cincinnati press brake accessories · pdf filecincinnati press brake accessories prices f.o.b....
TRANSCRIPT
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop – Harrison, Ohio
STANDARD FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 12” centers starting 6” in from the end. 540” wide die slot dropped
UNIVERSAL NARROW FLAT TOP
3-1/4” 3-5/8” 5-1/4” 2-1/2” 4” 5”
OVERALL LENGTH
Wider die slot. .530”
4’ $160 $ 1,630 $ 1,940 N / A $ 1,130 $ 1,320 N / A 6’ 180 1,890 2,110 N / A 1,290 1,550 N / A
8’ 200 2,100 2,360 $ 2,950 1,490 1,710 $ 2,030
10’ 220 2,520 2,690 3,540 1,670 1,900 2,370
12’ 240 2,810 3,240 4,080 1,870 2,240 2,610
14’ 260 3,160 3,700 4,940 2,010 2,540 3,110
16’ 280 3,540 4,130 5,760 2,430 2,920 3,630
18’ 300 3,920 4,660 6,580 2,750 3,400 4,030
20’ 320 4,280 5,190 7,140 3,080 3,740 4,480
CONSULT FACTORY for pricing of filler blocks longer than 20’
Notes: “CBII”, “PF”, “FMII”, “AF+” and “MX” Press Brakes have “C” nuts to fasten filler block to the bed. Press Brakes larger than 350 ton use tee nuts. The exception is AUTO CROWN® beds which require “C” nuts. Replacement Filler Blocks may be “special priced” if holddown pockets are not standard spacing.
OVERALL LENGTH
Additional Set Screws 1” centers
Max load capacity 7.5 tons/sq. in 2” centers 3” centers 4” centers 6” centers
4’ $1,320 $ 600 $ 360 $ 240 $ 120 6’ 1,980 900 540 360 180 8’ 2,640 1,200 720 480 240
10’ 3,300 1,500 900 600 300 12’ 3,960 1,800 1,080 720 360 14’ 4,620 2,100 1,260 840 420 16’ 5,280 2,400 1,440 960 480 18’ 5,940 2,700 1,620 1,080 540 20’ 6,600 3,000 1,800 1,200 600
Additional Set Screws evenly spaced over overall length........................................................................................... $ 30 / screw If additional set screws are required, the price is for each additional hole, provided the centerlines for this pattern are evenly divisible into 12”.
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 2 of 8 VALID 1/1/18 – 3/31/18
US/EURO FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 3.937” (100mm) centers. Additional Set Screws not available.
STANDARD
LOW PROFILE
60mm
LOW PROFILE 4”
For Retrofit Application
OVERALL LENGTH
Wider die slot.
530”
4’ $160 $ 1,590 $ 1,720 $ 1,720
6’ 180 1,790 1,930 1,930
8’ 200 2,010 2,170 2,170
10’ 220 2,240 2,420 2,420
12’ 240 2,430 2,620 2,620
14’ 260 2,780 2,990 2,990
16’ 280 3,210 3,470 3,470
Notes
Die slot machined for .500” wide (American) tongues. Longer US/Euro filler blocks are not available. Press Brake Price Pages include standard US/Euro Filler Block in the Cincinnati Quick Tool Change price. 540” wider die slot dropped
Clamp plates for US/EURO filler block .............................................................................................. $ 70 / pair Front and Rear clamps used to hold 60mm wide European 1v / 2v die holders and large European dies
without a tongue. A price request is required for use on Goform press brakes with front work supports
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
FAST SETUP WORK SUPPORTS FOR CINCINNATI PRESS BRAKES
Note: Cannot be used with accessories or options that bolt to the front dovetail slot, i.e. Sheet Follower System
Fast Setup Work Supports Note: using fast setup work supports overall length of bed will interfere with die aligners and other dovetail mounted accessories
4’ of track
6’ of track
8’ of track
10’ of track
12’ of track
14’ of track
16’ of track
Two Fast Setup Work Supports, 15” slides with track to mount to front dovetail slot in bed
$4,200
$4,800
$5,400
$6,000
$6,600
$7,200
$7,800
24” slides, in place of 15”
$400
$400
$400
$400
$400
$400
$400
End Stop Kit Bolts on top of work support. Used as an
end stop at the end of a die for tapered bends. Includes one 1.15” high end stop
block, one 1.15” high spacer block, and four socket head cap screws.
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
1” Spacer Kit required when filler block or lower die directly
on the bed is wider than bed top by ¼”
$560
$840
$1,120
$1,400
$1,680
$1,960
$2,240
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 4 of 8 VALID 1/1/18 – 3/31/18
Standard Gages and Work Supports (G Series)
Standard Gages With Micrometers (Adjustment to the Gage Rod)
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G10 15’’…….…...…..…………………………………………………………………….……………….……………$ 1,820 G11 24’’………………….………………………………………………………………….………….………………..$ 1,970 G12 36’’……………………..……………………………………………………………….…………………………..$ 2,040
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G10 15’’……………………………………….…………………………………………………………………………$ 2,370 G11 24’’……………………………………..…………………………………………………………………………...$ 2,500 G12 36’’……………………………………………………………………………………………..…………………...$ 2,690
Standard Gages Without Micrometers
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G15 15’’.………………………………………………………………………………………………………………..$ 1,250 G16 24’’.………………………………………………………………………………………………………………..$ 1,400 G17 36’’.…………………...………………………….………………………………………………………………..$ 1,480
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G15 15’’…………………………………………………………………………………………………….……..……$ 1,790 G16 24’’….……………………………….…………………………………………………………………………….$ 1,950 G17 36’’….……………………………………………….…………………………………………………………….$ 2,030
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
Heavy Duty Gages
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G20 24’’…….…...……………..……………………………………………………………………………………..$ 1,080 G21 36’’…..…………….………..……………...…………………………………………………………………....$ 1,250 G22 48’’…………………………………….…………………………………………………………………………$ 1,410
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G20 24’’………….……………………….…………………………………………………………………………..$ 1,610 G21 36’’……………….………………….…………………………………………………………………………..$ 1,790 G22 48’’……………….…………………….………………………………………………………………………..$ 1,940
Heavy Duty Gages With Gage Rod
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS(Price Per Pair) G25 24’’…….…...…………………..…….………………………………………………………………………...$ 1,310 G26 36’’……………………..……………………………………………………………………………………….$ 1,470 G27 48’’……………………..……………………………………………………………………………………….$ 1,640
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G25 24’’…………………….….……….……………………………………………………………………………$ 1,870 G26 36’’…………………….………..………………………………………………………………………………$ 2,410 G27 48’’…………………….………..………………………………………………………………………………$ 2,540
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 6 of 8 VALID 1/1/18 – 3/31/18
Heavy Duty Work Support Brackets
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G60 24’’.…………………...……………………………………………………………………….…….…………..$ 970 G61 36’’.…………………...……………………………………………………………………………..…………..$ 1,200 G62 48’’.…………………...…………………………………………………………………………………………$ 1,428
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G60 24’’…………………….…………………………….……………………………………………………………$ 1,770 G61 36’’….……………………………………………………….……………………………………………………$ 1,740 G62 48’’………….…………………………………………………….………………………………………………$ 1,970
Heavy Duty Work Support Brackets with Double Dovetail Gage Arms
NOTE: PRICES DO NOT INCLUDE FLIP GAGES SHOWN IN PICTURE. SEE PATE 8 FOR FLIP AND PIN GAGES.
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G30 24’’.…………………...……………………………………………………………………….…….……………$ 1,420 G31 36’’.…………………...……………………………………………………………………………..……………$ 1,780 G32 48’’.…………………...…………………………………………………………………………………………..$ 1,940
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G30 24’’…..……………….…………………………….…………………………………………………………….$ 1,970 G31 36’’…...…………………………………………………….…………………………………………………….$ 2,300 G32 48’’.....…….…………………………………………………….……………………………………..………...$ 2,480
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
Flip Gage (5/16 Rise)
#G40 Price Per Gage Note: Mounts on Dovetail Gage Arm
G40……………………….….$ 100 Note: Mounts on Dovetail Gage Arms
Flip Gage (5/8 Rise) #G41 Price Per Gage
G41……………………….….$ 130 Note: Mounts on Dovetail Gage Arms
Spring-Loaded Pin Gage (Capacity 3/16’’– 3/4’’ Hole)
#G46 Price Per Gage G46………………………….$ 280 Note: Mounts on Dovetail Gage Arms
Micro Adjuster (for Flip Gages or Pin Gages) #G42 Price Per Gage
G42……………….………….$ 520 Note: Mounts on Dovetail Gage Arms
Setup Gage (Price Per Gage)……………………..$ 190
Adjustable Support Stand #G50 Price Per Pair
G50…………………………...……….$ 370 Note: Required for Dovetail Gage Arm 4’ and Greater
Die Aligners (For Aligning Filler Blocks and dies without tongues on the Bed. Designed to Fit Dovetail Slots in Standard Bed) Price Per Set of Six………………………………$ 460
Lifting Device (For Turning Four way Dies)
Inside Mounted (Used when 4-way die is less than overall length)
Price Per Set of Two…………………………….$ Note: Specify Height of Upper Die when ordering
420
Outside Mounted (Used when 4-way die is same as overalll length) Price Per Set of Two…………………………….$
250
Note: Specify Height of Upper Die when ordering Includes 2 pins for welding to Ram
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 8 of 8 VALID 1/1/18 – 3/31/18
ANGLE BRACKETS FOR CINCINNATI PRESS BRAKES
STANDARD ANGLE BRACKETS
HEIGHT x WIDTH 4' LENGTH 6' LENGTH 8’ LENGTH
5-3/4" x 5-3/4"……………………………………………………………………………$ 1,920/pair $ 2,940/pair $ 3,900/pair
7-3/4" x 7-3/4"……………………………………………………………………………$ 2,330/pair $ 3,750/pair $ 4,660/pair
12” x 12”………………………………………………………………………………….$ 4,560/pair $ 6,840/pair $ 9,120/pair
CUSTOM ANGLE BRACKETS
HEIGHT x WIDTH PRICE (Minimum of 4 feet)
5-3/4" x 3-3/4".................................................................................................................. $ 270 per linear foot of angle bracket
5-3/4" x 5-3/4".................................................................................................................. $ 270 per linear foot of angle bracket
7-3/4" x 7-3/4".................................................................................................................. $ 310 per linear foot of angle bracket
12” x 12".......................................................................................................................... $ 570 per linear foot of angle bracket
Saw 4' length angle bracket in half to obtain two 2' lengths.....................................................................................$ 60/each
NOTES:
Consult Factory for angle brackets longer than 8’ (one-piece).
Angle brackets are normally used on front and back of the bed and /or ram, and therefore should be sold in pairs.
Angle brackets are intended for use between housings, 2’ shorter than nominal machine length.
Mounting holes are on 6" centerlines on both the horizontal and vertical legs.
Angle brackets for use with 90 thru 350 ton press brakes are supplied with mounting bolts for 12" centers.
Angle brackets for use with 400 ton and larger press brakes are supplied with mounting bolts for 6" centers.
Angle brackets may not be compatible with press brake equipped with CNC backgaging. Consult factory prior to quoting.
Nominal length angles on 350 ton press brake, either one-piece or in sections to cover the nominal length of the bed and ram, require notching and are available at special prices.
Full length angles, either one-piece or in sections to cover the entire length of bed and ram, are available for some models at special prices.
Older machines may have different mounting hole locations. Consult factory for prices and availability.
ADDITIONAL GAGE FINGERS FOR AF, AF+, FMII, PF, PF+, CBII, GX, BX The gage fingers for the SX, CNC, Heavy Duty, 4X, 6-Axis and Plate backgages are 3" long.
Additional gage fingers and assemblies:
425951 adjustable gage finger holder assembly (SX, CNC, Heavy Duty, 4X, or 6-Axis).......................................... $ 580/pair 425952 adjustable gage finger holder assembly (Plate backgage) ................................................................................$ 800/pair 433056 non-adjustable gage finger holder assembly (Plate backgage) .........................................................................$ 800/pair 425953 gage block (Plate backgage)........................................................................................................................ $ 680/pair 425946 standard 1" square gage finger ................................................................................................................ ……$ 60/each 427396 1" square flip gage finger ............................................................................................................................. $ 210/each 425947 standard 1/4" step gage finger .........................................................................................................................$ 80/each 427397 1/4" step flip gage finger .............................................................................................................................. $ 240/each 425948 standard 1/8” step gage finger.......................................................................................................................$ 100/each 425942 set-up tool, hand tool for positioning gage finger holder assembly ...........................................................$ 260/each 429261 special ¼” step non-adjustable precision gage finger holder assembly (SX, CNC, Heavy Duty) .....................$ 560/pair
5-axis gage finger assembly....................................................................................................................................... $1,240/pair Notes: Includes body (431422) with universal finger nose (431285) and related hardware.
Used with 5-axis, 6xLT, 6xGX (Goform) backgages.
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop – Harrison, Ohio
STANDARD FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 12” centers starting 6” in from the end. 540” wide die slot dropped
UNIVERSAL NARROW FLAT TOP
3-1/4” 3-5/8” 5-1/4” 2-1/2” 4” 5”
OVERALL LENGTH
Wider die slot. .530”
4’ $160 $ 1,630 $ 1,940 N / A $ 1,130 $ 1,320 N / A 6’ 180 1,890 2,110 N / A 1,290 1,550 N / A
8’ 200 2,100 2,360 $ 2,950 1,490 1,710 $ 2,030
10’ 220 2,520 2,690 3,540 1,670 1,900 2,370
12’ 240 2,810 3,240 4,080 1,870 2,240 2,610
14’ 260 3,160 3,700 4,940 2,010 2,540 3,110
16’ 280 3,540 4,130 5,760 2,430 2,920 3,630
18’ 300 3,920 4,660 6,580 2,750 3,400 4,030
20’ 320 4,280 5,190 7,140 3,080 3,740 4,480
CONSULT FACTORY for pricing of filler blocks longer than 20’
Notes: “CBII”, “PF”, “FMII”, “AF+” and “MX” Press Brakes have “C” nuts to fasten filler block to the bed. Press Brakes larger than 350 ton use tee nuts. The exception is AUTO CROWN® beds which require “C” nuts. Replacement Filler Blocks may be “special priced” if holddown pockets are not standard spacing.
OVERALL LENGTH
Additional Set Screws 1” centers
Max load capacity 7.5 tons/sq. in 2” centers 3” centers 4” centers 6” centers
4’ $1,320 $ 600 $ 360 $ 240 $ 120 6’ 1,980 900 540 360 180 8’ 2,640 1,200 720 480 240
10’ 3,300 1,500 900 600 300 12’ 3,960 1,800 1,080 720 360 14’ 4,620 2,100 1,260 840 420 16’ 5,280 2,400 1,440 960 480 18’ 5,940 2,700 1,620 1,080 540 20’ 6,600 3,000 1,800 1,200 600
Additional Set Screws evenly spaced over overall length........................................................................................... $ 30 / screw If additional set screws are required, the price is for each additional hole, provided the centerlines for this pattern are evenly divisible into 12”.
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 2 of 8 VALID 1/1/18 – 3/31/18
US/EURO FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 3.937” (100mm) centers. Additional Set Screws not available.
STANDARD
LOW PROFILE
60mm
LOW PROFILE 4”
For Retrofit Application
OVERALL LENGTH
Wider die slot.
530”
4’ $160 $ 1,590 $ 1,720 $ 1,720
6’ 180 1,790 1,930 1,930
8’ 200 2,010 2,170 2,170
10’ 220 2,240 2,420 2,420
12’ 240 2,430 2,620 2,620
14’ 260 2,780 2,990 2,990
16’ 280 3,210 3,470 3,470
Notes
Die slot machined for .500” wide (American) tongues. Longer US/Euro filler blocks are not available. Press Brake Price Pages include standard US/Euro Filler Block in the Cincinnati Quick Tool Change price. 540” wider die slot dropped
Clamp plates for US/EURO filler block .............................................................................................. $ 70 / pair Front and Rear clamps used to hold 60mm wide European 1v / 2v die holders and large European dies
without a tongue. A price request is required for use on Goform press brakes with front work supports
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
FAST SETUP WORK SUPPORTS FOR CINCINNATI PRESS BRAKES
Note: Cannot be used with accessories or options that bolt to the front dovetail slot, i.e. Sheet Follower System
Fast Setup Work Supports Note: using fast setup work supports overall length of bed will interfere with die aligners and other dovetail mounted accessories
4’ of track
6’ of track
8’ of track
10’ of track
12’ of track
14’ of track
16’ of track
Two Fast Setup Work Supports, 15” slides with track to mount to front dovetail slot in bed
$4,200
$4,800
$5,400
$6,000
$6,600
$7,200
$7,800
24” slides, in place of 15”
$400
$400
$400
$400
$400
$400
$400
End Stop Kit Bolts on top of work support. Used as an
end stop at the end of a die for tapered bends. Includes one 1.15” high end stop
block, one 1.15” high spacer block, and four socket head cap screws.
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
$450 ea
1” Spacer Kit required when filler block or lower die directly
on the bed is wider than bed top by ¼”
$560
$840
$1,120
$1,400
$1,680
$1,960
$2,240
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 4 of 8 VALID 1/1/18 – 3/31/18
Standard Gages and Work Supports (G Series)
Standard Gages With Micrometers (Adjustment to the Gage Rod)
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G10 15’’…….…...…..…………………………………………………………………….……………….……………$ 1,820 G11 24’’………………….………………………………………………………………….………….………………..$ 1,970 G12 36’’……………………..……………………………………………………………….…………………………..$ 2,040
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G10 15’’……………………………………….…………………………………………………………………………$ 2,370 G11 24’’……………………………………..…………………………………………………………………………...$ 2,500 G12 36’’……………………………………………………………………………………………..…………………...$ 2,690
Standard Gages Without Micrometers
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G15 15’’.………………………………………………………………………………………………………………..$ 1,250 G16 24’’.………………………………………………………………………………………………………………..$ 1,400 G17 36’’.…………………...………………………….………………………………………………………………..$ 1,480
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G15 15’’…………………………………………………………………………………………………….……..……$ 1,790 G16 24’’….……………………………….…………………………………………………………………………….$ 1,950 G17 36’’….……………………………………………….…………………………………………………………….$ 2,030
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
Heavy Duty Gages
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G20 24’’…….…...……………..……………………………………………………………………………………..$ 1,080 G21 36’’…..…………….………..……………...…………………………………………………………………....$ 1,250 G22 48’’…………………………………….…………………………………………………………………………$ 1,410
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G20 24’’………….……………………….…………………………………………………………………………..$ 1,610 G21 36’’……………….………………….…………………………………………………………………………..$ 1,790 G22 48’’……………….…………………….………………………………………………………………………..$ 1,940
Heavy Duty Gages With Gage Rod
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS(Price Per Pair) G25 24’’…….…...…………………..…….………………………………………………………………………...$ 1,310 G26 36’’……………………..……………………………………………………………………………………….$ 1,470 G27 48’’……………………..……………………………………………………………………………………….$ 1,640
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR (Price Per Pair) G25 24’’…………………….….……….……………………………………………………………………………$ 1,870 G26 36’’…………………….………..………………………………………………………………………………$ 2,410 G27 48’’…………………….………..………………………………………………………………………………$ 2,540
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 6 of 8 VALID 1/1/18 – 3/31/18
Heavy Duty Work Support Brackets
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G60 24’’.…………………...……………………………………………………………………….…….…………..$ 970 G61 36’’.…………………...……………………………………………………………………………..…………..$ 1,200 G62 48’’.…………………...…………………………………………………………………………………………$ 1,428
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G60 24’’…………………….…………………………….……………………………………………………………$ 1,770 G61 36’’….……………………………………………………….……………………………………………………$ 1,740 G62 48’’………….…………………………………………………….………………………………………………$ 1,970
Heavy Duty Work Support Brackets with Double Dovetail Gage Arms
NOTE: PRICES DO NOT INCLUDE FLIP GAGES SHOWN IN PICTURE. SEE PATE 8 FOR FLIP AND PIN GAGES.
CAT NO. SLIDE (A) STANDARD SLIDE BLOCKS (Price Per Pair) G30 24’’.…………………...……………………………………………………………………….…….……………$ 1,420 G31 36’’.…………………...……………………………………………………………………………..……………$ 1,780 G32 48’’.…………………...…………………………………………………………………………………………..$ 1,940
CAT NO. SLIDE (A) SLIDE BLOCKS FOR AUTO CROWNR(Price Per Pair) G30 24’’…..……………….…………………………….…………………………………………………………….$ 1,970 G31 36’’…...…………………………………………………….…………………………………………………….$ 2,300 G32 48’’.....…….…………………………………………………….……………………………………..………...$ 2,480
PRICE LIST No. PB-38 Press Brake Accessories Price List
VALID 1/1/18 – 3/31/18
Flip Gage (5/16 Rise)
#G40 Price Per Gage Note: Mounts on Dovetail Gage Arm
G40……………………….….$ 100 Note: Mounts on Dovetail Gage Arms
Flip Gage (5/8 Rise) #G41 Price Per Gage
G41……………………….….$ 130 Note: Mounts on Dovetail Gage Arms
Spring-Loaded Pin Gage (Capacity 3/16’’– 3/4’’ Hole)
#G46 Price Per Gage G46………………………….$ 280 Note: Mounts on Dovetail Gage Arms
Micro Adjuster (for Flip Gages or Pin Gages) #G42 Price Per Gage
G42……………….………….$ 520 Note: Mounts on Dovetail Gage Arms
Setup Gage (Price Per Gage)……………………..$ 190
Adjustable Support Stand #G50 Price Per Pair
G50…………………………...……….$ 370 Note: Required for Dovetail Gage Arm 4’ and Greater
Die Aligners (For Aligning Filler Blocks and dies without tongues on the Bed. Designed to Fit Dovetail Slots in Standard Bed) Price Per Set of Six………………………………$ 460
Lifting Device (For Turning Four way Dies)
Inside Mounted (Used when 4-way die is less than overall length)
Price Per Set of Two…………………………….$ Note: Specify Height of Upper Die when ordering
420
Outside Mounted (Used when 4-way die is same as overalll length) Price Per Set of Two…………………………….$
250
Note: Specify Height of Upper Die when ordering Includes 2 pins for welding to Ram
PRICE LIST No. PB-38 Press Brake Accessories Price List
Page 8 of 8 VALID 1/1/18 – 3/31/18
ANGLE BRACKETS FOR CINCINNATI PRESS BRAKES
STANDARD ANGLE BRACKETS
HEIGHT x WIDTH 4' LENGTH 6' LENGTH 8’ LENGTH
5-3/4" x 5-3/4"……………………………………………………………………………$ 1,920/pair $ 2,940/pair $ 3,900/pair
7-3/4" x 7-3/4"……………………………………………………………………………$ 2,330/pair $ 3,750/pair $ 4,660/pair
12” x 12”………………………………………………………………………………….$ 4,560/pair $ 6,840/pair $ 9,120/pair
CUSTOM ANGLE BRACKETS
HEIGHT x WIDTH PRICE (Minimum of 4 feet)
5-3/4" x 3-3/4".................................................................................................................. $ 270 per linear foot of angle bracket
5-3/4" x 5-3/4".................................................................................................................. $ 270 per linear foot of angle bracket
7-3/4" x 7-3/4".................................................................................................................. $ 310 per linear foot of angle bracket
12” x 12".......................................................................................................................... $ 570 per linear foot of angle bracket
Saw 4' length angle bracket in half to obtain two 2' lengths.....................................................................................$ 60/each
NOTES:
Consult Factory for angle brackets longer than 8’ (one-piece).
Angle brackets are normally used on front and back of the bed and /or ram, and therefore should be sold in pairs.
Angle brackets are intended for use between housings, 2’ shorter than nominal machine length.
Mounting holes are on 6" centerlines on both the horizontal and vertical legs.
Angle brackets for use with 90 thru 350 ton press brakes are supplied with mounting bolts for 12" centers.
Angle brackets for use with 400 ton and larger press brakes are supplied with mounting bolts for 6" centers.
Angle brackets may not be compatible with press brake equipped with CNC backgaging. Consult factory prior to quoting.
Nominal length angles on 350 ton press brake, either one-piece or in sections to cover the nominal length of the bed and ram, require notching and are available at special prices.
Full length angles, either one-piece or in sections to cover the entire length of bed and ram, are available for some models at special prices.
Older machines may have different mounting hole locations. Consult factory for prices and availability.
ADDITIONAL GAGE FINGERS FOR AF, AF+, FMII, PF, PF+, CBII, GX, BX The gage fingers for the SX, CNC, Heavy Duty, 4X, 6-Axis and Plate backgages are 3" long.
Additional gage fingers and assemblies:
425951 adjustable gage finger holder assembly (SX, CNC, Heavy Duty, 4X, or 6-Axis).......................................... $ 580/pair 425952 adjustable gage finger holder assembly (Plate backgage) ................................................................................$ 800/pair 433056 non-adjustable gage finger holder assembly (Plate backgage) .........................................................................$ 800/pair 425953 gage block (Plate backgage)........................................................................................................................ $ 680/pair 425946 standard 1" square gage finger ................................................................................................................ ……$ 60/each 427396 1" square flip gage finger ............................................................................................................................. $ 210/each 425947 standard 1/4" step gage finger .........................................................................................................................$ 80/each 427397 1/4" step flip gage finger .............................................................................................................................. $ 240/each 425948 standard 1/8” step gage finger.......................................................................................................................$ 100/each 425942 set-up tool, hand tool for positioning gage finger holder assembly ...........................................................$ 260/each 429261 special ¼” step non-adjustable precision gage finger holder assembly (SX, CNC, Heavy Duty) .....................$ 560/pair
5-axis gage finger assembly....................................................................................................................................... $1,240/pair Notes: Includes body (431422) with universal finger nose (431285) and related hardware.
Used with 5-axis, 6xLT, 6xGX (Goform) backgages.