ccna syllabus outline
TRANSCRIPT
-
7/31/2019 CCNA Syllabus Outline
1/2
CCNA Syllabus OutlineModule 1: Networking Basics
Objective
This module provides the fundamental knowledge required to understandcore Local Area Networking concepts.
Prerequisites:None
Course Outline
Introduction to Networking
OSI Model
Networking Fundamentals and Networking Media
Cabling LANs and WANs
Ethernet Fundamentals
Ethernet Switching
TCP/IP Protocol Suite and IP Addressing
Routing Fundamentals and Subnets
TCP/IP Transport and Application Layer
Skills Transfer Objectives
Having successfully completed this course, you will have learnt how to:
Build a small LAN using network devices
Configure networking in a small LAN
Build networking cables
Manipulate IP Addresses
Module 2: Routers and Routing Basics
Objective
This module provides the fundamental knowledge and skills required tounderstand and configure Routers.
Prerequisites: Module 1
Course Outline
WANs and Routers
Introduction to Router
Configuring a Router
Managing Cisco IOS Software
Routing and Routing Protocols
Distance Vector Routing Protocols
TCP/IP Suite Error and Control Messages
Basic Router Troubleshooting
Access Control Lists (ACLs)
Skills Transfer Objectives
Having successfully completed this course, you will have learnt how to:
Configure a basic router
Create a subnetted IP Addressing scheme Implement security on router interfaces
Module 3: Switching Basics and Intermediate Routing
Objective
This module provides the fundamental knowledge and skills required to
understand and configure basic switching and more advanced routing.
Prerequisites: Modules 1 & 2
Course Outline
Introduction to Classless Routing
Single-Area OSPF
EIGRP
Switching Concepts
Switches and Switch Configuration
Spanning Tree Protocol
Virtual LANs
VLAN Trucking Protocol
Skills Transfer Objectives
Having successfully completed this course, you will have learnt how to: Configure a basic VLAN
Understand the workings of STP and Trucking
Configure OSPF and EIGRP on a router
Configure standard and extended Access Control Lists on a router.
Module 4: WAN Technologies
Objective
This module focuses on advanced IP addressing techniques using NetworkAddress Translation (NAT), Port Address Translation (PAT) and DHCP.
This module provides the fundamental knowledge and skills required to
understand and configure remote access routers.
Prerequisites: Modules 1, 2 and 3
-
7/31/2019 CCNA Syllabus Outline
2/2
Course Outline
Scaling IP Addresses
WAN Technologies
PPP
ISDN and DDR
Frame Relay
Skills Transfer Objectives
Having successfully completed this course, you will have learnt how to:
Configure a router to work with PPP, ISDN and Frame Relay
Configure authentication on a router using PPP
Configure NAT, PAT and DHCP on a router