1Chad E. Carter P.O. Box 214 Normangee Texas 77871

936-396-1713 Home830-660-3315 Mobile

Email: ninja2000zx6r@yahoo.comPassport US Valid through July 2017

Directional Drilling Proven skill set: -Deep Drilling Wells -85% of the 350+ wells I have drilled have been over 16,000 ft. 20% over 18,000 ft. I have drilled 15+ wells that have exceeded 21,000 ft. my depths have ranged from 6,000 ft. to 22,689 ft. all in feet.-Exposure/Joystick/Automated Rig - 90% of the rigs in the last 10 years that I have been on have been joystick or cyber rigs mostly H&P flex gen 2- gen 5 rigs Patterson automated rigs Cactus rocket rigs and Rowen automated rigs. All of these rigs have had the touchscreen for pumps on and off WOB, ROP, Differential pressure, Drilling Torque some have even had slider controls and rocking controls to help shift weight to the bit. -HPHT Exposure - most of the wells that I have drilled can be considered HPHT in some way temps run in the 250-275 range but have been on wells that temp has gone above 300 and needed hi temp MWD tools to be run.-Horsepower Rigs - 1,000hp-2000hp most have been 1,500hp -Experience of Managing rigs - 15years as Driller /Directional Driller 5 as a Driller 10 as a DD. As a DD I have been in charge of all aspects of the well once on location circulating kicks shutting the wells in when needed what tools are being run down hole drilling fluid being run and type of chemicals being put in the mud to extend PDM stator life. Commanding hands on what needed to be done on rig and keeping pipe count as well as types of pipe bits reamers are on location. I was over bit selection for wells. Have drilled open hole sidetracks milled windows in casing and drilled off cement plugs and whip stocks drilled on air, WBM and OBM And am proficient in LCM material being added for lost circulation and what MWD and PDM can handle as well as rotary Steerable systems. Have drilled hole sizes from 18 3/4- 6" using a wide range of bits (Tri cone PDC, hybrids and mills) Lastly keeping detailed tally books and daily reports as well as KPI conducting pre spud meetings DWOP's ordering and shipping tools and hands to location conducting pre-tour safety meeting and having stand downs when work is not being done safely.-Types of Rigs Worked - On shore/ TDS-11/ Drilling and work over rigs-mostly land rigs have been on a few inland barges 95% have had the TDS-11 top drive system but have been on conventional Kelly rigs (this is what I learned to drill on) top drives have ranged from Varco to Tesco and a few other smaller name brands.Personal Skills as a Directional Driller /Directional Drilling Coordinator/ Directional Drilling Tech Advisor- I am a natural leader with strong written and verbal communication skills.- I am very strong with hand calculations on calculator and can use a multitude of survey programs developed for directional drilling. - I am able to dissect a well from start to finish and know in advance what is ahead before I get there. - Team player - I have drilled 350+ directional wells in 17 states over 10 years as a Directional Driller. - I have Great memory recall skills - I understand the limitations of conventional directional drilling tools and how to get the most out of what tools I have to work with.

- I can write survey programs in Microsoft excel along with creating excel docs. used in field for everything from tool inventory to advanced hand calculations used while drilling a well.- I was the go to Sr. Directional Driller for all difficult wells/clients that Halliburton had in the OKC office (if Halliburton was about to be removed from location I was the one sent out to fix and bring a calm understanding to the clients and to regain control of the situation and retain the work.) - I am known for having the answers and skillset to answer the most difficult I don’t know what to do questions. (I am able to think outside the box and do what most don’t know how to do)- Working knowledge of motor builds and types of applications different motors can be used for.- Trainer/Mentor for Halliburton Directional Drillers out of the OKC office. I have trained 50+ directional drillers for Halliburton over the past 5 years.

USA states I have completed wells inTexas- all areas Nebraska- south eastLouisiana – Northwest and all along gulf coast New Mexico- eastern and central Mississippi- gulf coast Colorado- North west areaArkansas – north central Wyoming- North west and northernOklahoma- entire state South Dakota- North west Corner Kansas- southern part of the state Michigan- southernMontana- Northeast and Central Utah- south eastPennsylvania- North Central and southwest West Virginia- North westNorth Dakota- North west, southwest and central

EMPLOYMENT HISTORY:March 2010 – April 2015: Halliburton

Halliburton (Sperry Sun) F17 DV01 DD Field General highest level that can be achieved as Field hand with Halliburton. (H2S certified)

- Relief Coordinator for a total of one year. Was available to cover for all Coordinators in the OKC office. Several times I was over 8-15 rigs including 36 DD’s and 45 MWD’s at a time. Duties included monitor daily drilling reports for all rigs I was overseeing go to meeting with the Drilling Superintendent’s and Engineers. Schedule tools and hands on and off rigs monitor cost and daily activities of all jobs running. Fielded phone calls with issues and problems with the wells being drilled and offered solutions to correct and achieve the drilling goals along with stability and the integrity of the wellbore. Monitored fluid types being drilled with and kept records of mud properties to insure integrity of the tools in the hole along with number of hour’s tools had on them. Worked with shop hands and managers to ensure proper tools are shipped and maintained correctly for the jobs being run. Filled all hands timesheets into SAP and made sure expenses reports were filed correctly and updated SAP to pay hands.-Field General & Trainer with this rank within Halliburton I was able to run and complete any job that Halliburton was called out on. I am able to run all of Halliburton’s directional drilling tools that are current to mid 2015. Experience with geo-pilot and conventional mud motor systems have run packed hole assemblies, short/medium and long radius assemblies drilled extended reach wells, slim holes and all standard Directional tool sizes from 12.25 down to 4.75. I have run everything Sperry has to offer as a Directional Driller and trained a multitude of directional drillers on everything from motor builds to bit selection along with taking surveys wellbore placement hand calculations wellbore design and performance directional drilling.

-Performance drilling directional well's  For a multitude of contractors including Devon, Chesapeake, XTO, Sand ridge and EOG out of the OKC office. I have drilled over 350 wells in 17 different states in the lower 48 run all types of Survey tools from wire line tools to nuke tools along with years of experience with bit and motor selections for different well applications. -Well Planning build and model wells in Compass & Insite program owned by Halliburton. I am able to build well plans as needed and able to preform changes and updates for the Drilling Engineers and Superintendents on site sending in for final approval.

October 2008- March 2010 : DDC The Directional Drilling Company

Lead Directional Driller at DDC in Pennsylvania and West Virginia. Ran a wire line truck and drilled most wells down to KOP on air. Was able to complete all tasks set forth by DDC and Contractors for all wells we drilled.

January 2006 – October 2008: Ryan Energy Technologies USA, Inc.

Directional Driller - with Ryan Energy in September 2006.  I have drilled Horizontal wells, S wells, Build and Hold, Re-entry and Sidetracks.  Drilled according to plans made by the client and well planners.  My experience includes use of compass survey and well editing programs, Microsoft excel, hard calculate most needed formulas on calculator, leadership when on the rig floor, keep things moving in a safe and organized manner, improving down time between connections and during surveys. MWD Field Supervisor - (Trainee to Sr. Lead MWD) in charge of setting up and running the MWD Tensor Tool for operating companies.  Produced gamma logs and ran successful jobs in many different environments, knowledge in rigwatch witts systems, troubleshooting MWD problems with surface equipment and down hole tool problems with experience in different drilling environments Inside the United States, which includes Texas, Louisiana, Wyoming, North Dakota, Oklahoma, and Montana.

May 1997 - December 2005 Greywolf Drilling

Driller/Motorman/Chain hand/Floor hand Work floors (lead tong), Motorman, A/D & Driller, making connections, Trip sheets, BOP Drills, tripping pipe, rig maintenance, changing swabs, mixing chemicals, Motors includes daily maintenance, SCR house maintenance, maintaining fluid levels on motors. Driller included running rig/crew, drilling tour sheets and safety meetings. Completed well control school during this time card has since expired.

June 1994 – May 1997 OSI Inspection Services

Worked summers and weekends through high school – cleaning and drifting Casing, pipe and drill collar inspection.

PERSONAL:

Education: Graduated top half of class A&M Consolidated High School, College Station, TX - 1997

50 Hours - Blinn College - Bryan, TX attended Jr College between May 1997 and May of 2003

Health: Excellent - Non Smoker, Non Drinker

Hobbies: Hunting, Reading, drawing, puzzles, Golf, Computers, Hiking, Swimming, Travel & spending time with my wife and daughters

Passport: US Valid through July 2017

Personal: Married 8 years with Two Children

References furnished upon request.

06/16