chapter 10: repositioning, transfers, and ambulation

31
CHAPTER 10: REPOSITIONING, TRANSFERS, AND AMBULATION

Upload: emory-gibson

Post on 30-Dec-2015

284 views

Category:

Documents


0 download

TRANSCRIPT

CHAPTER 10: REPOSITIONING,

TRANSFERS, AND AMBULATION

LEARNING OBJECTIVES

Review the principles of body mechanics

Describe how to safely position residents

Describe how to safely transfer residents

PRINCIPLES OF BODY MECHANICS Alignment

Base of support

Center of gravity

Fulcrum and lever

Guidelines for using proper body mechanics

SAFELY POSITIONING RESIDENTS Positioning

Logrolling

Shearing

Draw sheet

Dangle

SAFELY POSITIONING RESIDENTS:POSITIONS Supine

Lateral

Prone

Fowler’s

Sims’

MOVING A RESIDENT UP IN BED: WHEN HE OR SHE CAN HELP1. Identify yourself by name. Identify the resident

by name.2. Wash your hands.3. Explain procedure to the resident. Speak

clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Provide for the resident’s privacy with curtain, screen, or door.5. Adjust bed to a safe level, usually waist high.

Lock bed wheels. 6. Lower the head of bed to make it flat. Move the pillow to the head of the bed. 7. If the bed has side rails, raise the rail on the far

side of the bed. 8. Stand by bed with your feet shoulder-width

apart, facing the resident.9. Place one arm under resident’s shoulder

blades. Place the other arm under resident’s thighs. Use proper body mechanics.

10. Ask resident to bend her knees, place her feet firmly on the mattress, and push her feet and hands on the count of three.

11. On the count of three, shift your body weight, and help move resident while she pushes with her feet. As always, allow the resident to do all she can for herself.

12. Make resident comfortable. Put pillow back under resident’s head and arrange the blankets for her.

13. Return bed to lowest position. Remove privacy measures.

14. Place call light within resident’s reach.15. Wash your hands.16. Report any changes in resident to

the nurse. Document procedure using facility guidelines.

MOVING A RESIDENT UP IN BED: WHEN HE OR SHE CANNOT HELP1. Follow steps 1 through 6 above.2. Stand behind the head of the bed with your feet shoulder-width apart and one foot slightly in front of the other.3. Roll and grasp the top edge of the draw sheet.4. Bend your knees and keep your back straight.

Rock your weight from the front foot to the back foot in one smooth motion, while pulling the draw sheet and resident toward the head of the bed.

5. Make resident comfortable. Put pillow back under resident’s head and arrange the blankets for her. Unroll the draw sheet and leave it in place for the next repositioning. 6. Return bed to lowest position. Remove privacy

measures. 7. Place call light within resident’s reach.8. Wash your hands.9. Report any changes in resident to the nurse.

Document procedure using facility guidelines.

MOVING A RESIDENT UP IN BED: HELP FROM ANOTHER PERSON1. Follow steps 1 through 6 above.2. Stand on the opposite side of the bed from your helper.

Each of you should be turned slightly toward the head of the bed. For each of you, the foot that is closest to the head of the bed should be pointed in that direction. Stand with your feet about shoulder-width apart. Bend your knees. Keep your back straight.

3. Roll the draw sheet up to the resident’s side, and have your helper do the same on her side of the bed. Grasp the sheet with your palms up, and have your helper do the same.

4. Shift your weight to your back foot (the foot closer to the foot of the bed) and have your helper do the same. On the count of three, you and your helper both shift your weight to your forward foot. Slide the draw sheet and resident toward the head of the bed.

5. Make resident comfortable. Put pillow back under resident’s head and arrange the blankets for her. Unroll the draw sheet and leave it in place for the next repositioning.

6. Return bed to lowest position. Remove privacy measures.

7. Place call light within resident’s reach.

8. Wash your hands.

9. Report any changes in resident to the nurse. Document procedure using facility guidelines.

MOVING A RESIDENT TO THE SIDE OF THE BED1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and

directly. Maintain face-to-face contact whenever possible.4. Provide for the resident’s privacy with curtain, screen, or door.5. Adjust bed to a safe level, usually waist high. Lock bed wheels.6. Lower the head of bed.7. Stand on the same side of the bed to where you are moving the resident. Stand with feet shoulder-width apart, and bend your knees.8. With a draw sheet: Roll the draw sheet up to the resident’s side, and grasp the sheet with your palms up. One hand should be at the resident’s shoulders, the other about level with the resident’s hips. Apply one knee against the side of the bed, and lean back with your body. On the count of three, slowly pull the draw sheet and resident toward you.Without a draw sheet: Gently slide your hands under the head and shoulders and move toward you. Gently slide your hands under her midsection and move it toward you. Gently slide your hands under the hips and legs and move them toward you.9. Make resident comfortable. 10. Return bed to lowest position. Remove privacy measures. 11. Place call light within resident’s reach.12. Wash your hands.13. Report any changes in resident to the nurse. Document

procedure using facility guidelines.

TURNING A RESIDENT

1. Identify yourself by name. Identify the resident by name.

2. Wash your hands.3. Explain procedure to the resident. Speak

clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Provide for the resident’s privacy with curtain, screen, or door.

5. Adjust bed to a safe level, usually waist high. Lock bed wheels.

6. Lower the head of bed. 7. Stand on side of bed opposite to where

resident will be turned. If the bed has side rails, raise the far side rail. Lower side rail nearest you if it is up.

8. Move resident to side of bed nearest you using previous procedure.

9. Turning resident away from you: Cross resident’s arm over her chest. Move arm on side resident is being turned to out of the way. Cross the leg nearest you over the far leg.

Stand with feet shoulder-width apart. Bend your knees.

Place one hand on the resident’s shoulder. Place the other hand on the resident’s nearest hip.

Gently push the resident onto side as one unit, toward the other side of bed (toward raised side rail if present). Shift your weight from your back leg to your front leg.

Turning resident toward you: Cross resident’s arm over his chest. Move arm on side

resident is being turned to out of the way. Cross the leg furthest from you over the near leg.

Stand with feet shoulder-width apart. Bend your knees.

Place one hand on the resident’s far shoulder. Place the other hand on the far hip.

Gently roll the resident toward you. Your body will block resident and prevent him from rolling out of bed.Continued on next

slide

TURNING A RESIDENT: CONTINUED10. Position the resident properly, comfortably, and in good alignment. Proper positioning includes the following:• Head supported by pillow

• Shoulder adjusted so resident is not lying on arm

• Top arm supported by pillow

• Back supported by supportive device

• Top knee flexed

• Supportive device between legs with top knee flexed; knee and ankle supported

11. Return bed to lowest position. Remove privacy measures. 12. Place call light within resident’s reach.13. Wash your hands.14. Report any changes in resident to the nurse. Document procedure using facility guidelines.

LOGROLLING A RESIDENT1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face

contact whenever possible.4. Provide for the resident’s privacy with curtain, screen, or door.5. Adjust bed to a safe level, usually waist high. Lock bed wheels.6. Lower the head of the bed.7. Both people stand on the same side of the bed. One person stands at the resident’s head and shoulders. The other stands near the resident’s midsection.8. Place the resident’s arms across his chest. Place a pillow between the knees.9. Stand with your feet shoulder-width apart. Bend your knees.10. Grasp the draw sheet on the far side. 11. On the count of three, gently roll the resident toward you. Turn the resident as a unit. Your bodies will block the resident and prevent him from rolling out of bed.12. Make resident comfortable. Arrange pillows and covers for comfort. 13. Return bed to lowest position. Remove privacy measures. 14. Place call light within resident’s reach.15. Wash your hands.16. Report any changes in resident to the nurse. Document procedure using facility guidelines.

ASSISTING A RESIDENT TO SIT UP ON SIDE OF BED: DANGLING1. Identify yourself by name. Identify the resident by name. 2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.4. Provide for the resident’s privacy with curtain, screen, or door.5. Adjust bed to lowest position. Lock bed wheels.6. Raise the head of bed to sitting position. Fanfold (fold into pleats) the top covers to the foot of the bed. Ask the resident to turn onto his side,

facing you. Assist as needed (see earlier procedure).7. Tell the resident to reach across his chest with his top arm and place his hand on the edge of the bed near his opposite shoulder. Ask him to

push down on that hand to raise his shoulders up while swinging his legs over the side of the bed.8. Always allow the resident to do all he can for himself. However, if the resident needs assistance, follow these steps:

a. Stand with your legs shoulder-width apart. Bend your knees.

b. Place one arm under the resident’s shoulder blades. Place the other arm under the resident’s thighs.

c. On the count of three, slowly turn resident into sitting position with legs dangling over side of bed. The weight of the resident’s legs hanging down from the bed helps the resident sit up.

9. Ask resident to hold onto the edge of mattress with both hands. Assist resident to put on non-skid shoes or slippers. 10. Have resident dangle as long as ordered. The care plan may direct you to allow the resident to dangle for several minutes and then return him to lying down, or it may direct you to allow the resident to dangle in preparation for walking or a transfer. Follow the care plan. Do not leave the resident alone. If the resident is dizzy for more than a minute, have him lie down again and report to the nurse. 11. Take vital signs as ordered (you will learn how to take vital signs in Chapter 14).12. Remove slippers or shoes. 13. Gently assist resident back into bed. Place one arm around resident’s shoulders and the other arm under the resident’s knees. Slowly swing resident’s legs onto bed14. Make resident comfortable. 15. Leave bed in lowest position. Remove privacy measures. 16. Place call light within resident’s reach.17. Wash your hands.18. Report any changes in resident to the nurse. Document procedure using facility guidelines.

HOW TO SAFELY TRANSFER PATIENTS Ergonomics

Transfer/gait belt

Slide board

APPLYING A TRANSFER BELT

1. Identify yourself by name. Identify the resident by name. 2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Provide for the resident’s privacy with curtain, screen, or door.5. Adjust bed to lowest position. Lock bed wheels.6. Assist the resident to a sitting position with feet flat on the floor.7. Put non-skid footwear on resident and make sure laces are tied.8. Place the belt over the resident’s clothing and around the waist. Do not put it over bare skin.9. Tighten the buckle until it is snug. Leave enough room to insert flat fingers/hand comfortably under the belt.

10. Check to make sure that skin or skin folds (for example, breasts) are not caught under the belt.

11. Position the buckle slightly off-center in the front or back for comfort.

HOW TO SAFELY TRANSFER RESIDENTSGuidelines to know for wheelchairs

What to do when a resident starts to fall

Guidelines for using stretchers

Guidelines for using mechanical lifts

Guidelines for stand-up lifts

TRANSFERRING A RESIDENT FROM BED TO WHEELCHAIR1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.4. Provide for the resident’s privacy with curtain, screen, or door. Check the area to be certain it is uncluttered and safe.5. Remove both wheelchair footrests close to the bed.6. Place wheelchair near the head of the bed with arm of the wheelchair almost touching the bed. Wheelchair should be facing

the foot of the bed. The wheelchair should be placed on resident’s stronger, or unaffected, side.7. Lock wheelchair wheels.8. Raise the head of the bed. Adjust bed to lowest position. Lock bed wheels.9. Assist resident to sitting position with feet flat on the floor. Let resident sit for a few minutes to adjust to the change in

position.10. Put non-skid footwear on resident and fasten securely.11. Stand in front of resident with your feet about shoulder-width apart. Bend your knees.12. Place the transfer belt around resident’s waist over clothing (not on bare skin). Grasp belt securely on both sides.13. Provide instructions to allow resident to help with transfer. Instructions may include: “When you start to stand, push with your hands against the bed.” “Once standing, if you’re able, you can take small steps in the direction of the chair.” “Once standing, reach for the chair with your stronger hand.” 14. With your legs, brace (support) resident’s lower legs to prevent slipping. This can be done by placing one or both of your

knees in front of the resident’s knees.15. Count to three to alert resident. On three, with hands still grasping the transfer belt on both sides and moving upward, slowly help resident to stand.

Continued on next slide

TRANSFERRING A RESIDENT FROM BED TO WHEELCHAIR (CONTINUED) 16. Tell the resident to take small steps in the direction of the chair while turning his back toward the chair. Or, if more assistance is needed, help the resident pivot (turn) to stand in front of wheelchair with back of resident’s legs against wheelchair. 17. Ask the resident to put hands on wheelchair arm rests if able. When the chair is touching the back

of the resident’s legs, help the resident lower himself into the chair.18. Reposition resident so that his hips touch the back of the wheelchair seat. Remove transfer belt if

used.19. Attach footrests and place the resident’s feet on the footrests. Check that the resident is in proper

alignment. Make resident comfortable. Place a lap robe or folded blanket over the resident’s lap as appropriate.

20. Remove privacy measures.21. Place call light within resident’s reach.22. Wash your hands.23. Report any changes in resident to the nurse. Document procedure using facility guidelines.

When transferring back to bed from a wheelchair, the height of the bed should be equal to or slightly lower than the chair. Help the resident pivot to the bed. When the resident feels the bed with the back of his legs, help him sit down slowly.

TRANSFERRING A RESIDENT FROM BED TO STRETCHER1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever

possible.4. Provide for the resident’s privacy with curtain, screen, or door.5. Lower the head of bed so that it is flat. Lock bed wheels.6. Fold linens to the foot of the bed. Cover resident with a blanket.7. Move the resident to the side of the bed. Have your co-workers help you do this. Refer to the procedure Moving a resident to the side of the bed earlier in this chapter.8. Place stretcher solidly against the bed, and lock stretcher wheels. Bed height should be equal to or slightly above the height of the stretcher. Move stretcher safety belts out of the way.9. Two workers should be on one side of the bed opposite the stretcher. Two more workers should be on the other side

of the stretcher.10. Each worker should roll up the sides of the draw sheet and prepare to move the resident. Protect the resident’s arms and legs during the transfer.11. On the count of three, the workers lift and move the resident to the stretcher. All should move at once. Make sure the resident is centered on the stretcher.12. Place a pillow under the resident’s head. Make sure resident is still covered with the blanket.13. Place the safety straps across the resident. Raise side rails on stretcher.14. Unlock stretcher’s wheels. Move resident to proper place, staying with him until another staff member takes over. 15. Wash your hands.16. Report any changes in resident to the nurse. Document procedure using facility guidelines.

To return the resident to bed, the bed height should be equal to or slightly below the stretcher.

TRANSFERRING A RESIDENT USING A MECHANICAL LIFT The following is a basic procedure for transferring using a mechanical lift. Ask someone to help you before starting.1. Identify yourself by name. Identify the resident by name. 2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.4. Provide for the resident’s privacy with curtain, screen, or door.5. Lock bed wheels.6. Position wheelchair next to bed. Lock brakes.7. Help the resident turn to one side of the bed. Position the sling under the resident, with the edge next to the resident’s back, fanfolding if necessary. Adjust the bottom of the sling so that it is even with the resident’s knees. Help the resident roll back to the middle of the bed, and then spread out the fanfolded edge of the sling.

Continued on next slide

TRANSFERRING A RESIDENT USING A MECHANICAL LIFT (CONTINUED)8. Roll the mechanical lift to bedside. Make sure the base is opened to its widest point. Push the base of the lift

under the bed.9. Position the overhead bar directly over the resident.10. With the resident lying on his back, attach one set of straps to each side of the sling. Attach one set of straps to the overhead bar. If available, have a co-worker support the resident at the head, shoulders, and knees while being lifted. The resident’s arms should be folded across his chest. If the device has S hooks, they should face away from resident. Make sure all straps are connected properly and are smooth and straight.11. Following manufacturer’s instructions, raise the resident two inches above the bed. Pause a moment for

the resident to gain balance.12. If available, a lifting partner can help support and guide the resident’s body while you roll the lift so that the resident is positioned over the chair or wheelchair.13. Slowly lower the resident into the chair or wheelchair. Push down gently on the resident’s knees to help the

resident into a sitting, rather than reclining, position.14. Undo the straps from the overhead bar to the sling. Remove sling or leave in place for transfer back to bed.15. Be sure the resident is seated comfortably and correctly in the chair or wheelchair. Remove privacy measures.16. Place call light within resident’s reach.17. Wash your hands.18. Report any changes in resident to the nurse. Document procedure using facility guidelines.

TRANSFERRING A RESIDENT ONTO AND OFF OF A TOILET1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact

whenever possible. Make sure resident is wearing non-skid shoes.4. Provide for the resident’s privacy with curtain, screen, or door. 5. Position wheelchair at a right angle to the toilet to face the hand bar/wall rail. Place wheelchair on the

resident’s stronger side.6. Remove wheelchair footrests. Lock wheels.7. Put on gloves.8. Apply a transfer belt around the resident’s waist over clothing (not on bare skin). Grasp belt securely on both sides.9. Ask resident to push against the armrests of the wheelchair and stand, reaching for and grasping the hand bar. Move wheelchair out of the way.10. Ask resident to pivot her foot and back up so that she can feel the front of the toilet with the back of her legs.11. Help resident to pull down pants and underwear. You may need to keep one hand on the transfer belt

while helping to remove clothing.Continued on next slide

TRANSFERRING A RESIDENT ONTO AND OFF OF A TOILET (CONTINUED)12. Help resident slowly sit down onto the toilet. Ask resident to pull on the emergency cord if

she needs help. Remove and discard gloves. Wash your hands. Leave bathroom and close door.

13. When called, return and don clean gloves. Assist with perineal care as necessary (see Chapter 13). Ask her to stand and reach for the hand bar.14. Use toilet paper or disposable wipes to clean the resident. Make sure she is clean and dry

before pulling up clothing. Remove and discard gloves. 15. Help resident to the sink to wash hands. 16. Wash your hands. 17. Help resident back into wheelchair. Be sure the resident is seated comfortably and

correctly in the wheelchair. Replace footrests.18. Help resident to leave the bathroom. Make sure resident is comfortable. Remove privacy

measures.19. Place call light within resident’s reach.20. Wash your hands again.21. Report any changes in resident to the nurse. Document procedure using facility guidelines.

TRANSFERRING A RESIDENT INTO A VEHICLE1. Identify yourself by name. Identify the resident by name. 2. Wash your hands.3. Explain procedure to the resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Place wheelchair close to the vehicle at a 45-degree angle. Open the door on the resident’s stronger side.

5. Lock wheelchair.6. Ask the resident to push against the arm rests of the wheelchair and stand.7. Ask the resident to stand, grasp the vehicle, and pivot his foot so the side of the seat touches the back of the legs.

8. The resident should then sit in the seat and lift one leg, and then the other, into the vehicle.9. Carefully position the resident comfortably in the vehicle. Help fasten seat belt.10. Safely shut the door.11. Return the wheelchair to the appropriate place for cleaning. 12. Wash your hands.13. Document procedure using facility guidelines.

AMBULATING RESIDENTS

Ambulation

Ambulatory

ASSISTING A RESIDENT TO AMBULATE1. Identify yourself by name. Identify the resident by name.2. Wash your hands.3. Explain procedure to resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Provide for resident’s privacy with curtain, screen, or door.5. Adjust bed to lowest position so that the feet are flat on the floor. Lock bed wheels.

6. Before ambulating, put non-skid footwear on the resident and securely fasten.7. Stand in front of the resident, facing the resident, with your feet about shoulder-width apart.

8. Place gait belt around resident’s waist over clothing (not on bare skin). Grasp belt securely on both sides. 9. Always allow resident to do whatever he is able to do for himself. If the resident is unable to stand without help, brace (support) the resident’s lower extremities. Bend your knees. If the resident has a weak knee, brace it against your knee.

Continued on next slide

ASSISTING A RESIDENT TO AMBULATE (CONTINUED) 10. Hold the resident close to your center of gravity. Provide instructions to allow resident to help with standing. Tell the resident to lean forward, push down on the bed with his hands, and stand on the count of three. On three, with hands still grasping the gait belt on both sides and moving upward, slowly help resident to stand.

11. Walk slightly behind and to one side of resident for the full ordered distance, while holding onto the gait belt. If the resident has a weaker side, stand on the weaker side. Use the hand that is not holding the belt to offer support on the weak side. Ask resident to look forward, not down at the floor, during ambulation.12. Observe the resident’s strength while you walk together. Provide a chair if the resident

becomes dizzy or tired.13. After ambulation, remove gait belt. Help resident to the bed or chair and check that the

resident is in proper alignment. Make resident comfortable. 14. Leave bed in lowest position. Remove privacy measures. 15. Place call light within resident’s reach.16. Wash your hands.17. Report any changes in resident to nurse. Document procedure using facility guidelines.

ASSISTIVE DEVICES

C cane

Functional grip cane

Quad cane

Walker

Guidelines for cane or walker use

ASSISTING WITH AMBULATION FOR A RESIDENT USING A CANE, WALKER, OR CRUTCHES1. Identify yourself by name. Identify resident by name.2. Wash your hands.3. Explain procedure to resident. Speak clearly, slowly, and directly. Maintain face-to-face contact whenever possible.

4. Provide for resident’s privacy with curtain, screen, or door.5. Adjust bed to lowest position so that the feet are flat on the floor. Lock bed wheels.6. Before ambulating, put non-skid footwear on the resident and securely fasten.7. Stand in front of the resident, facing the resident, with your feet about shoulder-width apart.

8. Place gait belt around resident’s waist over clothing (not on bare skin). Grasp belt securely on both sides. 9. If the resident is unable to stand without help, brace (support) the resident’s lower extremities. Bend your knees. If the resident has a weak knee, brace it against your knee. Help the resident to stand as described in the previous procedure.

Continued on next slide

ASSISTING WITH AMBULATION FOR A RESIDENT USING A CANE, WALKER, OR CRUTCHES (CONTINUED)10. Help as needed with ambulation.

a. Cane: Resident places cane about six inches, or a comfortable distance, in front of his stronger leg. He brings weaker leg even with cane. He then brings stronger leg forward slightly ahead of cane. Repeat.

b. Walker: Resident picks up or rolls the walker and places it about six inches, or a comfortable distance, in front of him. All four feet or wheels of the walker should be on the ground before resident steps forward to the walker. The walker should not be moved again until the resident has moved both feet forward and is in a steady position. The resident should never put his feet ahead of the walker.

c. Crutches: Resident should be fitted for crutches and taught to use them correctly by a physical therapist or nurse. The resident may use the crutches several different ways, depending on what his weakness is. No matter how they are used, weight should be on the hands and arms. Weight should not be on the underarm area.

11. Walk slightly behind and to one side of resident. Stay on the weaker side if resident has one. Hold the gait belt if one is used.

12. Watch for obstacles in the resident’s path. Ask resident to look forward, not down at the floor, during ambulation.

13. Encourage the resident to rest if he is tired. When a person is tired, it increases the chance of a fall. Let the resident set the pace. Discuss how far he plans to go based on the care plan.14. After ambulation, remove gait belt. Help resident to the bed or chair and check that the resident is in proper

alignment. Make resident comfortable. 15. Leave bed in lowest position. Remove privacy measures.16. Place call light within resident’s reach.17. Wash your hands.18. Report any changes in resident to nurse. Document procedure using facility guidelines.

REVIEW

Review the principles of body mechanics

Describe how to safely position residents

Describe how to safely transfer residents

Describe how to safely ambulate residents