www.cgis.ca

CGISCorporate Product List

www.cgis.ca

The World’s Best Valves®

Our expertise also allows us to offer customized consulting services in the following areas:

There is no perfect valve but there is the right valve for the application and therefore selection is key. The real challenge is finding valve experts who can analyze the process and recommend the appropriate valve for the presented conditions.

CGIS is the global supplier of the highest performance valves, controls, and automation. Since 1980 we’ve been committed to understanding the application and ensuring our customers always get the right valve, well before a dollar is spent. With offices throughout Canada and Australia, we serve customers worldwide—on six continents.

CGIS offers a unique ability to deliver superior technical expertise in the world of Severe Service Valve (SSV) applications, which improve our customers’ reliability, safety, and bottom line in a dynamic and competitive marketplace.

• Valve specifications and review

• Valve failure analysis

• Valve inventory rationalization

• Valve cost comparisons

• Expert witness testimony

• Control valve sizing and selection

www.cgis.ca

ADAMS• Severe Service Zero Leakage triple offset metal seated butterfly valves• Combined function check, isolation and control valves• Compressor and steam turbine extraction check valves

Ceresist, Inc.• Ceramic lined piping, fittings, valves, orifice plates and ancillary products• Erosion and corrosion resistant materials

Chaoda USA• Metal and soft seated floating, trunnion and top entry ball valves• Gate, globe and check valves available• Fully integrated manufacturing and quality systems• High alloys, Stainless Steel and Carbon Steel offerings• Cast 2”–56” up to class 2500, forged steel ¼”–2” up to class 1500• Meet API 6A/D and CSA Z245.15 standards

Chemline Plastics Limited• Thermoplastic (PVC, CPVC, PP, PVDF) ball, butterfly, gate, diaphragm, needle,

globe and check valves• Corrosion resistant pneumatic and electric actuators• Corrosion resistant plastic piping

Custom Gaskets• Durlon compressed fibre, modified Teflon, metallic and resilient gasket materials• Garlock compressed fibre, modified Teflon, metallic and resilient gasket materials• Klinger gasket materials• Inertex expanded PTFE gasket products, joint sealant, gasket tape and valve stem packing• RobChem modified Teflon

DSS Valves• CL150, CL300, CL600 and CL900 Zero Leakage bi-directional fully rated Severe Service

knife gate valves• Double block and bleed options• Carbon Steel, Ni-Resist, Stainless, Duplex, Hastelloy C, Titanium and other high alloys

EBRO Armaturen• Resilient seated, Teflon lined and high performance butterfly valves• Check valves• Electric and pneumatic actuators

Elasto-Valve Rubber Products• Pinch valves• Elastomer check valves• Expansion joints• High temperature duct connections

Flowserve• Argus ball valves• Automax pneumatic and electric actuators, limit switches and positioners• Atomac Teflon lined ball valves, ball check valves and sight glasses• Durco metal and Teflon lined plug, butterfly and steam jacketed valves• Edward steam service gate, globe and check valves• McCanna-MARPAC ball valves• Serck Audco lubricated plug valves• Valbart trunnion, rising stem and top entry ball valves• Worcester ball valves

www.cgis.ca

Flowserve-Control Valve Division• Kammer cryogenic, low flow (Cv ≥ 0.0000012), sanitary, lined globe and

Severe Service control valves

• Logix digital smart HART/Foundation-Fieldbus self-tuning, quick calibration, industry

leading health diagnostics positioners (SIS, SIL, PST, ExProof)

• NAF segmented ball (Setball), butterfly (Torex), full port ball (Duball) control valves

• Valtek general service and Severe Service control valves for cryogenic, high noise,

cavitation, two phase flow, flashing, erosive and corrosive applications

• Valbart large diameter (up to 56”) high pressure (up to CL2500) trunnion mounted ball

control valves with noise, cavitation & noise-cavitation Severe Service trim

Gemu Valves• Metal, plastic, Teflon and rubber lined diaphragm valves

• Sanitary diaphragm valves and sampling equipment

• Pneumatically and electrically actuated diaphragm and globe valves

• Variable area flow meters and plastic solenoid valves

• Angle globes

HY-GRADE Valve, Inc.• Severe Service single flapper and dual flapper wafer check valves

• Wrought and forged Carbon Steel, Stainless Steel, Monel, Hastelloy C, Titanium,

Zirconium and other alloys

• Retainerless design eliminates leakage to atmosphere

• Fire safe to API 6FA and 6FD

• Pressure ratings from ASME Class 150 to 2500, API to 10,000

Hydro Thermal• Hydroheater®, Solaris®, Infuze Heater™, EZ Heater® direct steam injection

process heaters

• ATTEC® heating systems

• Energy efficient, low maintenance, quiet operation

• Precise temperature control, immediate heat-up

• Self-cleaning non fouling design suitable for slurries

• Customized products for process applications

KPC Corporation• Floating, trunnion and top entry ball valves in all sizes and pressure classes

for the hydrometallurgy, oil & gas and process industries

• High alloy forgings, wrought bars and centrifugal castings

• Specializing in Titanium, Inconel, Hastelloy and Duplex steels

• Meet API 6A/D standards

Limitorque Fluid Power Systems• Multi-turn and quarter-turn electric actuators

• Quarter-turn gas, hydraulic and pneumatic Scotch yoke actuators

• Flexibility through modular design

• Ideally suited to the harsh Canadian and Arctic winters

Midland-ACS• IMPACT 2000™ control valve in 316 Stainless Steel or brass body

• ATEX, NEMA, UL and CSA approved

• Stainless Steel pneumatic and hydraulic solenoids in sizes up to 3” and Cv of 80

www.cgis.ca

N-Line Valves• Severe Service control choke valves

• Axial flow control valves

• Pressure rating to API 10,000 and ASME 2500

• API Q-1 quality management program

Numatics• Lapped spool and sleeve directional control valves

• Directional valve manifolds with optional Bus communications

• Modular automation products including grippers, rotary actuators and slides

• Air preparation products including filters, regulators, lubricators and air dryers

• Non-repairable and NFPA compliant Stainless Steel air cylinders

RDC Control• Hydraulic and pneumatic linear cylinder actuators

• Designers of the Intelligent Pneumatic Cylinder (IPC) system

• Thermocouple

Sofis Valve Operation• Mechanical valve interlocks and Activity Management Systems

• EasiDrive portable valve actuators

• FlexiDrive mechanical valve linkage systems for remote and/or simultaneous operations

• Partial stroke actuator systems

StoneL Valve Communication Solutions• ValvePoint valve position monitors and position transmitters

• FieldLink process networking solutions—AS-i, DeviceNet, Foundation Fieldbus, ProfiBus

and other Bus protocols supported

• Mechanical, reed type proximity and inductive type proximity switches

• Mounting kits available to almost any rotary or linear actuators

ValvTechnologies• V-Series Zero Leakage Severe Service metal seated ball valves

• ASME Section I electronic relief valves

• Carbon Steel, Stainless Steel, Chrome-Moly and other alloys

• Pressure ratings from ASME Class 150 to 4500, API 5000 to 20,000

• IsoTech® Zero Leakage parallel slide gate valves

• NexTech® trunnion metal seated ball valves

• Rhinoite® hardfacing MIG weld overlay

• TrunTech® API 6A/D ball valves

• Xactrol® control valves

®

www.cgis.ca

AUTOMATIONActuation• Automax pneumatic rack & pinion & Scotch yoke to 2,000,000 inch pounds• Chemline Plastics pneumatic and single phase electric plastic housing• EBRO Scotch yoke actuator• Limitorque electric, pneumatic, hydraulic and electro-hydraulic actuators• Worcester pneumatic rack and pinion pneumatic actuator

Accessories• Automax lock-out modules• EBRO limit switches• Logix positioners• Midland Stainless Steel pneumatic and hydraulic solenoids• Numatics pilot solenoid and air preparation• Sofis Valve Operation mechanical valve interlocks and activity management

systems• StoneL proximity switches and FieldLink network hardware

SERVICE CENTREIn-House Services• Authorized service centre for valves and actuation• Two 15,000 square foot facilities with in-house training centre• Valve test stand up to 36” and pressure test to ASME Class 4500• Disassembly, reassembly and testing• Range of NDE capabilities• OEM parts inventory and quick ship programs

Field Services• Evaluation and inspection• Preventative maintenance programs• Start-up / commissioning• Spare parts inventory program

Control & Isolation Demonstrator (CID)• Demonstration loop designed to show the objective results of valve performance• Enables direct visual inspection of fluid dynamics• Parallel piping allows comparison in real time of up to three valves at a time• Loop demonstrates actual valve performance of isolation and control valves as well

as control systems such as Foundation Fieldbus, ASi, DeviceNet and more

SEVERE SERVICE VALVESevere Service Isolation Valves (SSIVs)• ADAMS triple offset metal seated rotary valves• DSS Valves Severe Service knife gate valves and double block and bleed valves• ValvTechnologies metal seated ball valves and parallel slide pressure seal gate valve

Severe Service Control Valves (SSCVs)• Kammer cryogenic, low flow, sanitary, lined globe and Severe Service control valves• NAF and Valbart noise attenuation and cavitation elimination ball control valves• N-Line angle, axial flow and control choke valves• Valtek general service and Severe Service control valves for cryogenic, high noise,

cavitation, two phase flow, flashing, erosion and corrosion applications• ValvTechnologies Mark I, II and III ball control and ERV’s

Severe Service Check Valves (SSCKVs)• HY-GRADE check valves with integral flapper and shaft and a retainerless design

www.cgis.ca

PRODUCT LIST

Ball Valves• Atomac Teflon lined ball valves• Chaoda trunnion, floating and top entry ball valves• Chemline Plastics PVC, CPVC, PP and PVDF ball valves• KPC trunnion and floating ball valves• Valbart trunnion, rising stem and top entry ball valves• ValvTechnologies carbide coated integral and trunnion metal seated ball valves

Butterfly Valve• ADAMS triple offset metal seated butterfly valves• Chemline Plastics PVC, PP and PVDF butterfly valves• Durco Teflon lined and high performance butterfly valves• EBRO resilient, Teflon lined and high performance butterfly valves• Flowserve RX butterfly valves• NAF Teflon and metal seated butterfly valves

Control Valves• Kammer globe control valves• NAF segmented ball, butterfly and full port ball control valves• N-Line angle, axial flow and control choke valves• Valtek segmented ball, eccentric plug, butterfly and globe control valves• Worcester V-notch ball control valve

Check Valves• ADAMS combined function check valves• Chaoda check valves• Edward stop-check valves• HY-GRADE high performance wafer swing check valves• Valtek Tek-Check piston check valves

Diaphragm Valve• Chemline Plastics diaphragm valves• Gemu weir and straightway diaphragm valves

Gate and Globe Valves• Anchor Darling gate and globe valves• Chaoda gate and globe valves• Chemline Plastics gate and globe valves• Edward gate and globe valves• ValvTechnologies parallel slide pressure seal gate valves

Knife Gate Valves• DSS Valves Severe Service knife gate valves and double block and bleed valves

Pinch Valves• Elasto-Valve Rubber Products manual and actuated pinch valves

Plug Valves• Durco sleeve lined, teflon lined and jacketed plug valves• Serck Audco plug valve

Relief and Regulator Valves• Cashco pressure reducing, relief and back-pressure regulator valves• Cash-Acme pressure reducing, relief and back-pressure regulator valves• Chemline Plastics pressure reducing, relief and back-pressure regulator valves• ValvTechnologies electronic relief valves

Product ListSPECIALTY PRODUCTS• Ceresist custom engineered ceramic products

• ChemFlare PFA tubing and fittings

• Eaton pipeline strainers

• Elasto-Valve Rubber Products expansion joints

• ONIS quick-action line blinds

• Rhinoite® hardfacing MIG weld overlay

Email sales@cgis.ca for online enquiries.We look forward to working with you.

CGIS OfficesCANADAVancouver, BC 604.263.1671Prince George, BC 250.562.8261Calgary, AB 403.271.6695Edmonton, AB 780.462.1014Fort McMurray, AB 587.458.2068Saskatoon, SK 306.570.2003Montreal, QC 514.600.2220St. John’s, NL 709.770.9898

AUSTRALIAAdelaide, SA 61.428.355.583Perth, WA 61.427.031.173

www.cgis.ca