certificate of calibration traceable to nist

21

NET 30Terms

Test Equipment section

21

399www.mcmelectronics.com

Amprobe . . . . . . . . . .431B+K Precision . . .421~423Byte Brothers . . . . . . .440EE Tools . . . . . . . . . .441Electronic DesignSpecialists . . . . . . . .429Fluke . . . . . . . . .424~428Fluke Networks . . . . .428Gale . . . . . . . . . . . . .436Gold Line . . . . . . . . .429Holaday . . . . . . . . . .441Holland . . . . . . . . . . .434Hoyt . . . . . . . . . . . . .434Huntron . . . . . . . . . . .436JDSU/Test-Um . . .432~434J.S. Popper . . . . . . . .440

Mueller . . . . . . . . . . .439NTE . . . . . . . . . . . . .440NTI . . . . . . . . . . . . . .429Peak . . . . . . . . . . . . .440Pomona . . . . . . .438, 439Progressive Electronics . . . . . . . .430Psiber Data . . . . . . . .423Simpson . . . . . . . . . .441Tenma . . . . . . . .399~420TPI . . . . . . . . . . . . . .440Triplett . . . . . . . .435, 436Uni-T . . . . . . . . . . . .420Velleman . . . . . . . . . .437Wi-Spy . . . . . . . . . . .441

Test Equipment

Certificate of Calibration Traceable to NIST TENMA offers a certificate of calibration traceable to NIST (National Institute of Standards andTechnology) for most of the Tenma line of test and measurement instruments. Each certificateindicates the standards used in certification, the date of certification and the recommendedrecertification date.

If you are ISO-9000 or QS-9000 certified, certification can help you maintain proper compliancedocumentation of your in-house instrumentation.

NIST Certificate of Calibration is available by adding “C” after the model number when ordering.Please call your MCM account representative for pricing and availability.

150MHz Digital Storage OscilloscopeThis color display DSO has been designed for a wide multitude ofapplications in industrial, education and service applications. For easeof operation the “Autoset” function allows for signal related automaticset-up of measuring parameters. On screen readout and cursorfunctions for voltage, frequency and frequency measurement provide

extraordinary operational convenience. Fifteen different user defined instrument settings can besaved and recalled without restriction. The valuable “Program” mode is able to help users to recordall the necessary measuring steps and replay all steps again. The special “Go-No Go” function isuseful for distinguishing pass or failure conditions. This scope offers the right combination oftriggering control, frequency response, and time base versatility to facilitate measurements in awide range of applications in laboratory as well as in field service use. Other features: •Twochannel 150MHz bandwidth •Sample rate up to 25GS/s ET •125K record length per channel•Large LCD 5.7" color display •Built in learn mode for tracking and training •Built in FFT function•Built in help menu •Six digit frequency counter •Built in GO/NO–GO function for manufacturing•RS-232, USB and printer port interfaces included

SpecificationsVertical system Bandwidth 150MHz

Channels 2Vertical sensitivity 2mV/div - 5V/divRise time <2.3nsInput coupling 1MohmMax. voltage between signals 300V (DC+AC peak) CATII

Signal acquisition Real time sample rate 100MS/s max. on each channelEquivalent sample rate 25GS/s max. on each channelRecord length 125K CH

Horizontal system Time base range 1ns/div to 10s/divTime base accuracy + or - 0.01%

Trigger Trigger source CH-1, CH-2, LINE, EXTMode Auto level, auto, normal, single, TV, time delay,

event delay, edge, pulse widthCoupling AC, DC, HF, LF, Noise reject

X-Y-Mode X- Axis input/Y Axis input CH-1/CH-2 Frequency counter Readout 6 digitControl panel Autoset, save/recall, waveform trace save/recallDimensions/weight 5.6" (H) x 12.2" (W) x 10" (D)/9 lbs.

®® YEAR LIMITED2 WARRANTY

100MHz Oscilloscope with Cursor Readout✔Cursor readout with seven measurement functions ✔6" monochrome CRT displayFeatures: •Dual channel •Dual trace •Dual time base •Delayed sweep •Cursor readout with sevenmeasurement functions (ΔV, ΔV%, ΔdB, ΔT, 1/ΔT, ΔT%, Δθ) •Ten memory front panel settings saveand recall •Front panel set-up lock •End of range audiable alarm •Autorange time base function•6" rectangular CRT with internal graticule •Scale illumination with intensity control •Trace andreadout intensity •16KV acceleration voltage •Display modes: CH-1, CH-2, DUAL, ALT, CHOP,ADD, CH-2 INV •Input coupling: AC/GND/DC •Sweep modes: A, B (delay), ALT, X–Y, X10magnification •Trigger modes: AUTO, NORM, TV •Trigger sources: CH-1, CH-2, LINE, EXT•Trigger hold off •Trigger level lock •TV synchronization •Trigger slope: + or – •Trigger signaloutput •Z axis input for intensity modulation •Power requirements: 100V, 120V, 230VAC, 50/60Hz •Includes two 10:1 probes and owners manual

SpecificationsVertical bandwidth DC coupled: DC~100MHz(-3dB)

AC coupled: 10Hz~100MHz(-3dB)Sensitivity 2mV/div~5V/div (11 steps 1-2-5 sequence)Rise time 3.5nsInput impedance 1MΩ shunted by 25pFMaximum input voltage 400V (DC + AC peak)Horizontal sweep Time base A: 50ns/div~0.5s/div (22 steps 1-2-5 sequence)

Time base B(delay): 50ns/div~50ms/div (19 steps 1-2-5 sequence)Delay time 1µs~5sDimensions/weight 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Order # Description MSRP (ea.)72-6820 100MHz Oscilloscope with Cursor Readout $1200.00 $1025.0072-6820C With Calibration Certificate Call For Pricing

YEAR LIMITED2 WARRANTY

✔Digital storage oscilloscope ✔5.7" color LCD display ✔Six digit frequency counter ✔RS-2323 and USB interfaces

Order # Bandwidth MSRP (ea.)72-7235 150MHz Digital Storage Oscilloscope $1500.00 $1338.0072-7235C With Calibration Certificate Call For Pricing

®®

C53_pg_398-399 8/14/08 12:54 PM Page 399

21

Test Equipmentsection

400 1-800-543-4330Fax 1-800-765-6960

35MHz OscilloscopeFeatures: •Dual channel •Dual trace •6" rectangular CRT with internalgraticule •2KV acceleration voltage •High sensitivity 1mV/div •Displaymodes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling:AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10 magnification•Trigger modes: AUTO, NORM •Trigger sources: CH-1, CH-2, ALT, LINE,EXT •Trigger hold off •Trigger level lock •TV synchronization •Triggerslope: + or – •Z axis input for intensity modulation •Power requirements:100V, 120V, 220V, 230VAC, 50/60Hz •Includes two 10:1 probes and owners manual

SpecificationsVertical bandwidth DC coupled: DC~35MHz(-3dB)

AC coupled: 10Hz~35MHz(-3dB)Sensitivity 5mV/div~5V/div (10 steps 1-2-5 sequence)Rise time 10nsInput impedance 1MΩ shunted by 25pFMaximum input voltage 300V (DC + AC peak)Horizontal sweep Time base: 0.1µs/div~0.5s/div (21 steps 1-2-5 sequence)Dimensions/weight 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Order # Description MSRP (ea.)72-6810 35MHz Oscilloscope $495.00 $473.0072-6810C With Calibration Certificate - Call For Pricing


20MHz Oscilloscope with Function Generator✔Internal 1MHz function generator✔6" monochrome CRT displayFeatures: •Dual channel •Dual trace •Built–in 1MHz function generator with sine, squareand triangle wave output •6" rectangular CRT with internal graticule •2KV accelerationvoltage •High sensitivity 1mV/div •Display modes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling: AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10magnification •Trigger modes: AUTO, NORM, TV–V, TV–H •Trigger sources: CH-1, CH-2,ALT, LINE, EXT •Trigger slope: + or – •Z axis input for intensity modulation •Powerrequirements: 115/230VAC, 50/60Hz •Includes two 10:1 probes and owners manual

SpecificationsVertical bandwidth DC coupled: DC~20MHz (-3dB)

AC coupled: 10Hz~20MHz (-3dB)Sensitivity 5mV/div~5V/div (10 steps 1-2-5 sequence)Rise time 17.5nsInput impedance 1MΩ shunted by 25pFMaximum input voltage 300V (DC + AC peak)Horizontal sweep Time base: 0.2µs/div~0.5s/div (20 steps 1-2-5 sequence)Function generator range 0.1Hz~1MHz (7 steps)Variable range >10:1Output impedance 50ΩOutput voltage 14V p-p max. (open circuit), ±6VDC offsetDimensions/weight 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Order # Description MSRP (ea.)72-6805 20MHz Oscilloscope with Function Generator $520.00 $473.0072-6805C With Calibration Certificate - Call For Pricing


®®

30MHz Oscilloscope with Frequency CounterIn addition to conventional scope functions, this model includes a five digit LCD digital display, showing frequency, voltage and time base of the inputted signal. Additionally, the Auto Time Base function automatically selects the appropriate horizontal time base for waveform display. An internal alarm advises the user when vertical/horizontal setting reaches the min or max boundary.

Other features: •Dual channel •Dual trace •6" high brightness CRT with internal graticule •2KV acceleration voltage •1mV/div vertical sensitivity for small signalmeasurement •Display modes: CH-1, CH-2, Dual, Add, X-Y •Trigger modes: Auto, norm, TV-V, TV-H •Input coupling: AC, DC, GND •Trigger sources: CH-1, CH-2, Alt, line,external •Trigger slope + or - •Z axis input for intensity modulation •Power requirements: 115/230VAC, 60jz/50Hz ±15% •Includes two 10:1 probes and instruction manual

SpecificationsVertical bandwidth 0~20MHz, 1mV/div ≤ 3%

0~7MHz, 2mV/div ≤ 5%Sensitivity 1mV~1V/division selectable in 12 stepsRise time 11.7ns (1mV/div)Input impedance 1MΩMaximum input voltage 300V (DC + AC peak)Horizontal sweep 0.2µSec~0.5Sec/div in 20 steps

Frequency CounterDisplay digits FiveFrequency range 50Hz~30MHzAccuracy ±0.05%Measuring Sensitivity >2divDimensions/weight: 12 1⁄4" (W) x 53⁄4" (H) x 18" (D), 19 lbs.

Order # Description MSRP (ea.)72-6802 30MHz Oscilloscope with Frequency Counter $520.00 $411.0072-6802C With Calibration Certificate - Call For Pricing

®®

21

✔Internal five digit frequency counter ✔6" monochrome CRT display

®®

C53_pg_400-401 8/14/08 12:55 PM Page 400

21

NET 30Terms



20MHz Oscilloscope✔6" monochrome CRT displayFeatures: •Dual channel •Dual trace •6" rectangular CRT with internalgraticule •2KV acceleration voltage •High sensitivity 1mV/div •Displaymodes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling:AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10 magnification•Trigger modes: AUTO, NORM, TV–V, TV–H •Trigger sources: CH-1, CH-2, ALT, LINE, EXT •Trigger slope: + or – •Z axis input for intensitymodulation •Power requirements: 115/230VAC, 50/60Hz •Includes two 10:1 probes and owners manual

SpecificationsVertical bandwidth DC coupled: DC~20MHz (-3dB)

AC coupled: 10Hz~20MHz (-3dB)Sensitivity 5mV/div~5V/div (10 steps 1-2-5 sequence)Rise time 17.5nsInput impedance 1MΩ shunted by 25pFMaximum input voltage 300V (DC + AC peak)Horizontal sweep Time base: 0.2µs/div~0.5s/div

(20 steps 1-2-5 sequence)Dimensions/weight 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Order # Description MSRP (ea.)72-6800 20MHz Oscilloscope $450.00 $407.0072-6800C With Calibration Certificate Call For Pricing

YEAR LIMITED2 WARRANTY®®

60, 100, 200 and 250MHzOscilloscopeProbe KitsFeatures:•X1/X10attenuation (#76-107 is X10 only) •1Mohm (X1) and 10Mohm(X10) input impedance •1.2m cable length •10-35pFcompensation adjustment •Low noise, improvedcompensation •#76-107 includes a readout actuatorpin on the BNC connector •Meets EN61010-2-031CAT I (IEC1010) requirements •600V maximum(DC+AC peak) •Includes accessory kit and storage pouch.

Bandwidth Risetime Specifications (X10 position) (X10 position)76-109 60MHz (-3dB) into 18pF <5.8nsec76-102 100MHz (-3dB) into 16pF <3.5nsec76-105 200MHz (-3dB) into 14pF <1.8nsec76-106, 76-107 250MHz (-3dB) into 14pF <1.4nsec

Order # Description (ea.)76-109 60MHz Oscilloscope Probe Kit $26.9576-102 100MHz Oscilloscope Probe Kit 37.9576-105 200MHz Oscilloscope Probe Kit 47.9576-106 250MHz Oscilloscope Probe Kit 73.9576-107 250MHz Oscilloscope Probe Kit w/RO 63.9576-110 Replacement Sprung Hook 5.59

100MHz OscilloscopeProbe KitFeatures: •InsulatedBNC •Ideal for portableoscilloscope and otherportable instruments•x1/x10 attenuation •1.2m cable length •10~35pFcompensation adjustment •600V maximum input(DC+AC peak) •Meets IEC61010–2–031 CAT I 600Vrequirements •90 day warranty •Includes accessorykit and storage pouch

SpecificationsBandwidth (x10) 100MHz (-3dB) into 16pFRisetime (x10) <3.5nsecInput impedance (x1/x10) 1MΩ/10MΩ

Order # (ea.)76-123 $42.95

®®

I.R. RemoteControl Test PlugCompact plug simply fits onto theBNC socket of an oscilloscope. When an infraredsource, e.g. remote control, is pointed at the unit, the signal waveform can be seen on the oscilloscopescreen. It is ideal for identifying problems with remotecontrols and assisting in complex home automationremote programming. •Dimensions: 0.55" (dia) x 1.57" (L)

Order # MSRP (ea.)72-7507 $29.95 $21.95

Swivel Base BNC AntennaGreat for non-contact test of

RF transmitting products. Connects to frequency counter, spectrum analyzer and other RF test equipment with BNC input. Features: •Swivel base telescopic antenna with BNC connector •24" extended length •1.8MHz~1800MHz frequency range

Order (ea.)72-6601 $12.49

1GHz Spectrum AnalyzerFeatures: •Frequency range of 150KHz~1GHz (useable to 1.15GHz) •Internal audio demodulator with headphone output •Digital phase lock loopdesign •Multifunction 61⁄2 digit LCD display •Two markers for absolute andrelative measurement •Functions: Max hold, average (2~32 traces), freeze,peak search, center markers •9 memory save/recall locations •Power requirements: 100V, 120V, 220V, 230VAC, 50/60Hz •Includes owners manual

SpecificationsFrequency range 150KHz~1GHz (useable to 1.15GHz)Stability ±2 ppm/year aging, ±10 ppm 0~50°CFrequency spans 0, 2KHz~100MHz/div (1-2-5 sequence)Reference level range/accuracy -30dBm~+20dBm/±1dBm at 50MHzNoise floor -95dBm at 30KHz RBWAmplitude accuracy ±1.5 dB typical at 0 dBmInput overload protection +30dBm continuous, ±25VDCInput impedance 50ΩDimensions/weight 121⁄4" (W) x 6" (H) x 18" (D)/19 lbs.

Order # Description MSRP (ea.)72-6696 1GHz Spectrum Analyzer $2400.00 $2163.0072-6696C With Calibration Certificate - Call For Pricing


®®

21

C53_pg_400-401 8/14/08 12:55 PM Page 401


402 1-800-543-4330Fax 1-800-765-6960

True RMS BenchtopDigital Multimeter✔40,000 count LCD display ✔True RMS measurement ✔USB interface and

data logging software ✔AC and battery operation

Ideal for the service bench or lab where high accuracy is important. This unit measures AC/DC voltageand current, resistance, capacitance, frequency, and temperature. It also provides diode and audiblecontinuity test, as well as 4~20mA loop testing. Features: •AC or battery operation •40,000 count, 41/2 digit primary display •Dual 4,000 count, 31/2 digit sub displays •40 segment analog bargraph•Data logging of 9,999 readings •USB and RS-232 serial interfaces •Fused current measurement to10A •AC or AC+DC TRMS measurement •Backlit display •10Mohm input impedance •Ultra sensitive4,000Mohm input impedance on 400mV range •Switchable auto/manual range •Detailed 70 pageinstruction manual •Includes test leads, alligator clip adaptors, temperature probe, RS-232 and USB interface cables and software

Specifications Range AccuracyDC voltage 400mV, 4V, 40V,400V, 1000V ±(0.025%+5)AC voltage 4V, 40V, 400V,1000V ±(0.4% +30)AC bandwidth 100KHz –DC current 40µA, 4000µA,40mA, 400mA, 10A ±(0.1%+15)AC current 40µA, 4000µA,40mA, 400mA, 10A ±(0.7%+15)Resistance 400Ω, 4KΩ, 40KΩ,400KΩ, 4MΩ, 40MΩ ±(0.3%+40)Capacitance 40nF, 400nF, 4µF, 40µF,400µF, 4mF, 40mF ±(1%+20)Temperature -40°C~1000°C ±(1%+30)

-40°F~1832°F ±(1.5%+50)Frequency 40Hz, 400Hz, 4KHz, 40KHz,400KHz, 4MHz, 40MHz, 400MHz ±(0.01%+8)Input impedance 10MΩ (4GΩ on 400mV range) –Dimensions 4" (H) x 9 5/8" (W) x 11 3/4" (D) –

Order# Description MSRP (ea.)72-1020 True RMS Benchtop Digital Multimeter $399.00 $261.0072-1020C With Calibration Certificate Call For Pricing

®®

Benchtop True RMS Multimeter with USB✔6,000 count LCD display ✔True RMS measurement ✔USB interface and data logging software ✔AC and battery operationIdeal for the service bench or in the classroom, this unit measuresAC/DC voltage and current, resistance, capacitance, frequency,transistor hFE and temperature. It also provides diode and audiblecontinuity test. Features: •AC or battery operation •6000 count,33⁄4 digit display •USB and RS-232 serial interfaces •Fused currentmeasurement to 10A •AC or AC+DC TRMS measurement •Backlitdisplay •10Mohm input impedance •Ultra sensitive 3,000Mohminput impedance on 600mV range •Switchable auto/manual range •Detailed 50 page instruction manual •Includes test leads, alligator clip adaptors, temperature probe, RS-232 interface cables and software

Specifications Range AccuracyDC voltage 600mV, 6V, 60V, 600V, 1000V ±(0.3%+1)AC voltage 600mV, 6V, 60V, 600V, 1000V ±(0.5% +2)DC current 60µA, 6mA, 60mA, 600mA, 10A ±(0.5%+1)AC current 60µA, 6mA, 60mA, 600mA, 10A ±(0.8%+2)Resistance 600Ω, 6KΩ, 60KΩ, 600KΩ, 6MΩ, 60MΩ ±(0.5%+1)Capacitance 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF ±(2%+5)Temperature -40°C~1000°C ±(1%+3)

-40°F~1832°F ±(1%+3)Frequency 10Hz~50MHz ±(0.05%+3)Input impedance 10MΩ (3GΩ on 600mV range)Dimensions 41⁄4" (H) x 81⁄2" (W) x 11" (D)Order# Description MSRP (ea.)72-1015 Benchtop True RMS Multimeter with USB $249.00 $188.0072-1015C With Calibration Certificate - Call For Pricing

®®

True RMS Multimeter with USB Interface✔39,999 count display with bargraph ✔Dual secondary displays ✔True-RMS measurement ✔USB interface with data logging software Compact hand held instrument boasts 40,000 count display andoptically isolated USB interface, rivaling features and accuracy ofmany benchtop units. It measures AC/DC voltage, AC/DC current,resistance, capacitance, temperature, frequency and duty cycle.Triple display features 1⁄2" primary digits and dual 1⁄4" secondarydisplays, plus an analog bargraph and numerous on-screen icons.Features: •True RMS measurement •AC+DC measurement•Selectable auto/manual range •Data logging and recall of up to 10,000 internally stored records •Peak hold •Max/min mode

•Relative mode •Data hold •4~20mA current loop measurement•Dual level backlit display •Sleep mode Kit includes: •4' USB cable and software •Standard test leads •Short clip leads for accurate capacitancemeasurement •Alligator clip adaptors •Standard 9V battery •Soft case •Detailed instruction manual

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 1000V ±(0.025%+5)AC voltage 4V, 40V, 400V, 1000V ±(0.4% +30)AC bandwidth 100KHzDC current 400µA, 4000µA, 40mA, 400mA, 10A ±(0.1%+15)AC current 400µA, 4000µA, 40mA, 400mA, 10A ±(0.7%+15)Resistance 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ ±(0.3%+8)Capacitance 40nF, 400nF, 4µF, 40µF, 400µF, 4mF, 40mF ±(1%+20)Temperature -40° C~1000° C ±(1%+30)

-40° F~1832° F ±(1.5%+50)Frequency 40Hz, 400Hz, 4KHz, 40KHz, 400KHz, ±(0.01%+8)

4MHz, 40MHz, 400MHzDuty cycle 10%~90% ±(1%+30)Current loop 4~20mA displays 0~100% ±(1%+50)Input impedance 10MΩ (2.5GΩ on 200mV range)Dimensions 8" (H) x 35⁄8" (W) x 11⁄2" (D)

Order# Description MSRP (ea.)72-7732 True RMS Multimeter with USB Interface $239.95 $189.0072-7732C With Calibration Certificate Call For Pricing

®®

True RMS Multimeter with USB Interface✔19,999 count display with bargraph ✔Dual secondary displays ✔True-RMS measurement ✔USB interface with data logging softwareFull function multimeter offers a variety of ranges for everyservice application, the accuracy of a 19,999 count display, and an optically isolated USB interface. It measures AC/DCvoltage, AC/DC current, resistance, capacitance, temperature,frequency and duty cycle. Triple display features 1⁄2" primarydigits and dual 1⁄4" secondary displays, plus an analog bargraphand numerous on-screen icons. Features: •True RMSmeasurement •AC+DC measurement •Selectable auto/manualrange •Data logging and data recall •Peak hold •Max/min mode •Relative mode •Data hold •4~20mA current loopmeasurement •Dual level backlit display •Sleep mode Kit includes: •4' opto-coupled USB cable •Data logging

software •Standard test leads •Short clip leads for accurate capacitancemeasurement •Alligator clip adaptors •Standard 9V battery •Soft case •Detailed instruction manual

Specifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 1000V ±(0.05%+5)AC voltage 2V, 20V, 200V, 1000V ±(0.6% +40)DC current 200µA, 2000µA, 20mA, 200mA, 10A ±(0.1%+15)AC current 200µA, 2000µA, 20mA, 200mA, 10A ±(1.8%+15)Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ ±(0.4%+20)Capacitance 20nF, 200nF, 2µF, 20µF, 200µF, 2mF, 20mF ±(1.2%+20)Temperature -40°C~1000°C ±(1%+30)

-40°F~1832°F ±(1.5%+50)Frequency 20Hz, 200Hz, 2KHz, 20KHz, 200KHz, 2MHz, 20MHz, 200MHz ±(0.1%+15)Duty cycle 10%~90% ±(1%+30)Current loop 4~20mA displays 0~100% ±(1%+50)Input impedance 10MΩ (2.5GΩ on 200mV range)Dimensions 8" (H) x 35⁄8" (W) x 11⁄2" (D)Order# Description MSRP (ea.)72-7730 Handheld True RMS Multimeter with USB $199.95 $159.0072-7730C With Calibration Certificate Call For Pricing

®®

212

1

C53_pg_402-403 8/14/08 12:56 PM 02

21

NET 30Terms



®®

Autoranging Multimeter with RS-232 ✔5,999 count display ✔Measures °C temperature ✔Measures capacitance ✔RS-232 interface with data logging software High accuracy, 5999 count multimeteroffers a variety of ranges for every serviceapplication, plus an optically isolated RS-232 interface. Rugged overmoldedhousing stands up to the daily rigors of field service use, and large LCD display is easily read from several feetaway. Measures AC/DC voltage, AC/DCcurrent, resistance, capacitance,temperature and frequency. 33⁄4 digit, 5999count backlit display features 3⁄4" digits andnumerous on-screen icons, for easy at-a-glancereading. Features: •Switchable auto/manual range •Diode check•Continuity buzzer •Data hold •Low battery display •Sleep mode•Included standard test leads, plus separate short leads for accuratecapacitance checking •Includes 4' opto-coupled RS-232 cable withfemale DB9 connector and datalogging software •Comes completewith standard 9V battery and owners manual •Meets 600V CATIII,and 1000V CATII standards

Specifications Range AccuracyDC voltage 600mV, 6V, 60V, 600V, 1000V ±(0.5%+3)AC voltage 600mV, 6V, 60V, 600V, 1000V ±(1% +2)DC current 60mA, 600mA, 10A ±(1.2%+3)AC current 60mA, 600mA, 10A ±(2%+5)Resistance 600Ω, 6KΩ, 60KΩ, 600KΩ, 6MΩ, 60MΩ ±(1%+2)Capacitance 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF ±(3%+5)Temperature -40°C~1000°C ±(1%+3)Frequency 6KHz, 60KHz, 600KHz, 6MHz, 60MHz ±(0.05%+3)Input impedance 10MΩDimensions 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)Order# Description MSRP (ea.)72-7750 Autoranging Multimeter with RS-232 $94.95 $72.9572-7750C With Calibration Certificate - Call For Pricing

Autoranging Multimeter with Temperature✔3,999 count display ✔Measures °C temperature ✔Measures capacitanceFull function multimeter offers a variety of ranges for everyservice application, plus Celsius temperature measurement.Rugged overmolded housing stands up to the daily rigors offield service use, and large LCD display is easily read fromseveral feet away. Measures AC/DC voltage, AC/DC current,resistance, capacitance, temperature, frequency and dutycycle. 33⁄4 digit, 3999 count display features 3⁄4" digits andnumerous on-screen icons, for easy at-a-glance reading.Features: •Switchable auto/manual range •Diode check•Continuity buzzer •Data hold •Relative hold •Low batterydisplay •Included standard test leads, plus separate shortleads for accurate capacitance checking •Thermocoupletemperature probe •Comes complete with standard 9Vbattery and owners manual •Meets 600V CATIII, and 1000V CATII standards

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 1000V ±(0.8%+1)AC voltage 4V, 40V, 400V, 750V ±(1% +5)DC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1%+2)AC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1.5%+5)Resistance 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ ±(1%+2)Capacitance 40nF, 400nF, 4µF, 40µF, 100µF ±(3%+5)Temperature -40°C~1000°C ±(1%+3)Frequency 10Hz~10MHz ±(0.1%+3)Duty cycle 0.1%~99.9%Input impedance 10MΩDimensions 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)Order# Description MSRP (ea.)72-7740 Autoranging Multimeter with Temperature $79.95 $62.9572-7740C With Calibration Certificate Call For Pricing

®®

®®

Large Display Multimeter with TemperatureFull function multimeter offers the uniquefeature of on-screen display of correct leadconnection. As various measurement modes areselected, the display changes to clearly identifywhich test probe inputs are to be used. This unitis perfect for the classroom or occasional user. Therugged molded housing uses a specially designedholder to stand up to the daily rigors of fieldservice use, and the large LCD display is easilyread from several feet away. Measures AC/DCvoltage, AC/DC current, resistance, capacitance, temperature and frequency. 31⁄2 digit, 1999 countdisplay features 1" digits for easy at-a-glancereading. Features: •Diode check •Continuitybuzzer •Data hold •Low battery display•Included standard test leads •Comes completewith standard 9V battery and owners manual•Meets 600V CATIII, and 1000V CATII standards

Specifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 1000V ±(0.5%+1)AC voltage 2V, 20V, 200V, 1000V ±(0.8% +3)DC current 2mA, 200mA, 20A ±(0.8%+1)AC current 2mA, 200mA, 20A ±(1%+3)Resistance 200Ω, 2KΩ, 20KΩ, 2MΩ, 20MΩ ±(0.8%+1)Capacitance 2nF, 200nF, 100µF ±(4%+3)Temperature -40°F~1800°F ±(2%+3)Frequency 2KHz, 20KHz ±(1.5%+5)Input impedance 10MΩDimensions 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)Order# Description MSRP (ea.)72-7930 Large Display Multimeter with Temperature $59.95 $47.9572-7930C With Calibration Certificate - Call For Pricing

®®

Autoranging Multimeter with RS-232✔3,999 count display ✔RS-232 interface with data logging software Full function multimeter offers a variety of ranges for every service application, plus providesan optically isolated RS-232 interface. Ruggedovermolded housing stands up to the daily rigors of field service use, and large LCD display is easilyread from several feet away. Measures AC/DCvoltage, AC/DC current, resistance, capacitance,frequency and duty cycle. 33⁄4 digit, 3999 countdisplay features 3⁄4" digits and numerous on-screenicons, for easy at-a-glance reading. Features:•Switchable auto/manual range •Diode check•Continuity buzzer •Data hold •Relative hold•Low battery display •Included standard testleads, plus separate short leads for accuratecapacitance checking •Includes 4' opto-coupled RS-232 cable with female DB9 connector anddatalogging software •Comes complete withstandard 9V battery and owners manual •Meets 600V CATIII, and 1000V CATII standards

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 1000V ±(0.8%+1)AC voltage 4V, 40V, 400V, 750V ±(1% +5)DC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1%+2)AC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1.5%+5)Resistance 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ ±(1%+2)Capacitance 40nF, 400nF, 4µF, 40µF, 100µF ±(3%+5)Frequency 10Hz~10MHz ±(0.1%+3)Duty cycle 0.1%~99.9%Input impedance 10MΩDimensions 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)Order# Description MSRP (ea.)72-7735 Handheld Multimeter with RS-232 $59.95 $47.9572-7735C With Calibration Certificate Call For Pricing

21

C53_pg_402-403 8/14/08 12:56 PM Page 403

21


404 1-800-543-4330Fax 1-800-765-6960

Large Display Digital Multimeter✔1,999 count display ✔Measures capacitance Full function multimeter offers a variety of ranges for everyservice application. Rugged overmolded housing stands up to the daily rigors of field service use, and large backlit LCDdisplay is easily read from several feet away. Measures AC/DCvoltage, AC/DC current, resistance and capacitance. 31⁄2 digit,1999 count display features 7⁄8" digits for easy at–a–glancereading. Features: •Continuity buzzer •Data hold •Full icondisplay •Sleep mode •Low battery display •Included standardtest leads, plus separate short leads for accurate capacitancechecking •Includes standard 9V battery and owners manual•Meets 1000V CATII standards

Specifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 1000V ±(0.5%+1)AC voltage 200mV, 2V, 20V, 200V, 750V ±(0.8% +3)DC current 20µA, 2mA, 200mA, 20A ±(0.8%+1)AC current 200µA, 2mA, 20mA, 200mA, 20A ±(1%+3)Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ, 20MΩ, 200MΩ ±(0.8%+1)Capacitance 2nF, 20nF, 2µF, 100µF ±(4%+3)Input impedance 10MΩDimensions 61⁄2" (H) x 31⁄4" (W) x 11⁄4" (D)Order# Description MSRP (ea.)72-7720 Large Display Digital Multimeter $39.95 $29.9572-7720C With Calibration Certificate Call For Pricing

®®

Large Display Multimeter with Transistor hFE

✔1,999 count display ✔Measures °F temperature ✔Measures transistor hFE and capacitanceFull function multimeter offers a variety of ranges for every service application, including Fahrenheittemperature measurement, capacitance and transistorhFE. Rugged molded housing uses a specially designedholder to stand up to the daily rigors of field service use. The large LCD display is easily read from severalfeet away. Measures AC/DC voltage, AC/DC current,resistance, capacitance, temperature, frequency and duty cycle. 31⁄2" digit, 1999 count display features 3⁄4" digitsfor easy at-a-glance reading. Features: •Diode check•Continuity buzzer •Data hold •Low battery display•Included standard test leads •Comes complete withstandard 9V battery and owners manual •Meets 600VCATII, and 1000V CATI standards

Specifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 1000V ±(0.5%+1)AC voltage 2V, 20V, 200V, 750V ±(0.8% +3)DC current 2mA, 200mA, 20A ±(0.8%+1)AC current 2mA, 200mA, 20A ±(1%+3)Resistance 200Ω, 2KΩ, 20KΩ, 2MΩ, 20MΩ ±(0.8%+10)Capacitance 2nF, 200nF, 20µF ±(4%+3)Temperature -40°F~1800°F ±(2%+8)Frequency 2KHz, 20KHz ±(1.5%+5)Input impedance 10MΩDimensions 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)

Order# Description MSRP (ea.)72-7925 Large Display Multimeter with Transistor hFE $54.95 $41.9572-7925C With Calibration Certificate Call For Pricing

®®

®®

Digital Multimeter with Temperature✔1,999 count display ✔Measures capacitance ✔Measures °F and °C temperatureFull function multimeter offers a variety of rangesfor every service application, including Fahrenheitand Celsius temperature measurement. Ruggedovermolded housing stands up to the daily rigors of field service use, and large backlit LCD display is easily read from several feet away. MeasuresAC/DC voltage, AC/DC current, resistance,capacitance frequency and temperature. 31⁄2digit, 1999 count display features 7⁄8" digits for easyat-a-glance reading. Features: •Continuity buzzer•Data hold •Full icon display •Sleep mode •Lowbattery display •Included standard test leads, plus separate short leads for accurate capacitancechecking •Includes standard 9V battery and

owners manual •Meets 1000V CATII standards

Specifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 1000V ±(0.5%+1)AC voltage 2V, 20V, 200V, 750V ±(0.8% +3)DC current 20mA, 200mA, 20A ±(0.8%+1)AC current 20mA, 200mA, 20A ±(1%+3)Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ, 200MΩ ±(0.8%+1)Capacitance 20nF, 200nF, 2µF, 100µF ±(4%+3)Temperature (°C) -40°C~1000°C ±(1%+3)Temperature (°F) -40°~1832° ±(1%+4)Frequency 2KHz~20KHz ±(1.5%+5)Input impedance 10MΩDimensions 61⁄2" (H) x 31⁄4" (W) x 11⁄4" (D)Order# Description MSRP (ea.)72-7725 Digital Multimeter with Temperature $49.95 $37.9572-7725C With Calibration Certificate Call For Pricing

Compact Digital Multimeter✔1,999 count display ✔Compact palm size ✔Provides square wave output Compact meter features a wide range of measurementcapabilities, and is ergonomically designed to easily fit in the palm of your hand. 31⁄2 digit, 1999 count displaymeasures AC/DC voltage, DC current, ohms and diode check. Features: •Backlit LCD display with 1⁄2" high digits•Square wave output •Continuity buzzer •Protective holster

•Includes test leads, standard 9V battery and owners manual•Meets 600V CATI standards

Specifications Range AccuracyDC voltage 200mV, 2000mV, 20V, 200V, 500V ±(0.5%+2)AC voltage 200V, 500V ±(1.2% +10)DC current 2000µA, 20mA, 200mA, 10A ±(0.8%+2)Resistance 200Ω, 2000Ω, 20KΩ, 200KΩ, 20MΩ, 200MΩ ±(.08%+2)Input impedance 10MΩDimensions 53⁄8" (H) x 3" (W) x 13⁄8" (D)Order# Description MSRP (ea.)72-7770 Compact Digital Multimeter $15.95 $12.6972-7770C With Calibration Certificate Call For Pricing

Compact Digital Multimeter✔3,999 count display ✔Compact palm size ✔Measures transistor hFE

Autoranging meter features a wide range of measurementcapabilities, and is ergonomically designed to easily fit in the palm of your hand. 33⁄4 digit, 3999 count display measuresAC/DC voltage and current, ohms, diode check and transistorhFE. Features: •1⁄2" high LCD digits •Continuity buzzer

•Protective holster •Includes test leads, standard 9V battery and owners manual •Meets 600V CATI standards

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 500V ±(0.8%+1)AC voltage 4V, 40V, 400V, 500V ±(1.2% +3)DC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1%+2)AC current 400µA, 4000µA, 40mA, 400mA, 4A, 10A ±(1.5%+5)Resistance 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ ±(1%+2)Input impedance 10MΩDimensions 53⁄8" (H) x 3" (W) x 13⁄8" (D)Order# Description MSRP (ea.)72-7765 Compact Digital Multimeter $24.95 $19.9572-7765C With Calibration Certificate - Call For Pricing

21

C53_pg_404-405 8/14/08 12:57 PM Page 404

21

NET 30Terms


21


Feature Packed Pocket Multimeter✔3,999 count display ✔Ultra compact pocket size ✔Measures capacitance ✔Includes folding pocket caseFolding calculator style meterincludes functions thoughtimpossible of a unit this size.33⁄4 digit, 3999 count display features 5⁄8" high digits, for easy viewing. Measure AC/DC voltage, resistance, frequencyduty cycle and even capacitance. The meter measures only 3⁄8" thick (excluding folding case) allowing storage virtually anywhere. With permanentlyattached test leads, this unit isCATII rated to 300V. Requires one type CR2032 3V lithium battery (#291-510),which is included. Comes complete with folding carry case and owners manual.

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 500V ±(0.8%+1)AC voltage 4V, 40V, 400V, 500V ±(1.2% +3)Resistance 400Ω, 4KΩ, 40KΩ, 400KΩ, ±(1%+2)

4MΩ, 20MΩCapacitance 4nF, 40nF, 400nF, 4µF, 40µF, 200µF ±(4%+3)Frequency 10Hz~100KHz ±(0.5%+3)Input impedance 10MΩDimensions 43⁄4" (H) x 31⁄4" (W) x 5⁄8" (D), including caseOrder# Description MSRP (ea.)72-7935 Feature Packed Pocket Multimeter $24.95 $19.9572-7935C With Calibration Certificate Call For Pricing

®®


Pen DMM with Logic FunctionFeatures: •Large 33⁄4 digit, 3999 count LCD display •Autoranging with autopolarity •Data hold •Auto power off •TTL logic test •AC and DC voltage andcurrent measurement •Resistance with continuity beeper •Fuse protected current •Meets IEC-1010 safety standards 600V CAT II applications •Includes 9V battery, ground lead, alligator clip, probe tip covers and owners manual

Specifications Range Max Resolution Basic AccuracyDC voltage 4V, 40V, 600V 1mV ±(0.8% + 1 digit)AC voltage 4V, 40V, 600V 1mV ±(1.2% + 3 digits)DC current 40mA~400mA 100µA ±(1.2% + 3 digits)AC current 40mA~400mA 100µA ±(1.2% + 5 digits)Resistance 400Ω, 4KΩ, 40KΩ, 0.1Ω ±(1.0% + 2 digits)

400KΩ, 4MΩ, 40MΩLogic test HI/LO indicatorContinuity test Buzzer below 100ΩDimensions 11⁄8" (W) x 9" (L) x 11⁄2" (H)

Order # Description MSRP (ea.)72-6620 Pen DMM with Logic $39.95 $34.9572-6620C With Calibration Certificate Call For Pricing

®®

Bench Top DC Volt MeterSingle function meter is perfect for a wide variety of applicationsincluding supply voltagemonitoring, educationaland experimental purposes. Features:•Measures from 0.1mV~200.0VDC in four ranges•Large 18mm (0.7") four-digit LCD display •Colorcoded binding post inputs •Auto polarity •Meets CEand IEC 1010 CAT II, 600V standards •Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D) •Requires standard 9V battery (#292-035), not included.

SpecificationsRange Resolution Accuracy200mV 0.1mV ± 0.5% +1 digit2V 0.001V ± 0.8% +1 digit20V 0.01V ± 0.8% +1 digit200V 0.1V ± 0.8% +1 digitInput impedance 20MΩ

Order # Description MSRP (ea.)72-7275 Bench Top $49.95 $37.95

DC Volt Meter72-7275C With Calibration - Call For Pricing

Certificate

®®


Capacitance Decade BoxIdeal for service, prototype and experimental use, this useful tool may beset at any non-polarizedcapacitor value from100pF~11,111µF, in100pF increments. 20individual slide switches allow the user to quicklyand easily select capacitance values. Wave soldered,two layer PC board utilizes high quality 5% tolerancemylar capacitors. Maximum internal residual capacitance is 50pF. Color coded binding posts provide capacitor and ground connections. Passive device requires no power source. Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D).

Order # MSRP (ea.)72-7265 $99.95 $73.95


Resistance Decade BoxIdeal for service, prototype and experimental use, this useful tool may be set at any resistance value from1~11,111,110ohm, in one ohm increments. 28individual slide switches allow the user to quicklyand easily select resistor values. Wave soldered, two layer PC board utilizes high quality 1% tolerance1⁄3W resistors. Maximum stray internal resistance is 1⁄3ohm. Color coded binding posts provide resistor and ground connections. Passive devicerequires no power source. Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D).

Order # MSRP (ea.)72-7270 $89.95 $63.95


Logic Probe with MemoryThis compact and lightweight probe recognizes high, intermediate, and low levelpulses in DTL, TTL, HTL, and CMOS logic circuits. Specifications: •Pulse detector (pulse-LED): High speed pulse train or single events (+ or - transitions)activate 1⁄3 second pulse stretcher •In memory position of pulse/memory switch, first transition lights and latches LED •Detectable pulse width: 50nsec minimum•Input impedance: 100Kohm •Input signal frequency: 10MHz •Input overloadprotection: 100V continuous, 117VAC for less than 30 seconds •Probe power: DC5~15V/25mA~40mA •Probe power protection: 36V maximum with power leadreversal protection •Dimensions: 77⁄8" (L) x 55⁄8" (dia) •90 day warranty

Order # MSRP (ea.)72-190 $29.95 $23.95

®®

50MHz Logic Probe and PulserSimplifies troubleshooting digital circuits by combining a logic probe and pulser inone probe. Specifications: •Operating voltage: 4VDC~18VDC •Maximum inputsignal frequency 50MHz •Input impedance: 120Kohm •TTL: Logic “1” 3.0V .25V,Logic “0” .75V 25V •CMOS: Logic “1” 60% VCC 5%, Logic “0” 15% VCC 5%•Minimum detectable pulse width 10nsec •Pulser: Sync input impedance 1Mohm•Pulse rate: Switchable .5pps or 400pps •Pulse width: 10sec •Dimensions: 83⁄16" (L) x11⁄16" (dia) •90 day warranty

Order # MSRP (1-9)72-500 $39.95 $31.95

®®

C53_pg_404-405 8/14/08 12:58 PM Page 405

21


21

406 1-800-543-4330Fax 1-800-765-6960

Benchtop LCR MeterThis highly precise LCR meter provides 20,000 count accuracy, dual display and discrete force and sense BNC probe inputs, for accurate measurement and sorting of components. Features: •Dual display 20,000 and 1,000 count •Multiple test frequencies •Selectable tolerance modes for sorting•Measurement parameters: L, C, R, D, θ and Q •Auto/manual ranging •0.3% basic accuracy •Parallel/series test modes •Data logging capability•Optically isolated RS-232 interface •Short/open calibration •Complete 48 page theory and instruction manual supplied on disk, or available as free download from the MCM website

Specifications Range Resolution AccuracyResistance 20Ω~10MΩ 0.001Ω~0.001MΩ 100Hz/120Hz/1KHz: ±0.3% + 2 digits

10KHz: ±0.6% + 5 digitsCapacitance 200pF~10mF 0.01pF~0.01mF 100Hz/120Hz/1KHz: ±0.4% + 3 digits

10KHz: ±1% + 5 digitsInductance 2000µH~1000H 0.1µH~0.1H 100Hz/120Hz/1KHz: ±0.3% + 5 digits

10KHz: ±0.6% + 8 digitsDissipation factor .000~999 autoQuality factor .000~999 autoθ Measurement ±90°Test frequencies 100Hz, 120Hz, 1KHz and 10KHzTolerance mode 1%, 5%, 10% and 20%Dimensions 2.80" (H) x 10.25" (W) x 8.31" (D)Order # Description MSRP (ea.)72-1025 Benchtop LCR Meter $399.00 $349.0072-1025C With Calibration Certificate - Call For Pricing72-1026 RS-232 package - 52.9572-1027 SMD Tweezers - 42.95

®®

LCR MeterCompact full featured meter provides inductance,capacitance and resistance (LCR) measurements. Quicklyand accurately measure

capacitance values up to 600µF in seven ranges, resistance to 20MΩ in six ranges and inductance to 20H in five ranges.Features: •31⁄2 digit 1999 count display •Transistor hFE

measurement •Diode test •Audible continuity test •Low batterydisplay •Comes complete with standard 9V battery, test clips andowners manual •See owners manual at www.mcmelectonics.com for detailed accuracy, resolution and test frequency specifications

Specifications Range Accuracy Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ (0.8%+1)Capacitance 2nF, 20nF, 200nF, 2µF, 20µF, 200µF, 600µF (1%+5)Inductance 2mH, 20mH, 200mH, 2H, 20HDimensions 6.77" (H) x 3.27" (W) x 1.50" (D)Order# Description MSRP (ea.)72-8155 LCR Meter $69.95 $52.9572-8155C With Calibration Certificate Call For Pricing

®®

Capacitance MeterCompact meter is ideal for capacitor measurement in service and assemblyapplications. Quickly andaccurately measure capacitance

values up to 20mF (20,000µF), in nine ranges, and resistance to2,000MΩ in nine ranges. Features: •31⁄2 digit 1999 count display•Transistor hFE measurement •Diode test •Audible continuity test •Low battery display •Comes complete with standard 9Vbattery, test clips and owners manual •See owners manual atwww.mcmelectronics.com for detailed accuracy, resolution and test frequency specifications

Specifications Range Accuracy Resistance 20Ω, 200Ω, 2KΩ, 20KΩ, 200KΩ, (0.8%+1)

2MΩ, 20MΩ, 200MΩ, 2,000MΩCapacitance 200pF, 2nF, 20nF, 200nF, 2µF, 20µF, (1%+2)

200µF, 2mF, 20mFDimensions 6.77" (H) x 3.27" (W) x 1.50" (D)Order# Description MSRP (ea.)72-8150 Capacitance Meter $42.95 $31.9572-8150C With Calibration Certificate Call For Pricing

®®

Deluxe Analog Display VOMPerfect for educationalpurposes or in applicationswhere unstable readingsmake digital displays inconvenient. MeasuresAC/DC voltage, DCcurrent, resistance,temperature, decibels,continuity, identifies PNPand NPN transistors andtests batteries under a

load. Features: •Large three-color mirrored scale•Carry handle that doubles as a stand •Continuitybuzzer •Includes test leads and instruction manual•Requires one 9V and two “AA” batteries (included)

Specifications Range AccuracyDC voltage 600mV, 3V, 12V, 60V, 300V ±3% of full scale

1000V ±5% of full scaleAC voltage 12V, 30V, 120V, 600V, ±4% of full scale

1000V ±5% of full scaleDC current 120µA, 3mA, 30mA, 300mA ±3% of full scale

10A ±5% of full scaleResistance X1Ω, x100Ω, x1KΩ, x10KΩ ±3% of arcBattery test 1.5V @ 300mA, 9V @ 30mAContinuity Audible indication <100ΩInput impedance 20KΩ/V (DC), 9KΩ/V (AC)Dimensions 6.7" (H) x 4.9" (W) x 1.9" (D)Order# MSRP (ea.)72-8170 $39.95 $94.95

Analog Display VOMPerfect for educational purposesor in applications where unstablereadings make digital displays

inconvenient. This unitmeasures AC/DC voltage,DC current, resistance,

decibels, and tests batteriesunder a load. Features: •Large three-

color mirrored scale •Included protectiverubber holster •Attached test leads and instruction

manual •Requires one “AA” battery (included)

Specifications Range AccuracyDC voltage 2.5V, 10V, 50V, 250V, 500V ±5% of full scaleAC voltage 10V, 50V, 500V ±5% of full scaleDC current 500µA, 10mA, 250mA ±5% of full scaleResistance x10Ω, x1KΩ ±5% of arcBattery test 1.5V @ 125mA, 9V @ 10mAInput impedance 2KΩ/VDimensions 6.1" (H) x 3.5" (W) x 1.9" (D)Order# MSRP (ea.)72-8175 $17.95 $11.59

®®

®®

Analog Display VOMPerfect for educational purposes or in applications

where unstable readings make digital displaysinconvenient. This unitmeasures AC/DC voltage,DC current, resistance and decibels. Features:•Large three-color mirrored

scale •Resistancemeasurement in fiveranges for increased

accuracy •Includedprotective rubber holster

•Attached test leads and instruction manual •Requires one “AA” and one

9V battery (included)

Specifications Range AccuracyDC voltage 2.5V, 10V, 50V, 250V, 500V ±3% of full scaleAC voltage 50V, 250V, 500V ±4% of full scaleDC current 50µA, 5mA, 500mA ±3% of full scaleResistance x1Ω, x10Ω, x100Ω, ±3% of arc

x1KΩ, x10KΩInput impedance 2KΩ/V(DC)Input impedance 4KΩ/V(AC)Dimensions 6.1” (H) x 3.5” (W) x 1.9” (D)Order# MSRP (ea.)72-8180 $22.95 $16.95

®®

✔1,999 count display ✔Seven capacitance ranges to 600µF ✔Six resistance ranges to 20MΩ✔Five inductance ranges to 20H

✔1,999 count display ✔Nine capacitance ranges to 20,000µF ✔Nine resistance ranges to 2,000MΩ✔Transistor hFE measurement

C53_pg_406-407 8/14/08 12:58 PM Page 406

21

NET 30Terms



Compact True RMS Clamp Meter ✔5,999 count display ✔True RMS measurement ✔AC/DC current measurementPerfect for applications where higher accuracy is critical. Features: •Backlit display •AC surge currentmeasurement •10MΩ input impedance •Diode test•Continuity buzzer •Max hold •Data hold •Full icondisplay •Sleep mode •Low battery indicator •Includeszipper case, test leads, owners manual •Requires one 9V battery (#292-035), included

Specifications Range AccuracyDC voltage 6.6V, 66V, 600V ±(0.8% +1)AC voltage 6.6V, 66V, 600V ±(1.2% +5)DC current 66A, 1000A ±(1.5% +8)AC current 66A, 1000A ±(2% +8)Resistance 660Ω, 6.6KΩ, 66KΩ,

660KΩ, 6.6MΩ, 66MΩ ±(1% +2)Frequency 660Hz~66MHz ±(0.1% +3)Duty cycle 0.1~99.9%Order # Description MSRP (ea.)72-7228 Compact True RMS $149.00 $105.00

Clamp Meter72-7228C With Calibration - Call For Pricing

Certificate

®®

Compact True RMS Clamp Meter ✔3,999 count display ✔True RMS measurement ✔AC/DC current measurementPerfect for general purpose applications. Features: •10MΩinput impedance •1" clamp diameter •Relative mode •Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zippercase, test leads, owners manual •Requires one 9V battery (#292-035), included

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, ±(0.8% +1)

400V, 600VAC voltage 4V, 40V, 400V, 600V ±(1% +5)DC current 40A, 400A ±(2% +3)AC current 40A, 400A ±(2.5% +5)Resistance 400Ω, 4KΩ, 40KΩ, ±(1% +2)

400KΩ, 4MΩ, 40MΩFrequency 10Hz ~ 100MHz ±(0.1% +3)Duty cycle 0.1 ~ 99.9%TRMS AC voltage frequency 40Hz ~ 400HzTRMS AC current frequency 50Hz ~ 60HzOrder # Description MSRP (ea.)72-7226 Compact True RMS Clamp Meter $119.00 $84.9572-7226C With Calibration Certificate - Call For Pricing

®®

Compact Clamp Meter with Frequency✔3,999 count display ✔AC/DC current measurementPerfect for general purpose applications. Features: •10MΩ input impedance •1" clampdiameter •Relative mode •Diode test •Continuitybuzzer •Max hold •Data hold •Full icon display•Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires one 9V battery (#292-035), included

Specifications Range AccuracyDC voltage 400mV, 4V, 40V, 400V, 600V ±(0.8% +1)AC voltage 4V, 40V, 400V, 600V ±(1% +5)DC current 40A, 400A ±(2% +3)AC current 40A, 400A ±(2.5% +5)Resistance 400Ω, 4KΩ, 40KΩ, ±(1% +2)

400KΩ, 4MΩ, 40MΩFrequency 10Hz ~ 100MHz ±(0.1% +3)Duty cycle 0.1 ~ 99.9%Order # Description MSRP (ea.)72-7224 Compact Clamp $89.00 $63.95

Meter with Frequency72-7224C With Calibration Certificate - Call For Pricing

®®

Compact Clamp Meter with Temperature✔1,999 count display ✔AC current measurementPerfect for general purpose applications including HVAC andappliance repair, this compact clamp meter measures AC/DCvoltage, AC current, resistance and temperature. Features:•1999 count autoranging display •10MΩ input impedance•Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires two “AAA”batteries (#292-025), includedSpecifications Range AccuracyDC voltage 200mV, 2V, 20V, 200V, 600V ±(0.8% +1)AC voltage 2V, 20V, 200V, 600V ±(1.2% +5)AC current 2A, 20A, 200A, 400A ±(1.5% +5)Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ ±(1% +2)Temperature (°C) -40° ~ +1000°C ±(1% +3)Temperature (°F) -40° ~ +1832°F ±(1% +6)Order # Description MSRP (ea.)72-7222 Compact Clamp Meter w/Temperature $59.00 $37.9572-7222C With Calibration Certificate - Call For Pricing

®®

Deluxe Computer PowerSupply TesterThe Tenma ATXPower Supply Testeris designed toprovide fast convenient verification of proper operation of both 20 pin and 24 pin ATX style computer power supplies. Features:•Provides simulated motherboard “ON” condition, with load •LEDindication of power supply operation •Voltage measurement of all 14 pins on the main motherboard connector •Measurement of allapplicable pins on the peripheral, floppy, Serial ATA and P4processor connectors •Bi-directional analog meter shows negativeand positive measurement •Rugged steel housing with non-skidrubber feet •Compact size, only 11⁄2" (H) x 9" (W) x 4" (D) •Calibrated-15~0~15VDC analog meter •On/off rocker switch with LEDindicator •Detailed instructions included

Order # MSRP (ea.)72-1086 $49.95 $41.50

®®

Computer ATX PowerSupply TesterObtain quick verification ofproper operation of ATX style computer power supplies. Simply connect the Tenma computer powersupply tester to the ATX supply’s 20 pin connector,and slide the testers rocker switch to the ON position. The tester applies the proper current load and simulates the ON command from the motherboard, and provides LED verification of proper operation. Further verification can be obtainedby measuring the pin voltage using a standard DMM(not included). Features: •Compact size, only 3⁄4" (H) x13⁄8" (W) x 33⁄4" (L) •Rugged metal housing •6" leadbetween connector and tester housing •Convenienttest points for +3.3V, +12.0V, – 5.0V and + 5.0V measurement •On/off rocker switch with LED•Complete instructions included

Order # MSRP (1–3) (4–up)72-1082 $19.95 $13.69 $12.39

LightedTest LeadIdeal wheninadequatelightingcreates a difficult or unsafeservice environment. Highbrightness red LED lights the immediatetest probe area, and is controlled by amomentary pushbutton switch. Red testlead is sold individually, and is intendedfor use with devices existing black (–) lead.Features: •36" PVC jacketed lead •Fullyinsulated IEC1010 4mm banana plug•Compatible with all Tenma DMM models#72-7720~72-7770, and most others •Meets 1000V Cat II requirements •10Arating •Includes two LR41 type batteries

Order # (1–3) (4–up)72-7775 $7.95 $6.95

®®

21

®®

C53_pg_406-407 8/14/08 12:59 PM Page 407

21


21

408 1-800-543-4330Fax 1-800-765-6960

Digital SpeakerImpedanceMeterActive device is essential for reliableinstallation of backgroundmusic and paging systems inresidences, officesbuildings andpublic areas. Avoid costlyservice calls andamplifier damageby verifying actualspeaker systemimpedance prior tooperation. Unlikeconventionalvolt/ohm meters,

which measure DC resistance, this unit utilizes an internal1KHz oscillator to measure true impedance.Accurately measure speaker lines that utilize impedance matching volume controls, switchers, transformers and passive crossovers. Because this unitaccurately measures up to 2Kohm, it may also be utilized with 25V, 50V, 70V, and 100Vspeaker line transformers in commercialinstallations (information included in themanual). Large digital display features 1"characters for easy viewing. Rotary selectorprovides x1 (0~20Ω), x10 (0~200Ω) and x100(0~2KΩ) scales. Rugged, double insulated case is CATIII rated for use up to 100V.Dimensions: 8" (H) x 31⁄2" (W) x 21⁄4" (D).Includes test leads, carry case and owners manual. Requires six “AA” batteries (#292-015), not included.

Order # Description MSRP (ea.)72-6947 Digital Speaker $299.00 $209.00

Impedance Meter72-6947C With Calibration - Call For Pricing

Certificate

®®

Speaker Measurement Interface

The Tenma SMI is essential for design, refurbishing or DIY speaker building. This compact interface is powered directly from the USB port of most PCs, including laptops, and provide full T/S parameters of the connected speaker. Simply connect to anunmounted driver, and in a few minutes, this devicewill provide Fs, Cms, Qts, Vas, BL, Re, Le, Mms andCMS measurements, as well as an impedance curveand more. Measurements can be performed in mostany shop or home, no special microphones or testingarea is required. Features: •Real time continuousphase and impedance meter •True current sourcedrive (not an approximation) •Continuouslyadjustable 1Hz~20KHz line output •Measureresistors, inductors, capacitors, test leads, cables andmore •Interface dimensions: 21⁄2" (H) x 21⁄2" (W) x 1" (D)

Order # MSRP (ea.)72-850 $189.00 $159.00

®®

®®

Digital Sound Level MeterFeatures: •A and C weighting•35~130dB measurement •2 ranges •Meets IEC 651 type 2 standards •RS-232 datainterface •31⁄2 digit LCD display•1⁄2" condenser microphone•Fast and slow dynamicresponse •Over and underrange indicator •Maximumlevel hold •Internal oscillatorfor calibration •AC and DCsignal output •Includesowners manual, 9V battery,carrying case, wind screenand adjustment screwdriver

SpecificationsRange 35~90dB (low), 75~130dB (high)Resolution 0.1dBFrequency range 30Hz~8KHzAccuracy ±2.0dB at 1KHz (94dB level)AC output 0.65V RMS corresponding to each range step DC output 10mV/dB nominalDimensions/weight 25⁄8" (W) x 91⁄2" (L) x 1" (H)/8 oz.

Order # Description MSRP (ea.)72-860A Digital Sound Level Meter $159.00 $121.0072-860AC With Calibration Certificate - Call For Pricing



Digital Sound Level MeterFeatures: •A weighting•35~130dB measurement •3 ranges •Meets IEC651 type 2 standards •31⁄2 digit LCD display•Fast (200msec.)response •Over andunder range indicator•Data hold •Includesowners manual•Requires 9V battery not included (#292-035)

Specifications:Range 35~80dB/50~100dB/80~130dBResolution 0.1dBAccuracy (at 23° ±5°C) ±1.5dB at 1KHz (94dB level)Dimensions/weight 27⁄8" (W) x 9" (L) x 11⁄8" (H)/8.8 oz.

Order # Description MSRP (ea.)72-6635 Digital Sound $179.00 $131.00

Level Meter72-6635C With Calibration - Call For Pricing

Certificate

Sound Level Meter CalibratorSpecifically intended for Tenma #72-6635 and #72-860 Sound LevelMeters, this precision calibrator is compatible with any instrumentwith a 1⁄2" diameter mic element housing. Essential for maintaining theaccuracy of any portable sound level meter, this unit generates a precise1KHz tone, at exactly 94dB. Single slide switch provides on/off/batterytest functions. Housed in a rugged, die–cast aluminum alloy housing.Requires two 9V alkaline batteries (#292-015), not included. Includescarry case and owners manual.

Order # MSRP (ea.)72-7260 $329.00 $249.00

®®

®®

Semiconductor TesterThis low cost portable semiconductor testerprovides in or out of circuit testing on transistors,FETs, SCRs and diodes. Features: •Auto base orgate identifier •Tests: Transistors, FETs, SCRsand diodes •Identifies: NPN/PNP transistor, N-channel/P-channel FETs, silicon/germaniumdiodes •Continuity test: Audio tone General:•Power requirements: AC adaptor supplied; 9Vbattery not included (#292-035) •Dimensions: 33⁄4" (W) x 13⁄8" (H) x 63⁄4" (D) •Weight: 1 lb.•Replacement AC adaptor available (#28-2790)

Order # Description MSRP (ea.)72-965 Semiconductor Tester $149.00 $101.0028-2790 Replacement AC adaptor - 4.99

®®

SpecificationsFrequency 1000Hz ±5%SPL 94dB ±0.8dBTHD <2.0%Dimensions 2" (dia.) x 3.2" (L)

SpecificationsTest cycle Four quadrantsMaximum load 15ΩAudio tone Indicates less than 20ΩDimensions 33⁄4" (W) x 13⁄8" (H) x 63⁄4" (D)Weight 1 lb.

C53_pg_408-409 8/14/08 1:00 PM Page 408

21

NET 30Terms



Insulation TesterFeatures: •Easy to read 1999 count digital display •Widemeasuring range •Built-in over range and low battery indication•Overload protection on all ranges •Sensitive 0~200ohm rangefor measuring low resistance circuits •Automatic zero adjust andcircuit discharge •Includes owners manual and alligator clips•Requires eight 1.5V “AA” batteries (#292-015) not included

SpecificationsRange Resolution Accuracy200MΩ (500V) 0.1MΩ ±(3% + 1 digit)1000MΩ (1000V) 1MΩ ±(3% + 1 digit)200Ω 0.1Ω ±(1% + 1 digit)Order # MSRP (ea.)72-6782 $199.00 $149.00

®®

®®

Non-ContactInfraredThermometers #72-820✔12:1 distance to spot ratio ✔Measures 0°F~1000°F / -18°C~550°C ✔Adjustable emissivity

#72-823✔20:1 distance to spot ratio ✔Measures -25°F~1200°F /-32°C~650°C ✔Adjustable emissivitySimply point the unit and squeeze thetrigger to provide fast, accurate surfacetemperature measurement. Attachedlaser pointer provides immediateverification of aim Features: •°C/°Fmeasurement •Backlit four digit display•Temperature data hold •MAX/MIN/DIF/AVGtemperature display •Tripod mount •Sleep modeSpecifications: •Display resolution: 0.1 •Displayaccuracy: ±1.8° or ±2% •Repeatability: ±0.5° or ±0.5% •Response time: 250mS •Spectral response:8µm~14µm •Display hold: 8 seconds •Emissivity:Digitally adjustable from 0.10~1.0 by 0.01 •Requiresone 9V battery (#292-035), included

Model 72-820 72-823Range (°F) 0°~1000° -25°~1200°Range (°C) -18°~550° -32°~650°Distance/spot ratio 12:1 20:1Order # Description MSRP (ea.)72-820 Non-Contact $149.00 $73.95

Infrared Thermometer72-820C With Calibration Certificate - Call For Pricing72-823 Non-Contact - 99.95

Infrared Thermometer72-823C With Calibration Certificate - Call For Pricing

Dual Input DigitalThermometer with USB Interface✔Accepts type K, J, T, and E thermocouples✔Data logging up to 100 recordsCompact hand held thermometer is ideal for a variety of industrial,residential, HVAC and equipment testing applications. It accepts industry standard Type K, J, T and E thermocouple probes and featuresinternal data logging of up to 100 records. Dual inputs allow simultaneousmeasurement of two separate zones with independent readout of differential(T1-T2) display Features: •°C/°F/Kmeasurement •Backlit four digit display•Data hold •MAX/MIN/DIF/AVG display•Sleep mode •Includes one K type beadprobe, USB cable software •Requires one9V battery (#292-035), included

®®SpecificationsThermocouple Input RangeK Type -200°C ~ 1372°C

-200°F ~ 1372°FJ Type -210°C ~ 1200°C

-346°F ~ 2192°FT Type -210°C ~ 1200°C

-346°F ~ 2192°FE Type -150°C ~ 1000°C

-238°F ~ 1832°FResolution≤999.9° 0.1°≥1000° 1°Accuracy 0.5% ±0.8°CDimensions 6.9" (H) x 3.3" (W) x 1.2" (D)Order # Description MSRP (ea.)72-7712 Dual Input Digital $139.00 $85.00

Thermometer with USB Interface72-7712C With Calibration - Call For

Certificate Pricing

Dual Input DigitalThermometer with USB Interface✔Accepts type K, J, T, E, R, S

and N thermocouples✔User definable high/low alarms✔User self calibration✔Data logging up to 100 recordsCompact hand held thermometer is ideal for a variety of industrial,residential, HVAC and equipment testingapplications. It accepts industry standardthermocouple probes and features internaldata logging of up to 100 records. Dualinputs allow simultaneous measurementof two separate zones with independentreadout of differential (T1-T2) displayFeatures: •User definable HI/LO alarms •User self calibration •°C/°F/Kmeasurement •Backlit four digit display•Data hold •MAX/MIN/DIF/AVG display•Sleep mode •Includes one K type beadprobe, USB cable software •Requires one9V battery (#292-035), included

SpecificationsThermocouple Input Temperature Range AccuracyK Type -200°C ~ 1372°C 0.2% ±0.6°C

-200°F ~ 1372°FJ Type -210°C ~ 1200°C 0.2% ±0.6°C

-346°F ~ 2192°FT Type -210°C ~ 1200°C 0.2% ±0.6°C

-346°F ~ 2192°FE Type -150°C ~ 1000°C 0.2% ±0.6°C

-238°F ~ 1832°FR Type 0.0°C ~ 1767°C 0.2% ±2°C

32°F ~ 3212°FS Type 0.0°C ~ 1767°C 0.2% ±2°C

32°F ~ 3212°FN Type -200°C ~ 1300°C 0.2% ±1.5°C

-328°F ~ 2372°FResolution≤999.9° 0.1°≥1000° 1°Dimensions 6.9" (H) x 3.3" (W) x 1.2" (D)Order # Description MSRP (ea.)72-7715 Dual Input Digital $149.00 $99.95

Thermometer with USB Interface72-7715C With Calibration - Call For

Certificate Pricing

®®

Temperature Probes and AccessoriesType K thermocouple temperature probes are commonly used with all types ofindustrial temperature controls and measurement equipment, and are compatiblewith Tenma hand held thermometers and digital multimeters that include temperature function. All are terminated with standard type K plugs. #72-8368transition adaptor converts any type K thermocouple to multimeters banana inputs.#72-8370 type K extension cable provides 3m additional length, multiple extensionsmay be added together. See chart below for temperature range, complete details onthe MCM website.

Fig. Order # Type Overall Dimensions Max Temperature MSRP (1-3) (4-up)A 72-8360 Air/gas 12.5" (L) x 3⁄8" (dia) 1112°F / 600°C $99.95 $49.95 $47.95B 72-8362 Immersion 8.5" (L) x 1⁄8" (dia) 1112°F / 600°C 49.95 24.95 23.95C 72-8364 Surface 5.75" (L) x 1⁄2" (dia) 752°F / 400°C 79.95 34.95 33.49D 72-8366 Bead type 1m lead wire 392°F / 200°C 12.95 6.99 6.69E 72-8368 Transition plug 10.95 5.99 5.75F 72-8370 3m extension 39.95 18.95 18.19

®®

A B C

D FE

GFCI/Polarity AC Socket TesterSimple, easy-to-use tester providesinstant verification of correct wiringand provides GFCI trip rating testof standard 110VAC outlets. ThreeLEDs instantly illustrate thefollowing: •Correct wiring•Hot/neutral reverse •Hot/groundreverse •Missing neutral •Missingground •Missing hot. Rotaryselector switch tests GFCI tripcurrent of 10, 15, 20, 25, 30 and35mA. Attached 12" cord is terminated with a 15A molded plug.Housing dimensions: 31⁄4" (H) x 21⁄4" (W) x 13⁄8" (D).

Order # MSRP (ea.)72-6791 $19.95 $14.95

®®

21

C53_pg_408-409 8/14/08 1:00 PM Page 409


21

1-800-543-4330Fax 1-800-765-6960

Television/CATV Signal Level MeterFully portable, compact signal level meter isessential when installing CATV or off–air antennasystems. Easily verify proper signal level of anychannel, at each drop throughout a structure. FMdemodulator and internal speaker provide audiooutput of measured channel. Compact ergonomic unit is less than 9" tall, and is easily held in one hand.Features: •Direct channel input of off–air channels 2~69 and CATV channels 2~136 •Direct frequency inputfrom 5~870MHz •Simultaneously displays video carrierand audio carrier strength •Selectable dBmV and dBµVunits •Spectrum scan and channel scan modes •Tiltmeasurement of seven user definable channels•Carrier/noise ratio measurement •Trunk voltagemeasurement •Self recalibration •Large 11⁄2" x 21⁄4" dotmatrix LCD display •Data logging •RS-232C port with serial print function •Internal NiMH battery with includedwall charger •Includes carry case, carry strap and manual•Battery life: 5~8 hours

Order # Description MSRP (ea.)72-805 Television/CATV Signal Level Meter $750.00 $613.0072-805C With Calibrated Certificate - Call For Pricing

®®

HDTV Multi Media Pattern Generator The Tenma #72-7985A video test pattern generator is theideal low cost solution for installation, calibration andservicing of virtually all of today’s high–resolution displaydevices. Compact unit provides DVI, PC (VGA throughSXGA), and HDTV Component Video (Y/Pb/Pr) outputs,and with the addition of a separately available adaptorcable, it is also compatible with monitors utilizing HDMIinputs. This unit features 28 static and dynamic video testpatterns specially designed for testing, calibrating, andtroubleshooting high–end video gear and A/V installations.In addition standard PC resolutions and refresh rates (upto SXGA at 85Hz), it is capable of providing HDTV outputs from 480p to 1080i bothin DVI digital and in Y/Pb/Pr formats. On screen display indicates output resolutionand refresh rate settings. Simple three–button operation easily selects scan/refreshrate and pattern. Features: •PC output resolutions from 640 x 480 to 1280 x 1024(VGA, SVGA, XGA, SXGA) •HDTV output resolutions from 480p to 1080p (480i,576i, 480p, 567p, 720p, 1080p) •Simple, intuitive push–button on screen menucontrol •Highly portable EMI shielded enclosure •Included cables for connection to DVI, VGA, and component video monitors •Complete manual and sample testpatterns are available on www.mcmelectronics.com Order # Description (ea.)72-7985A Pattern generator $650.0024-9645 6' DVI to HDMI cable 42.9524-9650 10' DVI to HDMI cable 49.95

®®

Test and Measurement DVD SetFeature–packed two–disk set includes everything needed for audio video set-up of standard and high definition hometheater systems. Allows easy setting of audio levels, picturealignment, brightness and color levels. Features: •500 testpatterns for 4:3 and 16:9 formats •700 test tones in severalsound formats including 96KHz/24 bit •48KHz/24 bit •Dolby Digital •DTS •Sample sound effects in multiple audio formats •High definition video presentation loop •Filmtrailer in various multi channel formats •42 page instructionmanual encompasses virtually every aspect of DVDtechnology •Custom manufactured in Germany by Burosch

Audio–Video–Technik, for exclusive distribution in North America by Tenma TestEquipment. Some audio portions of this DVD are in spoken German, overdubbed inEnglish. For NTSC format players only.

Order # MSRP (ea.)72-7509 $69.95 $47.95

®®

1.3GHz Hand Held Frequency CounterFeatures: •Large eight digit LCD display withannunciators •5Hz~1.3GHz frequency range •High sensitivity •Reciprocal counting techniquefor superior accuracy •Measures frequency andperiod •Selectable gate time (0.1sec, 1sec, 10sec)•Hold function •Selectable low pass filter •Push-to-measure function with auto power-down •Requires one 9V battery not included (#292-035)

SpecificationsChannel A: Range 5Hz~25MHzSensitivity 15mV RMS (10Hz~20MHz)Resolution 10-7Hz~10HzChannel B: Range 20MHz~1.3GHzSensitivity 10mV RMS (20MHz~700MHz), 50mV RMS (700MHz~1.3GHz)Resolution 1Hz~1KHzInput impedance CH-A: 1MΩ, CH-B: 50ΩPeriod frequency range 5Hz~25MHzTime base/max aging rate 10MHz crystal/±5ppm/yrDimensions/weight 3.2" (W) x 7" (L) x 1.2" (D)/7 oz.

Order # Description MSRP (ea.)72-6605 1.3GHz Frequency Counter $249.00 $215.0072-6605C With Calibrated Certificate - Call For Pricing


®®

SpecificationsFrequency range (A): 100KHz~300KHz

(B): 300KHz~1000KHz(C): 1MHz~3.2MHz(D): 3.0MHz~10MHz(E): 10MHz~30MHz(F): 32MHz~150MHz(up to 450MHz on third-harmonics)

Frequency accuracy ±3%RF output 100mV RMS, approximately (up to 35MHz)Modulation Internal: 1KHz

External: 50Hz~20KHz, at less than 1V RMSDimensions/weight 10" (W) x 6" (H) x 51⁄4" (D)/7 lbs.


®®

RF GeneratorFeatures: •High stability •Wide frequencyrange: 100KHz~450MHz •Built-in 1KHzoscillator •External crystal input •Powerrequirements: 110V, 220VAC, 50/60Hz

Order # MSRP (1-9) (10-up)RF Generator72-585 $279.00 $163.00 $151.00With Calibration Certificate72-585C - Call For Pricing

21

410

C53_pg_410-411 8/14/08 1:01 PM Page 410

21

NET 30Terms


21


HDMI Cable TesterQuickly troubleshoot and verify HDTV installationswith this compact device. This tester provides DC continuity test on all active HDMI pins bysequentially testing each data path. The tester features two HDMI connections, allowing easy testing of preassembled connections, plus includes a remote module for easy testing from remote areas.LED indicators provide independent test of each of the following nine signal paths: •TDMS red •TDMSgreen •TDMS blue •TDMS clock •CEC •SCL clock•SDA data •+5V •Hot plug detect. Test paths aresequentially tested automatically, or may be manuallyselected. LED indication is provided on the main testunit, as well as the remote module. All connections areHDMI female type. Requires standard 9V battery(#292-035), not included.

Order # MSRP (ea.)72-847 $99.95 $63.95

®®

®®

Multi-Network and Modular Cable TesterThe Tenma Multi-Network and Modular Cable Tester easily reads the correct pin configuration of 10Base-T cable (Cat 5), 10Base-2 cable (coax), RJ-45/RJ-11 modular cables, 356A, TIA-568A/568Band Token Ring cable by comparing transmitting endto the corresponding receiving end. Features: •Easyverification of cable continuity, open, short andmiswiring •Remote terminator tests installed cablesup to 1000' away •Grounding test •Auto or manualscanning of pin-outs •Includes two BNC adaptorcables, BNC male/male adaptor, RJ-45 modular cable,carrying case and owners manual •Requires 9Vbattery not included (#292-035)

Order # MSRP (ea.)72-6706 $109.00 $89.95


Tone Test KitThe Tenma tone test kit is built of high impactplastic to withstand most troubleshootingapplications. It is ideal to help identify the termination point of wires or to trace their paths.The tone generator includes polarity, continuityand 1KHz warble or solid tone emission. Inaddition, a hanging strap has been added to avoidundue strain on leads supporting the unit. Theinductive amplifier offers features such as wristwrap, low battery light and buttset connectionswith weather cover. Also, it is crushproof up to4000 lbs. “Try this with another probe.” Kit contains: •Tone generator, inductiveamplifier and carrying case

Order # MSRP (kit)72-6068 $149.00 $105.07

Available separately

Order # Description (ea.)72-6065 Tone generator $29.7572-6067 Carrying case 15.95


Test TelephoneDesigned for installation professionals who require hard wired communicationsat remote locations or line testing. Can be used for two-way communications andprovides all test functions normally required for standard lines. Meets or exceedsBS6301, BS6305, BS6317, BS2011, BS6527 for Class B radiated RF emissions,S1710 for conducted and radiated RF susceptibility and IEC801-2 forelectrostatic discharge. Features: •DTMF/pulse dailing •Ten digits (6x3 format)with -, #, mem store, mem recall and mute •Polarity LED test •Talk/monitorswitch •High impedance monitor mode •Ten number speed dial memory •Flash (DIS) button •Audible ring indication •Mute button •Redial button

Specifications:Monitor impedance >50KΩPulse dialing 10pps, break/make ratio 2:1, IDP=800msDTMF dialing Tone on: 100ms minimum, level: (both tones)

-11~9dBm, pre-emphasis on high tone: +2dBm ±1dBmDimensions/weight 31⁄2" (W) x 31⁄4" (H) x 11" (D)/1 lb.

Order # MSRP (ea.)72-6069A $229.00 $179.00


Non Contact AC Voltage Detector Auto ranging pocket tester provides audio and visualverification of the presence of high voltages. Simplyhold the non-conductive plastic tip near AC outlets,wiring, power cords, or circuit breakers, and the unitwill provide instant verification of the presence of voltage. Features: •Beeper and flashing LEDindicators •Silent mode •30 minute auto power-offSpecifications: •Voltage range: 90~1000VAC•Frequency range: 50~60Hz •Power requirements:two “AAA” batteries •Overall length: 6"

Order # MSRP (1-3) (4-up)72-750 $19.95 $12.95 $10.50

®®

Compact Continuity TesterUseful tool helps identify wiring problems in home,automotive and other electrical wiring. Simple deviceincorporates a small 1.5V lamp and “AAA” battery,(#292-025, not included) test wiring, connectors,switches, relays and other contacts. 2' wire lead isterminated with a fully–insulated alligator clip, andtest probe includes a sharp, insulation piercing point,for convenience. Note: Not for use on live circuits.

Order # (1–3) (4–9) (10–up)72-7280 $1.99 $1.59 $1.49

®®

Metal/Power/Stud SensorFeatures: •Electronically locates hidden cable, gas,and water pipes •Traces hidden ceiling joists andwall studs •Helps to prevent accidents when drillingor sawing •Audible and visual indication of voltage

Order # (ea.)72-6792 $22.00

®® Universal Voltage TesterA simple low cost voltage tester designed to detect voltages between 6~400VAC/DC. Features:•Integral finger guard for added safety •LED visualindication •Polarity display •Indicated voltages: ±6Vwith polarity display •GS/TUV/CE safety approved

Order # (ea.)72-6793 $15.00

®®

®®

C53_pg_410-411 8/14/08 1:02 PM Page 411

21


21

412 1-800-543-4330Fax 1-800-765-6960


®®

Audio GeneratorFeatures: •Low distortion10Hz~1MHz audio generator in five range steps •Sine and squarewave output •Variable amplitude•Output attenuator (-10dB, -20dB, -30dB, -40dB, -50dB) •600ohm output impedance •External syncinput •Power requirements: 100V,120V, 220V, 240VAC, 50/60Hz•Includes owners manual, test leads and power cord

SpecificationsGenerator frequency 10Hz~1MHz, ±0.5dB (600Ω load)Sine wave output 7V RMS (no load)Distortion ≤0.1% (400Hz~20KHz) x100 range

≤0.3% (100Hz~100KHz) x10 rangeSquare wave output 10V p-p (no load)Rise/fall time ≤200nsecOvershoot <2%Dimensions/weight 51⁄2" (W) x 73⁄4" (H) x 10" (D)/7.7 lbs.

Order # Description MSRP (ea.)72-455A Audio Generator $299.00 $205.0072-455AC With Calibration Certificate - Call For Pricing

15MHz Sweep Function Generator with CounterFeatures: •Provides 0.01Hz~15KHz output in seven steps •Built-in 50MHz frequency counter with five digit display •Sine, triangle, square, DC and sync output •Frequency, symmetry, linear sweep, DC offset and amplitude function •AM, FM, and EXT. modulation •10MHz crystal time base with ±10PPM accuracy•Output attenuator: 20dB/40dB/60dB •Linear sweep mode •Power requirements:100/120/220/240VAC, 50/60Hz •Includes owners manual and detachable IEC typepower cord

SpecificationsGenerator frequency 0.01Hz~15MHz in seven range stepsOutput amplitude Adjustable, 10V p-p, @50ΩSweep rate 5mS~5.0SSweep ratio 1:1 ~ 1:100Variable DC offset ±10V, open circuitSelectable attenuation 20dB/40dB/60dBDimensions/weight 2.8" (H) x 10.3" (W) x 8.3" (D)/6.6 lbs.Order# Description MSRP (ea.)72-7650 15MHz Sweep Function Generator with Counter $599.00 $514.0072-7650C With Calibration Certificate - Call For Pricing

®®

5MHz Sweep Function Generator with CounterFeatures: •Provides 0.01Hz~5MHz output in eight steps •Built-in 50MHz frequency counter with four digit display •Sine, triangle, square, DC and sync output •Frequency, symmetry, linear sweep, DC offset and amplitude function•10MHz crystal time base with ±10PPM accuracy •Output attenuator: 20dB•Linear sweep mode •Power requirements: 100/120/220/240VAC, 50/60Hz •Includes owners manual and detachable IEC type power cord

SpecificationsGenerator frequency 0.01Hz~5MHz in eight range stepsOutput amplitude Adjustable, 10V p-p, @50ΩSweep rate 10mS~5.0SSweep ratio 1:1 ~ 1:100Variable DC offset ±10V, open circuitDimensions/weight 2.8" (H) x 10.3" (W) x 8.3" (D)/3.5 lbs.Order # Description MSRP (ea.)72-7210 5MHz Sweep Function Generator with Counter $349.00 $305.0072-7210C With Calibration Certificate - Call For Pricing

®®

20MHz Function GeneratorFeatures: •20MHz dial set •0.2Hz~20MHzfrequency range •Sine, square, and trianglewaveforms plus DC •10mV~20V p–p from 50W •DC offset control •Variable symmetry control•External sweep input

SpecificationsFrequency range 0.2Hz~20MHzMaximum O/C level 20V p–pInput impedance 82KΩOutput impedance 50ΩSweep range >20:1Maximum input voltage ±10VPower requirements 120VAC, 60HzDimensions 3.2 x 8.6 x 9.0Weight 3.3 lbs.

Order # Description MSRP (ea.)72-6859 20MHz Function Generator $449.00 $371.0072-6859C With Calibration Certificate - Call For Pricing

®®

10MHz Pulse GeneratorFeatures: •0.1Hz~10MHz frequency range •Independent control of pulse delay •50ns minimum pulse width •Square wave, double pulse, and delayed pulse •Free–run, gated, and triggered modes •TTL/CMOS and sync outputs •Two switch setting for outputs: 0.1~1.0V and 1.0~10V with a rise/fall time of 10ns into 50ohm •Load: 15ns maximum

SpecificationsPeriod 100ns~10ns (10MHz~.01Hz)Pulse width 50ns~5sDelay 50ns~5sFrequency range DC to MHzSignal range TTL ThresholdMinimum pulse width .30nsInput impedance 10KΩDimensions 5.5" (H) x 8.6"(W) x 9.0"(D)Weight 3.5 lbs.

Order # Description MSRP (ea.)72-6860 10MHz Pulse Generator $399.00 $314.0072-6860C With Calibration Certificate - Call For Pricing

®®

C53_pg_412-413 8/14/08 1:03 PM Page 412

21

NET 30Terms



Compact Audio GeneratorHighly versatile audio generator is perfect for sound system and speaker component testing. Its highprecision and remote VCO input make it suitable forthe serious test environment, yet its compact size andlow cost make it suitable for any tool box. Features:•Rotary frequency adjustment •Independent sine and square wave outputs, each with their own levelcontrol •VCO input for remote frequency setting •1⁄4" unbalanced outputs •Selectable 0dB/10dB output attenuator Specifications: •Frequency range: 20Hz~20KHz ±1dB •VCO input: 1.2~5.0VDCfor full frequency output •Output level: +11dB (sine),+14dB (square) •Output impedance: 100ohm •THD(sine wave): 1% •Power requirements: 12~16VDC,50mA, AC adaptor included •Dimensions: 1.57" (H) x 4.49" (W) x 2.87" (D)

Order # MSRP (ea.)72-490 $79.95 $59.95

Back®®

®®

Hand Held AudioGeneratorFeatures: •Widefrequency range •Sine andsquare wave output •Syncoutput •Variable amplitude•Output attenuator (-20dB)•600ohm output impedance•Low battery indicator•Includes owners manual,9V battery and test leads

SpecificationsGenerator frequency 20Hz~150KHz in 46 steps, ±0.5dBSine wave output 1.2V RMS (no load)Distortion ≤0.05% (200Hz~15KHz)

≤0.1% (50Hz~30KHz)≤0.3% (20Hz~100KHz)

Square wave output 8V p-p max. (no load)Rise/fall time ≤0.5µsecOvershoot <2%Dimensions 33⁄8" (W) x 6" (H) x 1" (D)

Order # Description MSRP (ea.)72-505 Hand Held Audio Generator $79.95 $58.9572-505C With Calibration Certificate - Call For Pricing


CompactTest/ToneGeneratorCompacttone generatoris great for generaltest andtroubleshootingof virtually anyaudio installationincluding automotive, residential and distributed commercial systems. Line level audio output is high enough to drive home theater, autosound and prosound inputs, and speakerlevel output delivers over 1W signal. Dual frequenciesenhance use with all types of speaker systems.Features: •6" heavy-duty 18AWG speaker leads withinsulated alligator clips •6" pigtail with female RCAL/R line output connections •Portable 9V batteryoperation •LED power indicator Specifications:•Line output: 500mV •Speaker output: 3V •Test frequencies: 200Hz/1KHz, sine wave •Power requirements: 9V battery (#292-035), not included•Dimensions: 4.13" (H) x 2.31" (W) x 1" (D)

Order # MSRP (1-9)72-815 $39.95 $31.95

®®

Standard and Programmable Power SuppliesFeatures: •CV and CI operation with automatic crossover •High resolution setting •Low noise •Excellenttransient response •Remote sense terminals •Programmable models feature nonvolatile storage of 25 settings,watts display, GPIB, RS–232 port, and keypad •Standard models have rotary controls

SpecificationsRipple and noise ≤1mV RMSLoad regulation <0.01% for a 90% load changeLine regulation <0.01% for a 10% line voltage changePower requirements 120VAC, 60HzDimensions 5.2" (H) x 8.3" (W) x 13.8" (D)

#72-6851#72-6850

Output Output Order # Description Voltage Current MSRP (ea.)72-6850 Standard 0~35VDC 0~10A $999.00 $761.0072-6850C With Calibration Certificate Call For Pricing72-6851 Programmable 0~35VDC 0~10A 1500.00 1360.0072-6851C With Calibration Certificate Call For Pricing72-6852 Standard 0~18VDC 0~20A 1050.00 798.0072-6852C With Calibration Certificate Call For Pricing72-6853 Programmable 0~18VDC 0~20A 1250.00 1066.0072-6853C With Calibration Certificate Call For Pricing

®®

Dual Output Power SupplyFeatures: •Dual isolated outputs, 175W maximum each •High resolution setting •Compact and lightweight•Variable overload protection trip •Low noise •Excellenttransient response •Power flex design gives variablevoltage and current combinations ranging from0~35VDC, 0~10A •Compact and lightweight

SpecificationsRipple and noise ≤2mV RMSLoad regulation <0.01% for a 90% load changeLine regulation <0.01% for a 10% line voltage changePower requirements 120VAC, 60HzDimensions 5.2" (H) x 8.3" (W) x 13.8" (D)

Order # Description MSRP (ea.)72-6854 Dual Output Power Supply $1100.00 $863.0072-6854C With Calibration Certificate - Call For Pricing

®®

Quad Output 3 Amp Power SupplyFeatures: •Quad independent DC output •Four LEDdisplay with 3 digits, selectable for two sets outputvoltage and current display simultaneously •Autoseries, parallel, and tracking operation •Low rippleand noise •Overload and reverse polarity protection•Selectable for continuous/dynamic load •Outputenable/disable control •Power requirements:100V,120V, 220V, 240V, 50/60Hz •Includes test leads, power cord and owners manual

CH1 CH2 CH3 CH4Voltage O~30V O~30V 3~6V 8~15VCurrent 0~3A 0~3A 1A Fixed 1A Fixed

CH1/CH2 CH3/CH4Line regulation ≤0.01%+3mV ≤5mVLoad regulation ≤0.01%+3mV ≤10mVRipple & noise ≤1mV RMS ≤2mV RMS

5Hz~1MHz 5Hz~1MHz

Order # Description MSRP (ea.)72-6905 Quad Output 3 Amp $499.00 $411.00

Power Supply72-6905C With Calibration Certificate - Call For Pricing

®®


21

C53_pg_412-413 8/14/08 1:03 PM Page 413

21


21

414 1-800-543-4330Fax 1-800-765-6960

Switch Mode Laboratory DC Power SuppliesPrecision adjustable suppliesare ideal for test, measurementand service applications wheretight voltage and currentregulation are critical. Highlyefficient switch mode designdelivers outstandingperformance from an extremelycompact footprint. Uniqueseparate output ON/OFF control allows voltage and current setting, with the supplyoutput turned off. Features: •Backlit four digit LCD display •Simultaneous display ofvoltage and current •Auto selecting constant voltage (CV) and constant current (CC)modes •Ultra quiet convection cooling •Short circuit, overload, over voltage andthermal protection •84% efficiency at maximum output •RoHs compliant

Model 72-8340 72-8345 72-8350Voltage range 1.0 ~ 60.0VDC 1.0 ~ 36.0VDC 1.0 ~ 20.0VDCCurrent range 0~1.6A 0~3A 0~5AVoltage regulation

Load (from 10~100%) 50mV 50mV 70mVLine (from 90~132VAC) 20mV 20mV 20mVRipple and noise (rms) 5mV 5mV 5mVRipple and noise (p-p) 50mV 30mV 30mV

Current regulationLoad (from 10~100%) 20mA 20mA 20mALine (from 90~132VAC) 20mA 20mA 20mARipple and noise (p-p) 20mA 20mA 20mA

Dimensions/weight 6" (H) x 2.8" (W) x 9.8" (D)/4.4 lbs.Order # Model MSRP (ea.)72-8340 1~60V, 0~1.6A $229.00 $179.0072-8340C With Calibration Certificate Call For Pricing72-8345 1~36V, 0~3.0A 229.00 179.0072-8345C With Calibration Certificate Call For Pricing72-8350 1~20V, 0~5.0A 229.00 179.00

With Calibration Certificate Call For Pricing

®®

Multi Range Switch Mode Power SupplyCompact adjustable laboratory supply is ideal fortest, measurement and service applications wheretight voltage and current regulation are critical. Its unique feature is that it delivers up to 80W ofconstant output power in three selectable ranges.Output on/off control allows user to set voltage and current with the supply’s output turned off.Additionally, a front panel “review” button displaysvoltage and current settings, without a connectedload. Multiple units may be cascaded in master/slaveconfiguration to suit higher voltage or currentrequirements. Features: •Efficient switch modedesign •Extremely compact footprint •Remotesensing •Four digit LED display •Simultaneousdisplay of voltage and current •Auto selectingconstant voltage (CV) and constant current (CC)modes •Ultra quiet convection cooling •Short circuit, overload, over voltage and thermal protection•75% efficiency at maximum •RoHs compliant

SpecificationsSelectable ranges 0~16V, 0~5.0A

0~27V, 0~3.0A0~36V, 0~2.2A

Voltage regulationLoad (from 0~100%) ≤ 20mVLine ≤ 4mVRipple and noise (p-p) ≤ 30mV

Current regulationLoad (from 0~100%) ≤ 10mALine ≤ 10mA

Power requirements 90~264VAC, 47~63HzDimensions 5" (H) x 2" (W) x 13" (D)Weight 4.2 lbs.Order # Description MSRP (ea.)72-8355 Multi Range Switch Mode Power Supply $299.00 $259.0072-8355C With Calibration Certificate Call For Pricing

®®

Switch Mode Laboratory DC Power SuppliesPrecision adjustable supplies are ideal for testing,calibration and service applications where tightvoltage and current regulation is critical. Coarseand fine adjustments for voltage and current enableprecise control. Dual digital displays simultaneouslyshow voltage and current to 0.1V (amp). Efficientswitch mode design enables very high outputcurrent in a compact lightweight package that is a fraction of the size of traditional models.

SpecificationsVoltage line/load regulation <5mVRipple and noise <5mV RMSRecovery time <5µS (50% load change, min load 500mA)Current line/load regulation 3mARipple current72-7685 <30mA RMS72-7690 <10mA RMS72-7700 <5mA RMS72-7705 <3mA RMSInsulation

Chassis and terminal >20MΩChassis and AC cord >30MΩ

Power requirements 115V/230VAC ±10%, 50Hz/60HzDimensions/weight 5.7" (H) x 5.0" x 11.2" (D)/7.1 lbs. Order # Output Voltage Output Current MSRP (ea.)72-7685 0~12VDC 0~30A $549.00 $484.0072-7985C With Calibration Certificate - Call For Pricing72-7690 0~18VDC 0~20A 549.00 484.0072-7690C With Calibration Certificate - Call For Pricing72-7700 0~24VDC 0~15A 549.00 484.0072-7700C With Calibration Certificate - Call For Pricing72-7705 0~60VDC 0~6A 549.00 484.0072-7705C With Calibration Certificate - Call For Pricing

®®

Dual Output Bench Power Supply Laboratory grade power supply provides adjustable 0~30VDC output, and 0~3Aadjustable current limiting, on each of two isolated channels. Four independentthree–digit LED displays simultaneously show output voltage and current foreach channel. Features: •Auto series or parallel tracking operation •Constantvoltage and constant current operation •Overload and reverse polarity protection•Temperature controlled variable speed fan •Very low ripple and noise •Powerrequirements: AC100V/120V/220V/240V ±10% 50/60Hz •Includes test leads and owners manual

SpecificationsOutput voltage (each channel) 0~30VDCOutput current (each channel) 0~3ATracking series output 0~60V, 0~3ATracking parallel output 0~30V, 0~6A

Constant voltage mode (CH-1, CH-2)Line regulation < 0.01% + 3mVLoad regulation < 0.01% + 3mV (rating current < 3A)

< 0.02% + 5mV (rating current > 3A)Ripple & noise < 1mV RMS (5Hz~1MHz)

Constant current mode (CH-1, CH-2)Line regulation < 0.2% + 3mALoad regulation < 0.2% + 3mARipple & noise < 3mA RMSDimensions/weight 53⁄4" (H) x 101⁄4" (W) x 105⁄8" (D)/15.4 lbs

Order # Description MSRP (ea.)72-7245 Dual Output Bench Power Supply $359.00 $329.0072-7245C With Calibration Certificate - Call For Pricing

®® YEAR LIMITED1 WARRANTY

C53_pg_414-415 8/14/08 1:04 PM Page 414

NET 30Terms



®®

Triple Output DC Power SupplyFeatures: •Triple output: 0~30VDC adjustable output plus 5V and 12V fixed outputs •0~3A adjustable current limiting •Constant voltage or currentoperation •Overload and short circuit protection •Current limiting indicator•LCD digital ammeter and voltmeter •High current binding post output for0~30V supply and easy snap on output terminals for 5V and 12V supplies •Power requirements: 120VAC, 60Hz

Order# Description MSRP (ea.)72-6628 Triple Output DC Power Supply $199.00 $167.0072-6628C With Calibration Certificate - Call For Pricing

®®

Compact Switch Mode Power SupplyEfficient switch mode power supply features a verycompact footprint that makesit an ideal match for portablecommunications equipment. Its 50% duty cycle surge rating comes in handy in demanding transmittingsituations. Perfect for two–way radio(including HF) and audio equipmentincluding autosound and multimedia systems. Output voltage is fixed at13.8VDC, recessed adjustment screw is located on the underside of the unit for user fine adjustment from 13.3~14.5VDC. Features: •Ultra high RFIimmunity •Very quiet thermostat controlled variable speed fan •Overvoltage and short circuit protection •Thermal cut–off protection •LED overload indicator•Convenient front panel cigarette lighter receptacle •Rear panel heavy-dutybinding posts

SpecificationsOutput voltage 13.3~14.5VDCContinuous output 15ADuty cycle (50% on/off) 18ALoad regulation 100mVLine regulation 50mVRipple and noise 50mV (p-p)Efficiency >80%Power requirements 110VAC, 60HzDimensions (H x W x D) 2.5" x 7.2" x 7.5"Weight 3.91 lbs.Order# Description MSRP (ea.)72-8110 Compact Switch Mode Power Supply $99.95 $89.9572-8110C With Calibration Certificate - Call For Pricing

Front

Back

®®

Adjustable SwitchMode Power SupplyLaboratory gradeswitching power supply providesadjustable 0~40VDCoutput, and 0~5Aadjustable currentlimiting. OVP (OutputOver-Voltage Protection)protects voltage sensitive loads byshutting down the supply when outputexceeds set voltage. Efficient switch mode designprovides very high output capabilities, in a small, lightweight unit.Dual 31⁄2 digit LED displays simultaneously indicate output voltage and current.Features: •Excellent load and line regulation •Low ripple and noise •Coarse/finevoltage and current adjustments •Auto cross-over for CC (Constant Current) and CV(Constant Voltage) modes •Thermostat controlled fan •Overload, over temperature andshort circuit protection

SpecificationsOutput voltage 0~40VDCOutput current 0~5ALoad regulation 0.5% + 100mVLine regulation 50mVRipple and noise 20mV (p-p)Power requirements 90~265VAC 50/60HzDimensions/weight 41⁄2" (H) x 8" (W) x 103⁄4" (D)/6.6 lbs.Order # Description MSRP (ea.)72-7295 Adjustable Switch Mode Power Supply $249.00 $188.0072-7295C With Calibration Certificate Call For Pricing

Triple Output 10 Amp Power SupplyHigh current supply is a popular choice for servicing a wide variety ofelectronic devices. Variable output isadjustable from 0~30VDC, with 0~10Acurrent limiting. Dual LCD displaysimultaneously shows output voltageand current. Individual fixed 12VDCand 5VDC outputs are also providedfor TTL and CMOS circuits. All outputsare fully isolated, allowing series connection in any combination, for greater voltageflexibility. Temperature controlled, variable speed fan cooling ensures quiet, reliableoperation. 3⁄16" diameter binding posts accepts banana plugs or spade terminals,providing access to the variable output. Push terminals are provided for each fixedoutput. Features: •Large 5⁄8" digit LCD display •Display accuracy to 0.1V, 0.1A•Excellent load and line regulation •Low ripple and noise •Overvoltage, overload,temperature and short circuit protection •Detachable IEC power cord

SpecificationsVariable output 0~30VDC, 0~10AFixed output (#1) 12VDC, 500mAFixed output (#2) 5VDC, 500mALoad regulation 50mVLine regulation 10mV Ripple and noise 5mV (RMS)Power requirements 120VAC, 60HzDimensions/weight 43⁄4" (H) x 8" (W) x 13" (D)/ 22 lbs.

Order# Description MSRP (ea.)72-7660 Triple Output 10 Amp Power Supply $249.00 $209.0072-7660C With Calibration Certificate - Call For Pricing

®®

High Current Switch Mode Power SupplyEfficient switch mode power supply features a very compact footprint and lightweight design. It is perfect for telecommunicationsequipment, two–way radio (including HF) and audio equipment including high power autosound and multimedia systems.Features: •Ultra high RFI immunity •Very quiet thermostat controlled variable speed fan •Overvoltage and short circuitprotection •Thermal cut–off protection •Bi–color LED power/overload indicator •Rear panel heavy-duty binding posts

Specifications #72-8115 #72-8116Output voltage 13.8VDC fixedContinuous output current 25A 40ALoad regulation 200mVLine regulation 50mVRipple and noise 50mV (p-p)Efficiency >78%Power requirements 110VAC, 60HzDimensions (H x W x D) 4.33" x 8.67" x 8.67" 4.33" x 8.67" x 11.81"Weight 1.21 lbs. 1.1.61 lbs.Order # Description MSRP (ea.)72-8115 25A $139.00 $109.0072-8115C With Calibration Certificate - Call For Pricing72-8116 40A 189.00 167.0072-8116C With Calibration Certificate - Call For Pricing

®®

Back

Front

21


21

C53_pg_414-415 8/14/08 1:05 PM Page 415


21

416 1-800-543-4330Fax 1-800-765-6960

Heavy-Duty 60 Amp Power SupplyHigh current supply is fully adjustable from 1~15VDC, making it suitable forcommunications racks,HAM radio stations,autosound display and servicing. Remote sensing input allows output voltage to be measured externally, ideal when the load is located some distance from thepower supply. Output voltage is adjusted via front panel control, external 5Kohmpotentiometer (#28-0678 not included), or external 0~5VDC control source. Efficientswitch mode design provides very high output current in a compact lightweightpackage. Temperature controlled, variable speed fan cooling ensures quiet, reliablelong-term operation. Dual LED digital display simultaneously shows output voltageand current. Front panel banana jacks provide convenient access for loads up to 5A. Heavy-duty, rear mounted 3⁄8" stud posts accept banana plugs, ring terminals orspade lugs for loads up to 60A. Features: •Remote voltage control •Remote sensing•Large 5⁄8" high LED digits •Display resolution to 0.1V, 0.1A •Excellent load and lineregulation •Low ripple and noise •Overvoltage, overload, temperature and shortcircuit protection •Detachable IEC power cord

SpecificationsOutput voltage 1~15VDCOutput current 60ALoad regulation 0.1% +5mVLine regulation 0.05% +3mVRipple and noise 40mV (p-p)Efficiency 85%Meter accuracy ±1% +1 countPower requirements 100~240VAC, 50~60HzDimensions/weight 41⁄4" (H) x 83⁄4" (W) x 141⁄4" (D)/ 12.8 lbs.

Order# Description MSRP (ea.)72-7655 Heavy-Duty 60 Amp Power Supply $399.00 $314.0072-7655C With Calibration Certificate - Call For Pricing

®®

Multiple Outlet DC Power StripConvenient when a number of permanent items are connected to a power supply, while others are routinely added and removed. Attached 8AWG cable isterminated with gold plated, color–coded spade lugs. Binding posts accept spadeterminals, bare wire, single or paired banana plugs. This unit is divided into twoindependent sections, with a combined total current capacity of 35A. Section One:•Two sets of heavy-duty, individually fused binding posts, current capacity 35A each,total max combined capacity 35A •0~35A analog ammeter Section Two: •Six sets of 10A binding posts, 15A max total capacity •15A fuse •0~15A analog ammeter•Lighted rocker switch Other features: •Isolated steel case •Separate ground lug•Dimensions: 21⁄2" (H) x 31⁄2" (W) x 13" (L)

Order # MSRP (1–3) (4–up)72-6627 $74.95 $47.95 $39.95

®®

True Sine Wave Power InverterHigh-quality power inverter provides300W of continuous 120VAC power from a 12VDC power source. Unlike

conventional lower cost inverters, whichprovide a stair-step “modified” sine wave,

this unit provides smooth, pure sine wave output,identical to that from the utility company. This is

especially useful when powering sensitive test andmeasurement equipment and some computer products.

Input connections are heavy-duty screw terminals, output is a standard three-prong (NEMA 5-15R) AC receptacle. Features: •Low input voltage alarm •Lowbattery shut-down •High input voltage shut-down •Temperature controlled coolingfan •Includes cigarette lighter plug and heavy-duty battery clips Specifications:•Output: 300W/500W continuous/surge •Efficiency: 85% •Current draw: 25.6A @300W output, 13.8VDC input •Dimensions: 2.6" (H) x 5.7" (W) x 8.4" (D)

Order # MSRP (ea.)72-8135 $179.00 $159.00

®®

Heavy Duty 40 Amp Power SupplyHigh current supply is a popular choice for stationary use, or servicing of all types ofautomotive electronic devices,communications and HAM radioequipment. Variable 3~15VDC

voltage range is suitable in a wide range of troubleshooting and repair applications.Efficient switch mode design provides high output current in a compact lightweightpackage. Whisper quiet fan cooling ensures reliable, long-term operation. Dualdigital display simultaneously shows output voltage and current. Front panel 3⁄16" diameter binding posts accepts banana plugs or spade terminals, providingconvenient access for loads up to 40A. Features: •Bright LED display •Large 5⁄8" digits •Display accuracy to 0.1V, 0.1A •Excellent load and line regulation •Low ripple and noise •Overvoltage, overload, temperature and short circuitprotection •Detachable IEC power cord

SpecificationsOutput voltage 3~15VDCOutput current 40ALoad regulation 230mVLine regulation 80mV ±10%Ripple and noise 10mV (RMS)Power requirements 100~240VAC, 50~60HzDimensions/weight 41⁄4" (H) x 83⁄4" (W) x 113⁄4" (D)/ 7.7 lbs.

Order# Description MSRP (ea.)72-7665 Heavy Duty 40 Amp Power Supply $299.00 $261.0072-7665C With Calibration Certificate - Call For Pricing

®®

Heavy-Duty 25 Amp Power SupplyHigh current supply is a popular choice for servicingautomotive electronic devices and communications equipment.Variable 3~15VDC voltage rangeis suitable in a wide range oftroubleshooting and repair

applications. Efficient switch mode design provides high output current in a compactlightweight package. Whisper quiet fan cooling ensures reliable, long-term operation.Dual digital display simultaneously shows output voltage and current. Front panel3⁄16" diameter binding posts accepts banana plugs or spade terminals, providingconvenient access for loads up to 25A. Features: •Bright LED display •Large 5⁄8"digits •Display accuracy to 0.1V, 0.1A •Excellent load and line regulation •Lowripple and noise •Overvoltage, overload, temperature and short circuit protection•Detachable IEC power cord

SpecificationsOutput voltage 3~15VDCOutput current 25ALoad regulation 200mVLine regulation 50mV ±10%Ripple and noise 5mV (RMS)Power requirements 100~240VAC, 50~60HzDimensions/weight 41⁄4" (H) x 83⁄4" (W) x 83⁄4" (D)/ 6.6 lbs.

Order# Description MSRP (ea.)72-7670 Heavy-Duty 25 Amp Power Supply $199.00 $167.0072-7670C With Calibration Certificate - Call For Pricing

®®

Regulated 13.8VDC Power Supplies Rugged design provides up to 30 minutes of full load continuous operation.Features: •Cigarette lighter output (3A, 6A and 10A only) •Lighted rocker switch •Analog current meter •Attached 6' three prong grounded power cordSpecifications: •Line/load regulation 1.5% •Input voltage: 110~127VAC, 60Hz

DimensionsOrder # Continuous Surge (H x W x D) MSRP (ea.)72-8140 3A 5A 31⁄4" x 41⁄2" x 7" $39.95 $29.9572-8141 6A 8A 43⁄8" x 51⁄2" x 91⁄4" 49.95 37.9572-8142 10A 12A 43⁄8" x 51⁄2" x 91⁄4" 69.95 52.9572-8143 15A 17A 43⁄4" x 8" x 101⁄4" 94.95 73.9572-8144 20A 22A 43⁄4" x 8" x 101⁄4" 119.00 94.95

®®#72-8141

21

#72-8143

C53_pg_416-417 8/14/08 1:06 PM Page 416

21

NET 30Terms


21


Isolated Variable AC Power SuppliesVariable AC supplies combine the safety benefits of an isolationtransformer with the serviceadvantages of a variableautotransformer. •Providesisolation from the AC line whenservicing “hot” chassis equipment•Protects AC powered test equipment•Variable0~145VAC output •Safelytroubleshoot powersupplies, regulatorsand output circuits•Minimize damageto associatedcomponents•Dualanalog meterssimultaneouslydisplay output voltage and current•Independent lineinput and variable output fuses provide protection to the variable supply and theequipment under test •Output fuse may be changed to a lower value, allowingservice tech to set current limit •Grounded 6' line cord and outlets

Specifications #72-1097 #72-1098Input voltage 100~127VACOutput voltage 145VAC (with 110VAC input)Max output current 3.5A 7ALine fuse (included) 6A 10AOutput fuse (included) 5A 9AOutput outlets One TwoDimensions (H x W x D) 53⁄4" x 91⁄8" x 9" 61⁄8" x 117⁄8" x 101⁄4"Weight 131⁄4 lbs. 173⁄4 lbs

Order # Description MSRP (ea.)72-1097 3.5A Power Supply $249.00 $169.0072-1097C With Calibration Certificate - Call For Pricing72-1098 7.0A Power Supply 399.00 314.0072-1098C With Calibration Certificate - Call For Pricing

®®®®


450VA IsolationTransformerFeatures: •Highpower handling •Two direct and two isolated outlets•Fused isolatedoutlets •Fused directoutlets •Illuminatedpower switch •Powerrequirements:120VAC, 60Hz

SpecificationsIsolated outlets (2) 450VA continuous, 550VA intermittentDirect outlets (2) 900VAIsolation leakage <0.1mADimensions/weight 6" (W) x 5" (H) x 9" (D)/16 lbs.

Order # MSRP (ea.)72-6670 $99.95 $63.95

10A Variable AutotransformerGives you the ability to vary line voltagebetween 0~130VAC. Perfect way to safelytroubleshoot power supplies, regulators,output sections, etc. Built-in ammeter shows currentdraw to help identify shorts before they can cause costly component failures.Replaceable fuse protection. Three prong grounded cord and socket provides convenience and safety.

SpecificationsInput 120V, 60Hz Output 0~130VAC Current 10A, 1.3KVA Fuse 10A AGC (included) Order# Description MSRP (ea.)72-110 10A Variable Autotransformer $199.00 $169.0072-110C With Calibration Certificate - Call For Pricing


High Voltage Probe with Digital MeterSelf contained high voltage probe measurespositive or negative voltage up to 40KVDC. Internal 31⁄2digit, 3999 LCD display provides resolution up to 0.1V with accuracyof 1%. Features: •Three ranges •Peak hold •Auto power off •Lowbattery indicator •200 hour battery life from alkaline 9V battery•Attached 35" ground lead •Meets IEC1010 safety requirements•CAT II rated Specifications: •Ranges: 400V, 4KV, 40KV•Resolution: 0.1V, 1V, 10V •Input impedance: 2,000Mohm •Max loading current:20µA •Max loading power: 0.8W •Sampling rate: 4 per second •Dimensions: 16.5" (L) x 3.15" (W)

Order# Description MSRP (ea.)72-6505 High Voltage Probe with Digital Meter $229.00 $179.0072-6505C With Calibration Certificate - Call For Pricing

®®

High Voltage Probe with Meter•Built-in meter measures voltages up to 40KVDC •Factorycalibrated at 25KV (±2% accuracy); full scale ±3% accuracy •Inputimpedence: 600Mohm •Meets IEC1010 safety requirements •35" ground lead •Positive polarity only, not for microwave ovens

Order # MSRP (ea.)72-6530 $149.00 $84.95

®®

HighVoltage Probe

The Tenma multiplier probe adapts most10Mohm multimeters into a high voltagemeter. Meets IEC1010 safety requirements.Specifications: Maximum working voltage: •40KVDC or peak AC, 28KVACRMS (60Hz) •Division ratio: 1000:1 •Input resistance: 1000Mohm Accuracy: •DC:± 1% (1KV~20KV) ±2% (20KV~40KV) •AC: ±5% (1KV~28KV RMS, 50/60Hz)

Order # MSRP (ea.)72-3040 $79.95 $52.95

®®

®®

Oscilloscope/Test Equipment Cart•Slanted top allows technician to view equipment at a convenient angle•Lower shelf for storage •Heavy-dutycasters •Adjustable back support with bumpers prevents damage to equipment •Gray •Dimensions: 16" (W) x 19" (L) x 331⁄2" (H) Weight: 25 lbs.

Order # MSRP (1-2) (3-up)21-1925 $139.00 $109.00 $88.25

C53_pg_416-417 8/14/08 1:07 PM Page 417

21


21

418 1-800-543-4330Fax 1-800-765-6960

BNC to BNC Jumper Cables•Made of high-quality, 50ohm RG-58U cable with molded strain relief •Male connectors

Fig. Order # Length (ea.) (2-4) (5-up)A 24-1455 1' $8.69 $8.29 $7.59A 24-785 3' 9.49 8.29 7.69A 24-790 6' 10.09 8.89 7.99A 24-795 12' 11.09 10.49 9.19A 24-1515 30' 21.95 18.95 15.49

Test LeadsFig. Order # Description Length (1-9) (10-24) (25-49)B 21-605 BNC to Alligator Clips 39" $5.09 $4.49 $4.09C 21-600 BNC to IC Clips 39" 7.99 7.49 6.99D 21-555 Banana to IC Lead Set 36" 5.29 4.63 4.29E 21-1190 Banana to Alligator Lead Set 36" 4.09 3.59 3.29F 21-2235 Stackable Banana Plug Set (Black/Red) 3' 4.09 3.69 3.39F 21-2240 Stackable Banana Plug Set (Black/Red) 6' 4.29 3.79 3.35G 21-560 IC Clip Test Lead Set 36" 3.70 3.17 2.97H 21-350 24 Gauge Alligator Set (10 pieces) 24" 7.29 6.69 6.29H 21-355 20 Gauge Alligator Set (10 pieces) 24" 7.99 7.29 6.79H 21-3315 18 Gauge Alligator Set (10 pieces) 24" 9.69 8.89 8.19J 21-550 Universal Test Lead Kit 36" 8.49 7.69 6.89K 21-670 Coiled Test Lead Set 3'~6' 4.52 3.91 3.59L 72-485 Test Probe Set 48" 13.69 10.49 -M 72-052 Insulated Test Probe Set 48" 3.99 3.70 -N 21-565 IC Clip (Red) 23⁄16" 1.03 0.85 0.63N 21-570 IC Clip (Black) 23⁄16" 1.03 0.85 0.63P 21-685 Alligator Clip (Red) 31⁄4" 1.69 1.41 1.29P 21-690 Alligator Clip (Black) 31⁄4" 1.79 1.59 1.29Q 21-730 Mini IC Clip (Red) 11⁄2" 1.09 0.91 0.78R 21-370 Regular Alligator Clip 11⁄2" 3.49 2.71 2.46S 21-360 Heavy-Duty Alligator Clip 2" 3.99 3.88 3.54

If You Don’t See The Part You Need

CALL!

A

B

C

F

G

D

E

H

J

MN

M

K

P Q R S

®®

50ohm InsulatedBNC CableInsulated male

to male BNC cable assembly to IEC1010 standards 50ohm impedance. Blackinsulation boot. 40" length.

Order # (ea.)76-074 $10.05

®®

50ohm Insulated BNC toSheathed Stacking PlugsInsulated cable assembly withmale BNC to 4mm sheathedstacking plugs, black and red.IEC rating: 500V CAT, 150VCAT III, 3A 50ohm impedancecable. Black insulation boot.40" length.

Order # (ea.)76-076 $13.75

Male BNC Adaptor to Binding Posts

Black thermoplastic body. Black and red binding post

insulators. 500V RMS, 3A.

Order # (ea.)76-005 $7.29

®®

®®

60, 100, 200 and 250MHzOscilloscopeProbe KitsFeatures:•X1/X10attenuation

(#76-107 is X10 only) •1Mohm (X1) and 10Mohm(X10) input impedance •1.2m cable length •10-35pFcompensation adjustment •Low noise, improvedcompensation •#76-107 includes a readout actuatorpin on the BNC connector •Meets EN61010-2-031CAT I (IEC1010) requirements •600V maximum(DC+AC peak) •Includes accessory kit and storage pouch.

Bandwidth Risetime Specifications (X10 position) (X10 position)76-109 60MHz (-3dB) into 18pF <5.8nsec76-102 100MHz (-3dB) into 16pF <3.5nsec76-105 200MHz (-3dB) into 14pF <1.8nsec76-106, 76-107 250MHz (-3dB) into 14pF <1.4nsec

Order # Description (ea.)76-109 60MHz Oscilloscope Probe Kit $26.9576-102 100MHz Oscilloscope Probe Kit 37.9576-105 200MHz Oscilloscope Probe Kit 47.9576-106 250MHz Oscilloscope Probe Kit 73.9576-107 250MHz Oscilloscope Probe Kit w/RO 63.9576-110 Replacement Sprung Hook 5.59

100MHz OscilloscopeProbe KitFeatures: •InsulatedBNC •Ideal for portableoscilloscope and otherportable instruments

•x1/x10 attenuation •1.2m cable length •10~35pFcompensation adjustment •600V maximum input(DC+AC peak) •Meets IEC61010–2–031 CAT I 600Vrequirements •90 day warranty •Includes accessorykit and storage pouch

SpecificationsBandwidth (x10) 100MHz (-3dB) into 16pFRisetime (x10) <3.5nsecInput impedance (x1/x10) 1MΩ/10MΩ

Order # (ea.)76-123 $42.95

®®

C53_pg_418-419 8/14/08 1:08 PM Page 418

21

NET 30Terms


21


Test Lead SetFeatures: •Onered and one black48" PVC flexiblejacketed lead•Sheathed rightangle DMM plugs•0.08" (2mm)diameter contact tips •Meets 1000V Cat III requirements •10A rating •Includes slide-on alligatorclip adaptors

Order # (set)76-108A $7.25

Basic Test Accessory KitFeatures:•Smooth bodyprobes withreplaceable tips, 4mm springcontact with IC tipprotector and .080 (2mm), black and red •Safetypincer-flex clips, black and red •IEC leads, 4mmsheathed straight to right angle plugs, PVC, 1m, black and red

Order # (kit)76-081 $34.95

Probes, .080 (2mm) Tip to Stacking Retractile Plug, Silicone WireProbe lead with standard .080 (2mm) tips and highly flexible silicone jacketed wire. Instrument plug has retractile sheath for versatility and safety.40" in length.

Order Color (ea.)76-040 Red $6.2976-041 Black 6.29

IEC Probe, 4mm Spring TipSheathed Right-Angle Plug, Silicone WireProbe lead to IEC1010-2-031 safety standards. 4mm spring contact tip and highly flexible silicone jacketed wire. Instrument plug is sheathed 4mm plugwith insulated tip. 40" in length.

Order Color (ea.)76-047 Black $5.79

Lead, 4mm SheathedRight-Angle Plugs,Silicone WireSafety lead to IEC1010 specifications. Sheathed 4mmplugs with insulated tips on highly flexible silicone jacketed wire. 40" in length.


Right-Angle Test Lead KitKit includes:•One red and oneblack 60" siliconejacketed leadwith sheathed right-angle DMM plugs and 4mm banana plugcontact tips •Probes and leads meet 1000V CAT IIIP2 requirements, 36A •One red and one blacksprung hook probe adaptor •Spring hook meets500V CAT1 requirements

Order # (kit)76-091 $19.95

Deluxe Test Accessory KitKit includes: •Probe bodies with 4mm spring contacts, replaceable 2mm tips with ICcaps, black and red, 1000V, CAT III, 36A •Flexible pincer clips, black and red, 1000V, CATIII, 6A •Insulated alligator clips with piercing point, black and red, 1000V, CAT III, 20A•4mm banana plug adaptors, black and red, 42V, 10A •Spring-tip mini probes with ICcaps, black and red, 600V, CAT II, 1A •Insulated spade lug adaptors, black and red, 42V,36A •Leads, 4mm sheathed straight to right-angle plugs, 40" PVC wire, black and red,1000V, CAT III, 12A

Order # (kit)76-082 $56.95

Tweezer SetSMD component testing tweezers.Isolated contacttips in each leg connects to 4mm banana plugs, blackand red; 1m cable length. Durable gold plated BeCucontact tips grip small components during testing. Cable RG-174/U.

Order # (set)76-001 $17.79

Surface Mount Test Lead Set•Extra sharp tips forsmall surface mount components •One red andone black sharp tip test probe body, 1000V, CAT III, 20A •Highly flexible siliconejacketed wire, one black and one red sheathed 4mm straight to right angle plugs •Safety lead toIEC1010 specifications

Order # (set)76-090 $21.95

IEC Lead, 4mmSheathedStraight ToRight-AnglePlugs, Silicone Wire•Safety lead to IEC1010 specifications •Sheathed4mm plugs with insulated tips on highly flexible silicone jacketed wire

Order Length Color (ea.)76-018 40" Red $7.4976-020 60" Red 8.4976-021 60" Black 8.49

Sharp-Tip Test Probe BodySharp stainless steel tip on extended length probebody. Sheathed 4mm banana jack in handle.


Test Clip Lead KitSet of eight mini-hook patchcords. Each patch cord has miniature hook clips on each endof 19" long PVC wire. Set consists of two black, two red, onegreen, one yellow, one blue andone white cords. 2A max.

Order # (kit)76-004 $33.95

IEC Lead, 4mm Sheathed StraightPlugs, Silicone Wire•Safety lead to IEC1010 specification •Sheathed4mm plugs with insulated tips on highly flexiblesilicone jacketed wire •60" length


Safety Pincer Flex ClipPincer style contacts revolve and can grab terminalsto 0.16 (4mm) in diameter. Flexible shaft bendable to +90°.


Insulated Spade Lug Adaptors•6mm spade lug to 4mm sheathed jack. •Rating: 750V, 36A.


Miniature Alligator ClipWith Insulator

Mini-alligator clip with 3mm wire connection socket. Vinyl insulator. Steel, nickelplate. 2A max. Ten per bag.

Order Color (bag)76-056 Red $4.0576-057 Black 4.05

Retractable Stacking PlugTest LeadsFeatures: •4mm stacking banana plugs with clearretractable safety sheath •Flexible PVC jacketedwire •Nickel plated contacts •12A, 750V rated •40" length

Order# Color (ea.)76-120 Black $7.39

C53_pg_418-419 8/14/08 1:08 PM Page 419

21


21

420 1-800-543-4330Fax 1-800-765-6960

Combination 8MHzOscilloscope/DMM✔160 x 160 dot matrix

monochrome display ✔Built-in 3999 count DMM ✔USB interface with

data logging software Compact hand held unitprovides outstandingDMM performance plus added functions of a single channeloscilloscope. DMM features: •3999count display •Voltage,current, resistance,capacitance and frequency measurement•10MΩ input impedance•Continuity buzzer

Diode test scope features: •8MHz bandwidth•40MS/s sample rate •160 x 160 pixel monochromedisplay •Normal, free run and single shot triggermodes •Ten screen and set-up memory Generalfeatures: •USB interface •Backlit display withadjustable brightness and contrast •Sleep mode •Low battery indicator Includes: •USB cable •Data logging software •Test leads •Alligator clipadaptors •AC adaptor •Requires four “AA” batteries,not included

Specifications Range Best Accuracy DC voltage 400mV, 4V, 40V, ±(0.8% +8)

400V, 1000VAC voltage 4V, 40V, 400V, 750V ±(1% +15)DC current 400µA, 4000µA, 40mA, ±(1% +8)

400mA, 4A, 10AAC current 400µA, 4000µA, 40mA, ±(1.5% +8)

400mA, 4A, 10AResistance 400Ω, 4KΩ, 40KΩ, ±(1% +5)

400KΩ, 4MΩ, 40MΩCapacitance 40nF, 400nF, 4µF, ±(3% +8)

40µF, 100µFFrequency 10Hz~10MHz ±(0.1% +3)Vertical accuracy ±(5% +1)Input sensitivity 20mV/div~500V/div -Horizontal accuracy ±(0.01% +1)Timebase range 100ns/div~5s/div -Sample rate 40MS/s (real time) -Duty cycle 0.1% ~ 99.9% -Dimensions 1.9" (H) x 3.9" (W) x 7.9" (D)

Order # Model # (ea.)72-8220 UT-81B $261.00

Dual Channel Digital Storage OscilloscopesThe 2000 Series of digital storage oscilloscopes from Uni-T provide a cost effective combination of performance andease of use in a highly portable and compact instrument. Models feature real time sampling rates of 500MS/s andare available with bandwidths from 40MHz~200MHz. Features: •Color LCD display •Edge, pulse and videotriggering on channel CH1 and CH2 •Rising and falling edge triggering •8 bit A/D convertor, two channelssampling simultaneously •Separate USB host and device ports •RS-232 port •Quiet convection cooling •Compact size, requires only 5" of depth on the bench •See www.mcmelectronics.com for complete specifications

SpecificationsModel # UT-2042C UT-2062C UT-2082C UT-2102C UT-2152C UT-2202CBandwidth 40MHz 60MHz 80MHz 100MHz 150MHz 200MHzReal time sampling rate 250MS/s each channel, 500MS/s both channels combinedEquivalent sampling rate 25GS/sInputInput couplin AC, DC or groundInput impedance 1MΩ ±2%, 18±3pFProbe attenuation 1x, 10x, 100x, 1000xMax input voltage 400V (AC + DC peak, 10:1 attenuation)Channel interval ≥40:1Channel time delay (typical) 150psHorizontal Interpolation Sine(x)/xRecords Depth: 25K each channel, Length: 2 x 512KScan range (S/div) 5ns/div~ 5ns/div~ 5ns/div~ 2ns/div~ 2ns/div~

10ns/div~ 50s/div 50s/div 50s/div 50s/div 50s/div50s/div

Vertical Analog bandwidth 40MHz 60MHz 80MHz 100MHz 150MHz 200MHzSelectable bandwidth limit 20MHzTriggerRise time <8.7ns <5.8ns <4.5ns <3.5ns <2.3ns <1.8nsTrigger sensitivity DC~10MHz: 0.5div, 10MHz~max bandwidth: 1divTrigger level range Internal: Display center ±10div, External ±1.6VPre trigger capability Normal mode/scan mode, pre-trigger/delayed by time trigger.

Pre-trigger depth is adjustable.Release range 100ns~1.5sVideo triggeringTrigger sensitivity Internal: 2div peak value, External: 400mVTrigger type Supports NTSC and PAL broadcast standards,

line range:1~525 (NTSC), 1~625 (PAL)GeneralDisplay 5.7" color LCDResolution 320 x 240 pixelsDimensions 5.9" (H) x 12.6" (W) x 5.1" (D)Weight 5.75 lbs. (2.6KG)Power requirements 100VAC~240VAC, 45Hz~440Hz, 30W

Order # Model # Bandwidth (ea.)72-8225 UT-2042C 40MHz $650.0072-8230 UT-2062C 60MHz 775.0072-8235 UT-2082C 80MHz 895.0072-8240 UT-2102C 100MHz 975.0072-8245 UT-2152C 150MHz 1095.0072-8250 UT-2202C 200MHz 1225.00

Probe Body With .080 (2mm) TipSmooth probe body with sheathed 4mm jack in handle. Standard .080 (2mm) brass tip.


Fully Insulated IEC Alligator ClipInsulated alligator clip meetsIEC1010 safety standards to1000V. Insulationpiercing feature addsversatility to usage.

Order Color (1-9) (10-24) (25-up)76-054 Red $4.29 $3.99 $3.4976-055 Black 4.29 3.99 3.49

Replaceable Tip Probe Body Set

Black and red smooth body probes with replaceabletips, 4mm spring contact with IC tip protector and.080 (2mm) brass. Pouch included.

Order # (set)76-080 $6.99

IC Test Clips•For use with standard 14~40pin DIP ICs •The insulated pin hood surrounds the DIPpins to prevent accidental shorting •High-quality moldedhinge spring, ensures positivepin contact •Gold plated contacts to ensure low resistance connections

Dimensions Order # Pins (W) x (L) (ea.) (2-4) (5-up)22-660 24 11⁄4" x 11⁄2" $12.49 $11.39 $10.7022-665 28 17⁄16" x 11⁄2" 15.95 15.24 14.5022-670 40 21⁄16" x 17⁄16" 19.95 19.12 18.19

C53_pg_420-421 8/14/08 1:09 PM Page 420

21

NET 30Terms


21


Analog Oscilloscopes•Dual channel •Sweep system •Adjustable triggering modes •Dual time base •Calibrated 23 step time bases

Specifications #73-952 #73-420 #73-953 #73-505 #73-495Model # 2190B 2120B 2125A 2160A 1541DVertical Amplifiers (CH1 and CH2)Bandwidth 100MHz 30MHz 30MHz 60MHz 40MHzSensitivity 5mV/div to 5V/div. 5mV/div to 5V/div. 5mV/div to 5V/div. 5mV/div~ 5mV/div~

1mV/div to 1V/div 1mV/div to 1V/div 1mV/div to 1V/div 1V/div x 5mag 1V/div x 5mag(at x5 MAG) (at x5 MAG) (at x5 MAG)

Accuracy ±3% ±3% +-3%, +-3%, 5mV~5V/div; 5 mV/div~ (±5% at x5 MAG) (±5% at x5 MAG) +-5% at x5 +-5%, 1 mV, 2mV/div 5 V/div +- 3%

(x5 gain),+-5%Input impedance 1MΩ +3% 1MΩ +3% 1MΩ±2% 1MΩ±2% 1MΩ ±2%,Input capacitance 25pF ±10pF 25pF ±10pF 25pF ± 10pF 25pF±10% 25pF ± 0%Frequency response DC: DC to 100MHz DC: DC to 100MHz 5 mV~5V/div: DC to 60 MHz DC to 40MHz (-3dB),

(-3 dB) (-3 dB) DC to 30MHz (-3 dB) DC to 7MHz (-3dB)x5: DC to 10MHz (-3dB) at x5 gain

Rise time 3.5ns (12ns 2120B) 3.5ns (12ns 2120B) 12ns 5.8ns 8.8 ns(Overshoot <5%) (Overshoot <5%) (Overshoot <= 5%) (Overshoot <= 5%) (Overshoot <= 5%)

Maximum input voltage 400V 400V 400V 400V (DC + AC peak) 400V(DC + AC peak) (DC + AC peak) (DC to AC peak) 800VAC p-p (DC + AC peak)

Vertical amplifiersOperating modes CH 1, CH 2, CH 1, CH 2, CH 1: CH 1, CH1, CH2, dual, CH1, CH2, dual,

dual, add dual, add single trace alternate/chop alternate/chop Horizontal amplifierX-Y Mode X Axis = CH1. X Axis = CH1. Switch selectable using CH1: Y axis. CH1: Y axis.

Y Axis = CH2 Y Axis = CH2 X-Y switch, CH2: X axis CH2: X axisCH1: X axis CH2: Y axis

Sensitivity 5 mV/div to 5 V/div, 5 mV/div to 5 V/div, Same as vertical Same as vertical Same as vertical CH1 and CH2 CH1 and CH2 channel 2 channel 2 channel 1

Price $1565.00 $538.00 $632.00 $1075.00 $782.00

#73-420 #73-505

Triple Output DC Power Supply•Dual displays •Selectable outputs •Variable andfixed outputs •Independent or tracking operation•Adjustable current limiting •Designed to operatecontinuously at rated output •Short circuit protection,overload protection, reverse polarity protection

Specifications #73-935 #73-951Model # 1670A 1671AOutput voltage Variable 0~30VDC Variable 0~30VDC

Fixed 12VDC (+5%) Fixed 12VDC (+5%)Fixed 5VDC (+5%) Fixed 5VDC (+5%)

Output current 0~3A 0~5A0~500mA 0~500mA0~500mA 0~500mA

Metering display 2 digital 3 digit LCD 2 digital 3 digit LCDAmmeter range 0~.999A 0~.999APrice $185.00 $205.00

#73-935

#73-951

DC Regulated Power Supplies

Compact, laboratory grade, bench top switching DCpower supplies utilize standard 115VAC outlet as thepower source, providing continuous operation up to200W, and maximum current output continuouslywith minimal thermal drift. Features: •Over voltageprotection, short circuit temperature •Constant voltage operation •Constant current operations•Presetting current limiting value •Designed withcourse and fine output voltage and current limitingcontrols. Specifications: Ripple and noise: 20mV•Line regulation: 20mV •Input voltage: 90~265VAC,50/60Hz •Meter accuracy: 1%+2 counts •Dimensions:4.5"(H) x 8"(W) x 10.8"(D) •Weight: 6.6 lbs.

Order # 73-1025 73-1030 73-1035B&K # 1665 1666 1667Output voltage: 1~19VDC 1~40VDC 1~60VDCOutput current: 0~10A 0~5A 0~3.3ALoad regulation: 0.5%+200mV 0.5%+100mV 0.5%+100mVMeter type: 31⁄2 digit LED 3 digit LED 3 digit LEDPrice $245.00 $245.00 $233.00

High-Voltage Probe•Measures voltages up to 40KVDC •Factorycalibrated at 25KV (±2% accuracy); full scale ±3%accuracy •Positive polarity only •Not for microwaveovens Contains: •Two tips, conventional roundneedle type and flat spring type for easy access

Order # B+K # (ea.)73-520 HV-44 $114.00

CRT UniversalTester Adaptor•Mfr. #CRX-A

Order # (ea.)73-760 $74.95

50,000 Count Dual Display Bench Multimeter•PC compatible •Easy to read dual display •Veryaccurate, feature packed True RMS (AC, AC + DC)bench DMM •Low cost •Ideal for high schools andtechnical trade schools, college and university labs,research and development, service, maintenance, test and manufacturing benchtop applicationsSpecifications: •Resistance measurements up to 50MΩ •Measures frequency to 500KHz •DBm measurement •RS-232 interface Includes:•Instruction manual and test leads

Order # Mfr. # (ea.)73-1020 5491A $401.00

C53_pg_420-421 8/14/08 1:09 PM Page 421

21


21

422 1-800-543-4330Fax 1-800-765-6960

Synthesized In-CircuitLCR/ESR MeterFeatures:•Measurementparameters: Z, L,C, DCR, ESR, D, Q, and Ø •Testconditions: 100Hz,120Hz, 1KHz,10KHz, 100KHz(886 only) 1VRMS, 0.25V RMS,0.05V RMS •0.5%basic accuracy •Dual LCDdisplay •SMDsurface mounttweezer probeincluded •Very quickresponse, userfriendly •Fullyauto/manual

selection •DCresistance measurement

•Rechargeable battery/ACpowered •Infrared RS-232interface capability Softwarefeatures: •Go-No Go testing(component sorting) •Remotebin (component grading)•Remote operation

SpecificationsTest signalFrequency 100Hz, 120Hz, 1KHz, 10KHz

100KHz (886 only)Frequency accuracy ±0.1%Level 1V RMS, 0.25V RMS, 0.05V RMS,

1VDC (for DCR)level accuracy ±5%Output impedance 100Ω, ±5%Order # B+K # (ea.)73-967 885 $553.0073-968 886 746.00


SMD Probe(included)

LCRMeter

•Measures capacitance, resistanceand inductance •Measures dissipation factor of capacitors and Q of inductors •31⁄2 digit LCDdisplay •Low battery and overloadindicator •Test leads included•Mfr. #875B

Order # (ea.)73-645 $185.00

Dual Display Auto Ranging LCR MeterMeasures capacitance, resistance (of non-inductivecomponents) and inductance. Components can bemeasured with selectable test frequencies in series or parallel modes. 41⁄2 digit main LCD displays valuesto 19,999, and the secondary 3 digit 1,000 count display reads D or Q. Both models can be used ineither auto ranging or manual ranging modes.Features: •Selectable test frequencies 100Hz,120Hz, 1KHz, 10KHz (100Hz and 10KHz model #879 only) •Display hold •Relative mode •Tolerancemode •Backlight (model #879) •RS-232 interface(cable and software required) Includes: Pair of alligator clips, DC 9V battery and users manual

Fig. Order # Mfr. # (ea.)A 73-680 878A $205.00B 73-1095 879 284.00


A B

Multi-NetworkCable Tester•Auto scansthin ethernet(BNC), 10BaseT (UTP/STP),100BaseTx, RJ-45, 356A,TIA-568A, andToken Ring

cables in seconds •Detects miswiring, polarization,and continuity •Tests ground of shielded twistedpair cables •With remote unit, tests installed cableeither from wall plate or patch panel •LED displayfor clear indication of problems •Protective rubberboot •Belt clip

Order # B+K # (ea.)73-939 230A $67.95

Counters•Selectable gate times 0.1 sec and 1.0 sec •7 digitLED display •Suitable for VHF communications upto 200MHz •Highly accurate time base •Compactbench top AC powered counter

Order # B+K # (ea.)73-960 1803D $205.00

Video Monitor TesterDesigned to test both Mac and PC monitors.Features: •16 monitor type/scan resolution selection •Color bar, cross hatch, dot, raster and windows selection •VGA, SVGA, RGB, HV, V selection •Four DB-15 (rear panel) outputs formultiple monitor burn-in •Includes AC adaptor•Mfr. #1280A

Order # (ea.)73-921 $309.00

810C Capacitance Meter•31⁄2 digit LCD display •Nine ranges: 200pF~20mF•0.1pF resolution •Low battery and overrange indicator Specifications:•Ranges: 200pF, 2nF, 20nF,200nF, 2mF, 20mF, 200mF,2000mF, 20mF •Accuracy: ±(0.5% rdg + 1 dgt + 0.5pF) for200pF~200mF range; ± (1.0%rdg + 1 dgt) for 2000mF range;± (2.0% rdg + 1 dgt) for 20mFrange •Resolution per (range):0.1pf (200pF ), 1pF (2nF), 10pF (20nF), 100pF (200nF),

1nF (2mF), 10nF (20mF), 100nF (200mF), 1mF(2000mF), 10mF (20mF) •Test frequency: 819Hz (200pF~2mF), 81.9Hz (20mF), 8.9Hz(200mF~20mF) •Comes complete with test leads and owners manual •Mfr. #810C

Order # (ea.)73-840 $77.95

SenseLite™ LEDFlashlight with ACVoltage DetectorThe SenseLite™ high intensity pocketflashlight can be used todetect the presence of AC

voltage at a socket, switch, or wire. Simply place theflashlight near the area to be tested and press thepower button. If there is an AC voltage present, thered LED will shine brightly. Features: •AC voltagedetection (detects AC voltage from 40VAC~300VAC)•Water resistant •Long battery life •No lithiumbattery, uses standard alkaline “AAA” battery•100,000 hour bulb •Mfr. #SenseLite™

Order # (ea.)73-1015 $19.95

AnalogPocket SizedMultimeter•Some applicationsstill require agood old analogmeter forinstant measurement•Compact size•Measures DC voltage•Measures AC voltage•Measures DC current•Measures resistance •Measures decibels •9V and1.5V battery test

Order # B+K # (ea.)73-889 117B $20.95


C53_pg_422-423 8/14/08 1:10 PM Page 422

NET 30Terms


21


Portable HDTV Pattern GeneratorModel 1253 is an affordable HDTV test pattern generator that delivers accuratetest patterns for the testing of the most common HDTV displays including Plasma,LCD, TFT, CRT, DLP, GLV, and OLED digital display products. The 1253 candisplay from its HDTV component (YPbPr) outputs or S-video output (luminancepatterns only), fourteen of the most useful patterns for twelve of the mostcommonly used video formats. It is lightweight and portable and is ideal for on-the-bench and in-the-field testing. The 1253 is a must for TV repair engineersor technicians to test and calibrate digital televisions, video engineers to test andmaintain studio equipment, or home theater installation technicians to fine-tunethe picture quality of digital televisions. The 1253 displays the most popularformats including 1920 x 1080 30i, 1280 x 720 60p, 704 x 480 60p, NTSC, PAL,SECAM. A unique feature of the 1253 is the Overscan DVD aspect ratio pattern.The feature covers the most commonly use aspect ratios used for all moviesrecorded to DVD media. Specifications: •Video formats: 1920 x 1080 30i, 1920 x1080 30p, 1920 x 1080 24p, 1280 x 720 60p, 1280 x 720 30p, 1280 x 720 24p, 704 x480 60p, 704 x 480 30p, 704 x 480 30i, NTSC, PAL, SECAM •Patterns: SMPTEBars (75%, 100%), Pluge, Needle, Color Bars (75%, 100%), Cross Hatch (16:9,12:9, 4:3), DVD aspect ratio (1.33:1, 1.78:1, 1.85:1, 2.35:1), Raster, Multiburst,Focus, Staircase, ANSI Gray, Window, Checker, Overscan-Bounce •Operation: 15 buttons, 1 power switch •Y Output: 1V peak-to-peak into 75ohm, on BNC •Pb, Pr Outputs: 0.7V peak-to-peak into 75ohm, on BNC •S-video (SVHS): 5 pinDIN •Video output buffer response: 100MHz @ -3db •Power supply: 9V alkalinebattery •Power indicator: Red LED •Timing accuracy: 25ppm (0.0025%) •Video level error: < 1.5% •Size: 5.6" (L) x 3.1" (W) x 1.1" (D) •Weight: 6.2 oz.

Order # Mfr. # (ea.)73-990 1253 $612.00

NTSC Generator with RF Output•Portable NTSC Pattern Generator with RF, S-video, composite video •Videopatterns: Color bars (white, yellow, cyan, green, magenta, red, blue and black),crosshatch, dot, staircase, circle, raster (white, red, green, blue, yellow, cyan,magenta and black), window, center cross •Interlaced or progressive scanningsystem •Composite video: 1.2V p-p into 75ohm •S-video: Chrominance output: 0.75V p-p into 75ohm, luminance plus sync output: 1V p-p into 75ohm •RF output:CH3 (61.25MHz) crystal controlled •Sound: 1KHz audio tone •Power requirements:One 9V battery (included) or AC adaptor (not included) •Mfr. #1211E

Order # (ea.)73-926 $238.00


Pinger PlusNetwork IPTester

Hand held tester used for installing andmaintaining computerLocal Area Networks(LANs) running theTCP/IP protocol.Features: •PINGs atfull 10/100 auto negotiatespeeds •PING usingvariable packet sizes •PINGup to 99 consecutive times•PINGs single, list, or rangeof IP addresses •Identifies10/100/1000 BaseTX Linksignals •Stores up to 8preprogrammed profiles that include Pinger Plus+ IPaddress, gateway addressand 1 to 8 destination IPaddresses that can bePINGed individually orsuccessively •Verifies LANoperation at a remote location over the internet•Displays MAC address for a tested IP address•Provides port ID function (link light activation)•Identifies wire pair polarity •DHCP client capability•Web browser interface for unit setup and softwareupgrade •Alphanumeric keyboard for easy IP addressentry Includes: •Pinger Plus, four “AA” batteries, AC adaptor, carrying case, user guide

Order # Mfr. # (ea.)72-7955 PNG65 $359.00

CableTool TDRCable Lengthand FaultMeter

An essential tool foranyone in the cablingindustry, this hand held tester is used for installing andmaintaining metalliccabling. Uses TDRtechnology to quicklydetermine the distance to a cable fault (open or short) in feet or meters. Ideal forcontractors, electricians and low voltage installers.Features: •TDR, volt meterand tone generator in oneproduct •Measures distanceto shorts/opens up to 2500'•Over 60 pre-storedstandard and four user defined NVPvalues for accurate lengthmeasurements •Measures and displays voltages up to 250V RMS •Transmits a tone onto the line for cable tracing •Standard banana jack connectors arecompatible with a wide range of leads or connectorsfor testing any cable type. Includes: CableTool, BNCadaptor, “F” coax adaptor, two test leads, four “AA”batteries, instruction manual

Order # Mfr. # (ea.)72-7960 CT50 $279.00

LanMaster 26 Pro Link Tester andAccessory Kit

The LanMaster 26 provides critical network connectivity andconfiguration informationneeded to maintain andtroubleshoot a LAN at anaffordable price. Features:•Verifies connectivity for10/100/1000 BaseTX links•Identifies VoIP (Voice overIP) and PoE (Power overEthernet) ports •Measuresport voltage to ensure proper voltage level and warnsof low voltage levels •Identifies speed, duplex modeand auto-negotiation for 10/100/1000/VoIP/PoE ports•Provides port identification function (link lightactivation) •Identifies connection as LAN, NIC or autocrossover. Includes: Pro link tester, 9V battery, RJ-45coupler, user guide. The accessory kit contains acordura carrying case, RJ-45 jumper cable and female-to-female adaptor.

Order # Description Mfr. # (ea.)72-7970 Pro Link Tester LM26 $199.0072-7980 Accessory kit AP-1 19.95

21

Video Monitor Tester•Tests PC and MAC monitors •Generatescrosshatch, dots, color bars and raster patterns ingreen, blue, red, black andwhite •CGA, VGA, SVGA•Standard DB–9, DB–15 and DB–15 Hi–res mini connectors •Powerrequirements: One 9V battery(included) or AC adaptor (notincluded) •Mfr. #1275

Order # (ea.)73-892 $194.00


Portable HDTV Pattern Generator and NTSC Generator KitThis convenient kit includes a portable HDTV patterngenerator (#73-990) and NTCS generator (#73-891)with carry case.

Order # Mfr. # (kit)73-995 1253/1257 KIT $699.0073-998 Carry case 31.95

C53_pg_422-423 8/14/08 1:11 PM Page 423

21


21

424 1-800-543-4330Fax 1-800-765-6960

Attention Educators: You may be eligible for a25% discount on selected Fluke products throughthe Fluke Education Partnership Program. Callone of our friendly account representatives forcomplete information.

114/115/117 True-RMSMultimetersMultimeters for every application! 114 is the electricalmultimeter tool fortroubleshooting and“go/no-go” testing. Itincludes a feature toeliminate inaccuratereadings caused by“ghost” (stray) voltage.115 is the multimeter forfield service techniciansand is the solution for awide variety of electrical and electronic testingapplications. 117 is theelectrician’s multimeterwith integrated non-contact voltage

detection. It’s the idealmeter for demanding settings

like commercial buildings, hospitals and schools. All three meters include: •Resistance andcontinuity •Large white LED backlight to work inpoorly lit areas •Min/max/average to record signalfluctuations •Cat III 600V safety rated •Digitaldisplay: 6000 counts, updates 4/sec

Order # 105-650 105-655 105-660 105-275Fluke model 114 115 117 ToolPak

(TPAK)VoltAlert™ •AutoVolt/LoZ • •Current 10A 10ADiode • •Capacitance 1nF~9,999µF 1nF~9,999µFFrequency .1Hz~50KHz .1Hz~50KHzPrice $129.95 $149.95 $179.95 $30.64

HVAC Multimeter with Temperature and MicroampsQuickly troubleshoot problemswith HVAC equipment andflame sensors. Test motor startand run capacitors up to 10,000microfarads. Measurements upto 600VAC or DC, 40mΩ, diodetest and exceptionally fastcontinuity. Features: •Built-inthermometer and temperatureprobe included •Microamps totest flame sensors •LoZ: Lowinput impedance to eliminate

ghost (stray) voltage to makemore accurate measurements •Resistance, continuity,frequency and capacitance •CAT III 600 V safetyrated •Includes TL75 hard point test lead set andmanual •Mfr. #116

Order # (kit)105-670 $169.95

80 Series V DigitalMultimetersThe new 83V and 87V have improved measurementfunctions, troubleshootingfeatures, resolution and accuracy to solve more problemsin electronics, plant automation,power distribution and electro-mechanical equipment.Both operate very similar to theclassic 83 and 87, but with moreproblem solving power, safety,convenience and impactprotection. Includedaccessories: TL75 test leads,

AC72 alligator clips, removableholster, 9V battery (installed), operator’s guide, CD-ROM with user manuals, bead type thermocoupletemperature probe (87 only).

Order # 105-570 105-565Fluke model 83-5 87-5Features:True-RMS AC voltage and current •for accurate measurements on non linear signalsSelectable filter for accurate voltage and •frequency measurements on motor drives0.05% DC accuracy •41⁄2 digit mode for precise measurements •Built-in thermometer lets •you carry one less toolLarge display digits and two-level bright • •white backlight for increased visibility10,000µF capacitance range for • •components and motor capsPeak capture to record transients •as fast as 250µsMeasure up to 1000V AC and DC • •Measure up to 10A, 20A for • •up to 30 secondsAuto and manual ranging • •for maximum flexibilityResistance, continuity and diode test • •Frequency to 200KHz and % duty cycle • •Min/Max/Avg recording to capture • •variations automaticallyRelative mode to remove test lead • •resistance from low ohms measurementsImproved sleep mode for long battery life • •Limited lifetime warranty • •Removable holster with built in test lead • •and probe storageCat IV 600 V and Cat III 1000 V electrical • •safety ratings

Price $359.95 $369.95

170 Series DMMsTough. Precise. Packed with features: •Lifetime warranty•True-RMS AC voltage and current •Min/Max/Average•Frequency and capacitance capabilities •Easy access battery door •Auto ranging •The 179 measures temperature in °C and °F

Mfr. # Mfr. # Mfr. #Features 175 177 1796000 count display • • •Auto hold and manual hold • • •IEC 1010 Rating: • • •CAT IV 600V/CAT III 1000VBacklight for measurements • •in low visibility environmentsTemperature measurements in °C •and °F, Thermocouple includedBattery door provides battery access • • •without breaking the calibration sealCompatible with Fluke ToolPak™ • • •meter hanging kit (#105-275)

Order # Mfr. # (ea.)105-295 175 $229.95105-300 177 239.95105-305 179 249.95105-410 179/TPK (includes 259.95

179 and ToolPak)105-275 ToolPak 30.64


77-4 Digital MultimeterVersatile meter for field service or bench repair, it hasthe features needed to repairmost electrical and electronicproblems. Simple to use.Significant improvements over Fluke’s original 70 serieswith more measurement functions, conformance to thelatest safety standards, and a much larger display that’seasier to view. Measurements:•Wide 1000V measurementrange •Average responding AC measurements •0.3% accuracy •10A continuous•Frequency, capacitance,

resistance, continuity Features: •Backlight for work in dim areas •Min/max •Auto and manualranging •Includes: User’s manual, CD-ROM, TL75 test lead set, holster and 9V battery (installed) •Visit www.mcminone.com for complete specifications

Order # (ea.)105-680 $249.95

320 Series Clamp Meters•Both models measure AC current, AC voltage, continuity, and resistance•Model 322 also measures DC voltage•Precise low current measurementswith better than 2% basic accuracy•Controls positioned for one–handoperation •Safety rating: IEC1010–2–031, 600V Cat III •Includes test leads, safetyinformation, instruction card, two “AAA” batteries, and case

Order # Mfr. # Description (ea.)105-330 321 Smaller size, rugged reliability, $102.95

and continuity test function105-335 322 All of 321 features with DC volts 111.95

C53_pg_424-425 8/14/08 1:12 PM Page 424

21

NET 30Terms


21


330 Series Digital Clamp Meters•Auto shut–off maximizes battery life•Small body and jaws fit perfectly in your hand and intotight places •Large, backlit display (on most models) is easy to see •In–rush current function(on most models) for measuring starting current for motors, lighting, etc. •Improved low currentmeasurement accuracy from new microprocessor technology •Meter controls are positioned socurrent measurements can be done with one hand •Handy display hold keeps measurements onthe display •Three year warranty

Order #Mfr. # Description (ea.)105-320 Rugged reliability at a basic price, measures AC amps, $146.95333A AC/DC volts, and ohms with display hold. 400A.105-321 Large display with backlight, measures AC amps, AC/DC 166.95334A volts, ohms, display hold, and motor start–up current (in–rush). 600A.105-322 True–RMS clamp meter, large backlit display measures AC amps, 222.95335A AC/DC volts, ohms, display hold, and motor start–up current

(in–rush). 600A.105-323 True–RMS clamp meter that measures AC/DC current and voltage, 304.95336A ohms,display hold, motor start–up current (in–rush) with large display and

backlight. 600A.105-324 The top of the line True–RMS clamp meter, large jaw measures 354.95337A AC/DC current and voltage, ohms, display hold, motor start–up current

(in–rush), frequency, MIN MAX capability and a large backlit display. 1000A.

ElectricalTestersEnjoy all theadvantages oftraditional solenoidtesters, with addedfunctionality, but noneof the typical drawbacks.Features voltagemeasurement, continuity,built-in flashlight, GFCI tripcapability, and the legendaryruggedness and reliability of Fluke. The T+ is the basic electrical tester forresidential electricians andHVAC technicians, who need a durable, reliable tool for testing voltage and continuity. The T+PRO is the ideal, full-featured tester for the demandingcommercial and industrial electrician. Both modelsfeature: •3 forms of AC/DC voltage detection: Lights,beeper, and vibration for added user protection andconvenience •Still indicates live voltage withoutbattery power for added user protection •Extra-heavy-duty, replaceable test leads for added durability •CAT IV 600V, CAT III 1000V rated •AC/DC voltage:12~600V •Includes test leads and probes, two “AAA”batteries and test lead strap. The T+PRO alsofeatures: •Backlit LCD display •Display resolution of 0.1V •Resistance to 9.99Kohm •Rotary fieldindication •Display hold for easier viewing in hard-to-test areas •Visit www.mcmelectronics.com for complete specifications

Fig. Order # Mfr. # (ea.)A 105-690 T+ $49.95B 105-695 T+PRO 84.95

A B

T5 Electrical TestersFeatures: •OpenJaw™current measurement up to100A •Measures AC and DCvoltage •Resistance to1000ohm •Continuity beeper •Compact and ruggeddesign •Available in 600V and1000V models

Order # Mfr. # Description (ea.)105-238 T5-600 600V tester $99.95105-239 T5-1000 1000V tester 124.95

87V/AEK Advanced Electronic Combo KitFluke has combined the best selling, feature packed87V multimeter with the TL81A test lead set for the complete solution to electronic circuit board troubleshooting. And realize a $86 savings over individually purchased items. Kit includes: •87Vmultimeter with temperature frequency, capacitance250µs peak min/max •TL81A deluxe electronic testlead set, includes 22 of the most useful accessories for making measurements in low energy, electronicapplications •C115 deluxe carrying case with shoulder strap •80PK-1 thermocouple bead probe

Order # (kit)105-710 $419.95

117 True-RMSDMM and 322Clamp MeterCombo KitKit includes:•117 True-RMSdigitalmultimeter with non-contact voltagedetection •322 compactclamp meter•TL75 hardpoint test leadset •ToolPak magnetic meter hanging strap •C115 deluxe carrying case with shoulder strap

Order # (kit)105-665 $259.95

87V/E2 Industrial Electrician Combo KitMake industrial troubleshooting even more productive. Save over $50 compared with the individual purchase price. Kit contents: •87V industrial multimeter •Lightweight soft case for optimal protection and accessory storage •1.5m heat resistant silicone leads •Removable probes with4mm of exposed metal for use on industrial circuits•Retractable long reach alligator clips •Magneticmeter hanger (TPAK) to attach meter to steel panelsfor hands-free operation •K-type temperature probe

Order # (kit)105-645 $419.95

TLK-225 SureGripMaster Accessory Setwith Storage CaseThe TLK-225 combines the entire new SureGripaccessory line into a single set, then adds a handy roll-up pouch.Includes: AC220 plungerstyle alligator clips, AC280plunger style hook clips,AC283 plunger stylepincer clips, AC285 largejaw alligator clips, TP220industrial sharp testprobes, TL224 right to straight silicone insulated test leads, sixpocket storage pouch.

Order # Mfr. # (set)105-500 TLK-225 $108.16

179 Electronics Multimeter and Deluxe Accessory KitDesigned to meet the needs of the Electronic’sProfessional. Rugged 1000V CAT III multimeter withbacklight and industrial strength test lead probe kitin a lightweight, soft case to hold your meter and youraccessories. Includes 179 TRMS multimeter, TL224test leads, TL910 test probes, AC280 heavy-duty hookclips, 80BK integrated temperature probe, ToolPak™meter hanging accessory, and C35 soft case. Limitedlifetime warranty on the multimeter, 1 year on all accessories.

Order # Mfr. # (kit)105-675 179/EDA2 $279.95

C53_pg_424-425 8/14/08 1:12 PM Page 425

21


21

426 1-800-543-4330Fax 1-800-765-6960

Non-Contact AC Voltage Detector and LED FlashlightCombines a bright LED light and pen-style volt detector in one convenient, compact design. Detectsvoltage from 90V~600VAC from 1'~5' away. Withexclusive dual-sensitivity, the voltage detector glowsblue when it’s near AC voltage and glows red when it’s at the source. Features: •LED light with 100,000hour life •Rated to CAT IV 600V •Includes “AAA” battery •Dimensions: 23cm(H) x 14cm(W) x 2.5cm(D)•Mfr. #LVD2

Order # (ea.)105-700 $30.85

VoltAlert™ Voltage TestersThe next generation

VoltAlert™ ACvoltage testersfrom Fluke areeasy to use, just

touch the tip to aterminal strip,outlet or cord.When the tip

glows red and the unit beeps, you know there’s voltage in the line.Electricians, maintenance, service, safety personnel,and homeowners can quickly test for energizedcircuits and defective grounds on the factory floor, in the shop, or at home. Features: •Dual visual andaudible indication •Voltbeat™ technology and systemself-test to continually test the integrity of the unitand battery for added user protection •CAT IV, 1000Vover-voltage category rating •Compact design fitseasily into pocket

Fig. Order # Mfr. # Description (ea.)A 105-640 1LAC-II 20~90VAC $25.25B 105-635 1AC-II 90~1000VAC 25.25

A

B

Non-Contact ACVoltage Detector and LED FlashlightCombines a bright LED light and voltdetection in oneconvenient, compactdesign. Exclusive dual-sensitivity voltagedetector. Blue lightmeans you’re close. Red light means you’reat the source. Detects

voltage from 40V~300VAC. Comes with a versatileclip to secure light to a pocket, hat or even a paneldoor. Mfr. #LVD1.

Order # (ea.)105-600 $26.88

TL71 Premium DMM Test Lead Set•Flexible silicone insulated leads are heat and cold resistant •Distinctive comfort grip probes•Recommended for µV measurements •CAT III,1000V, 10A; CAT IV, 600V, 10A •Mfr. #TL71

Order # (set)105-454 $20.00

2mm/4mm TestLead Set•2mm threadedprobes with removable 4mmbanana-stylespring contacts•Flexible 1.5M silicone leads •Cat III, 1000V,Cat IV, 600V, 10A

Order # Mfr. # (set)105-498 TL76 $23.38

Deluxe Electronic Test Lead Set•22 piece set with quadfold pouch •Everything for virtually every electronic need including probes, alligator clips, tip extenders, pincers, leads and adaptors •Cat II, 300V

Order # Mfr. # (set)105-496 TL81A $111.34

TL80A Basic Electronic Test Lead Set•Six piece set with zippered case •Probes, alligatorclips, and tip extenders for electronic applications•Cat II, 300V rated •Mfr. #TL80A.

Order # (set)105-456 $52.32

SureGrip™ DMM Accessories•Superior gripping surface made from thermoplasticrubber •Improved ergonomics •New design makesclips, hooks, and probes more versatile •AllSureGrip™ accessories are rated Cat III 1000V and Cat IV 600V

Order # Mfr. # Description (ea.)105-430 AC220 Alligator clips $27.80105-432 AC280 Hook clips 24.45105-434 AC283 Pincer clips 27.80105-436 AC285 Alligator clips 16.69105-438 TL221 Silicone test lead extension kit 21.12105-440 TL222 Silicone test leads 21.12105-442 TL224 Silicone test leads 21.12105-444 TP220 Industrial test probes 13.34105-446 TL220 Industrial test lead set 54.59105-448 TL223 Electrical test lead set 54.59

#105-430

#105-432

#105-434

#105-436

#105-438

#105-440

#105-442

#105-444

#105-446 #105-448

Industrial Multimeter and Infrared Thermometer Combo KitSave money by purchasing two popular Fluke products in one package! This kit includes the Fluke 179 true RMS multimeter with a built-inthermometer and the Fluke 61 non-contact infraredthermometer. The Fluke 179 features a 1000V trueRMS AC and DC range, 0.09% basic accuracy and alarge, easy-to-read display with backlight. The Fluke61 safely measures rotating or energized equipment;features include an 8:1 distance to spot size ratio anda laser pointer to pinpoint measurement target. Thekit also includes an 80BK probe, test leads and ispackaged in a C800 carrying case.

Order # Mfr. # (kit)105-555 Fluke-179/61 Kit $339.95

C53_pg_426-427 8/14/08 1:13 PM Page 426

21

NET 30Terms


21


Scopemeter 190 Series: Speed, Performance, and Analysis Power•Dual-input- 200, 100, or 60MHz bandwidth •Up to 2.5GS/s real-time sampling per input •Large, high resolution color or monochrome screen •Connect-and-View™ automatic triggering and a full range of manualtrigger modes •Digital persistence for analyzing complex dynamic waveforms like on an analog scope (190C)•Fast display update rate for seeing dynamic behavior instantaneously •Automatic capture and replay of 100screens •27,500 points per input record length using Scope Record mode •Trend Plot paperless chart recorder fortrend analysis up to 22 days •Up to 1000V independently floating isolated inputs •Waveform reference for visualcomparisons and automatic pass/fail testing (190C) ofwaveforms •Vpwm function for motor drive and frequencyinvertor applications •1000 V Cat II and 600 V Cat IIIsafety certified •Five hours rechargeable Ni-MH battery pack

Order # Mfr. # Bandwidth Screen (ea.)105-462192B/003 60MHz Monochrome $1561.00105-464196B/003 100MHz Monochrome 2495.00105-466199B/003 200MHz Monochrome 2845.00105-345196C/003 100MHz Color 2845.00105-350199C/003 200MHz Color 3195.00

Scopemeter 120 SeriesThe compact Scopemeter 120series is the rugged solutionfor industrial troubleshootingand installation applications.This truly integrated test toolis an oscilloscope, multimeterand “paperless” recorder inone affordable, easy-to-useinstrument. Find fastanswers to problems inmachinery, instrumentation,control and power systems.Features: •Dual-input40MHz or 20MHz digital

oscilloscope •Two 5,000 count true RMS digitalmultimeters •A dual-input TrendPlot™ recorder•Connect-and-View trigger simplicity for hands-offoperation •Cursors (Fluke 124) •Shielded test leads for oscilloscope, resistance, and continuitymeasurements •10:1 voltage probe included withFluke 124 for reduced circuit loading •Up to sevenhours battery operation •600V CAT II safety certified•Rugged compact case

Order # Mfr. # Bandwidth (ea.)105-200 123/003 20MHz $1275.00105-468 124/003 40MHz 1575.00

190 Series and 120 Series Selection Guide190C Color ScopeMeter Series 190B ScopeMeter Series Fluke 120 Series

Order # Fluke 199C Fluke 196C Fluke 199B Fluke 196B Fluke 192B Fluke 124 Fluke 123#105-350 #105-345 #105-466 #105-464 #105-462 #105-468 #105-200

Bandwidth 200MHz 100MHz 200MHz 100MHz 60MHz 40MHz 20MHzMax real time sample rate 2.5GS/s 1.0GS/s 2.5GS/s 1.0GS/s 0.5GS/s 25MS/s 25MS/sMax record length 3000 Points 3000 Points 3000 Points 3000 Points 3000 Points 512 Points 512 Points (per input) (min/max pairs) (min/max pairs)Number of inputs 2 Scope and 2 Scope and 2 Scope and 2 Scope and 2 Scope and 2 Scope or DMM 2 Scope or DMM

1 DMM (Isolated) 1 DMM (Isolated) 1 DMM (Isolated) 1 DMM (Isolated) 1 DMM (Isolated)Input sensitivity 2mV/div.~ 2mV/div.~ 5mV/div.~ 5mV/div.~ 5mV/div.~ 5mV/div.~ 5mV/div.~

100V/div. 100V/div. 100 V/div. 100V/div. 100V/div. 500V/div. 500V/div.Independently isolated • • • • • – –floating inputsDisplay & display modesDisplay Color Color Monochrome Monochrome Monochrome Monochrome MonochromePersistence Digital with Digital with On/Off On/Off On/Off – –

variable decay variable decayEnvelope mode • • • • • • •Frequency spectrum FFT • • – – – – –Waveform compare • • • • • – –N-Cycle triggering • • – – – – –Pass/fail testing • • – – – – –TriggeringConnect-and-view™ trigger • • • • • • •Edge, single, free run • • • • • • •Video • • • • • • •Video ines • • • • • • •Pulse width • • • • • – –External • • • • • • With ITP 120 OptionAdvanced functionsCursors • • • • • • –Zoom • • • • • – –Dual input trendplot™ • • • • • • •ScopeRecord™ mode • • • • • – –Automatic capture & replay • • • • • – –last 100 screensWaveform mathematics • • • • • – –Save set-ups & screens 10 10 10 10 10 20 10Safety, power & warrantySafety (EN61010-1) 1000V CAT II 1000V CAT II 1000V CAT II 1000V CAT II 1000V CAT II 1000V CAT II 600V CAT III *1

600V CAT III 600V CAT III 600V CAT III 600V CAT III 600V CAT III 600V CAT IIIBattery 4 hr Ni-MH 4 hr Ni-MH 4 hr Ni-MH 4 hr Ni-MH 4 hr Ni-MH 7 hr NiMH 4 hr NiCdLine power Adaptor/battery charger includedPC printer interface Using optional optically isolated RS-232 adaptor cable PM9080True RMS multimeter 5000 counts volts, amps, ohms, continuity, diode, tempWarranty 3 year on main instrument. 1 year on standard accessories

*1 Max input voltage 1000V CATII with VPS40 10:1 voltage probe.

RecommendedAccessories 190and 120 Series

Order # Mfr. # Description 190 Series 120 Series (ea.)105-470 SCC 120 Software, cable, and carrying case package • $310.00105-472 SCC 190 Software, cable, and carrying case package • 435.00105-474 C125 Compact soft case • 30.00105-476 C195 Universal soft carrying case • • 130.00105-478 PAC91 Optical to parallel printer adaptor cable • • 235.00

C53_pg_426-427 8/14/08 1:14 PM Page 427


428 1-800-543-4330Fax 1-800-765-6960

L200 Probe LightThis small but rugged probe lightattaches to any Fluketest probe. Features:•Bright white LED•120 hours of batterylife •Uses two 3Vwatch batteries•Distinctive Fluke yellow

Order # (ea.)105-585 $17.24

Digital Multimeter AccessoriesOrder # Mfr. # Description (ea.)105-023 AC89 Insulation piercing clip $30.02105-012 TL75 Hard Point™ Right angle 16.69

lead/probe set105-021 TP80 Electronic test probes 24.45105-033 C10 Holster for Series 10 22.04105-034 C12A Soft case for Series 10 22.04105-008 C25 Soft case for 23, 25, 27 28.63

and 70 Series105-010 C90 Soft case for 21, 23 and 27.45

70 Series in a C70 holster105-251 i200 200A AC current clamp 112.42105-275 Tpak ToolPack™ Meter Hanger 30.64105-390 TL910 Profile probes 46.76

MicroScanner Pro™The all–in–oneMicroscanner™ Pro is ideal for home networking professionals. This tester verifies andtroubleshoots multiplecable types including coax(RG–6 for CATV/CCTV), twisted–pair cable (UTP, STP, SSTP), and other two–wire networks such as speaker wires, securitynetworks, and telephonecabling. Features:•Tests both coaxial

and UTP cabling •Usespatented TDR technology to ensure accurate lengthmeasurements •Measureslength (UTP and coaxialcable), including individualpair lengths to the hub

•Flashes hub light •Generates four different tonesfor locating cables hidden in walls, ceilings, or wiringclosets •Identifies active networking 10/100 hubs•Checks wire configuration (Wiremap) •Pinpointsopens, shorts, crossed and split pairs •Identifies halfor full duplex capability •Enables patch cable testingwithout couplers or external adaptors •Pocket sizeand durable •Low battery indication on displayIncludes: Microscanner™ Pro, wiremap adaptor,coax adaptor (CATV type, “F” connector), 9V alkalinebattery, and user guide.

Fig. Order # Description (ea.)A 105-360 MicroScanner Pro™ $419.00B 105-366 Office/room ID kit 146.00

105-362 Carrying case 20.00105-364 Bare wire adaptor 20.00

B

A

MicroMapper Cable TesterThe MicroMapper is a small hand held cable tester which enables network professionals to quickly andeasily verify the integrity of ethernettwisted pair cabling. In one quick step, theMicroMapper will test twisted pair cabling

for opens, shorts, crossed, reversed, andsplit pairs. TheMicroMapper also includes a built–in tone generator. Features:

•Testing of twisted pair cables for opencircuits, shorts, crossed pairs, reversed pairs, and split pairs •Easy to read fault display •Tonegenerator for tracing installed cables hidden in walls,floors, and ceilings •Shield integrity testing •Specialdesigned remote unit that enables one person testingof installed cables •Small remote unit that slides into master unit for convenient and safe storage•Automatic sleep mode and power switch for decreasepower consumption •Low battery LED Includes:MicroMapper and MicroMapper Remote, patch cable,user guide, and carry case.

Order # (ea.)105-368 $129.00

Intellitone™ Toner and Probe SeriesThe Intellitone series gives you superior vision for locating cables hidden in floors, ceilings, walls and in bundles. Its breakthrough digitaltechnology makes it the first tool to tone and trace safely and effectivelyon active networks. Features: •Ends cable location confusion,decisively rejects noise and false signals •Locates correct cable bundle •Isolates cable and wiring within a bundle despite cable bleed •Audible, visual signal I.D. simplifies cable location in noisyenviroments •Diagnoses essential cable information with polarity,continuity and talk battery •Identifies and diagnoses POTS with line 1service and polarity The probe includes: Lanyard, owners CD andquick start guide, 9V battery The toner includes: Coax “F” connectoradaptor, RJ-11 and RJ-45 patch cables, test leads with alligator clips,lanyard, owners CD, quick start guide, 9V battery The kit includes:The toner and probe, coax “F” connector adaptor, RJ-11 and RJ-45 patchcables, test leads with alligator clips, lanyard, owners CD and quickstart guide and two 9V batteries •Visit www.mcmelectronics.com forcomplete specifications

Fig. Order # Description (ea.)A 105-370 Intelliprobe 100 probe $79.00B 105-372 Intellitone 100 toner 79.00A+B 105-374 Intellitone 100 toner and probe kit 139.00

A B

MicroScanner™Pro VDV KitTheMicroScanner™Pro VDV kit isthe essential, all-in-one voice data videoverification toolkit. Features:•Tests twistedpair, coax andbare wire

•Measures length via TDR •Finds distance to fault•Locates cables behind walls •Match cables to offices•Identifies active network ports and hubs Includes:MicroScanner™ Pro, Intellitone probe, wiremapadaptor (office ID 4), coax adaptor (CATV type, “F” connector), bare wire adaptor, office/room ID kit(1~3 and 5~7), 9V battery, quick reference guide anduser CD.

Order # Mfr. # (kit)105-545 MT-8200-24A $599.00

62 Mini InfraredThermometerNon-contact thermometer

is perfect for professionals.Features: •Best accuracy in its class •Backlit display for poorly lit

areas •Dual displays shows current and max measurements simultaneously•Protective rubber boot for addeddurability. Temperature measurementtechniques: •Spot measure: Determinethe absolute surface temperature of anobject •Temperature differential: Comparetwo spot measurements against each other•Scanning: Detect changes along a wide orcontinuous region target. Specifications:•Temperature range: -30°~500°C •Distanceto spot size: 10:1 •Laser sighting: Single

point, offset •Emissivity: Pre-set to 0.95•Accuracy: ±1% of reading or ±1°C, whichever isgreater •Response time: Less than 1⁄2 second•Weight/dimensions: 7 oz., 6" x 4" x 1.5" •Power: 9V alkaline battery •Battery life (alkaline): 10 hrs.with laser and backlight on, 20 hrs. with laser andbacklight off •Display hold: 7 seconds. Includes:9V alkaline battery, operator’s guide, protective boot,storage holster

Order # (ea.)105-620 $99.50

C510 PremiumLeather Meter Case•Hand crafted leatherwith rugged snap andheavy-duty stitching•Fits all Fluke metersand test leads

Order # (ea.)105-267 $49.59

TLK-220 SureGripAccessory Set withMeter Carry Case (US version)The TLK-220combines theaccessories of Fluke’sTL220 test lead setwith an additional alligator clip, then

puts all the pieces into a case which can accomodate alarge DMM. Includes: AC220 plunger style alligatorclips, AC285 large jaw alligator clips, TP220 industrialsharp test probes, TL224 right to straight siliconeinsulated test leads, zippered vinyl case with moveable divider.

Order # Mfr. # (set)105-505 TLK-220 $108.16

212

1

C53_pg_428-429 8/14/08 1:15 PM Page 428

21

NET 30Terms


21


For data sheets and manuals, visit

www.mcmelectronics.com

CapAnalyzer 88A Series IISolving problemscaused by electrolyticcapacitors has neverbeen easier now thatyou can locate badcapacitors withoutunsoldering them from the circuit and without spending timetroubleshooting. TheCapAnalyzer 88A uses atest frequency higherthan other testers,automatically discharges the capunder test,checks for DCleakage (DCR),and then checksand displays ESR on a20 segment bar scale. Both DCR and ESRmeasurements are made under 50 millivolts so noactive devices are turned on. Because it checks DCRfirst, it will alert you if the capacitor or anything elsein the circuit is shorted or leaky before it checks ESR.Microprocessor controlled, the CapAnalyzer 88A hasmore features and is more accurate than olderdesigns. A three-color chart on the front panel showstypical ESR readings of good and bad capacitorsdepending on their capacitance. Includes a lowcapacitance one-handed tweezer test probe foraccuracy and ease-of-use.

Order # (ea.)72-6508 $209.00


LeakSeeker 82BSimply touch LeakSeeker’s probe anywhere on the PCboard foil that shows a low resistance and LeakSeekerautomatically calibrates itself to the resistance of thedefect. Touch a pad in one direction or the other andLeakSeeker will beep higher or lower, and light theLED distance scale to show you if you’re getting closeror future from the defect. LeakSeeker automaticallyre-calibrates itself so that there is no adjustingrequired. The solder pad where the beep is highest is the location of the defect! Find slightly leakycomponents, up to 150ohm! LeakSeeker comes with a special set of gold-plated test clips and probes and a complete manual with a hands-on tutorial.

Order # (ea.)72-6300 $209.00


ZM1 and ZM1P Audio Impedance MetersPowerful compact units measure impedance at 100Hz, 330Hz, 1KHz and 10KHz, providing accuratemeasurement of a single loudspeaker, an entire distributed system, or individual components such as resistors, capacitors and inductors. 31⁄2 digit LCD display clearly shows system impedance withaccuracy of up to 0.1Ω. On 70V distributed systems, it calculates the wattage rating of the entire system.Measurements are taken at audio frequencies, whichallows use with impedance matching transformers,switchers and volume controls, providing more accurate readings than with conventional DMMs. The ZM1P has all the features of the ZM1, but addsan overload protection circuit that prevents the meterfrom being damaged by amplifier output overloads upto 120VAC. The ZM1P also features a tone generatorto improve system testing and performance. Bananatest leads included. Requires eight “AA” batteries(#292-020), not included.

SpecificationsTest frequencies: 100Hz, 330Hz, 1KHz, 10KHz Voltage ranges: 25V, 50V, 70V, 100V Measurement ranges (ohms): 0~199.9Ω

0~1999Ω0~19.99KΩ

Measurement ranges (watts): 0~19.9W0~199.9W0~1999W

Accuracy Impedance ± 2%Wattage ± 3%

Dimensions 8" (H) x 31⁄4" (W) x 21⁄4" (D)

Order # Mfr. # Figure (ea.)72-7420 ZM1 A $380.0072-7900 ZM1P B 473.00

A B

XLR 1KHz Tone Generator Perfect for testing mic inputs on mixingconsoles, processors, cable snakes andextensions. Compact device is actuallythe size of a standard XLR-M connector,and is powered by standard 12~48VDCphantom power. When connected tophantom powered input, the red LEDlights and the test tone is generated.

SpecificationsTest frequency: 1KHz sine waveOutput level: -48dBm Dimensions: 3⁄4" (dia.) x 23⁄4" (L)

Order # (ea.)72-7440 $36.89

ML1 Minilyzer®

Professional HandHeld Audio AnalyzerFeatures: •Provides a comprehensive set of analysis functions•Measures RMS or peak levels inabsolute or relativeunits •THD+Nmeasurement in dBand % •Frequencymeasurements•Polarity test function •Commonmode measurements(signal balance) •Auto ranging •Auto scaling •Auto nulling •Frequencysweep capabilities with external signals •SelectableHP and A, C weighting •100 x 64 pixel graphical display with backlight •Complements the Minirator®

•Balanced XLR and unbalanced RCA input•Headphone output •Frequency range of 5Hz~24KHz•THD measurement bandwidth of 10Hz~20KHz•Level measurements in dBu, dBV, VRMS, V peak•Accuracy ±0.5% from 20Hz~20KHz •Input rangefrom +20dBu~-90dBu •Includes owners manual•Requires three “AA” batteries, not included

Order # (ea.)72-6758 $644.00


MR1 ProfessionalMultifunctional Audio GeneratorFeatures: •Hand held size •Low distortion sinewave from 20Hz~20KHz•Frequency response: ±0.5dB •Sweepable from20Hz~20KHz with sevenselectable speeds •Squarewave •White and pinknoise •Polarity test signal•Retractable balanced200ohm XLR output•Unbalanced 200ohm RCA output •Wide level range:-76dBu~6dBu •Large character display •Includesowners manual •Requires two “AA” batteries, not included

Order # (ea.)72-6654 $236.00


Tone Plug Sound System Test GeneratorThe Tone Plug is a uniquemulti-function audio testinstrument capable of generating a variety of signals for troubleshooting,analysis and calibration of sound systems andcomponents. Built into a male XLR microphoneconnector, the Tone Plug requires no batteries. Simply plug into a phantom powered microphoneinput of a mixer and its ready to go. Features: •11user selectable functions including: •Five sine wavetest tones at 100Hz, 250Hz, 400Hz, 1KHz, and 10KHz•VLF test signal (40/2400Hz) for testing sub-woofers,crossovers, and amplifiers •Short duration multi-frequency pulse for adjusting speaker time delays,reverbs and echo units •Amplitude sweep function foradjusting compressors, limiters and setting tape levels•Automatic frequency stepping mode of the five fixedfrequencies •Unique sweep tone for tracing wiring inracks and buildings when used with a telephone linetracer •Built-in LED indicator for checkingmicrophone cables and phantom power

Order # (ea.)72-6564 $52.95


C53_pg_428-429 8/14/08 1:15 PM Page 429

21


21

430 1-800-543-4330Fax 1-800-765-6960

PROGRESSIVE ELECTRONICSClassic Tone and Probe KitTechnicians save time when identifying and locating cable pairs or single conductors with thistone test kit. Great for installing or troubleshooting telephone, data, security/alarm, heating and air,audio/visual and electrical systems. The high powertone generator, continuity and voltage tester isequipped with a modular connector for standardphone jacks. Functions include sending tone, verifying lines, indicating line condition, identifyingtip and ring, providing “talk” battery and testingcontinuity. Designed to work with any tone generator, the inductive amplifier will identify andtrace wire within a group without damaging theinsulation. Features include a volume control withincreased sensitivity, recessed terminal ports forhand-set connection, and a recessed ON/OFF buttonto prevent battery drain. Use the handy carryingcase made of tough cordura to take this test kit anywhere. Kit contains: •Tone generator, inductiveamplifier and carrying case.

Order # Mfr. # Description (kit)72-3080 701K Classic tone and probe kit $110.96

Also available separately.Order # Mfr. # Description (ea.)72-3065 77HP High power tracer $36.3872-3070 200EP Inductive amplifier 69.64

PROGRESSIVE ELECTRONICS CATV Cable Tone Test SetDesigned specifically for the CATV industry, theModel 402K will send tone through any passivedevice along the cable path. Now you can tonethrough splitters, directional couplers and traps. Asa continuity tester, the 402K provides both audibletone and LED display to indicate resistance levels.The unit will even identify the presence of AC or DCvoltage on the cable under test. Each kit consists of:One transmitter, one receiver, one male “F” to “F”connector adaptor cable, one male “F” to alligatorclip adaptor cable, and a durable woven polyestercarrying case. Power requirements: Two 9V batteries(#292-035) not included. Mfr. #402K.

Order # (set)72-6574 $163.98

PROGRESSIVE ELECTRONICSBasic Tone and Probe KitFor professionals who need fundamental wire identification tools without the extra cost, the 601KBasic Tone and Probe Kit is the answer. Consistingof the 77M Tone Generator and the 200B InductiveAmplifier, this kit can be used on single conductors,twisted pairs, coaxial cables and de-energized electrical wiring. Includes a polyester zipper pouch.•Power requirements: Two 9V batteries (#292-035)not included •Mfr. #601K

Order # (kit)72-6572 $101.10

PROGRESSIVE ELECTRONICSPremium Tone and Probe KitWhen it comes to wire identification kits, the 801KPremium Tone and Probe Kit is top of the line!Containing the 77HP/6A High Power Tone Generatorwith bent nose piercing clips, increased talk batterysupply and higher voltage protection, as well as the200FP Filter Probe to filter out all that AC hum, the801K offers all the features professionals are lookingfor. Includes a high quality cordura case. •Powerrequirements: Two 9V batteries (#292-035) notincluded •Mfr. #801K

Order # (kit)72-6573 $180.55

PROGRESSIVEELECTRONICSTelephone Test SetAn all-weather test set fullyfeatured, engineered to be tough, yet lightweightand comfortable on yourshoulder. Features:•Versatile dialing (tone and pulse, built-in ringerwith adjustable ring tones,speed dial memory, and lastnumber redial) •Precisehook flash •Microphonemute •Easy-to-use talk and monitor keys •Audibleand visual mode indicators•Polarity test in any mode•Low battery indicator•Drop tested to 20' •Digital

safe monitor •Automatic ground-start operation•Unique quick-release belt clip •Premium cord set with bed-of-nails and piercing pin clips

Order # Mfr. # (set)72-6975 PE930 $210.00

PROGRESSIVE ELECTRONICSAdapToner Modular Break-Out Tone Generator Test KitThe AdapToner makes it simple to test any configuration of pairs in 8 position modular jacksand plugs. With a built-in tone generator combinedwith a modular breakout adaptor technicians cannow test continuity, polarity, send tone, and evensupply talk battery to any pair, in any configuration.Features: •8 position “snag proof” modular plug •8 position jack with protective cover •Tone, continuity, and talk battery supply using alligatorclips •Selectable solid/warble tone signal •Quick reference guide with common wiring configurations•Weather resistant design. The AT8K AdapTonerTest Kit (shown above) includes: •AT8 AdapToner,200EP Inductive amplifier and 700C carrying case•Power requirements: Two 9V batteries (#292-035) not included •Mfr. #AT8K

Order # (kit)72-6570 $151.76

PROGRESSIVEELECTRONICSModular Cable TesterRises above thecompetition withunique featuresincluding built-intone generator.Features: •Connectany eight positionmodular plug to the appropriate jack on

transmitter and a sweeping tone signal is applied toall pairs, at the other end use an inductive amplifierprobe to quickly locate corresponding plug or jack•Connecting the receiver unit with it’s sequencingred and green LEDs provide fast and accurateresults •Identifies opens, shorts, reversals,transposed pairs and will alert when connected to anactive circuit (without harm) •Tests 258, T568 A&B,10 Base-T and USOC •Power requirements: One 9Vbattery (#292-035) not included •Mfr. #468

Order # (ea.)72-6238 $107.59

PROGRESSIVEELECTRONICS Wire FinderProvides buriedcable tracing atdepths to 3' andlengths to 1000'.When tracing wiresin walls, the 508Sworks great on any type of cable including telephone, electrical, HVACcontrol wire, audio,

coaxial, and more. Using the AC outlet adaptor alsopermits use on energized 120VAC circuits. Finding aJ-box that has been covered over with plaster hasnever been easier. Specifications: •Transmitterfrequency: 477.5KHz •Transmitter power: 9V p-p(11mW) •Voltage protection: 240VAC, 500VDC•Battery life: transmitter 35 hours, receiver 20hours •Power requirements: Two 9V batteriesincluded •Mfr. #508S

Order # (ea.)72-6575 $286.14

PROGRESSIVE ELECTRONICS

C53_pg_430-431 8/14/08 1:16 PM Page 430

21

NET 30Terms


431

Compact Precision DMMwith AutoTect™and VolTect™Great value! Theultimate pocketsized meter, only3/8" thick and lessthan 3 oz. inweight. Offers full functionality:Measures AC and DC voltage to600V, AC and DCcurrent to 2000µA,resistance to 6MΩ, continuity withbeeper, capacitance to 2000µF,frequency to 30KHz, diode test. Features: •VolTect™,a built-in non contact voltage detector for ac voltages•AutoTect™, automatically selects between ACvoltage, DC voltage or resistance measurement based on the test point to which the leads areconnected •Fully auto ranging, offers nine differentmeasurement functions plus features that are usuallyfound in much more expensive and larger meters•One-year warranty, fully safety rated •Includes a silicone protective holster, deluxe carrying case, attached test leads, battery and manual •Visit www.mcmelectronics.com for completespecifications •Mfr. #PM55A

Order # (ea.)202-320 $52.95

Pocket DMM with Frequency andCapacitance✔Great for studentsShirt-pocket size meteronly 3/8" thick andweighing less than 3 oz.Offers full functionality andis fully autoranging with seven differentmeasurement functions with 27 full ranges ofmeasurement. Ideal for facilities and buildingmaintenance, automotive techs, students,homeowners and hobbyists. Features: •4000-count,33/4 digits auto ranging over sized display •MeasuresAC and DC voltage to 600V, resistance to 40MΩ,continuity with beeper, capacitance to 3000µF, andfrequency to 1MHz, diode test •CAT II 600V/CAT III300V dual rating, UL and CSA listing •One-yearwarranty •Visit www.mcmelectronics.com forcomplete specifications. •Mfr. #PM51A

Order # (ea.)202-315 $28.95

True RMS DigitalMultimeterIdeal for troubleshootingelectronics at the bench oron the job site. Features:•1000V/750V DC/AC trueRMS •Inductance to 40H, frequency to 40MHz,capacitance to 400µF, logicto 20MHz, resistance to40MΩ •10,000 count, 0.1%accuracy •Input warningtone when test leads are inwrong jack •10A AC/DC

fully safety fused•Continuity beeper

•Min/max, average, relative, peak, data hold •Three-year warranty Includes: Test leads withthreaded alligator clips, spare fuse, 9V battery(installed), Magne-Grip™ holster with magnetichanging strap and user’s manual. Visitwww.mcmelectronics.com for complete specifications. Mfr. #37XR-A.

Order # (ea.)202-265 $135.95

Circuit Breaker with AC WireTracer•Identify circuitbreaker to electricalsocket, trace AC cables in walls, sort AC wires in a bundle•Microprocessorcontrolled •Codedtransmission •Audible andvisual indicators •Includessensitivity adjustment •CAT III 150V rated •Cabletracing length to 500' nominal •Cable tracing depth to 15" nominal •Includes carrying case, 9V battery,manual. Visit www.mcmelectronics.com for completespecifications •Mfr. #ECB50A

Order # (ea.)202-295 $69.69

AC Line Splitter•Measures current without splittingAC line cords •Two measurementloops for increased sensitivity, X1 andX10 •Built-in voltage measurementpoints to check for voltage sags andsurges •Rated for 120V, 15A •Can beused with all brands/models of clampmeters •Visit www.mcmelectronics.com for complete specifications

Order # (ea.)202-300 $13.95

Non-ContactVoltProbe®

Lights, beeps, shakes,can't miss that voltagewith this non-contactvoltage detector. Designed for safety and limited troubleshooting without the expense. Fits conveniently in a shirt pocket. Features: •Detect AC voltage 100~600V •Totally insulated, no exposedmetal or conductive parts •Check for AC voltageswithout necessity of disconnecting the electrical system •Test for AC voltage cables, circuit breakers,wall sockets, junction boxes, fuses, etc. •Find and pinpoint breaks in wires •CAT III 600V •Visitwww.mcmelectronics.com for complete specifications•Mfr. #VP-600SB

Order # (ea.)202-335 $15.95

Digital Light Meter

Portable, easy-to-use, compact sized meter designed for one-handoperation. Features: •Measureswide range of light up to 20,000 fc orlux, front panel switchable •Accurate,high resolution of 0.01 fc/lux •Sensordome has 45" attached cord •Built-inCIE spectrum curve for accurate human eye response •Peak hold and data hold•Large, 31⁄2 digit display with backlightfeature •Meets CE EN61326-1 certificationfor safety ratings •Includes carrying case,lens cover, batteries and user’s manual •Visit www.mcmelectronics.com for complete specifications •Mfr. LM631A

Order # (ea.)202-325 $99.95

Pen Probe Style Digital MultimeterFeatures: •600VAC and 600VDC ranges •3400 countdigital display plus analog bargraph •Improved DCbasic accuracy, 0.5% •Resistance to 34M •Continuitybeeper •CAT III 300V and CAT II 600V safety rated•Auto power off Includes: Alligator clip, ground test lead, spare probe tip, installed batteries. Visit www.mcmelectronics.com for complete specifications. Mfr. #DM73C.

Order # (ea.)202-290 $51.95

Component TesterFeatures: •Sort, match, QC inspect and verifycomponents, check circuitswith this full range capacitanceand resistance meter •Dualzero adjustments pots to nullstrays and test leads •Speciallow ohms range •Oversized,read at-a-glance display •Zeroadjust pots for low ohms andcapacitance ranges •Lowbattery indication Includes:Test leads, alligator clips,batteries and manual. Visitwww.mcmelectronics.com forcomplete specifications. Mfr. #CR50A.

Order # (ea.)202-280 $81.95

1000 Amp Digital Clamp-OnsSimple to operate and well-suited for most basic applications. Features:•TRMS (ACD-6 TRMS-PRO only) •AC and DC voltage to 600V •AC current to

1000A •Auto and manual ranging •Relative zero mode •Auto power off •Data hold •Large, easy toread LCD display •Diode test •Audible continuity •Accommodates conductors up to 1.77" (45mm)in diameter •Safety CAT III 600V •Includes: Test leads with set of alligator clips, carrying case,user’s manual •Visit www.mcmelectronics.com for complete specifications.

Order # Mfr. # (ea.)202-345 ACD-6 PRO $79.95202-350 ACD-6 TRMS-PRO 99.95

21


C53_pg_430-431 8/14/08 1:17 PM Page 431

21


21

432 1-800-543-4330Fax 1-800-765-6960

LanRoamer™Category 5Tester/AnalyzerBy incorporating a new advancedmicroprocessor,LanRoamer™provides advancedfeatures like powermanagement,simultaneousmultiple faultindications, selectable tone,fully lighteddetachable remote,and other featuresnormally costinghundreds of dollars.Tests shielded or

unshielded, Cat 5e, Cat 5, Cat 4, or Cat 3cable. Includes a handy carrying case andextender test cables. Features: •Cable testresults displayed on main unit and remoteunit in less than 2 seconds after plugging in cable •Auto-on and auto-off when testingcables •Snap together case for easy storageand convenient patch cable testing •Tonegenerator mode for use with tone tracers,auto-off •Debug mode with from/to andfailures for each pair •Tests for shorts, opens, miswires, reversals, and split pairs•Battery low indicator •Weighs only 5.7 oz.

Order # Description Mfr. # (ea.)72-6890 Tester/Analyzer TP500 $81.2572-6892 RJ-45 to cord adaptor TP50 3.53

LanRoamer™ ProThe LanRoamer™ Pro is a high–performancelength measurement Cat 5 tester. Deliversfeatures found on testerscosting twice as much.Features: •Measurescable length as part ofcable test and as astand–alone function•Tests for shorts, opens,

miswires, reversals, and split pair errors •Identifiesmultiple faults clearly without interpretation •Clearwiremapping form displayed on 2–line, 16 characterLCD display •Auto–off, auto–on, up to 10 times betterbattery life than other testers •One–ended testingwith pre–test mode for fast results. •Built-in tonegenerator with selectable tones and pair capability.The TP600 includes: •Remote #1 •12" cable assembly,RJ-45 to alligator clip set TP40 •12" cable assembly,unshielded RJ-45 conectors, two pieces TP56 •Wireconfiguration sticker •Laminated quick reference card •Pouch PC510. The TP607 kit includes: •TP600•Remotes #1~8 •12" cable assembly, RJ-45 to alligatorclip set TP40 •RJ-45 to coax adaptor, two pieces TP50•12" cable assembly, unshielded RJ-45 connectors, twopieces TP56 •Wire configuration sticker •Laminatedquick reference card •Carrying case PC400

Fig. Order # Mfr. # (ea.)A 72-8295 TP600 $163.29B 72-6895 TP607 kit 273.47

AB

Lil’ Buttie™ Telephone Test SetFeatures:•Small size andlight weight •Toneand pulse dialing•Microphone mute •Lastnumber redial (32 digit)•Continuous line polarityindication (talk or monitor)•Electronic ringer •Amplifiedline monitor for volume levels comparable to “off hook”operation •Modular cordset attachment •Low batteryindicator •Battery powered monitor mode with autopower off on dead lines or when disconnected •TheLB100, LB110 and LB110-BT all include a miniheadset LB40 and metal belt clip

Fig. Order # Description (set)A 72-8040 LB100 with piercing clip set $119.70A 72-6761 LB110 with bed of nails cord set 126.61B 72-8305 LB110-BT with protective boot 132.21

and bed of nails cord set- 72-6763 LB40B replacement headset 16.50

A

High Sensitivity Tone TracerThis tone tracer sets a new standard for field serviceprofessionals. Due to its slim ergonomic design, as well as balanced weighting, this tone tracer is the mostcomfortable tracer available. Used in conjunction withany audio tone generator, it permits wire and cableidentification without having to make direct metalliccontact with the conductor. It can be used with either a wearable headset or a standard cell phone set.Quick-change tips make for easier in-field use.

Order # Mfr. # (ea.)72-6966 TT100 $49.18

Tone and Probe KitA tough cordura kit pouch houses the ToneTracer (#72-6966) and the Tone Generator(#72-6960) for convenience in the field. Aclosure flap protects the instruments andhas both a belt loop on the back as well as a metal clip ring for multiple mountingoptions. The kit includes one cord set with alligator clips.

Order # Mfr. # (kit)72-6968 KP100 $102.97

Tri-Porter™ NetworkQualification and Testing Tool Replace six traditional testers with the firsttriple-play cabling tester, voice/data/video.The ultimate solution with over 50 separatefeatures and capabilities that makes your job of assuring customer’s cabling systemseasier than ever. Combines a world-classspeakerphone butt set with a full networktester that has active network negotiationcapabilities, as well as line testing at100Mbits. Video/coax tests include a unique tone generation technology thattraces signals thru splitters, traps and filtersto find the other end of a cable link. Handlesa full range of physical wiring tests for thefast, efficient delivery of IP-based voice, data and video services for either the home or small office. Network testing: 10Mb or100Mb ethernet. Cable types: Shielded orunshielded Cat 3, Cat 5, Cat 5E, Cat 6; Coax;2-, 4-, 6-pair telephone cabling. Includescarrying case and 20 piece wiremapping set.Mfr. #IVT600. Visit www.mcmelectronics.comfor complete specifications.

Order # (ea.)72-8215 $500.00

Ranger™ DSL-Safe Test SetTest-Um’s most powerful test set, the LB255 incorporates a built-in amplified speaker, and new, advanced features

unavailable on other test sets. Choose from the LB255 which includes the nylon pouch, or the LB255-BT whichincludes the protective boot. Both the LB255 and LB255-BT include a bed of nails cord set LB35 and a mini

headset LB40 Features: •DigiView™ DTMF Decode allows you to see the digits as a dial-out is in progress and capture those digits •ADLI™ Auto Dial Line Identification, inbound and outbound line identification with caller ID testing•Trafixguard™ senses digital lines and identifies under and over voltage conditions.Totally DSL safe. •Insta-Talk™ Amplified speaker with simultaneous intercomcapability for talking while testing. Speaker features three volume levels •Enhancedmemory dialing, alpha and numeric capability •8 number memory •Tone and pulsedialing •Auto power-off eliminates dead batteriesA

B

Lil’ Buttie™ PRO Telephone Test SetFeatures: •Small size and lightweight •Five number memory•Technical support numberprogrammed into memory dial •LCD display shows: On-hookvoltage, number dialed, off-hookcurrent, set-up info, storednumbers, continuous polarityindication, battery condition,caller ID, call waiting/caller ID,caller ID errors •Tone and pulsedialing •Microphone mute •Last

number redial (19 digit) •Electronic ringer•Amplified line monitor for volume levelscomparable to “off hook” operation•Modular cordset attachment with bed of nails clips •Auto power off eliminatesdead batteries •The LB220 and LB220-BTinclude bed of nails cord set LB35, mini headset LB40, and two-piece belt clip LB60

Fig. Order # Description (set)A 72-6762 LB220 telephone test set $166.11B 72-8310 LB220-BT telephone test 172.39

set with protective boot- 72-6763 LB40B replacement headset 16.50

B

A

Fig. Order # Mfr. # Includes (ea.)A 72-7885 LB255 Nylon pouch LB80 $252.99B 72-8300 LB255-BT Protective boot LB81 258.69

B

C53_pg_432-433 8/14/08 1:18 PM Page 432

21

NET 30Terms


21


Deluxe Resi KitIncludes: •Resi-Tester™TP300 •Resi-Tracer™TT300 •Resi-Toner™TG400 •Resi-Talker™LB300 •Remote #1 TP309•Coax Remote Indentifier #1TP65 •12" cable assembly, RJ-45 to alligator clip set TP40•Cord set with alligator clipsTG10 •Alligator clips cord setLB31B •Coax wiremapper set, 20pieces TP311 •RJ-45 wiremapper set,20 pieces TP312 •RJ-11 wiremapper set,20 pieces TP314 •7.5" cable assembly with no-fault RJ-12 connectors for RJ-11 and RJ-45 jacks, twopieces TP20 •24" RJ-45 cable assembly with eight alligatorclips, two pieces TP68 •Zippered tool case TK200

Order # Mfr. # (kit)72-7895 KP312 $451.54

Testifier™All Cable TesterCondition: Shows opens, shorts, miswires,split pairs, PASS and FAILresults fast, on a clear, fullalpha/numeric LCD display.Location: Supported bythe most comprehensiveset of wiremappinglocators in the world. Upto 20 cable end locationsat a time can be identifiedand tagged. Position:The built-in tonegenerator is the mostflexible and function-packed tonegenerator you will ever use. Its configurablesignal can be generated to find and fix theposition on any type of cable, either exposed or hidden, in ceilings or behind walls.Includes: TP309: Resi-Tester™ #1 terminatorTP65: Replacement #1 coax remote identifierTP40: 12" cable assembly, RJ-45/alligator clipsTP20: 7.5" cable assembly, instruction manual

Order # Mfr. # (ea.)72-8035 TP350 $105.96

CoaxMapperThis handytester isdesigned forCATV andsecuritycameraconnectionandinstallation. It testsmulti-runcoax cablesterminated with “F” connectors from a centralsource. It has the ability to put a tone signalon a coax cable, as well as find and identifymultiple coax cables connected to a coaxsplitter. Individually identified testterminators allow you to trace up to fourconnections at a time from the main cable box.Features: •For CATV and security cameracoax connection testing and installation•Finds and identifies multiple coax cables•Includes four color-coded “F” connectors andBNC adaptors •Built-in tone generator

Order # Mfr. # (ea.)72-7500 CX200 $42.74

Resi-Tracer™ Tone Detector and Cable FinderResi-Tracer combines unique newfeatures for tracing telephone,network, coax and audio cablewith special functions for findingand phasing speakers andtesting telephone systems.Features: •Traces all types of cable: Cat 5/6, telephone,coax •Audible and visualtone location indication•Senses Speaker Phasingwhen used with Resi-Toner™, MCM #72-7550•Traces coax cable onactive systems to eliminateshutdowns •POTS testing with monitor mode and off-hook listening mode. Includes: Round tip TT30

Order # Mfr. # (ea.)72-7890 TT300 $84.71

Resi-Tester™The Resi-Tester™ is the firstidentifier and verification testerdesigned exclusively for all thewiring environments found in homenetworking and home automation.CATV, telephone systems, audiocable, security/alarm wiring, andnetwork cabling can all be testedand located using the Resi-Tester™and optional room identifier sets.Multiple input ports and includedadaptor cables mean anywire can be attached andtested.

Resi-Tester™ displayscabling results using a largeeasy-to-read LCD with clear concise information showingall the faults connected with the various cable types. Itwarns of voltage on lines and shows a “pass” or “fail”message after each test.

The built-in tone generator sends a signal down installedwires, so that they can be traced in the walls and theirexact terminus identified. The built-in remote will identifyindividual outlets including phone, cable or data network.Using the optional multi-identifier sets (#72-7560), the usercan verify connections on up to ten coax outlets and eightpaired cables simultaneously for wire-mapping the largestjobs easily and efficiently.

Order # Mfr. # Description (ea.)72-7555 TP300 Resi-Tester™ $105.9672-7560 TP310 Coax remote identifiers 27.93

(set of ten)

Resi-Talker™ Test SetTest-Um’s most economical test set for basictelephone system work •Tone and pulse dialing•Microphone mute •Last number redial, 32digits •Continuous line polarity indication (talkor monitor) •Electronic ringer •Amplified line monitor for volume levels comparable to “offhook” operation •Modular cord set attachment•Low battery indicator •Battery poweredmonitor mode with auto power off on deadlines or when disconnected •Includes LB31B:48" cord set, instruction manual

Order # Mfr. # (set)72-7990 LB300 $93.22

Trace-Rite™ Trace and Tone Detector SetFeatures: •Built-in tone generator with two different tones and auto-off feature •Tone generator includes a replaceableround tip •Find cables behind wallsand ceilings •Ideal for residential orcommercial use •Traces all types ofcable: Cat 5/6, telephone, coax•Exceptional signal acquisitionsensitivity •Audible tone location indication•Identify cabling without damaging its insulation•Batteries included •Visit www.mcmelectronics.com for complete specifications •Mfr. #TT250

Order # (set)72-8290 $45.96

Net-Rite™Ethernet Cable TesterEasy to use and easy on yourbudget! Features: •No buttons,auto-off, auto-on •Just plug in anethernet cable to the main unit and remote-it is tested for opens, shorts, split pairs, miswires and reversals•Removable remote enables testing longer cable runsterminated in different areas •Tests up to 1000' •Full LCD display shows all test information clearly •Showscable faults per TIA568 specifications •Batteries included•Visit www.mcmelectronics.com for complete specifications

Order # Mfr.# (ea,)72-8285 TP250 $45.96

Resi-Toner™This full function tone generator isdesigned to further test connections on telephone systems and speakerinstallations. Find your outlets andassure your connections with the Resi-Toner™. Features: •Powers upthe installed telephone lines underactual load conditions with a simulateddial tone to check connectivity andproper wiring configurations without a service connection •Full feature tone generator with three differenttone sounds and continuity test•Generates a unique tone sequence for testing speaker installations by“popping” speakers-will work witheither AC or DC coupled speaker types •Requires 9V battery #293-275(not included)

Order # Mfr. # (ea.)72-7550 TG400 $74.12

Turbo-Tone™Features: •Extra long

distance capability up to 20 milesaway •Constant amplitude output

for 100% signal strength all thetime, no signal decrease as

battery discharges •Easily hear signal through walls

and enclosures •Multipletones and power levels

for all applications•Unbalanced tone modefor longer distances on

CAT 5 cables •Auto-off forbattery conservation •Full talk

battery and constant polarity check included •Includesadaptor cables and carrying case

Order # Mfr. # (set)72-6962 TG200 $66.60

C53_pg_432-433 8/14/08 1:19 PM Page 433

21


21

1-800-543-4330Fax 1-800-765-6960

Wi-Net Window Wireless TesterDesigned for installers and owners of wireless networks to identify,clarify and configure all the wirelesstransmission equipment on a site.Prevents conflicts of internet accessover wireless points and gives a clearpicture of the range and availability ofeach wireless access point. Features:•Signal strength shown as both apercentage on the LCD and a light bar up to 100% •Equipment name and channel of transmission identified•Identifies and communicates withIEEE 802.11 wireless access points

types b and g •Lists and logs all receivedwireless transmissions in the area for review withconstant scanning •Displays encryption condition oneach wireless component •Lists signal as either anaccess point or an ad-hoc or twin network type •Pingfunction accesses IP addresses and determines aninternet link condition •Negotiates with networkDHCP for component identification and IP/MACaddresses •Works on four alkaline or rechargeablebatteries (not included)

Order # Mfr. # (ea.)72-8195 WP150 $266.71

LanScaper™ KitThe LanScaper™ kit takes Test-Um’sLanScaper Network Tester to the next level.This kit comes complete with everything youneed to test, trace and tune your networksystem. Includes: •LanScaper NT700•Remotes #1-#8 •Tone Tracer TT100 •12"cable assembly, RJ-45 to alligator clip set, twopieces TP40 •12" cable assembly, unshieldedRJ-45 connectors, two pieces TP56 •RJ-45 to“F” connector, two pieces TP50 •7.5" cableassembly with no-fault RJ-12 connectors for RJ-11 and RJ-45 jacks, nine pieces TP20•Carrying case PC400

Order # Mfr. # (kit)72-7605 NT750 $430.77

LanScaper™ Network TesterAs a Physical Layer NetworkManagementDevice,LanScaper™combines the functions of a high-end cable tester and length measurement device with thecapability to monitor and correct network problems connectedwith the physical layer and link conditions of the network. It isa must-have tool for keeping networks performing efficiently.Features: •Identifies port services including ethernet, ISDN,POTS, and token-ring while reporting such crucial informationas network speed, capability, and location of other networkdevices •Pinging function verifies connectivity to networkdevices and queries PC/NICs •Detects legacy “PhantomPower”, reports current and voltage capability of analogtelephone lines, identifies (maps) remotes while cable testing •Comes in a complete kit with adaptor cables, remote identifiers and tone tracing equipment necessary for any network evaluation application.

Order # Mfr. # (ea.)72-7600 NT700 $317.97

HF/VHF SWRAnalyzer w/RFResistanceMeterDiagnose a wide range of antennaproblemsinstantly, withone easy-to-useinstrument.Rugged unitcombines fourtest instrumentsin one: Anaccurate RFsignal generator,

a high resolution170MHz frequency counter, RF ResistanceMeter and SWR Analyzer. Gives you a completepicture of your antenna’s performance anywherebetween 1.8~170MHz, even outside the HAMbands. Set the bandswitch and tune the dial justlike a transceiver. SWR and RF resistance areinstantly and simultaneously displayed on side-by-side meters. You can find your antennas trueresonant frequency, tune the antenna's on yourtower and watch SWR change instantly, as youmake each adjustment. Tune critical HF mobileantennas in seconds, without subjecting yourtransceiver to high SWR. Measure yourantenna’s 2:1 SWR bandwidth on a single band,or analyze multiband performance over theentire spectrum from 1.8~170MHz. Measureinductance, capacitance, resonant frequency of tuned circuits, transmission line velocityfactor/impedance/loss. Test RF chokes,transformers, and baluns. Adjust your tuner for a perfect 1:1 match without creating QRM.Requires 12VDC, operates on eight “AA”batteries. Rugged all metal cabinet measures 4" x 21⁄2" x 63⁄4".

Order # (ea.)111-2945 $260.00

Hand Held Signal Level MeterFeatures: •Measures NTSCsignals: CATV CH: 2~136, Off-Air: 2~69 •Wide input dynamicrange: -28~+55dBmv •Readsvisual and aural carrier levels•Direct channel or frequencymeasurement: For use with other

RF signal applications •Groupchannel selection: For quick system

tests just toggle and read only thefavorite channels •Audible auralcarrier •Auto shut-off time selection•Memory to store data •Chargingstatus LED •16x2 LCD display withbacklight. Specifications: •Range:46~870MHz in 10KHz steps •Levelrange: -28dBmV~+55dBmV •Maxchannel scan: 135 channels •Scanrange: All frequencies 46~870MHz•Dimensions: 214mm x 94mm x47mm •Accuracy: ±2.5dB •Input

impedance: 75ohm •Scan speed: 30channels/minute •Memory groups: 12 groups (01~12) 135 channels. Includes: Rechargeable Ni-MH batterywith five hours of continuous operation, battery charger,carrying case, barrel connector and owner’s manual.

Order # (ea.)72-8145 $462.00

Digital Signal Level MeterFeatures: •Frequencyrange continuous from46~860MHz •Programmedchannels for CATV CH2~135 and TV CH 2~78 or10KHz increment frequency

selection •LCD graphicdisplay with back light•Displays audio and videocarrier levels •Single channelspectrum mode displayschannel flatness, inband andLSB levels •Full spectrumscan mode displays all video carriers •–40dBmv to +60dBmv dynamic range•Direct channel or frequencyentry •Self calibrating •±1dBaccuracy •FM demodulatorprovides audio output •Low battery indicator•Autoranging attenuator

•Auto power off •Adjustable volume control•Includes rechargeable NiMH batteries, AC charger,carrying case and owners manual •Mfr. #ST5128

Order # (ea.)72-6703 $973.00


Round Analog Panel MetersThese meters are especiallysuited for applications requiringhigh durability at low cost.Features: •Rugged steel backs •U-clamp flush mounting•Fade proof lithographed metaldials •Glass fronts •Magnet

movement •Dimensions: 2" (D) x 1.5" (D) •Accuracy: ± 5% •1 year warranty

Order # Mfr. # Range (ea.)72-7047 640 0~15VDC $22.9572-7048 640 0~50VDC 28.95

Low Current IndicatorIdeal for checking low current applications such as, accessories to electricalsystem or low voltage leaks.Features: •Induction typerequires that the cable beplaced in slot frame on therear of meter case, no

electrical connections or leads to hook up •Range:30~0~30ADC •1 year warranty •Mfr. #763

Order # (ea.)72-7043 $20.15

434

C53_pg_434-435 8/14/08 1:19 PM Page 434

21

NET 30Terms


21


Model 9045 True RMS Autoranging DMM•6000 count display •61 segment bargraph •Blue backlitLCD •DC voltage ranges to1000V •AC voltage ranges to750V •AC/DCcurrent ranges to 10A•Resistanceranges from600Ω~60MΩ•F° and C°selectable temperature test•Capacitance rangesfrom 40nF~4000µF•Frequency ranges from9.999Hz~9.999MHz •Duty cycle •Diode test•Continuity test •Safety designed to comply with IEC 1010-1 •CAT III 600V/CAT II 1000V rated •Overload protected •Three year warranty•Includes: Safety test leads with screw-on alligatorclips, thermocouple probe and 9V battery

Order # (ea.)74-340 $101.00

WireMaster XR-2 LAN Cable Test Set With Tracer Tone •Verifies point-to-pointwiring of twisted pair LAN cables •Checks forcontinuity in straight-through or reverse wiring•Eight LEDs identify thesource and destination of each conductor •Directconnection of 8 pin RJ-45 or 6 pin RJ-11 cables•Generates two distincttones usable for cabletracing •Allows remotetesting of cable runs up to1000' •Telco protected •Longbattery life •Carrying case included •One year warrantyUser selectable features: •RJ-11 four conductor or sixconductor •Forward or reverse sequencing on transmitter•High or low pitch tracer tone •Fast or slow LEDsequencing Input/output protection: •Will withstand56V with 400ohm series resistance applied across theoutputs •Will withstand 175V peak with 100ohm seriesimpedance superimposed onto 56VDC for 100mS (standardTelco signals) General: •Cable types: RJ-45 8 pin, RJ-11 6 pin conductor, RJ-11 6 pin 4 conductor, straight-throughor reverse wiring •Output tone: Approx. 5V peak to peaksquare wave •Power requirements: 9V alkaline (#292-035)not included •Dimensions: 1" x 23⁄8" x 35⁄8" •Weight: 5 oz.approx. (without battery) •Mfr. #3254

Order # (ea.)74-080 $93.95


Model 9005-A DMMFeatures: •31⁄2 digit,1999 count •1.15" high digital display •Manualranging •DC voltage to1000V •AC voltage to750V •AC and DC current to 10A•Resistance to 200Mohm •Continuity test •Diodecheck •Transistor check •Overload protection •IEC1010-1 CAT I, II and III rated •Data hold •Includesred rubber boot, test leads with screw-on alligatorclips and owners manual

Order # (ea.)74-234 $49.00


Model 2030-C Autoranging Pocket-Sized DMM•Hard protective case opens to form stand•33⁄4 digit, 4000 count•AC/DC volts to 600V•AC/DC current to 400mA•Resistance to 40MΩ •Cat II600V rating on voltage ranges•Capacitance test to 100µF•Frequency range to 10KHz •Duty cycle •Diode check•Continuity beeper •Relative mode •Data/range hold •Auto power off •Low battery indicator

Order # (ea.)74-280 $24.00


Breaker Identifier•Micro-processor controlledreduces false readings •Fully automatic no adjustmentsnecessary •120/220VACtransmitter (250VAC max) •Audible andvisual indication •Auto power off batterysaver •Uses standard 9V alkaline battery(#293-275) •UL listed

Order # (ea.)74-260 $53.00

WireMaster RJ-45•Verifies point-to-pointwiring of RJ-45 patch cables •Eight LEDs identify the destination of each conductor in cable •Checks for continuity instraight-through

wiring •Cable types: AT&T 258A, EIA/TIA T568A or T-568B, TP-PMDand any RJ-45 cable •One year warranty

Order # (ea.)74-020 $41.00

TDR Cable Fault FinderThis hand–held digital cablelength meter /TDR fault locator is designed to both measure thelength of copper communicationcables and distance to a fault.Identifies opens and shortcircuits, and directly indicatesthe fault distance on thealpha–numeric LCD. Meter hasan internal library of 39 standardcable types. Incorporates anoscillating tone generator,detectable with a standard toneprobe for use in tracing andidentifying pairs within a cable.Specifications: •Approximaterange: Coaxial cable (6400'),structured wiring (2500'), telephone cable(2500') •Accuracy: ±3% on cables longer than 200', ±5' cables 10'~200', ±2' cables up to10' •Output impedance: 50, 75, and 100ohm•Velocity of propagation: 0~99% •Connectortype: BNC •Safety: IEC61010, EN60950•Includes padded cordura holster, test leadadaptor w/alligator clip, and 9V battery

Order # (ea.)74-240 $199.00


WireMasterCoax 8-WayCoaxial CableMapper•8 remoteswith BNCconnectorsincluded •Tests for opens andshorts •AC/DCovervoltage warning LED•120VAC line cross protection •Real-time testidentifies intermittents •Power latch functionswitch prevents accidental turn-ons •Identify any pair of wires (shielded or unshielded) such asaudio, video and phone lines using appropriateadaptors •Battery self test •Ideal for CCTVsecurity and surveillance systems, broadcast TV, residential video systems, cable TV (with “F” adaptors) •Uses one standard 9V battery, not included •Includes carrying case and BNCmale-to-male adaptor •Mfr. #3274

Order # (ea.)74-325 $39.95

CableRater, dB Loss MeterYou’ll not finda meter withthese featuresat this price. A must for your tool box!Features:•Measures dB loss and gain in cable distribution systems •Verifyinstallation before cableTV service is connected•Transmitter simulatesfrequency and level of TVchannel 3 •Check for: badcables, bad splitters, badswitches, bad connectors/connections, badamplifiers/verify amplifier gain, excessive loss in cable (too long) •Visit www.mcmelectronics.com for additional specifications

Order # (ea.)74-345 $169.00

435

C53_pg_434-435 8/14/08 1:20 PM Page 435

21


21

436 1-800-543-4330Fax 1-800-765-6960

Mini AC Clamp-On MeterPerfect tool for the professional or do-it-yourselfer. Compactsize, easily fits in your shirt pocket. Features: •AC currentclamp-on •Simple, one button operation •Measures from0~200A AC in two ranges •Large, 33⁄4 digit, 4000 count display•Autoranging •Data hold •Overload indication (@400A) •Auto power off •Low battery indication Includes: •Two 3V batteries, carrying case and wrist strap •Mfr. #9200

Order # (ea.)74-315 $39.95

Fox and Hound 3 Probe KitIncludes original Fox tonegenerator, Hound3 probe inductivetracer andcordura carryingcase. Mfr. #3397.

Order # (ea.)74-335 $93.95

Sniff-It 2Non-Contact, AC Voltage Detector•Features adjustable sensitivity control from5~600VAC •Light flashes and beeper chirps when ACvoltage is present •Flashes and beeps faster as ACvoltage is approached •Pocket sized •Powered by one A23 battery, included •5 year limited warranty•Mfr. #9601

Order # (ea.)74-305 $17.95


Line-Bug 4Phone/LAN Line Tester•Tests standard telephone jacks and LAN jacks for connection to telephone system •Checks LAN lines(RJ-45) wired to 568 A/B standardfor damaging telephone line current•Has RJ-11 and RJ-45 style plugs•Four tri-color (red/green/amber)LEDs indicate current, polarity and ringing/AC voltage on each line •Tests single line, 2 line, 3 line, 4 line jacks to USOC (telephone) standard

Order # (ea.)74-295 $8.95

Sniff-It Non Contact AC Voltage Detector

•Detects AC voltage without making contact•Sensitivity from 30~600VAC •Light flashes and beeper chirps when AC voltage is present •Powered by one A23 battery, included •Five year limited warranty •Mfr. #9600

Order # (ea.)74-222 $11.95

YEAR LIMITED5 WARRANTY Plug-BugGFCI ReceptacleTester•For use on110~125VAC receptacles•Detects common wiringproblems in standardand GFCI outlets •Totest, simply plug into

receptacle and observe the light pattern •Push theyellow button to test operation of ground fault receptacle

Order # (ea.)74-300 $7.39

Tracker 2700 and 2700SThe Huntron Tracker 2700 extends thecapabilities of the popular Tracker 2000 totroubleshoot low voltage logic circuitry. Itslow voltage ranges also make it ideal fortesting passive devices such as high valuecapacitors while still in-circuit. Features:•Troubleshoot low voltage circuitry withoutthe possibility of exceeding manufacturersspecifications •The Tracker 2700S scansand compares up to 40 pins per channel

using standard IC clips and cables;comparison takes place manually orautomatically allowing you to pick out thesignatures differences quickly •FeaturesHuntron SigAssist™ for display of signatureresistance, capacitance, and breakdownvoltage •Test gate-fired devices with a built-in DC voltage source •High resolutioncolor LCD for signature and menu display•Individually select source voltage, sourceresistance, and test frequency to create

over 100 range combinations Powerrequirements: 115VAC~230VAC, 50/60Hz.Dimensions: 11.5" (W) x 4.5" (H) x 10.8" (D).YEAR LIMITED1 WARRANTY

A

B

MP10 and MP20 MicroprobesFeatures: •Insulation right down to the needle-sharp stainless steel tips •Durable sharp points to keep the microprobes where you want them •Kynar electrode coating with insulation to protect againstaccidental shorting •Patented adjustability and slip design to avoidobstructing your view of circuits and components under test •The MP10has standard banana plug connectors •The MP20 has safety shroudedbanana plugs (suitable for use with most DMMs)

Fig. Order # Mfr. # (ea.)A 72-6194 MP10 $26.95B 72-7915 MP20 26.95A

B

Gale CorporationPocket Toner CATV Cable TesterAn essential tool for every CATV technician to confirm continuity and check for short circuits orsplitters on coaxial cable. LED light indicates a short-circuit or splitter in the test line. Audio tone identifiesline carrying signal. Features: Works with coaxialcable with replaceable push-on “F” type connector atthe top of the sending unit head, ergonomic pocket-sized test tool with right-angle head for getting intotight areas, speed-toning threads on toner unit makestesting large cable bundles easy without the need tothread the toner into every cable connector, includesone standard “AAA” battery. Mfr. #PT1-S.

Order # (ea.)72-7565 $26.95

Gale CorporationPocket Toner 2® PROPocket-sized tool fortoning, tagging andidentifying cablesused in CATV, LAN, security, electrical,telco and audio/videoinstallations.

Includes RJ-45 adaptors. Features: •Adaptors for 66 Block check, F-RJ-45, F-RJ-11, alligator clips,RCA (male/female), F71, F81 and BNC (male/female)•Bicolored LED lamp-red indicates a short or devicein-line, green indicates a 75ohm or 50ohm termination•Main body connector provides a secure connection forthe various adaptors •Includes the above adaptors,carrying case, battery and owners manual

Order # (ea.)72-6744 $86.95


Fig. Order # Mfr. # (ea.)A 72-6990 2700 $2673.00B 72-7905 2700S 3599.00

C53_pg_436-437 8/14/08 1:21 PM Page 436

21

NET 30Terms



Hand HeldOscilloscope

and FREE Tool BagTreat yourself to a free large tool bag when you purchase Velleman’s user-friendly, feature-packed HPS40oscilloscope. Features: •Low noise, high sensitivity, modest weight, a backlitLCD, choice between regular batteries orrechargeable ones •Select from five differentscreen layouts •Fast and fully automaticset-up function •Perform measurementswithout physically touching the unit •Ideal for the professional user, servicecenter and hobbyist. Specifications:•40MHz sampling rate •12MHz analog bandwidth •0.1mV sensitivity•5mV~20V/div in 12 steps •50ns~1 hour/divtime base in 34 steps •Adjustable triggerlevel •X and Y position signal shift •DVMreadout •Audio power calculation (RMS and peak) in 2, 4, 8, 16 and 32ohm. See additional specifications atwww.mcmelectronics.com. Includes: •User manual, flexible carry protectionholster, insulated safety probe, RS-232connection lead (to DB-9), rigid carry case.The tool bag, a $25 value, features fivecompartments and double layers of rugged,lightweight nylon, (tools not included). Dimensions: 15" (L) x 71⁄2" (W) x 12" (H)

Order # Description (ea.)72-8125 HPS40 and free tool bag $318.00

Digital Humidity andTemperature Meter•Display: LCD with backlight •Sensor type:Humidity: Precision capacitance sensor, temperature: thermistor (head) and type K thermocouple •Measurement range:Humidity: 0%RH~100%RH; temperature: -20°C~60°C (-4°F~140°F) •Accuracy: range5%~95%RH: ± 3.5%RH (at 23°C ± 5°C);range -20°C~60°C: ± 2.5°C; range -4°F~140°F: ± 3.5°F •Response time: 180ms •Sample rate: 2.5 times/second•Polarity: Automatic, with negative polarity indication •Overload indication:“OL” •Resolution: 0.1%RH, 0.1°C, 0.1°F•Operating conditions: 0~50°C (32~122°F);<80%RH non-condensing •Storageconditions: -10°C~60°C (14~140°F);<80%RH non-condensing •Auto power off:Device shuts down automatically if no key is pressed for 15 min. •Battery: 9V (6LR61)battery, included •Dimensions: 225 x 45 x34mm •Weight: 200g

Order # (ea.)72-8085 $103.20

Hand Held Oscilloscope and FREE Compact DMMWhat a deal! Purchase Velleman’sHPS10 or HPS10SE and receive a free compact DMM, a $16.00 value. Both oscilloscopesfeature high sensitivity, down to 0.1mV/div, extended scope functions and extreme value for the money makingthem ideal for hobby, service, automotive and developmentpurposes, and for educational use in schools and colleges.For a step-up, purchase the HPS10SE which features a blue LCD, white backlight and includes a rigid carry case.Specifications for both scopes: •10MHz sampling rate•Up to 2MHz analog bandwidth •5mV~20V/div in 12 steps•200ns~1 hour/div time base in 32 steps •Full auto set-up•Trigger mode: Run, normal, once, roll, slope +/- •X and Yposition signal shift •Power supply: Five 1.5V “AA” batteryor Nicd/NiMH (not included) •Includes battery chargingcircuit. Visit www.mcmelectronics.com for additionalspecifications. The compact DMM features: •Automaticpolarity function and 31⁄2 digit LCD display •Measurements:DC current up to 10A, AC and DC voltage up to 600V,resistance up to 2Mohm •Diode, transistor and continuitytest with buzzer •Data-hold function and backlight

Fig. Order # Description (ea.)A 72-8130 HPS10 with free DMM $159.00B 72-8120 HPS10SE with free DMM 193.00- 72-6512 AC adaptor 7.09- 72-6514 Oscilloscope probe 19.95- 72-6998 Leather carry case for HPS10 18.95

A

B

Cable Tracker withTone GeneratorFeatures: •Consistsof a tone generatorand a probe•Determine where a cable is going andwhether or not (andwhere) the cable isinterrupted •Signalviewing in 3 modes:Lamp (L), speaker(SP) or both (S&L)•Tone generator output (square waveform): Single (900Hz)or dual (900~1000Hz) •Includes soft carrying bag. Tonegenerator specifications: •Working voltage: 9VDC ±15% •Working current: 10mA (intermittent tone)/20mA(continuous tone) •Output wave form: Square wave signals±10V pp •Single audio frequency: ± 900Hz •Dual audiofrequency: ± 900Hz~1000Hz •Dimensions: 4.5" x 2.4" x 1.1"•Weight: 130g. Probe specifications: •Working voltage:9VDC ±15% •Working current: 25mA (L)/80mA (max SPvolume)/100mA (max S&L volume) •Max receptionsensitivity: > 30mV •Maximum output volume: ±120dB•Dimensions: 8.1" x 1.6" x 1.5" •Weight: 80g

Order # (ea.)72-8090 $53.60

Analog Sound Level MeterFeatures: •7 sound level ranges:50~126dB •A and C weighting for sound analyses •Fast/slow responseallows intermediate and high levelmeasurements •RCA output jack.Specifications: •Positions: 60, 70, 80,90, 100, 110, 120dB •Load impedance:1Kohm min •Distortion: < 2% at 1KHz,0.5V •Microphone: Electret condensermicrophone, omnidirectional,directionality increases at higherfrequencies •Precision: ± 2dB at 144dB •Output signal: Max 1V deviationat 1KHz for the entire range •Powersupply: One 9V battery, included •Battery test: OK indication between 7 and 10.5V •Battery life: 110 operating hours (alkaline batteries) •Dimensions: 6.3" x 2.4" x 1.7" •Weight: 185g

Order # (ea.)72-8095 $43.80

Compact DMM with Backlit DisplayFeatures: •31⁄2 digit LCDdisplay •Measurements: DCcurrent up to 10A, AC/DCvoltage up to 600V, resistanceup to 2MΩ •Backlit display•Diode, transistor, andcontinuity test with buzzer•Automatic polarity function•Data hold function •Includesprotection holster

Order # (ea.)72-6970 $18.95

Pocket Audio Generator KitFeatures microprocessortechnology and digital waveformgeneration. Specifications:•Sine wave: 50Hz, 100Hz, 1KHz,10KHz, 20KHz •Burst: 50Hz, 100Hz, 1KHz •Burst mode:20ms ON, 500ms OFF •Noise: 32 bit digital pink noise•Output level (10Kohm): 0~775mV (0dB) •Outputs: 2 xRCA (cinch) •Power supply: 2 x CR2016 or CR2025 battery(not included) •Dimensions: 3.4" x 2.0" x 1.0"

Order # (1-3 kits) (4 kits-up)80-6655 $36.40 $33.09

Compact Switching Power SupplyFeatures: •Switch modedesign for high power in alightweight, compact size•Selectable outputvoltages of: 3V, 4.5V, 6V,7.5V, 9V and 12VDC•Current capacity of:1.5A@ 3~6VDC, 1.2A@ 7.5VDC, 1.0A@ 9VDC, .75A@12VDC •9VA maximum output •Short-circuit and overload protection •Power requirements: 100~240VAC, 50/60Hz•Includes 6 selectable output jacks

Order # (ea.)72-6773 $21.33

IncludesFREE

Compact DMM!

21Includes FREE

Tool Bag!

C53_pg_436-437 8/14/08 1:22 PM Page 437

21


21

438 1-800-543-4330Fax 1-800-765-6960

Test Lead Holder•For most patch cords and cable assemblies•Conveniently holds test leads for instant selection•For cable up to 5⁄16" diameter •Mfr. #4408

Order # (1-4) (5-up)201-028 $9.13 $8.46

DMM Test Lead Kit•Extra durable •48" longsilicone wire •10A 1000VRMS •Kit: One black, one red


Low Cost TestLead KitKit contains twoeach (one black,one red): Testprobe leads on PVC insulated 18AWG wire, slide-onextended tips and alligator clips. Supplied in areusable plastic case. Mfr. #5672A.


PrecisionElectronic Probe Sets•Kit contains apair (black/red) ofprecision electronicprobes •48" leadlength •Five pieceset of .040" dia.replacement tips (sold separately listed below)•Conforms to IEC1010-2-031, 1000V CAT III

Order # Mfr. # Description (1-4 sets)201-119 6275 Probe Set with Stainless Tips $17.53201-120 6342 Probe Set with Gold Plated Tips 19.98201-121 6354 5pc Replacement Tip Set 18.04

Test Probe withScrew-OnAlligator Clips•Test probe has a stainless steelsharp tip with 8/32 threaded base •Alligator clipscrews onto probe tip, eliminating accidental testprobe and alligator clip separation •Test leads fit all standard DMMs with safety style banana jacks•Silicon insulated 4' (1.2m) test leads with rightangle DMM plugs •Comfort-grip textured surface •Wide temperature range of 14°F~212°F (-10°C~+100°C) •Complies to International SafetyStandard IEC 1010-2-031 •Includes two screw-onalligator clips

Order # Mfr. # (1-4) (5-up)201-123 6723 $33.45 $31.03

Ten Piece Minigrabber® Test Clip Patch Cord Set•One of each of the following colors: Black,brown, red, orange, yellow,green, blue, violet, grayand white •24" length•20AWG wire •45VAC, 5A rating •Mfr. #5523

Order # (1-4 sets) (5 sets-up)201-110 $38.71 $35.90

Deluxe Test Lead Kit forElectronicsKit contains:•Two each(one black, one red)probehandles, medium alligator clips,minigrabberleads, minipincer leads, slide on IC tips, slide onextended tips, pup jack leads, and two spade lugs all in a nylon pouch


Extendable Tip Probe toMultimeter PlugSet includes oneblack and one red 48" silicone insulated test leads. Mfr. #5953A.

Order # (1-4) (5-up)201-078 $22.39 $20.77

100MHzOscilloscopeProbe Kit•Use with anyscope up to100MHz •Flexiblecable •Switchable from x1~x10 •Rise time: x1,35nsec x10, 3nsec •Maximum input V: 600•Compensation range: 10~60pF •Bandwidth: 1x (15MHz) x10 (100MHz) •Mfr. #4550B


Alligator Clip Patch Cord•Alligator clip to alligatorclip patch cord •Nickelplated clip •18 gauge wire•PVC insulated •Rated at 5A

Order # Mfr. # Color Length (1-4) (5-up)201-032 AL-B-36-0 Black 36" $5.09 $4.72201-034 AL-B-36-2 Red 36" 5.09 4.72201-033 AL-B-48-0 Black 48" 5.91 5.48201-035 AL-B-48-2 Red 48" 5.91 5.48

Test Lead Wire with Silicone or PVC Insulation•Create test leads, jumperor patch cords for yourown specific needs withthis do-it-yourself leadwire •50' (15.2m) of unterminated 18AWG test lead wire •Choose fromheat-resistant silicone or PVC insulation in eitherblack or red •Very flexible with 65 strands of 36AWGtinned cooper conductor •Wide temperature range of -58°F~302°F (-50°C~150°C) with PVC insulation•Same wire as used with Pomona test leads and patch cords •Designed for use with Pomona “Do-It-Yourself” banana plugs, MCM order #201-128, 201-129, 201-130 and 201-131

Order # Mfr. # Insulation Color (1-4) (5-up)201-124 6733-0 Silicone Black $18.76 $17.41201-125 6733-2 Silicone Red 18.76 17.41201-126 6734-0 PVC Black 10.39 9.64201-127 6734-2 PVC Red 10.39 9.64

Do-It-Yourself4mm Banana Plugs•Build your own safety stacking leadswith do-it-yourself safety-sheathed 4mm stackable and right anglebanana plugs •Simple assembly •Complies toInternational Safety Standard IEC 1010-2-031Material: •Contacts: Nickel-plated brass•Insulation: Lucel acetal polymer •Temperature:14~176°F (-10~+80°C) •Designed for use withPomona “Do-It-Yourself” test lead wire (silicone orPVC), MCM order #201-124, 201-125, 201-126 and 201-127

Order # Mfr. # Type Color (1-4) (5-up)201-128 6721-0 Stackable Black $4.48 $4.16201-129 6721-2 Stackable Red 4.48 4.16201-130 6729-0 Right angle Black 4.03 3.74201-131 6729-2 Right angle Red 4.03 3.74

Replaceable TipLead to StackingBanana Plug KitKit contains two each: Testprobe PVC leads, alligator clips, one black and one red, and dog legmicro tips. Mfr. #5325A.


Test Clip to StackingBanana Cords•Minigrabber test clip to stackable banana plug•Simplifies circuit connections •36" 20 gauge wire•Rated at 3000W VDC, 5A

Order # Color (1-4) (5-up)201-016 Red $5.40 $5.01201-015 Black 5.40 5.01

SMD MicrotipTest Probe•Probe for SMD contacts •Flexible curved tip for the hard to reach places

Order # Color (1-4) (5-up)201-060 Black $12.64 $11.72201-061 Red 12.64 11.72

C53_pg_438-439 8/14/08 1:23 PM Page 438

21

NET 30Terms



Standard DoubleBanana Plug

•Set screws firmly secures leads •Simplifies cableconstruction •Stackable plugs are mounted on 3⁄4"centers •Rated at 5000W VDC, 15A

Order # Mfr. # Color (1-4) (5-up)201-004 MDP-2 Red $2.54 $2.36201-003 MDP-0 Black 2.54 2.36

BNC Female to DoubleBanana Plug•Permits BNC male cableto be used with equipmenthaving banana jacks •Stackable banana plugs are mounted on 3⁄4" centers •Rated at 500V RMS •Nominal impedance: 50ohm

Order # (1-4) (5-up)201-006 $7.03 $6.52

Stack Up Banana Plug•Solderless banana plugs firmly holds wire withinternal set screw •Rated at 5000W VDC, 15A


Minigrabber TestClips to BNC Male•Red and black Minigrabber® test clips •Molded endmale BNC •50ohm, RG-58C/U cable

Order # Mfr. # Length (1-4) (5-up)201-101 5187-C-36 36" $17.64 $16.36201-102 5187-C-48 48" 18.86 17.49

Minigrabber® Test Clips to Dual Banana Plug•Red and black Minigrabber® test clips •Multi–stacking dual banana plug •50ohm, RG-58C/U cable

Order # Mfr. # Length (1-4) (5-up)201-103 3786-C-36 36" $15.80 $14.65201-104 3786-C-48 48" 18.04 16.74

Insulated Alligator Clip to Pin Jack•Alligator clip, nickel plated •Pin jack, gold plated •Accepts .080 diameter of pin •Fits on most standard DMM test probes •Package of ten

Price Per Pkg.Order # Mfr. # Color (1-4) (5-up)201-029 1437-0 Black $20.19 $18.72201-030 1437-2 Red 20.19 18.72

Male BNC to BNC cables•Non-molded strain reliefconnectors •50ohm, RG-58 cable •500V RMS rating

Order # Mfr. # Length (1-4) (5-up)201-097 5697-12 12" $7.74 $7.17201-098 5697-72 72" 11.17 10.36

Binding Posts•Accepts standard banana plug •Solder type terminal •Complete with insulators and hardware•2500VDC, 15A rating

Order # Mfr. # Color (1-4) (5-up)201-113 3760-2 Red $2.85 $2.64201-114 3760-0 Black 2.85 2.64201-115 3760-5 Green 2.85 2.64

Portable Banana Jacks•Closed entry receptaclesfor safety •Mounts in 3⁄4"centers on panels up to 3⁄8"thick •One black and onered receptacle •Rated at2500W VDC, 15A


Insulated Mini-Alligator Lead Set•Includes two of each:Black, red, yellow, greenand white •22AWG wire, 18" long •Multiple colors simplify identification •Jaw opens 1⁄4" max.•Mfr. #BU-00285


Insulated Alligator Lead Set•Includes two of each: Black, red, yellow, green andwhite •22AWG wire, 18" long •Tinned copper wire•Jaw opens 5⁄16" max. •Mfr. #BU-00287


Mini Alligator Clip•Number 20 wire or smaller can be gripped byfull-meshing teeth •Solder or crimp connection •5A rating •Steel (BU-30) or solid copper (BU-30C)

Order # Mfr. # (1-4) (5-up)69-018 BU-30 $0.29 $0.1969-166 BU-30C 0.39 0.29

Insulators for BU-30 and BU-70•Skin tight, flexible vinyl insulator

Order # Mfr. # Use for # Color (1-4) (5-up)69-138 BU-32-0 BU-30 Black $0.19 $0.1469-131 BU-32-2 BU-30 Red 0.19 0.1669-136 BU-72-0 BU-70 Black 0.29 0.2369-137 BU-72-2 BU-70 Red 0.29 0.23

General Purpose Clips•Used in automotive applications for electronic testers •Steel (BU-70) orsolid copper (BU-70C) •Crimp or screw connection

Order # Mfr. # (1-4) (5-up)69-061 BU-27 $0.69 $0.5669-165 BU-27C 0.99 0.87

Insulator for BU-27•Flexible, vinyl insulator has a textured finger grip •Double insulated

Order # Mfr. # Color (1-4) (5-up)69-032 BU-29-2 Red $0.49 $0.4669-031 BU-29-0 Black 0.49 0.47

Alligator Steel Clip with Barrel•Barrel construction for banana plug •Small lip for staking, soldering, or crimping the wire in barrel •10A rating •Solid stainless steel (BU-60X)•Solid copper (BU-60C)

Order # Mfr. # (1-4) (5-up)69-019 BU-60 $0.29 $0.2469-153 BU-60X 0.69 0.6469-170 BU-60C 0.59 0.52

Insulator for BU-60, 60S•Tough, flexible vinyl insulator that covers the entireclip except 1⁄16" of nose


Set Screw Banana Plug

•Set screw holds wire up to18AWG •Insulator will notseparate from banana plug


Unshrouded StackableBanana Plug

•Unshrouded 4mm nine-leafbanana plug •Accepts non-shrouded 4mm banana plugs•Wire up to 18AWG can be easily soldered to plug

Order # Mfr. # Color (1-4) (5-up)69-151 BU-16-0 Black $2.09 $1.9469-152 BU-16-2 Red 2.09 1.94

TaperedHandle Banana Plug•Through hole design locationfor wire •Insulator unscrews for access to wire connection •For standard wire up to 18AWG


Insulated Plug-On Test Prod with 8-32 Thread

•Mates with all shrouded,unshrouded and retractable4mm banana plugs •Positivecontact up to 1000V isprovided by 2mm stainless steel test point •Collar isflat on one side to prevent rolling •8-32 thread forscrew-on clips •IEC1010 compliant


21

C53_pg_438-439 8/14/08 1:23 PM Page 439

21

section

21

440Fax 1-800-765-6960

DCA55 SemiconductorComponent AnalyzerAn intelligent, slim, and invaluable componentanalyzer that presents the user with detailedcomponent information inconcise, easy to read, scrollable pages via itsLCD display. The unit negates the need for searchingthrough data books in many cases and is suitable for usewith bi-polar transistors, MOSFETS, low power thyristors,and triacs, diodes, and diode networks and LEDs including bi and tricolour ypes. Supplied with battery and universal test clips. Information measuredincludes: •Component type identification •Special feature identification •Pin outidentification •Measured parameters such as gain, gate threshold, voltages, voltdrop, etc. •Simple On/Off and scroll controls •Auto power off after 30 seconds•Dimensions: 4" (W) x 2.75" (H) x .78" (D)Order # (ea.)22-8242 $135.00

Penetrating Test Clip•Multi-purpose anglednose clip providesgreater separationwhen used side-by-side

•Opposed “U” jaws grip a variety of cross sections •Stripping of insulation unnecessary •Cluster of hardened needles insurepenetration of wire insulation •Two or more wires may bepenetrated at once for a temporary splice •Insulation “heals” as needles are withdrawn •Single penetrator pin is alsoprovided for heavier wire insulation •Mfr. #JP-8783

Order # (ea.)72-6520 $4.49

Insulating Boot for JP-8783•Integral thumb grip •Toughvinyl insulator •Barrel supportscord, acts as strain relief

Order # Mfr. # Color (ea.)72-6521 JP-8681-BLK Black $0.5972-6522 JP-8681-RED Red 0.59

Pen-Style Digital Infrared Thermometer

Is it hot or cold and how hot/how cold? Be safe and rely on this IR thermometer for quick and easy surface

temperature measurements. Thousands of uses. Ideal for HVAC and plantmaintenance technicians, electricians, mechanics, health care workers,homemakers, veterinarians, professional chefs and many others. Features:•Temperature range: -27°~428°F/-33°~220°C •Accuracy: ±2% of reading or ±2°C•1:1 optics, distance-to-spot size ratio •Does not use laser beam •Non-contact•Includes two LR44 lithium batteries, provides 180 hours of continuous operation•For complete specifications and a usage guide visit www.mcmelectronics.com .

Order # (ea.)DIT-205 $43.95

Real WorldCertifier™Can’t afford a$5000 certifier butneed more thanyour $200 testeroffers? The RealWorld Certifier(RWC) performs sophisticated timing, crosstalkand cable construction teststo display cable category (Cat 5e,

Cat 6, etc.), propagation delay, skew, plus all of thenormal length, opens, shorts, distance to fault, wiremap and other tests that you expect from a tester ofthis caliber. Installations improve because the RWCspots slightly undercrimped connections, cable coiledin the wall and other maladies that affect cable performance. And for hubs, switches and NIC cards,the RWC displays the device’s signal level(s) anddevice type (10, 100, 1000Mb/s, half and full duplex).This is useful in determining signal strength at theend of a long cable run. Up to 250 tests can be storedin flash memory and then transferred to your PC’sexcel for emailing or printing. Includes the main unit, a toner probe, carrying case and one hour instructional DVD. Compatible with all network devices.Order # Mfr. # (ea.)72-7920 RWC1000K $613.00

Lan TesterInstant answers to a LAN device’s most critical questions:Is it ON? What are itscapabilities (10Mb,100Mb, 1000Mb, half or full duplex)?Perfect for a quick check of your equipmentconfigurations includingthe negotiated speedbetween two devices. Orput one in each of yourremote offices as a quick

troubleshooting tool whenthe remote cannot connect to the central office.Includes a tone probe for tracing cable and cabletesting capability. Compatible with all networkdevices. A must for every toolbox!

Order # Mfr. # (ea.)72-8050 TVR/10/100/1000 $209.00

440 Scope Plus Combo KitSave money by purchasing the 440 hand held oscilloscope/DMM combo kit.Includes: •440 scope plus •AC adaptor

•Test leads •A403 Boot •Software and cable •Soft zipper carrying case.

Order # (kit)72-7875 $315.00

Pocket Size CombustibleGas Leak Detector

Detects combustible gases: Methane,butane, propane, gasoline, diesel andkerosene. Four peak levels: 1000, 2000,4000 and 5000ppm. Features: •Autozeros •Visible and audible alarm•Instant response •One-hand operation •Pocket clip included

Order (ea.)72-8075 $59.95

1-800-543-4330

Combustible Gas Leak Detector

Simple to operate with one hand whiledetecting the presence of combustible

gases. Pinpoint leak sources with itsaudible and visual indicators. Adjustable“tic” rate helps eliminate background gas concentration in contaminatedenvironments. Features: •Instant response•10ppm sensitivity •16" gooseneck •Softcarrying pouch included •Dimensions: 3" x9.5" x 1.75"

Order (ea.)72-8080 $149.95

Switchable Oscilloscope ProbesFeatures: •X1, X10 switchable attenuation•1Mohm and 47pF input impedance (X1) •1.2m cable length •600V maximum input voltage•Compensation range 10~35pF •Meets IEC-1010safety standards for 600V CAT I applications

Order # Mfr. # Bandwidth Risetime (ea.)72-6586 SP60B 60MHz 5.8ns $34.9572-6587 SP100B 100MHz 3.5ns 42.9572-8060 SP150B 150MHz 2.3ns 44.9572-6588 SP200B 200MHz 1.8ns 49.9572-8065 SP250B 250MHz 1.4ns 54.9572-8070 SP300B 300MHz 1.1ns 59.95

Test Equipment

C53_pg_440-441 8/14/08 1:24 PM Page 440

21

NET 30Terms

section

21


USB Spectrum AnalyzerTroubleshoot, analyze, optimize,perfect for troubleshooting interference from thefollowing devices: Wi-fi, microwave ovens, cordlessphones, Zigbee and Bluetooth. Wi-Spy™ is the world's smallest 2.4GHz spectrum analyzer, and has been designed specifically for troubleshooting and analyzing wi-fi networks using patent pendingtechnology. Wi-Spy™ shows the signal strength for allwi-fi networks as well as bluetooth, 2.4GHz cordlessphones, microwaves, zigbee, and all other 2.4GHztransmitters. Perfect solution for those people whodeploy and maintain wi-fi networks, have intermittentbandwidth problems with wi-fi or have troubleidentifying interference from microwave ovens orcordless phones Includes: •Wi-Spy™ USB adaptorand software package System requirements:PC/Mac with available USB port, CD-ROM forinstalling or running software Software compatiblewith: Windows PC running IE 5.01 or higher and Net framework 1.1 or higher or MAC OSX (softwaremust be downloaded from manufacturer) •Seewww.mcmelectronics.com for full datasheet

Order # (1-9) (10-up)72-8185 $177.00 $167.00

Lil Bitty Tester™Go/no go tester that fits in a shirt pocket. Testcapabilities: •Continuity•Detect transistor leakage•Detect DC voltage •Detectpolarity of DC voltage•Discrete components Test In or Out of Circuit:•Transistors •FET •SCR•Bipolar light emittingdiodes •Incandescent lamps •Triacs •Diodes •Bridge rectifiers •LED •90 day warranty

Order # (ea.)72-6120 $36.31

Compact PocketMultimeterGeneral purpose multimeter is perfect for the toolbox, the worktruck or the classroom.It includes all of themost commonly usedDMM functions, for agreat price. This 1999count meter measuresAC/DC voltage, DC current and resistance.It also test 1.5V and 9Vbatteries under load andhas a 50Hz reference square wave output. With permanently attached test leads, this unit is CATII rated to 300V. Uses one Type A23 12V battery (#291-615), included.

Specifications Range AccuracyDC voltage 200mV, 2000mV, ±(1.5%+2)

20V, 200V, 300VAC voltage 200V, 300V ±(2.5% +15)DC current 2000µA, ±(2.5% +10)

20mA, 200mAResistance 200Ω, 2000Ω, ±(2.5%+5)

20KΩ, 200KΩ, 2000KΩSquare wave output 2.7V p-pBattery load 9V @ 5mA, 1.5V @ 50mAInput impedance 1MΩDimensions 35⁄8" (H) x 2" (W) x 1" (D)

Order# (ea.)72-7940 $10.49

Full Range DMMFeatures: •Transistorcheck •Diode check•Resistance •DC current•AC/DC voltage •31⁄2 digitdisplay Specifications: DCvoltage: •200mV, 2V, 20V,200V, 1000V AC voltage: •200V, 750V DCcurrent: •200µA, 2000µA,20mA, 200mA, 10AResistance: •200ohm,2Kohm, 20Kohm, 200Kohm,2MKohm General: •Power requirements: One 9Vbattery •Dimensions: 3" (W) x 5" (L) x 3⁄4" (H) •Weight:.5 lbs. •Comes complete with test leads and owner’smanual •90 day warranty

Order # (ea.)72-6343 $15.79

DAY LIMITED90 WARRANTY

High Impact Case MultimeterThe #260-8XI has the same features as the #260-8 plus a drop-resistant ABS casewith high-visibility yellowfinish and an audible continuity check •The #260-8XPI also has a relayoverload protection circuit

Order # Mfr. # Overload Protection (ea.)72-6213 260-8XI No $211.0072-6214 260-8XPI Yes 254.00

General PurposeMultimeterFeatures: •Nine DC andseven AC voltage ranges•Six DC current ranges•Three resistance ranges•Five decibel rangesSpecifications: DC voltage: •Ranges: 250mV, 1V, 2.5V, 10V, 25V, 50V, 250V, 500V,1000V (20Kohm per volt)•Accuracy: ±2% of fullscale AC voltage: •Ranges: 2.5V, 10V, 25V, 50V, 250V,500V, 1000V (5Kohm per volt) •Accuracy: 3% of fullscale Resistance: •Ranges: 0~2Kohm, 200Kohm,20Mohm •Accuracy: 2.5° of arc on 2Kohm and 2° ofarc on greater than 2Kohm DC current: •Ranges:50µA, 1mA, 10mA, 100mA, 500mA, 10A Accuracy:•+1.5% of full scale on 50µA and 2% on greater than50µA Decibels: •Ranges: -20~+10, -8~+ 22, 0~30,6~36, 20~50dB General: •Power requirements: One“AA” (#292-015) and one 9V (#292-035) •Dimensions:5.5" (W) x 7" (H) x 363⁄64" (D) •Weight: 3 lbs. •Comescomplete with test leads, alligator clips, batteries andinstruction manual •One year manufacturer warranty•Model 260-8P includes relay overload protection•Model 00043–test leads for model 260-8

Order # Mfr. # (ea.)72-6212 260-8 $188.0072-6532 260-8P 278.00

Test Leads for #72-6212 and 72-6532Order # Mfr. # (ea.)72-6211 00043 $18.95

UV EPROM Eraser with Timer Four Device•Molded plastic case •Shirt pocket

size •Auto start •Erases most EPROMs and EPLDsin three minutes •Handles all sizes up to four at atime •Regulated lamp output for uniform erase time•Internal 2~8 minute timer and time out beeper •Mfr. #DATAII-ACT

Order # (ea.)72-6556 $55.00

Noise Plug Pink Noise GeneratorThe Noise Plug is a complete, precision pink noisegenerator built into a XLR microphoneconnector. Simply plug it into aphantom powered microphone input on yourmixer and turn up the volume. Features:•20Hz~20KHz precision reference •Accurate 3db per octave rolloff •Balancedmicrophone level output •Built-in phantom powerindicator •Compact design •No batteries required

Order # (ea.)72-6565 $50.45


Weschler VariableTransformersPanel mounted or portable unitsprovide output voltage that can be adjusted from 0~117% of the input. Rugged and reliable auto-transformers are high efficientcy and capable of short term overloads.Output is free of distortion, making them ideal for testing, meter calibration or control of electro-mechanical forces. Portable units includecase, power cord, on/off switch, fuse and outlet receptacle. One year manufacturer warranty. UL listed

Order # Fig. Description (ea.)72-6421 A 0~132VAC, 2.5A $109.0072-6423 B 0~140VAC, 10A 245.00

AB


Microwave Leak Detector

•Highly accurate leak detector used to check doorgaskets and latches on all brands of microwaveovens •An absolute must for accurate leak detection•FDA approved Features: •Power range:0~10mW/cm •Accuracy: ±1dB •Response time: 2~3 seconds •Calibrated at 2450MHz •Check feature •Low battery indicator •Overload capacity:Continuous 2000mW/cm •Holaday #HI-1801

Order # (ea.)72-995 $617.00

441

Digital Pocket ThermometerFeatures: •Measurement range: -58°F~ +302°F and -50°C~+150°C •Protective probe cover •°C or °F selectable•Temperature hold function •Automatic power off after ten minutes Specifications: •Display resolution: 0.1°between -19.9°~+199.9°, otherwise 1° •Sampling time, 1sec •Battery life, 5,000 hours General: •Powerrequirements: One LR43 battery included •90 day warranty

Order # (ea.)72-6541 $19.95

Test Equipment

C53_pg_440-441 8/14/08 1:25 PM Page 441

certificate of calibration traceable to nist

Documents