chapter 2 lecture 1 mechanical vibration
TRANSCRIPT
![Page 1: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/1.jpg)
Chapter (2): Vibration of Single-degree of Freedom
Systems (SDOF)
2.1 Degree of Freedom
2.2 Differential Equations of Motion in Time Domain:
- Newton’s Law of Motion
- Energy Method
2.3 General Solution of Equation: Transient and Steady-
state Response
2.4 Frequency Response Method in Frequency Domain:
Impedance Method
2.5 Comparison of Rectilinear & Rotational Systems
![Page 2: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/2.jpg)
2.1 Degree of Freedom:
� The One-degree-of-freedom system is the keystone for
more advanced studies in vibration.
� The system is representation by a generalized model
shown below.
� Examples of one-degree-of-freedom systems are shown
in next figure. Though they differ in appearance, they can
be represented by the same generalized model.
� The model serves:
�To unify a class of problems commonly
encountered.
�To bring into focus the concept of vibration.
![Page 3: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/3.jpg)
Fig. Generalized Model of One-degree-
of-freedom Systems SDOF
![Page 4: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/4.jpg)
Fig. Examples of Systems with
One-degree-of-freedom SDOF
![Page 5: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/5.jpg)
Definition of Degree of Freedom:�The number of degrees of freedom of a vibratory system is the
number of independent spatial coordinates required to uniquely
define the configuration of a system.
�To every degree of freedom there is an independent spatial
coordinate.
�To every degree of freedom there is an equation of motion.
�To every degree of freedom there is a natural frequency.
�Number of natural frequencies equal number of degree of
freedom.
�A rigid body will have 6 DOF to describe its motion – 3
translation and 3 rotation. Such a System has here 6
natural frequencies and hence 6 independent coordinates
and 6 equations.
![Page 6: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/6.jpg)
Examples of Multi-degree-of-freedom Systems:
Fig. ? DOF Dynamic SystemFig. ? DOF Dynamic System
![Page 7: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/7.jpg)
Animated Motion of Multi-degree-of-freedom
Systems
Fig. Generalized Model
of ? DOF
Fig. Generalized Model
of ? DOF
![Page 8: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/8.jpg)
Quarter Car Model:
Fig. Generalized Model
of ?DOF
![Page 9: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/9.jpg)
Human Body Dynamic Model:
Fig. Generalized Model
of ? DOF
![Page 10: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/10.jpg)
2.2 Differential Equations of Motion in Time
Domain:
� The equation of motion of a dynamic system can be
written using the following methods:
�Force Method using Newton’s Law of Motion (Time
Domain)
�Energy Method using Kinetic & Potential Energies
(Time Domain)
�Frequency Response Methods (Frequency Domain)
�Equation of Motion using Laplace transform (Frequency
Domain)
�At first we consider the equations of motion of dynamic
systems in time domain.
![Page 11: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/11.jpg)
Types of Vibratory Motions for SDOF Systems:
Fig. (a) Undamped Free
Vibration (b) Damped Free
Vibration and (c) Forced
Damped Motions
![Page 12: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/12.jpg)
2.2.1 Equation of Motion - Newton’s Law of
Motion/Force Method:� This method states simply that the inertia force on a
dynamic system is equal to the sum of all forces and/or
moments acting on that system. In general we can write
��� = ������� ������������� ����� �.
���� = ������� ��������������� ����� � .
� To simplify solution, we can neglect in this analysis all the
forces and moments from Statics and keeping only the
dynamic ones.
� Following examples take into account these above
principles.
![Page 13: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/13.jpg)
Example 1: Spring-mass System
� To derive equation of motion using
Newton’s Law of Motion.
� The inertia force is equal to sum of all
forces,
�+↓ ���= ������� ������������� ����� �
��� = �� − �( !" + �).�Neglecting forces from Statics, then
��� = −��,Or ��� + �� = 0, Differential Eq. of Motion.
� Rewriting �� + %& � = 0, where '() = %
& is the natural
frequency in (radians/s)²
![Page 14: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/14.jpg)
Example 2: Simple Pendulum
� To derive equation of motion using
Newton’s Law of Motion.
� The inertia moment is equal to sum of all
moments acting on the system.
�+* ����= ������� ��������������� ����� ����� = −��+����.
� Since vibration is very small, then ���� , �,���� = −��+�-
Or ���� + ��+� = 0- Differential Eq. of Motion.
� �� + &./&/0 � =, where '() = .
/ is the natural frequency in (radians/s)².
![Page 15: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/15.jpg)
Example 3: Torsional Pendulum
� The inertia moment is equal to sum
of all moments acting on the system.
�+1 ���� = ������� �������� = −�"�2 �" = 345 +6 .
� Since vibration is very small, then
���� , �,���� = −�"�.
Or ���� + �"� = 0- Differential Eq. of Motion.
� Rewriting �� + %789 � = �� + %7
:;0
0 � = 0, where '() = %7:;0
0 is
the natural frequency in (radians/s)².
![Page 16: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/16.jpg)
Assignment 1
1. Calculate the natural frequency
<( using Force Method.
2. A motor weighing 150 kg is supported
by 4 springs, each having a stiffness of
1000 N/m. Determine the speed in
rpm at which resonance will occur.
3. Calculate the natural frequency <( of the
above system if �=10kg, �=10000 N/m and mass of pulley is 15 kg with radius 0.30 m.
![Page 17: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/17.jpg)
� The equation of motion of a conservative system can be
established from energy conservations.
� The total mechanical energy in a conservative mechanical
system is the sum of the kinetic energy T and the potential
energy U.
� The kinetic energy T is due to the velocity of the mass.
� The potential energy U is due to the strain energy of the
spring by virtue of its deformation.
� For a conservative system, the total mechanical energy is
constant and its time derivative is zero.
Total Mechanical Energy= = + > = ?������. @@" = + > = 0.
2.2.2 Equation of Motion - Energy Method:
![Page 18: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/18.jpg)
Fig. Potential Energy due to
Deformation of a Spring
![Page 19: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/19.jpg)
Example 1: Mass-spring System
� To derive equation of motion using Energy Method.
�The displacement �(�) of the mass � is measured from its static equilibrium position.
�Let �(�) be positive in the downward direction.�The spring is massless.
� The kinetic energy of the system is = = A)��)B .
� The net potential energy of the entire system is the
algebraic sum of the strain energy of the spring and the
that due to the change in elevation of the mass and is >= C �� + �� D�� − ���E
F = > = A) ��).
![Page 20: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/20.jpg)
� Total Mechanical Energy == + > = A)��B) + A
) ��)= ?������.� Therefore,
@@"
A)��B) + A
) ��) = 0 = ��� + �� �B = 0� �B(�) can not be equal to zero for all values of time �, then
��� + �� = 0.�Above is called Differential Equation of Motion of free
undpamed system and by rewriting:
�� + %& � = 0-
where '() = %& is the natural frequency of the system in
(radians/s)².
![Page 21: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/21.jpg)
Example 2: Simple Pendulum
� To derive equation of motion using
Energy Method.
�The displacement �(�) of the mass �is measured from its static equilibrium
position.
�Let �(�) be positive to the right direction.
�The cord is massless.
� The kinetic energy of the system is = = A) ���)B .
� The net potential energy of the entire system is due to
the change in elevation of the mass and is > = ��(+− + GHI J).
![Page 22: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/22.jpg)
� Total Mechanical Energy == + > = A) ���)B + ��(+
− + GHI J) = ?.� Therefore,
@@" (
A) ���)B + �� + − + GHI J) = 0.
� �B �(���)� + ��+����) = 0- since vibration is very small and
�B(�) can not be equal to zero for all values of time �, then���)� + ��+� = 0.�
�Above is called Differential Equation of Motion of free
undamped system and by rewriting:
�)� + &./89 � = 0.
where '() = &./&/² =
./ is called the natural frequency in
(radians/s)².
![Page 23: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/23.jpg)
Example 3: A Cantilever Beam
� To derive equation of motion using Energy Method.
� The kinetic energy of the system is = = A)��)B .
� The potential energy of the entire system is the strain
energy of the spring and is > = A) ��).
Fig. Original Dynamic
System
Fig. Equivalent Dynamic
System
![Page 24: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/24.jpg)
� Total Mechanical Energy= = + > = A)��B) + A
) ��) = ?� Therefore,
@@"
A)��B) + A
) ��) = 0 = ��� + �� �B= 0.
� �B(�) can not be equal to zero for all values of time �, then��� + �� = 0
�Above is called differential Equation of Motion of free
undamped system and by rewriting:
�� + %& � = 0-
where '() = %& is the natural frequency of the system in
(radians/s)².
![Page 25: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/25.jpg)
Consideration of Equivalent Mass of a Spring:
� Consider again example 1. Let Lbe the mass of spring per unit
length and�+� length of the spring when the mass is at static
equilibrium position .
Example 4: A Simple Mass-spring
System
� Using Energy method, the kinetic energy is due to the
rigid mass ��and the spring �. � Consider an element DM at a distance M. By giving a displacement � � to the mass, the displacement at this
element is N/ � � . Thus, � � defines the system
configuration and the total kinetic energy is
![Page 26: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/26.jpg)
�= = A)��B ) + A
)C L/F (N/ �B � ))DM = A)��B ) + A
O L+�B � ).
� The total potential energy is > = A) ��).
� The first derivative of the total mechanical system is zero.
Hence, Total Mechanical Energy= = + > = ? and
@@" (
A)��B ) + A
O L+�B � ) + A) ��)) = 0.
�B can not be zero for all values of time, Hence,��� + P/Q ��
+ �� = 0.� Rewriting above eq. yields � + P/
Q �� + �� = 0, or �� + %
&RSTU
� = 0 and the nat. frequency becomes
'() = %&RST
U.
![Page 27: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/27.jpg)
Springs in Parallel:
- Determine the spring constant �VWfor equivalent spring
- Apply the approximate relations
for the harmonic motion of a
spring-mass system.
• '( = %XY& = AFZ
)F = 22. 36
rad/s.
Springs can be arranged as shown
below, either in parallel or series.
For each spring arrangement,
determine the spring constant
�VW for a single equivalent spring.
Springs in Arrangements in Parallel or Series:
[ = �A + �) δ�VW = [
δ = �A + �)=10 kN/m=10^ N/m
Fig. Springs in Parallel and Series
Connections with � = 20 kg
Calculation of Equivalent
Spring Stiffness `ab
![Page 28: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/28.jpg)
- Determine the spring constant
�VW for equivalent spring.
- Apply the approximate relations
for the harmonic motion of a
spring-mass system.
Springs in Series:
VW = A + )-�where�� = ghg
%XY =g%i +
g%0=
A%i +
A%0
A%XY = A
^FFF+A
OFFF�VW=�2400�N/m.
Fig. Springs in Series Connections
with � = 20 kg
Calculation of Equivalent Spring
Stiffness `ab
• '( = %XY& = )^FF
)F= 10.95 rad/s.
• p = )qr = 0.574 s.
![Page 29: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/29.jpg)
Equivalent Inertia Mass �VW:� The equivalent mass �VW of a vibration system may be
better explained with the help of the following Fig.3.1.
�Mass �VW is obtained using the kinetic energy = of the
system as illustrated below, Fig.3.1b.
�Assuming the spring to be of negligible mass, then,
Fig.3.1a Vibration System in
Rotation
Fig.3.1b Equivalent Spring
-mass System
![Page 30: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/30.jpg)
= = A) ���)B =
A)�VW�)B ,
where �� = �t. +�(/^))= �+) AA) +
AAO = u
^v�+) andsubstituting �B = Q
^ +�B , then �VW = u)u�.
![Page 31: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/31.jpg)
Equivalent Mass Moment of Inertia �VW� The equivalent mass moment of inertia �VW may be obtained
using the pinion-and-gear assembly, Fig.3.2.
� To find the �VW of the assembly referring to the motor shaft
1.
� The speed ratio between the motor shaft 1 and shaft 2 is
given by � = wA/w). Let �A and �) be the angular rotations of the pinion �A and the gear �) respectively.
Fig.3.2 Equivalent Mass Moment of Inertia
![Page 32: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/32.jpg)
� The kinetic energy = of the assembly referred to the motor shaft 1 is
= = A) �A�BA) +
A) �)�B)) =
A) �VW�BA)
and substituting �B) = ��BA in above eq. of =, then�VW = �A + �)�)
�Hence the equivalent mass moment of inertia of �) referring to motor shaft 1 is �)�).
![Page 33: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/33.jpg)
Effects of Orientation:� Consider the three figures and write down their equations of motion respectively.
� Eq. (a) and (c) are affected by gravity while (b) is not.
� In eq.(a) the natural frequency is increased, in (b) remains the same and in (c) is decreased.
![Page 34: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/34.jpg)
Assignment 2
k
1. Calculate the natural frequency <(using Energy Method.
2. Calculate the natural
frequency <( using Energy Method.
3. Calculate the natural
frequency <( using Energy Method.
![Page 35: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/35.jpg)
2.3 General Solution of Equation:
� The eq. of motion using Force
Method can be written as:
��� = ������� �.� Referring to the FBD, the forces
acting on the mass ��are: 1. Gravitational force ��,2. The spring force � � + !" , Fig. Model of Systems
with 1 DOF3. The damping force ��B and 4. The excitation force x���'�.
�Using Force Method and the attached figure, we can
write as follows:
![Page 36: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/36.jpg)
∴ � @0@"0 � + !" = −� � + !" − � @
@" � + !" +��+ x���'�, Or ��� + ��B + �� = x���'�. Eq.2.1
General Solution:
� The general solution �(�) of Eq.2.1 is the sum of the
complementary function �t(�) and the particular integral �5(�), i.e.
� � = �t(�)+ �5(�) Eq.2.2
![Page 37: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/37.jpg)
2.3.1 Complementary Function (Transient Response)
� This function satisfies the corresponding homogeneous
equation:
��� + ��B + �� = 0. Eq.2.3
� The solution is of the form �t � = � !", Eq.2.4
where � and � are constants. Substituting Eq.2.4 into Eq.2.3 gives ��) + �� + � � !" = 0.
� Since the constant � !"can not be equal to zero, then we deduce that ��) + �� + � = 0.
� This is called the auxiliary equation whose roots are:
�A-) = A)& (−� ± �) − 4��). Eq.2.5
![Page 38: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/38.jpg)
� Since there are two roots, the complementary function is
�t = �A !i" + �) !0", Eq.2.6
where �A and �) are arbitrary constants to be evaluated using initial conditions.
� To write above eq. in a more convenient form, one uses
%& = '(),
t& = 2ξ'( or ξ = t
) %&, Eq.2.7
where '( is the natural frequency and ξ is the damping factor.
�Above equation can be rewritten as
�� + 2|'(�B + '()� = 0 Eq.2.8
�) + 2|'(� + '() = 0 Eq.2.9
![Page 39: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/39.jpg)
�A-) = −|'( ± |) − 1'(. Eq.2.10
� Referring to Eq.2.10, value�Hf�|�in� |) − 1 may lead to
the following cases:
� Case 1: If | > 1, Eq.2.10 will have real, distinct and negative roots, |) − 1 < |.
�t = �A �5i" + �) �50" . Eq.2.11
� Thus, no oscillation is expected from Eq.2.11.
� Since both the roots are negative, the motion diminishes
with increasing time and it is aperiodic.
![Page 40: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/40.jpg)
� Case 2: If | = 1, Eq.2.10 shows that both the roots are equal to −'(. Thus, the complementary function is of the
form: �t = (�Q + �^�) �r�", Eq.2.12
where �Q and �^ are constants. The motion is again
aperiodic and will diminish to zero as time increases. No
motion is expected.
� Case 3: If now | < 1, the roots in Eq.210 become complex conjugate and are of the form
�A-) = −|'( ± � 1 − |)'(- Eq.2.13
where � = −1, Define now '@ = 1 − |)'(.�Using Euler’s Formula ±�� = ��� ± �����, the complementary function �t in Eq.2.6 becomes:
![Page 41: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/41.jpg)
�t = �� !i" + �O !0" = ��r�" �� �r�" + �O ��r�" -or �t = ��r�"( �� + �O ��'@� + � �� − �O ���'@�).
Eq.2.14
� Since �t is a real physical quantity, the coefficients �� + �Oand � �� − �O in Eq.2.14 must also be real. This requires that��� and �O be complex conjugates. Hence Eq.2.14 becomes
�t = ��r�"(�u��'@� + �v���'@�), Eq.2.15
�t = � ��r�" Iin '@� + � , Eq.2.16
where �u and �v are real constants to be evaluated by the initial
conditions, �= �u) + �v) and � = tan�A( �u �v)6 .
� The motion described by Eq.2.16 is a harmonic function decreases as time increases.
![Page 42: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/42.jpg)
| > 1 – Over damped Eq.2.11, | = 1 – Critically damped Eq.2.12,
| < 1- Under damped Eq.2.16
Fig. Complementary Functions �t of SDOF Under Different Damping Factors
![Page 43: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/43.jpg)
�Note that
� �t(�) is vibratory only if the system is underdamped, |< 1.
� The frequency of oscillation '@ is less than the natural
frequency '(.� In all cases, �t(�) will eventually die out regardless of the initial conditions. Hence complementary function
gives transient response.
� The critical damping �t is the amount of damping
necessary for a system to be critically damped, i.e. | = 1. From Eq.2.7, this value amounts
�t = 2 ��. Eq.2.17
�Damping factor | can be defined as | = tt� Eq.2.18
![Page 44: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/44.jpg)
�A machine of 20 kg mass is mounted on springs
and dampers. The total stiffness of springs is 8
kN/m and the total damping is 130 N.s/m. If
the system is initially at rest and a velocity of 100
mm/s is imparted to the mass, determine:
a. The displacement and velocity of mass as a
time function
b. The displacement at � = 1.0 s.
Example 1: Free Damped Vibrations
� Solution:
The displacement �t(�) is obtained by the direct application of Eq.2.16. The parameters of the equation are:
'( = % &6 = vFFF )F6 = 20 rad/s, ξ = t) %& = AQF
) vFFF�)F= 0.1�25 and '@ = 1 − 0.1�25) � 20 = 19.7 rad/s.
![Page 45: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/45.jpg)
a. Substituting these values into Eq.2.16, we obtain
�t = �Q.)�"(�A��19.7� + �)���19.7�) and�Bt = −3.25 �Q.)�" �A��19.7� + �)���19.7� +
19.7 �Q.)�"(−�A���19.7� + �)��19.7�)Applying the initial conditions gives � = 0- � 0 = 0 ,
→ �A = 0 and
� = 0- �B 0 = 100, → �) = AFF A�.u6 = 5.07 mm
�t = 5.07 �Q.)�"���19.7� mm and
�Bt = �Q.)�" −1�.47���19.7� + 100��19.7�= 101.3 �Q.)�"�� 19.7� + 9.5° mm/s.
b. The displacement at � = 1.0 s is �t= 5.07 �Q.)��A.F���19.7 � 1.0 = 0.1477�mm.
![Page 46: Chapter 2 lecture 1 mechanical vibration](https://reader034.vdocuments.net/reader034/viewer/2022042500/58f9ad151a28ab776b8b459d/html5/thumbnails/46.jpg)
� Plot the harmonic motions of displacement �t and velocity �Bt developed by the solutions (a) respectively in example 1 for at least three consecutive cycles. Use
for this purpose size A4 graph papers only.
Assignment 3