ce363 data communications & networking chapter 7 network layer: internet protocol
TRANSCRIPT
![Page 1: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/1.jpg)
CE363 Data Communications & Networking
Chapter 7
Network Layer:Internet Protocol
![Page 2: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/2.jpg)
Chapter 7 – Network Layer: Internet Protocol
INTERNETWORKING Internet Network Layer Internet as a Datagram Network Internet as a Connectionless Network
IPv4 Protocol Datagram Format Fragmentation
IPv6 Protocol Advantage Datagram Format Fragmentation
TRANSITION FROM IPv4 TO IPv6 Dual Stack Tunneling Header Translation
2
![Page 3: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/3.jpg)
Internetworking: connecting networks together Internetworking: connecting networks together to make an internetwork (internet). to make an internetwork (internet).
Internet Network LayerInternet as a Datagram NetworkInternet as a Connectionless Network
Topics discussed in this section:Topics discussed in this section:
INTERNETWORKING
3
![Page 4: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/4.jpg)
Links between two hosts
INTERNETWORKING
4
![Page 5: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/5.jpg)
Network layer in an internetwork
INTERNETWORKING
5
![Page 6: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/6.jpg)
Network layer at the source and destination
INTERNETWORKING
6
![Page 7: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/7.jpg)
Network layer at the router
INTERNETWORKING
7
![Page 8: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/8.jpg)
Switching at the network (IP) layer in the Internet uses the datagram approach to
packet switching.
Internet as a Datagram Network
8
![Page 9: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/9.jpg)
Communication at the network (IP) layer in the Internet is connectionless.
Internet as a Connectionless Network
9
![Page 10: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/10.jpg)
IPv4 Protocol
10
![Page 11: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/11.jpg)
The Internet Protocol version 4 (IPv4) is the delivery mechanism used by the TCP/IP protocols.
Datagram FormatFragmentation
Topics discussed in this section:
IPv4 Protocol
11
![Page 12: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/12.jpg)
Position of IPv4 in TCP/IP protocol suite
IPv4 is an unreliable and connectionless datagram protocol. It is a best-effort delivery service;
provides no error control or flow control.
IPv4 Datagram
12
![Page 13: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/13.jpg)
IPv4 datagram format
IPv4 Datagram
13
20-65,535 bytes
![Page 14: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/14.jpg)
IPv4 datagram format
IPv4 Datagram
14
20-65,535 bytes
![Page 15: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/15.jpg)
• VER (4 bits) : defines the version of IP, current version is (IPv4)
• HLEN (4 bits) : defines the header length, multiple of 4 bytes max length = (1111)2 X 4 = 60 bytes
min length = (0101)2 X 4 = 20 bytes
• Total Length (16 bits) : defines the total datagram length up to 65,535 bytes
• Identification (16 bits) : sequence number used in fragmentation
• Fragmentation offset (13 bits) : pointer to show the offset of the data in the original datagram
• Time to Live (8 bits) : # of the hops a datagram can be travel before it is discarded
• Protocol (8 bits) : defines the higher layer protocol (TCP or UDP)
Fields of IP Datagram
IPv4 Datagram
15
![Page 16: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/16.jpg)
Protocol fieldIPv4 Datagram
16
![Page 17: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/17.jpg)
IPv4 DatagramService Types
Activities requiring immediate attention/response need minimum delay. Activities that send bulk data require maximum throughput.
Management activities need maximum reliability. Background activities need minimum cost.
17
4 bits specifies the type of services TOS3 bits defines priority of the datagram (but never used in IPv4)
![Page 18: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/18.jpg)
Default types of service
IPv4 Datagram
18
![Page 19: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/19.jpg)
IPv4 datagram format
IPv4 Datagram
19
20-65,535 bytes
![Page 20: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/20.jpg)
An IPv4 packet has arrived with the first 8 bits as shown:01000010
The receiver discards the packet. Why?
SolutionThere is an error in this packet. The 4 leftmost bits (0100) show the version, which is correct. Next 4 bits (0010) show an invalid header length (2×4 = 8) The minimum number of bytes in the header must be 20. The packet has been corrupted in transmission.
Example 1
20
![Page 21: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/21.jpg)
In an IPv4 packet, the value of HLEN is 1000 in binary. How many bytes of options are being carried by this packet?
SolutionThe HLEN value is 8, which means the total number of bytes in the header is 8 × 4 = 32 bytes. The first 20 bytes are the base header, the next 12 bytes are the options.The header options are usually used for network testing and debugging.
Example 2
21
![Page 22: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/22.jpg)
In an IPv4 packet, the value of HLEN is 5, and the value of the total length field is 0x0028 (40 bytes). How many bytes of data are being carried by this packet?
SolutionThe HLEN value is 5, which means the total number of bytes in the header is 5 × 4 = 20 bytes (no options). The total length is 40 bytes, which means the packet is carrying 20 bytes of data (40 − 20).
Example 3
22
![Page 23: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/23.jpg)
An IPv4 packet has arrived with the first few hexadecimal digits as shown.
0x45000028000100000102 . . .How many hops can this packet travel before being dropped? The data belong to what upper-layer protocol?SolutionTo find the time-to-live field, we skip 8 bytes. The time-to-live field is the ninth byte, which is 01. This means the packet can travel only one hop. The protocol field is the next byte (02), which means that the upper-layer protocol is IGMP.
Example 4
23
![Page 24: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/24.jpg)
Maximum transfer unit (MTU)
The maximum length of the IPv4 datagram equal to 65,535 bytes.
The individual networks in the internet may have different max frame size.
The transport layer will segment the data into a size that can be accommodated by IPv4 and the data link layer in use.
IPv4 Fragmentation
24
![Page 25: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/25.jpg)
MTUs for some networks
IPv4 Fragmentation
25
![Page 26: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/26.jpg)
• Source host or routers need to fragment the incoming datagram into smaller pieces called segments or fragments before transmitting it to the next network.
• The host or router that fragments a datagram must change the values of three fields in the header: flags, offset, and total length. The rest of the header fields must be copied. Of course, the value of the checksum must be recalculated.
Data
Header
Data
Header
Data
Header
Data Length = 404 bytes
Data length = 208Offset = 0Flag =1
Data length = 196Offset = 208/8=26Flag =0
• Example
IPv4 Fragmentation
26
![Page 27: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/27.jpg)
• Identification: sequence number of the segment is assigned by source.
• The identification number helps the destination in reassembling the datagram.
• All fragments having same identification value must be assembled into a datagram.
• Offset: a pointer to show the offset of the data in the original datagram (measured in units of 8 bytes).
Data
Header
Data
Header
Data
Header
Data Length = 404 bytes
Data length = 208Offset = 0Flag =1
Data length = 196Offset = 208/8=26Flag =0
• Example
IPv4 Fragmentation
27
![Page 28: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/28.jpg)
Flags used in fragmentation
IPv4 Fragmentation
• Flags is a 3-bit field. The first bit is reserved.
• The second bit is called the do not fragment bit.
• If its value is 1, the machine must not fragment the datagram. If it cannot pass the datagram through any available physical network, it discards the datagram and sends an ICMP error message to the source host.
• If its value is 0, the datagram can be fragmented if necessary.
• The third bit is called the more fragment bit.
• If its value is 1, it means the datagram is not the last fragment; there are more fragments after this one.
• If its value is 0, it means this is the last or only fragment.
28
![Page 29: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/29.jpg)
Fragmentation MTU = 1,400 bytes
IPv4 Fragmentation Example: A datagram with data size of 4000 bytes fragmented into three fragments.
29
![Page 30: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/30.jpg)
Detailed fragmentation example
IPv4 Fragmentation
30
Fragment 2 passes through a network with MTU = 800
![Page 31: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/31.jpg)
Detailed fragmentation example
IPv4 Fragmentation
31
![Page 32: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/32.jpg)
IPv4 datagram format
IPv4 Datagram
32
20-65,535 bytes
![Page 33: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/33.jpg)
A packet has arrived with an M bit value of 0. Is this the first fragment, the last fragment, or a middle fragment? Do we know if the packet was fragmented?
SolutionIf the M bit is 0, it means that there are no more fragments; the fragment is the last one. However, we cannot say if the original packet was fragmented or not. A non-fragmented packet is considered the last fragment.
Example 5
33
![Page 34: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/34.jpg)
A packet has arrived with an M bit value of 1. Is this the first fragment, the last fragment, or a middle fragment? Do we know if the packet was fragmented?
SolutionIf the M bit is 1, it means that there is at least one more fragment. This fragment can be the first one or a middle one, but not the last one. We don’t know if it is the first one or a middle one; we need more information (value of fragmentation offset).
Example 6
34
![Page 35: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/35.jpg)
A packet has arrived with an M bit value of 1 and a fragmentation offset value of 0. Is this the first fragment, the last fragment, or a middle fragment?
SolutionBecause the M bit is 1, it cannot be the last (it is either the first fragment or a middle one). Because the offset value is 0, it must be the first fragment.
Example 7
35
![Page 36: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/36.jpg)
A packet has arrived in which the offset value is 100. What is the number of the first byte? Do we know the number of the last byte?
SolutionTo find the number of the first byte, we multiply the offset value by 8. This means that the first byte number is 800. We cannot determine the number of the last byte unless we know the length.
Example 8
36
![Page 37: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/37.jpg)
A packet has arrived in which the offset value is 100, the value of HLEN is 5, and the value of the total length field is 100. What are the numbers of the first byte and the last byte?
SolutionThe first byte number is 100 × 8 = 800. The total length is 100 bytes, and the header length is 20 bytes (5 × 4), which means that there are 80 bytes in this datagram. If the first byte number is 800, the last byte number must be 879.
Example 9
37
![Page 38: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/38.jpg)
Checksum calculation for IPv4 header: •The header is divided into 16-bit sections. •All the sections are added .•The sum is complemented. •The result is inserted in the checksum field.
Example 10 (Checksum)
38
![Page 39: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/39.jpg)
Example of checksum calculation in IPv4
Example 10 (Checksum)
39
![Page 40: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/40.jpg)
Write a procedure to reassemble the original datagram from the fragments at the final destination host.Assume that all the fragments are received (none of them is lost).
Assignment
40
![Page 41: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/41.jpg)
Each fragment may follow a different path and arrives out of order. The final destination host can reassemble the original datagram from the fragments received (if none of them is lost) by using the following strategy:
1. The first fragment has an offset field value of zero. The first fragment is placed at the beginning of the data section in the reassembled datagram.
2. Multiply the offset value of the second fragment by 8 (to get the length of the first fragment). The second fragment is placed at the resulting offset value in the reassembled datagram.
3. Multiply the offset value of the third fragment by 8 (to get the length of the first fragment and second fragments). The third fragment is placed at the resulting offset value in the reassembled datagram.
4. Continue the process. The last fragment has a More bit value of 0.
Reassembly of the original datagram
41
![Page 42: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/42.jpg)
IPv6 Protocol
42
![Page 43: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/43.jpg)
IPv6 Protocol is the new version of the network layer protocol in the TCP/IP protocol suite.
• The original network layer protocol in the TCP/IP protocol suite (IPv4) was well designed.
• However, data communication has evolved since the inception of IPv4 in the 1970s.
• Now, IPv4 has some deficiencies that make it unsuitable for the fast-growing Internet.
AdvantagesDatagram FormatFragmantation
Topics discussed in this section:
IPv6 Protocol
43
![Page 44: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/44.jpg)
• Address depletion: Despite all short-term solutions, such as subnetting, classless addressing, and NAT, address depletion is still a long-term problem in the Internet.
• Real-time application: This type of transmission requires minimum delay strategies and reservation of resources not provided in the IPv4 design.
• Security: Internet must accommodate encryption and authentication of data for some applications which is not provided by IPv4.
• Note on IP Related protocols:
• IPv4 ICMP is modified and other protocols in the network layer, such as ARP, RARP, and IGMP, were either deleted or included in the ICMPv6 protocol.
• Routing protocols, such as RIP and OSPF, were slightly modified to accommodate IPv6 changes.
IPv4 deficiencies
44
![Page 45: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/45.jpg)
• Larger address space: An IPv6 address is 128 bits long compared with the 32-bit address of IPv4.
• Better header format: IPv6 uses new header format which speeds up and simplifies the routing process.
• New options: IPv6 new options allow additional functionalities and allow protocol extension for new technologies or applications.
• Support for resource allocation: In IPv6, the type-of-service field has been removed, and a mechanism (called Flow label) has been added to enable the source to request special handling of the packet. This mechanism can be used to support traffic such as real-time audio and video.
• Support for more security: The encryption and authentication options in IPv6 provide confidentiality and integrity of the packet.
IPv6 Advantages
45
![Page 46: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/46.jpg)
IPv6 datagram header and payload
IPv6 Datagram
46
![Page 47: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/47.jpg)
IPv6 datagram header and payload
IPv6 Datagram
Base Header fields (40 bytes):
Version. The first 4-bit field defines the version number of the IP. For IPv6, the value is 6.
47
![Page 48: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/48.jpg)
Format of IPv6 datagram header
IPv6 Datagram
Source/ Destination address field is 16-byte (128-bit)
48
![Page 49: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/49.jpg)
IPv6 Datagram
Source/ Destination address field is 16-byte (128-bit)
49
Format of IPv6 datagram header
![Page 50: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/50.jpg)
IPv6 DatagramBase Header fields (40 bytes):
Priority. The 4-bit priority field defines the priority of the packet with respect to traffic congestion.
Flow label. The flow label is a 3-byte (24-bit) field that is designed to provide special service (e.g. security) for particular flow of data.
Payload length. The 2-byte payload length field defines the length of the IP datagram excluding the base header.
Next header. The next header is an 8-bit field defining the header that follows the base header in the datagram. The next header is either one of the optional extension headers used by IPv6 or the protocol value such as UDP or TCP.
Hop limit. This 8-bit hop limit field serves the same purpose as the TTL field in IPv4.
50
![Page 51: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/51.jpg)
Priorities for congestion-controlled traffic
51
The priority field of the IPv6 packet defines the priority of each packet with respect to other packets from the same source. For example, if one of two consecutive datagrams must be discarded due to congestion, the datagram with the lower packet priority will be discarded.
IPv6 Datagram
![Page 52: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/52.jpg)
Priorities for noncongestion-controlled traffic
Priority for traffic that expects minimum delay is 8 to 15 >> discarding of packets is not desirable.
Data containing less redundancy can be given a higher priority (15)>> example: low-fidelity audio or video.
Data containing more redundancy can be given a lower priority (8)>> example: high-fidelity audio or video.
52
IPv6 Datagram
![Page 53: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/53.jpg)
Comparison between IPv4 and IPv6 packet headers
53
![Page 54: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/54.jpg)
IPv6 Fragmentation
The concept of fragmentation is the same as that in IPv4.
In IPv4, the source or a router is required to fragment if the size of the datagram is larger than the MTU of the network over which the datagram travels.
In IPv6, only the original source can fragment.
A source must use a path MTU discovery technique to find the smallest MTU supported by any network on the path. The source then fragments using this knowledge.
54
![Page 55: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/55.jpg)
TRANSITION FROM IPv4 TO IPv6
55
![Page 56: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/56.jpg)
TRANSITION FROM IPv4 TO IPv6Because of the huge number of systems on the Internet, the transition from IPv4 to IPv6 could not happen suddenly. It takes a considerable amount of time before every system in the Internet can move from IPv4 to IPv6. The transition must be smooth to prevent any problems between IPv4 and IPv6 systems.
Dual StackTunnelingHeader Translation
Topics discussed in this section:
56
![Page 57: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/57.jpg)
Three transition strategies
TRANSITION FROM IPv4 TO IPv6
57
![Page 58: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/58.jpg)
Dual stack
• Each station must run IPv4 and IPv6 simultaneously until all the Internet uses IPv6.• The source host queries the DNS. If the DNS returns an IPv4 address, the source host sends an IPv4 packet. If the DNS returns an IPv6 address, the source host sends an IPv6 packet.
TRANSITION FROM IPv4 TO IPv6
58
![Page 59: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/59.jpg)
Tunneling strategy
TRANSITION FROM IPv4 TO IPv6
• An IPv4 header is added to the IPv6 packet when it enters the IPv4 region and removed when it exits the region.• The protocol value in IPv4 is set to 41 during tunneling.
59
![Page 60: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/60.jpg)
Header translation strategy
TRANSITION FROM IPv4 TO IPv6
The header of the IPv6 packet is converted to an IPv4 header as the receiver does not understand IPv6.
60
![Page 61: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/61.jpg)
Header translation rules
TRANSITION FROM IPv4 TO IPv6
61
![Page 62: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/62.jpg)
Format of an IPv6 datagram
TRANSITION FROM IPv4 TO IPv6
Format of an IPv4 datagram
![Page 63: CE363 Data Communications & Networking Chapter 7 Network Layer: Internet Protocol](https://reader038.vdocuments.net/reader038/viewer/2022110205/56649c7b5503460f9492f609/html5/thumbnails/63.jpg)
Chapter 7 – Network Layer: Internet Protocol
INTERNETWORKING Internet Network Layer Internet as a Datagram Network Internet as a Connectionless Network
IPv4 Protocol Datagram Format Fragmentation
IPv6 Protocol Advantage Datagram Format Fragmentation
TRANSITION FROM IPv4 TO IPv6 Dual Stack Tunneling Header Translation
63