Compact Water Chiller

CHILLY MAX

CHARACTERISTICS

·Hermetically closed motor compressor (Scroll)

·Cooling water circuit containing stainless steel water tank

and centrifugal pump

·Integrated electric heating rod (3 kW)

·Pressure switch integrated in the cooling circuit for pump

control - pump protection and energy-saving

·Integrated level-switch and integrated by-pass for the

pump

·Highly efficient micro-channel condenser that ensures

optimal heat-transfer

·All water parts in the unit are isolated

CHILLY MAX

The Chilly MAX unit has a compact design. It takes little space and is very easy to install and to start-up. The units are mobile

on wheels. The same as the Chilly shelf-top units, the Chilly MAX is equipped with a with a hermetically closed motor com-

pressor and with a complete cooling water circuit containing stainless steel water tank and centrifugal pump. Also, they

contain an additional heater which is integrated inside a stainless steel water-tank.

The new generation of the Chilly MAX series is equipped with a micro-channel condenser which enables even more efficient

heat-transfer. The ventilator is mounted on the top part of the unit, so the unit can be placed near a wall with any side facing it.

The side-boards are very easy to remove, allowing easy access for maintenance.

The Chilly MAX is available in three sizes and capacities from 6,4 – 12,7 kW. It is the optimal solution for small to medium-size

wineries, breweries, cideries, etc. that mainly wish to cool but that also need to heat their products from time to time.

APPLICATIONS

·Cooling and heating of must, wine, beer and other liquids

such as cider, carbonated soft-drinks, distillates etc.

·Fermentation temperature control

·Tartaric stabilisation of wines and biological reduction of

acids

·Cool storage of wine until bottling

·Maturation of young beer

·Cooling and stabilisation of distillates

·Room temperating of halls and storage rooms - only

possible with additional fan coils

Chilly MAX 50 Chilly MAX 90 Chilly MAX 110

TE

CH

NIC

AL

DA

TA

Cooling capacity *kWHP

6,48.58

10,714.35

12,717.03

Electrical supply400V / 3Ph / 50Hz

(other options by inquiry)

Max. absorbed power / Max. current consumption kW / A 4,2 / 7,8 6,0 / 10,5 7,1 / 13,4

Noise level ** dB (A) 73 73 73

Tank volume l 30 30 30

Type of pump Grundfos CM 3-4 Grundfos CM 3-4 Grundfos CM 3-4

Pump flow rate m³/h / bar 2,5 / 3,0 1,5 / 3,8 1,5 / 3,8

Dimensions (L x W x H)Weight

mmkg

750 x 880 x 1.000131

750 x 880 x 1.000141

750 x 880 x 1.000143

·Stainless steel frame with painted front board

·Units are mobile on wheels

·Side boards are easy to remove, interchangeable

between them

·Ventilator on the top part, air-blow direction upwards

·Refrigerant R410A

·Protection type of the chiller is IP54 minimum

·Water inlet/outlet connection: 3/4” (female)

·It is required to add Glycol (30 - 35%) to the cooling water

by outlet temperatures below +7°C.

SUITABLE FOR INDUSTRIES

from -10°C to +40°C (from 14°F to 104°F)

WATER TEMPERATURE RANGE

from +10°C to +42°C (from 50°F to 108°F)

AMBIENT TEMPERATURE RANGE

* Coo l i ng ca p ac i t i e s a t an amb i en t t empe ra tu re o f +3 2°C (8 9 ,6 °F ) and a w a te r t e mp e ra tu re o f +15°C (59 °F ) .

* * A t a d i s t an ce o f 1 m

Spe c i f i ca t i o n s su b j ec t t o ch a n ge .