Certificate of Compliance• ALP LIFTING PIN ANCHORS AND LIFT EYES• ALP QUIKLIFT@ ANCHORS AND RING CLUTCHES• ALP UTILITY LIFT ANCHORS

• ALP LIFT LOOPS• ALP R-ANCHORS™

• ALP COIL INSERTS

This is to certify that the above lifting and handling product has been manufactured and tested in accordance with the quality control plan established by ALP Supply and meets or exceeds OSHA 29 CFR 1926.704 when compared to the listed catalog rating for the lifting device.

This document certifies each manufactured product can be related to a quality control plan. The manufacturing quality control tests can be made available upon written request and when appropriate.

The rated capacities are for mechanical capacity of the listed anchor or insert only. Placement, edge distances, embedment depth, concrete strength, attachment device, sling angles, and rigging consideration are not part of this certificate of compliance.

David Jablonsky, P.E., FPCI - Executive Vice President 1/1/20