chingola expo 2015 - · pdf fileare members of the institute of materials handling and...

13
Solutions to Mine Needs Chingola Expo 2015

Upload: hoangcong

Post on 13-Feb-2018

215 views

Category:

Documents


2 download

TRANSCRIPT

Solutions to Mine NeedsChingola Expo 2015

Brelko Conveyor Products (Pty) Ltd. Brelko® designs and manufactures conveyor belt cleaning equipment for a trouble-free flow of materials at transfer and load points. This is backed up by an installation and maintenance package. We have served as a supplier and advisor on spillage control to the bulk materials handling industry, since 1987 and offer proactive and ongoing maintenance for preventative spillage control and optimum belt cleaning. We are accredited with ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 certifications, and are members of the Institute of Materials Handling and Conveyor Manufacturers Association of South Africa Limited. We have branches in the United Kingdom and the United States, our master distributors in Australia, Chile, Greece, and agents located in more than 40 countries.

www.brelko.com

Hi-Force hydraulic torque wrenches are designed to handle the toughest bolting jobs accurately and quickly. Manufactured from lightweight aluminum, each model is powerful and compact to allow for easy positioning in even the most confined spaces and also offer an impressive torque accuracy of +/- 3%.

The TWS-N range of square drive hydraulic torque wrenches are fitted with a 360 uni-swivel quick release coupling, enabling easy positioning of the hydraulic hoses away from any possible pinch points. The internal reaction arm spline allows the operator to easily position the tool, and if necessary, react directly off the tool body in very confined access applications. All TWS-N models incorporate an easily reversible high grade alloy steel square drive enabling the operator to switch from tightening and loosening applications. Optional allen hex drives are available, along with a comprehensive range of high quality torque wrench sockets.

The TWH-N series of female hexagon cassette head hydraulic torque wrenches offer a choice of 5 models with output torque capacities from 2,625 Nm to 48,181 Nm. All models provide direct in-line reaction and minimal radius clearance for easy fitment in confined spaces.

The user friendly design of the tool simply requires the operator to withdraw / insert a single pin to change the ratchet head. Ratchet heads are available from Hi-Force in all standard metric and imperial AF sizes from 24mm to 175mm with low cost hexagon reducer bushes also available. Like the TWS-N range, the TWH-N models are also fitted with a 360 uni-swivel quick release couplings as standard.

Hi-Force offers a premium line of torque wrench pumps, compatible with all Hi-Force hydraulic torque wrenches. The TPA and TPE range of pumps offer a choice of air or electric options and are rigid, compact and lightweight by design. The pumps offer a high speed 3 stage design with multi-outlet 4 way split block for simultaneous operation of up to 4 hydraulic torque wrenches.

To find out more about Hi-Force torque tools range, please contact your local Hi-Force representative of visit www.hi-force.com.

Hi – Force Hydraulics (Pty) Ltd

Solutions to Mine NeedsChingola Expo 2015

A J Charnaud & Co (Pty) Ltd The only TRIPLE certified arc flash suit on the market!

AJ Charnaud & Co (Pty) Ltd. - a leading global manufacturer of personalprotective clothing for protection against radiant heat, electric arc flash, acid, flames, fireand molten metal splash – introduces an advanced electric switching suit that is triplecertified.CHARNAUD presents a complete "head-to-foot" solution to protect workers against the thermal effects of electric arc flash. The Survive-Arc® range of product includes garments ranging from 6 cal/cm² to 100 cal/cm² in various modern styles.One of the flagship products in the Survive-Arc® range, is the 51 cal/cm2 switching suit. The popular, proven and trusted switching suit offers an exceptional weight-to-protection ration, is comfortable to wear and skin friendly.This Survive-Arc® switching suit is the only triple certified arc flash suit on the market, meeting the requirements for: SANS 724 (South Africa), IEC 61482-2 and (Europe) and NFPA 70E (USA).Survive-Arc® garments are made from trusted and proven personal protective fabric – permanently Flame Resistant (FR) UltraSoft®, manufactured into hoods, jackets, trousers, gloves and complemented by special footwear and other accessories.

The Survive-ARC® 51 cal/cm2 switching suit is guaranteed flame resistant for the life of the garment, and is water washable, making the garment ideal to use for conditions where electric arc flash is a hazard.Added benefits include excellent breath-ability and high abrasion resistance whilst absorbing sweat and moisture. The cotton composition ensures that the wearer stays cool in summer and warm in winter, increasing comfort for the wearer.AJ Charnaud & Co (Pty) Ltd is an ISO 9001:2000 registered company, that was founded in 1972 by Fiona and Andrew Charnaud as a personal protective clothing manufacturer. Their protective clothing products range from protection against heat, flames, fire, acid, molten metal and the thermal effects of electric arc flash.

AJ Charnaud & Co (Pty) Ltd Contact DetailsTel: (+27) 11 794 6040Email: [email protected]

www.charnaud.co.za

Bagshaw Footwear (Pty) Ltd

www.bagshaw.co.za

The VenomWorks risk management solution is a unique, innovative and

integrated approach to venomous animal risk management. It leverages

specialist knowledge and experience to provide, risk assessment, training and

skills development, risk monitoring and management.

VenomWorks is the only service provider that offers risk management for

snakes, spiders, scorpions, bees & wasps. With industry leading training

materials and courses, the VenomWorks risk management framework has

redefined industry standards in health & safety.

Visit http://www.venomworks.com/free-downloads/ to download our free

emergency protocols for snake bite, spider bite, scorpion sting, bee & wasp

sting, and anaphylaxis.

VenomWorks (Pty) Ltd

Solutions to Mine NeedsChingola Expo 2015

http://www.venomworks.com/free-downloads/

• What makes the Engen IPS innovative Packaging System the ideal transport, storage and dispensing solution for bulk lubricants?

• It’s cost effective — it’s single use, which means no return freight, cleaning or maintenance costs.• It’s convenient — one 900L IPS pack holds the equivalent of over 4 drums’ worth of lubricant, making it a

big space saver. What’s more, you literally have your favourite lubricant on tap.• It’s clean and safe — it’s a sealed system so contaminants such as water and airborne particles can’t get

in.• It’s environmentally friendly— made from non-toxic materials, the entire unit is completely recyclable. You

can also re-use it to transport your used lubricants.• Engen Hydrokin ESF – Energy saving hydraulic fluid• Save up to 11% on your electricity consumption by simply changing your hydraulic fluid to Engen

Hydrokin ESF.• With the advent of the energy shortage and steeply rising energy costs, reducing your energy

consumption has many benefits.• The superior lubricating ability and lower frictional coefficient of Engen Hydrokin ESF has been proven,

under tough South African operating conditions, to lower energy consumption and therefore the associated costs.

• The results speak for themselves:• Energy savings of up to 11%• Maximum demand reduction of up to 4.5%• Reduced oil operating temperature

Solutions to Mine NeedsChingola Expo 2015

www.engen.co.zaEngen Petroleum LimitedEngen IPS Innovative Packaging SystemIPS, Engen’s innovative new system for transporting bulk lubricants, is a first for lubricants in Africa, scientifically engineered to offer solutions to issues experienced with long distance transportation, turnkey installations including on site inventory, contamination control and disposal.

The IPS container is a 1-way single use pack designed specifically for robust handling and ultimate product protection on the inside. It holds 900L of oil or 810kg of lubricating grease. Ideally it should be stored indoors but the container has been tested for extensively for outside storage in the harsh African sun. This container is constructed using a set of 5 layers of carefully selected materials to protect the product content during handling, filling, dispensing and storage. IPS can either be used in a fixed position (e.g. workshop) or in a mobile environment (e.g. 900L IPS moved around for various top-up jobs and oil changes)

Solutions to Mine NeedsChingola Expo 2015

R N E PUMPS - EVERYDAY DEWATERING SOLUTIONS

Pumps that are built to run wet or dry, are few and far between.The RNE Vertical Spindle Pump is such a pump, which incorporates over 35 years of experience in underground water removal.Built-in Agitators help to prevent blockages at the intake (Suction Inlet), and helps to keep the sumps clean, as the potential blockages are pumped away with the water.

For further information, please visit our website: Or contact us:Mark Enell - (+27) 82 612 0358 [email protected] Hein Duyts - (+27) 83 282 0868 [email protected] Office - (+27) 11 452 3528 [email protected]

www.rnepumps.com

Ryalsan North Engineering (Pty) Ltd t/a RNE Pumps

Toolquip and Allied are Importers and Stockists of the Rotabroach range of Magnetic Base Drills and Broach Cutters. These light weight drilling machines are used for on-site drilling of holes in steel from 11mm-65mm. We stock a full range of HSS & Carbide Tipped Cutters. Toolquip & Allied keep a range of spares parts and we service and repair the Magnetic Base Machines.

Allied Putziger (Pty) Ltd t/a Toolquip & Allied

www.toolquip.co.za

Linvar (Pty) Ltdwww.linvar.co.zaProduct:

Various Racking and Shelving options, combined with Linbin containers

Product Description:

Various, uniquely designed racking and shelving options, combined with various sized Linbin containers.The Problem:

Inadequate facility storage infrastructure and space wastage.

Our Solutions:

Our unique racking and shelving options, combined with our Linbin containers, will optimise your warehouse storage capacity. Our representatives will visit your site, discuss your unique requirements and then supply you with a written proposal and drawings for your own perusal. As soon as the project commences, we will ensure that all your requirements are met and that all racking and shelving holds up to industry standard, if not exceed them. By having our racking and shelving installed, combined with our seven sizes of Linbins, stock control will never be a nightmare again.

Other handling and storage optimisation equipment can also be supplied. Our comprehensive, issue 21 catalogue is now available and we will gladly provide you with a free copy when visiting our stand. Please feel free to discuss any of your needswith us on the day of the show, and we will make every effort to satisfy them entirely.

Solutions to Mine NeedsChingola Expo 2015

VME Group (Pty) Ltd

www.vmegroup.co.za

Ferry Captain1.Girth Gears:Ferry Capitain is a global leader in the design and manufacturing of open gears sets with the capacity to manufacture girth gears with a maximum diameter of 16m and a face width of 1.5m. Ferry Capitain design and manufacture girth gears in cast steel and nodular iron (SG Iron). Designs for new or replacement parts are done according to the AGMA and ISO standards. The castings for these gears are poured in our own foundries, resulting in 100% of the product being under our management and control.Ferry Capitain developed the ferrous alloy, FerryNod, that enables us to transfer up to 10MW of power per open gear set due to a minimum through hardness of up to 360BHN. With a significantly shorter manufacturing lead time than alternate materials and consuming less processing energy, FerryNod further solidifies Ferry Capitain's position amongst the most competitive worldwide suppliers of open gearing solutions for high power applications.

2.Pinions:Ferry Capitain can design new and manufacture replacement pinions according to AGMA and ISO standards.

3. Mill Heads:Ferry Capitain can design and manufacture mill heads in cast steel as well as nodular iron.

4. Mill Shells:ALC, a part of Group CIF designs and manufacture mill and kiln shells in various steel grades inclusive of stainless steel and duplex steels.

5.Mill Gearboxes:The ERmaster gearbox range has been designed to fit may applications for the heavy industry such as mill and kiln drives for the mining, cement, paper, sugar and other industries. The range consist of single to four stage gearboxes with parallel and right angle shaft for both horizontal and vertical positions.

6. Worm Gearboxes:CMD specialises in low speed, high torque applications and the worm gearbox range suits these applications. We have the capability to manufacture worm gearboxes with a center distance up to 1.3m.

7. Gear and Grid Couplings:CMD has a standard range of gear and grid couplings with torque from 1.2kNm to 5MNm and shaft <Ø800 mm as standard. Special designs for higher load applications are done per project.

For over sixty years, Morris Material Handling SA (PTY) LTD has been committed to providing engineered material handling solutions across a variety of industries throughout South Africa and into sub-Saharan Africa. The South African operation was established in 1952, and the company has become a legend within the industry.

Specialising in cranes, hoists and lifting equipment as well as servicing, maintenance, load testing and refurbishment of all makes of lifting equipment.

By choosing Africa’s Lifting Legend you tap into a wealth of knowledge, dedicated experience and industry know-how. Enjoy peace of mind knowing that your material handling solution brings value to your business.

Morris Material Handling SA (pty) LTD

www.morris.co.za www.craneaid.co.za

Head Office Tel: +27 (0)11 748 1000