHTWEIGHT BRACKETS

TRANSOM ADAPTER PLATE• For use with models 945-50021 & 945-00012•Allows you to easily install and removeyour outboard motor bracket within seconds• Stainless steel construction• Adjustable mounting holes• Features hole for padlock to prevent theft•Mounting hardware includedDIMENSIONS:Motor Plate: 9-1/4"H x 7-1/2"W x 1-3/4" ThickWeight: 3 Ibs.Note: Not to be used with 4 stroke engines

•Up to 35 hp or 263 lbs. max. weight• Anodized aluminum bracket is built to handle theincreased weight and torque output of today’s fourstrokes with long or short shafts• Hand-adjustable with just the turn of a knob,stainless steel torsion springs counterbalancemotor weight making adjustments a breeze• 2" thick, extra wide mounting board, along withaircraft-type stainless steel hardware• Spring assist • 8" setback • Weight: 20 Ibs.

• Up to 15 hp or 132 lbs. max. weightNote: 2-Stroke motors up to 20hp - (55-040SS model only)

• Built extra tough & extra wide• Stainless torsion springs for easy lifting• 2" thick, maintenance-free polypropylene mounting board•Rated for long or short shaft engines

Mfr. No. 55-0023 ORDER NO. 945-50023

ORDER NO. Mfr. No. Description945-50410 55-0410 5 Vertical Running Positions

10" travel(Replacement Pad No. 099-55651)

945-50416 55-0416 4 Vertical Running Positions16" Travel

ORDER NO. Mfr. No. Description945-04070 55-0407AL Adjustable 5 Vertical RunningALUMINUM Positions, 10" travel

Setback: 8",Overall size: 8.50" W x 21"H

945-04080 55-0408SS Adjustable 4 Vertical RunningSTAINLESS STEEL Positions, 11" travel

Setback: 7.25" (at top position)Overall size: 7.25" W x 21.5"H

OUTBOARD MOTOR BRACKETALUMINUM MAX 12HP – 2 STROKE• Heavy duty, lightweight aluminum bracket• Designed for motors up to 12 hp or 82 lbs.• Manual lifting with spring assist• 14" of travel with 5 stops• Pad size: 8.25" x 10.5"• Setback: 7.75"• Mounting hardware included• Replaces 55-0022Note: Not to be used with 4 stroke engines

MOTOR LIFTS

Mfr. No. 55-0010 ORDER NO. 945-50010

ADJUSTABLE OUTBOARDMOTOR BRACKET•Up to 10 hp or 80 lbs max. weight• Constructed of stainless steel with spring assist for easy lifting•Manual lifting required to raise and loweryour auxiliary outboard motor• 14" travel• Pad size: 8.5" x 10.5" (Replacement No. 099-55650)•Mounting hardware included•Weight: 9 Ibs.Note: Not to be used with 4 stroke engines

FIXED OUTBOARD MOTOR BRACKET• Fits 2 stroke and 4 stroke motors weighing up to 150 Ibs.• Constructed of 1/4" heavy duty fabricated aluminum• This economical fixed motor bracket is designedspecifically for the weekend fisherman• Features an 8" setback and a black anodized finish• 5" high adjustment to accomodate short shaft motors• To provide adequate support, the transom side of thebracket must be fully covered by the boat’s transom.

DIMENSIONS:Motor Plate Adjustable: 12" x 14.75" x 1/4"

or 12" x 19.25" x 1/4"Weight: 19 Ibs.Transom Plate: 10" x 12" x 1/2" (2) height adjustments

945-04080

945-04070

OUTBOARD MOTOR BRACKETS

Mfr. No. 55-0012 ORDER NO. 945-00012

991

PRO STRAP KICKER TIE DOWNThe Panther Pro-Strap provides hands-free, heavy dutyretention for the Model 35.

ORDER NO. 935-51500Mfr. No. 55-1500

INTEGRAL TRIM AND TILT – MODEL 25The Integral Trim and Tilt Model 25 is made to provide trim and tilt features onmotors that don't have factory trim and tilt.

• Designed to work with Johnson and Evinrude Two-Stroke outboards.• Motors made from 1976 to 2004.• Horse Power Ratings of 20, 25, 28, 30 and 35.• Locking Shallow Water Drive (Flip Switch) must be on the side of the motor not the front.Relay Control ORDER NO. 934-55022

ORDER NO. 934-00025 Mfr. No. 55-0025

BOTTOM WIDTH

TRANSOM HEIGHTTRANSOM SET BACK

TRIM AND TILT - MODEL 40

The Model 40 is a heavy duty fabricatedaluminum bracket.It will hold 2 and 4 stroke motors up to 150lbs.8” setback - weighs 21lbs.

ORDER NO. 934-55040Mfr. No. 55-0040

TRIM AND TILT - MODEL 55Perfectly designed for pontoons, fishing, orpleasure boats, the Trim & Tilt provides anadditional five degrees of negative tuck forimproved hole shot. Adapts to clamp on orbolt-through outboards.Standard BIA bolt pattern.

ORDER NO. 934-00055Mfr. No. 55-0055

TRIM AND TILT - MODEL 135For outboards up to 135hp or 350 pounds, theHeavy Duty Trim & Tilt maximizes lifting power(even greater than the outboard's tilt range). Italso allows for increased tuck-under to getheavy boats on plane quickly.

ORDER NO. 934-00135Mfr. No. 55-0135

AUXILIARY MOTOR LIFT - MODEL 35- 13" SETBACKKicker motors are supported in any position with this durable design.In addition to its ruggedness, the Model 35 is the only kicker motorlift with a convertible setback.It can be adjusted from 7 to 13 inches ofsetback, making it ideal for inboards

ORDER NO. 934-00035Mfr. No. 55-0035

For more information see: www.marinetechproducts.com

Product FeaturesModel 40 Model 55 Model 135 Model 35Trim & Tilt Trim & Tilt Trim & Tilt Remote Auxiliary Motor Lift

FOR USE WITH TYPE OF OUTBOARD MOTOR Bolt or Clamp-on Bolt or Clamp-on Bolt or Clamp-on Clamp-on Only

MAXIMUM HORSE POWER RATING Up to 40 HP Up to 55 HP Up to 135 HP Up to 40 HP

MAXIMUM RECOMMENDED MOTOR WEIGHT 150 lbs (55 kg) 250 lbs (115 kg) 350 lbs (160 kg) 150 lbs (55 kg)

LIFT RANGE 30˚ 60˚ Tilt Only 5˚Tuck, 60˚Tilt 5˚ Tuck, 60˚Tilt 30˚ - 60˚ Tilt Only

DIMENSIONS: TOP WIDTH 10.5" (26.6 cm) 15" (38 cm) 15" (38 cm) 11" (18 cm)

10.5" (26.6 cm) 10" (25 cm) 10" (25 cm) 10" (18 cm)

12" (30 cm) 12" (30 cm) 14" (36 cm) 11" (18 cm)

7" (18 cm) 7" (18 cm) 7" (18 cm) 7.5" to 13" (18.4 to 39 cm)

ELECTRICAL REQUIREMENTS 12 VDC 12 VDC 12 VDC 12 VDC

TYPICAL & MAXIMUM AMP DRAW 5 to 20 Amps 5 to 20 Amps 5 to 20 Amps 5 to 20 Amps

Relay Control ORDER NO. 934-55022 934-55022 934-55022

ORDER NO. 934-55040 934-00055 934-00135 934-00035

UNIVERSAL LIFT GAUGEThis unit is truly universal and will fit any JackPlate or trim and tiltunit, providing accurate indication of the trim or tilt that is occurring.

ORDER NO. 935-51100Mfr. No. 55-1100

TRIM AND TILT & ACCESSORIES

992For more information see: www.thmarine.com

For more information see: www.sea-dog.com

Mfr. No. 13001ORDER NO. 205-13001

Mfr. No. 52100ORDER NO. 205-52100

KICKER OUTBOARD MOTOR BRACKETS• Lifts auxiliary outboards/kicker outboards with ease• Aluminum bracket with stainless steel spring•Great for kicker motors/auxiliary motors• Sturdy molded mounting blockORDER NO. Mfr. No. Max HP Max.Weight205-00008 KMB-8-DP 8 59205-00012 KMB-12-DP 12 82205-00020 KMB-20-DP 20 115

ORDER NO. Mfr. No. Set Back205-66606 AHJ-6V-DP 6"205-66610 AHJ-10V-DP 10"

ELECTRIC HYDRAULIC TILT N’ TRIMPT-130 FEATURES:

•Rated for 130 HP and smaller motors• 6" set back to enhance boat stability and performance• 20˚ of trim and a total 90˚ of trim and tilt• 1/2" 6061 T6 extruded aluminum construction withstainless steel fasteners• Electric hydraulic actuator rated at 7853 Ibs. of thrust!• Standard B.I.A. bolt hole pattern• Convenient adapter kit available for clamp-on motors• Four stainless steel motor mounting bolts included•Weighs 40 Ibs.

PT-35 FEATURES:

•Rated for 35 HP and smaller motors• 5-1/2" set back to enhance boat stability and performance• 84˚ of trim and tilt• 1/4" 6061 T6 extruded aluminum construction withstainless steel fasteners• Electric hydraulic actuator rated at 7853 Ibs. of thrust• Accomodates clamp-on or bolt-on motors without theneed of an adapter•Weighs 24 Ibs.

ATLAS™ SERIES HYDRAULIC JACK PLATEST-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today,even the big four strokes. Our innovative high tech engineered polymer rod and slot lifting design guarantees trouble free action. This platealso features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds:Speed and self contained lifting action.• Self contained hydraulic pump system - No reservoir or lines to install• Fast! - 8 second lift time•Rod and slot lifting design - Trouble free lifting action•Hi-Tech engineered polymer rods - 6 times more abrasion resistant than steel• Rods made from self lubricating material• Easy two-pin pump removal - Quick maintenance• Installs in half the time of comparable jack plates• All V6 - 300 hp Max

ORDER NO. Mfr. No. A B C Colour HP Rating423-27150 327150-1 1-9/16" 6-11/16" 6-11/16" White 8 hp (2-cycle only)423-27151 327151-1 1-9/16" 6-11/16" 6-11/16" Black 8 hp (2-cycle only)

RAIL MOUNT MOTOR BRACKETInjection Molded PolypropyleneDesigned to hold small outboards up to 8 HP (2-cycle only) upright on the stern rail. Brackets will fit both 7/8"and 1" rails as well as rails using 90° tee fittings. The two piece unit is made of UV stabilized polypropylene andcomes complete with fasteners. Extra holes enable the use of a recommended safety chain to secure the motor. Itcan also be used as a mounting platform for barbecues, downrigger brackets, fish cleaning tables, etc.

MOTOR BRACKETS/JACK PLATES

993For more information see: www.thmarine.com

MINI-JACKER™• "Clamp Style" Small Outboard Jack Plate• Cast Aluminum Bracket• Marine Grade Transom Block• 4" Setback – 3" Vertical• Max Wt – 150 lbs Max HP – 35

ORDER NO. 205-50001Mfr. No. MJ-1-DP

ORDER NO. Mfr. No. Description205-00602 HYJ-6C-DP HYDRO-JACKER™ - 6" Setback205-01002 HYJ-10C-DP HYDRO-JACKER™ - 10" Setback205-06077 6077 GAUGE KIT ONLY (for Hydro-Jacker)

ORDER NO. Mfr. No. Setback205-00601 JPZ-6-DP 6" Setback205-00801 JPZ-8-DP 8" Setback205-01004 JPZ-10-DP 10" Setback

PRO HI-JACKER™Jacking Plates

• Locking Bars Allow One Wrench Adjust• Mirror Finish• Maximum 175 HP Outboards• 4" Vertical Adjustment• High Strength Aluminum – 3/8" Thick• One-Piece Design – Top Adjust• 6" Set back

ORDER NO. 205-00600Mfr. No. JP-6PW-DP

BOLT KIT FOR JACKING PLATES• For Mounting Outboard to PlateKit Contains:4 each 1/2" – 13 x 3" long bolts – stainless steel4 each 1/2" – 13 lock nuts – brass with nylon insert8 each 1/2" – flat washers – stainless steelORDER NO. 205-40001Mfr. No. BK-1-DP

HYDRO-JACKER™Hydro Jacker HydraulicJacking Plate

• Full Self-Contained Hydraulic Pump• Angled to allow for full engine tilt• Plates Available in 6" and 10" Setback• Full 5" Vertical Rise• Anodized for Protection from Salt Corrosion• Gauge Kit Available• All V6 engines - 300 HP Max

Z-LOCK™ MANUAL JACK PLATES

• Z-Lock™ design providesmaximum strength

• Prevents side slippage and movement• Strong aircraft grade aluminum• Full 1/2" material for strength• Handles all V6 outboards to 300 HP• Easily adjusts up or down with centre bolt

HI-JACKER™Jacking Plate

• 3/8" Aluminum– Two Piece Design

• Natural Aluminum Finish• Dual Stainless SteelAdjustment Rods

• Maximum 150 HP V4 & V6 Outboards• 6" Setback – 4" Vertical Lift

ORDER NO. 205-30001Mfr. No. JP-1A-DP

JACK PLATES & ACCESSORIES

994For more information see: www.sceptermarine.com

1/2'' STAINLESS STEEL ENGINE MOUNTING BOLTS

The thread length is 1-1/2" on all bolts.Standard pack two (2) bolts per package.

A. 3/8" N.F. Nylon LockStainless Steel Nuts (Thin)Standard Pack- Ten (10) Per PackageORDER NO. 098-00151

B. 3/8" N.F. Nylon LockStainless Steel Nuts (Thick)Standard Pack- Ten (10) Per PackageORDER NO. 098-00152

C. 1/2" N.C. Standard NutStandard Pack- Ten (10) Per PackageFor Engine Mounting BoltsORDER NO. 098-00157

SEE FASTENER PAGESFOR BOXES OF (BULK)

STAINLESS BOLTS & NUTS

TRANSOM BOLT SUPPORT PLATESCast aluminum with polished T&R Marine lettering. Preventsthe bolts from working into the transom. Adds strength totransom, fits standard bia bolt pattern.

KIT - Upper and lower support platesORDER NO. 098-00090

TRANSOM ELEVATORSConstructed of 3/16" aluminum. Allows long shaft engine to beused on short shaft boat transom.Raises engine 5''. For all clamp on engines up to 40 HP.

For boats with 1-3/4" thick transomORDER NO. 098-00217

For boats with 2" thick transomORDER NO. 098-00218

COLOUR - Silver

B. C.A.

UPPER

LOWER

TRANSOM PROTECTOR

Two piece plated aluminum transom protector fits alltransoms for added protection and strength. Easy to installand prevents mounting bolts from working into transom.

ORDER NO. 098-00030

TRANSOM PAD

• Rubber pad is oil and weather resistant• Reduces motor vibration noise• Fits most outboards to 25hp• Protects transom

ORDER NO. 615-99074-10Mfr. No. 07517

For more information see: www.trmarine.com

STAINLESS STEEL REPLACEMENT NUTSFOR ALL STEERING LINK ARMS

Description Bolt Length ORDER NO.N.C. THREADS 5-1/2" 098-00153N.C. THREADS 5" 098-00154N.C. THREADS 4-1/2" 098-00155N.C. THREADS 4" 098-00156N.C. THREADS 3-1/2" 098-00158N.C. THREADS 2" 098-00159

15"

15"

9"

TRANSOM ACCESSORIES

995

ORDER NO. Mfr. No. DESCRIPTION

205-60002 HF-1T-DPHOT FOOT™ Pro Top Load Foot ThrottleFits: OMC, OMC Ficht, Mercury, Mariner

205-62002 HF-1CT-DPHOT FOOT™ Pro Top Load Foot ThrottleFits: Chrysler/Yamaha

205-60011 HFS-1-DPHOT FOOT™ Throttle Replacement Spring(all models)

ORDER NO. Mfr. No. DESCRIPTION

205-61111 HF-1-DPHOT FOOT™ Throttle - Universal ModelFits all marine engines

205-60011 HFS-1-DPHOT FOOT™ Throttle Replacement Spring(all models)

REPLACEMENT SKEG• Solid Cast Aluminum• Welds to Lower Units• Easily Cut to Shape

TORQUE TABSA simple solution to eliminate or reduce right hand steeringtorque caused by directional rotation of propeller. The TorqueTab is inexpensive, simple to install, and does not reduce speed.Cast aluminum construction complete with installationhardware and instructions.ORDER NO. 205-22001Mfr. No. TAB-1-DP

HOT FOOT™FOOT THROTTLE• Number One Throttle on Marketfor Over 20 Years• Provides Added Safety & Performance• All Cast Aluminum – Stainless Steel Hardware• Nylon & Teflon Bushings on allCritical Pivot Points• Patented Idle Stop forFICHT & Optimax Engines• Requires Longer Throttle Cable (Not Included)

HOT FOOT™ PRO TOPLOAD FOOT THROTTLE• Improved Safety & Throttle Control• Attractive Full Colour Pedal Graphics• Topside Cable Connections• Patented Idle Stop for FICHT & Optimax• Stainless Steel Hardware with TeflonBushings• Requires longer throttle cable(Not included)

HOT FOOT™SLIDE MOUNT• Easy Adjustment of Hot Foot™• Stainless Steel Fasteners & Release Pin• Allows Over 5" of Slide Adjustment

ORDER NO. 205-00001Mfr. No. HFM-1

TRANSOM SUPPORT PLATEThe Transom Support Plate is made of highquality cast aluminum. This plate distributes thestress of the motor mounting bolts to protectthe transom. The plate can be furnished withyour desired name in quantities of 50 or more.A generic plate with no lettering is standard.ORDER NO. 205-21001Mfr. No. TSP-1

PATENTED IDLE STOPFOR FICHT & MERCURY OPTIMAX ENGINE

NOSE CONE• Reduces Drag• Cast Aluminum• Weld on or EpoxyORDER NO. 205-80001Mfr. No. NC-1-DP

TRANSOM WEDGEThese Transom Wedges fit newer model OMCand Mercury engines. Bolt-on engines withfactory installed tilt and trim. Cast aluminumconstruction allows for full, positive contactbetween engine bracket and transom.2-1/4"W, 11-1/4" LSold as pairs.ORDER NO. 205-20002Mfr. No. TW-2

TOPLOAD

For more information see:www.thmarine.com

ORDER NO. Mfr. No. A B C D

205-70001 RS-1-DP 5-1/2" 6" 10-1/4" 9"

205-70002 RS-2-DP 4-1/2" 5-3/4" 9-1/2" 10"

205-70003 RS-3-DP 4" 4-1/4" 7-1/2" 7"

205-70004 RS-4-DP 3-1/2" 6-1/2" 9-1/4" 10-1/2"

FOOT THROTTLE & ACCESSORIES

996

For more information see: www.trmarine.com

TRIM SWITCH MOUNTING BOLT KIT

Setback spacer must be used with 1989 and newer Merc./Mariner when mounted on EJ-50

Trim switch mounts onto steering wheel allowingdriver to keep both hands on steering wheel.

Order No. 098-00300Mfr. No. SP-300

SETBACK SPACER

098-00600 Order No. Mfr. No. Description098-00600 EJ-60 Setback Spacer 1/2" thick

For engine jack. Stainless steel. Packaged for your convenience.Saves time and ensures the correct bolts and nuts.

Kit Contains:4 each 1/2" N.C. x 3-1/2" Bolts4 each 1/2" N.C. x 2" Bolts8 each 1/2" N.C. x Nuts

Order No. 098-00023Mfr. No. EJ-23

JACK PLATE ACCESSORIES

@Have a Technical Question?

Contact our Technical Support Staffemail: erniesaxton@ccmarine.ca

derekh@ccmarine.ca

997For more information see: www.thmarine.com

Why your professional customers have got to have it.Ergonomics have finally come to marine controls. ProTrim takes the trimswitch off the control handle or off the wheel and puts it on the column,right at the driver’s fingertips.

Other boaters benefits: the U.V. stabilized ABS switch cover blends with thedash for a very attractive appearance, and Mylar labels lets the boatercustom label the switch functions.

Some of your customers will just want ProTrim to control their trim orjackplate. Part No. 101-10000 (PT1000P) is the perfect solution for them.Some will want ProTrim to control both trim and jackplate.For them, Part No. 101-20000 (PT2000T) Dual ProTrim isthe perfect choice.

Why you’ll love selling it.

Fast installation? Frankly, the ProTrim is really just a bolt-on for anexperienced technician, especially if the boat has a Teleflex SteeringSystem on board.

Just remove the wheel and install ProTrim on the steering bezel orhydraulic helm. ProTrim’s bracket fits most steering and adjusts forregular or deep dish wheels.

Wire the trim and/or jackplate to the switch (the heavy duty marinewiring harness is colour-coded to match existing trimand jackplate wiring.)Put the wheel back on and it’s done.

ORDER NO. Description101-10000 ProTrim Bezel Switch, Single101-20000 ProTrim Bezel Switch, Dual

PRO TRIM/JACK PLATE CONTROL

For more information see: www.teleflexmarine.com

This transom Trim Control provides a weatherproof tilt controlsystem at the stern area of the boat to facilitate placing motorsupport in position with one person. Switch can also be used forremote adjustment of hydraulic jackplates. The switch housing ismolded black plastic with raised white letters and may be mountedon any flat surface, comes with 18" pigtail wire and installationinstructions.

ORDER NO. 205-20001Mfr. No. TTC-1 Transom Trim Control

STEERING TRIM CONTROL UNIT

This Steering Trim Control Unit is molded of black plastic with raisedwhite letters to not only enhance boat appearance but also provide theultimate in control of any high performance boat. The Steering TrimControl Unit mounts easily to steering wheel spokes to place engine trimcontrol at your fingertips for maximum safety and ease of operation. Theweatherproof, rubber-booted, push-button switches combined with ablack urethane coiled cord provide a unit which will provide trim controlwithout removing hands from steering wheel.

ORDER NO. 205-11001Mfr. No. ST-1 Steering Trim Control Unit

TRANSOM TRIM CONTROL

TRIM/JACK PLATE CONTROLS

998

ORDER NO.Senior Description ORDER NO.

Junior

913-10000 StingRay™ Classic, Black 913-10001

913-20000 StingRay™ Classic, White 913-20001

913-30000 StingRay™ Classic, Grey 913-30001

888-90011 Replacement Hardware 888-90012

For more information see: www.stingrayhydrofoils.com

The StingRay™ Classic was developed over 20 years ago from the mostadvanced computer engineering of its time. This bolt-on hydrofoil hasproved extremely reliable and has become the number one selling marine

accessory of all-time! With a StingRay™ Classic installed, boats get up onplane 50% faster, while bow rise is also reduced.

Chinewalking, porpoising, and cavitation are no longer problems for boats witha StingRay™ Classic. For boaters wanting true stabilization, performanceenhancement, and increased fuel efficiency from their hydrofoil, a StingRay™Classic Hydrofoil will satisfy and surpass expectations!

StingRay™ Classic Junior recommended for engines under 40 HPStingRay™ Classic Senior recommended for engines 25-300 HP

With StingRay

Without StingRay

All boats react to propeller rotation causing a dangerous pullto one direction or the other. Fighting it can be very tiring

to the boat’s driver. StingRay™ provides the solution withTorque Equalizers.

StingRay™ Torque Equalizers, when placed on a StingRay™Classic Senior or Junior, will reduce or completely eliminatedangerous steering torque on all boats. With a StingRay™Hydrofoil Stabilizer and Torque Equalizers, boats track straight,are easier to control, safer to handle, and the driver’s armwon’t tire out after a day on the water.

By adjusting in 10° increments on the underside of the wings,Torque Equalizers provide superior leverage over auxiliarywedges or center mounted sacrificial anode torque tabs. Incomparison, other solutions don’t work nearly as well.

After one ride you’ll know why Torque Equalizers are thepremier solution for correcting bothersome steering torque.TORQUE EQUALIZER installs on the underneath side of the Sting Ray

Hydrofoil Stabilizer and is adjustable in 10° increments to achievemaximum effectiveness to solve your particular torque problems.

With Torque EqualizersWithout Torque Equalizers

Eliminates Chinewalking

ORDER NO. Mfr. No. Colour

888-00001 TE-XPI-1 Black

888-00002 TE-XPI-2 White

888-00003 TE-XPI-3 Grey

BENEFITS FROM EVERY STINGRAY™

• On plane in less time• Reduced bow rise• Eliminates Chinewalking• Stops porpoising• Wipes out cavitation• Saves fuel• Aids in pulling skiers

STINGRAY™ CLASSIC

TORQUE EQUALIZERS

HYDROFOIL STABILIZERS / TORQUE EQUALIZERS

999

The World’s Only Dual Angle of Attack Hydrofoil

The StingRay™ XRIII is the no-drill attachment pioneer in the hydrofoil industry. Along with providing all ofthe StingRay™ Classic performance benefits, the XRIII also provides the fastest hole shot in the industry!

The unique design of this hydrofoil harnesses the prop-wash and redirects it into a powerful, thrust-enhancing cone. The XRIII improves top speed and gives boats greater fuel efficiency too! The enhanced

styling of this hydrofoil projects a sporty and professional look for boaters wanting to improve performance without sacrificing value.

All of the StingRay™ Classic Benefits Plus these unique features:• NO-DRILL™ mounting design• Captive Prop-Wash resulting in fastest hole shot!• Increased thrust enhancement• Improved top speed• Greater fuel efficiency• Vision-3 enhanced styling

StingRay™ XRIII Junior recommended for engines 40-75 HPStingRay™ XRIII Senior recommended for engines 75-300 HP

For more information see: www.stingrayhydrofoils.com

The StingRay™ Stealth 2 is the world’s first and only dual angle of attack hydrofoil. Thisfeature alone allows boaters to experience optimal performance at all throttle ranges. At

lower speeds, the hydrofoil utilizes its inner angle, while at higher throttle ranges theStealth 2 uses its wing tips to maintain consistent, impressive performance improvement.The hidden, no-drill attachment results in no harm to the engine and a quicker installation process. Furthermore, an exclusively developedmaterial known as Fast-Finish lowers hydrodynamic drag dramatically.

The combination of the Stealth 2 s unique design, no-drill attachment, and Fast-Finish material results in the best top-end speed and fuelefficiency in the industry! For boaters looking to get on plane in half the time, reduce bow rise, eliminate chinewalking, stop porpoising andcavitation, while at the same time add true stabilization and increase fuel efficiency, the StingRay™ Stealth 2 is the product of choice!

All of the StingRay™ Classic benefits Plus these unique features:• World’s only dual angle of attack hydrofoil• Hidden no-drill attachment• Exclusive fast-finish material provides lowest hydrodynamic drag• Best top-end speed in the industry• Best fuel efficiency in the industry• Faster hole shot than competition• Two-toned, upgraded styling

StingRay™ Stealth recommended for engines 75-300 HP

STINGRAY™ XR-III

ORDER NO. Mfr. No. Description

913-90004 SC-XRIII-1 XRIII Speed Cap Covers, Black

913-90005 SC-XRIII-2 XRIII Speed Cap Covers, White

913-90006 SC-XRIII-3 XRIII Speed Cap Covers, Grey

ORDER NO.Senior Description ORDER NO.

Junior

913-11110 StingRay™ XR-III, Black 913-11111

913-21110 StingRay™ XR-III, White 913-21111

913-31110 StingRay™ XR-III, Grey 913-31111

STINGRAY™ STEALTH 2

ORDER NO. Mfr. No. Colour

913-00201 Stealth 2-1 Black

913-00202 Stealth 2-2 White

913-00203 Stealth 2-3 Grey

HYDROFOIL STABILIZERS

1000

• Fits all I/O’s and all outboards• Pops up skiers in less time• Smooths out ride in rough water• Cuts down on porpoising and cavitation• Stabilizes bow-light boats• Increases top speed and fuel savings in most applications• Water skiing’s most versatile accessory• Stainless steel attaching hardware furnished - installs in 15 minutes• Mounts on the anti-cavitation plate• Installation and operating instructions provided with each unit• Marine grade aluminium with durable anodized finish• Use the Whale Tail year around in all boating activities (salt and fresh water)

Little Brother to the Happy Troller®• Fits all outboard motors up to and including 25hp• Locks “down” for trolling, “up” for cruising• Made of highest quality polycarbonates with stainless steel hardware

Gull Wing Design Hydrofoil• Improves acceleration, ride and fuel economy• Keeps your boat on plane at slower speeds• Stainless steel mounting hardware included• Easy to install

For more information see: www.davisnet.com

Ordinary, flat hydrofoils ride on or below thesurface of the water, causingspeed robbing drag.

ORDER NO. Mfr. No.040-30000 448

ORDER NO. Mfr. No.040-04620 462

Lil’fella™

ORDER NO. Mfr. No.934-82200 440

Doel-Fin® is the original hydrofoil developed by an aeronautical engineer to improve overallperformance on all boats with outboard motors or outdrive units. Molded in 2 pieces of guaranteedunbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. Thepositive effects include greater stability, consistent planing at lower RPM, faster out-of-the-holeperformance, steadier turns, higher top-end speeds and lower bow rise at all speeds.

• Doel-Fin® improves overall performance - even on boats with well designed hulls• Save up to 30% on fuel comsumption• Faster out-of-the-hole for happier water skiers• Maintain lower planing speeds without constant throttle adjustment

for wakeboarding, tubing or beginner skiers• Less bow rise for better visibility and increased safety• Simple 15-minute installation; hardware included

For more information see: www.attwoodmarine.com

ORDER NO. Mfr. No. Description109-94000* 9400-7 For Outboards and Stern Drives

50 HP and above109-94010** 9401-4 For Outboards under 50 HP

Once you’re on plane, most of theAttwood Hydro-Stabilizer is out of thewater. Drag is reduced resultingin higher speed.

* Will not fit Volvo Penta 280/290 outdrives and BMW drives however,it will fit Volvo Penta 270 outdrive** Will not fit Mariner 20 HP engines where the cavitational plate is too small for installation

TROLLING PLATE

DOEL-FIN® HYDROFOIL

HYDRO-STABILIZER

WHALE TAIL XL® ALUMINUM STABILIZER AND SKI BOAT FIN

HYDROFOIL STABILIZERS

1001

The EasyTroller plate flexes todivert the prop thrust downwards,preventing damage to the plate itself.

• Holds trolling speeds as low as 1 mph.• Fits outboard & I/O motors from 50 HP to 300 HP• Manufactured in the USA from marine grade anodized

aluminum and stainless steel

Under power, prop thrust can bend ordamage the typical trolling plate.

ORDER NO. Mfr. No. Description968-00161 016.1 Standard Model968-00162 016.2 Fins Model

For more information see: www.ironwoodpacific.com

For more information see: www.davisnet.com

• A most significant invention in the sport of troll fishing sincethe advent of the outboard motor!

• Large Troller: Fits I/O’s plus all outboard motors 50 HP and larger.• Small Troller: Fits outboard motors from 20 HP to 50 HP• Use year round in either salt or fresh water.• Locks in “up” position for cruising• Locks in “down” position for trolling.• Attaching hardware furnished - installs in 15 minutes• Mounts on the anti-cavitation plate.• Installation and operating instructions provided with each unit.• Made of highest quality stainless steel and marine aluminum

(no other materials used).

ORDER NO. Mfr. No. Description Fits040-10000 461 Small Troller Outboard motors from 20 HP to 50 HP040-20000 460 Large Troller I/O’s plus outboard motors 50 HP and larger040-00001 R460A Replacement Backplate (Large) Large Troller (040-20000)040-00002 R461A Replacement Backplate (Small) Small Troller (040-10000)040-14440 468 Happy Troller Parts Kit

HAPPY TROLLER REPLACEMENT PARTS

Standard Model Fins Model

Innovative hinge design prevents bending!

The EasyTroller’s patented hinge design prevents damage to the trolling plate under inadvertent acceleration. EasyTroller mountsdirectly to the cavitation plate and snaps down into place to slow the boat to an ideal trolling speed. If the boater inadvertentlyaccelerates before raising the trolling plate, this hinged plate will simply flex and deflect the thrust downward rather than bending.

Also available in a Fins Model with easy mount hydrofoil fins to help the boat plane more quickly and improve fuel efficiency. Made fromall marine grade anodized aluminum and stainless steel.

EASY TROLLER™ TROLLING PLATES

TROLLING PLATES

1002For more information see: www.masterlock.com

For more information see: cequentgroup.com

For more information see: www.marinetechproducts.com

Mfr. No. 75-8201ORDER NO. 947-58201

OUTBOARD MOTOR LOCKS

OUTBOARD MOTOR LOCK

• 2 Security keys - Cannot be duplicated• Anti-Drill protection - High Security

• Fits up to 1/2” (12mm) engine bolts• Noise dampeners that reduce rattle

Mfr. No. 75-8101ORDER NO. 947-58101

HIGH SECURITYBOLT-ON MOTOR LOCK

• 2 Security keys - Cannot be duplicated• Polished 316 Stainless Steel• Fits turnbuckle design• Anti-Drill protection•Noise dampeners that reduce rattle

Mfr. No. 75-8000ORDER NO. 947-58000

PANTHER OUTBOARD MOTOR LOCKHeavy duty steel tubing. The vinyl-clad steel tube slides easily over the motor lock downsand is secured with a hardened brass pad lock. The padlock is recessed to deter cutting.Comes with 2 keys.• Heavy carbon steel design• Fits turnbuckle mounted engines•Recessed solid brass lock•Noise dampeners that reduce rattle

MARINE OUTBOARD MOTOR LOCKMounts Over Outboard Mounting Clamp Handles• Heavy-duty barrel key lock mechanism for maximum security• Foam filler insert reduces noise and vibration• Mounts on MOST outboard motors

ORDER NO. 125-01270

AttractiveAppearance

Installsin Seconds

OUTBOARD MOTOR LOCK• Brass construction offers maximum corrosion resistance.• Hardened steel tube prevents access to remove outboard motors• Laminated brass lock body with marine brass shackle for superior strength• Vinyl coating for maximum corrosion resistance. 4-pin cylinder for added pick resistance• Locks outboard motors up to 40 HP.ORDER NO. Masterlock No. Description104-43000 430DSPT Keyed Different; Outboard Motor Lock104-43001 430KA Keyed Alike; Outboard Motor Lock

OUTBOARD MOTOR LOCKS

1003

For more information see: www.sea-dog.com

For more information see: www.garelick.com

OUTBOARD MOTOR TILTER

OUTBOARD MOTOR SAFETY CABLEVinyl Coated Galvanized Steel Wire• Comes complete with snap hook

• Leverage tool for use with manual lift motors• Tilts motors back easily with less strain• Adjustable to fit shroud of outboards with hand holds• Compact for stowage• All contact points are cushioned

ORDER NO. 459-71036

Specifications:304 stainless steel and anodized aluminum tube with aluminumcastings, riveted assembly. Handles motor to 40 h.p.

ORDER NO. Mfr. No. A B C423-71599 371599-1 4'-2" 11/16" 3/16"

HEAVY DUTY MOTOR SAFETY CABLE• Secures motor to motor bracket or boat• Black poly vinyl cover

Specifications:2000 lb. tensile strength, stainless steel carbine style snap hook, 48"(122cm) length.ORDER NO. 459-71030

MOTOR TILTER & SAFETY CABLES

1004

STERN DRIVE PROPELLER LOCKSORDER NO. Mfr. No. Thread Application716-74039 74039 3/4-16 MerCruiser® Alpha I, Bravo I (Incl. X & XR), TRS, Vazer

OMC Cobra and King Cobra716-74040 74040 M18x1.5 All Yamaha716-74053 74053 1-14 MerCruiser® Bravo III (up to 2003), Blackhawk716-74057 74057 M22x2.0 Volvo DP-S (Duo-Prop)716-74058 74058 1-14 MerCruiser® III SSM, IV SSM, V SSM, VI SSM, NXT

OUTBOARD MOTOR PROPELLER LOCKSORDER NO. Mfr. No. Thread Application716-74039 74039 3/4-16 Mercury/Mariner 70 HP and larger (ex. 225 HP 4 stroke before 2005)

Mercury Bigfoot 40HP, 50HP, 60HP (4 stroke),Optimax 75HP and largerJohnson/Evinrude 150 HP and larger (2 stroke)

716-74040 74040 M18x1.5 Honda 75 HP and largerSuzuki 40 HP and largerYamaha 115 HP and largerJohnson/Evinrude 150 HP and larger (4 stroke)

716-74052 74052 5/8-11 Johnson/Evinrude 40-140 HP (2 stroke)(Some 90 HP & 130 HP may have a 3/4-16 shaft)

716-74056 74056 M16x1.5 Nissan 40 HP and LargerTohatsu 40 HP and LargerHonda 40-50 HP

For more informationsee:www.mcgard.com

Theft protection for your stern drive, simply replace one of the stern drive mounting nuts orVolvo bolts with a McGard lock. Made of high quality stainless steel, through-hardened.Features free spinning collar that turns if attacked by gripping tools, without loosening the lock.

ORDER NO. Mfr. No. Thread Application716-74018 74018 7/16-20 MerCruiser® Alpha, Bravo I-III (Incl. X & XR),(Single Drive) Blackhawk OMC Cobra & King Cobra

Volvo SX, DP-S716-74019* 74019 7/16-20 MerCruiser® Alpha, Bravo I-III (Incl. X & XR),(Twin Drive) Blackhawk OMC Cobra & King Cobra

Volvo SX, DP-S*Twin Drive sets include 2 locks and 1 key.

Propeller LocksTheft protection during use, storage and intransit. Features a free spinning collar, thatwill turn if attacked by gripping tools,without loosening the lock. Constructed ofnaval brass and hardened stainless steelfor maximum protection.

ORDER NO. Mfr. No. Thread Application716-74036 74036 1/2-20 Mercury/Mariner 40 HP and larger (2 stroke)

Mercury 25 HP and larger (4 stroke)Suzuki 150 - 300 HP

716-74037 74037 M12x1.25 Yamaha 40 HP and larger (2 stroke)Yamaha 30 HP and larger (4 stroke)Honda 40 HP and largerSuzuki 25 - 140 HP (2005 and newer)

716-74038 74038 1/2-13 Johnson/Evinrude 40 HP and larger (2 stroke)716-74049 74049 5/16-18 *Fits most of the following outboards:

• Honda 8-30 HP• Johnson/Evinrude 6-30 HP• Mercury/Mariner 8-25 HP• Nissan 8-18 HP• Suzuki 8-30 HP• Tohatsu 8-18 HP• Yamaha 8-25 HP (Lock may fit some 2 strokes up to 30 HP,verify hole diameter)

*Will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor(stainless steel bolt included in set).

716-74054 74054 M12x1.75 • Nissan 25 HP and larger• Suzuki 25 - 140 HP (2004 and earlier)• Tohatsu 25 HP and larger• Johnson/Evinrude 40 HP and larger (4 stroke)

Point of Purchase DisplayHelp your customers find McGard products quickly.Free display comes packed with 10 of #716-74018Stern drive locks. Assembles in seconds.

ORDER NO. 716-74027- Display with stock

OUTBOARD MOTOR LOCKS

PROPELLER LOCKS

STERN DRIVE LOCKS

LOCKS - STERN DRIVE, OUTBOARD & PROPELLER

1005

For more information see: www.qlmarine.com

SOUND ABSORBENT PANELS

SOUND ABSORBENT PANELS SELF-ADHESIVEQL sound absorbent panels effectively muffle engine noise. The insulation panels have adensity of 100 kg/m3, which is just the right weight to absorb marine engine noisefrequencies and noise levels.QL sound absorbent panels meet the fire safety requirements for CE marking.The insulation material is protected by an oil-resistant film that is easy to clean. The foamplastic is impregnated to make it self-extinguishing, and to withstand a max. temperatureof 200˚C (390˚F)It is important to fit the panels tightly together, using adhesive tape to sealthe joints to prevent noise leakage, or penetration of water, which could be absorbed bythe material. The insulation is sold in rectangular panels: 20" x 40" (500 x 1000 mm),which are easy to transport and to apply.

ORDER NO. Mfr. No. Description Width x Height x Thickness411-03803-9 41103803 9-Panel/Case 20" x 40" x 3/4" (20 mm)411-03804-6 41103804 6-Panel/Case 20" x 40" x 1-1/5" (30 mm)

ACCESSORIESNoise Reduction Tape (Self-Adhesive)411-03806 41103806 Foil Tape, 16.4' (5 m.) / roll411-03807 41103809 Foil Tape, 164' (50 m.) / roll

Insulation Fastener411-03810 41103810 Insulation Fastener, 10/Pk.

SOUND ABSORBENT PANELS

@Have a Technical Question?

Contact our Technical Support Staffemail: erniesaxton@ccmarine.ca

derekh@ccmarine.ca

1006

THE INSIDE STORY

As fuel enters, it moves past the internal check valve then through the turbine centrifugewhere it flows in a spiraling direction, spinning off large particulates and water droplets.Being heavier than fuel, they fall to the bottom of the

collection bowl.Smaller water droplets bead-up along and on the sides of theinternal components and on the surface of the Aquabloc®element. When heavy enough, they too fall into the high-capacity bowl to be drained as needed.Besides repelling water and tiny solids, asphaltenes, algae andrust are filtered from fuel by the Aquabloc® element.Because Aquabloc® elements are waterproof, they remaineffective longer.• T- handle for easy element service• Rugged, die-cast aluminium construction• Sheilded, see-thru bowls

For more information see:www.parker.com/racor

MARINE APPLICATIONS

AQUABLOC® ELEMENTSBesides removing asphaltenes, water, gums, and varnishes, Aquabloc® elements filter tiny particles of dirt and algae from fuel. Aquabloc®elements are rustproof - with polymer end-caps that won’t ever corrode. With an Aquabloc® replacement element, you get a complete kit with allthe seals you need. And not just any seals, but specially-formulated, Racor-engineered seals.• End caps are colour-coded: - Brown for 2 micron secondary - Blue for 10 micron primary/secondary - Red for 30 micron primary• Handles for easy servicing. • Racor Filter elements include an emergency bypass.

500 MA 900 MA 1000 MA 75500 MAX 500FG

Application Mfr. No. Micron Rating ORDER NO. Marine Rating

200 FG

2000PM-OR 30 Micron 209-2000PMOR No

2000SM-OR 2 Micron 209-2000SMOR No

2000TM-OR 10 Micron 209-2000TMOR No

500 MA, FG & FHand75500 MAX

2010PM-OR 30 Micron 209-2010PMOR Yes

2010SM-OR 2 Micron 209-2010SMOR Yes

2010TM-OR 10 Micron 209-2010TMOR Yes

1000 MA, FG & FHand751000 MAX

2020PM-OR 30 Micron 209-2020PMOR Yes

2020SM-OR 2 Micron 209-2020SMOR Yes

2020TM-OR 10 Micron 209-2020TMOR Yes

900 MA , FG & FHand75900 MAX

2040PM-OR 30 Micron 209-2040PMOR Yes

2040SM-OR 2 Micron 209-2040SMOR Yes

2040TM-OR 10 Micron 209-2040TMOR Yes

REPLACEMENT ELEMENTS

FILTER ASSEMBLIES

NON-MARINE

DIESEL TURBINE SERIES

Model 500 MA 900 MA 1000 MA 75500 MAX 500FGMaximum 60 gph 90 gph 180 gph 60/120 gph 60 gphFlow Rate 227 lph 341 lph 681 lph 227/454 lph 227 lphHeight 11.5" / 292 mm 17" / 432 mm 22" / 559 mm 11.5" / 292 mm 11.5" / 292 mmWidth 5.8" / 147 mm 6" / 152 mm 6" / 152 mm 14.5" / 368 mm 5.8" / 147 mmDepth 4.8" / 122 mm 7 " / 178 mm 7" / 178 mm 9.5 " / 241 mm 4.8" / 122 mmWeight 4 lbs / 2 Kg 6 lbs / 3 Kg 10 lbs / 5 Kg 17 lbs / 7.7 Kg 4 lbs / 1.7 KgPort Size Std. 3/4" - 16 UNF 7/8" - 14 UNF 7/8" - 14 UNF 3/4 - 16 UNF 3/4 - 16 UNFClean Pressure 0.3 psi 0.34 psi 0.49 psi 0.70 psi 0.25 psiDrop 1.7 kPa 2.4 kPa 3.4 kPa 4.83 kPa 1.72 kPaMaximum 15 psi 15 psi 15 psi 15 psi 15 psiOperating Pres. 103 kPa 103 kPa 103 kPa 103 kPa 103 kPaElement # 2010 2040 2020 2010 2010ElementRmvl. Clearance 4" / 102 mm 5" / 127 mm 10" / 254 mm 4" / 102 mm 4" / 102 mm

ORDER NO. 209-500MA10 209-900MA10 209-1000MA10 209-75500-10 209-500FG10

FUEL FILTERS

1007

AQUABLOC® ELEMENTSRACOR AQUABLOC® ELEMENTS Are available in 2-, 10-, and 30- micron ratings.Red = 30-micron, primary, good. Blue = 10-micron, primary, better. Brown = 2-micron, primary or secondary, best.

Application Mfr. No. Micron Rating ORDER NO. Marine Rating

110A R11T 10 Micron 209-00011T Yes

120A R12T 10 Micron 209-00012T No

120A R12S 2 Micron 209-00012S No

120RMAM R12S UL 2 Micron 209-00012S-UL Yes

215R R15T 10 Micron 209-00015T No

215RMAM R15T UL 10 Micron 209-00015T-UL Yes

215R R15S 2 Micron 209-00015S No

230R R20S 2 Micron 209-00020S No

230R R20T 10 Micron 209-00020T No

220R R24T 10 Micron 209-00024T No

220R R24S 2 Micron 209-00024S No

245R R25T 10 Micron 209-00025T No

245R R25S 2 Micron 209-00025S No

225R R26T 10 Micron 209-00026T No

225R R26S 2 Micron 209-00026S No

445R R45T 10 Micron 209-00045T No

460R R60T 10 Micron 209-00060T No

460R R60S 2 Micron 209-00060S No

490R R90T 10 Micron 209-00090T No

490, 790, 4120MAM S3201T UL 10 Micron 209-03201T-UL Yes

490, 790, 4120MAM S3201P UL 30 Micron 209-03201P-UL Yes

REPLACEMENT ELEMENTS

For more information see: www.parker.com/racor

COMPACT AND VERSATILE FILTRATION SYSTEMS FOR PROPULSION & GENSET APPLICATIONSMetal bowls are reusable, impact resistant and virtually indestructable. Only the filter element is replaced.Bowls will not deteriorate from water collection, alcohol, blended fuels, exposure to harsh additives, salt spray or UV light.UL listed filters meet ABYC, ASTM, ISO and many other global standards for filters used in marine engine rooms.

DIESEL SPIN-ON SERIES

FILTER ASSEMBLIES

MARINE APPLICATIONS NON-MARINE

Need Image

Model 110 A 120 RMAM 230 RMAM 120 AS 230 R10Maximum 15 gph / 57 lph (diesel) 15 gph 30 gph 15 gph 30 gphFlow Rate 35 gph / 133 lph (gas) 57 lph 114 lph 57 lph 114 lphHeight 6 " / 152 mm 5.7" / 145 mm 9" / 229 mm 6.5" / 166 mm 9" / 229 mmWidth 3.2" / 81 mm 3.2" / 81 mm 4" / 102 mm 3.2" / 81 mm 4" / 102 mmDepth 3.2" / 81 mm 3.2" / 81 mm 4" / 102 mm 3.2" / 81 mm 4" / 102 mmWeight 1.3 lbs / 0.59 Kg 1.4 lbs / 0.63 Kg 2 lbs / 0.90 Kg 1.1 lbs / 0.50 Kg 2 lbs / 0.90 KgPort Size 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPTClean Pressure 0.15 psi 0.15 psi 0.31 psi 0.15 psi 0.31 psiDrop 1.08 kPa 1.08 kPa 2.14 kPa 1.08 kPa 2.14 kPaMaximum 100 psi 7 psi 30 psi 7 psi 30 psiOperating Pressure 690 kPa 48 kPa 207 kPa 48 kPa 207 kPaElement # R11T R12SUL R20TUL R12 R20Integral Primer Pump No No Yes No YesORDER NO. 209-00110A 209-120RMAM 209-0230RMAM 209-00120AS 209-0230R10

FUEL FILTERS

1008

120R-RAC-01 320R-RAC-01 660R-RAC-01 120R-RAC-02 320R-RAC-02 660R-RAC-02

For more information see:www.parker.com/racor

• Corrosion-resistant construction.• Metal bowl units for inboard powered boats meet 33 CFRand USCG regulations.

• Meets ABYC standard for gasoline-powered vessels• New 2 micron option

THE MOST COMPLETE PROTECTION ON THE WATERBeing on the water is fun, having water in your fuel is not. And more than ever today's high-performance gasoline inboard and outboardengines require clean, dry fuel. Racor filters offer the improved features and peace-of-mind that come with our quality fuel filter/waterseparators.• Clear contaminant collection bowl with drain valvefor outboards only

• 10 micron Aquabloc media.• High capacity and long life.• Rated 98% efficient at 10 micron per SAE test procedures.

Application Mfr. No. Micron Rating ORDER NO.120R-RAC-01 S3240 10 Micron 209-03240120R-RAC-02 S3240TUL 10 Micron 209-03240T-UL320R-RAC-01490R-RAC-01 S3227 10 Micron 209-03227

320R-RAC-02 S3228TUL 10 Micron 209-03228T-UL

320R-RAC-0320R-RAC-02490R-RAC-01

S3228SUL 2 Micron 209-03228S-UL

660R-RAC-01 S3232 10 Micron 209-03232660R-RAC-023120R-RAC-32 S3232TUL 10 Micron 209-03232T-UL

REPLACEMENT ELEMENTS

FILTER ASSEMBLIES

OUTBOARD SERIES INBOARD SERIESModel 120R-RAC-01 320R-RAC-01 660R-RAC-01 120R-RAC-02 320R-RAC-02 660R-RAC-02Maximum 30 gph 60 gph 90 gph 30 gph 60 gph 90 gphFlow Rate 113 lph 227 lph 340 lph 113 lph 227 lph 340 lphFilter (10 micron) S3240 S3227 S3232 S3240TUL S3228TUL S3232TULOpt. (2 micron) N/A S3228SUL N/A N/A S3228SUL N/ACentre Threads M18 x 1.5 1" - 14 1" - 14 M18 x 1.5 1" - 14 1" - 14Port Size 1/4" - 18 NPTF 1/4" - 18 NPTF 3/8" - 18 NPTF 1/4" - 18 NPTF 1/4" - 18 NPTF 3/8" - 18 NPTFHeight 6.5" / 16.5 cm 9.4" / 23.9 cm 11.0" / 27.9 cm 6.0" / 15.2 cm 9.4" / 23.9 cm 10.5" / 26.7 cmWidth 3.2" / 8.1 cm 4.0" / 10.2 cm 4.2" / 10.7 cm 3.2" / 8.1 cm 4.0" / 10.2 cm 4.2" / 10.7 cmDepth 3.2" / 8.1 cm 4.0" / 10.2 cm 4.5" / 11.4 cm 3.2" / 8.1 cm 4.0" / 10.2 cm 4.5" / 11.4 cmWeight 1.1 lbs / 0.5 Kg 2.0 lbs / 0.9 Kg 3.0 lbs / 1.4 Kg 1.2 lbs / 0.5 Kg 2.0 lbs / 0.9 Kg 3.0 lbs / 1.4 Kg

Clean PressureDrop

0.6 psi0.04 bar

0.6 psi0.04 bar

0.6 psi0.04 bar

0.6 psi0.04 bar

0.6 psi0.04 bar

0.6 psi0.04 bar

MaximumOperating Pres.

7.0 psi0.5 bar

7.0 psi0.5 bar

7.0 psi0.5 bar

7.0 psi0.5 bar

7.0 psi0.5 bar

7.0 psi0.5 bar

Service Clearance(under bowl)

1.0"2.5 cm

1.0"2.5 cm

1.0"2.5 cm

1.0"2.5 cm

1.0"2.5 cm

1.0"2.5 cm

Ambient Temp.Range -40º to +225ºF(-40º to +124ºC)

Max. Fuel Temperature 190ºF (88ºC)

ORDER NO. 209-120RAC01 209-320RAC01 209-660RAC01 209-120RAC02 209-320RAC02 209-660RAC02

GASOLINE SPIN-ON SERIES

FUEL FILTERS

1009

OEM REPLACEMENT GASOLINE FILTERS - OUTBOARD ENGINE VESSELS

The ParFit PFF5510 gasoline fuel filter/water separator filter replaces standard filters in many inboard,outboard, two and four cycle engine applications.Fits Mercury, Mercruiser, Yamaha, Suzuki, Honda, Tohatsu and other applications using 11/16"-16 threads.Dimensions are 3.6" dia. x 4-1/4" tall.

Features & Benefits:• High containment capacity and 96% at 10 micron particle removalefficiency makes this filter suitable for all low or high pressure injection systems

• 99% efficient water removing filter media• Performance exceeds OEM specifications.

Mfr. No. PFF5510ORDER NO. 209-55100

GASOLINE SPIN-ON SERIES

OEM REPLACEMENT FUEL SEPARATOR FILTERS

Upgrade Your Standard Gasoline Filter with these Convenient Spin-Ons

Now, owners of inboard or outboard engines can get smoother operation and longer life - all in one easy spin onto their existing engine filterheads. There's a choice of rugged, reusable see-thru bowl with self-venting drain or a metal bowl with drain plug for inboard applications.Metal bowls are UL-listed and USCG accepted. See-thru bowls are for outboard applications only.

OEM REPLACEMENT GASOLINE FILTERS - INBOARD ENGINE VESSELS

APPLICATION Mfr. No. ORDER NO.

Replaces Quicksilver. Also fits:Yamaha, Suzuki, SMI, Volvo Penta,Sierra, AquaPower and other filter heads.With see-thru bowl. B32013 209-32013

Replacement Element for B32013 S3213 209-03213

Replaces OMC. See-thru bowl. B32014 209-32014

Replacement Element for B32014 S3214 209-03214

APPLICATION Mfr. No. ORDER NO.

Replaces Quicksilver. Also fits:SMI, Sierra AquaPower and otherfilter heads. Metal bowl. B32020MAM 209-32020MAM

Replacement Element for B32020MAM. S3220TUL 209-03220T-UL

Replaces OMC Metal Bowl. UL recognized. B32021MAM 209-32021MAM

Replacement Element for B32021MAM. S3221TUL 209-03221T-UL

FUEL FILTERS

For more information see: www.parker.com/racor

1010

FUEL FILTERS -MISCELLANEOUS APPLICATIONS

For more information see: www.parker.com/racor

The Racor Fuel Filter Funnel (RFF) family is a heavy-duty, fast-flow, filter-in-a-funnel that separates damaging free water and contaminantsfrom gasoline, diesel, heating oil, and kerosene.The RFF family of products is capable of removing free water and solids down to .0005 inchesand allows you to visually inspect the integrity of your fuel supply as you refuel.The RFF family is manufactured using industrial-grade black electro-conductive polypropylene. Carbon powder is injected into the plastic sothat the RFF will conduct static electricity. The grounding capability of the RFF is an important safety feature. Always use proper fuel handlingprocedures and follow local, state and federal regulations.

• Inlet snubbed, 1/4" NPTF thread• Silicone dampen movement• Black restriction pointer• Red tell-tale restriction pointer• Vacuum (suction) only• 0-30" hg

Mfr. No. RK11-1676 EORDER NO. 209-111676E

• Gauge kit for panel intallation• All liquid filled out 2" dial• 0-30" hg• 1/4" NPT back bracket mount• Includes fittings to #4 hose (1/4")• Vacuum (suction) or pressure

Mfr. No. 1606BORDER NO. 209-01606B

• Gauge kit for ‘T Handle’ installation• Includes Gauge 11-1676 and lidfitting 11-1668

• Fits Turbine series 500MA, 900MAand 1000MA

• Vacuum(suction) or Pressure

Mfr. No. RK11-1669ORDER NO. 209-111669

FUEL FILTER FUNNEL

A handy accessory for bowl removalon all Spin-on series filters

Mfr. No. RK22628ORDER NO. 209-22628

• For Diesel Turbine Series Filters• Brass shut-off valve

Mfr. No. RK19492ORDER NO. 209-19492

DIESEL BIOCIDERacor Diesel Biocide is amultifunctional petroleum distillatefuel additive. It is used to helpmaintain color stability and clarity;control bacteria; fungi; organicreaction and sludge formation; inhibitcorrosion; and disperse existentsludge.Mfr. No. ADT 2116ORDER NO. 209-02116

Installed in the fuel tank vent line, the Racor Lifeguard Fuel/Air Separator efficiently separates air from fuel forced into the line. Air isvented, and all fuel is returned to the tank. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansionup to 2.4 psi. It also eliminates damage to expensive striping and labels and protects finishes from fuel stains.

The unit is also maintenance free - there's nothing to rust or corrode.The Racor Fuel/Air Separator fits neatly into your vent line, actually replacing a section of the line. Fittings are included.One fuel/air separator unit is required for each vent line, and both models fit 5/8" vent lines.

PRE-FILTRATION FUEL FILTER FUNNELS

VENT LINE VALVES

VACUUM GAUGES

UL LISTED DRAIN VALVE FILTER WRENCH DIESEL ADDITIVE

Mfr. No. ORDER NO. Flow RateRFF1C 209-99901 2.7 gpmRFF3C 209-99903 3.9 gpmRFF8C 209-99908 5.0 gpmRFF15C 209-99915 15.0 gpm

LG50 LG100

Application Gasoline Diesel/GasolineDimensions 1 3/4"D x 6"L 4"D x 9 3/4"LMax Air Flow 12cfm / 5.6 lps 17 cfm / 8lpsThermal Expansion Up to 2.4 psi Up to 2.4 psiVent Line Size 5/8" 5/8"ORDER NO. 209-00050 209-00100