Horizontal Chemical Process PumpsTurbo-Flow™ WCP SeriesA Wastecorp Pump Brand

WCP SeriesChemical Process

®

®

T ● Hydraulic balance design for steady characteristic curves

● Easy low cost maintenance and parts program

● High efficiency Impeller design

● Compact design

● Clockwise rotation

● Grease or oil lubricated long life roller bearings

Standard Features

WCP Turbo Flow

Chemical and Petrochemical Transfer PumpsTurbo Flow WCP Series

Any type of thin, clean, non-aggressive and non-explosive liquids or oils that are generally free from low amounts of solids or fibers.

The Turbo Flow WCP Series end suction design pumps are specifically engineered fortransfering fluids used in the chemical, petrochemical and refinery markets. The WCP Seriespumps comply with AP610 and VDMA24297 standards. The WCP Series is the choice where quality and price meet the job.

The heavy-duty and rugged WCP series is engineered for easy maintenance - the entire rotation element is removable without disturbing piping or the pump body. The back pull-out design simplifiesmaintenance and allows for easy inspection. The WCP Series is offered as a close-coupled modelup to 75 HP (55 kW) motors, and with an independent bearing housing with flexible coupling (FC) for units ranging from 100HP (75 kW) up to 1000 HP (745 kW) motors.

Fluid Transfer

SER

IES

Chemical ProcessPumps Turbo Flow

WCP Chemical Process Pump Series Cutaway Drawing

THow to select your model:WCP O- 100- ? FC- (A)

A, B, C, D and E = Impeller Trimming Type

Flexible Coupling

Impeller Size (Contact Factory for Sizing )

Pump Size (based on discharge connection size)

Application Specific Model:C = Closed impellerO = Open-impellerE = High Temperature

Wastecorp End-Suction Chemical Process Centrifugal Pump Series

Turbo Flow

WCP Chemical Process Pump Series Pump Curves (60 Hz @ 3600 RPM )

Turbo Flow WCP Series Pump CurvesHorizontal Chemical Process Pumps

WCP Chemical Process Pump Series Pump Curves (Utilizing 60 Hz @ 1750 RPM )

Capacity (GPM)

Turbo Flow

WCP Chemical Process Pump Series Pump Performance Chart (Utilizing 60 Hz /3600 RPM Motors)

WCP Chemical Process Pump Series Pump Performance Chart (Utilizing 60 Hz / 1750 RPM Motors)

WCP SERIES MODEL Pump Size¹

(inch) DN (mm) NPS (inch) (m3/hr) (GPM) (m) (ft) (mm) (inch) (kW) (HP)

WCP-100 1 x 1 x 8 25 1 14 61 71 231 200 8 19 25WCP-125 1-1/4 x 1-1/4 x 10 32 1.25 24 106 122 402 250 10 52 70WCP-150 1-1/2 x 1-1/2 x 12 40 1.50 50 222 166 543 315 12 130 174WCP-200 2 x 2 x 16 50 2 104 460 279 917 400 16 346 463WCP-250 2-1/2 x 2-1/2 x 12 65 2.50 162 713 194 638 315 12 276 371WCP-300 3 x 3 x 16 80 3 205 903 269 883 400 16 432 579WCP-400 4 x 4 x 16 100 4 360 1,585 279 917 400 16 544 730WCP-600 6 x 6 x 16 150 6 624 2,747 295 969 400 16 544 730WCP-800 8 x 8 x 16 200 8 1,020 4,491 292 959 400 16 544 730

WCP SERIES MODEL Pump Size¹

(inch) DN (mm) NPS (inch) (m3/hr) (GPM) (m) (ft) (mm) (inch) (kW) (HP)

WCP-100 1 x 1 x 8 25 1 7 31 17 57 200 8 3 3WCP-125 1-1/4 x 1-1/4 x 10 32 1.25 13 58 29 94 250 10 7 9WCP-150 1-1/2 x 1-1/2 x 12 40 1.50 25 111 42 137 315 12 19 25WCP-200 2 x 2 x 16 50 2 53 232 69 227 400 16 52 70WCP-250 2-1/2 x 2-1/2 x 12 65 2.50 77 338 46 151 315 12 32 43WCP-300 3 x 3 x 16 80 3 102 449 66 217 400 16 78 104WCP-400 4 x 4 x 20 100 4 216 951 108 354 500 20 190 255WCP-500 5 x 5 x 16 125 5 264 1,162 72 236 400 16 156 209WCP-600 6 x 6 x 25 150 6 432 1,902 166 543 630 25 544 730WCP-800 8 x 8 x 25 200 8 696 3,064 190 624 630 25 968 1,298WCP-1000 10 x 10 x 25 250 10 1,032 4,544 184 605 630 25 1,227 1,645WCP-1200 12 x 12 x 25 300 12 1,740 7,661 190 624 630 25 2,160 2,897WCP-1600 16 x 16 x 25 400 16 2,868 12,627 180 591 630 25 3,456 4,635

NOTES:1. Please contact the factory for proper model selection for your application.2. This is a general overview of the performance for this series of Turbo-Flow pumps.3. Optional impeller sizes are available, including trimmed impeller sizes. Contact factory for additional information.4. Wastecorp. Pumps reserves the right to make revisions to its products, performance, dimensions and specificationsand related information.

d informa

Max. PowerDischarge Conn.

Size Max. Capacity Max. HeadMax. Impeller OD

Size³

Max. PowerDischarge Conn.

Size Max. Capacity Max. HeadMax. Impeller OD

Size³

Turbo Flow WCP SeriesHorizontal Chemical Process PumpsOverview of Performance Range Using 60 Hz Motors²

Turbo Flow

WCP Chemical Process Pump Series Pump Curves (50 Hz @ 2950 RPM )

Turbo Flow WCP Series Pump CurvesHorizontal Chemical Process Pumps

WCP Chemical Process Pump Series Pump Curves (Utilizing 50 Hz @ 1450 RPM )

200

Turbo Flow

WCP Chemical Process Pump Series Pump Performance Chart (Utilizing 50 Hz /2950 RPM Motors)

WCP Chemical Process Pump Series Pump Performance Chart (Utilizing 50 Hz / 1480 RPM Motors)

NOTES:1. Please contact the factory for proper model selection for your application.2. This is a general overview of the performance for this series of Turbo-Flow pumps.3. Optional impeller sizes are available, including trimmed impeller sizes. Contact factory for additional information.4. Wastecorp. Pumps reserves the right to make revisions to its products, performance, dimensions and specificationsand related information.

d informa

Turbo Flow WCP SeriesHorizontal Chemical Process PumpsOverview of Performance Range Using 50 Hz Motors²

WCP SERIES MODEL Pump Size¹

(mm) DN (mm) NPS (inch) (m3/hr) (GPM) (m) (ft) (mm) (inch) (kW) (HP)

WCP-100 25 x 25 x 200 25 1 12 51 49 161 200 8 11 15WCP-125 32 x 32 x 250 32 1.25 20 88 85 279 250 10 30 40WCP-150 40 x 40 x 315 40 1.50 42 185 115 377 315 12 75 101WCP-200 50 x 50 x 400 50 2 87 383 194 636 400 16 200 268WCP-250 65 x 65 x 315 65 2.50 135 594 135 443 315 12 160 215WCP-300 80 x 80 x 400 80 3 171 753 187 614 400 16 250 335WCP-400 100 x 100 x 400 100 4 300 1,321 194 636 400 16 315 422WCP-600 150 x 150 x 400 150 6 520 2,289 205 673 400 16 315 422WCP-800 200 x 200 x 400 200 8 850 3,742 203 666 400 16 315 422

WCP MODEL Pump Size¹(mm) DN (mm) NPS (inch) (m3/hr) (GPM) (m) (ft) (mm) (inch) (kW) (HP)

WCP-100 25 x 25 x 200 25 1 6 26 12 39 200 8 2 2WCP-125 32 x 32 x 250 32 1.25 11 48 20 66 250 10 4 5WCP-150 40 x 40 x 315 40 1.50 21 92 29 95 315 12 11 15WCP-200 50 x 50 x 400 50 2 44 194 48 157 400 16 30 40WCP-250 65 x 65 x 315 65 2.50 64 282 32 105 315 12 19 25WCP-300 80 x 80 x 400 80 3 85 374 46 151 400 16 45 60WCP-400 100 x 100 x 500 100 4 180 793 75 246 500 20 110 148WCP-500 125 x 125 x 400 125 5 220 969 50 164 400 16 90 121WCP-600 150 x 150 x 630 150 6 360 1,585 115 377 630 25 315 422WCP-800 200 x 200 x 630 200 8 580 2,554 132 433 630 25 560 751WCP-1000 250 x 250 x 630 250 10 860 3,786 128 420 630 25 710 952WCP-1200 300 x 300 x 630 300 12 1,450 6,384 132 433 630 25 1,250 1,676WCP-1600 400 x 400 x 630 400 16 2,390 10,523 125 410 630 25 2,000 2,682

Max. PowerDischarge Conn.

Size Max. Capacity Max. HeadMax. Impeller OD

Size³

Max. PowerDischarge Conn.

Size Max. Capacity Max. HeadMax. Impeller OD

Size³

urbo FlowFor more information contact 1.888.829.2783 or info@wastecorp.com

Visit us at www.wastecorp.com

Copyright© WPCI Group

®

www.wastecorp.com

A Wastecorp Pump Brand ®