ch_10

10 Descriptive Geometry

Chapter ObjectivesLocate points in three-dimensional (3D) space.Identify and describe the three basic types of lines.Identify and describe the three basic types of planes.Solve descriptive geometry problems using board-drafting techniques.Create points, lines, planes, and solids in 3D space using CAD.Solve descriptive geometry problems using CAD.

Section 10.1 Basic Descriptive Geometry and Board Drafting

Section 10.2 Solving Descriptive Geometry Problems with CAD

Plane Spoken Rutans unconventional 202 Boomerang aircraft has an asymmetrical design, with one engine on the fuselage and another mounted on a pod. What special allowances would need to be made for such a design?

328

Drafting Career

Ef cient travel through space has become an ambi-tion of aeronautical engineer, Burt Rutan. I want to go high, he says, because thats where the view is. His unconventional designs have included every-thing from crafts that can enter space twice within a two week period, to planes than can circle the Earth without stopping to refuel.

Designed by Rutan and built at his company,

Scaled Composites LLC, the 202 Boomerang aircraft is named for its forward-swept asymmetrical wing. The design allows the Boomerang to y faster and farther than conventional twin-engine aircraft, hav-ing corrected aerodynamic mistakes made previously in twin-engine design. It is hailed as one of the most beautiful aircraft ever built.

Academic Skills and AbilitiesAlgebra, geometry, calculusBiology, chemistry, physicsEnglishSocial studiesHumanitiesComputer use

Career PathwaysEngineers should be creative, inquisitive, ana-

lytical, detail oriented, and able to work as part of a team and to communicate well. They must have a bachelors degree in engineering and be licensed in the state in which they work.

Go to glencoe.com for this books OLC to learn more about Burt Rutan.

Burt Rutan, Aeronautical Engineer

329Jim Sugar/Corbis

10.1

Connect Understanding basic geometric constructions prepares you to use geometry in solving design problems. You have already learned how to solve design problems using auxiliary views. How do you think geometric constructions will help you?

Content Vocabulary descriptive geometry slope

bearing azimuth

grade point projection

Academic VocabularyLearning these words while you read this section will also help you in your other subjects and tests. structure identify

Graphic OrganizerUse a chart like the one below to organize notes about points, lines, and planes.

Go to glencoe.com for this books OLC for a downloadable version of this graphic organizer.

NCTE National Council of Teachers of English

NCTM National Council of Teachers of Mathematics

Academic Standards

English Language Arts

Read texts to acquire new information (NCTE)

Mathematics

Geometry Apply appropriate techniques, tools, and formulas to determine measurements (NCTM) Geometry Analyze characteristics and properties of two- and three-dimensional geometric shapes and develop mathematical arguments about geometric relationships (NCTM)

Basic Descriptive Geometry and Board Drafting

Drawing 3D Forms

Points PlanesLines

330 Chapter 10 Descriptive Geometry

Elements of Descriptive GeometryWhat are the basic elements of descriptive geometry?

The designer who works with an engi-neering team can help solve problems by producing drawings made of geometric ele-ments. Geometric elements are points, lines, and planes de ned according to the rules of geometry. Every structure has a three-dimensional (3D) form made of geometric elements (see Figure 10-1). To draw three-dimensional forms, you must understand how points, lines, and planes relate to each other in space to form a certain shape. Prob-lems that you might think need mathemati-cal solutions can often be solved instead by drawings that make manufacturing and con-struction possible.

Descriptive geometry is one method a designer uses to solve problems. It is a graphic process for solving three-dimensional prob-lems in engineering and engineering design. In the eighteenth century, a French Math-ematician, Gaspard Monge, developed a system of descriptive geometry called the Mongean method. Its purpose was to solve spa-tial problems related to military structures. The Mongean method has changed over the

years, but engineering schools throughout the world still teach its basic principles. By study-ing descriptive geometry, you develop a rea-soning ability that helps you solve problems through drawing.

Most structures that people design are shaped like a rectangle. This happens because it is easy to plan and build a structure with this shape. But this chapter presents a way to draw that lets you analyze all geometric elements in 3D space. Learning to see geometric elements this way makes it possible for you to describe a structure of any shape. See Figure 10-2 for examples of the basic geometric elements and some of the geometric features commonly found in engineering designs.

Identify In what basic shape do most people design structures?

PointsHow do points help solve problems regarding drawing lines?

A point is used to identify the inter-section of two lines or the corners on an object. A point can be thought of as having an actual physical existence. On a drawing, you can indicate a point with a small dot or a small cross. Normally, a point is iden-ti ed using two or more projections. In Figure 10-3 on page 334, the normal ref-erence planes are shown in a pictorial view with point 1 projected to all three planes. The reference planes are shown again in Figure 10-4 on page 334. When the three planes are unfolded, a at two-dimensional (2D) surface is formed. V stands for the ver-tical (front) view; H stands for the horizon-tal (top) view; and P stands for the pro le (right-side) view.

Points are related to each other by distance and direction as measured on the reference planes. In Figure 10-5, you can see the height dimensions in the front and side views,

Figure 10-1This bridge shows the result of combining geometric elements.

Section 10.1 Basic Descriptive Geometry and Board Drafting 331

Rob

ert

Har

din

g/C

orb

is

POINTS

LINESSTRAIGHT CURVED

TRIANGLE SQUARE PENTAGON HEXAGONPLANES

CIRCLE ELLIPSE

SOLIDS

FIVE BASIC SOLIDS

SQUAREPYRAMID

TRIANGULARPRISM

CYLINDER CONE

TETRAHEDRON HEXAHEDRON OCTAHEDRON DODECAHEDRON ICASAHEDRON

HV

IV

IH

P

I P

A

SUPERSCRIPT H USED TO DENOTE HORIZONTAL PLANE

V

HORIZONTALPLANE (H)

PROFILEPLANE (P)

FRONT VERTICALPLANE (V)

IV

TOP

SIDE

B

HV

IV

IH

P

I P

HORIZONTAL PLANE

VERTICALPLANE

PROFILEPLANE

FOLDINGLINES

Figure 10-2Basic geometric elements and shapes

Figure 10-3Locating and identifying a point in space

Figure 10-4The point from Figure 10-3 identifi ed on the unfolded reference planes


HV P

W

D

H

WIDTH DEPTH

HE

IGH

TD

EP

TH

HV P

LEN

GT

H

DISTANCE BEHIND V. REF.

DISTANCE BEHINDP. REF.

DISTANCEBELOWH. REF. A

HV P

B

HV P

C

HV P

A

HV P

B

HV P

C

TL

TL

TL

TL

TL

TL

location only, a line has location, direction, and length. You can determine a straight line by specifying two points or by specifying one point and a xed direction. However, plotting irregular curves is somewhat more dif cult and must be done very carefully.

The Basic LinesLines are classi ed according to how they

relate to the three normal reference planes. The three basic types of lines are normal, inclined, and oblique.

Normal LinesA normal line is one that is perpendicular to

one of the three reference planes. It projects onto that plane as a point (see Figure 10-6). If a normal line is parallel to the other two ref-erence planes (see Figure 10-7), it is shown at its true length (TL).

Inclined LinesAn inclined line, like a normal line, is per-

pendicular to one of the three reference planes. However, it does not appear as a point in that plane but at its true length (see Figure 10-8). In all other planes, it appears foreshortened.

Figure 10-5The relationship of points on the three reference planes

Figure 10-6Normal lines are perpendicular to one of the three reference planes.

the width dimensions in the front and top views, and the depth dimensions in the top and side views.

Explain How are points related to each other?

LinesHow is a point different from a line?

If a point moves away from a xed place, its path forms a line. Whereas a point has

Figure 10-7Lines that are perpendicular to one reference plane and parallel to the other two reference planes appear at their true length.


INCLIN

ED

INCLINED

INCL

INED

TRUE

LENG

TH

INCLINED

FOR

ES

HO

RT

EN

ED

P P P

A

V VH H

V

CB

H

HV P

AV

AH

AP

BV

BH

BPANGLESCANNOT BEMEASURED

A

REFERENCE PLANEPLACED PARALLEL TOVERTICAL PROJECTION

HV P

VI

TL

HV P

REFERENCE PLANEPLACED PARALLEL TOPROFILE PROJECTION

TL

PI

B

HV P

TL

HI

REFERENCE PLANEPLACED PARALLEL TOHORIZONTAL PROJECTION

C

Figure 10-8Inclined lines are parallel to one reference plane and show their true length in that plane only.

Oblique LinesAn oblique line appears inclined in all three

reference planes as in Figure 10-9. It forms an angle other than a right angle with all three planes. In other words, it is not perpen-dicular or parallel to any of the three planes. The true length of an oblique line is not shown in any of these views. Also, the angles of direction cannot be measured on the nor-mal reference planes.

True Length of Oblique LinesNormal lines and inclined lines project par-

allel to at least one of the normal reference planes. A line parallel to a reference plane shows true length in that plane. Because an oblique line is not parallel to any of the three normal reference planes, you must use an auxiliary reference plane that is parallel to the oblique line to show its true length (see Figure 10-10). The auxiliary reference plane must be perpendicular to its normal reference plane, as shown in Figure 10-11.

Figure 10-9Oblique lines appear inclined in all projections, so their true length cannot be determined from the normal reference planes.

Figure 10-10The true length of an oblique line can be found by auxiliary projection. Reference planes can be placed parallel to the vertical projection (A), the profi le projection (B), or the horizontal projection (C).


HV P

D

D

D1

D1

DISTANCE (D) TRANSFERREDTO H1 PROJECTION

PROJECTIONPERPENDICULARTO H1 REFERENCE

INDICATESRIGHT ANGLE

1 H

HV

P

2 H

1V1P

2V 2P

3H

4H

3V

4V3P

4P

ALL LINES ARE PARALLEL

5 HHV

P

6 H

5V5P

6V 6P

7H

8H

7V

8V

7P

8P

1HHV

2H

1V

2V

3H

4H

3V

4V

OH

OV

POINT O INDICATES ALIGNED INTERSECTION

Figure 10-11An auxiliary reference plane must be perpendicular to its normal reference plane.

Figure 10-12Lines 1-2 and 3-4 are parallel because they appear parallel in all three of the normal reference planes.

Figure 10-13Lines must appear parallel in all three normal planes to be truly parallel. Lines 5-6 and 7-8 are not parallel because they do not appear parallel in the profi le plane.

Contrast How do a normal line and an inclined line diff er?

Parallel LinesSee Figure 10-12 for the relationship of

parallel lines in a three-view study. Line pro-jections are parallel if they appear parallel in all three reference planes. See Figure 10-13for an example in which the lines seem paral-lel in the front and top views but are not par-allel in the side view.

Figure 10-14The point of intersection aligns in the vertical and horizontal reference planes, indicating that the lines do in fact intersect.

Intersecting LinesIf two lines intersect, they have at least one

point in common. Refer to Figure 10-14 for the alignment needed to check the point of intersection of two straight lines. Lines 1-2 and 3-4 intersect at point O because point O aligns vertically in the H and V projections.

Now look at lines 5-6 and 7-8 in Figure 10-15. Do the two lines intersect? They do not because the points of intersection in the H and V projections are not aligned. The intersection appears to be at point X in the V projection, but it appears to be at point Y in the H projection. Thus, the two lines do not intersect in 3D space.

Section 10.1 Geometry in Board Drafting 335

5H

HV

6H

5V

6V

7H

8H

7V

8V

XH

XV

Y H

Y V

1H

HV

2H

1V

2V

3H

4H

3V

4V

P

TL

1P

2P

3P

4PHV

P

1H2H

3H

1V

2V3V

11

21

31

V1

TL

A B

Perpendicular LinesTo determine whether two lines are perpen-

dicular, you must nd the true length of one of the lines. In the projection in which one of the lines is at true length, the angle between the lines appears in its true size. Therefore, you can see whether the angle between the lines is actually a right angle.

For example, in Figure 10-16A, line 1-2 is parallel to two principal reference planes, so it appears at true length in the verti-cal projection. In this projection, you can see that line 1-2 and line 3-4 are indeed perpendicular.

In Figure 10-16B, lines 1-2 and 2-3 are oblique in the H and V projections. You must use an auxiliary projection to view one of the lines at true length. In Figure 10-16B, line 2-3 is shown at true length in an auxil-iary projection. In the auxiliary, you can see that the two lines are truly perpendicular.

Summarize How can you determine whether two lines are perpendicular?

Figure 10-15The apparent point of intersection of lines 5-6 and 7-8 does not align in the horizontal and vertical reference planes indicating that the lines do not really intersect.

Industrial Applications of LinesIt may seem that lines drawn on paper

mean little and are worth little. However, they do re ect real things, and industry at all lev-els uses them every day. For example, in areas such as navigational, architectural, and civil engineering, drafters refer to the slope, bear-ing, azimuth, and grade of a line.

SlopeA lines slope is its angle from the hori-

zontal reference plane. Slope is measured in degrees. In Figure 10-17, the true slope of a line is shown in the front view when the line is at true length. To nd the slope of an oblique line at true length, use an auxiliary projection perpendicular to a horizontal ref-erence plane. Slope is often used to describe nonvertical or nonhorizontal walls and other features that are not parallel to the normal reference planes.

Azimuth and BearingYou may have heard the terms bearing and

azimuth in connection with aviation. People who use navigational instruments use these terms to describe the position and direc-tion of aircraft in the air. The angle a line

Figure 10-16The lines shown in (A) are perpendicular in the vertical projection. Those shown in (B) are perpendicular in an auxiliary projection.


AH

HV P

BH

AV AP

BV BP

SLOPE OF A LINE

THE SLOPE OF LINE AB ISA (+) PLUS SLOPE UPWARDS

INCLINED LINE

C1HI D

1

DV

THE SLOPE OF LINE CD ISA () MINUS SLOPE DOWNWARDS

SLOPE

CP

CH

CV

DP

DHHV P

A

B OBLIQUE LINE

HV P

N 65 W ABEARING

BSAMPLEBEARING

N 60 W

S 30

W

N 1

5 E

S 45 E

AH CH

BH DH

LINE DIRECTION

TYPICALAZIMUTH120

210

100'

12'

+12%GRADE

HIGHWAY CLHV P

GRADE UPHILL

makes in the top view with a north-south line is its bearing. See Figure 10-18A. The north-south line is generally vertical, with north at the top. Therefore, right is east and left is west. Make the measurement in the horizontal projection. Dimension it in degrees (see Figure 10-18B).

A measurement that de nes the direction of a line off due north is the azimuth. It is always measured off the north-south line in the horizontal plane. It is dimensioned in a clockwise direction (see Figure 10-19).

GradeThe percentage by which land slopes is

known as its grade. Architectural, civil, and construction engineers specify the grade of land prepared for speci c purposes. For exam-ple, civil engineers must make certain that the grade of roads built in mountainous areas is not too steep. See Figure 10-20 for the scale for a highway with a 12% grade. The grade rises 12 (3.6 m) in every 100 of horizontal distance. Figure 10-17

The slope of a line in the vertical projection. (A) The slope is at true length in the front view. (B) An auxiliary plane is needed to fi nd the true length of an oblique line.

Figure 10-18(A) Identifying the bearing; (B) Examples of bearing readings

Figure 10-19Azimuth readings are related to due north.

Figure 10-20Grade is measured according to the vertical projection.


Name What measurement de nes the direction of a line o due north?

PlanesWhat are the important characteristics of planes?

As a line moves away from a xed place, its path forms a plane. In drawings, planes are thought of as having no thickness. Like true lines, they are in nitethey extend forever in each direction.

A plane can be determined by any of the following combinations:

intersecting linestwo parallel linesa line and a pointthree points not in a straight line

a triangle or any other planar (2D) surface, such as a 2D polygon

The Basic PlanesPlanes are classi ed according to their rela-

tion to the three normal reference planes. The three basic types of planes are normal, inclined, and oblique planes. As you read the following descriptions, notice that they closely parallel the descriptions of normal, inclined, and oblique lines.

Normal PlanesA normal plane is parallel to one of the normal

reference planes and perpendicular to the other two. Planes appear as edge views when they are perpendicular to a reference plane. Recall that the edge view of a plane appears as a line.

See Figure 10-21 for three examples of nor-mal planes. In Figure 10-21A, plane 1-2-3 is parallel to the vertical reference plane and perpendicular to the horizontal and pro le

Triangle ProportionsA line parallel to one side of a triangle divides the other two sides proportionately, as shown by the formula next to the illustra-tion below. The formula is stated a is to b as c is to d.

What is the length of BD?

To nd the length of BD, substitute available numbers for the letters and solve the equation.

a

b d

c=a

bcd

A B

D C

12.3'

15.5'

14.8'

For help with this math activity, go the Math Appendix located at the back of this book.

Academic Standards

Mathematics

Measurement Apply appropriate techniques, tools, and formulas to determine measurements (NCTM)


1H

HV

2H

1V

2V

3H

3V

P

EDGE VIEW

ED

GE

VIE

W

HV

P

TRUESIZE

A PLANE PARALLEL TOVERTICAL PLANE

TRUESIZE

EDGE VIEW EDGEVIEW

B PLANE PARALLEL TOHORIZONTAL PLANE

HV

P

TRUESIZE

C PLANE PARALLEL TOPROFILE PLANE

ED

GE

VIE

WE

DG

E V

IEW

HV

P

EDGE

VI

EW

1H

2H

3H

1V

2V

3V

1P

2P

3P

A

HV

P

EDGE VI

EW

HV

P

B C

perpendicular to the horizontal and pro le planes. In Figure 10-21B, the plane is paral-lel to the horizontal reference plane and per-pendicular to the vertical and pro le planes. In Figure 10-21C, the plane is parallel to the pro le reference plane and perpendicular to the vertical and horizontal planes.

Inclined PlanesAn inclined plane is perpendicular to one

reference plane and inclined to the other two. It is perpendicular to the reference plane in which it shows as an edge view. In the other two reference planes, it appears as a foreshort-ened surface.

Figure 10-22 shows examples of inclined planes. In Figure 10-22A, inclined plane 1-2-3 is perpendicular to the vertical refer-ence plane. It is inclined to the horizontal and pro le planes, where it is foreshort-ened. Figure 10-22B shows an inclined plane that is perpendicular to the horizon-tal reference plane, where it shows as a line. The other two reference planes show the

plane foreshortened. In Figure 10-22C, the inclined plane is perpendicular to the pro- le reference plane, where it shows as a line. The plane shows as a foreshortened surface in the other two reference planes.

Oblique PlanesAn oblique plane is inclined to all three

reference planes. An example is shown in Figure 10-23A on page 342. Because the oblique plane is not perpendicular to any of the three main reference planes, by de nition it cannot be parallel to any of those planes. Thus, it shows as a foreshortened plane in each of the three regular views. Figure 10-23B on page 342 shows the same oblique plane in a 3D pictorial rendering.

Contrast Explain how the characteristics of normal, inclined, and oblique planes diff er.

Figure 10-21Normal planes parallel to the vertical plane (A), horizontal plane (B), and profi le plane (C)

Figure 10-22Inclined planes perpendicular to the vertical plane (A), horizontal plane (B), and profi le plane (C)


HV

P

1H

2H

3H

1V

2V

3V

1P

2P

3P

A

OBLIQUE PLANE

1

1

1

22

2

133

3

PB

2

HV

P

AH

BH

AV

BV

AP

BP

AXV

HV

P

AH

BH

BV

AP

BP

XV

XH

XP

AVB

Board-Drafting TechniquesWhat must you know to solve problems in descriptive geometry?

Now that the basic geometric constructions have been described, you may concentrate on using the geometry to solve problems. The board drafting techniques for solving problems in descriptive geometry are much different from the CAD techniques. The difference is due to the CAD softwares ability to work in three dimen-sions. But it is important to be able to solve 3D problems without the aid of a computer.

This section begins with rather simple opera-tions and proceeds to describe the solutions to more complex problems. It should become clear as you work through the problems that Chap-ters 9 and 10 are closely related. Almost all prob-lems in descriptive geometry can be worked out using auxiliary planes. You can solve problems by knowing how to nd the following:

true length of a linepoint projection of a lineedge view of a planetrue size of a plane gure

The ability to understand and solve these problems will build the visual powers neces-sary for moving on to design problems.

Point on a LineIn Figure 10-24A, line AB on the vertical

plane has a point X. To place the point on the

Figure 10-23An oblique plane in a three-view projection (A) and a pictorial rendering (B)

line in the other two reference planes, project construction lines perpendicular to the fold-ing lines, as shown in Figure 10-24B.

Note that by using just one view, you cannot tell whether a point is located on a line. It may seem to be on a line in one view, but another view may show that it is really

Figure 10-24 To transfer the location of point X from the vertical reference plane to the other two reference planes, draw straight lines from the point parallel to the fold lines to intersect the line in the other two planes.


AHV

P

AH BH1H

1VAV

BV

AP

BP

1P

HV

P

2H

2V2P

B

HV

P

3H

3V 3P

C

HV

P

AR

B

C

A RB

S

C C

S

BR

A

A

LINE RS IS AN OBLIQUE LINE

HV

P

N

AB

NM

C C

MN

B

A

B

C

MA

HV

P

LINE MN IS AN INCLINED LINE

B

C

A

XY

BC

A

X

Y B

C C

X

A

YB

LINE XY IS A FRONTAL LINEPARALLEL TO THE VERTICAL PLANE

HV

P

A

B

C

E

F

AE B

F

C

F

C

AEB

LINE EF IS A PROFILE LINEPARALLEL TO THE PROFILE PLANE

D

S

view may show that it is really in front, on top, or in back of the line (see Figure 10-25).

Line in a PlaneA line lies in a plane if it (1) intersects two

lines of the plane or (2) intersects one line of the plane and is parallel to another line of that plane. In Figure 10-26A, line RS must be a part of plane ABC because R is on line AB and S is on BC in all three reference planes. You know that line RS is an oblique line because it is not parallel to any of the normal reference planes and is clearly not perpendicular to the reference planes.

In Figure 10-26B, horizontal line MN is constructed in the vertical projection of plane ABC. A line that is horizontal in the vertical projection is known as a level line. Projecting MN to the other reference planes shows that it is an inclined line. The top view shows the true length.

In Figure 10-26C, line XY is constructed parallel to the H/V folding line in the horizontal reference plane. Projected into the verti-cal plane, it shows as an inclined line in true length. This line is called a frontal line because it is parallel to the vertical plane.

Figure 10-25 Points that fall on a line in all projections are actually on the line. Points 1, 2, and 3 in this illustration are not on line AB, even though they appear to be in some views.

Figure 10-26 Examples of locating a line in a plane


HV

AB

C

AB

C

VO

A

HV

AB

C

AB

C

V

V

V

VO XV

B

HV

AB

C

A

B

C

V

V

V

VO

H

H

H

H

H

XV

X

C

O

A

AH

BH

AV BV AP BP

HV

P

HV

PB

HV

P

C

A

AH

AV BV AP BP

B

HV

P

TLINC

LINED

LINE

HV

P

AH

AV BV AP BP

D1

D

BH

BH1 AH1

1H

Figure 10-26D shows vertical line EF con-structed within the plane ABC. It is called a pro le line because it is parallel to the pro le reference plane. Projecting line EF to the pro- le reference shows the line in true length.

Point in a PlaneTo locate a point in a plane, project a line

from the point to the edges of the plane in which it lies. In Figure 10-27A, point O is on plane ABC. Project line AX, which con-tains point O, as shown in Figure 10-27B. Then project line AX to ABC in the horizontal reference plane, as shown in Figure 10-27C. Locate point O on the line by drawing a verti-cal projection to line AX in the horizontal ref-erence plane.

Point View of a LineA normal line projects as a point on the plane

to which it is perpendicular. In Figure 10-28A,

line AB is a normal lineit is parallel to the hor-izontal and pro le reference planes. It therefore shows as a point in the vertical reference plane. In Figure 10-28B and C, the same conditions exist. The line projects as a point on the hori-zontal plane (B) and in the pro le plane (C).

An inclined line projects as a point to an auxiliary plane (see Figure 10-29A). Place a reference plane perpendicular to the inclined line at a chosen distance and label it H/1 as in Figure 10-29B. Transfer distance D as shown for a vertical or a horizontal auxiliary projection.

To project an oblique line as a point, use two auxiliary projections. Set up the rst auxiliary reference plane parallel to the oblique line (see Figure 10-30A). Then nd the true length. Place the secondary auxiliary reference plane perpendicular to the true-length line of the rst auxiliary. Locate the point projection by transferring distance X (see Figure 10-30B).

Figure 10-27 Locating a point on a plane

Figure 10-28 A normal line appears as a point in the plane to which it is perpendicular.

Figure 10-29 A point projection of an inclined line can be found in an auxiliary projection.


HV

P

D

D

D

D1

AH

BH

BV

AV

BP

AP

TRUE LENGTH

HV

P

TRUE LENGTHX

H1

H2

X1

POINTPROJECTION

A B

H1

1

BH

DH

BV

XV

XH

CV

AV

HORIZONTALLINE DX

HV

A2 C

4 3

LINE DXTRUE LENGTH

DV

V1 V

2

4321

B1X1C1

A1 D1

LINE DX PROJECTSAS A POINT IN EDGEVIEW OF PLANE

B2

C2

A2

D2 SHORTEST DISTANCEIS TRUE LENGTH

H

H

MHNH

MV

NV

N2 M2

HV P

SHRH

RVSV

R1

N1

S2 R 2

S1

M1

H1 H 2

Distance Between Parallel LinesPoint projection is one way to show

the true distance between two parallel lines. In Figure 10-31, the parallel lines MN and RS are oblique. Two auxiliary projections are needed to nd the point projections. The rst auxiliary reference plane H/1 is parallel to MN and RS. In this plane, lines MN and RS are shown at true length. The second auxiliary reference plane H/2 is perpendicular

to the true-length lines in the rst auxiliary. The distance between the point projections of the lines is a true distance.

See Figure 10-32 for a second way to nd the distance between two parallel lines. Think of lines AB and CD as parts of a plane. Con-nect points A, B, C, and D to form the plane. Draw a horizontal line DX in the top view and project point X into the vertical view. Then draw line DX in the vertical plane. Draw

Figure 10-30 Point projection of an oblique line

De ne What is a level line, a frontal line, and a pro le line?

Figure 10-31 Construct the point projection of two parallel lines to nd the true distance between them. In this illustration, the two lines are oblique, so two auxiliary planes must be used to achieve the point projection.

Figure 10-32 Find the distance between two parallel lines by forming a plane.


DH

CVAV

HV

DV

C1

A1D1

A2TL

H 2

DC

CH

AH

P

SHORTESTDISTANCE ISTRUE LENGTH

H1

DH

CV

DV

C1

B1

D1

CH

AH

HV

BH

AVBV

A1

A

HV

SKEW LINESNONPARALLEL AND NONINTERSECTING

V1 V 1

SHORTESTDISTANCE

DHCH

AH

BH

CV

DV

AVBV

C1

B1

D1

A1

X1

X2

C2

B2

D2

A2

12

LINE ABEXTENDED

B

the rst auxiliary plane V/1 perpendicular to DX in the vertical view. Find the edge view of plane ABCD by transferring distances 1, 2, 3, and 4 as shown. The secondary auxiliary V/2 shows the true lengths of AB and CD because plane ABCD is in true size in this view. Mea-sure the true distance between the lines per-pendicularly from AB to CD as shown.

Distance Between a Point and a Line

To nd the shortest distance from a point to a line, project the line as a point. In Figure 10-33, project point A and oblique line CD into the rst auxiliary projection H/1. In H/1, label the true length of line CD. Place the secondary aux-iliary H/2 perpendicular to line CD, and proj-ect line CD as a point in this plane. As shown, the distance between points in this projection is true length.

Shortest Distance Between Skew Lines

In Figure 10-34A, lines AB and CD are skew lines. That is, the two lines are not par-allel, do not intersect, and are both oblique. The shortest distance between these two lines is a perpendicular line between one line and the point view of the other line.

To nd the shortest distance between lines AB and CD in Figure 10-34, rst nd the true length of CD in the rst auxiliary. Do this by plac-ing a V/1 reference line parallel to line CD. See Figure 10-34B. Place the secondary auxiliary reference 1/2 perpendicular to the true length of line CD. Find the point projection of line CD and extend line AB as shown. Then construct a per-pendicular line from the point projection of CD to line AB. Extend line AB so that it intersects the perpendicular line at point X. Then transfer the intersecting projection back to the rst auxiliary, as shown on the extension of line AB.

Figure 10-33 Finding the shortest distance from a point to a line

Figure 10-34 Distance between skew lines

De ne What are skew lines?

True Size of an Inclined PlaneIn Figure 10-35, plane ABC shows as an

edge view in the top view. Place the auxiliary ref-erence plane H/1 parallel to the edge view and make perpendicular projections. Transfer the distances X, Y, and Z as shown to nd the true size of the plane in the rst auxiliary projection.


CV

AV

BV

C1

A1

HV

X1

Y1

Z1H1

CH

AH

BH

TRUESIZE

NOTTRUE SIZE

X

Y

Z

INCLINEDPLANE

B1

CV

AV

BV

C1

A1

XH

CH

AH

BH

HV

XV

B1X1V

1

OBLIQUE PLANE

A

LINE BX PLACED PARALLEL TO H/V REFERENCE

CV

AV

BV

C1

A1

XH

CH

AH

BH

HV

XV

B1X1V1C2

A2

B2

X2

TRUE SIZE

EDGE VIEW

V2

B

CV

C1

B1

CH

AH

BH

AV

BV A1

A

V1

HV

TL

TL

TRUE ANGLE

HV

TRUE ANGLE

M

S

1V

S

NA

M

N

A

N

M

A

S

N

S

A

M

LINE NA PLACEDPARALLEL TO H/VREFERENCE

2V

B

TL

TL

True Size of an Oblique PlaneWhen plane ABC in Figure 10-36A is

projected onto a plane perpendicular to any line in the gure, it shows an edge view in the rst auxiliary. In the top view, draw a line BX parallel to the reference plane. Place reference line V/1 perpendicular to the front view of BX. Project the front view of BX into a point projection in the rst auxiliary. The point projection is in the edge view of plane ABC as shown. Place the second auxiliary reference line V/2 parallel to the edge view, as shown in Figure 10-36B. The projection of plane ABC in the secondary auxiliary shows the true size.

True Angles Between LinesWhen two lines show at true length, the

angle between them appears in its true value. In Figure 10-37A, the two lines show as an inclined plane. This is so because the vertical view shows that lines AB and AC coincide, or lie, in a single line. Place the V/1 auxiliary reference parallel to the two lines in the vertical view. The auxiliary view shows the two lines at true length, so it also shows the true angle between the lines.

Figure 10-35 True size of an inclined plane

Figure 10-36 True size of an oblique plane

Figure 10-37 Finding the true angle between oblique lines using two auxiliary planes


In Figure 10-37B, oblique lines MS and NS do not show in an edge view. To nd the angle between the lines, use two auxiliary planes. The rst reference plane is perpendicular to the plane formed by lines NA and MS. The

second reference plane is parallel to the rst auxiliary view. That is, it is parallel to the edge view of lines MN and NS. The secondary auxil-iary view shows MN and NS at true length, so the angle between the two lines is in true size.

Section 10.1 AssessmentAfter You Read

Self-Check 1. Explain how to identify points in three-

dimensional (3D) space. 2. List and describe the three basic types of

lines. 3. List and describe the three basic types of

planes. 4. Describe how to use board techniques

to solve descriptive geometry problems.

Academic IntegrationMathematics

5. Calculate Grade George is working as an assistant drafter to a civil engineer working on a new road that will go up a mountain. If he is allowed a +12% grade to keep the road from becoming too steep, how much can the grade rise over a horizontal distance of 6,500?

Use Variables and Operations

If a 12% grade equals a 12 rise for every 100 feet of horizontal distance, then the problem can be solved with the equation 12x = 6,500, where x = the distance the grade will rise.

Drafting Practice 6. In Figure 10-38, nd the true length

of line AB. Determine the true length and slope of line CD. This problem is laid out on a grid. Assume that the size of the larger squares is .5. Some of the .5 squares have been subdivided into .125 squares.

Figure 10-38

Go to glencoe.com for this books OLC for help with this drafting practice.

HV

HV

AH

AV

BV

BH

DH

CH

DV

CV


Solving Descriptive Geometry Problems with CAD

10.2

Connect As you read this section, use notetaking methods to organize information and then develop an outline of important points.

Content Vocabulary user coordinate system

Academic VocabularyLearning these words while you read this section will also help you in your other subjects and tests. previous

Graphic OrganizerUse a chart like the one below to organize notes about solving descriptive geometry problems using CAD.

Go to glencoe.com for this books OLC for a downloadable version of this graphic organizer.

Academic Standards

English Language Arts

Use written language to communicate e ectively (NCTE)

Mathematics

Geometry Analyze characteristics and properties of two- and three-dimensional geometric shapes and develop mathematical arguments about geometric relationships (NCTM)Measurement Apply appropriate techniques, tools, and formulas to determine measurements (NCTM)

NCTE National Council of Teachers of English


Solving Descriptive Geometry Problems Using CAD

3D Coordinate System Drawing in 3D

Section 10.2 Solving Descriptive Geometry Problems with CAD 347

X AXIS(WIDTH)

Y AXIS(HEIGHT)

Z AXIS(DEPTH)

QUADRANT I

X

+ Z

Y

Using 3D Coordinate Systems with CADWhat advantage does CAD have over board drafting in solving descriptive geometry problems?

You can use CAD in two ways to solve descrip-tive geometry problems. First, you can use a CAD system to solve problems exactly as you do using board techniques. That is, you can create 2D auxiliary views and revolutions to solve the problems. To use this technique, you can use the commands and techniques you learned in previous chapters. Follow the directions given in Section 10.1 to solve the problems.

However, it is more practical to use the full power of the CAD system to solve descrip-tive geometry problems. CAD programs have several commands that allow you to perform location and identi cation procedures with-out building elaborate geometric construc-tions. To solve descriptive geometry problems using CAD, create a 3D model and simply apply the appropriate commands.

As you may recall from Chapter 6, working in 3D space requires the addition of a depth axis to the standard 2D Cartesian coordinate system. Figure 10-39 shows the relationship of the X, Y, and Z coordinates used in 3D drawing.

The World Coordinate SystemBy default in AutoCADs 2D workspaces,

the computer screen is parallel to the plane formed by the X and Y axes, and the Z axis is perpendicular to the screen. The origin (inter-section of the axes) is at the bottom left cor-ner of the drawing area. In other words, the top right quadrant (quadrant I) of the Carte-sian coordinate system is visible. The shaded portion of Figure 10-39 represents quadrant I. This default viewing con guration is known in AutoCAD as the world coordinate system (WCS).

User Coordinate SystemMost CAD programs allow you to de ne

new coordinate systems as necessary. In Auto-CAD, a user coordinate system (UCS) is a user-de ned orientation of the X, Y, and Z axes of the Cartesian coordinate system. Using the UCS command, you can align a new UCS with any planar object, which means that you

can create a special UCS to use with any auxil-iary plane you may need.

Two of the most often used options of the UCS command are the Origin option and the 3 Points option. Both options are available on the UCS toolbar. The Origin option allows you to move the origin (coordinates 0,0,0) to any point in 3D space without changing the orientation of the axes. The 3 Points option allows you to specify a new origin and a new UCS by choosing a point on the positive X axis and a point on the positive Y axis.

UCS IconNotice the X and Y arrows at the bottom

left corner of the drawing area. They make up the UCS icon. Its purpose is to show the cur-rent orientation of the coordinate system. The lines and arrows show the position of the X, Y, and Z axes. When the WCS is the current system, you cannot see the Z arrow because it points straight back perpendicular to the screen. However, the UCS icon can be very useful when you have de ned one or more user coordinate systems. It helps keep you ori-ented to the current system.

Figure 10-39 For working in 3D space, you must add the Z, or depth, axis to the familiar Cartesian coordinate system.

Describe What is the AutoCAD User Coordinate System?


1"

A B

5" SQ

Drawing in Three DimensionsWhy is drawing objects in 3D space helpful for solving descriptive geometry problems in CAD?

CAD programs provide many ways to draw objects in 3D space. In AutoCAD, these include:

drawing objects with a speci ed thicknessextruding 2D objectsspecifying XYZ coordinatesusing solid primitives (solid shapes that are prede ned in the software)

Specifying ThicknessAutoCADs THICKNESS command pro-

vides an easy method to create 3D objects. THICKNESS adds a speci c depth to a two-dimensional object (see Figure 10-40). However, it is not strictly a drawing com-mand. Instead, it is used to set the thickness of an object before beginning to draw. Then you can use many of the same commands you would use to draw a 2D object.

Practice using the THICKNESS command by creating a 5 5 5-inch cube. Create a practice drawing le, set Snap and Grid to .5, and ZOOM All. Then follow these steps:

1. Enter the THICKNESS command. Notice that the default thickness is 0. This set-ting creates 2D objects. To create the cube, change the thickness to 5.

2. Use the LINE or PLINE command to draw a 5-inch square.

3. Reenter the THICKNESS command and set the thickness to 0.

Figure 10-40 E ect of the THICKNESS command. (A) Object drawn without thickness (THICKNESS set to 0). (B) The same object drawn with THICKNESS set to 1

Because the thickness is set to 5, you have created a 5-inch cube. It looks like a simple square because you are viewing it from the default viewpoint. Next you will change the viewpoint to see the entire cube.

Setting the ViewpointTo view the cube you just created from a

different angle, you can use one of AutoCADs preset views or create a new viewpoint manu-ally. Follow these steps to explore the preset view options.

1. From the View menu at the top of the screen, select 3D Views and then SE Isometric. This displays the cube from a southeast isometric position (see Figure 10-41). Notice the position of the grid in this view.

2. Repeat step 1, but this time select one of the other preset views. Experiment until you are familiar with the various preset opportunities.

3. To return to the default view, enter the PLAN command and select W for WCS. Enter ZOOM All to see the entire draw-ing area. This view is known as the plan view.

The other way to specify a viewpoint is to use the 3DORBIT command. This command provides more exibility. You can view the object literally from any point in 3D space. Just enter the 3DORBIT command, pick with the mouse, and move the cursor slowly to view the object from any direction.

Summarize How do you use CADs THICKNESS command to create 3D objects?

Figure 10-41 In the southeast isometric view, you can see that the square you created is actually a cube.


A B C

Extruding a 2D ObjectIt is also possible to extrude a 2D object to

give it depth. This method is similar to spec-ifying a thickness, but there are some dif-ferences. Unlike the THICKNESS command, AutoCADs EXTRUDE command works on objects that have already been created. Also, the EXTRUDE command allows you to specify a taper. Figure 10-42 shows the effect of extruding an object with and with-out a taper. In addition, EXTRUDE works with RECTANGLE and POLYGON as well as LINE and PLINE. This makes the extrusion process more exible than simply specifying a thickness.

The following procedure provides practice in extruding an object and forms the basis for a descriptive geometry problem later in the chapter. Follow these steps:

1. From the View menu, select 3D Views and SE Isometric. This will allow you to see what you are doing in 3D.

2. Use the POLYGON command to create a pentagon inscribed in a .7 circle.

3. Enter the EXTRUDE command and select the pentagon. Specify an extrusion height of 2 and a taper of 5.

Specifying Individual Coordinates

Another way to create 3D objects is to determine the XYZ coordinates of each de n-ing point on the object and then draw the lines individually. This method is extremely time consuming for complex mechanical assemblies and should be used only if there is a very good reason for not using a dif-ferent method used instead. However, for geometric problem solving, coordinate speci- cation is the perfect way to locate points in a drawing.

The following procedure uses the coordi-nate method to de ne a plane that is oblique to the standard view.

1. Enter the LINE command. At the prompt, enter the following sets of absolute XYZ coordinates, pressing Enter after each set. Do not type spaces between the commas and numbers.

5,1,.5 4,2,1.5 7,6,2 8,5,0 5,1,.5 2. Use 3DORBIT or a series of preset views

to view the plane from several angles. As you can see, the plane is oblique to the X, Y, and Z axes.

3. Enter PLAN and W to return to the plan view. The plane looks like a slightly out-of-kilter rectangle in this view.

Recall What eff ect does extrusion have on a 2D object?

Using the GridAutoCADs grid becomes an

important tool when you are work-ing in three dimensions. It remains on the UCS no matter what UCS you are using or how you are viewing the object, so it becomes a useful reference.

Figure 10-42 The eff ect of extrusion: (A) the unextruded object, (B) the object extruded without a taper, and (C) the object extruded with a taper of 5


Solving Descriptive Geometry ProblemsHow do CAD commands help to solve descriptive geometry problems?

Once you have created a 3D object in a CAD system, solving descriptive geometry problems is a fairly easy task. Next you will use the pen-tagonal solid and the plane you just created to solve some representative problems.

Locating PointsTo identify the exact location of a point in

3D space, use the ID command. This com-mand identi es the exact X, Y, and Z coordi-nates of the point you specify. To demonstrate this, enter the POINT command and use the Endpoint object snap to snap to one of the endpoints of the oblique plane you created earlier. Watch the Command line. The X, Y, and Z values AutoCAD displays should match one of the points you speci ed when you cre-ated the plane (see Figure 10-43).

Points can exist as single entities in Auto-CAD. If you are attempting to locate a single point that is not on a de ned line, you must change the setting of PDMODE so that you will be able to see the point. PDMODE is a system variable in AutoCAD that controls how points are displayed on the screen. Follow these steps:

1. Enter the POINT command. At the prompt, enter a coordinate value of 1,5.8,3 to place the point at that location.

2. Enter ZOOM All to be sure you can see the entire drawing. Can you see the point? Probably not. If you can see it at all, it is just a tiny speck on the screen.

3. Enter PDMODE and then a value of 3. This changes the point display to an X that is more easily visible. Now the posi-tion of the point is clear.

4. View the point from several viewpoints. What effect does the negative X value have on the position of the point?

You can use ID to identify the exact loca-tion of single points. To do so, be sure to use the Node object snap. (Node is another term for point.)

Determining the True Length of a Line

The true length of any line in 3D space can be determined easily in AutoCAD. Simply use the DIMALIGNED dimensioning command (Aligned Dimension button on the Dimen-sion toolbar or Dashboard). Select the line whose true length you want to nd, and place the dimension. The dimension text gives you the true length. After you have determined the true length, you can erase the dimension.

This method works from any viewpoint, but it is usually easier to see the result if you return to the plan view. Notice that you do not have to create complex auxiliary views to nd the true length of a line in AutoCAD.

Determining DistancesAutoCADs DIST command provides a great

deal of information about the relative positions of two points in 3D space. Follow these steps to nd the true distance between two points on the oblique plane you created earlier.

1. Enter the DIST command. 2. For the rst point, use the Endpoint

object snap to snap to one of the end-points of the plane.

3. For the second point, snap to the end-point diagonally across the plane from the rst point. The result is displayed on the Command line.

Note: If you cannot see the distance, press the F2 key to display a text screen. Review the information that is provided. You will then know the exact distance between the two points, the change (delta) on the X, Y, and Z axes, and the angles in and from the XY plane.

Figure 10-43 The ID command gives the exact location of a point in 3D space. If you pick the point shown on the oblique plane, AutoCAD lists the X, Y, and Z coordinates as 5.000, 1.000, and 0.5000, respectively.


A B

M

N

M

N

Finding the Shortest Distance Between Skew Lines

As you will recall, skew lines are lines that are not parallel and do not intersect. The method for determining the shortest distance between two skew lines is similar to the method used in board drafting. Obtain the point view of one of the lines, and then draw a line from the point view to the other line. Use the Perpen-dicular object snap to ensure that the new line is perpendicular to the second line.

Identifying Piercing PointsUsing AutoCAD, you can nd the point

at which a line pierces a plane regardless of the planes orientation. The following proce-dure creates an oblique plane and a line that passes through the plane and then demon-strates how to nd the piercing point. Refer to Figure 10-44 and follow these steps:

1. Save the rst practice drawing as directed by your instructor, and begin a new drawing.

2. Be sure that your UCS is set to World and that you are viewing the plan view. Then create an oblique plane ABC by specify-ing the following coordinate values:

3,1,2 2,4,1 1,2,3 3,1,2

3. To create line MN piercing plane ABC, rst move the UCS icon parallel to plane ABC. To do this, enter the UCS command and then enter 3 to enter the 3 Points option. (Recall that you can use three points to de ne a plane.) Locate the endpoints of plane ABC by snapping to point B, then point C, and then point A. The UCS icon jumps onto the lower left corner of the plane, which is now located at point B.

4. Create a line starting in front of plane ABC at coordinates 1.6,2,2 and ending at

1.6,2,2. Notice that the only coordinate that changes is the Z coordinate. Drop line AP from the endpoint of A perpen-dicular to line MN. Enter the ID com-mand and select the intersection of lines MN and AP, or select the point P. The coordinate value of that point should be 1.6,2,0. This is the point at which line MN intersects plane ABC.

5. To return to the WCS, enter the PLAN command and then W (for World).

Locating the Angle Between Intersecting Planes

The procedure for nding the angle between intersecting planes is similar to the procedure for nding the true length of a line. You can use the dimensioning command DIMANGULAR (the Angular button on the Dimension toolbar or Dashboard) to nd the angle directly. You do not need to create auxiliary views.

Viewing the True Shape and Size of a Plane

Using AutoCADs dimensioning com-mands, you can dimension a plane correctly without actually seeing the plane in its true size and shape. However, you may nd it nec-essary at times to view the true size and shape of an inclined or oblique plane. The easi-est way to accomplish this is to de ne a user coordinate system that lies on the plane.

None of the ve sides of the pentagonal object created earlier in this chapter is par-allel to a normal viewing plane. To see the true shape and size of one of the sides, follow these steps:

1. Switch to the NE Isometric view of the drawing.

2. Enter the HIDE command to remove hid-den lines. (This is not absolutely necessary, but it makes it easier to see and select the

Figure 10-44 (A) An oblique plane and a line that pierces the plane. (B) Draw a line from a point on the plane and perpendicular to the line. The intersection of this line and line MN is the piercing point.


TRUESIZE

B

POINT ONPOSITIVE YAXIS

ORIGIN OFNEW UCS

A

POINT ONPOSITIVE XAXIS

points in the following steps. You may also want to move any interfering objects out of the way before you continue.)

3. Enter the UCS command. Enter N to cre-ate a new UCS. When the list of creation options appears, enter 3 (for 3point).

4. For the origin of the new UCS, use the Endpoint object snap to pick the bottom of one of the sides as in Figure 10-45A. For the point on the positive X axis, pick the bottom of the other side of the pla-nar surface. For the point on the positive Y axis, pick the top of the line on which you speci ed the origin. Notice that the UCS icon moves to the new origin.

5. Enter the PLAN command, and enter C for Current UCS. You can see by the grid that the planar surface is now parallel to the screen. You are now viewing the true size and shape of the surface, as shown in Figure 10-45B.

Note: To return to the plan view of the WCS, enter the PLAN command and enter W for World.

Compare How do points di er in board drafting and CAD?

Figure 10-45 Create a new UCS using the 3-point method. Specify the points as shown in (A). The plan view of the new UCS is aligned with the screen and shows one face of the solid at its true size and shape (B).

Section 10.2 AssessmentAfter You Read

Self-Check 1. Summarize how to create points, lines,

planes, and solids in 3D space with CAD. 2. Explain how to solve descriptive geom-

etry problems with CAD.

Academic IntegrationEnglish Language Arts

3. This section refers to the Cartesian coor-dinate system (p. 348). In your own words, de ne the system, using research resources if necessary, and explain how it can be viewed in AutoCAD.

Drafting Practice 4. In Figure 10-46, locate point D in the

plan view (horizontal projection). Deter-mine the length of line AD.

Go to glencoe.com for this books OLC for help with this drafting practice.

Figure 10-46

HV

AH

BH

CH

AV

BV

CV

FV D

V


Section 10.1 A point is used to identify the intersection of two lines or corners on an object.The basic types of lines are normal (perpen-dicular to one of the three reference planes), inclined (perpendicular to one of the three reference planes but does not appear as a point in that plane), and oblique (inclined in all three reference planes)The basic types of planes are normal (parallel to one of the normal reference planes and perpendicular to the other two planes), inclined (perpendicular to one reference plane and inclined to the other two), and oblique (inclined to all three reference planes).Understanding basic geometric construc-tions is crucial to solving 3D problems in descriptive geometry.

Section 10.2 CAD programs allow drafters to work directly in 3D space, offering an alterna-tive to traditional geometry methods.Preparation for solving descriptive geome-try problems using CAD involves creating a 3D model and applying the appropri-ate commands related to the speci c problems.Methods of drawing objects in 3D space using CAD include drawing objects with a speci ed thickness, extruding 2D objects, specifying XYZ coordinates, and using solid primitives.In AutoCAD, a user coordinate system command can be used to align a new UCS with any planar object, allowing you to create a special UCS to use with any auxil-iary plane you need.

Chapter Summary

Review Content Vocabulary and Academic Vocabulary 1. Use each of these content and academic vocabulary terms in a sentence or drawing.

Content Vocabulary descriptive geometry (p. 333) slope (p. 338) bearing (p. 339) azimuth (p. 339)

grade (p. 339) point projection (p. 345) user coordinate system (UCS) (p. 350)

Academic Vocabulary structure (p. 333) identify (p. 333) previous (p. 350)

Review Key Concepts 2. Explain how to locate points in three-dimensional (3D) space.

3. Describe the three basic types of lines. 4. Describe the three basic types of planes. 5. Summarize how to solve descriptive geometry problems using board-drafting techniques. 6. Outline how to create points, lines, planes, and solids in 3D space with CAD. 7. Explain how to solve descriptive geometry problems with CAD.

Review and Assessment10


Technology 8. Discovering New and Emerging

TechnologiesStaying informed about new technologies

is essential when working in a career such as mechanical drawing, which relies heavily on computers and digital imaging tools. What are some strategies to use when studying new technologies? Where can you nd informa-tion about emerging trends that can enhance your career? How can you nd more informa-tion about software updates from companies such as Autodesk? Using a word processing template, create a chart that shows types of technology in mechanical drawing along with resources to use to help stay up-to-date.

9. Information ProcessingMost large companies have human resources

departments that deal with personnel func-tions, such as recruiting, performance evalu-ation, and compensation. Contact a human resources professional at a local staf ng agency and ask what responsibilities he or she has. How does an ef cient human resources depart-ment bene t a company? Write a one-page summary of your ndings.

Mathematics 10. Making Conversions

Imagine that you are working for a design rm that regularly uses English standard mea-surements. One of the rms clients needs to see measurements in metric. This client has asked you to convert the total length of the order from feet to meters. The total length in feet is 244. How many meters is this?

ConversionsFeet multiplied by 0.3048 equals an equiv-

alent length in meters. Multiply the total length in feet by 0.3048 to get the length in meters.

Win Competitive Events

12. Effective CommunicationOrganizations such as SkillsUSA offer a

variety of architectural, career, and draft-ing competitions. Completing activities such as the one below will help you pre-pare for these events.

Activity Work in groups of ve or six. Have two or three members of the group, at different times, stand behind the group and slowly describe an object that is unknown to group members. Members may take notes during the description and then must try to draw the object.

Multiple Choice QuestionDirections Choose the letter of the best answer. Write the letter for the answer on a separate piece of paper.

11. The icon whose purpose is to show the current orientation of the coordi-nate system is the

a. WCS b. plan view c. UCS d. skew line

TEST-TAKING TIP

Even though the rst answer choice you make often is correct, do not be afraid to revise an answer if you change your mind after thinking about it.

Prep For

Go to glencoe.com for this books OLC for more information about competitive events.

Review and Assessment 355

HV

LH

LV

MV

MH

Problems10Drafting Problems

The problems in this chapter can be performed using board-drafting or CAD techniques. Each problem is laid out on a grid. Assume the size of the larger squares to be .5. Some of the .5 squares have been subdivided into .125 squares. Use this information to complete the problems. If you are using a CAD system, recreate the geometry in the CAD system and then use the appropriate CAD techniques to complete the problems.

Figure 10-47

2.

In Figure 10-48, what is the bearing of line NO located on plane XYZ? Deter-mine the true size of plane XYZ.

HV

XH

YH

ZH

XV

YV

ZV

NV

OV

Figure 10-48

1.

In Figure 10-47, determine the angle LM makes with the vertical plane. What is the bearing?


3. In Figure 10-49, complete the plan view of plane ABCD and develop a side view.

4. In Figure 10-50, nd the edge view of plane ABCD and determine the angle it makes with the horizontal plane.

HV

AH

AV

BV

DVC

V

Figure 10-49

5. In Figure 10-51, complete the three views showing the intersection of AB and EF.

HV

AH

AV

BV

DV

CV

CH

BH

DH

XV

XH

RELOCATE D TO ALIGNWITH ABC IN H/1

V

H 1

Figure 10-50

6. In Figure 10-52, draw the front view of line AB, which intersects line CD. What is the distance from C to A?

HV

AH

EV

EH

BH

F V

F H

P

AP

Figure 10-51

HV

AH

CV

DH

BH

DV

CH

BV

Figure 10-52

Problems 357

Problems10

8.

In Figure 10-54, determine the true size of oblique plane ABC. Draw line XY parallel to plane ABC in the plan view.

10.

In Figure 10-56, nd the true angle between lines AB and BC.

9.

In Figure 10-55, draw the true size of plane ABC and dimension the three angles of the plane.

HV

AH

CV

BH

CH

AV

BV

1H

2H

3H

ASSUME THAT POINT 1 TOUCHES PLANE ABC

Figure 10-53

HV

AH

BH

CH

XP

YPP

AV

BV

CV

Figure 10-54

HV

AHB

H

CH

AV

BV

CV

Figure 10-55

HV

AH

BH

CH

AV

BV

CV

Figure 10-56

7. In Figure 10-53, create a location for plane 1-2-3 in the vertical plane.


11.

In Figure 10-57, determine whether line MN pierces the plane.

HV

AH

BH

MH

AV

BV

MV

NH

NV

CH

DH

CV

DV

Figure 10-57

Challenge Your Creativity

1. Design a set of collapsible sawhorses using steel components. They are to be 25.00(635 mm) high. The top is to be 4.00(100 mm) wide by 38.00 (965 mm) long. Design the sawhorses to fold into the smallest possible size. Have the legs spread at an oblique angle to the top member. Use adequate bracing to make them sta-ble. Make a complete set of working draw-ings and a materials list.

Teamwork

2. Work as a team to design a piece of play-ground equipment for children. The basic design should include round steel or alu-minum tubing with welded joints. (See Chapter 15 for more information about welding drafting.) Each team member should rst work independently to develop basic design sketches. Design the apparatus to give children a safe and enjoyable experi-ence. Each member of the team should be responsible for the development of some aspect of the nal set of drawings and a materials list.

Design ProblemsDesign problems have been prepared to challenge individual students or

teams of students. In these problems, you should apply skills learned mainly in this chapter but also in other chapters throughout the text. The problems are designed to be completed using board drafting, CAD, or a combination of the two. Be creative and have fun!

Problems 359

Customize Your Workspace

Your Project AssignmentUse what you have learned in Chapters 610

to create a complete set of drawings for an origi-nal design of your own. Your challenge is to:

Design a custom desk organizer to hold your board-drafting supplies.

Choose the shape and number of compart-ments for your organizer.

Measure your organizer to be less than 1 __ 5 , or 20 percent of the surface size of your desk.

Make sure that your organizer can hold a minimum of three drafting supplies.

TIP! Basic supplies might include a calculator, pencils, or clips. What other items do you wish to store?

Draw a complete series of design views to illustrate the various dimensions of your organizer.

Create a three- to ve-minute presentation in which you discuss the steps you took to complete your drawings, the materials you recommend using for the organizer, and the

drafting principles involved in formalizing your design.

Applied SkillsWrite a brief description of the item you are creating.

List the steps you will take to complete your nal drawing.

Explain how you arrived at the appropri-ate measurements and dimensions for your organizer.

Research and recommend the speci c materi-als needed to construct your organizer.

Draw your plans to match your specs!

The Math Behind the ProjectThe primary math skills you will use to com-

plete this project are geometry modeling, alge-bra, and measurement. To get started, remember these key concepts, and follow this example:

Geometry Calculating AreaThe area of a gure is the number of square

units, or in this case, inches, needed to cover a surface. To nd the area of your desk, rst mea-sure the length and width and then calculate the area using the formula A lw, where l repre-sents the length, w represents width, and A rep-resents the area of the rectangle of your desk.

For example, if the width of your desk is 16 and the length is 24, the total area would be:

Area = 16 24288 = 16 24The surface area of the desk is 384 in2.

Math Standards

Geometry Use visualization, spatial reasoning, and geometric modeling to solve problems. (NCTM)

Measurement Apply appropriate techniques, tools, and formulas to determine measurements, techniques, tools, and formulas to determine measurements. (NCTM)


Hands-On Math ProjectUNIT 2

360 Chapter 4 Basic Drafting Techniques

AlgebraCalculating PercentageTo calculate the 20 percent of the surface

area available for your holder, use the formula P (Percentage) R (Rate) B (Base) where the rate of 20% is the same as 1 __ 5 or .20.

P .20 38420% of 384 is 76.8

TIP! Because in this example you have no more than 76.8 in2, you should estimate to a round number less than 76.8.

Determining Measurement Then, to calculate the size of your holder, you

can determine the length and width by using the area formula again.

A lw A 75 in2

To nd a length and a width measurement that can be multiplied to equal a number close to 75. Two possibilities would be:

75 in2 5 wide 15 long75 in2 6 wide 12.5 long

ErgonomicsYou have probably seen the word ergonomics

used to describe o ce equipment such as desks and

chairs. Ergonomics is an applied science concerned

with designing and arranging things people use so

that they interact most e ciently and safely. Ergo-

nomics is sometimes referred to as human factors

engineering.

A human factors engineer who designs workspaces

would consider many ergonomic factors, such as:

human anatomy and psychology

lighting and noise

human/computer interaction

Research Activity Research the terms ergonomics

and human factors engineering. How are they similar

and di erent? In what ways might ergonomics a ect

the design of your desk organizer? Write a one-page

summary of your ndings.

Bonus! Incorporate your ndings into the design of

your desk organizer and explain what you have done.

Go to this books OLC at glencoe.com for more information on ergonomics and human factors engineering.

Unit 2 Hands-On Math Project 361Car Culture/Corbis

UNIT 2 Hands-On Math Project

Project Steps: Get Ready, Get SetDraw!

STEP 1 Research

Explain the objectives you want to accom-plish through your design. What will you store in your organizer? Would you rather use an organizer with a round shape or a square or other shape? Why?

List the steps you will complete to make your nal drawing.

Research elements of your design object that will in uence the way you set up your drawings.

Investigate possible materials you might use in the construction of your organizer.

TIP! You can conduct research online, skim periodicals specializing in design, or visit a store that carries desk organizers.

STEP 2 Plan

De ne and write out your overall goal for this project.

Gather the appropriate supplies and tools for board drafting.

Measure and record the surface area of your desk or tabletop.

Calculate 1 __ 5 or 20 percent of this surface to determine the size of your organizer.

Set up to prepare your drawing le with AutoCAD.

STEP 3 Apply

Create a basic sketch or CAD drawing of your design and write a brief description of the item you are creating.

Prepare one multiview drawing of your design.

Prepare one sectional view of your object showing the insides and/or other part(s) not easily seen.

Add dimensioning and a materials list to your basic sketch or CAD drawing.

TEAMWORK Ask a classmate to review your design project drawings before you continue. Ask for feedback on the technical aspects of your drawing as well as the overall concept.

STEP 4 Present

Prepare a presentation combining your research with your completed drawings using the checklist below.

Presentation ChecklistDid you remember to

state your objectives for the design concept?

describe the features of your organizer?

use a presentation program for your slides?

write notes you might need for your presentation?

demonstrate the basic sketch or CAD drawing?

show the multiview and sectional view of your organizer?

Refer to the math concepts on the previous pages, or go to glencoe.com for this books OLC for more information on the math concepts used in this project.

362 Chapter 4 Basic Drafting Techniques

STEP 5 Evaluate Your Technical and Academic Skills

Assess yourself before and after your presentation.

Is your research thorough?Did you plan your steps carefully?Did you organize your visuals so that they showcase your ideas?Is your presentation creative and effective?During your presentation, do you make eye contact and speak clearly enough?

Rubrics Go to glencoe.com for this books OLC for a printable evaluation rubric and Academic Assessment.

1.2.3.

4.5.

Highlighting Academic Skills and AchievementsA good portfolio includes samples of coursework in your eld of interest. It should also include examples that high-light other aspects of your life such as hob-bies, and special skills and interests. Some of these examples might come from work you have created for other classes.

Highlight your communications and math skills: Potential employ-ers are interested in hiring employ-ees with good writing and math skills. Include in your portfolio any reports you have written in English or history, creative writing, and math and science projects you feel show-case your talents well.

Awards and citations: If you have received awards or citations for sports or community activities, include them in your portfolio.

Samples of your work: Now that you have completed the desk orga-nizer design project for this unit, include your drawings as samples of your work in your portfolio.

Save Your Work In the following units, you will add more elements to your portfolio. Keep the items for your portfolio in a special folder as you progress through this class.

1.

2.

3.

Unit 2 Hands-On Math Project 363Paul Barton/Corbis

Glencoe Mechanical DrawingTable of ContentsUNIT 1: Discovering Drafting FundamentalsChapter 1: Drafting CareersSection 1.1: Identifying Drafting CareersSection 1.2: Preparing for a Career in DraftingDo The Math: Estimated Living ExpensesReview and Assessment

Chapter 2: Design and SketchingSection 2.1: Design and Freehand SkeetchingSection 2.2: Computer-Aided SketchingDo The Math: Ratio and ProportionCAD TIP: Annotative TextReview and AssessmentProblems

Chapter 3: Drafting EquipmentSection 3.1: Board Drafting EquipmentDo The Math: Measuring AnglesSection 3.2: CAD EquipmentCAD TIP: Monitors and Personal SafetyReview and AssessmentProblems

Chapter 4: Basic Drafting TechniquesSection 4.1: Getting Ready to DrawCAD TIP: ZoomingCAD TIP: Loading LinetypesSection 4.2: Creating a DrawingDo The Math: Decimal DegreesCAD TIP: Coordinate ValuesReview and AssessmentProblems

Chapter 5: Geometry for DraftingSection 5.1: Applied Geometry for Board DraftingDo The Math: Geometry FormulasSection 5.2: Applied Geometry for CAD SystemsCAD TIP: Presetting Object SnapsCAD TIP: Object TrackingReview and AssessmentProblems

Unit 1: Hands-On Math Project Create a Logo

UNIT 2: Developing Drafting TechniquesChapter 6: Multiview DrawingSection 6.1: Understanding Orthographic ProjectionDo The Math: Lines, Line Segments, and RaysSection 6.2: Creating a Multiview Drawing Using CADCAD TIP: LINE and XLINE CommandsCAD TIP: Exploding a Solid ModelReview and AssessmentProblems

Chapter 7: DimensioningSection 7.1: Basic Dimensioning PrinciplesDo The Math: Volume and WeightSection 7.2: Dimensioning TechniquesCAD TIP: Associate DimensioningReview and AssessmentProblems

Chapter 8: Sectional ViewsSection 8.1: Types of Sectional ViewsSection 8.2: Techniques for SectioningDo The Math: Metric ConversionsCAD TIP: 3D CAD SectionsReview and AssessmentProblems

Chapter 9: Auxiliary ViewsSection 9.1: Developing Auxiliary ViewsSection 9.2: Drawing Secondary Auxiliary ViewsCAD TIP: Center-Plane ConstructionDo The Math: Angles of RotationReview and AssessmentProblems

Chapter 10: Descriptive GeometrySection 10.1: Basic Descriptive Geometry and Board DraftingDo The Math: Triangle ProportionsSection 10.2: Solving Descriptive Geometry Problems with CADCAD TIP: Using the GridReview and AssessmentProblems

Unit 2: Hands-On Math Project Customize Your Workspace

UNIT 3: Exploring Drafting ApplicationsChapter 11: FastenersSection 11.1: Types of FastenersSection 11.2: Drawing Screw Threads and FastenersDo The Math: Calculating the Depth of ThreadsCAD TIP: Saving Your WorkReview and AssessmentProblems

Chapter 12: Pictorial DrawingSection 12.1: Types of Pictorial DrawingDo The Math: Area of a TriangleSection 12.2: Creating Pictorial DrawingsCAD TIP: The Ortho ModeReview and AssessmentProblems

Chapter 13: Working DrawingsSection 13.1: Understanding Working DrawingsSection 13.2: Preparing a Working DrawingCAD TIP: Displaying the Layout TabsDo The Math: Calculating Corner Clearance for a Hex NutReview and AssessmentProblems

Chapter 14: Pattern DevelopmentSection 14.1: Principles of Pattern DevelopmentDo The Math: Calculating VolumeSection 14.2: Drawing Pattern DevelopmentsCAD TIP: Zooming DynamicallyReview and AssessmentProblems

Chapter 15: Welding DraftingSection 15.1: Types of Joints, Welds, and SymbolsDo The Math: Temperature ConversionsSection 15.2: Producing a Welding DrawingCAD TIP: Custom Welding SymbolsReview and AssessmentProblems

Chapter 16: Pipe DraftingSection 16.1: Pipe SystemsSection 16.2: Creating Pipe DrawingsDo The Math: Pipe Length for BendsReview and AssessmentProblems

Chapter 17: Cams and GearsSection 17.1: CAMs and CAM DrawingsSection 17.2: Gears and Gear DrawingsDo The Math: Gear RatioCAD TIP: Smooth Circle RepresentationsCAD TIP: Removing Division MarksReview and AssessmentProblems

Unit 3: Hands-On Math Project Harvest Rainwater

UNIT 4: Applying Drafting SkillsChapter 18: Architectural DraftingSection 18.1: Understanding Residential ConstructionDo The Math: Roof Pitch AnalysisSection 18.2: Creating Architectural Working DrawingsCAD TIP: Aligning MultilinesReview and AssessmentProblems

Chapter 19: Map DraftingSection 19.1: Types of MapsDo The Math: Statute Miles to KilometersSection 19.2: Creating Contour Maps and PlatsCAD TIP: Determining AcreageReview and AssessmentProblems

Chapter 20: Electricity/Electronics DraftingSection 20.1: Types of Electrical and Electronic DiagramsDo The Math: Algebra and Ohm's LawSection 20.2: Drawing Electrical and Electronic DiagramsCAD TIP: Streamlining TEXTReview and AssessmentProblems

Chapter 21: Media ManagementSection 21.1: Project DocumentationDo The Math: Rounding DecimalsSection 21.2: Document ManagementReview and AssessmentProblems

Unit 4: Hands-On Math Project Design an Animal ShelterAppendix A: Abbreviations and SymbolsAppendix B: Pipe SymbolsAppendix C: Reference TablesMath AppendixContent and Technical Vocabulary GlossaryAcademic Vocabulary GlossaryIndexPhoto Credit

Internet LinkSearchPrevious DocumentPage NavigatorExit

ch_10

Documents

descriptive geometry

design problems

measurements nctm geometry

twinengine design

asymmetrical design

basic types of planes

d space

burt rutan