chapter 7 cargo containers equipment …€¦ · he jmic will orklift portab from tm r inter ner...
TRANSCRIPT
TM 12359A-OD/C
7-1/(7-2 Blank)
CHAPTER 7
CARGO CONTAINERS
EQUIPMENT DESCRIPTION SHEETS
THIS PAGE INTENTIONALLY LEFT BLANK
J
Functio Joint Mocontainersupplies common equivalen(AIT) enaunits on pTEU with Technic
Unit ManufactModel: Power Re NOTE: T Alternate Replaced Transpo
JOINT M
onal Descr
odular Intermr and platformthrough the dtransportatio
nt unit (TEU) abled warehoplatforms that
h minimal bloc
cal Descrip
turer:
eq.
The maximum
e Models NN
d Items T
rtability F
EXTRACT
ODULA
ription
modal Contaim with integratdistribution syn platforms. loads or otheuse pallet-sizt can be rapidcking and bra
ption
Garrett ConType
m weight load
NSN: 8145-0NSN: 8145-0
The JMIC will
Forklift portab
T FROM TM
AR INTER
ner (JMIC) - Ated asset tracstem to includJMICs are us
er commonly uzed loads. JMdly transitionecing.
tainer System1 – Silver col
N/
ed is 3000lbs
1-588-1825, 1-588-1830,
be an additio
le
M 12359A –O
RMODA
TAM
ID: 1
NSN
A standardizecking to permde retrogradesed to effectivused platform
MICs can be tred between m
Dim
ms Lenor Wid
Heig/A Wei
Volu Cap Inte Inte Inte
s
Green Tan
on to / or repla
OD/C DATE
L CONT
MCN: C0
11623C
N: 8145-0
ed collapsibleit the efficient
e operations. vely build and
ms into Automaransported as
modes. Sixtee
mensions gth (in):
dth (in): ght (in): ight (lb): ume (ft3):
pacityerior Width (inerior Depth (inerior Height (in
acement for t
TM
ED 2011
TAINER (
0077
01-588-
e intermodal st and seamlesJMIC is com
d break down ated Identificas single units en (16) JMICS
): n): n):
he PALCON
M 12359A-O
(JMIC)
1810
shipping cargoss movementpatible with twenty-foot ation Technoor as multiple
S will fit into a
44 52 43
327 56.9
48.75 40.75 33.18
OD/C
7-3
o t of
logy e
a
TM 12359A-OD/C
EXTRACT FROM TM 12359A –OD/C DATED 2011 7-4
PALLET CONTAINER (PALCON)
TAMCN: C4431
ID: 08954B
NSN: 8115-01-371-3690
Functional Description The PALCON is a lockable, weatherproof, fiberglass container. Entry is through double doors on one 40 inch side. It contains integral fittings for lifting and restraint, built in handles for hand carrying and positioning while empty, and a pallet base with four-way tineways allowing convenient storage in amphibious ships. In the optional (A/R) storage bin configuration, the PALCON accommodates six inserts or 12 half-length size inserts, which are guided and supported by a pallet container rack. The PALCON is stackable to three high at maximum gross weight.
Technical Description Unit Dimensions Manufacturer: Plastics Research Corp Length (in): 48 Model: 102440 Width (in): 40 Height (in): 41 Power Req. N/A Weight (lb): 120 Volume (ft
3): 45.5
Capacity Square (ft
2): 13.3
Cube (ft3): 46.5
Stowage (ft3): 46.5
Alternate Models N/A Replaced Items The PALCON will replace existing wooden boxes made by PP&P which are used
to stow and transport organizational property and consumable supplies.
Transportability The system shall be transportable by highway (truck), rail, sealift, landing craft airlift, and helicopter lift modes as specified in MIL-STD-1366C. Lifting and tie down provisions shall be as specified in MIL-STD-209H. The systems shall withstand a rail impact test, as specified in MIL-STD-810E.
NOTE: Maximum weight loaded is 1200lbs
TM 12359A-OD/C
EXTRACT FROM TM 12359A –OD/C DATED 2011 7-5/(7-6 Blank)
QUADRUPLE CONTAINER (QUADCON)
TAMCN: C4433
ID: 08955C
NSN: 8115-01-474-7089
Functional Description The QUADCON is an ISO certified steel container. Entry is through double doors on both ends. It has four-way tine ways for forklift transport. In the optional (A/R) storage bin configuration, the QUADCON system accommodates 30 inserts or 60 half inserts which are guided and supported by a QUADCON rack. It can also accommodate the Small Items Storage Container (SISC). The QUADCON system has ISO corner fittings to facilitate handling, restraint, and coupling with the connector to form arrays of two (pair) or four (quad).
Technical Description
Unit Dimensions
Manufacturer: (1) CMCI Length (in): 57 (2) SeaBox Width (in): 96 Height (in): 80 Model: (1) CMCI115A Weight (lbs): 1,764 (2) SB812M Power Req. N/A Capacity Square (ft
2): 38
Cube (ft3): 260
Stowage (ft3): 260
NOTE: Maximum weight loaded is 11,200lbs. Alternate Models (2) NSN: 8145-01-556-1313 TAMCN: C4433 ID: 11484A Replaced Items The QUADCON will replace existing wooden boxes. These boxes are used to
stow and transport organizational property and consumable supplies.
Transportability The system has undergone transportability requirements as defined in MIL-STD-1366D for helicopter lift modes, MIL-STD-209J for lifting and tie down provisions, and MIL-STD-810E notice 3 for rail impact tests.
THIS PAGE INTENTIONALLY LEFT BLA0NK