chemical kinetics made simple
DESCRIPTION
A complete introduction to all things chemical kinetics designed specifically for non-chemists to understand. Fair warning: The presentation is very rigorous in its mathematical treatment, which is makes it a useful reference for looking up equations, but this can unfortunately make it less polished and flowing then a typical presentation. I tried my best to spell everything out clearly, but despite my best efforts it's still pretty dense.TRANSCRIPT
- 1. Chemical Kinetics Made Simple
A complete functional background in chemical kinetics specifically designed for non-chemists
September 2009
Presented by Brian M. Frezza
2. What are Chemical Kinetics?
Kinetics is the study of the time course behavior of a chemical
reaction.
How fast do chemical reactions go?
Formation of product chemical
Consumption of reactant chemical
3. Why Should I Care?
Synthetic Optimization
How long and under what conditions should you allow a reaction to
proceed to maximize yield and profit and minimize unwanted side
reactions?
Information Processing
Biological Systems
Living systems respond to their environment largely by modulating
the kinetics of their signaling networks.
Molecular Computing
Systematic control of kinetics mechanism can be used to design
synthetic systems which process information.
4. Why Should I Care?
Mathematical Models
The primary business of science is to produce models that
faithfully represent the physical processes involved.
Allows us to hypothesize what will happen in a chemical reaction
without actually performing it.
Mathematical models are what separate experimentation from
engineering and are woefully under-employed in the
life-sciences.
5. Anatomy of a Reaction
A
B
C
D
+
+
Chemical reactions can be general depicted as follows:
This example designates chemical A and chemical B react to form C
and D.
Letters are generally used as placeholders when signifying any
reaction between any two unique chemicals A and B (like x and y are
used to represent variables in algebra).
6. Anatomy of a Reaction
CH4
OH
CH3
H2O
+
+
Specific chemical reactions can be specified by supplying names or
formula of the chemicals participating.
For instance:
Or:
7. Anatomy of a Reaction
A
B
C
D
+
+
Reactants
Products
Reagents
Chemicals on the left hand side of the arrow are called
reactants
Chemicals on the right hand side of the reaction are called
products.
Chemicals on either side of the reaction are often referred to as
reagents, species, participants, or moieties.
8. Anatomy of a Reaction
2A
C
D
A
A
C
D
+
+
+
Equivalents
Numbers in front of the reagents are called stoichiometric
coefficients or equivalents.
Equivalents specify how much of a reagent is consumed or produced
in the course of the reaction.
For instance, the above reaction could also be written as:
Equivalents do not necessarily imply a number of discreet molecules
that participate in each reaction.
Equivalents signify an average proportion of the reagent consumed
or produced relative to the other participants, and can thus be
fractions.
9. Anatomy of a Reaction
10. Anatomy of a Reaction
A
B
C
D
A
B
C
D
+
+
+
+
irreversible
reversible
The arrows signify the type of reaction, which can be irreversible
when the point one direction.
This means any mass that reacts to form product is permanently
product.
Or reversible if they point both directions.
Meaning that the mass proceeds to equilibrium, reacting back and
forth between product and reactant until a balance is reached (more
on this later).
11. C
C
D
C
D
Anatomy of a Reaction
A
B
A
B
+
+
Systems of reactions can be designated by individually specifying
each possible reaction like so:
Or with shorthand by drawing multiple arrows like so:
Systems of reactions are sometimes referred to as the reaction
pathway or reaction channels,or more loosely as the
mechanism.
12. What are the Units?
Amounts, or number of molecules of a chemical, are usually
specified as Moles (mol) in multiples of Avogadros number which is
roughly 6.022 x 1023 molecules per mol.
A more relevant and commonly employed unit is concentration, or
amount per volume.
These are specified in Molar (M) and are in units of
Moles/Liter
Sometimes square brackets around a name is used to denote
concentration.Eg. [A] means the concentration of A.
Both of these units are in metric, so prefixes like milli-(m),
micro-(or u), nano-(n) , etc. are commonly used shorthand for order
of magnitude.
13. Chemical Kinetics Outline
Chemistry Background
Chemical Kinetics Background
Phenomenological Kinetics
Stochastic Simulation Approach
14. Chemical Kinetics
The Goal:
Produce a mathematical model that can faithfully represent how
known chemical reactions will proceed, without having to
experimentally run that exact reaction in the lab.
Vs.
15. Chemical Kinetics
The Process
Run a set of experimental test reactions and use the data to
extract a set of parameters regarding that reaction.
Use these parameters to predict how this reaction would proceed
under different conditions from the test reactions:
With different concentrations of reagents
Under different temperatures or reaction conditions
When run in combination with other known reactions
16. Chemical Kinetics
What is the Physical Basis
Collision Theory and Transition State Theory
Molecules diffusing at random though a solution react when they
collide with enough energy to react.
Increasing concentration increases odds of collision at any given
time, and thus increases the velocity at which a reaction
proceeds.
Likewise, lowering the energy barrier for reaction can also
increase velocity by increasing the odds that any given collision
is productive.
Every chemical reaction has a unique energy barrier that impacts
the velocity of the reaction, and thus must be parameterized
experimentally.
17. Chemical Kinetics
Uniform Concentration
All the kinetic treatments presented here assume that the reaction
vessel is well mixed and thus concentration of the reagents are
uniform thought the vessel.
For macroscopic vessels (>100uL) mixing can be accomplished
simply by stirring the reaction.
In small vessel the natural rate of diffusion can be fast enough to
consider it well mixed (such as the internal volume of a biological
cell).
Heres a petri dish with an unstirred reaction.
Local environments in the dish have different concentrations and
thus are the vessel is not kinetically uniform.
18. Chemical Kinetics Outline
Chemistry Background
Chemical Kinetics Background
Phenomenological Kinetics
Stochastic Simulation Approach
19. PhenomenologicalKinetics
Classical Phenomenological kinetics states:
At any given time (t), the reaction proceeds at rate that is a
product of the concentration of the reactants at time (t), and a so
called rate constant (k).This is called a rate equation, or a rate
law.
Since the concentration of the reagents is also a function of time,
rate equations are first-order ordinary differential equations
(ODEs).
Solving these ODEs provides functions for the concentration of the
reagents vs. time.
20. PhenomenologicalKinetics
A
B
Rate Equations
For example, lets look at this First-orderIrreversible
reaction:
Some rate equations for A and B would be:
In other words, the rate of consumption of the concentration of A
and the production of B at time t is equal to k times the
concentration of A at time t.
21. PhenomenologicalKinetics
Extent of Reaction
We know one additional piece of information ties together the rate
laws for each reagent in the system.
Conservation of mass tells us that the mass in the system can
neither be created, nor destroyed in the course of the reaction,
only transfer between each of the reagents.
Therefore the concentrations of each of the reagents can be related
by the extent of reaction ().
Thus, the change in concentration of the reactant must be equal to
the change in concentration of the products.These are called the
mass conservation equations.
By definition, initial extent of reaction (0) = 0
22. PhenomenologicalKinetics
A
B
Extent of Reaction
So for our example:
Integrating and solving for [A]t and [B]t yields:
Mass conservation:
23. PhenomenologicalKinetics:
A
B
The rate equations can also be expressed in terms of extent of
reaction:
Rate Equation:
24. PhenomenologicalKinetics:
A
B
Taken togeather when the mass conservation is substituted into the
rate equation in terms of the extent of reaction:
Mass Conservation:
Rate Equation:
ODE and boundary condition:
25. PhenomenologicalKinetics:
The solution to this ODE yields:
This particular ODE could be solved using separation by parts, but
often you find these solutions in a lookup-table or use math
software to determine them.Ill provide a list of some solutions to
the basic reactions later in the presentation.
When these equations are not directly solvable, (and they often are
not) numeric integration is used to simulate a solution.This is
computationally expensive (slow to calculate) but the rest of this
process remains the same.
ODE and boundary condition:
Closed-form solution:
26. PhenomenologicalKinetics:
Substituting the solution for the extent of reaction back into the
mass conservation equations yields the concentrations of each
reagent vs. time:
Closed-form solution:
Mass Conservation:
Concentration vs. Time:
27. PhenomenologicalKinetics:
In the lab, perform test reactions with known initial
concentrations, and observe the concentration of one of the
reagents as a function of time.
For example, here is the data when from a test reaction run under
these starting conditions:
28. PhenomenologicalKinetics:
Now use non-linear regression to fit the rate constant k, to the
concentration vs time equations you solved earlier by minimizing
the sum squared error between the expected value and the
data.
Concentration vs. Time:
k = 1.33563 hour-1
29. PhenomenologicalKinetics:
A
B
Victory!We can now simulate this particular reaction under any
starting concentrations and couple it with any other
reaction.
where
k = 1.33563 hour-1
[A]0 = 50nM[B]0 = 450nM
[A]0 = 250nM[B]0 = 250nM
[A]0 = 250nM[B]0 = 0nM
30. PhenomenologicalKinetics
Step by Step Review of the Process:
Determine the mass conservation equations, and rate equations for
the given mechanism.
Substitute the mass conservation into the rate equations and solve
the ODEs for extent of reaction vs. time.
Substitute the solution for the extent of reaction vs. time back
into the mass conservation equations to determine the
concentrations of each reagent vs time.
Using the concentration of each reagent vs. time, fit the values
for the rate constants (k) against the test reaction data.
31. PhenomenologicalKinetics
nAA
nBB
nCC
nDD
+
+
General Rules for determining Mass conservation:
Reversible or Irreversible, either way this not affect mass
conservation (well see this later in the rate equations)
Reactants are consumed by the extent of reaction
Number of equivalents of A
Products are produced by the extent of reaction
32. PhenomenologicalKinetics
k1
nAA
nBB
nCC
nDD
+
+
k-1
k1
nAA
nBB
nCC
nDD
+
+
General Rules for determining Rate Equations:
Product of the rate constant, and concentrations of reactants at
time t
Equivalents of B
By definition, extent of reaction always starts at 0.
Forward Reactions work towards the extent of reaction
Reverse Reactions work against the extent of reaction
33. PhenomenologicalKinetics
nAA + nBB
nCC + nDD
nAA + nBB
nEE
General Rules for determining Mass conservation with parallel
reactions:
Two extents of reaction are involved.One for each reaction in the
system
Both reactions consume A and B and so both must be accounted for in
the mass conservation.
Only one reaction produces E, so only it is included in Es
conservation of mass
34. PhenomenologicalKinetics
General Rules for determining Rate Equations with parallel
reactions:
k1
nAA + nBB
nCC + nDD
k-1
k2
nAA + nBB
nEE
Notice that both extent of reactions remain connected only through
the conservation of masses, and not their rate equations
As always, both extent of reactions also start at 0 by
definition.
35. PhenomenologicalKinetics
nAA + nBB
nCC
nCC
nDD
General Rules for determining Mass conservation with consecutive
reactions:
Cs mass is involved is produced by the first reaction and consumed
by the second.
36. PhenomenologicalKinetics
nAA + nBB
nCC
nCC
nDD
General Rules for determining Rate Equations with parallel
reactions:
k1
k-1
k2
Again, both extent of reactions remain connected only through the
conservation of masses, and not their rate equations
37. PhenomenologicalKinetics
A
B
k1
A
B
k-1
k
k
A + B
C
Some closed-form solutions to extents of common reactions.
First-Order Irreversible:
First-Order reversible:
Second-Order Irreversible Homogeneous:
Second-Order Irreversible Heterogeneous:
k
2A
C
H. Metiu,Physical Chemistry: Kinetics, New York: Taylor &
Francis Group, 2006.
38. PhenomenologicalKinetics
k1
A
B + C
k-1
k1
A + B
C
k-1
Some closed-form solutions to extents of common reactions.
Second-Order Reversible General Solution:
Unimolecular to Heterogeneous:
Heterogeneous to Unimolecular:
H. Metiu,Physical Chemistry: Kinetics, New York: Taylor &
Francis Group, 2006.
39. PhenomenologicalKinetics
k1
k1
A + B
C + D
2A
C + D
k-1
k-1
Some closed-form solutions to extents of common reactions.
Second-Order Reversible General Solution:
Heterogeneous:
Homogeneous:
H. Metiu,Physical Chemistry: Kinetics, New York: Taylor &
Francis Group, 2006.
40. k2
k1
A
C
A
B
PhenomenologicalKinetics
k2
A + B
D
k1
A + B
C
Some closed-form solutions to extents of common reactions.
First-Order Irreversible parallel:
Second-Order Irreversible parallel:
H. Metiu,Physical Chemistry: Kinetics, New York: Taylor &
Francis Group, 2006.
41. k
k2
k
k1
B
C
B
C
A
B
A
B
PhenomenologicalKinetics
Some closed-form solutions to extents of common reactions.
First-Order Irreversible repeated:
First-Order Irreversible consecutive:
H. Metiu,Physical Chemistry: Kinetics, New York: Taylor &
Francis Group, 2006.
42. PhenomenologicalKinetics
Detailed Balance
Thermodynamics can be used to give us additional information
regarding the special case of reversible reactions.
G can be obtained through additional experimentation (such as
isothermal calorimetry).
In the case of reversible reactions, the equilibrium constant Keq
can be determined from G, and the ratio of the forward and the
reverse reaction can be determined from Keq
Where R is the universal gas constant and T is temperature
43. PhenomenologicalKinetics
Some Words about the Rate Constants (k)
k is really a function of temperature and other reaction
conditions.
In a closed system with a constant temperature, k can be treated as
constant with respect to time.
There are also models to describe how k varies as a functions of
these reaction conditions.
The Arrhenious (and Generalized Arrhenious) equations for instance
describes k as a function of temperature:
The units of k change depending on the order of the reaction.
First-Order: time-1
Second-Order: molarity-1 time-1
Nth-Order: molarity-(N-1) time-1
Where R is the universal gas constant and T is temperature, Ea is
the activation energy of the reaction, k0 is the so-called
pre-exponential and n is a fudge factor.
44. Chemical Kinetics Outline
Chemistry Background
Chemical Kinetics Background
Phenomenological Kinetics
Stochastic Simulation Approach
45. Stochastic Simulation
Phenomenological Kinetics Assumptions
By utilizing ODEs to describe rate laws Phenomenological kinetics
imply that concentration is a continuous quantity.
In reality, molecules are really discrete entities, and thus one
tenth of a water molecule does not truly exist in the physical
world.
However, Avogadros number is huge (1023), and thus even a nanomole
of material consists of more then one hundred trillion molecules,
so in lab scale reactions this is often not a bad assumption.
46. Stochastic Simulation
Phenomenological Kinetics Assumptions
Because concentration is treated as continuous, the solution to the
rate law is deterministic.Meaning that the exact same number of
molocules should have reacted at time t, every time you run that
reaction.
In reality, at any given time an individual molecule can either
have reacted or not.
By comparison, its not accurate to say that on a single coin toss
the expected outcome is to receive of one half of a heads.
Again, Avogadros number is huge and so the average number of
molecules that have reacted at any given time is very
consistent.
After one hundred trillion coin tosses its fairly reasonable to say
that the expect outcome is around half heads.
47. Stochastic Simulation
But what happens when the number of molecules involved in a
reaction is very low?
Or what happens when the behavior of a system diverges sharply
around a critical number of molecules?
Both of those assumptions break down and we can only speak to the
probability of a number of reactions occurring as a function of
time.
In these cases, we say that the reaction is stochastic, and
phenomenological kinetics no longer properly apply.
48. Stochastic Simulation
The Stochastic Formulation state that at any given time, a
probability distribution describes the possible concentration of
each reagent.
The function that describes this distribution of all known reagents
is known as the so called Master Function.
Instead of using concentrations as the preferred unit for amounts,
the stochastic formulations preferred unit is a number of molecules
in a fixed volume.
49. Stochastic Simulation
Stochastic Simulations Algorithms (SSA)
These Monte Carlo procedures simulate a single random path, or
trajectory thought the Master Function, where random choice is
weighted according to the probabilities in the Master
Function.
Simulating multiple trajectories can then be used to estimate the
original distribution of the Master Function.
Instead of parameterizing reactions by rates, SSA methods are
parameterized by probability of a reaction happening.
In the 1970s Gillespie came up with an exact method of simulating
trajectories known as the Direct Method.
D. T. Gillespie, J. Phys. Chem. (1977), 81, 2340
50. Stochastic Simulation
The Direct Method (The Gillespie Method)
N is the number of reagents
M is the number of possible reactions pathways
Reversible reactions count as two pathways, one for the forward and
one for the reverse reaction.
XN is the set containing the number of molecules of each reagent
N
D. T. Gillespie, J. Phys. Chem. (1977), 81, 2340
51. Stochastic Simulation
A
B
A + B
C
2A
B
The Direct Method (The Gillespie Method)
HM is the set of the number of combinations available for each M
reaction.
For a first-order reaction:
Hm = XA
For a second-order heterogeneous reaction:
HM= XAXB
For a second-order homogeneous reaction:
HM = (XA)(XA-1)
(This corrects for self-collision)
Set CM the probability for each M reaction occurring per molecule
of reactant.
This is a little like k in phenomenological kinetics, and is the
parameter you must fit to for each individual reaction.
Set or AM = CMHM or propensities for each reaction.
The probability of a single reaction CM, times the number of
molecules available for that reaction HM.
A0 = the sum of all propensities in AM
D. T. Gillespie, J. Phys. Chem. (1977), 81, 2340
52. Stochastic Simulation
The Direct Method
When calculating a trajectory in the direct method, a single
molecule reaction is individual simulated in each step of the
calculation.
For each step:
Two random numbers between 0 and 1 (r1 and r2) are generated.
The time step (tau) is generated as:
And a reaction is selected using the second random number r2
according to the weighted probabilities in AM
The time is then updated as t + tau, and the set XN is updated to
reflect a single molecule reaction as selected above.
D. T. Gillespie, J. Phys. Chem. (1977), 81, 2340
53. Stochastic Simulation
The Direct Method
For example, heres what a generated trajectory might look like for
an enzyme substrate reaction:
This more faithfully represents the individual events in a single
chemical reaction the classical approach, but is computationally
exhaustive.
54. Stochastic Simulation
The direct method is exact, but computationally expensive
Because it must individually simulate each molecular reaction, the
time step tau is inversely proportional to the number of molecules
in the system, so simulating even a small space of time with a
modest number of molecules can take enormous computing power.
Furthermore, multiple trajectories must be generated in order to
approximate the master function, further increasing the computing
burden.
So called Tau-leap methods are estimated methods that simulate
multiple molecular reactions in a single time step.
These methods can sacrifice a reasonable degree of accuracy in
return orders of magnitude improvements in computational
efficiency
55. Stochastic Simulation
Leap Condition
Much of these leap methods attempt to satisfy a so-called leap
condition, which is designed to pick a time step tau such that the
changes in the propensity functions during this tau are
negligible.
Tau-leap methods
Explicit Tau-Leap
A tau is manually selected by the user (hence explicit).
The number of molecules changed for each reaction within tau is
sampled from a Poisson distribution.
Must be careful to set tau such that the leap condition is not
violated.
Can lead to negative values if tau is too large (if you jump
through zero molocules in a single leap).
M. Pineda-Krch, J. Stat. Software, (2008) 25,12
D. T. Gillespie, J. Chem. Physics. (2001) 115, 1716
56. Stochastic Simulation
Binomial Tau-Leap
The maximum number of molecules that can react is kept track of in
each tau so negative values are not generated.
Tau is selected by a so called coarse graining factor f. such
that:
The number of molecules changed for each reaction within tau is
sampled from a Binomial distribution.
M. Pineda-Krch, J. Stat. Software, (2008) 25,12
A. Chatterjee et al., J. Chem. Physics. (2005) 122, 024122
57. Stochastic Simulation
Optimized Tau-Leap
Reactions are partitioned into critical and non-critical
groups.
A reaction is defined as critical if the reactants are near
depletion (XN< some threshold)
If a critical reaction is selected, a single molecule is
incremented at a time.
If a non-ciritical reaction is selected, then the number of
molecules changed for each reaction within tau is sampled from a
Poisson distribution.
A candidate time step taunc to the next non-critical reaction is
calculated by estimating the percent change in the propensities and
selecting a taunc such that the percent change is under a threshold
value.
If the candidate taunc is smaller then a selected course grain
factor, then the algorithm halts the tau-leaping and simulates
individual molecule reactions for a set number of steps.
If the candidate taunc is greater then a selected course grain
factor, then the algorithm selects another candidate time step to
the next critical reaction, tauc
The algorism then picks the lesser of the two (taunc and tauc) and
selects that as the time step.
M. Pineda-Krch, J. Stat. Software, (2008) 25,12
Y. Cao et al., J. Chem. Physics. (2006) 124, 044109
58. Chemical Kinetics Outline
Chemistry Background
Chemical Kinetics Background
Phenomenological Kinetics
Stochastic Simulation Approach
59. Summary
Chemical Kinetics deals with the time course of a chemical
reaction.
Reactions are described according to a specific language.
Reactions are characterized by fitting parameters in a model to
test reactions.
Once they have been parameterized, reactions can be simulated under
unique starting conditions and when coupled with other
reactions.
The time course of a reaction can be modeled using multiple
methods
Classical Phenomenological Kinetics
Stochastic Simulation Algorithms