certificate el...certificate number: 71-111130 rev.1 annex to enec certificate 71-111130 rev.1 page...
TRANSCRIPT
DEKRA Certification B.V.
j ÆB.T.M. Holtus A.C. SlingerlandManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
CERTIFICATE
Issued to:Applicant:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands
Licensee:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands
Product : Electronic LED driverTrade name(s) : eldoLEDType(s)/model(s) : DUALdrive 1062/M, DUALdrive 1062/S, DUALdrive 1065/M, DUALdrive 1065/S,
ECOdrive 1065/M, ECOdrive 1065/S, ECOdrive 1066/M, ECOdrive 1066/S, ECOdrive 1068/M, ECOdrive 1068/S, SOLOdrive 1065/M, SOLOdrive 1065/S, SOLOdrive 1066/M, SOLOdrive 1066/S, SOLOdrive 1068/M and SOLOdrive 1068/S
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-1:2015, EN 61347-2-13:2014,
EN 61347-2-13:2014/A1:2017, EN 62384:2006 and EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2158357
DEKRA hereby grants the right to use the ENEC certification mark.
The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.
This certificate is issued on 5 February 2020 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 71-111130 REV.1
ANNEX TO ENEC CERTIFICATE 71-111130 REV.1 page 1 of 2
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataProduct : Electronic LED driverTrade name(s) : eldoLEDType(s)/model(s) : DUALdrive 1062/M, DUALdrive 1062/S, DUALdrive 1065/M,
DUALdrive 1065/S, ECOdrive 1065/M, ECOdrive 1065/S, ECOdrive 1066/M, ECOdrive 1066/S, ECOdrive 1068/M, ECOdrive 1068/S, SOLOdrive 1065/M, SOLOdrive 1065/S, SOLOdrive 1066/M, SOLOdrive 1066/S, SOLOdrive 1068/M and SOLOdrive 1068/S
Rated voltage/nature of supply : 120-250 Vac/dcRated frequency : 50-60 Hz; DCRated current : 1,05 AOutput voltage : 60 Vdc max.Output current : 150-1400 mA (settable)Output power : 100 W max.
77 W max. for a channelPower factor : pf: >0,9Ambient temperature range : ta: -20...+50 °CMaximum case temperature : tc: +83 °C - for S version
tc: +85 °C - for M versionDescription : Built-in LED drivers with SELV output.
Product data – type DUALdrive 1062/M and DUALdrive 1062/SDimming protocol : DALI DT8 dimming
Product data – type DUALdrive 1065/M, DUALdrive 1065/S, ECOdrive 1065/M, ECOdrive 1065/S, SOLOdrive 1065/M and SOLOdrive 1065/SDimming protocol : DALI
Product data – type ECOdrive 1066/M, ECOdrive 1066/S, SOLOdrive 1066/M and SOLOdrive 1066/SDimming protocol : 0-10V
Product data – type ECOdrive 1068/M, ECOdrive 1068/S, SOLOdrive 1068/M and SOLOdrive 1068/SDimming protocol : No dimming
TESTS
Test requirementsEN 61347-1:2015EN 61347-2-13:2014EN 61347-2-13:2014/A1:2017EN 62384:2006EN 62384:2006/A1:2009
Test resultThe test results are laid down in DEKRA test file 224371500.
ANNEX TO ENEC CERTIFICATE 71-111130 REV.1 page 2 of 2
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Additional information- Temperature declared thermally protected: 120 °C - Suitable for emergency luminaire acc. to IEC 60598-2-22, excluding high risk task areas.
This certificate replaces certificate No. 71-111130 which we herewith declare invalid.
The list of components is laid down at test report 2243715.50.
ConclusionThe examination proved that all requirements were met.
Factory locationAcuity Brands Lighting de México S de RL de CVAv La Silla #7711, Parque Industrial La Silla67193 Guadalupe, Nuevo Leon, Mexico