champion sheet materials and insulation

www.championtimber.comTh

eO

ualit

yTi

mbe

rMer

chan

ts

~

Unrivalled Quality…Unrivalled Range…Unrivalled Service…

Sheet Materialand Insulation

Champion Timber

02 www.championtimber.com

Why choose Champion for your Timber?We’re the South East’s leading independent timber specialists with over 75 yearsexperience of supplying the building trade. Recently voted again one of the UK’stop performing timber merchants in a customer survey by TRADA*, we’rededicated to providing you, the professional, with the range and quality of timberthat will save you time and money.*TRADE KPI Customer Survey 2003, 2004 and 2006

Quality of product• For our Softwood Planed Timber and Mouldings, we only use prime quality

timber, then re-grade and machine it at our extensive Edenbridge mill to meetour own stringent standards.

This is sourced and imported from the most responsibly managed Nordicforestry companies.

• On-going investment in technology ensures quality, accuracy, consistency andwith our Planed Timber and Mouldings, a super smooth finish. This guaranteesyou minimal preparation and wastage, so you save time and money.

Range and breadth of stock• Machining our own timber ensures all of our branches carry a vast range of

profiles and extensive stocks, all properly kiln dried. This ensures a continualsupply of stock always ready to go for your next job.

• Our selection of around 15000 timber and timber related products ensuresmore choice and provides a credible single source solution saving youvaluable time and money

High standards of customer service• As accredited Investors in People, Champion employs helpful, knowledgeable,

motivated staff who benefit from on-going training and developmentcontinuously improving our customer service.

• Unusual or ‘one off’ jobs are no problem as we offer a prompt machine-to-orderservice from our own mills.

• Reliable, local deliveries, please contact your local branch for more details.

Always keeping ahead• As an independent company, we anticipate and react quickly to changing

customer demands and product improvements.

• We comply with all British and International regulations and guidelinesregarding sustainability of timber resources and have a clearly definedenvironmental policy.

• Nine branches already in Surrey and Kent, with more planned.

To obtain an estimate or to place anorder there are four easy options:1. Visit your local branch, we’re ready to serve you.2. Telephone your local branch, we’re ready for your call.3. Fax your request or order to your local branch.4. Email your local branch with your request or order.

Please note we accept: Visa, Mastercard,Switch/Maestro, TradePro cards. Branch details are on the reverse of this brochure.

Product range:

Timber ProductsBlockboard

Chipboard

Claddings

Cut to size Sheet Material

Decorative Boards

Decking

Doors

Fencing

Fire Rated Boards

Flooring

Glulam Laminated Beams

Hardboard

Hardwood

Insulation

Joinery

Laminates

MDF Boards

Melamine Faced and

Wood Veneered Chipboard

Oriented Strand Board

Pine Board

Plasterboard

Plywood

Sawn Softwood

Staircase Parts

Softwood Mouldings

Softwood Planed

Thermowood

Timber Buildings

Velux

Worktops

Windows

Timber AccessoriesAdhesives

Bolts

Brackets

Corrugated PVC

Decorators Aids

Door and Window furniture

Fixings

Hand Tools

Hangers

Ironmongery

Locks and Security

Mastics

Nails

Paint

Power Tools

Screws

Woodcare Products

Branch Distribution Centre – Edenbridge

Extensive range of timber in stock

Investment in technology

Profile design and matching service

Reliable deliveries

Excellent customer serviceTTF

TT-COC-1996 1996 FSC A.C.Look for FSC labelled productsFSC SupplierThe Global Benchmark forResponsible Forest Management

c

/16-37-034

Contents Cont

ents

CHAMPION at your SERVICE

Again voted by you, ourcustomers, as one of the

TOP PERFORMING TIMBERMERCHANTS in the UK

(TRADA Survey)

03

CE Certification and Marking of Panel Products and InsulationSo as to introduce universally accepted standards and thereby make trading easier between member states, the European Union has introduced CEmarking. The CE mark is confirmation that a product has been independently tested and certified as complying with the new product standard and is ‘fit for the purpose’ for which it is intended.

For panel products and insulation, the Construction Panel Directive (CPD) was set up by the industry to set standards for testing and essentialrequirements that should be considered where relevant, these being

• mechanical resistance and stability • hygiene, health and the environment • protection against noise

• safety in use • safety in case of fire • energy, economy and heat retention

The CE mark does not necessarily have to appear on every board, but can still be sold as CE or CPD compliant. If official written confirmation isrequired of compliancy, contact the Buying Department at New Malden Head Office on 020 8949 1621.

Further on in this brochure, those products that are CE/CPD compliant are identified as such under their respective headings.

‘CE’ Product Marking 03

Building RegulationsPart ‘L’ 2006

Conservation of Fuel and Power 04Examples to meet Part ‘L1B’ 05-06

Insulation Products

Rockwool Roll 07Rockwool Flexi-Slab 07Rockwool RWA45 Semi Rigid Slabs 07Rockwool Cavity Wall Batts 07Glass Fibre Rolls 07Celotex GA3000Z, Therma-Break and XR3000 08Kingspan Thermapitch TP10 08Actis Tri-Iso Super 10 09Expanded Polystyrene 09Superquilt 09Thinsulex 09Kingspan Thermaroof TR31 10Celotex Tempchek TD3115 10

Building Regulations Part 'E' 2004

Resistance to the Passage of Sound 11

Acoustic Insulation Products

Rockwool Flexi-Slab 11Reduc 12Monarfloor 13Acoustilay 14Attenu8 14

Fire Rated Sheet Material

Pyrok & Viroc or similar 15

Masterboard 15

Supalux 15

MDF FR Euro Class B & C 15

WBP Hardwood PlywoodFR Euro Class B & C 15

Water & Fire Resistant Sheet Material

Hardibacker 15

Plasterboard & Accessories

Standard 16

Foil Backed Vapour Check 16

Plank 16

Soundshield 16

Thermal Laminate 16

Phenolic Laminate 17

Moisture Resistant 17

Firecheck 17

Drywall Screws 17

Coving 17

Accessories 17

Chipboard

Standard 18

Flooring Grade T & G Type P5 18

Oriented Strand Board (OSB) 18

Blockboard 18

Door Blanks 18

Plywood

WBP Hardwood 19

WBP Birch 19

Flexible 19

BBA Approved Construction 19

Shuttering 19

T & G Flooring 19

Marine 19

Medium Density Fibreboard(MDF)

Standard 20

Light 20

V313 Moisture Resistant 20

Medex Exterior 20

ZF Ecologique 20

Bead & Butt V313Moisture Resistant 20

Flexible 20

Pre-Cut Handi-Panels

WBP Hardwood Plywood 21

MDF 21

Cut to size Service 21

Hardboard

Standard 21

Oil Tempered 21

Perforated 21

Insulation Board 21

Pinboard 21

Sundeala 'K' 21

Floor Protection Board 21

Screen Panel 22

Decorative MDF 22

Topan Coloured V313 Moisture Resistant 22

Melamine 2 Sides 22

Lacquered 1 Side 22

Wood Veneered 23

Wood Veneered Edging 23

Wood Veneered & Melamine Faced Chipboard 24 & 25

Iron-on edging 25

Wood Veneer

Flexible Veneer 26

Bonded Laminates 26

Solid Wood PanelPine Panel 26Pine Stringer 26

Pine Stair Tread 26

Oak Panel 26

Worktops

Postform Laminate 27

Solid Hardwood 27

Branch Maps & Contact Details Back Cover

WIDE RANGE with BIG STOCKS• FREE DELIVERY - to a wide area• CUT TO SIZE SHEET MATERIAL - first 2 cuts FREE• RANGE OF LENGTHS OFFERED - reduces waste • SPECIALS OUR SPECIALITY - with our Timber Profiling and

Pattern Matching service• OUR BRANCHES STOCK - all the Fixtures, Fittings, Finishes and Tools

to go with your Timber and Sheet Material

Part L1B - Work on Existing Dwellingseg. extensions, refurbishment andmaterial change of useWith the 2006 regulations, meeting the required U-value ofan element still applies

A guide to U-Values to be achieved in existing buildings to meet Part L1B (Dwellings)

NEW ELEMENTS - Thermal Bridging & Air LeakagePart L1B requires that the construction be built avoiding any thermal bridgingin the insulation layers and that attention be given to reducing air leakage.

RENOVATED ELEMENTSWhere more than 25% of the surface area of a thermal element is beingrenovated, a way of showing compliance to Part L1B is to upgrade the wholeof the element to meet the required U-Value.

RETAINED ELEMENTSRetained Elements is either as a result of a material change of use or wherean element became a thermal element as part of the thermal envelope, whenpreviously it was not. Where the U-Value of a retained thermal element is worsethan the threshold U-Value, the thermal element should be upgraded to achievethe stated U-Value. Variations may apply where the increased insulation mayreduce the usable floor area by more than 5%, or where it will create difficultieswith adjoining floor heights, or where the weight of the additional insulationmight not be supported by the existing structure.

Building Regulations Part ‘L’ 2006Conservation of Fuel and Power


In summary for New Build this means:• Part ‘L’ Compliance for new build is no longer met by just achieving

specific U-Values

• All aspects of the build design are now major factors with more emphasis on quality of build.

• Builders will require early input and greater technical support at design stage.

• There MUST BE significant improvement in U-Values

• Excessive air leakage dramatically affects fabric performance.

R-value - is the Thermal Resistance (m2K/W) of a component and iscalculated by dividing the thickness expressed in metres, by its thermalconductivity.

U-value - is an expression for the amount of heat that passes through asquare metre of building element. The lower the U-value, the lower the heatloss. U-value is calculated as the reciprocal of the sum of the thermal resistance (R-value) of each component including any cavities. i.e.

(0.35 U-Value)Full-fill Cavity75mm Rockfibre cavitywall slab

(0.25 U-Value)50mm PUR/PIR rigid foamBlock & beam T&G chipboard finish

Brick outer skin

Blockwork 3.5N

Plaster

(0.16 U-Value)100mm Rock fibreinsulation betweenjoists

150mm Rock fibreinsulation over joists

As Built 2002



Brick outer skin

Blockwork(Lambda value 0.15)

Plaster

(0.14 U-Value)100mm Rock fibreinsulation between joists


CompliantPart L 2006



Brick outer skin

Blockwork 3.5N

Plaster

(0.16 U-Value)100mm Rock fibreinsulation betweenjoists


As Built 2002



Brick outer skin

Blockwork(Lambda value 0.15)

Plaster

(0.14 U-Value)100mm Rock fibreinsulation between joists


CompliantPart L 2006

WALLS - Full-fill: Brick outer skin - 75mmcavity filled with Rock fibre Cavity Batts - 3.5N inner blockwork plastered.

FLOOR - Block and beam with 50mm PUR/PIRrigid foam and T&G Chipboard Decking.

ROOF - Concrete tiles over rafters with 100mmRock fibre quilt between joists and 150mmover.

GLAZING - UPVC double glazed windows usinglow-e soft glass.

HEATING - Gas fired condensing boiler (86%efficiency) with balanced flue supplying bothheating and hot water.

WALLS - Full-fill: Reduce the U-value to 0.28.Change the 75mm Rock fibre cavity wall slab to100mm. Change the medium density blockworkto a Lambda value of 0.15 W/mK.

FLOOR - Reduce the U-value to 0.22. Changethe 50mm PUR/PIR rigid foam to 65mm.

ROOF - Reduce the U-value to 0.14. Change thetop layer of 150mm Rock fibre to 200mm.

GLAZING - UPVC double glazed windows usinglow-e soft glass.

HEATING - Gas fired condensing boiler (90%efficiency) with balanced flue supplying bothheating and hot water.

U-value = 1(W/m2k) Total sum of R-values

U-VALUES NEW ELEMENTS EXISTING ELEMENTSTO BE ACHIEVEDELEMENT EXTENSIONS & REPLACEMENT RENOVATED RETAINED THRESHOLD

NEW ELEMENTS ELEMENTS ELEMENTS ELEMENTS (Upgraded) U-VALUE

Wall-Cavity 0.30 0.35 0.35 0.55 0.70

Wall-Other type 0.30 0.35 0.35 0.35 0.70

Floor 0.22 0.25 0.25 0.25 0.70

Roof-Flat 0.20 0.25 0.25 0.25 0.35

Roof-Sloped 0.20 & 0.20 0.20 & 0.25 0.20 & 0.25 0.20 & 0.25 0.35integral integral integral integral

Roof-Loft (joist) 0.16 0.16 0.16 0.16 0.35

Conservation of Fuel and Power - requires much more than just good insulation

Updated in April 2006, Part 'L' sets out to make buildings more energy efficient,

saving an estimated 1 million tonnes of carbon a year in the UK. For new build

energy performance standards have been increased by 20% to 28% over the

old 2002 regulations and are now based on the 'whole building' Target CO2

emission rate rather than meeting stand alone Elemental 'U' values. However

on extensions and refurbishment work to existing buildings the Elemental

U-value route may be used to show compliance.

The new Part 'L' is split into 4 parts

• L1A New Dwellings

• L1B Work on Existing Dwellings

• L2A New Buildings, other than Dwellings

• L2B Work on Existing Buildings, other than Dwellings

Part L1A - New Build for DwellingsFive processes the designer/builder must go through to showcompliance with Part 'L' of the Building Regulations

1. CALCULATE THE CO2 EMISSIONS: An Energy Performance

Certificate must be produced using the SAP 2005 (new dwellings)

or SBEM (non-dwellings) software.

2. DESIGN LIMITS REQUIRED: The thermal performance of the

building envelope, the boiler efficiency, hot water and lighting must

be within stated limits.

3. LIMIT SOLAR GAINS IN SUMMER: eg. by controlling the size of

windows to reduce the need for air conditioning.

4. DEMONSTRATE THAT THE QUALITY OF CONSTRUCTION HAS

BEEN ACHIEVED: By adopting Accredited Construction Details which

covers thermal bridging etc and in most cases having an air test

carried out.

5. PROVIDE INFORMATION FOR THE BUILDING USER: Supply

simple operating and maintenance instructions on usage of heating

and water systems.

Example of differences between identical newbuildings, one built in 2002 and one in 2006

Loft Conversion in a Pitched RoofPitch of the roof - required to meet a U-Value of 0.20 W/m2KWhere existing rafters are 150mm deep

• Existing tiles on tile batten on roof felt/membrane over rafters -

check for damage and make good.

• 100mm Celotex XR3000 fixed between rafters using either Celotex

Fixing Clips or 25 x 50mm Treated Batten as stops. Important to

maintain a 50mm ventilation gap above insulation.

• Fix 40mm Celotex GA3000Z underneath to rafters. Overlap joints.

Use Foil Tape to cover face joints.

• Fix 12.5mm Plasterboard through Celotex to rafters.

Alternative to illustration above - Where existing rafters are 100mm deep - batten out rafters to 150mm deep

Or alternatively:

• Use 50mm Celotex Tuff-R GA3000Z between rafters instead of 100mm.

• Use 60mm Celotex Tuff-R GA3000Z fixed underneath raftersinstead of 40mm - overlap joints and tape.

• Fix 25 x 50mm Treated Batten through Celotex to rafters.

• Fix 12.5mm Plasterboard to batten.

Dwarf Wall - required to meet U-Value of 0.30 W/m2K

• Install timber stud using 38 x 89mm fin. CLS Profile or

47 x 100mm Framemate.

• Infill with 75mm Celotex GA3000Z insulation or similar

to achieve required U-Value.

• Finish with 12.5mm Vapour Check Plasterboard.

Flat Ceiling - required to meet a U-Value of 0.16 W/m2K

• Install 47 x 100mm (or size required) Sawn & Treated

Joistmate as ceiling joist.

• Fix 12.5mm Vapour Check Plasterboard to joists.

• Lay 100mm roll insulation in between ceiling joists and 170mm

layered over crossways (dependant on joist size).

Pitched Roof - Cold Roof ConstructionFor extensions, refurbishment or change of use etc, the requirement to meet

Part L1B is a U-value of 0.16 W/m2K. One method of achieving this if the loft

space is not to be habitable is to lay rolled insulation between and over the

joists to a total of 270mm thick.

If 100mm joists - 100mm roll layed between joists,

170mm layed crossways over

All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.

Part ‘L1B’ 2006Examples to meet Part L1B in existing dwellings

05

Build

ing

Regu

latio

ns P

artL

& L1

B 2006

Available from ChampionCode Description

844ØTR 2400 x 1200 x 40mm Celotex Tuff-R GA3000Z



8475TR 2400 x 1200 x 75mm Celotex Tuff-R GA3000Z

841ØØTR 2400 x 1200 x 100mm Celotex XR3000

Other sizes available - see page 08

21396748 Celotex Insulation Clip

2Ø193Ø65 75mm S/A Aluminium Foil Tape

6312SEP 1800 x 900 x 12.5mm S/E Plasterboard

6312DP 1800 x 900 x 12.5mm S/E Vapour Check Plasterboard

(both above also in 2400 x 1200mm)

1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) split 3/400mm Rockwool Roll Batt

15ØTP3 150mm thick 3.2m x 1200mm (3.84m2) split 3/400mm Rockwool Roll Batt

1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre

17ØCGCR8 170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre

255ØSCT 25 x 50mm Sawn Treated Batten

471ØØSC 47 x 100mm Framemate Dry Graded to C16 Softwood Stud

5Ø1ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile Stud

50mm Air Space betweenrafters for ventilation

100mm Celotex XR3000 betweenrafters, fixed using InsulationClips or fix 25 x 50mmTreated Battenas stops to rafters

40mm Celotex Tuff-RGA3000Z fixedunderneath to rafters - overlap joints

Use Foil Tape for facejoints on 40mm Celotex

Fix 12.5mm Plasterboardthrough Celotex to stud

FREEDelivery overa wide area.



FREEDelivery over a wide area.

Fix 12.5mm Plasterboardthrough Celotex to rafters

47mm x 100mmFrameMate as studdingat 600mm centres or38 x 89mm fin. CLS ProfileTimber Stud

Infilled with75mm CelotexTuff-R GA3000Z

Ventilated loft space

Sarking felt

Eaves ventilator to ensure25mm air gap

Minimise cold bridging

Soffit vents

Plasterboard

100mm Roll layedbetween (100mm)ceiling joists, then170mm roll layedover cr0ssways

Code Description

1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt

15ØTP3 150mm thick 3.2m x 1200mm (3.84m2) Split 3/400mm Rockwool Roll Batt


17ØCGCR8 170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre

Treated JoistMate for ceiling joists and rafters

Fixings

Plasterboard

Part ‘L1B’ 2006Examples to meet Part L1B in existing dwellings


Flat Roof on an extension - Warm Roof constructionThe ideal solution here is to fit an all-in-one roofboard such as Kingspan TR31

Thermaroof or Celotex Tempchek TD3000. Both incorporate a 6mm WBP exterior

plywood bonded one side to rigid polyisocyanurate foam, faced with low

emissivity aluminium foil on the reverse as a vapour check liner. This creates a

'Warm Roof' and avoids the difficulty of providing ventilation through the roof

void.

In combination with weathering, joist cavity and 12.5mm Vapour Check

Plasterboard when -

Refurbishing an existing extension flat roof

• 96mm Thermaroof TR31 meets the 0.25 W/m2K U-Value requirement

For flat roofs on a new extension

• 115mm Tempchek TD3115 meets the 0.20 W/m2K U-Valuerequirement

Refurbishment - upgrading an exterior wallExterior walls are required to meet 0.35 W/m2K U-value. This can be achieved

on existing older properties by lining the interior of the exterior wall. Illustration

above right shows an example of upgrading a typical brick/cavity/brick

construction. For other types of exterior wall construction, the thickness and

combination of insulation materials used may vary. For further information,

we have access to technical advise if required.

Refurbishment - upgrading an exterior wallThis combination meets 0.35 W/m2K U-value requirement

New and replacement Windows and DoorsNew and replacement windows and doors are also required to meet Part L and in

particular minimum standards of glazing apply. Champion are main stockists of

Premdor Joinery Products. As an aid to meet the regulations, Premdor’s very

comprehensive catalogue available from Champion, details alongside the relevant

product the U-value achieved.

In summary the regulations state for:

Insulation angle fillet

3 Layer built-up felt roofingutilising 3G felt base layerpartially bonded

3G baselayer

KingspanThermaroof TR31or CelotexTempchekTD3000

12.5mm Vapour CheckPlasterboard

Unventilated cavity(Low emissivity)

Foil vapourcontrol layerto underside

Vapour proof non-setting gungrade mastic sealant appliedcontinuously to upper surface of all joists /noggins correspondingwith board edges to provide continuity of foil vapour control layer

Joistmate


8496CP 2400 x 1200 x 96mm Thermaroof TR31 Roofdeck

84115TR 2400 x 1200 x 115mm Tempchek TD3115 Roofdeck

Treated JoistMate roof joists

Timber Firrings

5ØAR 50mm Tilting Fillet

Joist Hangers

21347764 Buildex RG151 Coated Fixings for 96mm Deckboard

21383045 Buildex RG177 Coated Fixings for 115mm Tempchek

8412DP 2400 x 1200 x 12.5mm Vapour Check Plasterboard

22946782 Non-setting mastic eg Dow Corning 791 Weatherseal Black

Existing exterior wall

102mm Brick

50mm Cavity 13mm Plaster 47mm x 100mm FrameMate Timber Stud or 38mm x 89mm CLS Profile Timber Stud at 600mm centres

40mm Vapour CheckThermal Laminate

100mm Rockwool Rollor 100mm Glassfibre


1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt


844ØVCTL 2400 x 1200 x 40mm Vapour Check Thermal Laminate

471ØØSC 47 x 100mm Framemate Dry Graded to C16 Softwood Stud

501ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile StudFixings

Drywall Screws up to 75mm long

WindowsBoth new and replacement mustmeet a U-value of 2.00 W/m2K whenfully glazed. If glazing is separate,this must be a minimum hard coatLow E double glazing with anemissivity of 0.15 and a 16mm airgap between panes. To be sure of compliance, it is recommended that readyfactory glazed windows are used.

DoorsWooden and PVC-U doors arerequired to meet 2.00 U-value. WhilstAluminium must meet 2.20 U-value.The same applies to minimumstandards of glazing as windowsabove. For replacement situations,wooden doors only need complywhere over 50% of the combined doorand door frame area is glazed.Contact us if assistance is required.

InsulationInsulation Products

07

Insu

latio

n Pr

oduc

ts


ROCKWOOLManufactured from molten volcanic rock, Rockwool is:

• fire resistant• water repellent

• chemically inert

• rot and vermin proof

• lightweight, easy to use and maintenance free

• retains its thickness

• ideal for uses requiringthermal insulation and sound absorption

• all Rockwool products are CE/CPDcompliant as ‘fit for purpose’

ROCKWOOL ROLL

Lightweight insulation mats in a roll. Suitable as insulation for:

• roof spaces in domestic, commercial and industrial buildings

• underfloor

• suspended ceilings, also improving acoustic performance

ROCKWOOL - FLEXI SLABA semi rigid slab with a unique flexible edge, simply squeeze and fit with

ease, a perfect fit every time.

• tight fit - no gaps• excellent thermal and

acoustic properties

• dimensions to suit timberand metal studding

• no sagging or slumping - continuous performance

• ideal for loft conversions, partitioning and party walls

• CE/CPD compliant as ‘fit for purpose’

ROCKWOOL RWA45 SEMI RIGID SLABSLightweight semi-rigid slabs, being denser and more thermally efficient,thickness for thickness than the roll material.

• use for thermal insulation of floors,walls and roofs

• easy to cut with a sharp knife

• size makes it ideal for fitting between rafters(at 600mm centres) on a pitched roof

ROCKWOOL CAVITY WALL BATTSInstalled in the cavity during build up of the wall.

• completely reliable, maintenance free and cost effective

• size designed to correspond to the vertical spacing of the wall tietherefore no additional fixings required

GLASS FIBRE INSULATION ROLLSManufactured from glass fibre bonded with a synthetic resin:

• classed as non-combustible, achieving Class 1 Surface Spread of Flame

• rot and vermin proof

• lightweight, easy to use and maintenance free

• ideal for thermal insulation of roofs, walls and suspended floors

• because of its fire resistance and sound absorption qualities, used for suspended ceilings and lining internal partitioning


Code Trade Pack R Value (m2K/W)

5ØRWFS 1200 x 600 x 50mm thick (pack of 12) = 8.64m2 1.32

1ØØRWFS 1200 x 600 x 100mm thick (pack of 6) = 4.32m2 2.63


1ØØCGLR14 100mm thick, 3 rolls 11.96m x 387mm = 13.89m2 2.27

15ØCGLR9 150mm thick, 3 rolls 8.04m x 387mm = 9.34m2 3.41

17ØCGCR8 170mm thick, 3 rolls 7.03m x 380mm = 8.01m2 3.86

2ØØFG 200mm thick, 3 rolls 5.2m x 386mm = 6.02m2 4.54

Code Trade Pack (perforated for cutting to 400mm) R Value (m2K/W)

1ØØRB 100mm thick, roll 4.8m x 1200mm = 5.76m2 2.27

15ØTP3 150mm thick, roll 3.2m x 1200mm = 3.84m2 3.41


RWA45 50mm thick, 8 slabs 1000 x 600mm = 4.80m2 1.43

RWA451ØØ 100mm thick, 4 slabs 1000 x 600mm = 2.40m2 2.86

Insulation ProductsSee over on pages 8 and 9 for more insulation products…


5ØCWB 50mm thick, 12 Batts 1200 x 455mm = 6.55m2 1.35

65CWB 65mm thick, 10 Batts 1200 x 455mm = 5.46m2 1.75

8ØCWB 80mm thick, 8 Batts 1200 x 455mm = 4.36m2 2.22

Brick outer layer

Rockwool Cavity Wall Batt

100mm concrete block inner leaf

13mm plaster or 12.5mm plasterboard on dabs

http://office.urbanelement.com/championtimber/quote-engine.aspx?categoryid=3185



CELOTEX tuff-R ZERO GA3000Z, Therma-Break and Extra-R XR3000A multi-purpose insulation board made up of rigid polyisocyanurate (PIR)modified polyurethane foam blended with hydrocarbon blowing agentsyielding a board with zero Ozone Depletion Potential. The foam is facedwith reflective foil both sides as a vapour barrier.

• easily cut with a knife or saw

• lightweight adding no load to the structure

• has nearly twice the thermal efficiency compared to normal insulation,therefore space saving

• stable, strong, durable and rot proof

• achieves Class 1 Surface Spread of Flame

• manufacturing process complies with legislation to reduce Global Warming


Applications include:

• loft conversions

• pitched roof in betweenand under rafters

• lining of timber frameand masonry walls

• floor insulation

Celotex and Kingspan thicknesses are nominal.

SELF ADHESIVE ALUMINIUM FOIL TAPEFor covering butt joints on Celotex, Tri-Iso, Superquilt and Framefoil

CELOTEX INSULATION CLIPDesigned for quick installation ofCelotex insulation between timberjoists or rafters. Ensures the insulation is held firmlywithout the need for nails, screws orbattens.

KINGSPAN THERMAPITCH TP10 ZERO OFPRafter level insulation for tiled or slated pitched ‘Warm Roof’ spaces.Made from high performance CFC/HCFC-free rigid urethane foam, faced bothsides with low emissivity composite foil facings

Thermapitch TP10 zero OFP is:

• easily cut with a knife or saw

• lightweight adding no load to thestructure

• highly resistant to the transmissionof water vapour

• stable, strong, durable and rot proof

• achieves Class 1 Surface Spread ofFlame

• manufacturing process complieswith legislationto reduce Global Warming


• ideal for loft conversions

Code Description R Value (m2K/W)

Therma-Break

8412TR 2400 x 1200 x 12mm 0.50

842ØTR 2400 x 1200 x 20mm 0.85

8425TR 2400 x 1200 x 25mm 1.05

843ØTR 2400 x 1200 x 30mm 1.30Tuff-R Zero

8435TR 2400 x 1200 x 35mm 1.50

844ØTR 2400 x 1200 x 40mm 1.70

8445TR 2400 x 1200 x 45mm 1.95

845ØTR 2400 x 1200 x 50mm 2.15

8455TR 2400 x 1200 x 55mm 2.35

846ØTR 2400 x 1200 x 60mm 2.60

8465TR 2400 x 1200 x 65mm 2.80

847ØTR 2400 x 1200 x 70mm 3.00

8475TR 2400 x 1200 x 75mm 3.25

848ØTR 2400 x 1200 x 80mm 3.45

849ØTR 2400 x 1200 x 90mm 3.90XR3000

841ØØTR 2400 x 1200 x 100mm 4.30

8411ØTR 2400 x 1200 x 110mm 4.75

8412ØTR 2400 x 1200 x 120mm 5.20

8413ØTR 2400 x 1200 x 130mm 5.65

8414ØTR 2400 x 1200 x 140mm 6.05

8415ØTR 2400 x 1200 x 150mm 6.50


845ØTP1Ø 2400 x 1200 x 50mm 2.15

846ØTP1Ø 2400 x 1200 x 60mm 2.60

847ØTP1Ø 2400 x 1200 x 70mm 3.00

849ØTP1Ø 2400 x 1200 x 90mm 3.90

841ØØTP1Ø 2400 x 1200 x 100mm 4.30

Code Description

2Ø127848 50mm wide x 45m long

2Ø193Ø65 75mm wide x 45m long

2Ø134693 100mm wide x 45m long

Code Description

21396748 Celotex Insulation Clip






ACTIS TRI-ISO SUPER 10

Tri-Iso Super 10 is a lightweight multi-composite insulation made up of 19 alternating layers of closed cell foam and reflective films, yet it is only30mm thick.

• thermal efficiency equivalent to210mm thick (U-Value 0.19 W/m2K)mineral wall insulation asindependently certified by BM TRADA

• ensures the continuous insulation,weather and air-tightness of roofsand ridges

• minimises thermal bridging aroundroof windows

• no need for a vapour barrier

• space saving element particularly lends itself to loft conversions

• quick to install using a staple gun

• durable and tear resistant yet cuts easily with scissors

• no irritant dust or fibres when cutting and installing

• CE/CPD compliant as 'fit for purpose'

SUPERQUILTA thin multi-layer insulation quilt similar to Tri-Iso. Independent tests show Superquilt provides insulation performance equivalentto 270mm thickness of glass wool, yet its only 25mm thick. Used on roofs.Space saving qualities makes it ideal for loft conversions.

• meets 2006 updated Part L1B UK Building Regulations

• for new build and refurbishment

• fast and easy to install using a staple gun

• lightweight and flexible

• durable and tear resistant yet cuts with scissors

SUPERQUILT UNDER RAFTER APPLICATIONSuperQuilt is fast and simple to install. With great benefits, keeping rafterdepths to a minimum, lightweight and high insulation values.

THINSULEXAcross-rafter multi-foil insulation for new build, extensions, conversion andrefurbishment work, etc.

EXPANDED POLYSTYRENE STANDARD GRADE (EPS70)A traditional, cheap and easy to use form of insulation with manyapplications such as:

• thermal insulation for floors, internal walls, pitched roofstank linings etc., also packing materials

• retains its thermal characteristics indefinitely

• manufactured using environmentally friendly methods - HCFC free

• BBA Certified


09

Insu

latio

n Pr

oduc

ts



3ØTIS1Ø1Ø 30mm thick, 1.60m x 6.25m = 10m2 roll 5.25


25SQ1Ø 25mm thick, 1.5m x 10m = 15m2 roll 6.1

Acoustic Insulation Products -See pages 11 - 14

Code Description

30T10 30mm thick 10m x 1.2m Roll (12m2) Thinsulex

Insulation


25POLY 2400 x 1200 x 25mm 0.66

4ØPOLY 2400 x 1200 x 40mm 1.05

5ØPOLY 2400 x 1200 x 50mm 1.31

75POLY 2400 x 1200 x 75mm 1.97

1ØØPOLY 2400 x 1200 x 100mm 2.62

Require HIAB delivery to site?

- ring our New Malden Sales Team on 020 8949 1621





KINGSPAN THERMAROOF TR31 (or equivalent) FOR ROOFINGA complete flat roof deck with insulation and built in vapour check laidover joists to create a 'Warm Roof' construction. Thermaroof comprises polyurethane foam, bonded on 1 face with W.B.P 6.5mm plywood. The other face is bonded with aluminium foil vapourcheck liner, which has a class 1 Surface Spread of Flame Rating(B.S. 476: Pt 7: 1971). Bed joints in non-setting mastic such as Dow Corning 791, to form a vapour barrier.

• lightweight, easy to handle

• the 'all-in-one' roof board that will take 3 layer felt orone layer weatherings

• foam is resistant to mould, microbial growth and vermin

For flat roofs, in combination with weathering, joist cavity and 12.5mm

vapourcheck plasterboard:

• 76mm Thermaroof meets the 0.35 W/m2K U-value requirementfor pre April 2002 Building Regulations

• 96mm Thermaroof meets the 0.25 W/m2K U-value requirementfor April 2002 regulations and updated Part L1B April 2006 - refurbishment of existing extensions.

THREE LAYER FELT APPLICATIONPerforated first layer is laid loose, second layer is then heat-laid on top,

spot bonding the bottom layer. Top layer is also heat-laid using hot Bitumen.

CELOTEX TEMPCHEK TD3115 - FOR FLAT ROOFSA combined roof deck an insulation board for flat roofs supported by timberjoists such as JoistMate.

Creates a warm roof construction eliminating the need to insulate between thejoists. Board comprises of 6mm WBP exterior plywood bonded one side to rigidpolyisocyanurate foam, faced with low emissivity aluminium foil on the reverseas a vapour check liner.

• lightweight - easy to handle• quick to lay• plywood face suitable for a wide variety of weathering systems• avoids the difficulty of providing ventilation through

the roof void• CE/CPD compliant as ‘fit for purpose’

For flat roofs, in combination with weathering, 115mm Tempchek, 150mmjoist cavity and 12.5mm Vapour Check Plasterboard, achieves a U-value of0.19 W/m2K, meeting the 0.20 W/m2K requirement for new flat roof extensionsset down in Part L1B of the 2006 Building Regulations.

FIXINGS FOR THERMAROOF & TEMPCHEKCode Description

21345562 Buildex RG126 Coated Fixing for 76mm Thermaroof

21347764 Buildex RG151 Coated Fixing for 96mm Thermaroof

21383045 Buildex RG177 Coated Fixing for 115mm Tempchek


84115TR 2400 x 1200 x 115mm 4.788

Code Description

847ØCP 2400 x 1200 x 76mm

8496CP 2400 x 1200 x 96mm

Joistmate

Top layer is also heat-laidusing hot bitumen

12.5mm Vapour Check Plasterboardor other ceiling covering Firring Piece

THERMAROOF laid withply facing upFREE

Delivery overa wide area.





Part ‘E’ Building RegulationsResistance to the Passage of Sound

11

Part

‘E’

Build

ing

Regu

latio

ns


To combat the problem of noise pollution in buildings, Approved DocumentPart 'E' of the Building Regulations sets out to introduce more robust buildingstandards to improve soundproofing in both new build and refurbishmentprojects by

• improving acoustics and therefore sound privacy between dwellings

• improve the sound reduction of internal walls and floors in a home

• improve the sound reduction between rooms and in common areas eg. residential homes, hotels etc.

• to take into consideration low frequency sounds eg TV's, stereos etc. considered to be the main offender in noise pollution complaints

There are two types of sound considered

• Airborne Sound, relates to sound made by speech, TV's, stereos etc. The measurement term used for on-site testing is DnTw or Rw if laboratory tested and is measured in Decibels (dB). The higher the figure, the better the insulation

• Impact Sound, relates to sounds such as footsteps or heavy objects impacting on the floor. The measurement terms used here is LnTw for on-site testing and Lnw for laboratory. This is also measured in Decibels. However, the lower the figure the better the insulation against impact noise

CTR ADJUSTING FACTORIn addition on some building elements, Part E requires a correction factor to beadded to the Airborne Sound value, designed to take into account low frequencynoises such as from TV's stereos etc. The Ctr factor is set by Building Controland will vary according to the type of building.

PRE-COMPLETION TESTING (PCT)Building structures are now subject to Pre-Completion Testing. The onus is onthe builder to demonstrate the required levels of sound insulation have beenachieved. Testing is done under the jurisdiction of the local Building Controldepartment and is a cost to the builder.

If a failure occurs then the construction has to be improved, then re-tested,again at the builders cost.

To ensure the building does not fail, particularly with refurbishment orupgrading of an existing building where every building can be unique,attendance to good design, good quality workmanship and attention to detail is critical.

There are exceptions where PCT is not required, amongst these are

• where a building conforms to Robust Standard Detail (RSD)document (see further on for more detail)

• internal walls/partitioning within a dwelling ie. a wall between abedroom or room containing a W.C. or/and other rooms

ROBUST STANDARD DETAIL (RSD) DOCUMENTThe House Builders Federation has set up a programme of testing buildingmethods and materials used for walls and floors in new build construction, to meet and exceed the sound requirements of the regulations. As a consequence these methods etc. have subsequently been approved by Building Control and are known as Robust Standard Detail (RSD) constructions.New build structures that are built to comply with RSD's standards, negate theneed for Pre-Completion Testing.

Building Element Airborne Sound Transmission Impact Sound Transmission (minimum values) (maximum values)

Internal Wall or Partition (Pre-completion testing not required)

40 Rw dB

Wall separating one dwelling from another (Pre-completion testing required)

New Build 45 DnTw + Ctr dB

Material change of use / refurbishment 43 DnTw + Ctr dB

Separating timber floor (Pre-completion testing required)

New Build 45 DnTw + Ctr dB 62 LnTw dB

Material change of use / refurbishment 43 DnTw + Ctr dB 64 LnTw dB

TABLE OUTLINING THE REQUIREMENTS TO MEET PART 'E'(correct at time of going to press, please check with Building Control for current)

ROCKWOOL FLEXI SLABA semi-rigid slab with a unique flexible edge, simply squeeze and fit with

ease, a perfect fit every time

• tight fit - no gaps

• excellent thermal and acoustic properties

• dimensions to suit timber and metal studding

• no sagging or slumping - continuous performance

• ideal for loft conversions, partitioning and party walls

• CE/CPD compliant as 'fit for purpose'

TIMBER STUD WALL FORMED BY MATERIALCHANGE OF USE• 47 x 75mm FrameMate Stud at

600mm centres

• 50mm Flexi-Slab installed betweenstuds

• fix 12.5mm Soundshield Plasterboardboth sides of stud

Achieves sound reduction of Rw 40dB -Part ‘E’ minimum requirementDouble layer of 12.5mm SoundshieldPlasterboard achieves Rw 46dB

Code Description ‘R’ value (m2K/W)

50RWFS 1200 x 600 x 50mm thick (pack of 12) = 8.64m2 1.32

100RWFS 1200 x 600 x 100mm thick (pack of 6) = 4.32m2 2.63

Acoustic Insulation Products

For Soundshield Plasterboard see page 16


As the Correction Factor (Ctr) to meet Part E will vary dependant on the typeof building, this will require different solutions re materials and buildingmethods. To show all of these variations is beyond the scope of thisbrochure and therefore we recommend manufacturers literature (available onrequest) or their technical departments are consulted.

REDUC ACOUSTIC FLOOR INSULATIONA range of floor insulation products designed to meet the needs of Building Regulations 'Part E'

All Reduc products are CPD compliant as 'fit for purpose'

REDUC MICRO 17A thin acoustic overlay panel, ideal for first level floors and above.Substrate layers of moisture resistant fibreboard and MDF top are separatedby visco-elastic sound dampening strips, whilst the underside incorporates aresilient layer of acoustic felt, which provides mechanical isolation from theexisting floor.

• dampens vibration and reduces airborne sound and impact noise

• easy to install either on top of existing wood or chipboard flooringor even concrete floors. Micro 17 is not load bearing

• only 17mm thick therefore minimal height loss

• moisture resistant MDF face takes most floor coverings

On existing timber floors where requirement is to satisfy Building RegulationPart 'E' as part of an overall upgrade, install SoundSlab insulation between thetimber joists. When installed as illustration below achieves Aiborne Sound of43dB (DnTw+Ctr) and Impact Sound 58dB (LnTw).

REDUC STRATA 35Strata is a high performance acoustic overlay (not structural) flooring for newand existing timber and concrete floors.

Top layers of moisture resistant fibreboard and MDF are separated by visco-elastic sound dampening strips, whilst the underside incorporates a resilientlayer of acoustic felt, which provides mechanical isolation from the existingfloor. This produces a board with an overall thickness of 35mm.


• easy to install either on top of existing wood or chipboard flooring or even concrete floors

• top surface takes most standard floor coverings

On existing timber floors where requirement is to satisfy Building RegulationPart 'E' as part of an overall upgrade, install SoundSlab insulation between thetimber joists. When installed as illustration above right achieves Aiborne Soundof 45dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).

REDUC STRATA 35 EXTRAAn even higher performance version of Reduc Strata and as such does notalways require the installation of SoundSlab between joists on timber floorsto meet Part 'E'.

Structure and thickness of board is the same except dense cement particleboard is used instead of chipboard. When installed as illustration belowachieves Aiborne Sound of 48dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).

REDUC FOUNDATION 35A high performance structural or overlay acoustic flooring for use on new andexisting timber and concrete floors.

The 35mm thick board comprises of two layers of moisture resistant chipboard,separated by visco-elastic sound dampening strips, then an acoustic felt on theunderside.


• installed on top of timber joists (maximum 450mm centres) as a structural floor, or can be used as an overlay

• moisture resistant chipboard surface takes most standard floorcoverings

When installed as illustration below achieves Aiborne Sound of 47dB(DnTw+Ctr) and Impact Sound 57dB (LnTw).

Acoustic InsulationAcoustic Insulation Products


SoundBreaker Bars

2 Layers Plasterboard


Reduc Isolation Tape

Reduc Acoustic Sealant

Reduc Micro 17

18mm Chipboard

SoundSlab

SoundBreaker Bars

SoundBreaker Bars




Reduc Strata

18mm Chipboard

SoundSlab

SoundBreaker Bars




Reduc Strata Extra

18mm Chipboard

SoundSlab

SoundBreaker Bars




Reduc Foundation 35 or 39

SoundSlab

Insulation ProductsSee over on pages 14 and 15 for moreacoustic insulation products…

Deck 18


13

Acou

stic

Insu

latio

n Pr

oduc

ts


Code Description

4217RM 1175 x 575 x 17mm Micro 17, (pack of 4)

4235RS 1175 x 575 x 35mm Strata 35, sold loose

4235RSE 1175 x 575 x 35mm Strata 35 Extra, sold loose

8135RF 2400 x 600 x 35mm Foundation 35, sold looseReduc Accessories

21329166 1200 x 600 x 100mm SoundSlab, (pack of 6) = 4.32m2

21383182 1200 x 600 x 75mm SoundSlab (pack of 8) = 5.76m2

21397042 1200 x 600 x 50mm SoundSlab (pack of 12) = 8.64m2

21356162 19 x 5mm Micro 17 Isolation Tape, 15m roll

21396274 37 x 5mm Strata Isolation Tape, 15m roll

21353031 37 x 5mm Strata Extra Isolation Tape, 15m roll

21385957 37 x 5mm Foundation Isolation Tape, 15m roll

21345487 Reduc Joint Adhesive, 1 litre bottle

21353444 1200mm wide Reduc Wire Mesh, 50m roll

21353970 Reduc Flexiseal 380ml Tube

Tri-Deck

Acoustic Strip

Ask for a Monarfloor leaflet

MONARFLOOR ACOUSTIC FLOOR INSULATIONA range of acoustic floor insulation products to meet the airborne and impactsound requirements of Building Regulations Approved Document Part 'E'.

Monarfloor uses LRAC reconstituted foam bonded to various sub-stratesdepending on the requirement. This foam is stable and has a lower natural frequency than other foams for reducing sound. CE/CPD compliant as 'Fit for purpose'

Versions available

MONARFLOOR DECK 9Designed to reduce sound transmission through concrete or existing timberfloors in situations where a minimum increase in finished floor height isrequired.

Consists of 8mm LRAC foam bonded to 9mm MR MDF. Overall thickness 17mm.

• Airborne Sound Reduction (DnTw+Ctr) - 48dB• Impact Sound Reduction (LnTw) - 48dB

MONARFLOOR DECK 18

Designed to reduce sound transmissionthrough existing timber floors in situations where an increase in finishedfloor height is not critical.

Consists of 8mm LRAC foam bonded to18mm P5 V313 MR Chipboard. Overallthickness 26mm.

When installed as part of a soundreduction system as right, achieves:• Airborne Sound (DnTw+Ctr) - 49dB • Impact Sound (LnTw) - 49dB

MONARFLOOR DECK 22

A thicker version of Deck 18 using 22mm thick P5 V313 MR Chipboardinstead of 18mm For heavy domestic applications.

When installed as Deck 18 above achieves:• Airborne Sound Reduction (DnTw+Ctr) - 50dB• Impact Sound Reduction (LnTw) - 50dB

MONARFLOOR TRI-DECK Designed to reduce sound transmission through existing applications. Installed as a sub-floor directly onto floor joists.Consists of 5mm foam rubber bonded to 8mmLRC foam bonded to 22mm P5 V313 MR Chipboard. Overallthickness 35mm.

When installed as part of a soundreduction system as right, achieves• Airborne Sound (DnTw+Ctr) - 46dB• Impact Sound (LnTw) - 56dB

MONARFLOOR ACOUSTIC STRIP Designed to reduce sound transmission through timber floors in new andrefurbishment projects. Fitted onto the top of the floor joist, then 22mmP5 V313 MR Chipboard Flooring glue fixed over.

Consists of 15mm LRAC foam bonded to asecuring membrane, reinforced with aplywood backing. Overall thickness21mm.

When installed as part of a soundreduction system as right, achieves• Airborne Sound (DnTw+Ctr) - 48dB• Impact Sound (LnTw) - 48dB

MONARFLOOR IMPACT MAT Used underneath carpet etc on concrete floors to reduce impact sound

Consists of a 6.5mm thick resilient rubber crumb with a syntheticreinforced top surface. Achieves 29dB (Lw).

Code Description

4217MFAD 1200 x 600 x 17mm Monarfloor Acoustic Deck 9

8226MFAD 2400 x 600 x 26mm Monarfloor Acoustic Deck 18

823ØMFAD 2400 x 600 x 30mm Monarfloor Acoustic Deck 22

21338649 2400 x 600 x 35mm Monarfloor Tri-Deck

MFAS45 2400 x 21 x 45mm Monarfloor 45 Acoustic Strip

MFAS75 2400 x 21 x 75mm Monarfloor 75 Acoustic Strip

MFIM11 11m x 1.37m x 6.5mm Roll Monarfloor Impact Mat

MONARFLOOR ACCESSORIES

MFFB1Ø 150 x 6mm x 2m Pack Monarfloor Flanking Band

MFFB75 75 x 6mm x 2m Pack Monarfloor Flanking Band

MFA5 Monarfloor Adhesive – 5ltr

MFA1 Monarfloor Adhesive – 1ltr

Ask for a Monarfloor leaflet

ACOUSTILAY ACOUSTIC FLOOR INSULATIONInstalled like a conventional underlay it provides an easy and convenientmethod of upgrading existing floors in building conversions required to meetthe airborne and impact sound requirements of Building Regulation ApprovedDocument Part 'E'.

Acoustilay is constructed with a resilient foam core bonded either one or bothsides dependant on type, with a flexible attenuating surface layer.There are three versions:

Acoustilay 15 - used where both airborne and impact noise insulation isrequired. Flexible layer two sides. Overall 15mm thick.Acoustilay 8 - impact noise insulation similar to Acoustilay 15, but airbornenoise reduction will depend on the existing floor structure. Flexible layer oneside. Overall 12mm thick.Acoustilay 3 - used where only impact insulation is required. Flexible layer oneside. Overall 10mm thick.

• improves airborne sound insulation• reduces impact noise• flexible, easily cut and shaped• offers economy of quick and easy installation, simply laid

under the carpet• minimum increase in floor level• tested to BS2750• flame retardant, surface layer self extinguishing• CE/CPD compliant as 'fit for purpose'

Code Description

4415AU 1200 x 1200 x 15mm Acoustilay 15



ACOUSTILAY ACCESSORIESPerimeter Strips - used with carpet gripper and installed around the perimeter

nailed to the floor.

Foam Perimeter Sealer - for sealing the gap between a timber/laminate flooring

overlay. Self adhesive, 3mm thick expanding over 24 hours up to a 15mm gap.

Release Tackifier Adhesive - permanently tacky acrylic adhesive for laying

Acoustilay to sub-floor and carpet tiles.

Acrylic Adhesive - high tack, good grab, permanent bond. For bonding carpet

and timber to Acoustilay.

Acoustilay MDF - special T & G V313 Moisture Resistant MDF used as an

interlayer minimising joint movement, carpet rucking etc.

Code Description

12ØØAPS15 25 x 9mm thick Acoustilay 15 Perimeter Strip, 1.2m long

12ØØAPS8 25 x 6mm thick Acoustilay 8 Perimeter Strip, 1.2m long

21351549 15 x 3 to 15mm thick Foam Perimeter Sealer, 8m roll

21357Ø84 Release Tackifier Adhesive, 10ltr

213654Ø9 Acrylic Adhesive, 5ltr

446AUMR 1200 x 1200 x 6mm Acoustilay TG4 MR MDF Acoustic Underlay

ATTENU8 ACOUSTIC UNDERLAY - FOR REFURBISHMENTThis underlay is designed to improve the airborne and impact sound

insulation of an existing wood or concrete floor and can be laid under carpet

or laminate flooring etc.

The high-density sound barrier assists in blocking airborne noise, whilst the

foam resilient layer assists in absorbing impact noise. Attenu8 underlay is

hardwearing and gives excellent under foot touch. The increase in floor height

is minimal, particularly when substituting for the underlay under an existing

carpet.

Code Description

44A8U15 1200 x 1200 x 13mm Attenu8 Underlay

21371134 75 x 5mm 15m S/A Flanking Strip

Other Attenu8 Acoustic Flooring products for new build as part ofa flooring system

Code Description

82A8Ø 2400 x 600 x 26mm Attenu8 Overlay - for concrete floors

5Ø75B7Ø 45 x 70mm fin. 1.8m Attenu8 Timber Batten - for wood

and concrete floors

Airborne Sound Insulation of Timber Floors

The Building Regulations require a figure forDnTw + Ctr of 43dB or higher for airborne noisebetween dwellings within a converted property.The higher the figure the better the insulation.

Impact Sound Insulation of Timber Floors

The Building Regulations require a figure for LnTw

of 64dB or lower for impact noise between dwellingswithin a converted property. The lower the figurethe better the insulation against impact noise.



The Perimeter Strip nailed to the floor, with thefoam edge seal compressed to the skirting andgripper nailed on top.

Plywood, MDF or timber laid onto Acoustilay withPerimeter Sealer or flexible mastic to the edge.

DnTw DnTW+ctr

Acoustilay 15 55dB 48dB

Acoustilay 8 50dB 43dB

LnTW

Acoustilay 15 37dB

Acoustilay 8 39dB

Acoustilay 3 39dB

Carpet or laminated flooring etc.Existing timber floor, lifted to put in theRockwool, re laid and all gaps caulked Attenu8 Underlay

(No guarantees can be given to the acoustic performance of this system as every existing situation varies)

15

Fire

Rat

ed,W

ater

& F

ire R

esis

tant


Sheet MaterialFire Rated, Water & Fire Resistant

Fire Rated Sheet MaterialPYROK 5 STAR, VIROC (Class ‘O’) OR SIMILARA cement bonded particle board.

• suitable for internal and external use• asbestos free, no hazardous volatiles, non-aggressive dust• cut, plane, drill, router or screw into it

Code Description

846PROC 2440 x 1220 x 6mm

426TB 1218 x 618 x 6mm moisture resistant

MASTERBOARDConsists of a high calcium silicate matrix reinforced with cellulose, which isthen high pressure steam cured.

• high dimensional and chemical stability, with low alkalinity• rated as Class ‘0’ and Class ‘1’ Surface Spread of Flame• provides up to 30 min. of fire protection• immune to insect and vermin attack• smooth 1 face, lightly textured reverse• asbestos free

Code Description

846MB 2440 x 1220 x 6mm

849MB 2440 x 1220 x 9mm

8412MB 2440 x 1220 x 12mm

SUPALUXA high performance building board made from calcium silicate reinforcedwith selected fibres and fillers.

• rigid, strong yet lightweight• non-combustible, providing up to 4 hours fire protection• moisture tolerant, will not rot or decay• smooth face can be decorated• easy to handle and work• asbestos free

Code Description

846SL 2440 x 1220 x 6mm

849SL 2440 x 1220 x 9mm

8412SL 2440 x 1220 x 12mm

MDF FR EURO CLASS C (Formerly Class 1)

Code Description

846MDFFR1 2440 x 1220 x 6mm

849MDFFR1 2440 x 1220 x 9mm

8412MDFFR1 2440 x 1220 x 12mm

8418MDFFR1 2440 x 1220 x 18mm

MDF FR EURO CLASS B (Formerly Class O)

Code Description

8412MDFFRO 2440 x 1220 x 12mm

8418MDFFRO 2440 x 1220 x 18mm

WBP HARDWOOD PLYWOOD FR EURO CLASS C (Formerly Class 1)

Code Description

844FEPFR1 2440 x 1220 x 4mm

846FEPFR1 2440 x 1220 x 6mm

849FEPFR1 2440 x 1220 x 9mm

8412FEPFR1 2440 x 1220 x 12mm

8418FEPFR1 2440 x 1220 x 18mm

WBP HARDWOOD PLYWOOD FR EURO CLASS B (Formerly Class O)

Code Description

8412FEPFRO 2440 x 1220 x 12mm

8418FEPFRO 2440 x 1220 x 18mm

Water and Fire ResistantSheet MaterialHARDIBACKERMade from Portland cement and ground sand with cellulose additives, thisboard is particularly resistant to water and as such is used in bathrooms,kitchens and utility rooms. Ideal as a backing board for tiling etc. Generally Hardibacker 250 is used forfloor and worktop applications, whilst Hardibacker 500 is used for walls,although the latter can also be used for floors and worktops.

• highly recommended where high levels of moisture exist• non-combustible, conforms to Class ‘O’ Surface Spread of Flame• vermin and rot proof• strong and durable, yet light and easy to work with (wear mask)• bonding coat on surface assists tiling• meets ISO 8226• British Board of Agreement (BBA) approved• 10 year product warranty• asbestos and formaldehyde free• suitable for internal and external use

Code Description

536HB 1500 x 900 x 6mm Hardibacker 250

4312HB 1200 x 800 x 12mm Hardibacker 500

2346Ø973 Alkaline Resistant Joint Tape - 20m roll

Superior Water andMould ResistanceProprietary cement formula withMoldblock™ Protection providessuperior mould resistance.




Sheet MaterialPlasterboard & Accessories

PLASTERBOARDA wallboard consisting of aerated gypsum encased in a strong durable paperliner.

• used for partitioning, internal wall and ceiling linings• Ivory face suitable for both plastering and direct decoration• because of its unique behaviour when subject to high temperatures,

classified Class ‘O’ Spread of Flame in England and Wales• all Plasterboard products are CE/CPD compliant as ‘fit for purpose’

SQUARE EDGE

TAPERED EDGETapered edge version, used when ‘Dry Lining’ a wall or partition. Once thecorrect joint treatment has been completed , provides a flat seamless surface,without the need for plastering.

FOIL BACKED VAPOUR CHECKA tough, scuff resistant metallised polyester film on one face of theplasterboard provides the dual features of vapour check and reflectivethermal insulation.

Available in square or tapered edge. Used to line ceilings, external walls and loftconversions etc.

PLASTERBOARD PLANKA thicker version of the standard plasterboard, used for its sounddeadening qualities.

SOUNDSHIELD PLASTERBOARDThe high density of this board helps absorb sound energy

• designed for use where sound reduction is particularly important• classified as Class ‘0’ Surface Spread of Flame• complies with BS1230 Part 1, designated as Type 1• CE/CPD compliant as ‘fit for purpose’

PLASTERBOARD ACCESSORIES

THERMAL LAMINATE AND VAPOUR CHECKConsists of 12.5mm plasterboard backed with a thick layer of extrudedpolystyrene, to form a versatile board with high thermal insulation value.

The vapour check version has the added bonus of a water resistant membraneincorporated between the polystyrene and the plasterboard. Cream face is fordecorating or plastering.

• ideal for lining the inside of external walls, particularly when upgrading walls with low insulation value

• Vapour Check version important where there is a risk of damp

Code Description ‘R’ Value

(m2K/W)

8422TLPB 2400 x 1200 x 22mm Tapered Edge 0.39

843ØTLPB 2400 x 1200 x 30mm Tapered Edge 0.60

843ØVCTL 2400 x 1200 x 30mm Tapered Edge Vapour Check 0.60

844ØVCTL 2400 x 1200 x 40mm Tapered Edge Vapour Check 0.86

THERMAL LAMINATE PLUSAs Thermal Laminate but 12.5mm plasterboard bonded to CFC-free extruded

polystyrene producing a board with lower thermal conductivity.

• allows thinner thicknesses to be used compared to standard

• extruded polystyrene provides natural vapour barrier

Code Description Weighted Density ‘R’ value(Kg/m2) (m2K/W)

639SEP 1800 x 900 x 9.5mm 6.20 0.06

6312SEP 1800 x 900 x 12.5mm 8.30 0.08

849SEP 2400 x 1200 x 9.5mm 6.20 0.06

8412SEP 2400 x 1200 x 12.5mm 8.30 0.08

8415SEP 2400 x 1200 x 15mm 10.20 0.09

Other sizes available to order.

Code Description Weighted Density ‘R’ value

(Kg/m2) (m2K/W)

639DP 1800 x 900 x 9.5mm Square Edge 6.20 0.06

6312DP 1800 x 900 x 12.5mm Square Edge 8.30 0.07

8412DP 2400 x 1200 x 12.5mm Tapered Edge 8.30 0.07



(Kg/m2) (m2K/W)

8219TEP 2400 x 600 x 19mm Tapered Edge 13.49 0.12


(Kg/m2) (m2K/W)8413SSPB 2400 x 1200 x 12.5mm Square Edge 11.50 0.05

8415SSPB 2400 x 1200 x 15mm Square Edge 13.80 0.06

Code Description5Ø12RIS 50 x 12 x 5mm Resilient Isolation Strip Roll

2525STA 25 x 25 x 3.6mm Speedline Steel Angle SL06

3ØSRB 3m Speedline Resilient Bar RB565


(Kg/m2) (m2K/W)

8412TEP 2400 x 1200 x 12.5 mm 8.30 0.08


IMPORTANT - The ivory face of Plasterboardis suitable for direct decoration or plastering.


(m2K/W)

8427TLPPB 2400 x 1200 x 27mm Tapered Edge 0.71


844ØTLPPB 2400 x 1200 x 40mm Tapered Edge 1.19

45THBP 2400 x 1200 x 45mm Tapered Edge 1.37



17

Plas

terb

oard

& A

cces

sorie

s


PHENOLIC LAMINATE WITH VAPOUR CHECKUses CFC and HCFC-free phenolic foam bonded to 12.5mm plasterboard

incorporating a vapour check.

MOISTURE RESISTANT BOARD (MOISTURE SHIELD)Suitable for applications where temporary exposure to moisture may occur.

• suitable for use in bathrooms, kitchens, garages etc• can be used as a baseboard for ceramic tiling

Knauf recommends that Knauf Moistureshield boards should be sealed prior toplastering. (See manufacturers recommendation before plastering).

FIRECHECK BOARD (FIRESHIELD)Offers a greater fire protection than standard Wallboard.

• meets BS1230 Part 1, Type 5


(Kg/m2) (m2K/W)

8412FCP 2400 x 1200 x 12.5mm Square Edge 9.00 0.05

8415FCP 2400 x 1200 x 15mm Square Edge 10.7 0.06

Other sizes, tapered edge and vapour check versions also available.Prices on application. Other technical details also on application.

JOINT CEMENTThe ideal quick drying filler for square edge or tapered edge boards. Can also beused to fill nail or screw holes and any other indents.

Code Description

JC12 Readymix 12 Litre Tub

DRYWALL SCREWSPlated self-tapping screws for fixing plasterboard to either timber or metal stud.Boxed screws code

1000's 2000's Size

23778948 23729582 3.5 x 25mm

23727557 23764378 3.5 x 32mm

23776173 23745797 3.5 x 38mm

23724785 23737822 3.5 x 42mm

23722Ø19 n/a 3.5 x 45mm

2377Ø621 23769915 3.5 x 50mm

500's 200's

23792852 n/a 3.5 x 55mm

2374Ø792 23721302 3.5 x 60mm

23765Ø85 23725140 4.2 x 65mm

n/a 23784457 4.2 x 75mm

COVEA gypsum core encased in a durable paper liner. Used as a cornice for theangle between walls and ceilings. The face is ready for direct decoration.Accurate 90˚ mitres can be cut using templates for internal or external corners.

Code Description

100C 90mm x 3m

127C 127mm x 3m

COVE ADHESIVEFor fixing cove and as a filler for gaps between cove and wall or ceiling, mitres,nail holes etc. One bag is normally sufficient to fix 9 lengths of 90mm or 5lengths of 127mm cove

Code Description

CA 5kg bags

BONDING COMPOUNDAn economical adhesive for fixing metal furring channel when bondingplasterboard together to form laminated partition. Also suitable for all ThermalBoard.

Code Description

BC 25kg bags

Approx. requirement per 100M2 M/F channel 140-190Kg

FIBRE JOINTING TAPE (SELF ADHESIVE)

Covers over joints between boards and when used with jointing compound,

dramatically reducing cracking at joints. Can also be used for internal corners.

Code Description

FT Self adhesive 50mm x 90m Roll

PLASTER/PLASTERBOARD BEADS

Code Description

22Ø42941 MMB Plaster Mini-Mesh Bead - 2.4m long

22094339 PAB 24 Plaster Angle Bead - 2.4m long

22045713 PCB 24 Plasterboard Thin Coat Bead - 2.4m long


(m2K/W)

845ØPLPB 2400 x 1200 x 50mm Tapered Edge 1.82

846ØPLPB 2400 x 1200 x 60mm Tapered Edge 2.36

8465PLPB 2400 x 1200 x 65mm Tapered Edge 2.58



(Kg/m2) (m2K/W)

8412MRTEP 2400 x 1200 x 12.5mm Tapered Edge 10.00 0.05

Sheet MaterialPlasterboard & Accessories


ChipboardSTANDARD GRADE TYPE P2

Minimum 600 density interior use only.• sizes marked 'CE' are CE/CPD compliant as 'fit for purpose'

Code Description

8412C 2440 x 1220 x 12mm 'CE'

8418C 2440 x 1220 x 18mm 'CE'

8425C 2440 x 1220 x 25mm 'CE'

843ØC 2440 x 1220 x 30mm

1Ø418C 3050 x 1220 x 18mm

1Ø425C 3050 x 1220 x 25mm

FLOORING GRADE T&G TYPE P5MOISTURE RESISTANT (V313)

Tongued and grooved all four edges. Minimum 700 .

Moisture resistant for use in areas of high humidity

and where risk of moisture. Not for external use.

• ideal for kitchens, bathrooms and

extensions

• CE/CPD compliant as

'fit for purpose'

• FSC min 50%

Code Description

8218MRTGC 2400 x 600 x 18mm

8222MRTGC 2400 x 600 x 22mm

Oriented Strand Board(OSB)CONDITIONED GRADE OSB3A general purpose board suitable for exterior use composed of timberwafers/strands of variable species and bonded under pressure withwaterproof resin.

Made up in 3 layers, cross oriented to give maximum strength.

• approved by the British Board of Agreement (BBA)

• specified for flat roofs,

flooring and wall sheathing

• felt manufacturer's guarantee

dependent on being BBA

approved

• cheaper alternative to Ply

• CE/CPD compliant as

'fit for purpose'

• FSC min 70%

Code Description

84110SB 2440 x 1220 x 11mm

84180SB 2440 x 1220 x 18mm

BlockboardFAR EASTERN/BRAZILIAN 5 PLY5 Ply long grain, interior use, face veneers are always hardwood.

• face veneers can be stained, painted or varnished

Code Description

8418RB 2440 x 1220 x 18mm

Door BlanksGeneral construction is of a thick solid timber core with a face veneer flusheither side. Veneer is generally suitable for painting. Door blanks forinternal use only are generally chipboard core.

• ‘Lite’ door blanks are about 20% lighter than standard• Decorative Veneer versions also available• Blanks can be trimmed to size and glazing apertures added

(glazing aperture will have size limitations if used as a fire door)• Used where an oversized door is required, or to fit a non-standard

openingWhere used as a fire resistant door, generally

• 45mm thick blanks achieve 30 minute fire rating• 54mm thick blanks achieve 60 minute fire rating

To meet fire rating, whether used full size or trimmed to fit, blanks are requiredto be lipped both long edges and on 60 minute, short edges as well.Intumescent Strip/Smoke Seal is also required, either fitted underneath or onthe lipping, or to the door frame itself.

‘LITE’ INTERNAL/EXTERNAL (30min)Code Description

26FUNSL 1981 x 762 x 45mm

29FUNSL 2058 x 838 x 45mm

3ØFUNSL 2135 x 915 x 45mm

4ØFUXL 2440 x 1220 x 45mm ‘Superlite’

VENEERED INTERNAL (30min)Code Description3ØFUNS 2135 x 915 x 45mm Sapele

3ØFUNA 2135 x 915 x 45mm Ash

3ØFUNOQ 2135 x 915 x 45mm Quarter Cut Oak

INTERNAL/EXTERNAL (60min)Code Description3ØFUXD 2135 x 915 x 54mm

Sheet MaterialChipboard, OSB, Blockboard & Blanks



PlywoodWBP HARDWOOD PLYWOODLong grain, hardwood veneers throughout.

• for interior or exterior use • WBP gluing highly resistant to weather, micro-organisms

and wet and dry heat• hard wearing and very durable

Code Description

844WBPP 2440 x 1220 x 3.6mm

846WBPP 2440 x 1220 x 5.5mm

849WBPP 2440 x 1220 x 9mm

8412WBPP 2440 x 1220 x 12mm

8415WBPP 2440 x 1220 x 15mm

8418WBPP 2440 x 1220 x 18mm

8425WBPP 2440 x 1220 x 25mm

1Ø54WBPP 3050 x 1525 x 3.6/4mm

1Ø56WBPP 3050 x 1525 x 5.5/6mm

1Ø59WBPP 3050 x 1525 x 9mm

1Ø512WBPP 3050 x 1525 x 12mm

1Ø518WBPP 3050 x 1525 x 18mm

1Ø525WBPP 3050 x 1525 x 25mm

BIRCH WBP Although WBP gluing, Birch ply is made up of veneers which are officially

classified as perishable. Not recommended for any exposed exterior

application unless pressure preservative impregnated.

Russian/Latvian

Code Description

55BP 1525 x 1525 x 1.5mm

844BP 1220 x 2440 x 4mm

846BP 1220 x 2440 x 6mm

849BP 1220 x 2440 x 9mm

8412BP 1220 x 2440 x 12mm

8418BP 1220 x 2440 x 18mm

8424BP 1220 x 2440 x 24mm

FLEXIBLE PLYWOOD - MOISTURE RESISTANT GLUING• flexibility allows quick and easy creation of intricate curves and

circular shapes

• used in furniture making, exhibition work, shopfitting, columns and

framework etc

Code Description

845FPL 2440 x 1220 x 5mm - Long Grain

845FPC 1220 x 2440 x 5mm - Cross Grain

848FPL 2440 x 1220 x 8mm - Long Grain

848FPC 1220 x 2440 x 8mm - Cross Grain

BBA APPROVED CONSTRUCTION PLY WBP - CE2+ EN636-2Metsa Spruce or similar softwood ply construction

• British Board of Agrement (BBA) approved for load bearing applications

• conforms to EN636-2, for use in roofing, flooring andwall sheathing

• CE/CPD compliant as ‘fit for purpose’• PEFC min 70%

Code Description

849BBA 2440 x 1220 x 9mm

8412BBA 2440 x 1220 x 12mm

8418BBA 2440 x 1220 x 18mm

8424BBA 2440 x 1220 x 24mm

SHUTTERING PLY CE4 EN13986 - WBP GLUEElliottis Pine or similar softwood ply

• general purpose use• not suitable for permanent outdoor applications

Code Description

8418SP 2440 x 1220 x 18mm

T & G PLYWOOD FLOORING - CE2+ EN636-2Finnish Spruce, tongued and grooved all 4 edges

• internal use, WBP gluing• graded 111/111 both faces• BBA Approved for load bearing• CE/CPD compliant as ‘fit for purpose’• PEFC min 70%

Code Description

8218TG4P 2400 x 600 x 18mm

MARINE HARDWOOD PLYWOODWBP glueing, long grain, selected durable hardwood veneers throughout.

• suitable for marine, external and internal uses • conforms to BS1088

Code Description

844MP 2440 x 1220 x 4mm

846MP 2440 x 1220 x 6mm

849MP 2440 x 1220 x 9mm

8412MP 2440 x 1220 x 12mm

8418MP 2440 x 1220 x 18mm

8425MP 2440 x 1220 x 25mm

19All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.

Sheet MaterialPlywood

For Flexible Veneer - see page 26

Notes on Glue/Bond TypesWBP: This Glue/Bond type is highly resistant to weather, micro-organisms, cold and boiling water and wet and dry heat. The lifespan of these boards are also subject to the durability ofspecies of veneer used, for example, Hardwood Far Eastern Plywill be more durable than Birch Veneered Ply.

Exterior: This Glue/Bond type conforms to American and Canadiangradings, glues are classed as being 100% waterproof. Again, thedurability of veneer must be taken into consideration, Americanand Canadian Plywoods are coniferous (softwood) species.

Chip

boar

d,O

SB,B

lock

boar

d,Bl

anks

& P

lyw

ood



MDF Medium Density FibreboardManufactured from wood fibres, dry-bonded with synthetic resins thencompressed at high frequency.

• uniform, strong, compact and stable• smooth both faces and uniform in thickness• can be cut and profiled, lipping not normally required• can be screwed, glued or dowelled etc• no grain or splintering problems• used heavily in the furniture industry• ideal for making bespoke furniture, doors and units

It is recommended that a suitable face mask is worn when cutting ormachining, and all faces and edges are sealed with MDF sealer.

STANDARD For Interior Use OnlyCode Description

842MDF 2440 x 1220 x 2/2.5mm

843MDF 2440 x 1220 x 3mm

844MDF 2440 x 1220 x 4mm

846MDF 2440 x 1220 x 6mm – Minimum 50% FSC





8422MDF 2440 x 1220 x 22mm


843ØMDF 2440 x 1220 x 30mm

8438MDF 2440 x 1220 x 38mm

8445MDF 2440 x 1220 x 45mm

8512MDF 2440 x 1525 x 12mm

8518MDF 2440 x 1525 x 18mm

1Ø46MDF 3050 x 1220 x 6mm

1Ø49MDF 3050 x 1220 x 9mm

1Ø412MDF 3050 x 1220 x 12mm

1Ø415MDF 3050 x 1220 x 15mm

1Ø418MDF 3050 x 1220 x 18mm

1Ø425MDF 3050 x 1220 x 25mm

1Ø430MDF 3050 x 1220 x 30mm

1Ø512MDF 3050 x 1525 x 12mm

1Ø518MDF 3050 x 1525 x 18mm

1Ø525MDF 3050 x 1525 x 25mm

LIGHT MDFA specially engineered MDF ideal where high quality coupled with lowweight is required.

• 20% lighter than standard MDF

Code Description

843ØLIGHT 2440 x 1220 x 30mm

1Ø418LIGHT 3050 x 1220 x 18mm

V313 (Moisture Resistant) MDFFor use in areas of high humidity such as kitchens and bathrooms.

Code Description

846MRMDF 2440 x 1220 x 6mm

849MRMDF 2440 x 1220 x 9mm

8412MRMDF 2440 x 1220 x 12mm

8415MRMDF 2440 x 1220 x 15mm

8418MRMDF 2440 x 1220 x 18mm – Minimum 50% FSC

8425MRMDF 2440 x 1220 x 25mm

8430MRMDF 2440 x 1220 x 30mm

10418MRMDF 3050 x 1220 x 18mm

MEDEX (EXTERIOR) MDFA fully exterior MDF, as long as finishing instructions are adhered to

(copies on request).

Code Description

8412XMDF 2440 x 1220 x 12mm

8418XMDF 2440 x 1220 x 18mm

8425XMDF 2440 x 1220 x 25mm

ZF ECOLOGIQUE MDFZero added formaldehyde for use in environmentally sensitive situations such as

museums, hospitals, schools etc.

Code Description

8412ZFMDF 2440 x 1220 x 12mm

8418ZFMDF 2440 x 1220 x 18mm

BEAD AND BUTT MDF V313 (Moisture Resistant)Grooved at 100mm centres. For covering walls and ceilings etc, and because it’s

moisture resistant is particularly suitable

in kitchens and bathrooms

(not shower or bath area).

Code Description

849MRMDFBB 1220 x 2440 x 9mm - cross groove

849MRMDFBBLG 2440 x 1220 x 9mm - long groove

FLEXIBLE MDF• create shapes, go round bends, very versatile

• uses include shopfitting, contoured wall features, bar fronts, columns,

kitchen, bedroom and office furniture

• very cost effective

Code Description

Short Grain (Bend 1220mm Width)

846MDFFS 1220 x 2440 x 6mm

Long Grain (Bend 2440mm Width)

846MDFFL 2440 x 1220 x 6mm

Sheet MaterialMDF

All MDF should be sealedwhen used in enclosed areas

Bead & Butt MDF Flexible MDF


21

MDF

,Han

di-P

anel

s & H

ardb

oard


Pre-Cut Handi-PanelsCUT TO SIZEWBP HARDWOOD PLYWOODCode Description

2Ø774370 1220* x 610* x 3.6/4mm

20777159 2440 x 610 x 3.6/4mm

20734084 1220 x 1220* x 3.6/4mm

2Ø742409 1220* x 610* x 5.5/6mm

2Ø796563 2440 x 610* x 5.5/6mm

2Ø753498 1220 x 1220* x 5.5/6mm

2Ø761813 1220* x 610* x 9mm

2Ø794651 2440 x 610* x 9mm

2Ø7729Ø1 1220 x 1220* x 9mm

2Ø781224 1220* x 610* x 12mm

2Ø735388 2440 x 610* x 12mm

2Ø792312 1220 x 1220* x 12mm

2Ø743703 1220* x 610* x 18mm

2Ø795085 1220 x 1220* x 18mm

2Ø72234Ø 2440 x 610* x 18mm

MDF MEDIUM DENSITY FIBREBOARDCode Description

2Ø734Ø6Ø 1220 x 610* x 6mm

2Ø76588Ø 1220 x 1220* x 6mm

2Ø738181 2440 x 610* x 6mm

2Ø72ØØ49 1220 x 610* x 9mm

2Ø77143Ø 1220 x 1220* x 9mm

2Ø722814 2440 x 610* x 9mm

2Ø7742Ø2 1220 x 610* x 12mm

2Ø776978 1220 x 1220* x 12mm

2Ø725366 2440 x 610* x 12mm

482418MDF 1220 x 610* x 18mm

484818MDF 1220 x 1220* x 18mm

961218MDF 2440 x 305* x 18mm

961818MDF 2440 x 458* x 18mm

962418MDF 2440 x 610* x 18mm

963Ø18MDF 2440 x 762* x 18mm

Dimensions marked * are nominal

HardboardSTANDARDA dense, highly compressed wood fibre sheet material, very smooth on one sidewith a mesh pattern on the reverse.

Code Description

84H 2440 x 1220 x 3.2mm

42H 1220 x 610 x 3.2mm

846H 2440 x 1220 x 6.0mm

OIL TEMPERED• denser and stronger than standard hardboard• greater resistance to moisture• uses include farm buildings, signs, packaging etc

Code Description

84HT 2440 x 1220 x 3.2mm

PERFORATED/PEGBOARDWith regular holes.

Code Description

84HP 2440 x 1220 x 3.2mm

846HP 2440 x 1220 x 6mm

IVORY INSULATION BOARDLow density fibre board faced one side with cream paper, which can be painted.Interior use only.

Code Description

8412I 2440 x 1220 x 12.7mm

PINBOARDA medium density board (not to be confused with MDF) ideal for notice boardsand train set bases.

Code Description

849P 2440 x 1220 x 8/9mm

SUNDEALA ‘K’ BOARDA medium density board (not to be confused with MDF) ideal for notice boardsand train set bases.

Code Description

846SUN 2440 x 1220 x 6mm

849SUN 2440 x 1220 x 9mm

8412SUN 2440 x 1220 x 12mm

Floor Protection BoardPROTECTOR BOARDA low priced plain black board for protecting floors whilst wet trades etc are on site.

Code Description

842PBBP 2440 x 1230 x 2mm

Sheet MaterialHandi-Panels, Hardboard & Floor Protector

Cut to size serviceAs well as ‘off the shelf’ pre-cuthandi-panels in plywood and MDF,Champion also offer a cut-to-sizeservice on most sheet materialitems including worktops.The first two cuts are FREE per sheet.Applies to straight vertical and horizontal cuts only. For bulk or precision cutting – ask for a quote.


Screen PanelDecorative perforated patterns on either hardboard, MDF or Aluminium

• Plain can be decorated. White and veneered also available

• creates a wide range of design possibilities

• use for making dividers, screening, shutters, radiator cabinets

and shopfitting etc

HARDBOARD/MDF BORDER ON ALL 4 EDGESCode Description

231374ØØ RC403MD 1830 x 610mm Nevada Plain

2314Ø172 RC403HBWH 1830 x 610mm Nevada White

23191563 RC263HB 1830 x 610mm Colorado Plain

231971Ø7 RC183MD 1830 x 610mm Ohio Plain

23148499 RC303HB 1830 x 610mm Dakota Plain

2319988Ø RC303HBWH 1830 x 610mm Dakota White

2315126Ø RC433MD 1830 x 610mm Oregon Plain

23154Ø49 RC433HBWH 1830 x 610mm Oregon White

23148215 RC323HB 1830 x 610mm Filigree Plain

2312Ø129 RC333MD 1830 x 610mm Fleur De Lys Plain

VENEERED 2 SIDES - BORDER 2 LONG EDGES, 1 SHORTCode Description

23168Ø91 RC431VEPI 1830 x 610mm Oregon Pine Veneered

ALUMINIUM - BORDER 2 SHORT EDGESCode Description

23145733 RC247ANGE 1000 x 665mm Gold Small Clover

23124844 RC227ANGE 1000 x 665mm Gold Large Clover

23152571 RC387ANGE 1000 x 665mm Gold Oriental

2314Ø561 RC227ANSE 1000 x 665mm Silver Large Clover

23148888 RC387ANSE 1000 x 665mm Silver Oriental

23198241 RC167ANGE 1000 x 665mm Gold Maze

ALUMINIUM - NO BORDERCode Description

23135932 RC127ANGE 1000 x 665mm Gold Interwoven

23191778 RC127ANSE 1000 x 665mm Silver Interwoven

Decorative MDFTOPAN COLOURED V313 MDF

• solid colour throughout

• V313 moisture resistant

Code Description

8661ØMDFTBK 2620 x 1830 x 10mm Black

8661ØMDFTBL 2620 x 1830 x 10mm Blue

8661ØMDFTG 2620 x 1830 x 10mm Green

8661ØMDFTR 2620 x 1830 x 10mm Red

8661ØMDFTY 2620 x 1830 x 10mm Yellow

86619MDFTBK 2620 x 1830 x 19mm Black

86619MDFTBL 2620 x 1830 x 19mm Blue

86619MDFTG 2620 x 1830 x 19mm Green

86619MDFTR 2620 x 1830 x 19mm Red

86619MDFTY 2620 x 1830 x 19mm Yellow

Above subject to availability

MELAMINE 2 SIDESCode Description

8418MFMDFW 2440 x 1220 x 18mm Matt White

Pre-glued Edging for above

2Ø573Ø1Ø 22mm x 50m Roll Matt White

LACQUERED 1 SIDESCode Description

843WLMDF 2440 x 1220 x 3mm White

Decorative Sheet MaterialScreen Panel & Decorative MDF


NEVADA PLAIN RC403MD MDF

DAKOTA PLAINRC303HB Hardboard

FLEUR DE LYS PLAINRC333MD MDF

OHIO PLAIN RC183MD MDF

FILIGREE PLAINRC323HB Hardboard

OREGON PLAINRC433MD MDF

SILVER INTERWOVENRC127ANSE Aluminium

SILVER ORIENTALRC387ANSE Aluminium

GOLD INTERWOVENRC127ANGE Aluminium

NO BORDER

GOLD SMALL CLOVERRC247ANGE Aluminium

COLORADO PLAIN RC263HB Hardboard

BLACK BLUE

RED YELLOW

GREEN



ASH VENEEREDCode Description

846MDFA 2440 x 1220 x 6mm - 1 side

841ØMDFA 2440 x 1220 x 10mm - 2 sides

8413MDFA 2440 x 1220 x 13mm - 2 sides

8418MDFA 2440 x 1220 x 19mm - 2 sides

1Ø418MDFA 3050 x 1220 x 19mm - 2 sides

8426MDFA 2440 x 1220 x 26mm - 2 sides

WHITE BEECH VENEEREDCode Description

846MDFBSS 2440 x 1220 x 6mm - 1 side

841ØMDFB 2440 x 1220 x 10mm - 2 sides

8413MDFB 2440 x 1220 x 13mm - 2 sides

8418MDFB 2440 x 1220 x 19mm - 2 sides

8426MDFB 2440 x 1220 x 26mm - 2 sides

STEAMED BEECH VENEEREDCode Description

841ØMDFBS 2440 x 1220 x 10mm - 2 sides

8413MDFBS 2440 x 1220 x 13mm - 2 sides

8419MDFBS 2440 x 1220 x 19mm - 2 sides

1Ø419MDFBS 3050 x 1220 x 19mm - 2 sides

8426MDFBS 2440 x 1220 x 26mm - 2 sides

CHERRY VENEEREDCode Description

846MDFC 2440 x 1220 x 6mm - 1 side

8410MDFC 2440 x 1220 x 10mm - 2 sides

8413MDFC 2440 x 1220 x 13mm - 2 sides

8418MDFC 2440 x 1220 x 19mm - 2 sides

8426MDFC 2440 x 1220 x 26mm - 2 sides

QUARTER CUT OAK VENEEREDCode Description 844MDFO 2440 x 1220 x 4mm - 1 side

846MDFO 2440 x 1220 x 6mm - 1 side

841ØMDFO 2440 x 1220 x 10mm - 2 sides

8413MDFO 2440 x 1220 x 13mm - 2 sides

8418MDFO 2440 x 1220 x 19mm - 2 sides

1Ø418MDFO 3050 x 1220 x 19mm - 2 sides

8426MDFO 2440 x 1220 x 26mm - 2 sides

CROWN CUT OAK VENEEREDCode Description

846MDFCO 2440 x 1220 x 6mm - 1 side

841ØMDFCO 2440 x 1220 x 10mm - 2 sides

8413MDFCO 2440 x 1220 x 13mm - 2 sides

8418MDFCO 2440 x 1220 x 19mm - 2 sides

8426MDFCO 2440 x 1220 x 26mm - 2 sides

PINE VENEEREDCode Description

846MDFPSS 2440 x 1200 x 6mm - 1 side

841ØMDFP 2440 x 1220 x 10mm - 2 sides

8413MDFP 2440 x 1220 x 13mm - 2 sides

8418MDFP 2440 x 1220 x 19mm - 2 sides

1Ø418MDFP 3050 x 1220 x 19mm - 2 sides

8426MDFP 2440 x 1220 x 26mm - 2 sides

MAPLE/SYCAMORE VENEEREDCode Description

846MDFM 2440 x 1220 x 6mm - 1 side

841ØMDFM 2440 x 1220 x 10mm - 2 sides

8413MDFM 2440 x 1220 x 13mm - 2 sides

8418MDFM 2440 x 1220 x 19mm - 2 sides

1Ø418MDFM 3050 x 1220 x 19mm - 2 sides

8426MDFM 2440 x 1220 x 26mm - 2 sides

CROWN CUT SAPELE VENEEREDCode Description

846MDFS 2440 x 1220 x 6mm - 1 side

841ØMDFS 2440 x 1220 x 10mm - 2 sides

8413MDFS 2440 x 1220 x 13mm - 2 sides

8418MDFS 2440 x 1220 x 19mm - 2 sides

1Ø418MDFS 3050 x 1220 x 19mm - 2 sides

8426MDFS 2440 x 1220 x 26mm - 2 sides

TEAK VENEEREDCode Description

8418MDFT 2440 x 1220 x 19mm - 2 sides

QUARTER CUT WENGE VENEEREDCode Description

8419MDFW 2440 x 1220 x 19mm - 2 sides

BLACK AMERICAN WALNUT VENEERED Code Description

846MDFWB 2440 x 1220 x 6mm - 1 side

8413MDFWB 2440 x 1220 x 13mm - 2 sides

8419MDFWB 2440 x 1220 x 19mm - 2 sides

8426MDFWB 2440 x 1220 x 26mm - 2 sides

EDGING – 50m ROLLS – REAL WOOD PRE-GLUEDCode Description

ES19A 19mm/22mm Ash

ES19B 19mm/22mm Beech

ES19BS 19mm/22mm Steamed Beech

ES19C 19mm/22mm Cherry

ES19M 19mm/22mm Sapele

ES19Ø 19mm/22mm Oak

ES3ØØ 30mm White Oak

ES19P 19mm/22mm Pine

ES19MAP 19mm/22mm Maple

ES19T 19mm/21mm Teak

ES19W 19mm/22mm Walnut

ES19WEN 19mm/22mm Wenge

30mm x 50m rolls also available in all the above veneers exceptTeak and Wenge

23

Scre

en P

anel

,Dec

orat

ive

& V

enee

red

MDF


Decorative Sheet MaterialVeneered MDF


Decorative Sheet MaterialWood Veneered & Melamine Faced Chipboard


Wood Veneered andMelamine FacedChipboardLipped two long edgesChipboard core used is supersmooth 3 layer construction of anaverage 650mm density.

• surface finish ensures no chips are ‘grinning’ through the surface

• boards are bonded for life

• melamine used is classed as durable

• wood veneers used are ‘A’ grade, bonded to both faces

As well as this range of standardsizes, we can also have boards madeto measure and edged up to all fouredges if required. Straight cut shapesare also possible. We will be pleased to quote you.

WHITE MELAMINE FACED1830mm length 15-16mm thickness

Code Description

2Ø59154Ø 1830 x 152mm

2Ø54Ø166 1830 x 228mm

2Ø588779 1830 x 305mm

2Ø586ØØ3 1830 x 381mm

2Ø534615 1830 x 457mm

2Ø583231 1830 x 531mm

2Ø531843 1830 x 610mm

2Ø529062 1830 x 687mm

2Ø577681 1830 x 762mm

2Ø52629Ø 1830 x 915mm2440mm length 15-16mm thickness

2Ø574918 2440 x 152mm

2Ø572136 2440 x 228mm

2Ø520748 2440 x 305mm

2Ø569365 2440 x 381mm

2Ø545260 2440 x 457mm

2Ø566593 2440 x 531mm

2Ø56382Ø 2440 x 610mm

2Ø537036 2440 x 687mm

2Ø561048 2440 x 762mm

2Ø532918 2440 x 915mmMAGNOLIA MELAMINE FACED2440mm length 15-16mm thickness

Code Description

2Ø59Ø253 2440 x 152mm

2Ø538866 2440 x 228mm

2Ø536Ø91 2440 x 305mm

2Ø5847Ø2 2440 x 381mm

2Ø58193Ø 2440 x 457mm

2Ø53Ø549 2440 x 531mm

2Ø579159 2440 x 610mmGREY MELAMINE FACED2440mm length 15-16mm thickness

Code Description

2Ø527778 2440 x 152mm

2Ø524999 2440 x 228mm

2Ø573614 2440 x 305mm

2Ø522223 2440 x 381mm

2Ø57Ø835 2440 x 457mm

2Ø523213 2440 x 531mm

2Ø584146 2440 x 610mm

MAHOGANY MELAMINE FACED2440mm length 15-16mm thickness

Code Description2Ø54Ø333 2440 x 152mm

2Ø588953 2440 x 228mm

2Ø537562 2440 x 305mm

2Ø586188 2440 x 381mm

2Ø583408 2440 x 457mm

2Ø532Ø24 2440 x 531mm

2Ø58Ø636 2440 x 610mmBLACK ASH MELAMINE FACED2440mm length 15-16mm thickness

Code Description

2Ø565299 2440 x 152mm

2Ø583378 2440 x 228mm

2Ø562526 2440 x 305mm

2Ø559748 2440 x 381mm

2Ø581831 2440 x 457mm

2Ø556976 2440 x 531mm

2Ø581Ø77 2440 x 610mmLIGHT OAK MELAMINE FACED2440mm length 15-16mm thickness

Code Description

2Ø598518 2440 x 152mm

2Ø551421 2440 x 228mm

2Ø594398 2440 x 305mm

2Ø54865Ø 2440 x 381mm

2Ø545888 2440 x 457mm

2Ø594497 2440 x 531mm

2Ø543112 2440 x 610mm

STEAMED BEECH MELAMINE2440mm length 15-16mm thickness

Code Description

2Ø585525 2440 x 152mm

2Ø523275 2440 x 228mm

2Ø531591 2440 x 305mm

2Ø539917 2440 x 381mm

2Ø596842 2440 x 457mm

2Ø556556 2440 x 531mm

2Ø599218 2440 x 610mmMAPLE MELAMINE FACED2440mm length 15mm thickness

\

Code Description

2Ø58Ø933 2440 x 152mm

2Ø52252Ø 2440 x 228mm

2Ø537Ø67 2440 x 305mm

2Ø54Ø463 2440 x 381mm

2Ø53Ø679 2440 x 457mm

2Ø561178 2440 x 531mm

2Ø556921 2440 x 610mmLIMED OAK MELAMINE FACED2440mm length 15mm thickness

Code Description2Ø5499Ø9 2440 x 152mm

2Ø545659 2440 x 228mm

2Ø533Ø9Ø 2440 x 305mm

2Ø594091 2440 x 381mm

2Ø52Ø274 2440 x 457mm

2Ø598167 2440 x 531mm

2Ø534219 2440 x 610mm


Decorative Sheet MaterialWood Veneered & Melamine Faced Chipboard

25

Woo

d Ve

neer

ed &

Mel

amin

e Fa

ced

Chip

boar

d


BLEACHED ASH MELAMINE FACED2440mm length 15mm thickness

Code Description

2Ø556457 2440 x 152mm

2Ø532796 2440 x 228mm

2Ø564421 2440 x 305mm

2Ø549Ø84 2440 x 381mm

2Ø527488 2440 x 457mm

2Ø552442 2440 x 531mm

2Ø52Ø465 2440 x 610mmAFRICAN MAHOGANY2 SIDES WOOD VENEERED BOARD2440mm length 15-16mm thickness

Code Description

2Ø561222 2440 x 152mm

2Ø584689 2440 x 228mm

2Ø558451 2440 x 305mm

2Ø555672 2440 x 381mm

2Ø576455 2440 x 457mm

2Ø5529Ø9 2440 x 531mm

2Ø572334 2440 x 610mm

2Ø598747 2440 x 687mm

2Ø547356 2440 x 762mm

2Ø595975 2440 x 915mmOAK 2 SIDESWOOD VENEERED BOARD2440mm length 15-16mm thickness

Code Description

2Ø544584 2440 x 152mm

2Ø541811 2440 x 228mm

2Ø59042Ø 2440 x 305mm

2Ø539Ø3Ø 2440 x 381mm

2Ø587659 2440 x 457mm

2Ø584887 2440 x 531mm

2Ø533496 2440 x 610mm

Iron-on Edging StripCode Description

2Ø575267 19mm White Melamine IE811 10m roll

2Ø5211Ø3 19mm Mahogany Melamine IE813 10m roll

2Ø538767 19mm Light Oak Melamine 10m roll

2Ø595876 19mm Beech Melamine 10m roll

2Ø523879 19mm Magnolia Melamine IE815 10m roll

2Ø530082 19mm Maple Melamine 10m roll

2Ø597511 19mm Pearwood Melamine 10m roll

2Ø574451 19mm Stilo Walnut Melamine 10m roll

2Ø562212 19mm Bleached Ash Melamine 10m roll

2Ø587239 19mm Limed Oak Melamine 10m roll

2Ø533458 19mm Pine Wood Veneer 10m roll

2Ø551797 19mm Oak Wood Veneer 10m roll

ANTIQUE PINE MELAMINE FACED2440mm length 15mm thickness

Code Description2Ø584122 2440 x 152mm

2Ø578213 2440 x 228mm

2Ø531263 2440 x 305mm

2Ø525569 2440 x 381mm

2Ø535339 2440 x 457mm

2Ø576929 2440 x 531mm

2Ø55Ø493 2440 x 610mmPEARWOOD MELAMINE FACED2440mm length 15mm thickness

Code Description

2Ø529611 2440 x 152mm

2Ø554569 2440 x 228mm

2Ø53Ø9Ø7 2440 x 305mm

2Ø578Ø46 2440 x 381mm

2Ø587Ø17 2440 x 457mm

2Ø565497 2440 x 531mm

2Ø555696 2440 x 610mmSTILO WALNUT MELAMINE FACED2440mm length 15mm thickness

Code Description

2Ø591731 2440 x 152mm

2Ø587598 2440 x 228mm

2Ø547196 2440 x 305mm

2Ø551Ø87 2440 x 381mm

2Ø53Ø2Ø4 2440 x 457mm

2Ø552381 2440 x 531mm

2Ø5315Ø8 2440 x 610mm

PINE 2 SIDESWOOD VENEERED BOARD

2440mm length 15-16mm thickness

Code Description

2Ø582111 2440 x 152mm

2Ø53Ø716 2440 x 228mm

2Ø527945 2440 x 305mm

2Ø576561 2440 x 381mm

2Ø52517Ø 2440 x 457mm

2Ø573799 2440 x 531mm

2Ø571Ø16 2440 x 610mmSHEET DECORATIVE CHIPBOARDUNLIPPED - MELAMINE 2 SIDES8415MFCW

2440 x 1220 x 15mm Matt White

Champion stock all the fixings, fittings,finishes and tools to go with timber

Decorative Sheet MaterialVeneer, Pine & Oak Panel


Solid PinePanelEdge LaminatedManufactured using Scandinavian

Redwood Pine, not the cheaper less

attractive spruce. Constructed from

narrow widths of kiln dried timber

averaging around 12% moisture

content, which is then edge-glued

together achieving a very strong

board, in dimensions wider than can

be naturally grown.

• cut it, carve it, shape it…no need for edging strips

• used for making furniture, built-in wardrobes, worktops, shelving, stair treads etc

IMPORTANTTo maintain stability we recommendall surfaces and all edges aftercutting and shaping are sealed witheither the appropriate coats of paintor 2-3 coats of good qualitywaterproof polyurethane or varnish.Pine Board is not suitable forexterior use. Do not allow thisproduct to stand in a centrally heatedenvironment without having firstsealed and fixed.

17/18mm THICKCode Description

41217TLM 1.2m x 300mm

41617TLM 1.2m x 400mm

42Ø17TLM 1.2m x 500mm

42417TLM 1.2m x 600mm

61217TLM 1.8m x 300mm

61617TLM 1.8m x 400mm

62Ø17TLM 1.8m x 500mm

62417TLM 1.8m x 600mm

8917TLM 2.4m x 225mm

81217TLM 2.4m x 300mm

81617TLM 2.4m x 400mm

82Ø17TLM 2.4m x 500mm

82417TLM 2.4m x 600mm


41227TLM 1.2m x 300mm

42427TLM 1.2m x 600mm

61227TLM 1.8m x 300mm

62427TLM 1.8m x 600mm

81227TLM 2.4m x 300mm

81627TLM 2.4m x 400mm

82Ø27TLM 2.4m x 500mm

82427TLM 2.4m x 600mm33mm THICK PINESTRINGER BLANKCode Description

151133TLM 4.47m x 270mm

28mm THICK PINE STAIR TREADBULLNOSEDCode Description

91128TLM 2.7m x 270mm

SolidEuropeanOak PanelEdge LaminatedAn Oak version of the Pine panel.

• With these panels wide widths of solid Oak are now achievable – stable, economical and a lot less work

• Solid Oak throughout – cut it, carve it, shape it… no need for edging strips


52418LOP 1.5m x 600mm

62418LOP 1.8m x 600mm

72418LOP 2.1m x 600mm

82418LOP 2.4m x 600mm

Flexible VeneerFLEXI-VENEERGenuine grade ‘A’ wood veneer bonded to a flexible backing.

• will not crack or split like ordinary veneers• use on flat or curved surfaces• glue to substrate using PVA (preferred) adhesives,

although contact adhesives will do• will take light staining or oiling• finishes should be plasticized versions eg.

Rustins Clear Plastic Coating

Code Description

84Ø6FVA 2500 x 1240 x 0.6mm Ash - 1 side

84Ø6FVBS 2500 x 1240 x 0.6mm Steamed Beech - 1 side

84Ø6FVBW 2500 x 1240 x 0.6mm White Beech - 1 side

84Ø6FVC 2500 x 1240 x 0.6mm Cherry - 1 side

84Ø6FVM 2500 x 1240 x 0.6mm Maple - 1 side

84Ø6FVOQC 2500 x 1240 x 0.6mm Oak 1⁄4 Cut - 1 side

84Ø6FVOCC 2500 x 1240 x 0.6mm Oak Crown Cut - 1 side

84Ø6FVP 2500 x 1240 x 0.6mm Pine - 1 side

84Ø6FVSCC 2500 x 1240 x 0.6mm Sapele Crown Cut - 1 side

84Ø6FVSQC 2500 x 1240 x 0.6mm Sapele 1⁄4 Cut - 1 side

84Ø6FVWAB 2500 x 1240 x 0.6mm Walnut, American Black - 1 side

Bonded LaminatesWood VeneerIron-on self-adhesive wood veneers. Unfinished to stain or varnish.

Code Description

22366Ø78 2440 x 250mm Sapele Type Wood Veneer

22332431 2440 x 250mm Ash Type Wood Veneer

22368843 2440 x 250mm Teak Type Wood Veneer

22371621 2440 x 250mm Oak Type Wood Veneer

22362056 2440 x 250mm American Black Walnut Type Wood Veneer

Guide to Veneers For a guide to the above veneers please refer to page 23…


27

WorktopsPostform Laminated & Hardwood Worktops


Postform WorktopsPostformed Laminated WorktopsHigh pressure laminate bonded to a high quality chipboard core.

• meets BS3794

• highly scratch resistant

• alcohol, cosmetic and household chemical resistant

• front underside edge sealed to resist water

• out performs cheaper quality worktops

• available single postformed edge (1pfe) or 2 edges postformed

(2pfe) for breakfast bars etc

40mm THICKCode Description

24634328 3000 x 600mm Polyrey Odyssey 1pfe Blanc Megeve, White

24670371 3000 x 600mm Polyrey Odyssey 1pfe Lima, Gloss

24668842 3000 x 600mm Warerite Oasis 1pfe Beech Butcher Block

24630078 3000 x 600mm Warerite Oasis 1pfe Jet

Solid Hardwood TopsManufactured using solid hardwood blocks, finger jointed, then high

frequency glued and sanded to give a uniform thickness. We offer a range

of oils and finishes suitable for use where food is being prepared.

SOLID HARDWOOD - 26/27mm THICKCode Description

246712ØØ 3050 x 750 x 26mm Iroko

24635Ø11 3050 x 750 x 26mm European Walnut

24674Ø1Ø 3050 x 750 x 26mm Prime Beech

24648976 3000 x 650 x 27mm Beech A/B Grade

24692274 3000 x 650 x 27mm Oak A/B GradeSOLID HARDWOOD - 40/42mm THICKCode Description

246336Ø4 3000 x 650 x 40mm Beech A/B Grade



24666862 2000 x 1000 x 42mm Beech Butcher Block

2462183Ø 3050 x 650 x 42mm Rustic Beech

246279ØØ 3050 x 900 x 42mm Rustic Beech

24638999 4200 x 650 x 42mm Rustic Beech

24663953 3050 x 650 x 42mm Prime Beech

24666466 3050 x 900 x 42mm Prime Beech

2464Ø299 4200 x 650 x 42mm Prime Beech

24642583 4200 x 900 x 42mm Prime Beech

24661331 3000 x 650 x 40mm Oak A/B Grade

24672429 3000 x 900 x 40mm Oak A/B Grade

2468Ø745 4000 x 650 x 40mm Oak A/B Grade

24676427 3050 x 650 x 42mm Oak

24629379 3050 x 900 x 42mm Oak

24640466 4200 x 650 x 42mm Oak

246253Ø2 3050 x 650 x 42mm Maple

24687782 3050 x 900 x 42mm Maple

2469887Ø 4200 x 650 x 42mm Maple

24642ØØ2 3050 x 650 x 42mm Iroko

2464Ø19Ø 3050 x 900 x 42mm Iroko

24649384 4200 x 900 x 42mm Iroko

246371Ø7 3050 x 650 x 42mm European Walnut

24672627 3050 x 900 x 42mm European Walnut

24621373 3000 x 650 x 40mm Wenge

24625982 3000 x 900 x 40mm Wenge

24635547 4000 x 650 x 40mm Wenge

SOLID HARDWOOD - 60mm THICKCode Description

24663366 3000 x 650 x 60mm Prime Beech

2468277Ø 3000 x 900 x 60mm Prime Beech

24627313 3000 x 650 x 60mm European Oak

24643955 3000 x 900 x 60mm European Oak

Vene

er,S

olid

Pan

el &

Wor

ktop

s

MAPLE

IROKO

OAK RUSTIC BEECH

PRIME BEECH

EUROPEAN WALNUT


Champion Timber Branches:

Delivering over a wide area

Pick up a brochure at any branchor phone free on:

0800 068 2021Download a brochure atwww.championtimber.com

Moorfield Road, Slyfield Industrial Estate, Guildford,GU1 1RU

Tel: 01483 510170Fax: 01483 510171Email: [email protected] Mon to Fri 7.30am – 5pm Sat 8am – 5pm

GUILDFORD

205 - 209 Burlington Road, New Malden,Surrey, KT3 4NB

Tel: 020 8949 1621Fax: 020 8942 9752Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5pm

NEW MALDEN also HEAD OFFICE

2 Hartfield Crescent, entrance off Beulah Road,Wimbledon, SW19 3SD


WIMBLEDON

CLAYGATE DORKING

Fircroft Way Industrial Estate,Edenbridge, Kent, TN8 6EL

Tel: 01732 864328Fax: 01732 863690Email: [email protected] Mon to Fri 8am – 5pm Sat 8am – 5pm

EDENBRIDGE

385 Leatherhead Road,Chessington, Surrey, KT9 2NQ

Tel: 01372 847910 Fax: 01372 847911Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm

CHESSINGTON

272 - 274 High Street, Sutton,Surrey, SM1 1PG

Tel: 020 8642 8291Fax: 020 8770 9171Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm

SUTTON

109-123 Southlands Road,Bromley, Kent, BR2 9QX


BROMLEY

High Street, Claygate,Surrey, KT10 0JW

Tel: 01372 462407Fax: 01372 468414Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm

Curtis Road, Dorking,Surrey, RH4 1EJ

Tel: 01306 884418Fax: 01306 889798Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm

March 2008

champion sheet materials and insulation

Documents

planed timber

local branch

timber merchants

independent timber specialists

branch details

product range

local deliveries

quality of product