ccna 1 final

CCNA Answers – CCNA Exam – CCNA Exams CCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers, CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3 Answers, CCNA 4 Answers, CCNA v4 Answers

� Home � About � Contact � VLSM Calculator

CCNA 1 Final Exam Answers 2011

Posted in CCNA 1 - Network Fundamentals (V4.0) - 9 February 2011 - 23 comments - 41,783 views

1. Due to a security violation, the router passwords must be changed. What information can be learned from the following configuration entries? (Choose two.) Router(config)# line vty 0 3 Router(config-line)# password c13c0 Router(config-line)# login

The entries specify three Telnet lines for remote access.

The entries specify four Telnet lines for remote access.

The entries set the console and Telnet password to "c13c0".

Telnet access will be denied because the Telnet configuration is incomplete.

Access will be permitted for Telnet using "c13c0" as the password.

2. Which two actions could be taken by a router if a specific match is not made to a route in the routing table? (Choose two.)

The packet will be discarded.

The packet will be sent back to the source.

The packet will be flooded out all interfaces.

Ads by Google CCNA Exploration Cisco CCNA Cert Cisco Exam CCNA Training

Ads by Google CCNA Test Exam CCNA Answers CCNA Salary CCNA Courses

Ads by Google CCNA Practice CCNA Classes CCNA Questions CCNA Skills

of 30CCNA 1 Final Exam Answers 2011 | CCNA Answers - CCNA Exam - CCNA Exams

14.04.2011http://ccnaanswers.com/ccna-1-final-exam-answers-2011/

Neighboring routers are polled to find the best path.

The packet will be forwarded to a default route if one is present.

3.

Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using a secure connection. Which statement is true about this connection?

The Telnet server process is running on PC1.

Only the exchange of the Telnet username and password is encrypted.

The GET request is sent to RouterA to retrieve data.

The SSH service is used to connect PC1 to RouterB.

4.



Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choose three.)

The prefix of the subnet mask is /26.

The network on which this computer resides can have 30 hosts.

The computer is unable to communicate outside of the local network.

The address that is assigned to the computer represents private addressing.

The IP address that is assigned to the computer is routable on the Internet.

The IP address that is assigned as the default gateway is valid for this host.

5. What information can be gathered by using the command netstat?

the default gateway

the routing protocol

active TCP connections

the locally configured subnet mask

6.

Refer to the exhibit. The nslookup command that is shown was issued on a Windows PC host. What does the 10.32.5.74 address represent?

the IP address of the host

the default gateway for the host

the primary DNS server for the host

the home page address for the host



7.

Refer to the exhibit. A network administrator remotely accesses the CLI of RouterB from PC1 using Telnet. Which statement is true about this connection?

The data is automatically encrypted.

A Telnet server process is running on PC1.

The connection is made through a VTY session on the router.

A GET request was sent to RouterB to retrieve data during this session.

8. Which three addresses are private IP addresses? (Choose three.)

10.0.0.1

46.1.1.88

172.31.31.10

172.32.16.10

192.168.8.8

9.

Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the organization. What is the likely cause of the problem?



Hosts A and B are not on the same subnet as host C.

The IP addresses on the router serial interfaces are wrong.

The subnet mask on host C is improperly configured.

The FastEthernet interface fa0/0 of router 1 is wrongly configured.

10. Which OSI layer addressing is required to route packets between two networks?

Layer 1

Layer 2

Layer 3

Layer 4

11. What is the effect of using the Router# copy running-config startup-config command on a router?

The contents of ROM will change.

The contents of RAM will change.

The contents of NVRAM will change.

The contents of flash will change.

12. A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?

Use the ipconfig /all command at the host’s command prompt.

Use the ping 127.0.0.1 command at the command prompt.

Use the traceroute command at the command prompt to identify any failures on the path to the gateway.

Use FTP to check for connectivity to remote sites.

Download a troubleshooting tool from the PC manufacturer’s website.

13. Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0?

255.255.0.0

255.255.254.0

255.255.252.0

255.255.248.0



255.255.240.0

255.255.255.128

14.

Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame?

only computer D

only computer A and computer D

only computer B, computer C, and computer D

all computers

15.

Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which two statements are true about this setup? (Choose two.)

The cable is suitable for connecting a switch to a router Ethernet port.

The cable is suitable for connecting dissimilar types of devices.

The cable is unusable and must be rewired.



The cable is terminated in a way that the transmit pin is wired to the receive pin.

The cable simulates a point-to-point WAN link.

16.

Refer to the exhibit. Which layered network model is shown in the diagram?

Cisco

IETF

OSI

TCP/IP

17. An administrator makes changes to the default configuration of a router and saves them to NVRAM. After testing, it is discovered that the configurations did not have the desired effect and must be removed. What steps must be taken to remove the changes and return the router to the default configuration?

Reboot the router.

Use no version of the commands that are issued.

Issue the erase startup-config command, and then reboot the router.

Issue the erase running-config command, and then reboot the router.

18.



Refer to the exhibit. Host A and B are unable to communicate with each other. What is the reason for this?

Host A is assigned a network address.

Host B is assigned a multicast address.

Host A and host B belong to different networks.

The gateway addresses are network addresses.

19.

Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. The modified configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configuration on a TFTP server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?



20. What can the user do from the command prompt, Router(config-line)# ?

Configure one of the network interfaces.

Configure one of the physical or virtual lines.

Verify the running configuration on the device.

Configure the parameters for one of the routing protocols.

21.

Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gateway?

Use the ping 127.0.0.1 command.

Use the ipconfig command.

Use the ipconfig/all command.



Use the ping 10.0.0.254 command.

22.

Refer to the exhibit. The serial interface of the router was configured with the use of the commands that are shown. The router cannot ping the router that is directly connected to interface serial 0/0/0. What should the network technician do to solve this problem?

Configure the description at interface serial 0/0/0.

Configure an IP address on interface serial 0/0/0.

Remove the no shutdown command at interface serial 0/0/0

Reboot the router.

23. A technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Which type of password would require this login and be considered the most secure?

console

enable

enable secret

VTY

24. What are two purposes for configuring a banner on a router? (Choose two.)

to announce system downtime

to prevent unauthorized access to the router

to provide a description of interface connections

to assist in legal prosecution for unauthorized access

to provide a welcome message to users who access the router

25.



Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three routers. Which action will help to identify the path between the hosts?

Use the ipconfig command at the host.

Use the ipconfig/all command at the destination.

Use the tracert command at the host.

Use the ping command at the destination.

26.

Refer to the exhibit. Which list refers only to end devices?

D,E,F,G

A,H,B,C

A,D,E,F

A,D,E,G

27. When must a router serial interface be configured with the clock rate command?



when the interface is functioning as a DTE device

when the interface timers have been cleared

when the connected DTE device is shut down

when the interface is functioning as a DCE device

28. Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?

29.

Refer to the exhibit. Which two layers of the OSI model describe the same functions as the transport and internet layers of the TCP/IP model? (Choose two.)

application layer



presentation layer

session layer

transport layer

network layer

data link layer

physical layer

30. What happens when a host station receives a frame that contains its own MAC address in the destination field?

The Layer 2 information is removed and the frame is pushed up to Layer 3.

The host station will copy the information to its buffers and send it back out.

The frame originated from the host and will be ignored.

The Layer 3 information is added to the frame.

31.

Refer to the exhibit. Host A is configured with the correct IP address for the default gateway of the router R1 FastEthernet0/1 interface. How will a packet that is sent from host A to host B be handled by the devices on the network?

R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.1.0/24 network.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will forward the packet to the directly connected network 10.1.1.0/24.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a default route to network 10.1.1.0/24.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a route that is learned by a routing protocol to network 10.1.1.0/24.



32. What type of network is maintained if a server takes no dedicated role in the network?

mainframe

client/server

peer-to-peer

centralized

33. In a network design project, a network designer needs to select a device to provide collision free connections to 40 hosts on the LAN. Which device should be selected?

hub

router

switch

firewall

34. Which TCP/IP model layer creates additional overhead on network resources due to acknowledgments, tracking, and retransmission of data?

internet

transport

application

network access

35. How many host addresses may be assigned when using the 128.107.0.0 network address with a subnet mask of 255.255.248.0?

30

256

2046

2048

4094

4096

36. Which service is used when the nslookup command is issued on a computer?

FTP



DNS

DHCP

Telnet

37. Which process provides the means to send and receive data when running multiple applications at the same time on a computer?

interleaving

sequencing

segmentation

acknowledgement

38. Which three IPv4 addresses represent valid host addresses for a subnet? (Choose three.)

10.1.12.79/28

10.1.12.113/28

10.1.12.32/28

10.1.11.5/27

10.1.11.97/27

10.1.11.128/27

39. What is the consequence of issuing the erase startup-config command in privileged EXEC mode on a Cisco router?

Data stored in RAM will be removed.

Data stored in NVRAM will be erased.

Information in flash memory will be removed.

Flags in the configuration register will be set to 0.

Both the startup-config and the running-config will be erased.

40.



Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?

IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2






41. What is the Cisco IOS?

system software for Cisco devices

Read Only Memory in Cisco devices

non-volatile storage for device configurations

an initial operating system that is used for boot functions

42. Which router configuration mode will require user authentication if an administrator issues the enable secret command?

user executive mode

privileged executive mode

global configuration mode

service specific configuration mode

43. Which command or commands will require authentication to access the privileged exec mode?

RTRA(config)# enable secret cisco RTRA(config)# service password encryption

RTRA(config)# line con 0 RTRA(config-line)# login



RTRA(config-line)# password cisco

RTRA(config)# line vty 0 4 RTRA(config-line)# login RTRA(config-line)# password cisco

44. A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate this error?

access point

host

hub

router

switch

45. Which statement is true about Layer 3 addresses?

They are physical addresses.

They are used in routing decisions.

They are only used on local networks.

They are altered each time a packet crosses a router.

46.

Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web server. Which client application will allow this request to be started?



47. Which OSI layer does IP rely on to determine whether packets have been lost and to request retransmission?

application

presentation

session

transport



48.

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?

10.0.0.254

192.168.0.249

192.168.0.250

10.0.1.254

49. An administrator is in the middle of entering a lengthy command when suddenly output from the IOS appears stating that an interface has gone down and then up again. Consequently, the command that the administrator was typing is no longer legible on the terminal. What CLI keystrokes can be entered to return to the line that the administrator was typing?

Ctrl-D

Ctrl-K

Ctrl-R

Ctrl-Z

50. Which option represents a point-to-point logical topology diagram?



51. Which physical component is used to access and perform the initial configuration on a new unconfigured router?



52. Which option shows how a router will route packets to a remote network?

Which process provides the means to send and receive data when running multiple applications at the same time on a computer?, How many host addresses may be assigned when using the 128 107 0 0 network address with a subnet mask of 255 255 248 0?, Refer to the exhibit An administrator on PC1 wants to view some HTML code from a web page housed on the web server Which client application will allow this request to be started?, Which transport layer process allows for multiple applications to send and receive data concurrently on a single computer?, ccna exploration final exam answers 2011, Which option represents a point-to-point logical topology diagram?, ccna 2011 exams, Due to a security violation the router passwords must be changed What information can be learned from the following configuration entries? (Choose two ), How many host addresses may be assigned when using the 128 107 0 0 network address with a subnet mask of 255 255 248 0, Refer to the exhibit Which diagram depicts the path through the network that is represented in the output of the tracert command?, Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?, ccna exams 2011, ccna enetwork final exam 2011, CCNA 2011 exam, How many host addresses may be assigned when using the 128 107 0 0 network address with a subnet mask of 255 255 248 0? 30 256 2046 2048 4094 4096, ccna 1 final exAM 2011 ANSWERS, ccna 1 network fundamentals final exam answers 2011, latest ccna exam 2011, ccna 1 exam answers 2011, Refer to the exhibit PC1 is unable to access PC2 To troubleshoot this problem the technician needs to confirm that the next hop interface is operational Which default gateway address should the technician ping from PC1 to confirm this?, Refer to the exhibit The nslookup command that is shown was issued on a Windows PC host What does the 10 32 5 74 address represent?, Which three addresses are private IP addresses? (Choose three ) 10 0 0 1 46 1 1 88 172 31 31 10 172 32 16 10 192 168 8 8, ccna final exam answer 2011, ccna1 final exam v4 0 2011, Cisco-CCNA1-Final-Answered-2011, what information can be



gathered by using the command netstat, An administrator on PC1 wants to view some HTML code from a web page housed on the web server Which client application will allow this request to be started?, ccna 1 final exam answers february 2011, Which service is used when the nslookup command is issued on a computer?, ccna 1 final exam march 2011, ccna 2011 answers, ccna1 finals, Refer to the exhibit A network administrator remotely accesses the CLI of RouterB from PC1 using Telnet Which statement is true about this connection?, Which command or commands will require authentication to access the privileged exec mode?, Which physical component is used to access and perform the initial configuration on a new unconfigured router?, antwoorden ccna1 2011, ccna 1 final exam answers march 2011, ccna exam schedule 2011, ccna exams and answers 2011, ccna final exams 2011, cisco 2011 final answers, In a network design project a network designer needs to select a device to provide collision free connections to 40 hosts on the LAN Which device should be selected?, Refer to the exhibit A PC is communicating with another PC on a remote network The two networks are connected by three routers Which action will help to identify the path between the hosts?, Which transport layer process allows for multiple applications to send and receive data concurrently on a single computer, 2011 ccna, ccna final exam 2011 answers, ccna latest exam 2011, cisco 1 final exam 2011, New ccna1 final exam answers 2011, ccna 1 answer 2011, ccna 1 final answer, Ccna1 answer com, ccna1 practice final exam 2011, cisco 2 final exam answers 2011, cisco exploration 1 2011 final exam answers, Cisco Exploration final exam answers, e network chapter final exam 2011 answers, examen final ccna1 2011, Refer to the exhibit An administrator on PC1 wants to view some HTML code from a web page housed on the web server Which client application will allow this request to be started, Which list refers only to end devices?, Which process provides the means to send and receive data when running multiple applications at the same time on a computer, Which table accurately associates the RFC 1918 private IP addresses with the correct network mask, ccna 1 2011 final exam answers, ccna 1 exam questions and answers 2011, ccna answer 2011, ccna answers final 2011, ccna exam questions and answers 2011, ccna final exam new 2011, ccna1 2011 final exam, ccna1 final eam 2011 answers, ccna1 final exam february 2011, ccna1 final exam v4 2011, ccnaanswer final exam 2011, enetwork final 2011, final ccna 1 2011, final exam ccna 1 answers 2011, What can the user do from the command prompt Router(config-line)# ? Configure one of the network interfaces Configure one of the physical or virtual lines Verify the running configuration on the device Configure the parameters for one of the routing proto, Which option represents a point-to-point logical topology diagram, An administrator is in the middle of entering a lengthy command when suddenly output from the IOS appears stating that an interface has gone down and then up again, ccna 1 2011 final, ccna 1 answer final 2011, ccna 1 final exam answers pdf, ccna 1 final exam answers v4 0 feb 2011, ccna 1 final exan answers 2011, CCNA 4 final ansvers march 2011, ccna changes 2011, ccna test answers 2011, ccna1 2011 final exam and answers, ccna1 v4 0 final exam answers for 2011, ccna1final exam 2011, cisco answers 4 2011 final, cisco ccna final exam answers 2011, cisco ccna1 final 2011, enetwork final exam answer, enetwork final exam cisco 2011, examen ccna 2011, final test ccna 1 2011, list refers only to end devices, Refer to the exhibit Which list refers only to end devices?, What can the user do from the command prompt Router(config-line)#

Tags: CCNA 1, CCNA 1 Final, CCNA 1 Final Exam V4.0 Answers 2011, CCNA 1 Practice Final Exam Answers, CCNA 2011, CCNA Answers 2011, CCNA Exam 2011, CCNA Final, CCNA Final 2011, Cisco CCNA 1 Final Exam Answers, Exam 2011, Final Exam, Network Fundamentals Final Exam Answers

23 Responses - Add Yours+

1. Simon says: February 20, 2011 at 6:35 pm

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?

10.0.0.254

192.168.0.249

192.168.0.250

10.0.1.254

Could you review this question I’m not sure its correct… I think the answer is the last option. Please reply urgently



Reply

� ladyme says: March 1, 2011 at 4:52 am

the 1st option is the ip add that is being assigned to the Fa0/0 of the router…

Reply

� usama says: March 1, 2011 at 12:19 pm

10.0.0.254

is right .. basic concept .. any pc with switch or not attach with router by interface . this interface is the gatway for pc ( users )

Reply

� Michelle says: March 14, 2011 at 2:36 am

The question is asking the default gateway of PC1, of course it’s 10.0.0.254. 10.0.1.254 is PC2′s default gateway

Reply

2. Newbie says: February 21, 2011 at 10:52 pm

MY TWO CENTS WORTH.. Q.3 Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using a secure connection. Which statement is true about this connection?

The SSH service is used to connect PC1 to RouterB. “Question askes for a SECURE connection, telnet is not secure.

Q.4 Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choose three.)

The network on which this computer resides can have 30 hosts. The computer is unable to communicate outside of the local network.”The gateway address is on a different subnet, this has a 224 mask networks hop in 32″ The address that is assigned to the computer represents private addressing

Q.8 Which three addresses are private IP addresses? (Choose three.) 10.0.0.1 172.31.31.10.”Read question Properly..Choose 3″ 192.168.8.8

Q.9 The subnet mask on host C is improperly configured. “Notice it has a /27, it should be /28. A and B are on the 172.16.31.96 – 172.16.31.111, C is on 172.16.31.80 – 172.16.31.95.

Q.28 Which table accurately associates the RFC 1918 private IP addresses with the correct network mask? 192.168.0.0 255.255.0.0 /16



172.16.0.0 255.240.0.0 /12 10.0.0.0 255.0.0.0 /8

Q.37 Which process provides the means to send and receive data when running multiple applications at the same time on a computer? Segmentation

Q.49

Ctrl-R Redisplays a line

Reply

3. jessie says: February 22, 2011 at 9:54 pm

43. Which command or commands will require authentication to access the privileged exec mode?


RTRA(config)# line con 0 RTRA(config-line)# login RTRA(config-line)# password cisco


Could you review this question I’m not sure its correct… I think the answer is the first option. Please reply urgently

Reply


authentication … so this will be in sesion like line vty


is right

Reply

� Jae says: March 3, 2011 at 8:19 am

The answer should be:


since the question is asking about privileged exec mode not telnet session.

Reply



� Vanessa says: March 9, 2011 at 1:55 am

I think so too. enable secret is for privilege-exec authentication

Reply

� emil says: April 7, 2011 at 8:20 pm

But “service password encryption” will not help you at all to authenticate. It will just encrypt passwords at show running config

Reply

4. jessie says: February 22, 2011 at 11:21 pm

9.

Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the organization. What is the likely cause of the problem?

Hosts A and B are not on the same subnet as host C.

The IP addresses on the router serial interfaces are wrong.


The FastEthernet interface fa0/0 of router 1 is wrongly configured.

Could you review this question I’m not sure its correct… I think the answer is the last option. Please reply urgently

Reply


Q9


is the right answer

Reply

� Satman says: April 12, 2011 at 7:49 am

Answer C is maybe expected, but it is not the right one!! The question is: Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the organization. What is the likely cause of the problem? … and it is not because of improper subnet mask. Even with the wrong mask you will be able to ping host A from host C!!

So IMHO, none of the answers are right!!!



Reply

� Satman says: April 13, 2011 at 8:06 am

Yes, I have tried it in packet tracer and the problem does not exist. You can ping hosts A and B regardless of subnet mask on host C.

So the question is stupid !!

Reply

5. Net says: February 23, 2011 at 8:31 pm

No it isnt were pinging to default gateway (its a next hop) from PC1 and thats 10.0.0.254.

Reply

� nix says: March 9, 2011 at 10:37 pm

i agree! 10.0.0.254 is the next hop.

Reply

6. usama says: March 1, 2011 at 1:38 pm

Q3

The connection is made through a VTY session on the router.

about ssh secure the content vty secure username and password ( connection )

Reply

� tyny says: March 12, 2011 at 10:22 pm

IF WE READ THIS “Choosing a SSH Client SSH (or Secure Shell) is a protocol that can be used to log into a remote machine (your Virtual Server) and provide secure encrypted communications between your Virtual Server and your local computer. All of the commands you would use in a Telnet client, you can use in an SSH client. The only difference is that the communication is made via encrypted channels to and from your Virtual Server. ” i think the answer is “The SSH service is used to connect PC1 to RouterB.

“

Reply

7. Tzvetan says: March 3, 2011 at 3:55 pm

What about Q2….? Is the answer “Neighboring routers are polled to find the best path.” right?



Reply

� tyny says: March 12, 2011 at 10:14 pm

Q2 I think the right answer is “The packet will be discarded” and “The packet will be forwarded to a default route if one is present”

Reply

� AMIR GOUDA says: March 26, 2011 at 5:12 am

yes,I’m with you (tyny). I think that they are the two right answers.

Reply

8. tyny says: March 12, 2011 at 10:40 pm

Q43 answer is “RTRA(config)# enable secret cisco RTRA(config)# service password encryption

” Q9 answer is “The subnet mask on host C is improperly configured” must be /28 like router2 fa 0/0

Reply

9. ashwin2011 says: March 13, 2011 at 12:00 pm

hey guys in Q3 The network administrator remotely accesses the CLI of RouterB from PC1 using a SECURE connection

we all know that telnet is not secure, is that answer right ?

should it not be d.

*The SSH service is used to connect PC1 to RouterB.

Reply

Leave a Reply

Name (required)

Mail (will not be published) (required)

Website



Categories

� CCNA 1 – Network Fundamentals (V4.0) (13) � CCNA 2 – Routing Protocols and Concepts (V4.0) (12) � CCNA 3 – LAN Switching and Wireless (V4.0) (8) � CCNA 4 – Accessing the WAN (V4.0) (9) � CCNA 1 – Networking Basics (V3.1) (13) � CCNA 2 – Router and Routing Basics (V3.1) (13) � CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10) � CCNA 4 – WAN Technologies (V3.1) (8)

Tags

CCNA 1 CCNA 1 Module 1 Answers 2010 CCNA 1 Module 2 Answers 2010 CCNA 1 Module 3 Answers 2010 CCNA 1 Module 6 Answers 2010

CCNA 1 Practice Final Exam Answers CCNA 2 CCNA 3 CCNA 3 Module 4 Answers 2010 CCNA 4 CCNA

Exploration 1 Chapter 1 Answers CCNA Exploration 1 Chapter 2 Answers CCNA Exploration 1 Chapter 3 Answers CCNA Exploration 1 Chapter 4 Answers CCNA

Exploration 1 Chapter 5 Answers CCNA Exploration 1 Chapter 6 Answers CCNA Exploration 3 Chapter 1 Answers CCNA Exploration 3 Chapter 2 Answers CCNA

Exploration 3 Chapter 3 Answers CCNA Exploration 3 Chapter 4 Answers CCNA Final CCNA Module 1 Answers CCNA Module 2 Answers CCNA Module 3 Answers CCNA Module 4 Answers CCNA Module 5 Answers CCNA Module 6 Answers CCNA Module 7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10 Answers CCNA Module 11 Answers Cisco CCNA 1 Final Exam Answers LAN

Switching and Wireless Chapter 1 Answers LAN Switching and Wireless Chapter 2 Answers LAN Switching and Wireless Chapter 3 Answers LAN Switching and

Wireless Chapter 4 Answers LAN Switching and Wireless Final Exam Answers Network Fundamentals Chapter 1 Answers Network Fundamentals

Chapter 2 Answers Network Fundamentals Chapter 3 Answers Network Fundamentals Chapter 4 Answers Network Fundamentals Chapter 5 Answers Network

Fundamentals Chapter 6 Answers Network Fundamentals Final Exam Answers Download CCNA PDF File

Most Views

� CCNA 1 Final Exam V4.0 Answers - 71,157 views � CCNA 3 Final Exam V4.0 Answers - 55,022 views � CCNA 4 Final Exam V4.0 Answers - 50,406 views � CCNA 1 Chapter 2 V4.0 Answers - 42,604 views � CCNA 1 Final Exam Answers 2011 - 41,783 views � CCNA 2 Chapter 1 V4.0 Answers - 40,317 views � CCNA 1 Chapter 3 V4.0 Answers - 37,691 views � CCNA 1 Chapter 11 V4.0 Answers - 37,455 views � CCNA 1 Chapter 5 V4.0 Answers - 34,668 views � CCNA 1 Chapter 4 V4.0 Answers - 32,089 views

Submit Comment

Search

Network Security Jobs

Top Paying IT Security Jobs High Tech

Recruiting Firm dwasearchinternational.com

V5.1/V5.2 Protocol stacks

Field-proven V5.1/V5.2.-BLES VoDSL

ATM AAL FR ISDN in source code www.Enea.com

samwin attendant console

New professional SIP console innovativ

and vendor independent. www.telecomsoftware.com



Popular Tags

ccna answers, Refer to the exhibit A network administrator needs to download a previously saved configuration file from the TFTP server to Switch1 Which command will accomplish this task?, ccnaanswers com, An administrator makes changes to the default configuration of a router and saves them to NVRAM After testing it is discovered that the configurations did not have the desired effect and must be removed What steps must be taken to remove the changes and r, Refer to the exhibit The broadcast traffic from PC1 is consuming bandwidth on the interswitch trunks What should be done to prevent this from happening?, Refer to the exhibit A network technician has made several changes to R1 since the configuration has last been saved The modified configuration did not produce the desired changes The technician wants to store a backup copy of the saved configuration on a, Refer to the exhibit Interface Fa0/0 on router A is generating excessive broadcast traffic Which LAN segments will affected by the excessive broadcasts?, Refer to the exhibit Which command should be issued to configure the address of the router interface that is attached to this computer?, A network administrator issued the erase nvram: command on a switch What will be the outcome of the command?, Refer to the exhibit After the commands are entered which password will be required to establish a Telnet session with the router?, ccnaanswers, A network administrator enters the enable command at the Switch> prompt of a new switch What mode will the switch enter?, ccna answer, ccna 1 final exam answers, Refer to the exhibit A technician uses the show ip route command to troubleshoot a network and receives the output that is shown What is indicated by the route that is labeled R*?, cisco answers, Refer to the exhibit Host A is able to access resources on the local LAN but is unable to access any resources on the Internet What is the likely cause of this problem?, ccna 1 chapter 2 answers, ccna 1 final exam answers 2011, Refer to the exhibit A ping test between PC1 and PC2 failed To troubleshoot the case a network administrator issued the ipconfig command on PC1 and the show ip interface brief command on R1 Based on the outputs provided what could be the possible cause of, ccna 4 final exam, ccna 1 chapter 6 answers, Refer to the exhibit A network administrator tries to test the connectivity between routers R1 and R2 but the attempt to ping is unsuccessful Based on the show ip interface brief command outputs what could be the possible cause of the problem?, ccna 2 chapter 2 answers, ccna 1 final exam, ccna 4 chapter 3, ccna1 final exam answers 2011, ccna 1 chapter 4 answers, ccna 3 chapter 1, ccna 1 chapter 11 answers, ccna 1 chapter 10 answers, ccna 3 final exam, ccna 1 chapter 7 answers, ccna 1 chapter 9 answers, A network technician analyzes the network and notices late collisions The collisions occur accompanied by jabber that originates from the server What is the likely cause of the problem?, Refer to the exhibit A network administrator has designed and implemented a hierarchical network What is the maximum network diameter between any two hosts on the network?, ccna 2 chapter 4 answers, ccna 2 chapter 10, ccna 1 chapter 8 answers, ccna chapter 9 answers, A company is deciding which WAN connection type it should implement between its main office and branch offices The company wants to use a cost-effective service that provides virtual circuits between each office The company also wants to be able to transm, ccna 2 chapter 6 answers, A network administrator is tasked with connecting two workgroups that are configured to use different subnets Which device should be selected to allow connectivity between users on the two networks?, ccna chapter 5 answers, ccna 3 chapter 2, ccna 4 chapter 4, ccna 2 chapter 3 answers, ccna 2 chapter 7 answers, CCNA 4 chapter 1, ccna 2 chapter 10 answers, CCNA 3 final, ccna 2 chapter 6, Which configuration on the vty lines provides the best security measure for network administrators to remotely access the core routers at headquarters?, ccna 3 chapter 3 answers, ccna 2 chapter 5 answers, Which statement accurately describes a switch with all access ports assigned to the same VLAN?, ccna 1 final exam 2011, ccna chapter 8 answers, ccna 1 chapter 5 answers, ccna 3 chapter 6, Which two conditions would require a VTP client to send a request advertisement to a VTP server? (Choose two ), ccna 4 chapter 2, ccna 2 chapter 5, ccna chapter 11 answers, A network administrator needs to provide administrative access for certain users Which mode will allow users access to both the show and debug commands?, A route to a destination network is learned from multiple routing protocols If each learned route has the same network prefix what is used by a Cisco router to select the preferred route to the destination that will be installed in the routing table?, ccna 2 chapter 7, Refer to the exhibit What is the total amount of RAM on the router?, ccna 3 chapter 5, CCNA1 final exam 2011, ccna chapter 4 answers, ccna 4 final exam answers, Refer to the exhibit Host A is configured with the correct IP address for the default gateway of the router R1 FastEthernet0/1 interface How will a packet that is sent from host A to host B be handled by the devices on the network?, An administrator learns of an e-mail that has been received by a number of users in the company This e-mail appears to come from the office of the administrator The e-mail asks the users to confirm their account and password information Which type of secu, ccna 1 chapter 7, ccna1 final exam, ccna 1 chapter 11, ccna 2 chapter 3, ccna chapter 6 answers, CCNA 1 Chapter 8, ccna chapter 7 answers, ccna chapter 2 answers, ccna 1 chapter 10, ccna 2 chapter 1, CCNA 1 chapter 3 answers, What are two purposes for configuring a banner on a router? (Choose two ), ccna 2 chapter 8, CCNA 3 chapter 3, ccna 3 chapter 4, ccna 3 chapter 7, ccna 2 chapter 1 answers, ccna 2 chapter 4, ccna 4 chapter 3 answers, Refer to the exhibit Why must the NIC of host H1 operate in half-duplex mode?, ccna 2 chapter 9 answers, Refer to the exhibit At which layer of the OSI model will router R2 re-encapsulate a packet that is received from host A and is destined for host B?, ccna 4 chapter 5, ccna 2 chapter 8 answers, Refer to the exhibit Which two switch interfaces would be RSTP edge ports? (Choose two ), During the initial configuration



of a router the administrator enters the command no service config How will the router behave as a a result of this command?

Recent Posts

� CCNA 1 Final Exam Answers 2011 � CCNA 4 Final Exam V4.0 Answers � CCNA 4 Chapter 8 V4.0 Answers � CCNA 4 Chapter 7 V4.0 Answers � CCNA 4 Chapter 6 V4.0 Answers

Recent Comments

� joynoy on CCNA 4 Chapter 1 V4.0 Answers � joynoy on CCNA 4 Chapter 2 V4.0 Answers � Satman on CCNA 1 Final Exam Answers 2011 � Satman on CCNA 1 Final Exam Answers 2011 � TeddyG on CCNA 4 Final Exam V4.0 Answers

Directories

Copyright © 2011 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).

Rate My Blog

--



ccna 1 final

Documents

ccna final exam answers

ccna test answers

ccna module answers

ccna chapter answers

ccna v4 answers home

telnet password

telnet access

host http