88 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.88 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

STORE STOCKED

1/2" Drive Axle Nut Sockets 30 mm SKU 079988 | 25203 1499 32 mm SKU 552315 | 25204 149933 mm SKU 864643 | 25152 149934 mm SKU 010252 | 25205 149935 mm SKU 864642 | 25153 189936 mm SKU 079772 | 25206 19 99• Removes and Installs the Front

Drive Hub/Axle Nuts on 4-Wheel Drive and Many Front Wheel Drive Automobiles

9 Piece 6 Pt. Axle Nut Socket SetSKU 900822 119 9927188 • Includes Sizes: 27, 29, 30, 32,

33, 34, 35, 36 and 38 mm• Chrome Moly Sockets are

Impact Rated• Black Oxide Finish to Resist Rust• Comes in a Blow Mold Case

8 Piece 12 Pt. Axle Nut Socket SetSKU 751696 89 9924480

Pitman Arm and Ball Joint Front End Service KitSKU 900820 119 9927181• Services Pitman Arm, Tie Rod and Ball Joints• Includes: Pitman Arm/Tie Rod End Puller, Ball

Joint Separator, Pitman Arm Puller, Ball Joint/Tie Rod End Remover

• Comes in a Sturdy Blow Mold Case

23 Piece Hub Bearing Remover and Installer KitSKU 094804 199 99 27205• Removes and Installs

Wheel Bearings with Steering Knuckle and Strut Assembly Still on the Vehicle, Eliminates Need for Alignment

Master Wheel Hub and Bearing Remover and Installer KitSKU 298230 39999 27213 Reg. $499.99 • For Removal and Installation of Front

Wheel Hub and Bearings on Asian, Domestic and German Vehicles Along with Rear Wheel Hubs and Bearings on European Vehicles

• Works on Front, Rear and All-Wheel Drive Vehicles

• Self Centering Design is Incredibly Durable and Easy to Use

• Broader Application with Fewer Components Than Many Other Tools

10 Piece Master Spring Compressor Strut/Coil Spring Compressor KitSKU 094802 99 9927203 • Used to Compress Most Sizes of

MacPherson Springs and Coil Springs• Heat-treated for Toughness• Comes in a Blow Mold Case

Coil Spring CompressorSKU 110364337035

39 99• Used to Safely Compress the Coil

Spring on Most Cars and Light Trucks • Can also be Used when Installing Coil

Spring Spacers

StrutTamer™ II Extreme with StandSKU OUTSIDE BUY/EPO1,09999OTC6637-ST• Meets the New ASME PASE

Standards for Spring Compressors• Capable of Safely Compressing

the Largest Strut Springs• New Forged Locking Jaws

Include Larger Pads and Offset to Clamp onto and Compress Springs Even Tighter Than Before

• Unique Trunnion Locking Mechanism to Eliminate Arm Movement for Stable Compression

STORE STOCKED

Inner Tie Rod Tool SKU 291414 9499LIS45750

• Includes Sizes: 29, 30, 32, 34, 35, 36, 38 and 39 mm

• Chrome Vanadium Sockets are Impact Rated

• Black Oxide Finish to Resist Rust

• Comes in a Blow Mold Case

Tie Rod Tools Hub Bearing

Pitman Arm Puller

12 Pt. Axle Nut Socket 1/2" Drive29 mm SKU OSB | 33627322 1499 30 mm SKU 191051 | 25157 1499 31 mm SKU OSB | 33627324 14 99 32 mm SKU OSB | 33627325 1599 33 mm SKU OSB | 33627326 1599 34 mm SKU OSB | 33627327 16 99 35 mm SKU OSB | 33627328 17 99 36 mm SKU OSB | 33627329 17 99 38 mm SKU OSB | 33627330 17 99 39 mm SKU OSB | 33627331 18 99

STORE STOCKED

Model 7600 Strut Spring CompressorSKU 547959 949 99BRA7600• Handles the Toughest Applications• Min./Max. Spring Diameters:

3.5"/11.5"• No Adapters

Required

Cart for BRA7600SKU 547960 419 99 BRA00-0137Bench Mount for BRA7600SKU 547962 59 99BRA05-0125

OEM Approved by Major

Automakers

CV Axle Nut Sockets

Inner Tie Rod ToolSKU 094645 19 9925296• Use to Easily Turn Tie Rods• Use with an Extension, Tighten Nuts on U-Bolt as Needed• Tool Can Remove Inner Tie Rod without Removing Outer Tie Rod

Inner Tie Rod Tool KitSKU 217377 49 9927185 • Removes and Installs Tie Rod End

on Rack and Pinion Steering• Includes: 1-3/16", 1-5/16"

and 1-7/16"

MacPherson Strut Spring CompressorSKU 070135 349925550• Used to Compress

Strut Spring During Cartridge Replacement

• Forged Hook • Heat-treated

Forcing Screw • Safety Latches

GM Upper Control Arm Knock Out Tool SKU 420336 24 9924210• Services Chevrolet and GMC 1/2,

3/4 and 1 Ton, 2 and 4 Wheel Drive Trucks (1989-2001) and All Wheel Drive Chevrolet Astro and GMC Safari Vans (1990-2002)

Tomcat Air-Assisted Multiple Camber Adjustment ToolSKU 360484 229 99DOWTC614

Suspension

Volvo Shock Retaining Nut Strut Removal Socket ToolSKU 300125 249924365• Includes Holding Socket with

“Double D” Axle Center Socket• Fits Several Volvo Models

(1999-2010)

Universal Shock Absorber Tool SKU 036202 249925038• For Removing and Installing

Shock Nuts• Fits Many Shock Stems

Shock Tools

Master Inner Tie Rod ToolSKU 080557 129 99LIS46800• Works on Inner Tie Rods with

Inaccessible Wrench Flats• Includes 9 Crowfoot Style

Adapters to Work on Various Applications • Long Socket Slips Over the Tie Rod End and the Crowfoot Engages on

the Socket for Easy Removal and Installation

Master Inner Tie Rod Tool SetSKU 344979 129 9927178 Works on Both Small Cars and SUVs • Tube Handle Has an Inner Diameter

of 2.125" to Service Small Cars, Pickups and Large SUVs

• Includes 12 Crowfoot Style Adapters, Sizes: 29 mm, 1-3/16", 1-1/4", 32.5 mm, 1-5/16", 33.6 mm, 1-3/8", 1-7/16", 1-1/2", 38.4 mm, 40 mm and 42 mm

• Comes in a Blow Mold Case

OTC Hub Grappler™ Wheel Bearing PullerSKU 096847 55999OTC6575• Complete Solution for Servicing Wheel Hubs and Bearings on the

Vehicle without Removing the Steering Components or Knuckle - Eliminates Unnecessary Alignments or the Use of a Shop Press

• Applies Maximum Force with Minimal Effort from an Impact Gun

1Spring Compressors

Hydraulic Ball Joint Separator SKU OUTSIDE BUY/EPO 25219

VDP ORDERS ONLYOffer Good Through March 31, 2021Offer Good Through March 31, 2021

BONUSVALUE: $59.99

With Purchase of: 27213

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions Color May Vary

STORE STOCKED

Seal PullerSKU 048199 12 9925014• 2 Tips Fit All

Seal Sizes

Transmission/ Transaxle PlugsSKU 298196 19 9924490• Includes 5 Plugs to Seal Both Transmissions

and Transaxles on Most Import and Domestic Vehicles

• Stepped Design for Retention and Positive Sealing

• Includes Side Gear Centering Pin for Ford Transaxles

Seal Tools

Color May Vary

Bearing Race and Seal Master Driver Set SKU 1103639 49 9937119 • Installs Most Standard Wheel

Bearings and Races• Includes Driver

Sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", 3.180" and Handle

SAVE$100

Torsion Bar Tool

GM, Ford, Chrysler Torsion Bar ToolSKU 1103600 69 9937278 • Safely Loads and Unloads 5-Lug, 6-Lug and 8-Lug GM, Dodge and

Ford Torsion Bar Suspensions for Key Replacement• Extended Long Reach "C-Clamp" for use with 2011 and Higher GM

Heavy Duty trucks• Includes Ford/Dodge

Adapter

• 6 Sizes: 1-3/16", 1-1/4", 1-5/16", 1-7/16", 1-1/2" and 33.6 mm

NEW

NEW

NEW

Color May Vary

CHASSIS & SUSPENSION

89Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.PPPrPrPPPPPrPPrPPrPrPrPrPrPPrPrPrPPrPrPrPPPPPPrPPrPrriciciiciiiciccicicicciciciciciiiicicicccesesseesseseeeeseseseseseseesesseseeesssessssee ssssssssssssssssssssssssss bububbbbbubububuubububububububububbbbbbubuuububu jjejejejjjjejjjejejejjejeejejejejejejeeejeeejejejejeej ttctctctttcctctctctctctcttctccttctccctccctcct ttttttttttttttttttttttttooooooo oooooooooo o ooooooooooo chchchchhchcchhccchchchchhchhhchchchchhchhhhhanananannannnanaanananananaananananaanannanaaanaanana gegegegegegegegegegeegegegegeeeegegggegeegegegegegeegeg wwwwwwwwwwwwwwwwwwwwwwwwwwwwwititiititittitititititititititittittitititthohhohohohhohohhohohoohohhohoohohhooohhooho tttututttututututuutututututuutuuuut nnnnnnnnnnnnnnnnnnnnnnnnnotototottototootototototototototoototototiiiiciciiciciiccicicicciciciccicce.eeeeeee.ee.eeeee.eeeeeeee.eee.. PPPlPlPlPlPlPllPPlPlPlPlPlPlPlPlPlPlPlPlPPPlPlleaeaeaeaeaaeeaeaeaaeaeaeaaeaeaeaeeaeeeaeeaeeaeeaeaeaee seseseeseseseeseseseseeseseseseseseesesesesseseseseseeseese ddddddddddddddddddddddddddoooooooo oo oooo ooooooooooo nonononononononononononononononononononoononnoon ttttt tt t tttttttttttt rrrerrererrerererereererrereererrreeeeeeeeerretttuttututututuututututtutuututututututuutuuturnrrnnrrnrnnrnrnrnrrnrnrnrnrnrnrnrnrnrnrrnnrrnn ppppppppppppppppppppppppppppurruuurruruurururururrururururrururuururururuuu chhchhhchhchchchchchhchchchchchchchhchchchhchcchhchasasassasasassasasasasasaasasasasaasaasasasasaasassasa eseseseseseseeseeseeseseseseeeseeeseseseseeesesseesees tttttttttttttttttttttooo oooooooooo ooooooooooooo ththththtthththhthththththhtthhhhhhtthhththtthttheeeeee eeeee eeeee eeeeeeeeee sttsttstststtststststststsstssttsststtororoorororoorororoorororororororororrooooororooo eee.eee.e.eeeee.eeeeeeeeeee.ee FFFFFFFFFFFFFFFFFFFFFFororororororrororrrorooororororrrroroororroroooorr iiiiiiiiiiii fffnfnfnfnfnfnfnnfnffnfnfnfnfnfnfnffnfnfnfnfororoorororrorororororororororrrororoororrororrrrormammmamamamammamamamamamamamammammamamamammammamaaaaaatititttitttiittitititititittttititttititt onononononnnonononononnonononononononoononononoononnooo rrrrrrrrrrrrrrrrrrrrrrrregegegegegeegegeggegegegegegegegegegeggegegegegegegeggegggarararararaararaarararaaraaararaarararaaraaraaarddidididdidididdidiididididididddiddididdddidd ngnngngnggngngnggngnngngngnggngngngnggggnggnggngg wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwaraarraraaarararararararararararararararaarraaarrarraa raraarararararrararrararaarararaaaarraraaaaaaraa ttntntttnttntntntntntntnttntnnnnttntntnnty y y y y y yyyyyyyyyy y yy yy yyyyyy yy oororororororororoooororororororrorooorooo rrrrrrrrrrrrrrrrrrrrepepeepepeepepepepeepepeepepepepeppepepeeepepepepepepppppeeppe aiaiaiiiiiaiaiaiaiiaiaaaaiaaaiaiaaiaiaiair rrrr r rrrrr rr rrrrrrrrr anananananaanannanaanannannnaananannnaaaannanaana d/d/d/d/d/d/d/d/d/d//dd/d/d///d/dddddddddd/d//d/orororororororooroororooroororoororororoooorooo aaaaaaaaaaaaaaaaaaaaannnnnynynnynynynynnynynynynynynnynyynynynynyyyyy qqqqqqqqqqqqqqqqqqqqqqqqqqqqqueeueuueueeueueuueeueueueueueuueueueueueueeeueueuuu ststststtttstssttststtssstststtsttstststtststststttioiioioioiiioioiiooiiioioioooiiioioioonsnsnsnsnsnsnsnsnsnssnsnsnsnssnsnnnnsnsnsnsnnsss oooooooooooooooooooooooorrr r rrr rrr rrrrrr rrrrrrrrr cococococococococococococococococooocooooncncncncncncncncnncncncncncncccncncnncncnnceerererereereerreeerererereeererreererreee nsnssnsnsnsnsnnsnssnsnsnsnsnsnsnsnsssnsnsnssnss, , , ,,,, pplplplplpllplpplplplplplplplplppppppppplpppppppp eaeaeaeaeeaaaeaeeaeaeaeeaeaeaeaeaaeaeaeaeaeeaeaaaeeaseseseeseseseseseseeeseseseseseseseseseseesesseeseeseee ccccccccccccccccccccc lalllallaaaalalalaalalalalalaaalalaaaaaalallllll l l l l lll 1-1-1-1-1-1-1-1-1-1111111-1-11--1 8787878787878787787878787878788787878787787787877877777-7-7-7-7-7-7-7-77-7-777-777-77-777 AZAAZAZZAZAZAZAZAAZAZAAAZAZAZAZAZAZAZAZAZAZAZAZAZAAZAZZZAZZAZZAA TOTOTOOTOTOTOTOTOTOTOTOTOTOTOTOTOOTTOTTOOTTTOOT OLOLOOLOLLOLOLOOLOLLOLOOOLLOLOLOOLOLLOLOLOLOLOLOOL1.1.1.1.1.1.1.11.111.11.1111111Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

STORE STOCKED

Manual Bushing Installation and Removal Tool SetSKU 298214 299 99 27212 • Comprehensive Kit for Fast and Effective Removal/Installation

of Wheel Bearings/Suspension Bushings and Seals• Allows the Technician to Service a Wide Range of

Bushings without Removing Components from the Vehicle• Comes with 20 Sleeves for 100’s of Combinations• External Sleeve Diameter:

44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm

1/2" Drive Socket Bearing LocknutSKU 231203 199925243 • Fits Adjusting Nuts Found on Ford F150 Trucks (1995-1996)

and Full-Sized Broncos with Automatic Locking Hubs

Dodge Hub Locknut SocketSKU 344964 249925968• Fits Dodge 1/2-Ton Pickup Trucks

(1994-Newer) with Dana 44 Front Axle and Dana 60 Axle with a Vacuum Disconnect

• Designed to Accommodate the 1-11/16" (43 mm) Wheel Bearing Retaining Nut Which is Recessed into the Hub

Toyota 4 Pin Hub Locknut SocketSKU 298224 199925969• Services High-Torque Locknuts on

Toyota 4WD Vehicles Having Free-Wheel (Lock Out) Hubs

• Tacoma (1995-Newer); T100 and 4Runner (1996-Newer)

• Improved Design with Solid Pins for Increased Durability

5 Piece Tie Rod and Ball Joint SetSKU 094799 599927201• Used to Remove Tie Rods

and Ball Joints• Includes: 11" x 1-1/8",

11-5/8" x 1-7/16", 11-3/4" x 1-5/8", 16" x 11/16" and 16" x 15/16"

5 Piece Pickle Fork SetSKU 466511 499925261• Set Includes: Tie-Rod

Spreader with 11/16" Wedge Opening, Ball-Joint Separator with 15/16" Jaw Opening, Pitman Arm Wedge with 1-1/8" Opening, 8" Handle

Tie Rod End Puller SKU 004463 119925201• Tapered Fork Wedged Ends with

21/32" Opening• Overall Length: 11-7/8"

Ball Joint Separator SKU 004464 119925202• Tapered Fork Wedged Ends with

15/16" Opening

Ball/U-Joint Press with 4WD Adapter SetSKU 1103607 99 99 37089 • Used to Install and Remove Ball Joints on Most Cars and Light

Trucks with Press Fit Ball Joints• May Also Be Used to Remove and Install U-Joints on Most Cars

and Light Trucks

Spindle Nuts

Pickle Forks

1/2" Drive (12 mm) Ford Drive Line Impact SocketSKU 420319 19 9924212• Applications Include Many

Ford Drive Line Bolts• 12 mm, 12 Pt.

Drive Line Impact Socket

Bushing Tool

4WD 4 Lug Spindle SocketSKU 55226525072

1999

Hydraulic Ball Joint SeparatorSKU 177718 99 99 25219 • Hydraulic Ram Rated to 8 Tons• Jaw Capacity: 56 mm (2.25")• Jaw Width: 22 mm (0.86")

GM Axle Hub Nut SocketSKU 298219 299925967 • Applications: GMT900 Silverado, Sierra

HDCS, 2-Wheel and 4-Wheel Drive Cheyenne, Silverado, Escalade, Sierra and Avalanche Trucks with 10.5" or 11.5" Ring Gear

• Has 9 Pins to Fit GM New Style Retaining Nuts

• Unapproved Methods Can Damage the Bearing, or Result in Shorter Service Life

Stepped Pickle Fork Set SKU 291410 6499LIS41400• 6 Tools in One • Includes: 11/16",

15/16", 1-1/8"• Forks and

2 Handles

3/4" Drive Ball Joint Impact Socket 2-9/64"SKU 462494 2499 24215 • Used on Chrysler/Dodge Cars, Light Trucks and Vans

3/4" Drive Ball Joint Impact Socket 1-59/64" SKU 66280919 99 24238 • Used on Chrysler/Dodge Mid-Size Cars,

Light Trucks and Vans

STORE STOCKED

HYDRAULIC BALL JOINT SEPARATOR - FAST. SAFE. EFFICIENT.

Air Hammer with Chisel Set SKU 688276 | 80-364With Purchase of: 25219

BONUS VALUE: $34.99

3/8" Air Ratchet SKU OUTSIDE BUY/EPO 80-363

VDP ORDERS ONLY

Offer Good Through March 31, 2021

BONUS VALUE: $49.99

Offer Good Through March 31, 2021

VDP ORDERS

ONLY

With Purchase of: 27212

Ball Joint Tools

877-AZTool1, 877-298-6651Hablamos Español, AZtool1.com

Front Wheel Locknut WrenchSKU OUTSIDE BUY/EPO 39 99OTC7090A • For Use with 1973-1981

GM 3/4 and 1 Ton 4WD Trucks

Ball Joint SeparatorSKU OUTSIDE BUY/EPO 4499OTC6297• Used to Separate the Ball Joint

from the Spindle Support Arm• Works on Many Domestic and

Import Front Wheel Drive Vehicles• Adjustable Up to 2" for

Different Size Ball Joints

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

4WD Spindle Puller AttachmentSKU OUTSIDE BUY/EPO 449933627104• Use with OEMTOOLS® Slide Hammer

#27033 and #37033.• Works on 3/4" and 5/8" Quick

Connect Couplings Found on Ford and Chrysler Vehicles

• 5/8" x 18 Thread Size

Axle Tools

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

Universal Inner C.V. Joint PullerSKU OUTSIDE BUY/EPO 39 99OTC7507• CV Joint Fork Only

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

Flange Type Axle & Front Wheel Hub PullerSKU OUTSIDE BUY/EPO 39 99ATD3057• For Use on Domestic and Import

Cars and Light Trucks• Range is 3-3/4” to 4-1/2”• For Use on Four, Five, or Six Bolt Stud

Design and All Non-C Lock GM Axles• Can be Used with ATD-3045,

Heavy-Duty Puller Set

NEW

NEW

Case Color May Vary

Master Ball Joint Installer/Remover Adapter SetSKU 1103612 1299937310• Used to Expand the Capability of OEMTOOLS #37089 Ball Joint Press• Includes All the Receiver Tubes and Removing/Installing Adapters

Needed to Work on Many GM, Ford and Chrysler 2 and 4 Wheel Drive Pick-Ups, Vans and SUVs

Toyota 8 Pin Front Hub Locknut Socket SKU 298205 29 9925962 • Allows for Easy Removal and Installation of

Front Hub Lock Nut without Damage to the Nut• Applications Toyota

4Runner 2WD (2007-2014), Toyota Sequoia (2008-2014), Toyota Tundra (2007-2014)

• 3/4" Drive

Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions

5 Lb. Slide HammerSKU 1103572 49 9937033 • Used to Pull Bushings, Seals, Sleeves,

Bearings, Flange-Type Rear Axles, Front-Wheel Drive Hubs, Dents and Pressed-In Bolts with Two or Three Jaw Puller Options

Color May Vary

NEW

Rear Axle Puller SetSKU 094801 89 9927202• Use for Flange-Type Rear Axle and Bearing

Removal on Most Late Model Passenger Cars and Light Trucks

Axle Popper KitSKU 514017 69 99STK71410• Valuable Tool for Transmission Shops,

Garages, Tire Shops and Body Shops• Shim Included in Kit to Fill Larger Gap

Found on Some Vehicles• Applies Even Pressure to Both Sides of Shaft• Safer and Surer Than a Pry Bar

Axle Spindle Threading SetSKU 1103645 59 9937233• Used to Clean or Repair Axle Threads• Set Comes with a Special Twist Shape

that Provides Easier and Quicker Work• Sizes Included:

M20 x 1.25, M20 x 1.50, M22 x 1.00, M22 x 1.50, M24 x 1.50, M24 x 2.00, 13/16" x 20 UNEF, 3/4" x 20 UNEF and 27 mm Extension Bar.

Rear Axle Bearing Puller KitSKU OUTSIDE BUY/EPO 59 99KDT41710• Designed to Make the Removal of Semi-Floating Rear

Axle Bearings Easier on Most Domestic Cars• Includes: 1" x 1-7/8" Puller,

1-5/16" x 2-2/8" Puller, 1-3/8" x 2-7/8" Puller

• Molded Case Included

NEW

Axle Popper™ IISKU 010119 44 99 STK71415• Tapered on Both Ends• Fits in Air Hammer• Increased

Base Size for Additional Strength

• Safer Than a Pry Bar