certification of pv modules and electronicspvopmaat.nl/u/files/vde-renewables-norbert-lenck.pdf ·...
TRANSCRIPT
-
PV OpMaat workshop
BIPV Power Electronics
Norbert Lenck
11.09.2018
Certification of PV Modules and Electronics
-
9/14/2018 © VDE Renewables GmbH 2
-
Contents
14.09.2018 © VDE Renewables GmbH 3
� Introduction
� Photovoltaic certification standards
� BIPV
� Power Electronics / CE declaration
-
Introduction
14.09.2018 © VDE Renewables GmbH 4
� VDE Reneables is a 100 % subsidery of VDE (Verband der Elektrotechnik Elektronik Informationstechnik)
� Our Portfolio; tests and certifications for:
− PV Modules
− PV systems and power plants
− Wind power plants
− Batteries
− Inverters, electronics, components
� My backround: I have been working since more than 35 years in PV business (module development, consultant as well PV module testing and certification)
-
14.09.2018 © 2017 VDE Renewables GmbH 5
61215 Design qualification and type approval 61215 - 1 Test requirements
61215 - 1 - 1 Special requirements for testing of crystalline silicon PV modules
61215 - 1 - 2 Special requirements for testing of thin-film Cadmium Telluride (CdTe) PV modules
61215 - 1 - 3 Special requirements for testing of thin-film amorphous silicon PV modules
61215 - 1 - 4 Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 PV modules
61215 – 2 Test procedures
Photovoltaic certification standards
-
14.09.2018 © 2017 VDE Renewables GmbH 6
61730 PV module safety qualification 61730 – 1 Requirements for construction
61730 – 2 Requirements for testing
61701 Salt mist corrosion testing
62804 Test methods for the detection of potential-induced degradation
62716 Ammonia corrosion testing
Normative references to e. g. insulation materials (TI, RTE), Current / Voltage measurement, Solar radiation …..
Photovoltaic certification standards
-
14.09.2018 © 2017 VDE Renewables GmbH 7
61215
-
14.09.2018 © 2017 VDE Renewables GmbH 8
61730
-
BIPV
14.09.2018 © VDE Renewables GmbH 9
A photovoltaic module or installation in the context of BIPV has one ore more of the following functions:
� Mechanical rigidity or structural integrity
� Primary weather impact protection: rain, snow, wind, hail
� Energy economy, such as shading, daylighting, thermal insulation
� Fire protection
� Noise protection
� Separation between indoor and outdoor environments
� Security, shelter or safety
-
BIPV
14.09.2018 © VDE Renewables GmbH 10
• A “specifikation” of BIPV and a list of the different kinds and installation options are listed in EN 50583 (1 and 2)
• In any case all BIPV modules should fulfill the reqirements of the PV standards IEC / EN 61215 and 61730
• Further reqirements, depending of the kind of BIPV are listed in EN 50583
• In additon different building regulation for each country must be considered
-
BIPV
14.09.2018 © VDE Renewables GmbH 11
• A “specifikation” of BIPV and a list of the different kinds and installation options are listed in EN 50583 (1 and 2)
• In any case all BIPV modules should fulfill the reqirements of the PV standards IEC / EN 61215 and 61730
• Further reqirements, depending of the kind of BIPV are listed in EN 50583
• In additon different building regulation for each country must be considered
-
Power Electronics / CE declaration
14.09.2018 © VDE Renewables GmbH 12
� The manufacturer is responsible that all products which are marked fullfil all EU rules.
� This has to be confirmed with the CE declaration
� That means for standard PV modules: The “Low Voltage Directive 2014/35/EU” with the harmonized standard EN 61730
� For additional elektical or electronic parts further regulation and standards may come into consideration
� The Electromagnetic Compatibility (EMC Directive 2014/30/EU)
− In case of a “system” (fixed mounting of different parts) it is not enough to qualify each electronic part, the whole system has to be tested.
� The Radio Equipment Directive 2014/53/EU (RED) may also be considered.
� Live time of the electronic ?
-
14.09.2018 © 2017 VDE Renewables GmbH 13
Thank you for your attention
Questions?