certificado de conformidade - bartec - … · abnt nbr iec 60079-18:2007 ... aço inoxidável ou...
TRANSCRIPT
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 1/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Solicitante / Applicant
Bartec GmbH Max-Eyth Str. 16 97980 - Bad Mergentheim - Germany CNPJ: Não aplicável / Not applicable
Fabricante / Manufacturer
Sob “descrição do produto” Under “product description”
Local de Montagem / Assembly Location Não aplicável / Not applicable
Importador / Importer Não aplicável / Not applicable
Marca Comercial / Trademark Não aplicável / Not applicable
Produto Certificado / Certified Product Painel de Medição, Controle e Chaveamento Measuring, Control and Switchgear combination
Modelo / Model 07-31**-****/**** 07-3S**-****/****
Lote ou Número de Série / Lot or Serial Number Não aplicável / Not applicable
Marcação / Marking Sob “descrição do produto” Under “product description”
Normas Aplicáveis / Applicable Standards ABNT NBR IEC 60079-0:2008 + Errata 1:2011 ABNT NBR IEC 60079-1:2009 + Errata 1:2011 ABNT NBR IEC 60079-5:2011 ABNT NBR IEC 60079-7:2008 + Errata 1:2010 ABNT NBR IEC 60079-11:2009 ABNT NBR IEC 60079-18:2007 ABNT NBR IEC 60079-28:2010 + Errata 1:2014 ABNT NBR IEC 60079-31:2011
Programa de certificação ou Portaria / Certification Program or Decree
Portaria no. 179, de 18 de maio de 2010 do INMETRO. INMETRO Portaria 179 as of May 18, 2010
Concessão Para / Concession for Ostentar o Selo de Identificação da Conformidade do Sistema Brasileiro de Avaliação da Conformidade (SBAC) sobre o(s) produto(s) relacionado(s) neste certificado. Bearing the Conformity Identification Seal of the Brazilian System of Conformity (SBAC) on the product covered by this certificate.
Emissão / Date of issue 14 de setembro de 2011 / September 14, 2011 Revisão / Revision date 03 de julho de 2017 / July 03, 2017 Validade / Expire date 13 de setembro de 2018 / September 13, 2018
Emerson Luiz Baroni
Gerente de Certificações / Certification Manager
UL do Brasil Certificações, organismo acreditado pela Coordenação Geral de Acreditação do INMETRO – CGCRE, segundo o registro No.: OCP-0029 confirma que o produto está em conformidade com a(s) Norma(s) e programas ou Portarias acima descritas. UL do Brasil Certificações , Certification Body accredited by Coordenação Geral de Acreditação do INMETRO - CGCRE according to the register No.: OCP-0029 confirms that the product is in compliance with the standards and certification Program or Decree above mentioned.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 2/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
MODELO DE CERTIFICAÇÃO / CERTIFICATION MODEL:
Modelo com Avaliação do Sistema de Gestão da Qualidade do Processo de Produção do Produto e Ensaios no Produto Quality Management System Evaluation of the Product Production Process and Product Test Model
Modelo Ensaio de Lote Lot Test Model
CERTIFICADO DE ORIGEM EMITIDO NO EXTERIOR / ORIGINAL CERTIFICATE ISSUED ABROAD:
DOCUMENTO / DOCUMENT NÚMERO / NUMBER EMISSÃO / ISSUE DATE VALIDADE / VALID DATE Certificado do Produto Product Certificate IECEx IBE 12.0031, Issue No: 0 2013-07-17 NA
LABORATÓRIO DE ENSAIOS / TESTING LABORATORY: IBExU Institut für Sicherheitstechnik GmbH Fuchsmühlenweg 7, 09599 Freiberg – Germany. DESCRIÇÃO DO PRODUTO / PRODUCT DESCRIPTION: O painel de medição, controle e chaveamento tipo 07-31**-**** / * *** é composto por um ou por uma combinação de invólucros fabricados em resina de poliéster, aço inoxidável ou alumínio. Estes invólucros possuem o tipo de proteção de Segurança Aumentada Ex “e” e são destinados à acomodação de equipamentos de medição, controle e chaveamento; assim como terminais para circuitos intrinsecamente e não intrinsecamente seguros. Podem também conter elementos atuadores, luzes indicadoras e janelas de inspeção. Os elementos de conexão para circuitos intrinsecamente seguros são identificados pela cor azul clara. A entrada dos cabos nos painéis é realizada através de prensa cabos à prova de explosão. Invólucros vazios, invólucros com componentes montados externa e internamente, bem como estes próprios componentes foram ensaiados e certificados de acordo com os requisitos da Portaria 179:2010 emitida pelo INMETRO, e estão listados neste certificado. O painel de medição, controle e chaveamento tipo 07-3S**-**** / * *** é composto por um ou por uma combinação de invólucros fabricados em resina de poliéster, aço inoxidável ou alumínio. Estes invólucros possuem o tipo de proteção por invólucro Ex “t” para poeiras combustíveis e são destinados à acomodação de elementos atuadores, luzes indicadoras e janelas de inspeção. As conexões dos cabos são realizadas através de conexões de entrada protegidas com tipo de proteção a prova de explosão “Ex d”. Invólucros vazios, invólucros com componentes montados externa e internamente, bem como estes próprios componentes foram ensaiados e certificados de acordo com os requisitos da Portaria 179:2010 emitida pelo INMETRO e estão listados neste certificado. The combination type 07-31**-**** / * *** consists of one or a number of enclosures which are made from polyester resin, stainless steel or aluminum and are designed to type of protection Increased Safety Ex “e”. The enclosures are to accommodate measuring, control and switchgear, as well as terminals for intrinsically safe and non-intrinsically safe circuits, and may, if required, be fitted with actuator elements, indicator lights, and inspection windows. The connection elements for intrinsically safe circuits will be identified, e. g. by a light-blue color. Connection is made by means of explosion-proof cable entries. The empty enclosures as well as all internally and externally fitted elements are tested and certified under separate examination certificates. The combination type 07-3S**-**** / * *** consists of one or a number of enclosures which are made from polyester resin, stainless steel or aluminum and designed to type of protection Protection by Enclosure Ex “t”. It may be fitted with actuator elements, indicator lights, and inspection windows. Connection is by means of explosion-proof cable entries. The empty enclosures as well as all externally fitted elements are tested and certified under separate examination certificates.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 3/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Marcação / marking
07-31**-**** / * ***
Ex d e i1* [ib] m1** op is q II1*** T1**** Gb
Ex d e i1* [ia Ga] m1** op is q II1*** T1**** Gb
-***** °C ≤ Ta ≤ ***** °C
07-3S**-**** / * ***
Ex tb [ib] III2*** T2**** °C Db
Ex tb [ia Da] III2*** T2**** °C Db
-***** °C ≤ Ta ≤ ***** °C
Onde: Where:
1* Tipo de proteção: Segurança Intrínseca Intrinsic Safety Type of protection
ia ou/or ib
1** Tipo de proteção: Encapsulamento Encapsulated Type of protection
ma ou/or mb
1*** Grupos de Gás Gas Group
IIC, IIB ou/or IIA
2*** Grupos de Poeira Dust Group
IIIC, IIIB ou/or IIIA
1**** Classe de Temperatura Temperature Class
T6, T5, T4 ou/or T3
2**** Máxima temperatura de superfície Maximum surface temperature for Dust
T80 °C, T100 °C ou/or T130 °C
***** Temperatura Ambiente Ambient temperature range
A temperatura ambiente depende dos componentes instalados nos painéis. The ambient temperature range depends on the Ex component installed.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 4/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Locais de fabricação e montagem Manufacturing and assembling locations
Bartec GmbH Max-Eyth-Str. 16, 97980 Bad Mergentheim - Germany CNPJ : Não aplicável / Not applicable
Bartec Pte. Ltd. 63, Hillview Avenue, #07-20/21 Lam Soon Building, SGP - 669569, Singapore CNPJ : Não aplicável / Not applicable
Nomenclatura Nomenclature Tipo Type No. 07 - 3 * * * - * * * * / . . . .
Caractere Character A B C D E F G H I J K L M
Caractere Character
Caractere para: Character for:
Variante: Variant:
Descrição Description
A Programa básico
Basic program 07 Programa básico STVT
Basic program STVT
B Tipo de dispositivo
Type of device 3 Estação de controle MSR
MSR Control Station
C Ex-B 1 Gás
Gas
S Poeira Dust
D, E Tipo de invólucro / Material
Enclosure type / Material
Veja lista própria de “Tipo de invólucro / Material” See separate listing of "enclosure type/material"
F, G, H, I Tamanho do invólucro
Enclosure size
Veja lista própria de “Tamanho do invólucro” See separate listing of "enclosure size"
J, K, L, M Caracteres sem efeito na proteção contra explosão
Characters without effect on explosion protection
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 5/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Invólucros / Cabines e caixas de distribuição certificadas INMETRO INMETRO certified enclosures / Cabinets and distribution Boxes
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Invólucros Vazios
Empty enclosures
BARTEC VARNOST d.o.o.
Cesta 9.avgusta 59 SI 1410 Zagorje ob Savi Slowenien
07-5185-..../.... TÜV 13.1693 U Ex e IIC Gb
Ex tb IIIC Db IP66
Fibra de vidro reforçada em
polyester, livre de halógeno e
superfície preta com resistividade
< 109 Ω Glass-fiber reinforced polyester, halogen-
free black surface
resistance < 109 Ω
Invólucros Vazios e caixas de distribuição Empty enclosures
and distribution boxes
07-56..-…. TÜV 13.1692 U TÜV 13.1692 U
Ex e IIC T6/T5 Gb Ex tb IIIC T80 °C/T95 °C Db
Ex e IIC Gb Ex tb IIIC Db IP66
1.4404, AISI 316 L aço inoxidável
opcional alta qualidade
1.4301, AISI 304 aço inoxidável alta qualidade 1.4404, AISI 316 L
high quality stainless steel
optional 1.4301, AISI 304 high quality stainless steel
Caixas de distribuição em
Polyester Polyester distribution
boxes
07-51..-.... TÜV 13.1193 X Ex e IIC T5/T6 Gb Ex tb IIIC T80°C, T95°C Db IP66
Fibra de vidro reforçada em
polyester, livre de halógeno e
superfície preta com resistividade
< 109 Ω Glass-fiber reinforced polyester, EN 60079-0
halogen-free black surface
resistance < 109 Ω
Caixas de
distribuição em alumínio
Aluminium distribution boxes
07-51..-.... 11/UL-BRHZ-0100X
Ex e IIC Gb Ex tb IIIC Db IP66
Alumínio fundido ou moldagem
shell AlSi 12, Mg < 6
rosca -% Aluminium, die or
shell casting, AISi 12, Mg < 6 thread
-%
Caixa de Junção Junction box
07-5101-****/****
e/and 07-5102-
****/****
TÜV 16.1891 Ex e ia/ib IIA, IIB, IIC T6, T5 Gb
Ex tb IIIC T80 °C, T95 °C Db IP66
Alumínio / aluminum
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 6/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Invólucro vazio Empty enclosure
BARTEC TECHNOR AS
Dusavikveien 39 N-4007 Stavanger,
Norway
TNCN*** DNV 16.0023U
Ex e IIC Gb Ex tb IIIC Db
IP66/IP67/IP68
-40 ºC ≤ Ta ≤ +100 ºC (Para vedações em Neoprene)
-50 ºC ≤ Ta ≤ +110 ºC (Para vedações em silicone SIL 16)
-50 ºC ≤ Ta ≤ +200 ºC (Para
vedações em silicone)
Aço inoxidável AISI 316L / Stainless Steel AISI 316L
BARTEC
TECHNOR AS Nesøyra 16
N-4208 Sauda, Norway
Caixas de Terminais
Terminal Boxes
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
8146/1…-.. and
8146/2…-.. UL-BR 12.0204
Ex d e ia ib [ia Ga] mb IIA, IIB, IIC, T6, T5, T4 Gb
Ex tb IIIC T80 ⁰C, T95 ⁰C ou T130 ⁰C
Fibra de vidro reforçada em
resina polyester Glass fibre reinforced
polyester resin
Caixas de ligação
Connection boxes
NUOVA ASP Via de Gasperi, 26 I-20090 Pantigliate
– Milano - Italy
ESA / ESX CEPEL 12.2158
Ex (*) e IIC T6...T4 Gb IP66/65 -60 ºC ≤ Ta ≤ +80 ºC
Ex tb IIIC T85 ºC...T100 ºC Db IP66/65
-60 ºC ≤ Ta ≤ +60 ºC
Nota: O símbolo * indica que a marcação é complementada, em ordem alfabética, com os tipos de proteção dos componentes
instalados internamente à caixa. Note: this * indicates that the marking is supplemented, in alphabetic order, with the type of protection of the component
that is installed inside the box.
Modelo ESA**** são fabricadas em alumínio /
ESA**** are made of aluminum
Modelo ESX**** são fabricadas
em aço inoxidável /
ESX**** are made of Stainless Steel
Invólucros Vazios
Empty enclosures ROSE Systemtechnik
GmbH Erbeweg 13 32457 Porta Westfalica Germany
34… TÜV 12.2327 U Ex e IIC T6/T5/T4 Gb
Ex tb IIIC T85°C/T100°C/T135°C Db IP66
Aço inoxidável 1.25 mm ou
1.5 mm; 14301/304; 1.4404/316L
Stainless steel 1.25 mm or 1.5 mm;
14301/304; 1.4404/316L
Invólucros Vazios
Empty enclosures Polyester
KE26 TÜV 12.2325 U Ex e IIC T6/T5/T4 Gb
Ex tb IIIC T85°C/T100°C/T135°C Db IP66
Fibra de vidro reforçada em
polyester duroplastic, com
grafite glass fibre reinforced duroplastic polyester,
graphite added
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 7/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Invólucros Vazios
Empty enclosures AL-KE 25 TÜV 12.2326 U
Ex e IIC T6/T5/T4 Gb Ex tb IIIC T85°C/T100°C/T135°C
Db IP66
DIN EN 1706 EN AC-AlSi 12 (Fe)
Disjuntores, Fusíveis, Diodos e Proteção de Motores certificados INMETRO
INMETRO certified Circuit Breaker, Fuses, Diodes, Motor Protection
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Mini Disjuntor IEC
Miniature Circuit-Breaker IEC
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
Series 8562
UL-BR 13.0648U Ex d e IIC Gb
Invólucro em resina epoxy
Enclosure Material Epoxy resin
Disjuntor de corrente residual
Residual Current Circuit-Breaker
FI Series 8562
Disjuntor de corrente residual
com proteção integral de
sobrecorrente Residual Current
Circuit-Breaker with Integral Overcurrent
Protection
FI/LS Series 8562
Interruptor de falha de
aterramento Ground Fault
Interrupter
Series 8562
Bases de fusíveis pequenos
Small Fuse Bases Series 8560
UL-BR 14.0065U Ex e mb IIC Gb Invólucro em poliamida
Enclosure material Polyamide
Base de fusível Fuse Base
Series 8561/01
and Series 8561/02
UL-BR 14.0326U Ex d e IIC Gb
Invólucro em resina epoxy Enclosure Material
Epoxy resin
Disjuntor de Proteção de
Motor Motor Protection Circuit Breaker
Series
8523/8.-..-....
UL-BR 14.0157U
Ex d e IIC Gb Ex d e I Mb
Invólucro à prova de explosão
Explosion proof enclosure
Fusível para 1.25 A com terminais
simples Fuse max. 1.25 A with
single terminals
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
07-7311-61J2/.TA0
TÜV 13.1677 U Ex d e IIC Gb Invólucro em termoplástico
de alta qualidade Enclosure material
High quality thermoplastic Fusível para 1.25 A com terminais
duplos Fuse max. 1.25 A with
double terminals
07-7311-61J2/..20
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 8/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Diodo de recirculação
simples Freewheeling diode
single
07-7311-61GF/54.0
Diodo de recirculação
duplo Freewheeling diode,
double
07-7311-63GF/5300
TÜV 13.1683 U
Módulo de lâmpada de teste
Lamp test diode module
07-7311-97GW/E3K
0
Fuse max. 2.5 A 07-7311-63J2/..00
Fuse max. 6.3 A 07-7311-93J2/..00
Fusível de ação rápida max. 6.3 A
Fuse max. 6.3 A, quick-acting
07-7311-93J2/.F00
Relés e Contatores certificados INMETRO INMETRO certified Relay and Contactor
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Mini relé de contato
Miniature switching relay
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
07-7311-6371/.000
TÜV 13.1677 U Ex d e IIC Gb
Invólucro em termoplástico de alta qualidade
Enclosure material High quality thermoplastic
Relé, 1/2 contatos de
transição Relay, 1
changeover/2 changeover contacts
07-7311-937./.000
Relé de isolação com separação
de contato Isolator relay contact
seperation
07-7311-937./..00
TÜV 13.1677 U UL-BR
14.0256X Ex d e [ia Ga] IIC Gb
Optoacoplador 2 canais
Optocoupler 2-channel
07-7311-93QH/C5M
0
TÜV 13.1677 U UL-BR
14.0255X Relé de potência
Power relay 07-7311-9772/.310 TÜV 13.1677 U Ex d e IIC Gb
Relé Cradle relay
07-7311-977./.100
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 9/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Relé Relay
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
Series 8510/1
UL-BR 14.0142U Ex d e IIC Gb
Invólucro em resina epóxi Material
Enclosure Epoxy resin
Relé de Latching Latching Relay
Series 8510/1
Módulo relé Ex i Ex i Relay module
Series 8510/1
Relé de tempo Time Relay
Series 8510/1
Módulo relé de 4 vias
Relay module max. 4-way
Series 8510/1
Relé contator Contactor Relay
Series 8510/1
Contator 20 A AC 1
Contactor 20 A / AC 1
Series 8510/1
Contator auxiliar para PLC
Auxiliary Contactor for PLC
Series 8510/1
Contator 4 kW / Contatos
principais e max. 4 contatos auxiliares
Contactor 4 kW / 400 V with 3 Main
Contacts and max. 4 Auxiliary Contacts
Series 8510/122
Contator 4 kW / 400 V
Contactor 4 kW / 400 V
Series 8510/141
Contator max. 7.5 kW / 400 V Contactor max. 7.5
kW / 400 V
Series 8510/1
Contator max. 11 kW / 400 V Contactor max. 11
kW / 400 V
Series 8510/1
Contator 25/26 kW / 400 V
Contactor 25/26 kW / 400 V
Series 8510/1
Inversor de partida max. 4
kW / 400 V Reversing Starter max. 4 kW / 400 V
Series 8510/1
Inversor de partida max. 7.5
kW / 400 V Reversing Starter
max. 7.5 kW / 400 V
Series 8510/1
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 10/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Inversor de partida max. 11
kW / 400 V Reversing Starter
max. 11 kW / 400 V
Series 8510/1
Contator max. 4 kW / 400 V com relé thermistor de proteção a
motor Contactor max. 4 kW
/ 400 V with thermistor motor protection relay
Series 8510/1
Dispositivo de proteção contra surto de arraste
Surge Arrester
Series 8510/1
Fontes de alimentação, interruptores e componentes de controle certificados INMETRO
INMETRO certified Power Supply, Switch and Control-Components
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Transformador AC 24 V/500 mA Transformer AC 24
V/500 mA
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
07-7311-97S3/H3N0
TÜV 13.1677 U
Ex d e IIC Gb Invólucro em termoplástico
de alta qualidade Enclosure material
High quality thermoplastic
Conversosr AC/DC
DC 24 V/450 mA AC/DC converter DC
24 V/450 mA
07-7311-97S7/AAM
0
Fonte de alimentação
AC/DC 110 up to 250 V
Power supply unit AC/DC 110 up to 250
V
07-7311-97S9/J..0
Fonte de alimentação DC 24 V/2 A
Power supply unit DC 24 V/2 A
07-7331-1201/0000
UL-BR 13.0397U
Terminal isolador IP 30, 2-polós
Isolator terminal IP 30, 2-pole
07-7311-6131/EE00 TÜV 13.1678 U
(Precisão) Resistors max.
0.8 W (Precision) Resistors
max. 0.8 W
07-7311-61TW/0.00 TÜV 13.1677 U
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 11/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
(Precisão) Resistores max.
1.2 W (Precision) Resistors
max. 1.2 W
07-7311-63TW/.... TÜV 13.1683 U
Amplificador isolador 4 canais
com display Isolator amplifier, 4-channel with display
07-7311-97MT/BA.2
TÜV 13.1683 U UL-BR
14.0254X Ex d e [ia Ga] IIC Gb
Transdutor de medição para
Pt100 galvanicamente
isolado Measuring transducer for Pt100 galvanically
isolated
07-7311-93T5/.350
TÜV 13.1683 U UL-BR
14.0331X
Ex d e [ia Ga] IIC/IIB Gb
Controlador dois pontos
Two-point controller
07-7311-97ER/31.0 TÜV 13.1683 U Ex d e IIC Gb
Fonte de alimentação Ex i
Ex i Power Supply
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
Series 8510
UL-BR 14.0142U
Ex d e IIC Gb
Invólucro em resina epóxi Material
Enclosure Epoxy resin
Terminal isolação Isolating Terminal 8082/1-1- UL-BR
13.0645U
Invólucro em poliamida Enclosure made of polyamide
Unidade de controle com
resistor – 1 kO / 1 W ou
– 10 kO / 1 W Control unit equipped
with resistor – 1 kO / 1 W or – 10 kO / 1 W
Series 8453
UL-BR 14.0328U
Bloco de contato Contact Block
Series 8208
UL-BR 14.0223U
Unidades de
controle, comando e sinalização
Components for signaling and control
NUOVA ASP
Via de Gasperi, 26 I-20090 Pantigliate
– Milano – Italy
GUE*, GUB* e GUBW*
CEPEL 12.2140
Ex d IIC T6...T3 Gb IP66
Ex d [ia/ib] IIC T6 Gb
IP66
Invólucro em liga de alumínio ou aço inoxidável Enclosure made of aluminum alloy
or stainless steel.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 12/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Modex com interface Profibus certificado INMETRO INMETRO certified Modex Profibus-Interface
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
16 saídas digitais 16 x digital out
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
07-7331-2301/0000
UL-BR 13.0397U
Ex d e IIC Gb
Invólucro em termoplástico de alta qualidade
Enclosure material High quality thermoplastic
16 entradas digitais
16 x digital in
07-7331-2302/0000
8 entradas 4 a 20 mA, passivo 8 x 4 to 20 mA in
passive
07-7331-2304/2000
Transmissor de 8 entradas (4 a 20
mA 8 Transmitter in (8 x 4 to 20 mA, Transmitter
in)
07-7331-2304/3000
Relé de 8 saídas 8 x Relay out
07-7331-2308/0000
4 saídas digitais Ex i
8 entradas digitais Ex i (NAMUR)
4 x digital out Ex i/8 x digital in Ex i
(NAMUR)
07-7331-2305/1000 Ex d e [ia Ga] IIC Gb
16 saídas digitais Ex i
16 x digital out Ex i
07-7331-2301/1.00
UL-BR 13.0397U Ex d e [ib] IIC/IIB Gb UL-BR 13.0669X
16 entradas NAMUR (16
entradas digitais Ex i)
16 NAMUR in (16 x digital in Ex i)
07-7331-2303/.000
UL-BR 13.0397U
Ex d e [ia Ga] IIC Gb 4 saídas digitais Ex e
8 entradas digitais Ex i (NAMUR)
4 x digital out Ex e/8 x digital in Ex i
(NAMUR)
07-7331-2305/0000
UL-BR 13.0677X
8 entradas 4 a 20 mA
8 x 4 to 20 mA in
07-7331-2304/0000
UL-BR 13.0397U Ex d e [ia Ga] IIC Gb UL-BR 13.0680X
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 13/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
8 entradas 4 a 20 mA
8 x 4 to 20 mA out
07-7331-2306/.000
UL-BR 13.0397U Ex d e [ia Ga] IIC Gb
UL-BR 13.0681X
4 entradas RTD Ex i
4 x RTD in Ex i
07-7331-2307/0000
UL-BR 13.0397U Ex d e [ia Ga] IIC/IIB
Gb UL-BR 13.0664X
8 relés de saída Ex i
8 x Relay out Ex i
07-7331-2308/1000
UL-BR 13.0397U Ex d e [ia Ga] IIC Gb UL-BR 13.0684X
8 entradas 4 a 20 mA 4
entradas/saídas 4 a 20 mA
8 x 4 to 20 mA in/4 x 4 to 20 mA in/out
07-7331-230H/.0.0
UL-BR 13.0397U
Ex d e [ia Ga] IIC/IIB Gb
8 entradas 4 a 20 mA 4
entradas/saídas 4 a 20 mA
(15 bit plus sign) 8 x 4 to 20 mA in/4 x 4
to 20 mA in/out (15 bit plus sign)
07-7331-230H/.0.1
UL-BR 13.0679X
Acoplador Profibus
Repetidor Profibus
PROFIBUS Coupler / PROFIBUS Repeater
07-7311-9.WP/...0
TÜV 13.1683 U Ex d e [ib] IIC Gb
UL-BR 14.0357
Acoplador RS485/PROFIBU
S LWL Profibus
Acoplador RS485/PROFIBU
S LWL PP RS485/PROFIBUS LWL Ring-coupler RS485/PROFIBUS
LWL PP-coupler
07-7311-97WP/54.0 07-7311-
97WP/60.0
TÜV 13.1683 U UL-BR
14.0356X
Ex d e [ib] IIC Gb Class I Zone 1 IIC Fitting (17-1923-
1122/0000): Ex II (2) G / II (2) D
[Ex ib Gb] IIC [Ex ib Db] IIIC
Optical waveguide, Transmitter (17-2114-
0002): Ex II 2 G / II 2 D
Ex ib op is IIC T4 Gb Ex ib IIIC TX* °C Db Optical waveguide, Receiver (17-2114-
0003): Ex II 2 G / II 2 D Ex ib IIC T4 Gb
Ex ib IIIC TX* °C Db
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 14/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Interface terminal Profibus
PROFIBUS-Interface Terminator
07-7311-93WP/0000 TÜV 13.1683 U Ex d e IIC Gb
Sistema de componentes ANTARES certificados INMETRO
INMETRO certified ANTARES System Components
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Unidade de Controle (RCU)
ANTARES Rail Control Unit (RCU) ANTARES
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
17-5174-1.00 UL BR
13.0241X Ex d e [ib] IIC T4 Gb
Módulo de conexão: PA Módulo superior: alumínio
fundido, PA Enclosure material
Connection module: PA Head module: aluminium die-
casting, PA 17-5164-
9..0 Modulo remoto I/O ANTARES
8DI-N Remote I/O Module ANTARES 8DI-N
17-6143-1002/0000
UL BR 13.0249
Ex ib [ia IIC/IIB Ga] IIC T4 Gb
[Ex ia Da] IIIC Invólucro em PA
Enclosure material: PA
Módulo remoto I/O ANTARES
16DI-N Remote I/O Module ANTARES 16DI-N
17-6143-1008/0000
Módulo remoto I/O ANTARES
8DO Remote I/O Module
ANTARES 8DO
17-6143-1001/0000
UL BR 13.0270 Módulo remoto I/O ANTARES
8DO-SCl Remote I/O Module
ANTARES 8DO-SCL
17-6143-1010/0000
Módulo remoto I/O ANTARES
8AI Remote I/O Module
ANTARES 8AI
17-6143-1004/0000
UL BR 13.0231 Módulo remoto I/O ANTARES
8AIH Remote I/O Module
ANTARES 8AIH
17-6143-1005/0000
Módulo remoto I/O ANTARES
4AIO Remote I/O Module
ANTARES 4AIO
17-6143-1006/0000 UL BR 13.0260
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 15/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Módulo remoto I/O ANTARES
4AIOH Remote I/O Module ANTARES 4AIOH
17-6143-1007/0000
Módulo remoto I/O ANTARES
4TI Remote I/O Module
ANTARES 4TI
17-6143-1003/0000 UL BR 13.0269
HMI Série POLARIS certificados INMETRO
INMETRO certified POLARIS HMI-Serie
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Painel PROFISSIONAL
PROFESSIONAL Panel
BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
17-71V1-90../.000
11/UL-BRHZ-0131X
Ex db eb qb [ib op pr] IIC T4 Ex tb IIIC
T120 °C
Frente: Folha de polyester em alumínio anodizado
(condicionalmente resistente a UV)
Parte traseira: Folha de aço bicromatizada
Front: Polyester foil on anodised aluminium plate (conditionally UV-
resistant) Back: bichromated sheet steel
17-71V1-80../.000 17-71V1-B.../.000 17-71V1-.0../.000 17-71V1-.2../.000 17-71V1-.0../.000 17-71V1-.0../.000 17-71V1-.0.. /.000
POLARIS REMOTO
POLARIS REMOTE
17-71V2-.0..
17-71V1-B436/Z000 17-71V1-
.072/Z000/.200
17-71V-6272/Z000/
.200 17-71V1-
.072/Z000/.200
POLARIS COMFORTO
POLARIS COMFORT
17-71V2-.0..
17-71V1-B436/Z000 17-71V1-80../X000
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 16/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
POLARIS BASICO
POLARIS BASIC
17-71V1-A0 /X000 17-71V1-
10.. 17-71V1-
20.. 17-71V1-
30.. Teclado Keyboard
17-71VZ-40.0
Folha de polyester em alumínio
(condicionalmente resistente a UV)
Polyester foil on aluminium sheet (conditionally UV-resistant)
Mouse 17-71VZ-1000
Controle Trackball, Joystick
17-71VZ-.000
Dispositivo de Toque
Touchpad 17-71VZ-
3000
Terminais certificados INMETRO
INMETRO certified Terminals
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Terminais Terminals
WEIDMÜLLER CONEXEL DO
BRASIL CONEXÕES
ELÉTRICAS LTDA. Rua Garcia Lorca,
176 - Pauliceia 09695-900 - São
Bernardo do Campo - SP -
Brasil CNPJ:
47.160.221/0001-90
AKZ 1,5; AKZ 4; DK 4 EN; DK
4Q EN; DK 4QV EN; SAKD 2,5 EN; SAK 2,5 EN;
SAK 4 EN; SAK 6 EN;
SAK 10 EN;
SAK 16 EN; SAK
35 EN
UL-BR 12.0282U Ex e IIC Material Wemid
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 17/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
WDU 70/95 WDU
120/150 WDU 2,5
WDU 2,5N WDU 4 WDU 6
WDU 10 WDU 16 WDU 35
WDU 50N WDU 70N
WDU 95N/120N
WPE 70/95 WPE
120/150 WPE 2,5
WPE 2,5N WPE 4 WPE 6
WPE 10 WPE 16 WPE 35
WPE 50N WPE 70N
WPE 95N/120N
IEx 13.0147U Ex e IIC Gb
WDU 2.5/TC IEx 13.0239U
Terminais Terminals
PHOENIX CONTACT
Deutschland GmbH & Co. KG
Flachsmarktstr. 8 D-32825 Blomberg
Germany
USLKG Series TÜV 12.1145 U
Ex e IIC Gb Material Isolante PA Insulating material PA
UK 10 N; UK 16N;
UK 35; UK 35-IB; UKH
50; UKH 50-IB and UKH 95
TÜV 12.1146 U
UK 1,5 N; UK 2,5 N;
UK 3 N; UK 5 N and UK
6 N
TÜV 12.1147 U
USLKG 3 (-1) TÜV 12.1148 U
ST 1,5; ST 1,5-TWIN;
ST 1,5-Quattro;
STTB 1,5; ST 1,5-PE;
TÜV 12.1149 U
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 18/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
ST 1,5-TWIN PE;
ST 1,5-Quattro PE; STTB 1,5
PE USLKG 2,5
(-1) and USLKG 6N
(-1)
TÜV 12.1150 U
ST 2,5; ST 2,5-TWIN;
ST 2,5-Quattro;
STTB 2,5 (-PV); ST
2,5-PE; ST 2,5-TWIN-
PE; ST 2,5-Quattro-PE andSTTB
2,5
TÜV 12.1151 U
ST 4; ST 4-TWIN; ST 4-Quattro, STTB 4 (-PV); ST-6;
ST 6-TWIN; ST 4-PE;
ST 4-Quattro-PE;
STTB 4-PE; ST 6-PE and ST 6-TWIN-PE
TÜV 12.1152 U
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 19/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Dispositivos de medição certificados INMETRO INMETRO certified Measuring devices
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Indicador de laço de alimentação 4
a 20 mA Indicador de faixa de alimentação 4
a 20mA 4-20 mA Loop
powered indicators 4-20 mA Loop
powered rate totaliser
BEKA associates Ltd
Old Charlton Road Hitchin,
Hertfordshire SG5 2DA, UK
BA307E
NCC 12.0969 X Ex ia IIC T5 Ga Ex ia IIIC T80 °C Da
Medidor protegido por invólucro plástico
Meter housed within a plastic enclosure
BA308E
BA327E
BA328E
BA358E
8 variáveis Foundation
fieldbus display Eight variable
FOUNDATION™ fieldbus display
BA488CF-F
NCC 12.0833 X Ex ia IIC T4 Ga BA488CF-P
Indicador de laço de alimentação 4
a 20 mA 4-20mA Loop powered
indicator
BA326C NCC 12.0842 Ex ib IIC T5
Bezel para medição de
instrumentos e dispositivos indicadores
Bezel for Measuring Instruments and
Indicating Devices Series
R. STAHL Schaltgeräte
GmbH Am Bahnhof 30
74638 Waldenburg Germany
Series 8603
UL-BR 14.0191U Ex e IIC Gb
Dispositivo em poliamida com janela
Polyamide frame with window
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 20/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Elementos atuadores certificados INMETRO INMETRO certified Actuating Elements
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Interruptor de motor e carga Load and Motor Switch / Control
Switch
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
Series 8006/4
UL-BR 14.0103U Ex d e IIC Gb
Invólucro em resina epóxi Material
Enclosure Epoxy resin
Interruptor de motor e carga Load and Motor
Switches, Load-Break Switches
Series 8544
UL-BR 13.0602U Ex d e IIC Gb
Invólucro em resina epóxi Material
Enclosure Epoxy resin
Interruptor de motor e carga Load and Motor
Switches, Load-Break Switches
Series 8549
UL-BR 14.0166U Ex d e IIC Gb
Invólucro em resina epóxi Material
Enclosure Epoxy resin
Botões de controle
Control Buttons Series 8082
UL-BR 13.0645U Ex d e IIC Gb
Invólucro em poliamida Contato em prata
niquelado, banhado a ouro Enclosure material: Polyamide Contact material: silver-nickel,
gold-plated Lâmpada de LED
indicadora Botões de pressão
iluminados LED Indicating Lamp
Illuminated Pushbuttons
Series 8010, Series
8082/8010
UL-BR 14.0325U
Ex d e IIC Ex d ia/ib IIC
Invólucro e lente em
poliamida Enclosure and Lens material:
Polyamide
Atuadores Actuators
Series 8602/3
UL-BR 14.0326U Ex e IIC Gb Material: Poliamida
Material: Polyamide Potênciometros
Potentiometer Series 8208
UL-BR 14.0223U Ex d e IIC Gb Material: Poliamida
Material: Polyamide Interruptores de
controle Control Switches
Series 8008
UL-BR 14.0076U Ex d e IIC Gb
Invólucro em resina epóxi Enclosure material Epoxy resin
Elementos atuadores
ComEx ComEx Actuating
elements BARTEC GmbH Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
05-0003-00**/****
UL-BR 14.0240U
Ex e IIC Gb / Ex tb IIIC Db
Invólucro em termoplástico Enclosure material
Thermoplastic
Módulo interruptor
ComEx com terminais para instalação em
trilho ComEx Switch module
with terminals for rail-mounted
installation
07-3321-1*00 TÜV 13.1181 U Ex d e IIC Gb
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 21/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Interruptor de controle ComEx
ComEx Control switch 07-3331-
1*0* Módulo
interruptor ComEx flex
ComEx flex Schaltmodul
07-3323-4*00
Módulo interruptor
ComEx com terminais para instalação em
painel ComEx Switch module
with terminals for panel-mounted
installation
07-3323-1*00
Módulo de lâmpada ComEx
com terminais para instalação
em trilho ComEx Lamp module
with terminals for rail-mounted
installation
07-3351-11*0
UL-BR 14.0216U
Botões iluminados
ComEx com terminais para instalação em
trilho ComEx Illuminated
button with terminals
for rail-mounted installation
07-3361-1**0
Módulo de lâmpada flex
ComEx ComEx flex Lamp
module
07-3353-41*0
Botão iluminado flex ComEx
ComEx flex Illuminated button
07-3363-4**0
Módulo de lâmpadas com terminais para instalação em
painel ComEx Lamp module
with terminals for panel-mounted
installation
07-3353-11*0
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 22/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Botão iluminado ComEx com
terminais para instalação em
painel ComEx Illuminated
button with terminals
for panel-mounted installation
07-3363-1**0
Potênciometros ComEx com
terminais para instalação em
trilho ComEx Potentiometer
with terminals for rail-mounted
installation
07-3371-1D*0
UL-BR 14.0133U Potênciometros
ComEx com terminais para instalação em
painel ComEx Potentiometer
with terminals for panel-mounted
installation
07-3373-1D*0
Caixa de junção ComEx flex
ComEx flex Junction box
05-0042-0050
UL-BR 14.0132X
Prensa Cabos, Plugues e Soquetes certificados INMETRO
INMETRO certified Cable glands, Plugs and Sockets
Componente Component
Fabricante Manufacturer
Modelo Type
Certificado Certificate
Tipo de Proteção Protection Type
Material Material
Prensa Cabos Cable gland
Peppers Cable Glands Limited
Stanhope Road, Camberley, Surrey, GU15 3BT United
Kingdom
C R-****, C****E*
NCC_13.2185_X
Ex e II Gb/ Ex ta IIIC Da Ex e IIC Gb / Ex tb IIIC
Db IP66/68 Latão, Aço inoxidável
Brass, Stainless Steel
E****F* NCC_13.2186_X
A*L*F
NCC_13.2012_X
A*LDS*F
A*LCF*F (Conduit)
A8*F
NCC 13.2187 X A8C**F
D8X*F
E8X*F
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 23/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
CR-U**
NCC 13.2188 X
CR-X**
CR-C***
CX-C***
CR*S**
Adaptadores, redutores e
plugues Adaptors /Reducers /
Plugs
AR Series
NCC 13.2189 X
ARMM Series
Metallic Male/Male
ARFF Series
Metallic Female/Fe
male SPMH Series
Metallic Dome
Head Plug SPA / SPB
Series Metallic Plugs SPHH Series
Metallic Hex Head
Plug Drenos de
respiro Breather Drains
ACDP NCC 13.2191 U Ex e IIC Gb / Ex tb IIIC
Db IP66/68 Adaptadores 90⁰ Adaptors - 90 Degree
ARMR & ARMF Series
NCC 13.2190 U
Dreno/Respiro Drain/Breather
NUOVA ASP
Via de Gasperi, 26 I-20090 Pantigliate
– Milano – Italy
V CEPEL 13.2220U
Ex db IIC IP66 Ex eb IIC IP66 Ex tb IIIC IP66
Aço inoxidável AISI 03-304, 316, 316L
Stainless Steel AISI 03-304, 316, 316L
Bujão / Stopping plug PLG CEPEL
13.2218U
Ex db IIC IP66 Ex eb IIC IP66 Ex tb IIIC IP66
Alumínio-silício, código
AL Aluminum silicon, code AL
Alumínio anticorodal
6082, código AL Aluminum anticorodal 6082l,
code AL
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 24/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Aço inoxidável AISI 03-
304, 316, 316L, código X Stainless Steel AISI 03-304, 316,
316L, code X Aço carbono galvanizado,
código AZ Galvanized carbon steel, code AZ
Latão OT58, código OT
Brass OT58, code OT
Prensa-cabo
para cabo não armado
Cable glands for unarmoured cables
PNA*** CEPEL 12.2174X
Ex e IIC Gb IP66/68 (para o tamanho 0) (for size 0) Ex d IIC Gb / Ex e IIC Gb IP66/68 (para os tamanhos de 1 à 8) (for sizes from 1 to 8) Ex tb IIIC Db IP66/68
Latão OT58, Latão niquelado ou zincado, aço
carbono, aço carbono niquelado ou zincado, aço inoxidável AISI 303, 304,
316 ou 316L Brass OT58, nickel or zinc plated
brass, nickel or zinc plated carbon steel, stainless steel AISI
303, 304, 316 or 316L
Prensa-cabo para cabo armado
Cable gland for armoured cables
PA**** CEPEL 12.2176X
Adaptadores / Reduções
Adapters/Reductions
RE, REB, REM e REN
CEPEL 13.2222U
Ex db IIC IP66 Ex eb IIC IP66 Ex tb IIIC IP66
Alumínio-silício, código AL
Aluminum silicon, code AL
Alumínio anticorodal 6082, código AL
Aluminum anticorodal 6082l, code AL
Aço inoxidável AISI 03-304, 316, 316L, código X Stainless Steel AISI 03-304, 316,
316L, code X
Aço carbono galvanizado, código AZ
Galvanized carbon steel, code AZ
Latão OT58, código OT Brass OT58, code OT
Prensa Cabos Cable gland
CMP Products Glasshouse St.
Peters Newcastle-Upon Tyne NE6 1BS United Kingdom
A2F and A2E TUV 12.0619X
Ex e IIC Gb / Ex tb IIIC Db IP66
Latão, Aço inoxidável Brass, Stainless Steel
A2FRC
TÜV 12.0878X A4ERC
A2F-FC
A2F-HC
C** TÜV 12.0617X
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 25/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
E** TÜV 12.0618X
PX** TÜV 12.2073X
SS2K
TÜV 12.0879X SS2KPB
SS2KTA Adaptadores,
redutores Adaptors /Reducers
737 and 797 TÜV 12.1332X
Plugues Plugs
747, 757 and 767 TÜV 12.1333X
Adaptadores, redutores e
plugues Adaptors /Reducers /
Plugs
Ex Innovations Ltd T/A Raxton
Westgate, Aldridge, West Midlands, WS9 8FS, UK.
Exe Adaptors
from Raxton
NCC 12.0764X Ex e IIC Gb / Ex tb IIIC
Db IP66 Latão, Aço inoxidável
Brass, Stainless Steel
Exe Stopping
plugs Exe
Reducers from
Raxton Drenos de
respiro Breather Drains
Exe Breather-
drain plugs NCC 12.0926X
Prensa Cabos Cable gland
Cooper Capri SAS 36-40 Rue des Fontenils- BP6
41600 - Nouan-Le-Fuselier France
ADE-1F2 CEPEL05.0558X
Ex e IIC Gb / Ex tb IIIC Db IP66
Latão, Aço inoxidável Brass, Stainless Steel ADE-4F,
ADE-5F and ADE-
6F
CEPEL05.0559X
Plugues e soquetes
SolconeX & CES Plugs and Sockets SolConeX & CES
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30 74638 Waldenburg
Germany
Series 8570
UL-BR 13.0267X
Ex d e IIC T6 with intriniscally safe
auxiliary contacts: Ex d e [ia] IIC T6
Ex tD A21 IP66 T80°C
Invólucro em poliamida, fibra de vidro reforçada Enclosure material polyamide,
glass fibre reinforced
Series 8571
UL-BR 13.0107X
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 26/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Tamanhos de invólucros (em mm) / Enclosure sizes (in mm) Poliéster / Polyester
Comprimento ou largura length or width
Largura ou Altura width or height
Altura ou Profundidade height or depth
Código Painel de Controle type-code control station
80 75 55 0805
80 75 75 0807
110 75 55 1105
110 75 75 1107
160 75 55 1605
160 75 75 1607
190 75 55 1905
190 75 75 1907
230 75 55 2305
230 75 75 2307
122 120 90 1209
122 120 120 1212
220 120 90 2209
160 160 90 1609
160 160 120 1612
260 160 90 2609
360 160 90 3609
560 160 90 5609
341 170 150 3415
341 170 190 3419
200 250 120 2013
255 250 120 2512
255 250 160 2516
400 250 120 4012
400 250 160 4016
600 250 120 6012
200 300 150 2015
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 27/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
500 300 300 5030
341 341 150 3515
341 341 190 3519
682 341 150 6815
682 341 190 6819
250 350 150 2515
400 400 200 4020
400 405 120 4112
400 405 160 4116
400 600 200 4120
600 600 200 6020
600 800 300 6033
800 1000 300 8130
270 170 136 2713
270 270 136 2813
541 270 136 2913
Tamanhos de invólucros em faixas intermediárias são possíveis Further enclosure sizes in the intermediate range are possible
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 28/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Alumínio / Aluminium
Comprimento ou largura length or width
Largura ou Altura width or height
Altura ou Profundidade height or depth
Código Painel de Controle type-code control station
75 80 57 706
125 80 57 1206
175 80 57 1706
250 80 57 2506
122 120 80 1208
122 120 90 1209
220 120 80 2208
220 120 90 2209
360 120 80 3608
160 160 90 1609
260 160 90 2609
360 160 90 3609
560 160 90 5609
179 179 90 1709
200 230 110 2011
200 230 180 2018
280 230 110 2811
330 230 110 3311
330 230 180 3318
400 230 110 4011
600 230 110 6011
298 248 110 2911
400 310 110 4111
400 310 180 4118
600 310 110 6111
600 310 180 6118
421 329 110 4211 Tamanhos de invólucros em faixas intermediárias são possíveis
Further enclosure sizes in the intermediate range are possible
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 29/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
Aço inoxidável / Stainless Steel
Comprimento ou largura length or width
Largura ou Altura width or height
Altura ou Profundidade height or depth
Código Painel de Controle type-code control station
100* 100 60 1006
200* 100 60 2006
150* 150 100 1510
150 150 160 1516
150* 150 60 1506
150* 150 80 1508
250* 150 100 2510
300* 150 80 3008
350* 150 100 3510
400* 150 80 4008
200 200 160 2016
200 200 200 2020
200* 200 100 2010
200* 200 120 2012
200* 200 80 2008
250 200 110 2511
300 200 160 3119
300 200 200 3120
300* 200 100 3010
300* 200 120 3112
300* 200 80 3108
400* 200 100 4010
400* 200 120 4013
400* 200 160 4015
600* 200 120 6112
847 200 120 8512
260* 260 160 2616
260* 260 200 2620
200* 300 155 2015
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 30/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
300* 300 120 3012
300* 300 160 3016
300* 300 210 3121
380* 300 155 3815
400* 300 160 4115
400 300 300 4030
260* 380 160 2716
260* 380 200 2720
300 380 155 3015
300* 380 210 3021
380* 380 160 3816
380* 380 210 3821
600* 380 210 6022
300* 400 210 3022
400 400 200 4020
400* 400 160 4216
400* 400 210 4021
500* 400 160 5016
600 400 200 6019
600* 400 160 6016
950 400 200 9520
600 450 200 6018
350* 500 160 3516
350* 500 200 3520
400* 500 210 4221
380* 600 210 3822
400* 600 210 4121
600* 600 210 6021
550* 740 160 5516
550* 740 200 5520
600* 760 210 6121
760* 760 300 7630
400 800 250 4025
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 31/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
600 800 300 6033
800* 800 300 8030
640* 860 160 6416
640* 860 200 6420
740* 980 160 7416
740* 980 200 7420
800* 1000 300 8130
600* 1100 250 6025
700 1200 400 7040
800 1200 300 1230
850 1200 400 8540
1000 1200 300 1231
1000* 1200 400 1240
1000 1000 300 1030
700 600 200 7020
600 380 300 6023
400 900 210 4026
400 300 250 4017
500 400 210 5021
700 550 210 7019
1000 1000 210 1021
600 600 300 6027
1000 800 300 1031
760 760 210 7621
850 1000 300 8530
760 820 300 7631
500 750 160 5017
500 750 300 5031
200 400 160 2017
600 380 350 6024
430 400 160 4316
600 380 300 6026
500 650 300 5032
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 32/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
800 400 210 8021
500 400 100 5010
400 400 400 4040
250 130 100 2509
200 100 120 1912
200 120 100 1910
1000 1000 400 1040
120 120 75 1275
140 120 75 1475
180 120 75 1875
220 120 75 2275
650 350 200 6520 500 650 350 5033
260 120 75 2675 360 360 210 3621
650 650 160 6516
400 650 210 4022 500 650 160 5015
760 800 300 7632
800 400 300 8031
600 700 300 6031
800 700 300 8032
400 1000 160 4001
400 600 300 4031
400 1100 160 4117
400 500 160 4516
500 500 210 5020 600 1100 160 6116
600 600 350 6035
560 100 100 5601
550 800 400 5540 900 700 350 9035
400 600 120 4014
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 33/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
800 1200 500 8050
400 400 250 4023
508 762 150 5115
650 950 218 6521 450 400 160 4517
800 750 400 8040
550 600 120 5512 500 350 350 5027
380 300 210 3818
400 300 210 4019
800 800 160 8016
600 760 300 6032
500 650 450 5035
600 400 300 6034
700 550 300 7030
700 230 120 7012
700 650 300 7031
200 350 120 2113
600 400 210 6122
650 650 350 6535 500 280 200 5018
490 500 210 4921 700 900 400 7140
650 500 210 6522 300 700 150 3715
600 600 180 6119
610 600 180 6123
750 800 210 7521
560 320 200 5620
400 450 210 4018
750 800 190 7519
800 1200 400 8048
480 390 165 4816
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 34/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
380 380 155 3814
380 600 300 3830
600 600 250 6028
260 160 75 2775
360 160 75 3675
200 160 75 2075 330 160 75 3375
500 800 350 5036
300 400 200 3023
270 270 100 2710
270 400 100 2740
610 600 300 6130
500 500 300 5037
450 1200 300 4530
1500 1500 350 1535
450 300 200 4520
450 240 150 4515
800 600 210 8022
1000 120 75 1007
450 380 210 4521
650 500 250 6525 450 350 210 4522
500 1100 300 5011
760 600 210 7622
700 550 250 7025
500 590 210 5038
500 500 350 5039
450 240 150 4515
700 650 250 7026 750 900 210 7522
700 700 300 7021
660 760 250 6625
610 914 200 6120
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 35/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
700 600 250 7024
450 350 250 4525
600 380 250 6029
600 450 210 6017
600 350 200 6036
1200 2000 600 1220
600* 1200 300 6030
360 410 250 3625 800 600 300 8033
1000 650 300 1034
600 500 210 6037
1800 1600 600 1860
600 850 450 6038
800 1000 400 8140
635 455 300 6330
730 360 120 7312 600 850 400 6040
500 600 300 5034 600 800 400 6039
200 300 75 2375
350 500 210 3521
400 300 150 4113
600 960 400 6094
800 960 400 8094
600 800 210 6821
260 260 150 2615
400 600 190 4032 300 200 155 3115
200 150 75 2175
600 300 160 6041
200 100 75 1975
400 400 300 4130
570 760 300 5730
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 36/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
250 150 75 2575
200 200 75 2276 600 200 160 6216
750 600 300 7530
900 1000 350 9135
300 500 210 3522
480 480 200 4848
360 180 75 3875
360 180 90 3690
400 150 90 4006
400 150 100 4009
400 900 300 4090
450 700 210 4722
250 600 250 2560
800 1050 200 8010
400 150 75 4075
800 650 300 8034
500 700 250 5025
900 550 300 9055
450 600 210 4523
400 300 165 4365
915 1650 200 9162
200 300 120 2312
750 550 250 7531
950 500 300 9553
950 650 300 9563
950 1150 300 9511
500 400 75 5475
300 380 180 3038
300 760 180 3076
600 760 180 6076
550 700 210 5572
350 250 165 3525
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 37/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
300 300 180 3018
350 230 150 3523
180 380 90 1890
780 340 250 7825
600 400 250 6425
500 500 160 5116
610 915 160 6117
350 450 160 3545
500 350 160 5135
750 360 160 7516 Tamanhos de invólucros em faixas intermediárias são possíveis
Further enclosure sizes in the intermediate range are possible
Para tamanhos intermediários de invólucros fabricados em aço inoxidável, será utilizada a potência de dissipação do menor invólucro imediatamente inferior mencionado nesta lista. Tais invólucros estão destacados com um *. For the potential intermediate sizes of the stainless steel enclosures will be used the power dissipation of the next smaller housing included in the list of the certificate. The listed enclosures are marked with *.
CARACTERÍSTICAS ELÉTRICAS / ELECTRICAL CHARACTERISTICS: Tensão nominal de isolação Rated isolation voltage
Até 1000 V Up to 1000 V
Corrente nominal Rated Current
160 A
Categoria de utilização Utilization category
Depende da montagem dos componentes Dependent on the built in components
Área nominal de seção transversal do condutor Nominal conductor area
120 mm2 máximo Max. 120 mm2
Máxima faixa de temperature ambiente: Maximum ambient temperature range:
-55 °C ≤ Ta ≤ +80 °C -55 °C ≤ Ta ≤ +75 °C (com inserção do invólucro / with enclosure insert)
Grau de proteção IP de acordo com a ABNT NBR IEC 60529 Type of protection according to ABNT NBR IEC 60529
Mínimo IP54 (Gás), Mínimo IP6X (Poeira) Minimum IP54 (Gas), Minimum IP6X (Dust)
Os valores nominais indicados são valores máximos, os valores elétricos reais são determinados após montagem do equipamento elétrico considerando os valores nominais dos diversos componentes utilizados e que atendem os requisitos das normas aplicáveis. O fabricante limita e especifica os valores de acordo com as especificações de alimentação, modo de operação, categoria de utilização, etc. A faixa de temperatura ambiente é determinada de acordo com a faixa de temperatura permitida para os componentes utilizados.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 38/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
A composição da marcação para atmosferas explosivas é baseada no tipo de proteção de cada componente utilizado, ver descrição produto para detalhes. Rated values are maximum values, the actual electrical values are determined by mounted electrical apparatus. Within these limiting values complying with the appropriate standards the manufacturer specifies the final limiting values dependent on power supply specifications, operating mode, utilization category, etc. The actual ambient temperature range is based on the temperature range permitted for the components used. The composition of the protection symbol is based on the types of protection of components actually used, see product description for details.. Notas para instalação e uso : Notes for installation and use: A instalação de componentes com tipo de proteção de Segurança Intrínseca “Ex i” deve ser realizada de tal forma que as distâncias de escoamento e isolação, entre circuitos intrinsecamente e não intrinsecamente seguros atendam os requisitos da norma ABNT NBR IEC 60079-14. Installation of equipment designed to type of protection Intrinsic Safety “Ex i” has to proceed in such a way that the clearance and creepage distances between intrinsically safe and non-intrinsically safe circuits as set forth in ABNT NBR IEC 60079-14 are met. CONDIÇÕES ESPECÍFICAS DE UTILIZAÇÃO PARA EQUIPAMENTOS Ex ou LISTA DE LIMITAÇÕES PARA COMPONENTES Ex: SPECIFIC CONDITIONS OF USE FOR Ex EQUIPMENT or SCHEDULE OF LIMITATIONS FOR Ex COMPONENTS: Nenhuma / None. ENSAIOS DE ROTINA / ROUTINE TESTS: Nenhum / None. OBSERVAÇÕES / OBSERVATIONS: 1. A validade deste Certificado está condicionada à realização das avaliações de manutenção e tratamento de possíveis não
conformidades de acordo com as orientações da UL do Brasil Certificações e previstas nos procedimentos específicos. 2. Este certificado aplica-se aos equipamentos (produtos) idênticos ao protótipo avaliado e certificado, manufaturados na(s) unidade(s)
fabril(is) mencionada(s) neste certificado. 3. Qualquer alteração no produto, incluindo a marcação, invalidará o presente certificado, salvo se o solicitante informar por escrito à
UL do Brasil Certificações sobre esta modificação, a qual procederá à avaliação e decidirá quanto à continuidade da validade do certificado.
4. Os equipamentos devem ser instalados em atendimento ás Normas pertinentes em Instalações Elétricas em Atmosferas
Explosivas, ABNT NBR IEC 60079-14. 5. As atividades de instalação, inspeção, manutenção, reparo, revisão e recuperação dos equipamentos são de responsabilidade dos
usuários e devem ser executadas de acordo com os requisitos das normas técnicas vigentes e com as recomendações do fabricante.
6. É de competência do solicitante estabelecido fora do país notificar o representante legal para fins de comercialização no Brasil, importador ou o próprio usuário sobre as responsabilidades e obrigações prescritas na Cláusula 10 da Portaria 179:2010.
CERTIFICADO DE CONFORMIDADE CERTIFICATE OF CONFORMITY
Certificado No. / Certificate No. UL-BR 11.0118
Página / Page 39/39
Organismo de Certificação / Certification Body
UL do Brasil Certificações Avenida Engenheiro Luis Carlos Berrini, 105 – 24° andar 04571-010 – Brooklin – São Paulo – SP – Brasil
41-IC-F0400 rev. 14.0
1. The validation of this certificate depends on the surveillance inspections conduction and possible non-conformity treatment, according to UL do Brasil Certificações information and specific procedures.
2. This certificate applies to the products that are identical to the prototype investigated, certified and manufactured at the production site(s) mentioned in this
certificate. 3. Any changes made on the product, including marking, will invalidate this certificate unless UL do Brasil Certificações is notified, in written, about the desired
change, who will conduct an analyzes and will decide over the continuity of the certificate validity. 4. The equipment shall be installed according to the relevant Standards in Electrical Installation for Explosive Atmospheres, ABNT NBR IEC 60079-14. 5. The installation, inspection, maintenance, repair, review and rebuild equipment activities are responsibility of the end user and must be performed in accordance
with the requirements of the standards and manufacturer's recommendation. 6. If the applicant is established outside of Brazil it is their responsibility to notify the legal representative for commercial purposes in Brazil, importer or end user of
the responsibilities and obligations described in Clause 10 of Portaria 179:2010. RELATÓRIO DE AVALIAÇÃO, LISTA DE DOCUMENTOS DE CERTIFICAÇÃO* E HISTÓRICO DE REVISÕES / EVALUATION REPORT, CERTIFICATION DOCUMENTATION LIST* AND REVISION HISTORY:
Data de emissão Issue Date
Descrição da revisão Description of revision
Número do projeto Project number
Número da Revisão Revision Number
2017-07-03
Inclusão de equipamentos com certificação INMETRO e atualização do número do certificado, de 11/UL-BRHZ-0118 para UL-BR 11.0118. Addition of INMETRO certified equipment and certificate number update, from 11/UL-BRHZ to UL-BR 11.0118.
4788034708 5
2015-02-13
Atualização do certificado de acordo com as novas revisões das normas utilizadas na certificação do produto, adição de novo local de fabricação e renovação do certificado. Certificate update according to newest standard editions, addition of manufacturer location and certificate renewal.
4786489055.1.1 4
2013-11-12 Correção do número do certificado. Certificate number correction. SR10733128-T001 3
2013-09-13 Atualização do template do certificado com pequenas correções e clarificações no texto. CoC template update with minor changes and clarifications in the text.
SR10347832-T001-5 2
2011-09-21
Correção da marcação, correção da corrente nominal e inclusão da faixa de temperatura ambiente máxima. Correction on the marking, correction on the nominal current and inclusion of the maximum ambient temperature range.
11CA29782-3 1
2011-09-14 Emissão inicial. Initial issue. 11CA29782-3 0
A última revisão substitui e cancela as anteriores The last revision cancel and substitutes the previous ones
* A lista de documentos de certificação encontra-se na documentação confidencial do projeto de referência.
* The certification documentation list is provided on the confidential documentation of the reference project.