25

D axMInStER CLUBMan WooDtURnInG CHUCk Excellent value for money:Equipped with universal accessory mounting jaws, this chuck fits a wide range of axminster accessories and jaws. the self-centering 4-jaw chuck is highly robust and versatile. Its extreme stability is supported by large threads in the scroll and jaws. the chuck body is made completely of stainless steel, which allows closer manufacturing tolerances. this ensures better concentricity and minimises vibrations. the max. jaw movement is 25 mm (plus safety capacity). Includes chuck key for one-handed operation. For safety, the maximum jaw movement is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws.

F UnIVERSaL JaWS FoR axMInStER CLUBMan Sk100 anD GoLIatH Jaws with formed ridge for attaching axminster accessories. axminster chucks come with jaws, but a separate set of universal jaws makes swapping accessory jaws much quicker. the accessory jaws do not have to be detached from the jaws each time you change the workpiece. Set consisting of four jaws. Fits chuck types Clubman Sk100.No. 702272

2 Axminster Woodturning Chuck Clubman SK100, SoloModel M33 x DIn 800Ø 100 mmWeight 1.6 kg (solo)No. 702241

1 Axminster Woodturning Chuck Clubman SK80, with type C80 JawsModell 1“ x 8 tpiExternal chucking 40-65 mmInternal chucking 50-75 mmØ 80 mmWeight 1.3 kg (solo)No. 702274

A

axMInStER WooDtURnInG CHUCk, EVoLUtIon Sk114 SoLo Model M33 x DIn 800Ø 114 mmNo. 702238

C

D

1 2 3

F

G

G CHUCk REMoVaL SPannER For detaching the woodturning chuck from the spindle thread.

Fits woodturning chucks Clubman Sk100 / Sk80.No. 702264

Evolution Standard

B

E

B ExtEnDED kEY FoR axMInStER WooDtURnInG CHUCk this extended hook wrench allows quick and easy handling of large-diameter items. Fits axminster Woodturning Chuck Evolution Sk114. Square 9 x 9 mm. Size 240 mmNo. 702278

C UnIVERSaL JaWS FoR axMInStER EVoLUtIon Jaws with formed ridge for attaching axminster accessories. axminster chucks come with jaws, but a separate set of universal jaws makes swapping accessory jaws much quicker. the accessory jaws do not have to be detached from the jaws each time you change the workpiece. Set consisting of four jaws. Fits woodturning chuck Evolution Sk114, no. 702238. No. 702273

E ExtEnDED kEY FoR axMInStER WooDtURnInG CHUCk the extended key allows quick and easy handling of large-diameter items.Fits axminster Woodturning Chuck Clubman Sk100 und Sk80.Size 175 mmNo. 702277

3 Axminster Woodturning Chuck Clubman SK100, with type C JawsModel M33 x DIn 800External chucking 56-81 mm Internal chucking 69-94 mm Ø 100 mmWeight 1.6 kg (solo)No. 702240

Chucks

these jaws sit deeper in the chuck and offer a greater contact area within the slide ways of the chuck, thus minimising vibration during use.

Indexing is achieved by 24 peripheral slots and 36 holes on the chuck back plate, giving the option of 10° or 15° indexing.

A axMInStER WooDtURnInG CHUCk EVoLUtIon Sk114this chuck features a super-slim stain-less steel body incorporating a new de-sign of longer accessory mounting jaws.Max. jaw movement 22 mm (plus safety capacity). Fully compatible with all axminster jaws. Includes chuck key for one-handed operation.

the ultra-compact design keeps the workpiece as close as possible to the headstock of your lathe to lessen the load on the bearings and prevent unwanted vibration.

Axminster Chucksaxminster has been producing 4-jaw chucks for woodturning lathes since 1984. the English company offers a suitable chuck size for every application, not to mention excellent value for money. the chucks along with all accessories are made in England on CnC machines and have been developed over years working closely with experienced turners.

Chucks

www.sparks-shop.eu

26

A axMInStER ExPanDInG DoVEtaIL CHUCk JaWS, tYPE D80 the dovetailed outsides provide a secure grip e.g. on recessed small bowls or cases. the smooth jaw surface does not leave any marks on highly sensitive materials.

E

1 2

D

C

1 2 3

D axMInStER DoVEtaIL JaWS, SMaLL non-serrated jaw type for gentle clamping. the smooth jaw surface does not leave any marks on highly sensitive materials. Holds workpieces both by clamping the outside or expanding on the inside of the workpiece. the insides are suitable for all standard clamping situations, while the dovetailed outsides provide a secure grip, e.g. on recessed bowls.

E axMInStER DoVEtaIL JaWS,tYPE Cone of the most versatile and popular jaw sets. Gentle clamping with non- serrated dovetail jaws. Round work- pieces can be clamped particularly gently because of the smooth jaw surface. the insides of the jaws are ideal for clamping screw chucks and faceplate rings. Suitable for medium-weight workpieces.

C axMInStER DoVEtaIL JaWS, LaRGEGentle clamping with non-serrated dove-tail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. the dovetail shape is ideal for clamping at bowl recesses as well as screw chucks and faceplate rings. Suitable for medium-weight workpieces.

A B

B axMInStER GRIPPER JaWS, tYPE H80 the serrated insides and outsides of the jaws hold workpieces by clamping or ex-panding on the inside of the workpiece.

GF

1 21 2

For safety, the maximum jaw move-ment is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws.

Axminster Jaws for Clubman SK80

Axminster Jaws for Evolution and Clubman SK100also fits Goliath and previous models.

1 type D Chuck External chuck. Internal chuck.Goliath 12-58 mm 25-71 mmClubman Sk100 12-37 mm 25-50 mmEvolution 12-34 mm 25-47 mmNo. 702247

2 type FChuck External chuck. Internal chuck.Goliath 19-65 mm 38-84 mmClubman Sk100 19-44 mm 38-63 mmEvolution 19-41 mm 38-60 mmNo. 702248

Chuck External chuck. Internal chuck.Goliath 56-102 mm 69-115 mmClubman Sk100 56-81 mm 69-94 mmEvolution 56-78 mm 69-91 mmNo. 702246

1 type A Chuck External chuck. Internal chuck.Goliath 25/60-71/106 mm 100-146 mmClubman Sk100 25/60-50/85 mm 100-125 mmEvolution 25/60-47/82 mm 100-122 mm

No. 702244

3 type MChuck External chuck. Internal chuck.Goliath 100-146 mm 125-171 mmClubman Sk100 100-125 mm 125-150 mmEvolution 100-122 mm 125-147 mmNo. 702252

2 type BChuck External chuck. Internal chuck.Goliath 25-71 mm 62-108 mmClubman Sk100 25-50 mm 62-87 mmEvolution 25-47 mm 62-84 mmNo. 702245

1 type BF Chuck External chuck. Internal chuck.Goliath 20-66 mm 36-82 mmClubman Sk100 20-45 mm 36-61 mmEvolution 20-42 mm 36-58 mmNo. 702251

2 type Colossus Chuck External chuck. Internal chuck.Goliath 125-171 mm 150-196 mmClubman Sk100 125-150 mm 150-175 mmEvolution 125-147 mm 150-172 mmNo. 702253

G axMInStER GRIPPER JaWSSpigot jaws for small and medium sized workpieces. the serrated insides and outsides of the jaws hold workpieces by clamping or expanding on the inside of the workpiece.

F axMInStER CoMBInatIon JaWS, tYPE CoLoSSUSthe large jaws hold large workpieces, either by clamping the outside or ex-panding on the inside of the workpiece. the serrated grip on the inside is suitable for all standard clamping situations, and the dovetailed outsides ensure a secure grip, e.g. when clamping bowl feet.

Chuck External chuck. Internal chuck.Clubman Sk80 33-76 mm 48-90 mmNo. 702276

Chuck Internal chuck.Clubman Sk80No. 702275

2 type GChuck External chuck. Internal chuck.Goliath 84-130 mm 104-150 mmClubman Sk100 84-109 mm 104-129 mmEvolution 84-106 mm 104-126 mmNo. 702249

2 type H Chuck External chuck. Internal chuck.Goliath 25/56-71/102 mm 75-121 mmClubman Sk100 25/56-50/81 mm 75-100 mmEvolution 25/56-47/78 mm 75-97 mmNo. 702250

Chucks

For advice and ########################################################## orders call +49 (0)991 9109-902 • www.dictum.com www.sparks-shop.euwww.sparks-shop.eu

27

For safety, the maximum jaw move-ment is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws.

A B

1 2

C

D

E

Model Spigot Jaws Chuck Internal chuck.Goliath 28-74 mmClubman Sk100 28-53 mmEvolution 28-50 mmNo. 702256

B axMInStER SPIGot JaWSthese spigots are ideal for slim work- pieces such as pepper mills and small boxes. they hold blanks securely and reliably in a hole of just 30 mm in diameter.

Size Ø 400 mm (not suited for SK80)Chuck External chuck. Internal chuck.Clubman Sk100 78-345 mm 122-385 mmEvolution 81-388 mm 124-435 mmNo. 702260

D axMInStER BUtton JaWS WItH 8 RUBBER BUttonS the eight flexible sliding rubber buttons allow you to clamp irregular-shaped workpieces securely without damaging the edges of the workpiece. Suitable for turning bowls, even without a recess. to allow larger segments, the jaws are made of aluminium, which minimises centrifu-gal forces compared with steel segments. the clamping force of the clamping buttons is limited by the design.

Size Ø 250 mm Chuck External chuck. Internal chuck.Clubman Sk80 66-218 mm 113-266 mmClubman Sk100 70-220 mm 113-266 mmEvolutionNo. 702259

66-218 mm 113-266 mm

E axMInStER WooD JaW PLatESFour steel segments that hold custom-designed wooden jaws. Fits axminster 4-jaw chucks with universal jaws: Clubman Sk80 / Sk100, Evolution Sk114 and Goliath.

Size Ø 100 mm No. 702257

Size Ø 150 mm No. 702258

C axMInStER FaCEPLatEthis solid steel faceplate is used for mounting open-worked workpieces or those with a larger diameter or irregular shape. Model M33 x DIn 800

Ø 75 mm steel faceplate with one ring of timber-mounting holes No. 702261

Ø 100 mm steel faceplate with two rings of timber-mounting holes No. 702262

Ø 150 mm steel faceplate with three rings of timber-mounting holes No. 702263

A axMInStER LonG CYLInDER JaWS these special 50 mm long jaws are ideal for long and thin workpieces such as boxes, cups and vases. the jaws hold the workpiece securely and accu-rately along the full length of the spigots in the direction of the axis. the dovetails also allow you to clamp shorter workpie-ces at their recesses, e.g. bowls.

1 Ø 25 Chuck External chuck. Internal chuck.Goliath 25-71 mm 60-106 mmClubman Sk100 25-50 mm 60-85 mmEvolution 25-47 mm 60-82 mmNo. 702254

2 Ø 50 Chuck External chuck. Internal chuck.Goliath 50-96 mm 65-111 mmClubman Sk100 50-75 mm 65-90 mmEvolution 50-72 mm 65-87 mmNo. 702255

Chucks

www.sparks-shop.eu

28

A onEWaY CHUCk, taLon the oneway talon chuck is a self cen-tering 4 jaw chuck. Suitable for almost all turning needs, it is the standard chuck for the turner. Recommended for woodturning lathes with a swing up to 200 mm. the set contains a taper lock adapter, premium profiled jaws size 2, chuck key, woodworm screw, hex key. Different taper lock adapter are available upon request.Jaws size 2: external chucking 36–71 mmInternal chucking 51–86 mm.

Model M33 x 3.5 DIN 800 Ø 85 mmNo. 702159

Modell 1 inch x 8 tpi Ø 85 mmNo. 702160

B onEWaY CHUCk, StRonGHoLD the advantage of this self centering 4 jaw chuck lies in its heavy design. Suitable for large objects, this chuck offers security in almost all clamping situations. Recommended for woodtur-ning lathes with a swing from 200 mm on. the set contains a taper lock adapter, premium profiled jaws size 2, chuck key, woodworm screw, hex key. Different taper lock adapter are available upon request. Jaws size 2: external chucking 44–82 mm Internal chucking 60–101 mm.Model M33 x DIn 800Ø 105 mmNo. 702158

Oneway Chucksall chucks of the trademark oneway are produced in Canada to guarantee high quality and accuracy. For both chucks talon and Stronghold many accessories are available, from which you can choose according to your needs. the bodys are manufactured in one continuous operation in order to guar-antee the highest-possible true running-accuracy.

B

It is easy to handle single-handed with the help of the included chuck key. this way you can use your other hand to position the workpiece.

the body, manufactured out of one piece, is low vibrating and rotates accurately. a nickel coating protects the chuck from rust.

the case hardened jaw slides, made from chrome-nickelsteel, are extremely wear- resistant and run smoothly and exactly in the toothed guiding.

A

Other adapter needed? - No problem!We have a whole series of special adapter on request.

Chucks

www.sparks-shop.eu

29

How to find the appropriate Oneway adapter for your lathe

Table 1: Metric thread

Ø in mm Gap in mm from thread crestto thread crest

Metric thread sizes

18 2.5 M18 x 2,5

20 2 M20 x 2

20 1.5 M20 x 1,5

24 3 M24 x 3

25 2 M25 x 2

30 1.5 M30 x 1.5

30 3.5 M30 x 3.5

33 3.5 M33 x 3.5 DIn 800 standard on most lathes

40 6 M40 x 6 e.g. sweden

Table 2: Inch thread

Thread diameter tpi or pitch in mm Inch thread sizes

Ø in mm Ø in inches Number ofthreads perinch (tpi)

Gap in mmThread crestto thread crest

12.700 1/2“ 20 1.27 1/2 inch x 20 tpi

19.050 3/4“ 16 1.59 3/4 inch x 16 tpi UnF

19.050 3/4“ 14 1.81 3/4 inch x 14 tpi BSP

19.050 3/4“ 10 2.54 3/4 inch x 10 tpi BSW

22.225 7/8“ 14 1.81 7/8 inch x 14 tpi nF

25.400 1“ 12 2.12 1 inch x 12 tpi

25.400 1“ 10 2.54 1 inch x 10 tpi BSF

25.400 1“ 8 3.18 1 inch x 8 tpi Dual thread LH/RH

25.400 1“ 8 3.18 1 inch x 8 tpi UnC

28.575 1 1/8“ 12 2.12 1 1/8 inch x 12 tpi UnF

28.575 1 1/8“ 7 3.62 1 1/8 inch x 7 tpi BSW

28.575 1 1/8“ 7 3.62 1 1/8 inch x 7 tpi UnC

31.750 1 1/4“ 8 3.18 1 1/4 inch x 8 tpi UnS

38.100 1 1/2“ 6 4.23 1 1/2 inch x 6 tpi BSW RH/LH

38.100 1 1/2“ 8 3.18 1 1/2 inch x 8 tpi nF

Why you should always measure the thread of your spindlesthere are many lathes on the market and they all have different thread sizes on the main spindle. to obtain the appropriate accessories (e.g. faceplates, woodturning chucks or adapters), it is vital to know the thread size of the main spindle.

Required measuring toolsa metric precision calliper with 1/10 display accuracy or a calliper with inch display.Before measuring the thread, check in the manufacturer‘s manual or operating instructions whether youcan obtain information on the thread from them. If necessary ask the manufacturer. Information on the model, and where appropriate the year of manufacture of the lathe will be very helpful. If no information on the thread size is available, proceed as follows:

1. Measuring the outer diameter of the threadIn this instance it is important to determine whether the thread is a metric or an inch thread.one inch equals 25.4 mm. a 25.0 mm thread would therefore be a metric thread (for metricthread sizes see table 1). It is very important to measure carefully here and read the measurement off accurately.For outer thread diameters see Illustration 3, measurement a.typical metric threads are: M18, M20, M24, M25, M30, M33, M40. If you find diameters with decimal places, the thread is an inch thread. the mm - inch conversion can be found intable 2.

2. Measuring the thread pitchWith a metric thread this is the gap from thread crest to thread crest (see Illustration 2);for thread pitch see Illustration 3, measurement B.In the case of an inch thread it is the number of thread crests (also called turns) per inch, i.e. per 25.4 mm, which is determined. this is described as tpi (threads per inch).

3. Measuring the flangeWith some machines the flange can have a greater diameter than the thread itself. Measure the diameter of the flange as well (see Illustration 3, measurement C).

4. Determining the thread‘s direction of rotationWith a RH (right-hand) thread the thread flanks rise towards the right when viewed from above,and with a LH (left-hand) thread towards the left.It is also possible to have RH/LH threads that are cut twice.

Illustration 2

Illustration 3

Illustration 1

Additional InformationThread form or flank angle of thread turn

• UNC, UNF /NF and metric threads(also called ISo threads) have a60° angle

• Whitworth, BSW, and BSF threads havea 55° angle

Metric or ISO Thread UNC (Unified national Coarse thread)Designation e.g.: M33 x 3.5 means: Diameter 33 mm, pitch 3.5 mm.Designation e.g.: 1“ - 8 UnC means: Diameter 1 inch - 8 turns per inch thread length.

UNF / NF (Unified National Fine Thread)BSW (British Standard Whitworth Coarsethread) or Whitworth

Designation e.g.: 3/4“ - 16 UnF means: Diameter 3/4 inch - 16 turnsper 1 inch thread length.

Designation e.g.: 3/4“ - 10 BWS means: Diameter 3/4 inch - 10 turnsper 1 inch thread length.

BSF (British Standard Fine thread)

Designation e.g.: 1“ - 10 BSF means:Diameter 1 inch - 10 turns per inch thread length.

29

Chucks

www.sparks-shop.eu

www.sparks-shop.eu

30

B onEWaY toWER JaWS, PREMIUM PRoFILED SERRatEDtower jaws will excel when it comes down to turning long pieces without tailstock support. It is possible to fix workpieces by clamping or spreading them. the serration on the inside of the jaws safely fixes the workpiece. the shape of the inner jaws is not completely round but angled. this patented design enables the jaws to safely clamp square stock and minimises the damage of the surface. the jaws also have more contact points than conventional serrated jaws when clamping round stock. this enables a higher clamping force.

Model talon Size External chucking Internal chucking

1 2 34–70 mm 50–88 mm No. 702149 2 3 81–119 mm 97–135 mm No. 702151

Model Stronghold Size External chucking Internal chucking

1 2 47–88 mm 68–112 mm No. 702130 2 3 88–130 mm 110–152 mm No. 702132

D onEWaY SPIGot JaWS, PREMIUM PRoFILED SERRatEDFor clamping smaller pieces these spigot jaws are the right choice. It is possible to fix workpieces by clamping or spreading them. the serration on the inside of the jaws safely fixes the workpiece. the shape of the inner jaws is not completely round but angled. this patented design enables the jaws to safely clamp square stock and minimizes the damage of the surface. the jaws also have more contact points than conventional serrated jaws when clamping round stock. this enables a higher clamping force.

Model talon External chucking Internal chucking

1 6–42 mm 26–62 mm No. 702142

Model Stronghold External chucking Internal chucking

2 7–51 mm 27–71 mm No. 702121

A onEWaY JaWS, PREMIUM PRoFILED SERRatEDSerrated jaws are used during all standard clamping situations. It is possible to fix workpieces by clamping or spreading them. the serration on the inside of the jaws safely fixes the workpiece. the shape of the inner jaws is not completely round but angled. this patented design enables the jaws to safely clamp square stock and minimizes the damage of the surface. the jaws also have more contact points than conventional serrated jaws when clamping round stock. this enables a higher clamping force.

Model talon Size External chucking Internal chucking3 70–105 mm 85–120 mm No. 702146

Model Stronghold Size External chucking Internal chucking3 93–136 mm 110–153 mm No. 702125 4 108–151 mm 122–166 mm No. 702127

the oneway chuck jaws are equipped on the underside with a guide pin which engages with a guide groove in the body of the chuck. this is an important safety feature.Inadvertent unscrewing or exceedingthe maximum clamping distance could in the worst case lead to flyingjaw parts.

Jaws for Talon and Stronghold

Model Stronghold External chucking Internal chucking8–53 mm 26–68 mm No. 702122

C

C onEWaY SPIGot JaWS, DoVEtaIL PRoFILEFor clamping smaller pieces these spigot jaws are the right choice. It is possible to fix workpieces by clamping or spreading them. the outside and inside surface of the jaws is smooth and not serrated. this enables you to gently clamp round workpieces. only low clamping force can be practiced due to the non-serrated inside surface.

Model talon External chucking Internal chucking6-42 mm 29-65 mm No. 702143

A B 2

1

D 2

1

Chucks

www.sparks-shop.eu

31

A onEWaY DoVEtaIL JaWSthe outside and inside surface of the jaws is smooth and not serrated. this enables you to gently clamp round workpieces. only low clamping force can be practiced due to the non-serrated inside surface.

Model talon Size External chucking Internal chucking

1 2 36–71 mm 52–87 mm No. 702145 2 3 65–100 mm 85–120 mm No. 702147

Model Stronghold Size External chucking Internal chucking

1 2 45–90 mm 63–106 mm No. 702124 2 3 90–133 mm 110–153 mm No. 702126 3 4 101–145 mm 122–166 mm No. 702128

C onEWaY FaCEPLatE SEGMEntSthese segments make it possible to clamp complex shapes in order to finish them, e.g. pieces without stub. no matter, whether you have to work round, oval or angled pieces, the movable rubber nubs keep hold of each workpiece. the clamping force is limited due to the construction of the jaws. In order to achieve larger dimensions of the segments they have been produced out of aluminium. this way the centrifugal forces are minimized compared to steel segments.

Model talon Size External chucking Internal chucking1 51–200 mm 101-251 mm No. 702152 2 73–273 mm 124-298 mm No. 702153

Model Stronghold Size External chucking Internal chucking1 76–216 mm 127-257 mm2 70–279 mm 120-305 mm3 44–355 mm 120-381 mm

No. 702133No. 702134 No. 702135

A

B

C

External chucking

Internal chucking

OVERVIEW ONEWAY JAWS

Chucking ranges Talon Stronghold

External chucking

min

External chucking

max

Internal chucking

min

Internal chucking

max

External chucking

min

External chucking

max

Internal chucking

min

Internal chucking

max

Spigot Jaws, Premium Profiled Serrated No. 702142 6 mm 42 mm 26 mm 62 mm No. 702121 7 mm 51 mm 27 mm 71 mm

Spigot Jaws, Dovetail Profile No. 702143 6 mm 42 mm 29 mm 65 mm No. 702122 8 mm 53 mm 26 mm 68 mm

Dovetail Jaw # 2 No. 702145 36 mm 71 mm 52 mm 87 mm No. 702124 45 mm 90 mm 63 mm 106 mm

Premium Profiled Serrated Jaws # 3 No. 702146 70 mm 105 mm 85 mm 120 mm No. 702125 93 mm 136 mm 110 mm 153 mm

Dovetail Jaw # 3 No. 702147 65 mm 100 mm 85 mm 120 mm No. 702126 90 mm 133 mm 110 mm 153 mm

Premium Profiled Serrated Jaws # 4 No. 702127 108 mm 151 mm 122 mm 166 mm

Dovetail Jaw # 4 No. 702128 101 mm 145 mm 122 mm 166 mm

Tower Jaws # 2, Premium Profiled Serrated No. 702149 34 mm 70 mm 50 mm 88 mm No. 702130 47 mm 88 mm 68 mm 112 mm

Tower Jaws # 3, Premium Profiled Serrated No. 702151 81 mm 119 mm 97 mm 135 mm No. 702132 88 mm 130 mm 110 mm 152 mm

Faceplate Segments # 1 No. 702152 50 mm 200 mm 100 mm 250 mm No. 702133 52 mm 204 mm 104 mm 256 mm

Faceplate Segments # 2 No. 702153 62 mm 262 mm 114 mm 314 mm No. 702134 62 mm 275 mm 115 mm 326 mm

Faceplate Segments # 3 No. 702159 36 mm 71 mm 51 mm 86 mm No. 702135 68 mm 348 mm 120 mm 400 mm

B onEWaY FLat JaWS FoR InDIVIDUaL CLaMPInG SItUatIonSWooden blocks are screwed to the face of the jaws which are then turned. this way you are able to make your own custom grip jaw set.

Model talon Size Ø 150 mmNo. 702154

Model Stronghold Size Ø 165 mmNo. 702136

2 / 3

1

Chucks

www.sparks-shop.eu

the Robert Sorby company has been known for its range of high-quality woodworking tools for over 200 years. In Sheffield, England, traditional working methods are combined with technical expertise. this guarantees sophisticated tools with a quality that speaks for itself.

32

A SoRBY™ ECCEntRIC CHUCk RS60the excenter chuck from Sorby allows you to turn countless detailed and un-usual figures and shapes with complete safety and precision. It is possible to produce items in batches thanks to precise repeatability. the axle offset can be set and read with infinite variability from 0 to 35 mm. the Sorby excenter chuck makes use of a counterweight to keep the workpiece as balanced as possible. this provides more stability, protects the stock and reduces the risk of an accident. the three well-engineered clamping methods (with the help of the included face chuck, screw bolt and hexagonal nozzle) gives you great flexi-bility. Working without a tailstock is also possible. Reversed German and English operating instructions from DICtUM.

Model M33 x DIN 800 Ø 100 mmNo. 720382

Model 1 inch x 8 tpi With adapter suitable for 1 inch x 8 tpi threads. Ø 100 mmNo. 720425

C onEWaY SPUR DRIVER For use on lathes with hollow spindles to clamp workpieces for spindle turning. the springloaded point is adjustable in length via a set screw.Morse taper #2 MTØ 25.4 mm overall length 115 mm No. 702123

D axMInStER SPUR DRIVER, Standard spur driver for spindle turning. Ø 25.4 mmoverall length 100 / 115 mmMorse taper#2 MT No. 702269 #3 MT No. 702270

CD

B HaGER REVoLVInG CEntRE one bearing, the whole head rotates. Shaft diameter 20 mmMorse taper #3 MT overall length 130 mmNo. 705547

B

Chucks

Face chuck Screw bolt Hexagonal nozzle

A

Chucks

Springloaded

point

www.dictum.com

Application video available online.

Vide

www.sparks-shop.eu

www.sparks-shop.eu

33

D onEWaY LIVE CEntRE SYStEM this system is based on a two-bearing live centre with a cutting ring and a threaded shaft onto which you can fit different attachments including self-made ones. Comes with a cone that can be used on both the inside and outside of turnings, as well as a large point and knockout rod. Cone diameter 90 mm, Point diameter 45 mm.

Morse taper#2 MT No. 702137 #3 MT No. 702138

E qUICk-RELEaSE CHUCk ECo WItH MoRSE taPER Good value for money. quick-Release Chuck for craft and hobby use. For use on lathes, power routers and vertical drilling machines. Self-tightening and high-force clamping. no chuck key, tight-en and release effortlessly by hand. Jaw opening 0.5-16 mm, jaws can be fully

opened and close without gaps. Con-centricity 0.08 mm, B16 taper shank, internal taper DIn 238. For clockwise rotation.overall length 215 mmMorse taper#2 MT No. 705658 #3 MT No. 705659

F HEUREka CHUCk WItH 3 RInGS For all soft to medium hardwoods. Be-cause the chuck rings only penetrate the wood to a reduced depth, the workpieces can be driven on directly. this reduces the extra length required and thus also material waste. M33 x 3.5 DIn 800 internal thread. With 3 cutting rings. Incl. wedge for removing the workpiece.No. 705569

E F

B SoRBY™ StEB CHUCk DRIVER Saves time and effort:the Sorby Step Driver can be easily placed and clamped on your current chuck. the need for time-consuming modi- fications is gone. Fits Oneway chucks talon no. 702160 and Stronghold no. 702158.overall length 50 mm

Ø1 13 mm No. 720377 2 22 mm No. 720378 3 32 mm No. 720376

C SoRBY™ REVoLVInG StEBCEntRE, #2 Mt Largely inspired by norwegian turner Petter Herud, the Revolving Stebcentre has been introduced. not only does it offer the same degree of security as the conventional Stebcentre, but it allows the turner to do basic off-centre turning.Morse taper #2 MToverall length 130 mm

Ø1 13 mm No. 720381 2 22 mm No. 720379 3 32 mm No. 720380

B

C

1

Robert Sorby™ clamping devicesthe sprung stainless steel tip and sharp teeth that bite into the wood will guarantee optimal hold. this works even on lathes where the axles (spindle stock to tailstock) are not 100 % aligned. Safe working is guaranteed. the geometry of the teeth also makes this exceptionally good for tensioning unusual shapes. to do this, the piece is tensioned between the Sorby revolving stepcentre and a Sorby driver.

A SoRBY™ StEBCEntRE SPUR DRIVER, #2 Mt overall length 100 mm

Ø1 13 mm No. 720375 2 22 mm No. 720374 3 32 mm No. 720373 A 1 2 3

1

2

2

3

3

D

Chucks

www.sparks-shop.eu