certificate no. : la-1993-0067-g issue no. : 31 · 2 setsco services pte ltd certificate no. :...

2

Setsco Services Pte Ltd Certificate No. : LA-1993-0067-G No.18 Teban Garden Crescent (Part 4 of 5) Singapore 608925

Issue No. : 31 Date : 8 April 2016 Page : 1 of 4

FIELD OF TESTING : Mechanical Testing

ITEMS/ MATERIALS/ PRODUCTS TESTED

TESTS/ MEASUREMENT RANGE OF MEASUREMENT

STANDARD METHODS/ TECHNIQUES/ EQUIPMENT

APPROVED SIGNATORY

A. SAFETY PRODUCTS

1. Personal Protective 1. Design ) SS 513: Part 1: 2005, 2013 ) CKM /

Equipment – Safety 2. Sole Construction ) SS 513: Part 2: 2005, 2013 ) CY / MA

Footwear 3. Toe protection, construction ) ) SA

and dimension ) )

4. Impact Resistance ) )

5. Compression Resistance ) )

6. Behaviour of toecaps ) ) 7. Ergonomic features ) )

8. Determination of upper/ ) )

outsole and interlayer bond ) ) Strength ) ) 9. Determination of the ) )

dimensional conformity of ) )

inserts and the penetration ) )

resistance inserts ) )

10. Penetration Resistance ) )

11. Determination of flexing ) )

resistance of outsole ) )

12. Electrical Properties ) )

Resistance of Outsole ) )

a) Conductive footwear ) )

b) Antistatic footwear ) )

13. Determination of ) )

Electrical Resistance ) )

Certificate No. : LA-1993-0067-G Issue No. : 31 (Part 4 of 5) Date : 8 April 2016 Page : 2 of 4




APPROVED SIGNATORY

2. Industrial Safety Helmet 1. Design and construction ) SS 98 : 2005, 2013 ) CKM / 2. Penetration resistance ) ) CY / MA /

3. Flame resistance ) ) SA

4. Chinstrap anchorage ) )

5. Electrical properties ) )

6. Shock absorption / Force ) )

Transmission ) )

7. Lateral deformation ) )

3. Ceiling Fan 1. Mechanical Strength ) SS 360: 1992 ) CKM /

2. Suspension System ) Clause 5.7 ) CY / MA

3. Installation ) SS 360: 1992 ) SA

) Clause 5.7 )

4. LP Gas Canister & 1. Dimensional measurement ) SS 400 : 1997 ) YA / CKM /

Non-refillable Gas 2. Stroke dimensions of canister ) ) CY / MA

Canisters valve ) ) SA

3. Drop test ) )

4. Strength test on valve cap ) )

5. Air-tightness test ) )

6. Pressure resistance test ) )

7. Strength test on stem ) )

8. Repeated-use test ) )

9. Accuracy of filled gas quantity ) )

with respect to marked gas ) )

quantity ) )

10. Pressure in the canister ) )

5. Personal Fall-Arrest

System

i. Full-Body Harnesses 1. Buckle shake test ) SS 528-1 : 2006 ) CKM / 2. Dynamic performance test ) ISO 10333-1: 2000 ) CY / MA 3. Static suspension angle test ) ) SA for class AE FBH ) )





APPROVED SIGNATORY

ii. Lanyard & 1. Dynamic test of energy when ) SS 528-2 : 2006 ) CKM /

Energy Absorbers supplied as component ) ISO 10333-2: 2000 ) CY / MA

2. Dynamic test of FBH with ) ) SA

integral energy absorbers ) )

3. Elevated temperature ) )

conditioning ) )

4. Wet conditioning ) )

5. Cold conditioning ) )

6. Wet and cold conditioning ) )

iii. Connectors with 1. Gate-face resistance test ) SS 528-5 : 2006 ) CKM /

self-closing and self- 2. Gate side load resistance test ) ISO 10333-5: 2001 ) CY / MA locking gates 3. Static strength test ) ) SA

iv. System performance 1. Performance test for A ) SS 528-6 : 2006 ) CKM / (anchor device) + EAL (energy ) ISO 10333-6: 2004 ) CY / MA absorbing lanyard or other ) ) SA lanyard energy absorber ) ) combination) + FBH (full body ) ) harness) type PFAS ) ) (Personal fall arrest system) ) )

Approved Signatories

Mr Yusoof Aynuddin YA

Mr Cheng Kwang Meng CKM

Mr Chen Yu CY

Mr Mohd Azam MA

Mr Au Gei Keong, Sam SA


Note : This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent requirements.

Setsco Services Pte Ltd Certificate No. : LA-1993-0067-G No.18 Teban Garden Crescent (Part 5 of 5) Singapore 608925

Issue No. : 31 Date : 8 April 2016 Page : 1 of 4

FIELD OF TESTING : Mechanical Testing




APPROVED SIGNATORY

A. GLASS 1. Impact Resistance SS 341 : 2001 ) THC / RT

ANSI Z97.1 : 2004 ) AS/NZS 2208 : 1996 (1999) ) BS 6206 : 1981 ) 2. Boil Test SS 341 : 2001 ) THC / RT ANSI Z97.1 : 2004 ) AS 2208 : 1996 (1999) ) 3. Fragmentation Test BS 6206 : 1981 ) THC / OJW / SS 341 : 2001 ) ACT / RT AS/NZS 2208 : 1996 (1999) ) 4. Non-Destructive Photo-Elastic ASTM C 1279 : 2005 ) THC / OJW / Measurement for Surface SS 341 : 2001 ) ACT / RT Compressive Stress using ) Glazing Angle Surface ) Polarimeter ) 5. Thickness SS 341 : 2001 ) OJW / ACT / AS/NZS 2208 : 1996 (1999) ) RT 6. Size Tolerances, Flatness & SS 341 : 2001 ) OJW / ACT / Squareness Rectangular AS/NZS 2208 : 1996 (1999) ) RT Panels ASTM C1048 : 2004

Certificate No. : LA-1993-0067-G Issue No. : 30 (Part 5 of 5) Date : 17 June 2015 Page : 2 of 4




APPROVED SIGNATORY

B. DRY WALL 1. Partition Stiffness – (Applied ) SS 492 : 2001 ) THC / SS

loads (and Deflection – Annex A) ) BS 5234 Pt 2 : 1992 ) ) )

2. Small hard body impact test ) )

(surface damage – Annex B) ) )

) )

3. Large soft body impact test ) )

(Perforation – Annex C) ) )

) )

4. Small hard body impact test ) )

(Perforation – Annex D) ) ) ) ) 5. Large soft body impact test ) )

(surface damage – Annex E) ) )

) )

6. Resistance to crowd pressure ) )

(Annex G) ) )

) )

7. Effects of door slamming(Annex F) ) )

) )

8. Lightweight anchorage pull-out ) )

tests (Annex H) ) )

) )

9. Lightweight anchorage pull- ) ) down tests (Annex J) ) ) ) ) 10. Heavyweight anchorage (wash ) ) Basin) eccentric downward ) ) loading test (Annex K) ) ) ) ) 11. Heavyweight anchorage (high ) ) level wall cupboard) eccentric ) )

downward loading (Annex L) ) )

C. BUILDING 1. Non-combustibility BS 476 Part 4: 1970 THC / SS / JS

MATERIALS BS EN ISO 1182: 2010





APPROVED SIGNATORY

D. INSULATION 1. Thermal Conductivity ASTM C 518: 2010 THC / SS / JS

MATERIALS

E. RUBBER 1. Tensile Strength and Elongation at ASTM D412: 2006a(2013) ) SL

Break ISO 37: 2011 )

DIN 53504: 2009 )

) 2. Shore A & D Hardness ASTM D2240: 2005(2010) )

DIN 53505: 2000 )

)

3. Compression Set ASTM D395: 2003(2008) )

ISO 815 Pt 1: 2008 )

)

4. Tear Resistance ASTM D624: 2000(2012) )

ISO 34-1: 2004 )

) F. PLASTICS 1. Tensile Strength and Elongation at ASTM D638: 2014 ) SL

Break ISO 527 Pt 2: 2012 )

DIN 53455: 1981 )

BS 2782 Pt 3 Method )

320E: 1976 )

)

2. Shore A & D Hardness ASTM D2240: 2005(2010) )

ISO 868: 2003 ) )

3. Izod Impact Resistance ASTM D256: 2010 )

ISO 180: 2000 )

)

4. Compressive Strength ASTM D695: 2010 )

)

5. Barcol Hardness ASTM D2583: 2013a )


1001: 1977 )

6. Flexural Strength ASTM D790: 2010 ) SL


335A: 1993 )

ISO 178: 2010 )





APPROVED SIGNATORY

7. Density ASTM D792: 2013 ) BS 2782 Pt 6 Method )

620A to 620D: 1991 )

ISO 1183 Pt 1: 2012 )

)

8. Shear Strength ASTM D732: 2010 )


340A & 340B: 1978 )

9. Abrasion Resistance CTD/TP/09 -2012 ) )

Approved Signatories

Mr Tan Hong Choon (THC) Mr Aw Chong Tze (ACT)

Mr Raymond Tan (RT) Mr Salim Suwignjo (SS)

Mr Ong John Wei (OJW) Ms Shirley Lim Sui Di (SL)

Mr Jasbeer Singh (JS)

Note : This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent requirements.

certificate no. : la-1993-0067-g issue no. : 31 · 2 setsco services pte ltd certificate no. :...

Documents