+12v Constant = Orange +12v Acc. Switch = DATA -12v Chassis Ground= Black/White +12v Illumination = +12v Dimmer =Antenna/Amp Remote =Pink LF+ = Tan LF- = Gray RF+ = Lt. GReen RF- = Drk. Green LR+ = Brown LR- = Yellow RR+ = Drk. Blue RR- = Lt. Blue

Dash Type :

Kit: GM1583B/GM1590ABHarness:

Interface Adapter(s): OnStar/ Non-Bose: GMOS210BOnStar/W/Bose: GMOS2B11B

About the Vehicle

Make: Chevrolet

Model: Silverado

Year: 2003-06

In Dash Application

Wire Color Codes

Speaker Notes

Front Speaker Sizes

Speaker Adapter :

Factory Assembly: Speakers in factory adapter.

Rear Door

Double Din

GM09SR

Factory Assembly:

NOTES

Lower Door : 7'' Midrange

Dimensions:

Dimensions: W= L= D=

NOTES

Lower Door: 5.25'' Midrange

Standard/Optional

Amplifier Locations: Under the center console.

Aftermarket Type: Din/Double Din

W= L= D=

Speaker Adapter :

Speaker Harness :

Speaker Harness :

Type: BOSE Premum System Location: At Speakers

Speaker Sizes

Antenna Adapter: MDA-1

Front Dash: 1.25'' Tweeter

MP3 CompatibleCD PlayerIn-Dash Changer (6 Disc)Bose Audio Navigation SystemOn Star

SILVERADOCHEVROLET

2003-06

Crew Cab

Rear Pillar: 4x6'' Midrange

Images

Front Speaker

Radio Removal

Front Speaker(s)

Rear Door Speaker(s)

Radio

Tweeter

1. Turn Ignition on and shift vehicle into first.2. Trim bezel unsnaps by pulling firmly.3. Using a 7mm socket remove 3 bolts from radio disconnect and remove.

Front Door

1. Remove floor trim.2. Remove Upper back wall panel.3. Extract (2) Philips head screw from side rear panel, Pull panel and remove.

1. Extract (1) 9/32" screw from bottom corner of door panel.2. Extract (1) 9/32" from upper door handle.3. Using a small flat screw driver, remove plastic bezel from door opener handle.4. Pull upwards on door panel, Disconnect and remove.5. Extract (4) T-15 torx screws from speaker, Disconnect and remove.

1. Unsnap and remove A-Pillar panel.

1. Use panel removal tool to remove plastic triangle.2. Use panel removal tool to remove plastic trim bezel around door opener handle.3. Use panel removal tool and remove window control panel, Disconnect and remove. Extract (1) 9/32" screw from behind.4. Extract (1) 9/32" from behind door handle.5. Use panel removal tool and remove door lock and unlock indicator.6. Pull upwards on door panel, Disconnect and remove all connectors.7. Push down on top finger tad of speaker and remove.

Rear Panel (Standard Cab/Extended Cab)

Rear Speaker

"A" Pillar Tweeter

Rear Door (Crew cab)

SILVERADOCHEVROLET

2003-06