circular connectors signal and 2008 universal - rde … · company and is the specialist for ......
TRANSCRIPT
2008Circular Connectors
Signal andUniversal
Coninvers is an autonomouscompany and is the
specialist for circularconnectors within the PhoenixContact Group. We develop,design and manufacture ourproducts on the site of thecompany headquarters inHerrenberg, south of Stuttgart.
Distribution is carried outworldwide through our ownsales partners and throughPhoenix Contact salescompanies. In the USA, weare represented by our ownsubsidiary – RDE Connectors& Cables, Florida.
Coninvers – Connectors for Industrial Automation
Circular Connectors Signal and Universal
The signal circular connectors are available as 6 to19-position versions in crimp, screw and solderconnection types, as well as for PCB connection (dip solder).
The high quality of our products andservices is the basis for our successful
business operations.
Coninvers management tasks are documented in accordance with
DIN EN ISO 9001: 2000, EN ISO 14001: 2005 and
OHSAS 18001:1999.
3ConinversCircular Connectors Signal / Universal • Edition 02/08
Contents
Coninvers Catalogs
Overview
Coninvers Circular ConnectorsSignal and Universal
Tools and Accessories
Ordering Information
Appendix
Page
The Complete Range at a Glance 5
Coninvers Circular Connectors 6-7
General Information 8-9
M23 Signal Connectors, Product Selection 10-11
M23 Signal Connectors RC / UC Series 12-27
Bayonet Signal Connectors, Product Selection 28-29
Bayonet Signal Connectors, TU Series 30-35
Contact Inserts, 6 to 19 Positions 36-41
42-45
46
Index of Order Numbers 47-48
4 Coninvers Circular Connectors Signal / Universal • Edition 02/08
5ConinversCircular Connectors Signal / Universal • Edition 02/08
AntriebstechnikRundsteckverbinder ProduktÜbersicht
Rundsteckverbinder
KompetenzzentrumIndustrieverkabelung
VorzugstypenSignal und Universal
Rundsteckverbinder
C-HCCrimpkontakte
Anschlusstechnik
Stamped-RolledC-HC Crimp Contacts
Available in:GermanEnglishFrench
Coninvers – The Complete Range at a Glance
Circular ConnectorsDrive Applications
Available in:GermanEnglish
ProductOverviewCircular Connectors
Available in:GermanEnglishFrenchItalianSpanish
Competence CenterIndustrial Cabling
Available in:German
Circular ConnectorsSignal andUniversal
Available in:GermanEnglishFrenchItalian
6 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 signal connector,extended cable entryup to Ø 14.5 mm,universal shielding
M23 signal connectors
Signal connectorwith bayonet locking
Customer-specificdistributor
Angled extension
Receptacles in manyhousing and fixing variants
ConinversCircular Connectors
The Coninvers connectors in the M23series are modular in design. This,
combined with a wide range of pinassignments and the alternative use offemale and male contacts in crimp,solder and sometimes screw versions,explains the enormousproduct spectrum. Whenyou put this in the contextof the wide range ofavailable device flangesand wall bushings, theConinvers signal connectorfamily can be seen as thelargest of its kind in theindustry.
The cross sections of the litz wiresin connecting cables are in the range0.08 to 2.5 mm2. This also applies toplastic-molded connectors in straightand angled versions.
7ConinversCircular Connectors Signal / Universal • Edition 02/08
New power connectorsConPower P30 / P70
The ConPower power connector familycomprises two performance classes:P30 up to 30 A with M23 screw locking andP70 up to 70 A with M40 screw locking.The clamping range for shielded cablesincludes diameters from 7.5 mm to 25 mm.
Male and female contacts cover crimpranges from 0.08 mm2 to 16 mm2.
Extremely simple and time-saving handlingduring assembly makes the angled panelmounting connectors (equipment flanges)particularly attractive. The male contactscan be clipped into theinsulating body fromthe side, forexample, thehousing is madeup of two parts,and the cable exitdirection can beadjusted infinitelyin a range of 310degrees.A robust, metalrotatingmechanismensures a highdegree of operationalsafety and reliable EMC protectionover a wide temperature range,even in the case of frequentadjustments.
M23 power connectors Connection cross section up to 4 mm2
M40 power connectors Connection cross section up to 16 mm2
M16 plastic-molded receptacles with solder connection
M16 circular connectors permit a highdensity of positions in a small amount ofspace. The preassembled and moldedconnecting cables are available with 8, 10,12 and 14 to 19 positions, e.g. as a centralconnector connection for distributorsystems.
M16 connectors are molded with proven,rugged PUR housing material and fulfill therequirements of IP67 protection.
Coninvers offers suitable receptacles inmale versions for front or rear screwmounting with a solder connection.
Plastic-molded signal connectors
M16 receptacles with up to 19 positions
Plastic-molded M16 connectors with up to 19 positions
8 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Coninvers – Circular ConnectorsSignal and Universal
The Coninvers circular connector range has an M23 locking thread which has beendeveloped for industrial applications.Coninvers also offers a variant with abayonet quick locking system.The M23/bayonet signal circular connectorsin the RC/UC/TU series are available withcrimp, screw and solder connectionsystems, as well as for PCB mounting.Signal connectors in the UC series, alsowith M23 locking, feature an extendedcable entry range and universal EMCshielding.Signal connectors in the TU series arebased on UC connectors but feature abayonet quick locking system.The individual connector is put togetherfrom a defined number of articles for thethree components:– Housing, consisting of an M23 knurled
cap or bayonet, an inside sleeve, ahinged insulation sleeve and an adaptercap.
– Cable gland, including the seal, the strainrelief and the optional shielded connection.
– Contact insert, comprising the contactcarrier and the contacts.
Circular connectors are supplied asindividual components.
Signalcircular connectors
Signal circular connectorswith universal shielding
The signal circular connectors in the RCseries are available as 6 to 19-positionversions in crimp, screw and solderconnection types, as well as for PCBconnection (dip solder).Unshielded connectors fulfill therequirements of IP65/ IP68 protection,depending on the cable gland used. Thecomponents for the connection of shieldedconductors offer IP67 protection as a resultof the special cable gland.The product chart on page 10 shows howthe required connector is put together andhow the individual components arecombined.Circular connectors are supplied asindividual components.
Like the RC series, the signal circularconnectors in the UC series are completelymodular in design. This means that a widevariety of connectors can be created from asmall number of different components.Both series contain M23 connectors withsimilar technical specifications. The UCseries uses the same insulating bodies inall pin assignment variants. The differenceis that the UC series is larger than the RCseries, i.e. it offers more cabling space andcan accommodate larger cable diameters.Unlike the RC series, the shielding functionand the cable clamping are universal. It isnot necessary to adapt the shieldingelements to the cables used. This facilitateshandling in the field.
9ConinversCircular Connectors Signal / Universal • Edition 02/08
Signal circular connectorswith bayonet quick locking
Accessories,tools
Typical applications, such as handheldoperator panels, require that connectionscan be released and locked quickly. Theconnectors in the TU series feature bayonetlocking and offer the user this option.The tactile “click” indicates to the user thatthe bayonet connector is locked and theconnection is safely established.TU signal connectors also guarantee IP67protection in the locked state.
The necessary tools (crimping andassembly tools) are available for processingcircular connectors, and accessories, suchas cover caps, are available for specialapplications.
10 Coninvers Circular Connectors Signal / Universal • Edition 02/08
The modular system allows the individualconnector to be selected from a definednumber of articles. To specify a connectorfor the device and mounting side, the
Selection of connectors housing is supplemented by thecorresponding cable gland and contactinsert, including the contacts.
RC-0000000AD00
RC-00000002200
Rear mounting, page 20Front mounting, page 18
Panel mounting connectors
RC-0000000WQ00
Shielded front mounting, page 18-19
RC-00000006100 RC-00000005200
Shielded rear mounting, page 20
RC-00000004200
RC-0000000H000 RC-0000000E000
Unshielded front mounting, page 18
Cable connector housings with universal shielding, page 16
UC-00000008.DUUC-0000000R.DU
UC-0000000T.DUUC-0000000N.DU
Cable connect. receptacle housingswith universal shielding, page 17
UC-00000009.DU, UC-0000000F.DU UC-0000000Q.DU
Rear mounting
Cable connect. receptacle housings for wallmounting with universal shielding, page 17
Unshielded cable connector housings, page 15
RC-00000001.00
RC-0000000Z.00
Unshielded cable connect.receptacles housings, page 15
RC-00000007.00
Shielded cable connector housings, page 14
Shielded cable connecting receptacle housings, page 14
Shielded cable connecting receptacle housings for wall mounting
RC-000000080FZ RC-0000000K0FZ NC-0000000KSFZ
RC-0000000T0FZ
RC-000000090FZ RC-0000000M0FZ
RC-0000000B2FZ RC-0000000C0FZ RC-0000000Q0FZ
Housing
Shielded
Unshielded
Unshielded
Shielded
Shielded
Shielded
With universal shielding
With universal shielding
M23 • RC Series / UC SeriesSignal Circular Connectors
Product selectionThe product chart show the possiblecombinations of cable connector housingand connecting receptacle housing or panelmounting connector.
The chart differentiates between shieldedand unshielded connectors.
11ConinversCircular Connectors Signal / Universal • Edition 02/08
The product chart provides an overview ofthe available components.
Contact inserts
Contact inserts
Contact inserts
Contact inserts
Contact inserts
With 6 to 17-pos. dip solder contacts
Male Female
Direct PCB connection, pages 40-41
6 to 19-pos.
6, 7 and 9-pos.
Contact inserts including contactsSolder contact inserts, page 366 to 19-pos.
Crimp contact inserts, pages 37-39
Screw contact inserts, page 37
Male Female
Male Female
Male Female
For reasons of safety, only female contacts may beused in the live part of the connector.
With Pg and metric connecting threads
Cable glands are not required forpanel mounting connectors.
The connectors are fitted with auniversal shield connection for cablediameters up to 14.5 mm. Shielded cableglands with a cable clamp type cage andshielded sleeve are not required.
Unshielded cable glands, page 23
Shielded cableglands, pages 22-23
Cable glands
All
ho
usi
ng
s av
aila
ble
wit
h e
ith
er
mal
e o
r fe
mal
e co
nta
cts
All
ho
usi
ng
s av
aila
ble
wit
h e
ith
er
mal
e o
r fe
mal
e co
nta
cts
Housing type Free solder pin length
M23 A[mm]
B[mm]
C[mm]
D[mm]
RC-.......2200 3.5 4.5 10.0 17.5
RC-.......WQ00 3.5 4.5 10.0 17.5
RC-.......4200 3.5 4.5 10.0 17.5
RC-.......5200 3.5 4.5 10.0 17.5
RC-.......H000 – – 3.5 11.0
RC-.......E000 – – 3.5 11.0
12 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Mechanical data:Housing material: • Metal parts are either CuZn (copper-zinc alloy) or GD-Zn (die cast), nickel plated or yellow passivated
• Receptacles allowing overpainting carry a thick film passivation
• Plastic caps or plastic coatings of metal parts are made of either PET or PC
Insulating body: Thermoplastic polyester (PBT), polyamide (PA 66), polycarbonate (PC); storage at 15-35 °C, 40-70 % rel. humidity
Contact material: Copper-zinc alloy (CuZn)
Contact surface: Nickel-plated (Ni) with gold layer (Au)
Contact connection type: Solder cup, crimp and screw versions, dip solder pin
Gasket and O-ring: Fluorine rubber (FPM); types with plastic cap: perbunane (NBR) gasket
Ambient temperature: -20°C up to +125°C
Conductor entry: EMC design for external cable diameters 2 - 10.5 mm, without EMC protection for cable diameters 4 - 14 mm,EMC design with extended cable entry range (UC series) for external cable diameters 2 - 14.5 mm
Locking method: M23 screw locking
Mechanical insertion/with drawal cycles: Standard: 50, more upon request
Degree of protection: EMC version: IP67; without EMC protection: IP65 - IP68 (depending on the cable gland); in the locked state
Approvals: UL-recognized File No. E153698 Underwriters Laboratories Inc.® (not for types with plastic cap and the UC series)Other technical data apply for UL.The UL data may differ from the standard nominal data.
M23 • RC Series / UC SeriesTechnical Data
Electrical data:
Derating curve based on DIN EN 60512-5-2 (12-position cable connector mounted)
Ambient temperature [°C]
Cur
rent
[A
]
Shield attenuation curve for RC seriesbased on DIN EN 50289-1-6
Frequency [MHz]
Atte
nuat
ion
[dB
]
Shield attenuation curve for UC series (universal shielding)based on DIN EN 50289-1-6
Frequency [MHz]
Atte
nuat
ion
[dB
]Number of positions 6, 7 9 (8+1) 9 (6+3) 12 16 17 19 (6+3)
Contacts 6, 7 8 + 1 6 + 3 12 16 17 16 + 3Contact Ø [mm] 2 1 2 1 2 1 1 1 1 1.5Conductor cross sections
Solder connection: contacts x [mm2] max. 6 (7) x 2.5 8 x 1.0 + 1 x 2.5 6 x 1.0 + 3 x 2.5 12 x 2.5 16 x 1.0 17 x 1.0 16 x1.0 + 3 x1.0Crimp connection: contacts x [mm2] max. 6 (7) x 2.5 8 x 0.56 + 1 x 2.5 12 x 0.56 16 x 0.56 17 x 0.56 16 x1.0 + 3 x1.5Screw connection: contacts x [mm2] max. 6 (7) x 1.0 8 x 0.75 + 1 x 1.0
Nominal current per contact at 25 °C 1) [A] 20 8 20 8 20 8 8 8 8 10
Data according to DIN EN 61984:2001Nominal/rated voltage [V] 250 150 150 150 150 150 150Test/surge voltage [kV AC] 2.5 1.5 1.5 1.5 1.5 1.5 1.5Surge voltage category II II II II II II IIContamination class 3 3 3 3 3 3 3Installation altitude [m] up to 2000 up to 2000 up to 2000 up to 2000 up to 2000 up to 2000 up to 2000
1) The effective current carrying capacity is to be determined via a derating curve depending on the application, if necessary.
Unlike plugs, connectors must not beplugged in or unplugged under load.
13ConinversCircular Connectors Signal / Universal • Edition 02/08
Direction of contact chamber numbering(view of plug-in side)
M23 • RC Series / UC SeriesPin Assignments and Coding
The RC/UC connectors have a modular design and can be provided for assembly with male or female contacts depending on theapplication. For safety reasons, only female contacts may be used in the live part of the connector.
Contact chamber numbering(view of plug-in side)
Clockwise(standard)
Counter-clockwise(standard)
Counter-clockwise(opposite direction)
Clockwise (opposite direction)
Number of positions Male Female Male Female
6-pos.
Solder/Crimp/Screw
7-pos.
Solder/Crimp/Screw
9-pos. (6+3)
Solder
9-pos. (8+1)
Solder/Crimp/Screw
12-pos.
Solder/Crimp
16-pos.
Solder
16-pos.
Crimp
17-pos.
Solder
17-pos.
Crimp
19-pos. (16+3)
Solder/Crimp
Other coding versions can be configured manually or mechanically on request.
Male, clockwise(standard)
Male, counter-clockwise(opposite direction)
Female, counter-clockwise(standard)
Female, clockwise(opposite direction)
14 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • RC Series ShieldedCable Connectors / CableConnecting Receptacles
Type descriptionRC- 00 00 0 00 80 FZ
Series RC, NCM23 Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing designK0 Cable connector, plastic cap/plastic coated
coupling nutKS Cable connector, plastic cap/metal coupling nutM0 Cable connecting receptacle, plastic capT0 Cable connector angled, metal80 Cable connector straight, metal90 Cable connecting receptacle straight, metal
Cable gland/shield adapterFZ depends on cable used, please order separately
Description
Cable connector housing,straight, shielded, with plastic cap and plastic coated coupling nut
Cable connector housing,straight, shielded, metal
Cable connector housing,straight, shielded, plastic cap and metal coupling nut
Cable connector housing,angled, shielded, metal
Cable connecting receptacle housing,straight, shielded, with plastic cap
Cable connecting receptacle housing,straight, shielded, metal
Contact insertCable gland/shield adapter
Cable connector housings shielded
RC-0000000.0FZ, NC-0000000KSFZ
Type Order No. Pcs.Pkt.
RC-0000000K0FZ 15 92 86 510
RC-000000080FZ 15 92 68 010
NC-0000000KSFZ 15 92 03 010
RC-0000000T0FZ 15 92 99 210
Please order separately, see pages 36-41Please order separately, see pages 22-23
Cable connecting receptacle housings shielded
RC-000000090FZ, RC-0000000M0FZ
Type Order No. Pcs.Pkt.
RC-0000000M0FZ 15 92 89 910
RC-000000090FZ 15 92 75 010
Please order separately, see pages 36-41Please order separately, see pages 22-23
RC-0000000M0FZ
RC-000000090FZRC-0000000K0FZ
NC-0000000KSFZ
RC-000000080FZ
RC-0000000T0FZ
15ConinversCircular Connectors Signal / Universal • Edition 02/08
M23 • RC Series UnshieldedCable Connectors / CableConnecting Receptacles
For Pg and metric cable glands
Type descriptionRC- 00 00 0 00 1 1 00
Series RC, RMM23 Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design1 Cable connector straight, unshielded Z Cable connector angled, unshielded 7 Cable connecting receptacle straight, unshielded
Thread for cable gland1 Pg 9 / M16x1.52 Pg 113 Pg 13.5 / M20x1.5
Cable gland00 no cable gland, order separately
Description Cable entry
Cable connector housing straight, unshielded, metal Pg 9for Pg/metric cable glands Pg 11
Pg 13.5M16x1.5M20x1.5
Cable connector housing angled, can be coded 4 x 90° Pg 9unshielded, metal Pg 11for Pg/metric cable glands Pg 13.5
M16x1.5M20x1.5
Cable connecting receptacle housing straight, unshielded, metal Pg 9for Pg/metric cable glands Pg 11
Pg 13.5M16x1.5M20x1.5
Contact insertCable gland
Cable connector housings unshielded
RC-(RM-)00000001(Z).00
Type Order No. Pcs.Pkt.
RC-00000001100RC-00000001200RC-00000001300RM-00000001100RM-00000001300
15 92 53 515 92 53 915 92 54 616 07 02 616 05 02 9
10
RC-0000000Z100RC-0000000Z200RC-0000000Z300RM-0000000Z100RM-0000000Z300
15 93 03 715 93 04 015 93 04 416 07 02 916 07 03 0
10
Please order separately, see pages 36-41Please order separately, see pages 22-23
Cable connecting receptacle housings unshielded
RC-(RM-)00000007.00
Type Order No. Pcs.Pkt.
RC-00000007100RC-00000007200RC-00000007300RM-00000007100RM-00000007300
15 92 61 815 92 62 115 92 62 616 07 02 716 07 02 8
10
Please order separately, see pages 36-41Please order separately, see pages 22-23
RC-00000001.00RM-00000001.00
RC-0000000Z.00RM-0000000Z.00
RC-00000007.00RM-00000007.00
16 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • UC Series HousingsCable Connectors withUniversal Shielding
Cable entry up to Ø 14.5 mmLike the RC series, the RC series iscompletely modular in design. This meansthat a wide variety of connectors can becreated from a small number of differentcomponents. Both series contain M23connectors with similar technicalspecifications.The UC series uses the same insulatingbodies in all pin assignment variants. TheUC series, however, is larger than the RCseries, i.e. it offers more cabling space andcan accommodate larger cable diameters.Unlike the RC series, the shielding functionand cable clamping are universal. It is notnecessary to adapt the shielding elementsto the cables used. This facilitates handlingin the field.Cable connector and connecting receptaclehousings with an additional thread can beequipped with a second cable strain relief(double bracket) for exceptional loads.
Description Cable entry
Cable connector housing straight,universal cable seal Ø 2-14.5 mm with thread for additional strain relief Pg 13.5with thread for additional strain relief Pg 16
Cable connector housing angled,universal cable seal Ø 2-14.5 mm with thread for additional strain relief Pg 13.5with thread for additional strain relief Pg 16
Contact insertAdditional strain relief
Cable connector housings universal shielding
UC-00000008(R)(T)(N).DU
Type Order No. Pcs.Pkt.
UC-000000080DUUC-0000000R3DUUC-0000000RNDU
16 06 03 016 06 05 816 06 06 1
10
UC-0000000T0DUUC-0000000N3DUUC-0000000NNDU
16 06 06 516 06 04 716 06 05 0
10
Please order separately, see pages 36-41Please order separately, see page 45
For contact inserts and pin assignments,see M23 • RC series.Connectors in the UC series are fitted with auniversal shield connection. Shielded cable glandswith a cable clamp type cage and shielded sleeveare not required.
Please order additional strain relief (doublebracket) and permanent sealing ringsseparately, see page 45.
Type descriptionUC- 00 00 0 00 8 0 DU
Series UCM23 Signal, universal shielding
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design8 Cable connector straight R Cable connector straight with thread
for additional strain reliefT Cable connector angled N Cable connector angled with thread
for additional strain relief
Connecting thread0 no thread3 Pg 13.5N Pg 16
Cable gasketDU notched sealing ring
UC-000000080DU UC-0000000T0DU
UC-0000000R3DUUC-0000000RNDU
UC-0000000N3DUUC-0000000NNDU
17ConinversCircular Connectors Signal / Universal • Edition 02/08
M23 • UC Series HousingsCable Connecting Receptacleswith Universal Shielding
Description Cable entry
Cable connecting receptacle housing straight,universal cable seal Ø 2-14.5 mm with thread for additional strain relief Pg 13.5with thread for additional strain relief Pg 16
Cable connecting receptacle housing straightrear mounting with central fixing nut
universal cable seal Ø 2-14.5 mm with thread for additional strain relief Pg 13.5with thread for additional strain relief Pg 16
Contact insertAdditional strain relief
Cable connecting receptacle housings for rear mounting, universal shielding
UC-0000000Q.DU
Type Order No. Pcs.Pkt.
UC-0000000Q0DUUC-0000000Q3DUUC-0000000QNDU
16 06 05 316 07 07 016 07 08 3
10
Please order separately, see pages 36-41Please order separately, see page 45
Cable connecting receptacle housings universal shielding
UC-00000009(F).DU
Type Order No. Pcs.Pkt.
UC-000000090DUUC-0000000F3DUUC-0000000FNDU
16 06 04 016 07 06 916 06 04 6
10
Please order separately, see pages 36-41Please order separately, see page 45
Please order additional strain relief (doublebracket) and permanent sealing ringsseparately, see page 45.
Type descriptionUC- 00 00 0 00 9 0 DU
Series UCM23 Signal, universal shielding
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design9 Cable connecting receptacle F Cable connecting receptacle with thread
for additional strain reliefQ Cable connecting receptacle, rear mounting
with central fixing nut
Connecting thread0 no thread3 Pg 13.5N Pg 16
Cable gasketDU notched sealing ring
UC-000000090DU
UC-0000000Q0DU
UC-0000000Q3DUUC-0000000QNDU
Installation dimensionsUC-0000000Q0DUUC-0000000Q3DUUC-0000000QNDU
UC-0000000F3DUUC-0000000FNDU
Axial O-ring
Axial O-ring
Axial O-ring
Cable entry up to Ø 14.5 mmConnectors in the UC series are fitted witha universal shield connection. Shieldedcable glands with a cable clamp type cageand shielded sleeve are not required.For contact inserts and pin assignments, see M23 • RC series.
18 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • RC Series Panel Mounting Connectors Front Mounting
In the case of frontmounting, the panelmounting connector isfitted to the device fromoutside using screws,nuts or threads.The contact insert thenestablishes theconnection to the deviceby either solder or crimpconnections at the deviceend.
Description Wall thickness[mm]
Panel mounting connector, front mounting, straight,flat gasket (self-adhesive), 4-hole mounting, for unshielded applications from 1
Panel mounting connector, front mounting, straight, radial O-ring, 4-hole mounting, with reinforced mounting flange, for shielded applications from 3
Cable connecting receptacle, front mounting, straight, shielded, 4-hole mounting and O-ring, for wall bushing for a shielded cable 3-7
Contact insertCable gland/shield adapter
Panel mounting connector housings front mounting
RC-00000002200, RC-0000000WQ00
Type Order No. Pcs.Pkt.
RC-00000002200 15 92 57 4
10
RC-0000000WQ00 15 93 02 1
10
Please order separately, see pages 36-41
Cable connect. receptacle housing front mounting
RC-0000000B2FZ
Type Order No. Pcs.Pkt.
RC-0000000B2FZ 15 92 78 1
10
Please order separately, see pages 36-41Please order separately, see pages 22-23
RC-0000000B2FZ
RC-0000000WQ00
RC-00000002200
Flat gasket
Radial O-ring
Radial O-ring
Installationdimensions
Flat gasket
Radial O-ring
Type descriptionRC- 00 00 0 00 22 00
Series RC M23 Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design front mounting22 Panel mounting connector with flat gasketWQ Panel mounting connector with O-ring radialB2 Cable connect. receptacle (wall bushing)
Cable gland/shield adapter00 no cable sealFZ depends on cable used, please order separately
19ConinversCircular Connectors Signal / Universal • Edition 02/08
Mounting hole with anti-rotationprotection and counter nut
Mounting bushing with thread
(Recommendation for fitting in steel plate)
(Recommendation for fitting in steel plate)
RC-00000006100
Axial O-ring
M23 • RC Series Panel Mounting Connectors Front Mounting
Description
Panel mounting connector,front mounting, straight, central fixing nut, for shielded applications
Panel mounting connector,front mounting, angled rotary,4-hole mounting for shielded applications
Contact insert
Panel mounting connector housing front mounting
RC-00000006100
Type Order No. Pcs.Pkt.
RC-00000006100 15 92 60 4
10
Please order separately, see pages 36-41
Panel mounting connector housing angled rotary, front mounting
RC-0000000AD00
Type Order No. Pcs.Pkt.
RC-0000000AD00 15 92 77 7
16
Please order separately, see pages 36-41
Type descriptionRC- 00 00 0 00 61 00
Series RC M23 Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design front mounting61 Panel mounting connector with central fixing nutAD Panel mounting connector angled rotary
Cable gland/shield adapter00 no cable seal
Housings cannot be combined with dipsolder contacts
RC-0000000AD00
Installationdimensions
Axial O-ring
Edge stripping max. 0.2
Other ranges of rotation on request
20 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • RC Series Panel Mounting Connectors Rear Mounting
Panel mountingconnectors for rearmounting are designedfor the efficient installationof preassembled printedcircuit boards, forexample. These housingsare fed through themounting panel from theinside and screwed tightfrom the outside.
Description Wall thickness[mm]
Panel mounting connector,rear mounting, low design, radial O-ring, 4-hole thread mounting (M2.5) 2.7-3.5
Panel mounting connector,rear mounting, low design,radial O-ring, 4-hole mounting (Ø 2.7) 2.7-3.5
Panel mounting connector,rear mounting, high design,with 3 mm flange, radial O-ring, 4-hole thread mounting (M3) 3-10.5
Panel mounting connector,rear mounting, high design, central fixing nut, axial O-ring
up to 6.5
Cable connecting receptacle,rear mounting, shielded, 4-hole thread mounting (M2.5), flat gasket, for wall bushing for a shielded cable up to 2.5
Cable connecting receptacle,rear mounting, shielded, central fixing nut, axial O-ring, for wall bushing for a shielded cable up to 6.5
Contact insertCable gland/shield adapter
Panel mounting connector housings rear mounting
RC-000000042(52)(E0)(H0)00
Type Order No. Pcs.Pkt.
RC-00000004200 15 92 58 9
10
RC-00000005200 15 92 59 9
10
RC-0000000E000 15 92 81 3
10
RC-0000000H000 15 92 83 3
10
Please order separately, see pages 36-41
Cable connect. receptacle housings rear mounting
RC-0000000C(Q)0FZ
Type Order No. Pcs.Pkt.
RC-0000000C0FZ 15 92 79 0
10
RC-0000000Q0FZ 15 92 92 4
10
Please order separately, see pages 36-41Please order separately, see pages 22-23
RC-0000000H000
RC-0000000E000
RC-00000004200, RC-00000005200
RC-0000000C0FZ
RC-0000000Q0FZ
Flat gasket
AxialO-ring
Radial O-ring
Radial O-ring
Axial O-ring
Installationdimensions
Axial O-ring
Radial O-ring
Flat gasket
21ConinversCircular Connectors Signal / Universal • Edition 02/08
22 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • RC SeriesCable Glands /Shield Adapers IP67
Cable clamp type cagewith shield adapter
RC-Z....
Type Order No. Pcs.Pkt.
RC-Z2425RC-Z2426
16 04 49 116 04 49 5
10
RC-Z2225RC-Z2427RC-Z2428RC-Z2429RC-Z2430RC-Z2431RC-Z2432
16 04 36 816 04 49 716 07 02 116 04 50 016 04 50 316 04 50 516 04 50 6
10
RC-Z2433RC-Z2434RC-Z2435RC-Z2222RC-Z2436RC-Z2437RC-Z2438RC-Z2439RC-Z2440RC-Z2441
16 07 02 216 04 50 916 04 51 116 04 36 416 04 51 316 04 51 616 04 51 716 04 51 916 04 52 016 04 52 2
10
RC-Z2442RC-Z2443RC-Z2227RC-Z2403RC-Z2228RC-Z2395RC-Z2392RC-Z2444RC-Z2445RC-Z2396RC-Z2446
16 04 52 416 04 52 616 04 37 016 04 47 216 04 37 316 04 45 816 04 45 216 04 52 916 04 53 216 04 46 016 04 53 4
10
RC-Z2447RC-Z2448RC-Z2449RC-Z2229RC-Z2391RC-Z2398RC-Z2450RC-Z2451RC-Z2221RC-Z2393RC-Z2394RC-Z2401RC-Z2402
16 07 02 316 04 53 616 07 02 416 04 37 516 04 44 916 04 46 216 04 53 916 04 54 116 04 36 216 04 45 416 04 45 616 04 46 816 04 47 0
10
RC-Z2404RC-Z2452RC-Z2453RC-Z2454RC-Z2455RC-Z2399
16 04 47 416 07 02 516 04 54 516 04 54 716 04 54 916 04 46 5
10
The cables are fed through the cable andcable connecting housings to some extentusing cable glands. These differ accordingto the application (shielded or unshielded).In the case of shielded connectors, cableclamp type cages and shielded adaptersare required. They can be used to configurea multitude of plug connectioncombinations for different cable types withcable diameters from 3.5 mm to 10.5 mm.The shield adapter used depends on thediameter of the core bundle under braidedscreen d and is pushed immediately underthe braided screen when the connector isassembled. The shield adapter serves as aconnection element between the cableshield and the connector housing (innersleeve and adapter cover).The cable clamp type cage with the gasketguarantees sealing to IP67 protection andassumes the cable strain relief function.The specific type for each cable dependson external cable diameter D.We recommend that you try out borderlinetypes for transition points between twocable gland sizes.
Ordering exampleShielded cable connection:A 6-core, shielded cable is to be adaptedwith cable connector housing RC-000000080FZ.– External cable diameter D = 6.0 mm.– Diameter of core bundle d = 4.7 mm.The appropriate cable gland can be foundin the category D = 5.5 mm to 6.5 mm andin line d ≈ 4.9 mm, i.e. RC-Z2438.
Diagram of conductor bundle diameter d and externalcable diameter D
Description Conductor bundle-Ød [mm]
Cable clamp type cage and shield adapterExternal cable dia. ≈ 2.5D = 3.5 mm – 4.5 mm ≈ 3.2
Cable clamp type cage and shield adapterExternal cable dia. ≈ 2.5D = 4.5 mm – 5.5 mm ≈ 3.2
≈ 3.6≈ 3.8≈ 4.1≈ 4.3≈ 4.6
Cable clamp type cage and shield adapterExternal cable dia. ≈ 3.2D = 5.5 mm – 6.5 mm ≈ 3.6
≈ 3.8≈ 4.1≈ 4.3≈ 4.6≈ 4.9≈ 5.2≈ 5.5≈ 5.8
Cable clamp type cage and shield adapterExternal cable dia. ≈ 3.6D = 6.5 mm – 7.5 mm ≈ 3.8
≈ 4.1≈ 4.3≈ 4.6≈ 4.9≈ 5.2≈ 5.5≈ 5.8≈ 6.2≈ 6.6
Cable clamp type cage and shield adapterExternal cable dia. ≈ 3.8D = 7.5 mm – 9.5 mm ≈ 4.1
≈ 4.3≈ 4.6≈ 4.9≈ 5.2≈ 5.5≈ 5.8≈ 6.2≈ 6.6≈ 7.0≈ 7.4≈ 7.7
Cable clamp type cage and shield adapterExternal cable dia. ≈ 5.8D = 9.5 mm – 10.5 mm ≈ 6.2
≈ 6.6≈ 7.0≈ 7.4≈ 7.7
23ConinversCircular Connectors Signal / Universal • Edition 02/08
M23 • RC SeriesCable Glands Shielded / Unshielded
Description Cable-ØD [mm]
Universal cable clamp type cagewith shielding function Cable clamp type cage, shield disc 2 – 10.5and universal gasket
Universal cable clamp type cage,cable feed-through without shielding function Cable clamp type cage 2 – 10.5and universal gasket
Universal cable clamp type cagewith/without shielding function
RC-Z....
Type Order No. Pcs.Pkt.
RC-Z2462 16 04 55 8
10
RC-Z2463 16 04 56 1
10
Description Cable Cable-Ø entry D [mm]
Cable gland for unshielded applications Pg 9 6 – 10in acc. to DIN 46 320, IP 65 Pg 11 8 – 12
Pg 13.5 10 – 14
M16x1.5 3 – 10M20x1.5 4 – 14
Cable gland with doublebracket cable strain relief, Pg 9 6 – 10for unshielded Pg 11 8 – 12applications, IP 65 Pg 13.5 10 – 14
M16x1.5 3 – 10M20x1.5 4 – 14
IP 68 cable glandfor unshielded Pg 9 6.5 – 9applications Pg 11 7 – 10.5with PVC gasket sleeve Pg 13.5 9 – 13
M16x1.5 6.5 – 9M20x1.5 9 – 13
Cable glands withPg/metric threads
RC-Z....
Type Order No. Pcs.Pkt.
RC-Z2091RC-Z2092RC-Z2093
RC-Z2406RC-Z2409
16 04 24 216 04 24 516 04 24 7
16 07 01 516 04 47 9
10
RC-Z2051RC-Z2052RC-Z2053
RC-Z2407RC-Z2410
16 04 21 316 04 21 616 04 21 8
16 07 01 616 04 48 1
10
RC-Z2191RC-Z2196RC-Z2202
RC-Z2414RC-Z2417
16 04 33 416 04 33 816 04 34 5
16 07 01 816 07 01 9
10
Universal cable glands are available asalternatives to the shielded cable glands toIP67 for applications with less stringentrequirements regarding shield attenuation.Irrespective of the diameter of the cable orbraided core screen, shielded andunshielded cables with an externaldiameter from 2 to 10.5 mm can beassembled for universal use with only onecable gland. This facilitates warehousing.
Universal cable clamp type cage with shieldingfunction, D = external cable diameter
Universal cable clamp type cage, cable feed-through without shielding function,D = external cable diameter
U-disc
U-disc
Various cable glands can be supplied withPg and metric threads for unshieldedconnectors. These are screwed into theadapter cover from the outside. Suitablevariants are available for external cablediameters from 3 mm to 14 mm.
Ordering exampleUnshielded cable gland:A 9-core, unshielded cable is to be adaptedwith cable connector receptacle housingRC-00000007100.– External cable diameter D = 8 mm.If a Pg cable gland in acc. with DIN 46 320is to be selected, type RC-Z2091corresponding to PG 9 for external cablediameters from 6 mm to 10 mm optimallyfulfills the requirements.
The cable entry of the cable connectors andcable connecting receptacles mustcorrespond to the cable glands.
24 Coninvers Circular Connectors Signal / Universal • Edition 02/08
10 Nm - 12 Nm
M23 • RC SeriesAssembly Instructions
Cable Connectors and Cable ConnectingReceptacles, Straight, Shielded
• Push the adapter (1), the union nut (2) and the sealingelement (4) with the gasket (3) onto the cable.
• Strip the external sheath by 23 mm.• Detail A: Push back the braided screen such that it
stands out at 90°. With a rotating motion, push theshielded sleeve (5A) over the foil or cotton braidingand under the braided screen. Cut the braided screenflush with the external diameter of the shielded sleeve(5A).
• Trim the foil, wadding and inner insulation.
Coding groove
• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (6).• Guide the insert (7) and spacer sleeve (6) into the
insert sleeve (8), taking care that the desired codinggroove of the insert (7) is introduced into the codingbar.
• Press in the cable with the shield and sealing unit.• Screw the adapter (1) as tight as possible.
Cable Connectors and Cable Connecting Receptacles,Straight, Shielded, Plastic Cap
Coding groove
• Push the adapter (1), the union nut (2) and the seal-ing element (4) with the gasket (3) onto the cable.
• Strip the external sheath by 23 mm.• Push back the braided screen such that it stands out
at 90° and cut it flush with the outer diameter of theshield disc (5).
• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (6).
• Guide the insert (7) and spacer sleeve (6) into theinsert sleeve (8), taking care that the desired codinggroove of the insert (7) is introduced into the codingbar.
• Press in the cable with the shield and sealing unit.• Screw the adapter (1) as tight as possible.
Attention: The required torque must not increase bymore than 10 Nm during this process, as this caneffect the free movement of the union nut.
Cable Connectors,Angled, Shielded
Coding groove
Wrench RC-Z 2099
• Push the adapter (1) and the sealing element (3) withthe gasket (2) onto the cable.
• Strip the external sheath by 70 mm.• Detail A: Push back the braided screen such that it
stands out at 90°. With a rotating motion, push theshielded sleeve (4A) over the foil or cotton braiding butunder the braided screen. Cut the braided screen flushwith the external diameter of the shielded sleeve (4A).
• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Pull the cable unit as far as possible through the
angle housing (5).
• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (6).• Guide the insert (7) and spacer sleeve (6) into the
unit (8), taking care that the desired coding grooveof the insert (7) is introduced into the coding bar.
• Insert the entire unit into the angle housing (Attention:eight coding options) and secure with nut (8A)(torque: 10 Nm up to 12 Nm).
• Press in the cable with the shield and sealing unit.• Screw the adapter (1) as tight as possible.
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
25ConinversCircular Connectors Signal / Universal • Edition 02/08
10 Nm - 12 Nm
Torx T10 • 1.7 Nm
• Solder, crimp or screw the litz wires to the contactsand guide them into the insert (3).
• Push the insert (3) through the housing (1).• Push the spacer sleeve (2) onto the insert (3) and
position it in the housing (1).• Push the cover (4) onto the housing (1) and hook it in.• Attach the cover (4) with the screws (5) (Torx T10),
torque: 1.7 Nm
Alternatively:• Solder, crimp or screw the litz wires to the contacts
and push them through the housing (1)• Push the crimped contacts into the insert (3).• Push the spacer sleeve (2) onto the insert (3) and
position it in the housing (1).• Push the cover (4) onto the housing (1) and hook it in.• Attach the cover (4) with the screws (5) (Torx T10,
torque: 1.7 Nm).
M23 • RC SeriesAssembly Instructions
Panel Mounting Connectors (Receptacles),Angled Rotary
Cable Connectors and Cable Connecting Receptacles,Straight, Unshielded
Coding groove
• Push the cable screw connection (1), adapter (2) andunion nut (3) onto the cable.
• Strip the external sheath by 20 mm.• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (4).
• Guide the insert (5) and spacer sleeve (4) into theinsert ring (6), taking care that the desired codinggroove of the insert (7) is introduced into the codingbar.
• Screw the adapter (2) as tight as possible.• Screw the cable gland (1) as tight as possible.
Cable Connectors,Angled, Unshielded
Coding groove
Wrench RC-Z 2099
• Push the cable screw connection (1), adapter (2) andangle housing (3) onto the cable.
• Strip the external sheath by 30 mm.• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (4).• Guide the insert (5) and spacer sleeve (4) into the unit
(6), taking care that the desired coding groove of theinsert (5) is introduced into the coding bar.
• Insert the entire unit into the angle housing (Attention:eight coding options) and secure with nut (6A)(torque: 10 Nm up to 12 Nm).
• Screw the adapter (2) as tight as possible.• Screw the cable gland (1) as tight as possible.
Panel Mounting Connectors(Receptacles),Removing the PlasticLatching Ring
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
26 Coninvers Circular Connectors Signal / Universal • Edition 02/08
M23 • UC SeriesWith Universal ShieldingAssembly Instructions
Cable Connectors and Cable Connecting Receptacles, Straight
• Push the adapter (1) and the sealing element (3) withthe gasket (2) onto the cable.
• Strip the external sheath by 30 mm.• Push back the braided screen so it stands out at 90°
and cut to length.• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.
• Insert the spacer sleeve (4).• Guide the insert (5), the spacer sleeve (4) and the
sealing element (3) with the gasket (2) into the insertring (6), taking care that the desired coding groove ofthe insert (5) is introduced into the coding bar of thespacer sleeve (6).
• Screw the adapter (1) as tight as possible.
Coding groove
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
27ConinversCircular Connectors Signal / Universal • Edition 02/08
10 Nm - 12 Nm
M23 • UC SeriesWith Universal ShieldingAssembly Instructions
Cable Connectors,Angled
• Push the adapter (1) and sealing element (2) onto thecable.
• Strip the external sheath by 80 mm.• Trim the foil, wadding and inner insulation.• Push back the braided screen so it stands out at 90°
and cut to length.• Strip the litz wires by 6 mm.• Crimp the litz wires to the contacts.• Push the cable unit through
the angle housing (4).• Insert the spacer sleeve (3) into the angle housing (4).• Push the sealing element (2) over the spacer sleeve
(3) thus clamping the braided screen between sealingelement and spacer sleeve.
• Push crimped contacts into the insert (6).• Insert the spacer sleeve (5).• Guide the insert (6) and spacer sleeve (5) into the unit
(7), taking care that the desired coding groove of theinsert (6) is introduced into the coding bar.
• Insert the entire unit into the angle housing. (Attention:eight coding options) and secure with nut (7A) (torque:10 Nm up to 12 Nm).
• Screw the adapter (1) as tight as possible.
Coding groove
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
28 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Bayonet • TU Series Signal Circular Connectors
TU-00000005300TU-00000004100
Rear mounting, page 33
TU-0000000WB00
Front mounting, page 33
Panel mounting connectors
TU-00000009UDU
Cable connecting receptacle housings with universal shielding, page 32
With universal shielding
With universal shielding
Shielded
TU-0000000TUDUTU-00000008UDU
Cable connector housings with universal shielding, page 32Housing
Product selectionThe product chart show the possiblecombinations of cable connector housingand cable connector receptacle housing orpanel mounting connectors.The cable connectors and cable connectingreceptacles are fitted with a universal shieldconnection for cable diameters up to 14.5mm.
The modular system allows the individualconnector to be selected from a definednumber of articles. To specify a connectorfor the device and mounting side, the
Selection of connectorshousing is supplemented by thecorresponding contact insert, includingcontacts.
29ConinversCircular Connectors Signal / Universal • Edition 02/08
Contact inserts including contacts
Contact inserts
Contact inserts
Contact inserts
Contact inserts
The connectors are fitted with a universalshield connection for cable diameters upto 14.5 mm. Shielded cable glands with acable clamp type cage and shieldedsleeve are not required.
The connectors are fitted with a universalshield connection for cable diameters upto 14.5 mm. Shielded cable glands with acable clamp type cage and shieldedsleeve are not required.
With 6 to 17-pos. dip solder contacts
Male Female
Direct PCB connection, pages 40-41
6 to 19-pos.
6, 7 and 9-pos.
Solder contact inserts, page 366 to 19-pos.
Crimp contact inserts, pages 37-39
Screw contact inserts, page 37
Male Female
Male Female
Male Female
For reasons of safety, only female contacts may beused in the live part of the connector.
All
ho
usi
ng
s av
aila
ble
wit
h e
ith
er
mal
e o
r fe
mal
e co
nta
cts
All
ho
usi
ng
s av
aila
ble
wit
h e
ith
er
mal
e o
r fe
mal
e co
nta
cts
The product chart provides an overviewof the available components.
Housing type Free solder pin length
Bayonet A[mm]
B[mm]
C[mm]
D[mm]
TU-.......WB00 – – 9.0 16.5
TU-.......4100 2.5 3.5 9.0 16.5
TU-.......5300 2.5 3.5 9.0 16.5
30 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Unlike plugs, connectors must not beplugged in or unplugged under load.
Mechanical data:Housing material: Machined component: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn),
housing surface nickel-plated
Insulating body: Thermoplastic polyester (PBT), polyamide (PA 66), polycarbonate (PC); storage at 15-35 °C, 40-70 % rel. humidity
Contact material: Copper-zinc alloy (CuZn)
Contact surface: Nickel-plated (Ni) with gold layer (Au)
Contact connection type: Solder cup, crimp and screw versions, dip solder pin
Gasket and O-ring: Fluorine rubber (FPM); flat gasket: perbunane (NBR), fluorine rubber (FPM)
Ambient temperature: -20°C up to +125°C
Conductor entry: EMC design for external cable diameters 2 - 14.5 mm
Locking method: Bayonet locking, bayonet ring dia. 29.3 mm
Mechanical insertion/with drawal cycles: Standard: 50, more upon request
Degree of protection: EMC version: IP67 in the locked state
Bayonet • TU SeriesTechnical Data
Electrical data:
Derating curve based on DIN EN 60512-5-2 (12-position cable connector mounted)
Ambient temperature [°C]
Cur
rent
[A
]
Shield attenuation curve based on DIN EN 50289-1-6
Frequency [MHz]
Atte
nuat
ion
[dB
]
Number of positions 6, 7 9 (8+1) 9 (6+3) 12 16 17 19 (6+3)
Contacts 6, 7 8 + 1 6 + 3 12 16 17 16 + 3Contact Ø [mm] 2 1 2 1 2 1 1 1 1 1.5Conductor cross sections
Solder connection: contacts x [mm2] max. 6 (7) x 2.5 8 x 1.0 + 1 x 2.5 6 x 1.0 + 3 x 2.5 12 x 2.5 16 x 1.0 17 x 1.0 16 x1.0 + 3 x1.0Crimp connection: contacts x [mm2] max. 6 (7) x 2.5 8 x 0.56 + 1 x 2.5 12 x 0.56 16 x 0.56 17 x 0.56 16 x1.0 + 3 x1.5Screw connection: contacts x [mm2] max. 6 (7) x 1.0 8 x 0.75 + 1 x 1.0
Nominal current per contact at 25 °C 1) [A] 20 8 20 8 20 8 8 8 8 10
Data according to DIN EN 61984:2001Nominal/rated voltage [V] 250 150 150 150 150 150 150Test/surge voltage [kV AC] 2.5 1.5 1.5 1.5 1.5 1.5 1.5Surge voltage category II II II II II II IIContamination class 3 3 3 3 3 3 3Installation altitude [m] up to 2000 up to 2000 up to 2000 up to 2000 up to 2000 up to 2000 up to 2000
1) The effective current carrying capacity is to be determined via a derating curve depending on the application, if necessary.
31ConinversCircular Connectors Signal / Universal • Edition 02/08
Direction of contact chamber numbering(view of plug-in side)
Bayonet • TU SeriesPin Assignments and Coding
The TU connectors have a modular design and can be provided for assembly with male or female contacts depending on theapplication. For safety reasons, only female contacts may be used in the live part of the connector.
Contact chamber numbering(view of plug-in side)
Clockwise(standard)
Counter-clockwise(standard)
Counter-clockwise(opposite direction)
Clockwise (opposite direction)
Number of positions Male Female Male Female
6-pos.
Solder/Crimp/Screw
7-pos.
Solder/Crimp/Screw
9-pos. (6+3)
Solder
9-pos. (8+1)
Solder/Crimp/Screw
12-pos.
Solder/Crimp
16-pos.
Solder
16-pos.
Crimp
17-pos.
Solder
17-pos.
Crimp
19-pos. (16+3)
Solder/Crimp
Other coding versions can be configured manually or mechanically on request.
Male, clockwise(standard)
Male, counter-clockwise(opposite direction)
Female, counter-clockwise(standard)
Female, clockwise(opposite direction)
32 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Bayonet • TU Series Cable Connectors / CableConnecting Receptacles
Description
Bayonet cable connector housing straight, with universal shielding, metal for external cable diameters from 2 mm to 14.5 mm
Bayonet cable connector housing angled, with universal shielding, metal for external cable diameters from 2 mm to 14.5 mm
Bayonet cable connecting receptacle housing straight, with universal shielding, metal for external cable diameters from 2 mm to 14.5 mm
Contact insert
Bayonet cable connector housings shielded
TU-0000000.UDU
Type Order No. Pcs.Pkt.
TU-00000008UDU 16 05 88 610
TU-0000000TUDU 16 05 89 110
Please order separately, see pages 36-41
Bayonet cable connecting receptacle housing shielded
TU-00000009UDU
Type Order No. Pcs.Pkt.
TU-00000009UDU 16 05 88 810
Please order separately, see pages 36-41
TU-00000008UDU
TU-0000000TUDU
TU-00000009UDUType description
TU- 00 00 0 00 8U DU
Series TUBayonet Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing design8U Cable connector straight 9U Cable connecting receptacle straightTU Cable connector angled
Cable gasketDU notched sealing ring
Signal connectors in the TU series featurea bayonet locking system which is easy touse but robust at the same time.Like the signal connectors with M23 screwlocking, the TU series is completelymodular in design and uses the sameinsulating bodies/contacts.The TU series is based on UC connectors,i.e. it also offers more cabling space andcan accommodate larger cable diameters.The shielding function and the cableclamping are universal. It is not necessaryto adapt the shielding elements to thecables used.
33ConinversCircular Connectors Signal / Universal • Edition 02/08
Bayonet • TU SeriesPanel Mounting ConnectorsFront/Rear Mounting
In the case of front mounting, the panelmounting connector is fitted to the devicefrom outside using screws or nuts. Thecontact insert then establishes theconnection to the device by either solder orcrimp connections at the device end.Panel mounting connectors for rearmounting are fed through the mountingpanel from the inside and screwed tightfrom the outside.
Type descriptionTU- 00 00 0 00 41 00
Series TUBayonet Signal
No. of positions00 blank,
see contact insert
Contact type/numbering00 blank,
see contact insert
Coding0 blank,
see contact insert
Contact connection00 blank,
see contact insert
Housing designWB Panel mounting connector, front mounting
axial O-ring41 Panel mounting connector, rear mounting
flat gasket53 Panel mounting connector, rear mounting
radial O-ring
Cable gasket00 no sealing ring
Description Wall thickness[mm]
Bayonet panel mounting connector,front mounting, straight, axial O-ring4-hole mounting (Ø 3.2 mm), for connecting shielded connectors from 1.5
Bayonet panel mounting connector,rear mounting, straight, flat gasket,4-hole thread mounting (M3), for connecting shielded connectors max. 2.5
Bayonet panel mounting connector,rear mounting, straight, radial O-ring,4-hole mounting (Ø 3.2 mm), for connecting shielded connectors 2.7 – 3.5
Contact insert
Bayonet panel mounting connector housingfront mounting
TU-0000000WB00
Type Order No. Pcs.Pkt.
TU-0000000WB00 16 05 89 3
10
Please order separately, see pages 36-41
Bayonet panel mounting connector housingrear mounting
TU-00000004100,TU-00000005300
Type Order No. Pcs.Pkt.
TU-00000004100 16 05 88 1
10
TU-00000005300 16 05 88 5
10
Please order separately, see pages 36-41
Axial O-ring
Flat gasket
Axial O-ring Flat gasket
Radial O-ring
Radial O-ring
Installationdimensions
TU-0000000WB00 TU-00000004100
TU-00000005300
34 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Bayonet • TU SeriesAssembly Instructions
Cable Connectors and Cable Connecting Receptacles, Straight
• Push the adapter (1) and the sealing element (3) withthe gasket (2) onto the cable.
• Strip the external sheath by 30 mm.• Push back the braided screen so it stands out at 90°
and cut to length.• Trim the foil, wadding and inner insulation.• Strip the litz wires by 3.5 mm, twist (and tin plate).• Solder, crimp or screw the litz wires to the contacts.• Insert the spacer sleeve (4).
• Guide the insert (5), the spacer sleeve (4) and thesealing element (3) with the gasket (2) into the insertring (6), taking care that the desired coding groove ofthe insert (5) is introduced into the coding bar of thespacer sleeve (6).
• Screw the adapter (1) as tight as possible.
Coding groove
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
35ConinversCircular Connectors Signal / Universal • Edition 02/08
10 Nm - 12 Nm
Bayonet • TU SeriesAssembly Instructions
Cable Connectors,Angled
• Push the adapter (1) and sealing element (2) onto thecable.
• Strip the external sheath by 80 mm.• Trim the foil, wadding and inner insulation.• Push back the braided screen so it stands out at 90°
and cut to length.• Strip the litz wires by 6 mm.• Solder, crimp or screw the litz wires to the contacts.• Push the cable unit through
the angle housing (4).• Insert the spacer sleeve (3) into the angle housing (4).• Push the sealing element (2) over the spacer sleeve
(3) thus clamping the braided screen between sealingelement and spacer sleeve.
• Push crimped contacts into the insert (6).• Insert the spacer sleeve (5).• Guide the insert (6) and spacer sleeve (5) into the unit
(7), taking care that the desired coding groove of theinsert (6) is introduced into the coding bar.
• Insert the entire unit into the angle housing. (Attention:eight coding options) and secure with nut (7A) (torque: 10 Nm up to 12 Nm).
• Screw the adapter (1) as tight as possible.
Coding groove
For assembly tools, see pages 42-44
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating dia. 1 mm• max. 0.2 Nm for screw contacts with mating dia. 2 mm
36 Coninvers Circular Connectors Signal / Universal • Edition 02/08
RC / UC / TU SeriesContact Inserts6 to 19-Positions
Description Contact type/Numbering
Contact insert 6-pos.Contacts: 6 x Ø2.0 mm Male/Standard
Female/Standard
Contact insert 7-pos.Contacts: 7 x Ø2.0 mm Male/Standard
Female/Standard
Contact insert 9-pos. (6+3)Contacts: Male/Standard6 x Ø1.0 mm, 3 x Ø2.0 mm Female/Standard
Contact insert 9-pos. (8+1)Contacts: Male/Standard8 x Ø 1.0 mm, 1 x Ø2.0 mm
Male/Opposite
Female/Standard
Female/Opposite
Contact insert 12-pos.Contacts: 12 x Ø1.0 mm Male/Standard
Male/OppositeFemale/StandardFemale/Opposite
Contact insert 16-pos.Contacts: 16 x Ø1.0 mm Male/Standard
Female/Standard
Contact insert 17-pos.Contacts: 17 x Ø1.0 mm Male/Standard
Male/OppositeFemale/StandardFemale/Opposite
Contact insert 19-pos.Contacts: Male/Standard16 x Ø1.0 mm, 3 x Ø 1.5 mm Female/Standard
Connection cross section [mm2]for contact Ø 1.0 mm / 1.5 mmfor contact Ø 2.0 mm
Contact insert and solder contactsmale / female
RC-....N120000
Type Order No. Pcs.Pkt.
RC-06P1N120000
RC-06S1N120000
15 93 07 2
15 93 64 5
10
RC-07P1N120000
RC-07S1N120000
15 94 26 3
15 94 55 8
10
RC-63P1N120000RC-63S1N120000
16 03 53 816 03 66 8
10
RC-09P1N120000
RC-09P2N120000
RC-09S1N120000
RC-09S2N120000
15 94 88 7
15 95 60 0
15 95 79 1
15 96 53 5
10
RC-12P1N120000RC-12P2N120000RC-12S1N120000RC-12S2N120000
15 96 85 615 97 86 715 98 46 615 99 61 4
10
RC-16P1N120000RC-16S1N120000
10
RC-17P1N120000RC-17P2N120000RC-17S1N120000RC-17S2N120000
16 01 19 316 01 72 716 01 79 916 02 38 3
10
19-pos. (16+3)RC-19P1N120000RC-19S1N120000
16 02 48 216 02 74 9
10
≤ 1.0≤ 2.5
Type descriptionRC- 06 P1 N 12 00 00
Series RCSignal
No. of positions06 6 16 1607 7 17 1763 9(6+3) 19 19(16+3)09 9(8+1) 1R 19(16+2+PE)12 12
Contact type/numberingP1 Male (Pin)/standardP2 Male (Pin)/opposite direction S1 Female (Socket)/standardS2 Female (Socket)/opposite direction
CodingN N-Coding 0°
Contact connection 12 Solder RM Crimp for 16+2+PE8. Crimp S2 Screw
Housing design00 blank, see housing
Cable gland00 blank, see housing
The contact inserts with the contact carriersand the contacts are available for thefollowing connection types:– Soldering– Crimping– Screwing– Dip soldering for printed circuit boardsIn the case of each connection system,contact inserts are available for different – Pin assignments– Male and female contacts – And for the most part, clockwise or
counter-clockwise numbering of thecontact chamber
Ordering instructions:The first step is to determine theconnection system – soldering, dipsoldering, crimping or screwing. Thenumber of positions corresponds to theapplication and the number of cores. Theselection male or female depends on thecircuitry. The direction of the numberingdepends on individual requirements.The standard numbering direction is (view of plug-in side):– Male contact carrier, clockwise– Female contact carrier, counter-clockwiseThis ensures that the plug connectionsmatch.
Direction of contact chamber numbering(view of plug-in side)
Housingtermination
Male, clockwise(standard)
Male, counter-clockwise(opposite direction)
Female, counter-clockwise(standard)
Female, clockwise(opposite direction)
37ConinversCircular Connectors Signal / Universal • Edition 02/08
Contact insert and crimp contacts machinedmale / female
RC-....N8.0000
Type Crimp range* see below
Order No. Pcs.Pkt.
RC-06P1N8B0000 CRC-06P1N8K0000 DRC-06S1N8B0000 CRC-06S1N8K0000 D
15 93 52 516 06 99 215 94 14 516 06 99 5
10
RC-07P1N8B0000 CRC-07P1N8K0000 DRC-07S1N8B0000 CRC-07S1N8K0000 D
15 94 49 716 06 99 715 94 78 616 06 99 8
10
RC-09P1N8C0000 8xB+1xCRC-09P1N8L0000 8xB+1xDRC-09P2N8C0000 8xB+1xCRC-09P2N8L0000 8xB+1xDRC-09S1N8C0000 8xB+1xCRC-09S1N8L0000 8xB+1xDRC-09S2N8C0000 8xB+1xCRC-09S2N8L0000 8xB+1xD
15 95 50 116 07 00 115 95 75 816 07 00 215 96 41 716 07 00 415 96 72 416 07 00 5
10
RC-12P1N8D0000 BRC-12P2N8D0000 BRC-12S1N8D0000 BRC-12S2N8D0000 B
15 97 63 515 98 29 215 99 34 316 00 23 1
10
RC-16P1N8D0000 BRC-16S1N8D0000 B
16 00 74 716 01 11 6
10
RC-17P1N8D0000 B
RC-17S1N8D0000 B
16 01 63 4
16 02 28 2
10
19-pos. (16+2+PE)RC-1RP1NRM0000 BRC-1RS1NRM0000 B
16 03 14 416 03 30 5
10
* Crimp range B: 0.14 - 0.56* Crimp range C: 1.5 - 2.5; * Crimp range D: 1.0 - 1.5
Crimping tool RC-Z2504 see page 42
Contact insert and crimp contacts rolledmale / female
RC-....N8E0000
Type Crimp range* see below
Order No. Pcs.Pkt.
RC-12P1N8E0000 ARC-12P2N8E0000 ARC-12S1N8E0000 ARC-12S2N8E0000 A
15 97 64 115 98 29 515 99 34 816 00 23 4
10
RC-17P1N8E0000 A
RC-17S1N8E0000 A
16 01 63 6
16 02 28 4
10
* Crimp range A: 0.22 - 0.56Crimping tool RC-Z2130 see page 42
–
Contact insert and screw contacts male / female
RC-....NS20000
Type Order No. Pcs.Pkt.
RC-06P1NS20000
RC-06S1NS20000
15 93 55 5
15 94 16 4
10
RC-07P1N120000RC-07S1N120000
15 94 26 315 94 55 8
10
RC-09P1NS20000
RC-09S1NS20000
15 95 53 3
15 96 45 6
10
≤ 0.75≤ 1.0
Housing type RC-0000000AD00 (panelmounting connector angled rotary) cannotbe combined with the 19-pos. crimp contactinserts RC-1RP1NRM0000 and RC-1RS1NRM0000.
For the 19-pos. (16+2+PE) crimp contactinserts RC-1RP1NRM0000 and RC-1RS1NRM0000 please order the spacersleeve RC-E0146 (Order No. 16 03 96 1)separately. This spacer sleeve ensures thePE connection to the housing.See accessories, page 43
Housingtermination
Crimp contacts/contact carriersseparate see page 38
Please note: torque for screw termination • max. 0.1 Nm for screw contacts with mating
dia. 1 mm• max. 0.2 Nm for screw contacts with mating
dia. 2 mm
38 Coninvers Circular Connectors Signal / Universal • Edition 02/08
RC / UC / TU SeriesCrimp Contact Carriers Separate
Description Contact type/Numbering
6-pos. crimp contact carrierfor contacts: 6 x Ø2.0 mm Male/Standard
Female/Standard
7-pos. crimp contact carrierfor contacts: 7 x Ø2.0 mm Male/Standard
Female/Standard
9-pos. (8+1) crimp contact carrierfor contacts: Male/Standard8 x Ø 1.0 mm, 1 x Ø2.0 mm Male/Opposite
Female/StandardFemale/Opposite
12-pos. crimp contact carrierfor contacts: 12 x Ø1.0 mm Male/Standard
Male/Opposite
Female/StandardFemale/Opposite
16-pos. crimp contact carrierfor contacts: 16 x Ø1.0 mm Male/Standard
Female/Standard
17-pos. crimp contact carrierfor contacts: 17 x Ø1.0 mm Male/Standard
Female/Standard
19-pos. (16+2+PE) crimp contact carrierfor contacts: Male/Standard16 x Ø1.0 mm, 2 x Ø 1.5 mm, 1 x Ø 1.5 mm (PE) Female/Standard
Crimp contact carriers separatemale / female
RC-....N8A...., RC-1R.1NRA....
Type Order No. Pcs.Pkt.
RC-06P1N8A0000
RC-06S1N8A0000
15 93 41 2
15 94 01 3
10
RC-07P1N8A0000
RC-07S1N8A0000
15 94 43 5
15 94 73 1
10
RC-09P1N8A0000RC-09P2N8A0000
RC-09S1N8A0000RC-09S2N8A0000
15 95 37 515 95 74 4
15 96 30 315 96 70 6
10
RC-12P1N8A0000RC-12P2N8A0000
RC-12S1N8A0000RC-12S2N8A0000
15 97 46 415 98 19 6
15 99 13 816 00 07 6
10
RC-16P1N8A0000
RC-16S1N8A0000
16 00 70 7
16 01 05 8
10
RC-17P1N8A0000
RC-17S1N8A0000
16 01 45 1
16 02 08 2
10
RC-1RP1NRA0000
RC-1RS1NRA0000
16 03 06 6
16 03 21 3
10
Type descriptionRC- 06 P1 N 8A 00 00
Series RCSignal
No. of positions06 6 16 1607 7 17 1709 9(8+1) 1R 19(16+2+PE)12 12
Contact type/numberingP1 Male (Pin)/standardP2 Male (Pin)/opposite direction S1 Female (Socket)/standardS2 Female (Socket)/opposite direction
CodingN N-Coding 0°
Contact connectionRA Crimp for 16+2+PE8A Crimp
Housing design00 blank, see housing
Cable gland00 blank, see housing
The contact carriers and the male andfemale crimp contacts can also be orderedseparately for 6 to 19-position connectors.
Other contact carriers/contactsavailable on request
For the 19-pos. (16+2+PE) crimp contactcarriers RC-1RP1NRA0000 and RC-1RS1NRA0000 please order the spacersleeve RC-E0146 (Order No. 16 03 96 1)separately. This spacer sleeve ensures thePE connection to the housing.See accessories, page 43
Direction of contact chamber numbering(view of plug-in side)
Male, clockwise(standard)
Male, counter-clockwise(opposite direction)
Female, counter-clockwise(standard)
Female, clockwise(opposite direction)
39ConinversCircular Connectors Signal / Universal • Edition 02/08
RC / UC / TU SeriesCrimp Contacts Separate
Crimp contacts separatemale / female
Rolled contacts
Type Order No. Pcs.Pkt.
RC-22P2000
RC-22S2000
16 03 32 1
16 03 32 7
10
RC-22P2000
RC-22S2000
16 03 32 1
16 03 32 7
10
Crimp contacts separatemale / female
Machined contacts
Type Order No. Pcs.Pkt.
RC-5CP2000RC-5AP2000RC-5CS2000RC-5AS2000
16 03 51 316 03 50 516 03 51 716 03 50 9
10
RC-5CP2000RC-5AP2000RC-5CS2000RC-5AS2000
16 03 51 316 03 50 516 03 51 716 03 50 9
10
RC-12P2000RC-5CP2000RC-5AP2000RC-12S2000RC-5CS2000RC-5AS2000
15 97 86 216 03 51 316 03 50 515 99 60 016 03 51 716 03 50 9
10
RC-12P2000
RC-12S2000
15 97 86 2
15 99 60 0
10
RC-12P2000RC-12S2000
15 97 86 215 99 60 0
10
RC-12P2000
RC-12S2000
15 97 86 2
15 99 60 0
10
RC-6LP2000RC-6EP2000RC-6FP2000RC-6LS2000RC-6ES2000RC-6FS2000
16 03 81 916 03 80 216 03 80 816 03 82 316 03 80 516 03 81 1
10
Crimping tool RC-Z2504 see page 42Crimping tool RC-Z2130 see page 42
Description Contact type/Crosssection [mm2)
Crimp contacts for 6-pos. contact carrier Male Ø2.0 mm/1.0-1.56 x Ø2.0 mm Male Ø2.0 mm/1.5-2.5
Female Ø2.0 mm/1.0-1.5Female Ø2.0 mm/1.5-2.5
Crimp contacts for 7-pos. contact carrier Male Ø2.0 mm/1.0-1.57 x Ø2.0 mm Male Ø2.0 mm/1.5-2.5
Female Ø2.0 mm/1.0-1.5Female Ø2.0 mm/1.5-2.5
Crimp contacts for 9-pos. (8+1)contact carrier Male Ø1.0 mm/0.14-0.568 x Ø1.0 mm. Male Ø2.0 mm/1.0-1.51 x Ø2.0 mm Male Ø2.0 mm/1.5-2.5
Female Ø1.0 mm/0.14-0.56Female Ø2.0 mm/1.0-1.5Female Ø2.0 mm/1.5-2.5
Crimp contacts for 12-pos. contact carrier Male Ø1.0 mm/0.22-0.5612 x Ø1.0 mm Male Ø1.0 mm/0.14-0.56
Female Ø1.0 mm/0.22-0.56Female Ø1.0 mm/0.14-0.56
Crimp contacts for 16-pos. contact carrier Male Ø1.0 mm/0.14-0.5616 x Ø1.0 mm Female Ø1.0 mm/0.14-0.56
Crimp contacts for 17-pos. contact carrier Male Ø1.0 mm/0.22-0.5617 x Ø1.0 mm Male Ø1.0 mm/0.14-0.56
Female Ø1.0 mm/0.22-0.56Female Ø1.0 mm/0.14-0.56
Crimp contacts for 19-pos. (16+2+PE) contact carrier Male Ø1.0 mm/0.25-0.516 x Ø1.0 mm. Male Ø1.5 mm/0.75-1.02 x Ø1.5 mm Male Ø1.5 mm (PE)/0.75-1.01 x Ø1.5 mm (PE) Female Ø1.0 mm/0.25-0.5
Female Ø1.5 mm/0.75-1.0Female Ø1.5 mm (PE)/0.75-1.0
40 Coninvers Circular Connectors Signal / Universal • Edition 02/08
RC / TU SeriesContact Inserts with Dip Solder Contacts6 to 17-Positions
Descritpion Contact type/Numbering
Dip solder contact insert 6-pos.Contacts: 6 x Ø2.0 mm Male/Standard
Female/StandardDip solder contact insert 9-pos. (6+3)Contacts: Male/Standard6 x Ø1.0 mm, 3 x Ø2.0 mm Female/StandardDip solder contact insert 9-pos. (8+1)Contacts: Male/Standard8 x Ø1.0 mm, 1 x Ø2.0 mm Female/StandardDip solder contact insert 12-pos.Contacts: 12 x Ø1.0 mm Male/Standard
Female/StandardDip solder contact insert 17-pos.Contacts: 17 x Ø1.0 mm Male/Standard
Female/Standard
Contact insert and dip solder contactsmale / female
Free solder pin length A
Type Dip solder pinØ [mm]
Order No. Pcs.Pkt.
1.5RC-06P1N220000RC-06S1N220000
15 93 39 515 94 00 2
10
6 x 0.6 / 3 x 1.5RC-63P1N220000RC-63S1N220000
16 03 63 716 03 76 4
10
8 x 0.6 / 1 x 1.5RC-09P1N220000RC-09S1N220000
16 06 99 915 96 27 9
10
0.6RC-12P1N220000RC-12S1N220000
15 97 40 215 99 07 9
10
0.6RC-17P1N220000RC-17S1N220000
16 07 00 916 07 01 1
10
Type descriptionRC- 06 P1 N 22 00 00
Series RCSignal
No. of positions06 663 9(6+3)09 9(8+1)12 1217 17
Contact type/numbering P1 Male (Pin)/standardS1 Female (Socket)/standard
CodingN N-Coding 0°
Contact connection22 Dip solder, free solder pin length A32 Dip solder, free solder pin length BA2 Dip solder, free solder pin length CC2 Dip solder, free solder pin length D
Housing design00 blank, see housing
Cable gland00 blank, see housing
Contact inserts with dip solder contactsallow efficient mounting on printed circuitboards. This reduces assembly times andwiring mistakes.
Ordering instructions:The first step is to determine the number of positions and the connection type – Male or female.
The free solder pin length A, B, C or D isthe distance between the mounting flangeof the panel mounting connector and theend of the dip solder contact. This distanceincludes the housing wall thickness and theair gap to the printed circuit board.
Further contact inserts/dip solder contacts available on request.
6-pos.
PCB hole patternsThe PCB hole diameter must be adapted in linewith the dip solder pin diameter (see above).
9 (6+3)-pos.s
Mou
ntin
g fla
nge
pane
l mou
ntin
g co
nnec
tor
Direction of contact chamber numbering(view of plug-in side)
Male, clockwise(standard)
Female, counter-clockwise(standard)
Housing type Free solder pin length
M23 A[mm]
B[mm]
C[mm]
D[mm]
RC-.......2200 3.5 4.5 10.0 17.5
RC-.......WQ00 3.5 4.5 10.0 17.5
RC-.......4200 3.5 4.5 10.0 17.5
RC-.......5200 3.5 4.5 10.0 17.5
RC-.......H000 – – 3.5 11.0
RC-.......E000 – – 3.5 11.0
41ConinversCircular Connectors Signal / Universal • Edition 02/08
Contact insert and dip solder contactsmale / female
Free solder pin length B
Type Dip solder pinØ [mm]
Order No. Pcs.Pkt.
1.5RC-06P1N320000RC-06S1N320000
16 06 99 116 06 99 4
10
6 x 1.0 / 3 x 1.5RC-63P1N320000RC-63S1N320000
16 03 64 016 03 76 7
10
8 x 1.0 / 1 x 1.5RC-09P1N320000RC-09S1N320000
16 07 00 016 07 00 3
10
1.0RC-12P1N320000RC-12S1N320000
16 07 00 616 07 00 7
10
1.0RC-17P1N320000RC-17S1N320000
16 07 01 016 07 01 3
10
Contact insert and dip solder contactsmale / female
Free solder pin length C
Type Dip solder pinØ [mm]
Order No. Pcs.Pkt.
1.5RC-06P1NA20000RC-06S1NA20000
15 93 53 115 94 14 9
10
6 x 1.2 / 3 x 1.5RC-63P1NA20000RC-63S1NA20000
16 03 64 516 03 77 4
10
8 x 1.2 / 1 x 1.5RC-09P1NA20000RC-09S1NA20000
15 95 50 715 96 42 1
10
1.2RC-12P1NA20000RC-12S1NA20000
15 97 64 316 07 00 8
10
1.2RC-17P1NA20000RC-17S1NA20000
16 01 63 816 07 01 4
10
Contact insert and dip solder contactsmale / female
Free solder pin length D
Type Dip solder pinØ [mm]
Order No. Pcs.Pkt.
1.5RC-06P1NC20000RC-06S1NC20000
16 06 99 316 06 99 6
10
6 x 1.2 / 3 x 1.5RC-63P1NC20000RC-63S1NC20000
16 03 65 116 03 77 8
10
8 x 1.2 / 1 x 1.5RC-09P1NC20000RC-09S1NC20000
15 95 51 915 96 43 4
10
1.2RC-12P1NC20000RC-12S1NC20000
15 97 66 015 99 36 7
10
1.2RC-17P1NC20000RC-17S1NC20000
16 01 64 716 02 29 5
10
9 (8+1)-pos. 12-pos. 17-pos.
Mou
ntin
g fla
nge
pane
l mou
ntin
g co
nnec
tor
Housing type Free solder pin length
Bayonet A[mm]
B[mm]
C[mm]
D[mm]
TU-.......WB00 – – 9.0 16.5
TU-.......4100 2.5 3.5 9.0 16.5
TU-.......5300 2.5 3.5 9.0 16.5
42 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Crimping pliers RC-Z2130 and RC-Z2504are used for rolled or machined crimpcontacts.Crimping tool RC-Z2504 with 4-arborpressing is suitable for crimping machinedcontacts. Detailed operating instructions areincluded in the packaging.
Crimping Tools
Contact insertion and removal tools
RC-Z2274, RC-Z2490, RC-Z2494
Type Order No. Pcs.Pkt.
RC-Z2494 16 14 12 3 1
RC-Z2274 16 04 40 9 1
RC-Z2490 16 11 80 3 1
Description
Crimping pliers for rolled RC crimp contactsØ 1 mmconnection cross section 0.08 mm2 to 0.56 mm2
Crimping pliers for machined RC crimp contactsØ 1 mm / Ø 1.5 mm / Ø 2 mmconnection cross section 0.14 mm2 to 2.5 mm2
Contact insert and removal toolfor RC crimp contacts male / female Ø 1 mm
Contact insert and removal toolfor RC crimp contacts male / female Ø 1.5 mm
Contact insert and removal toolfor RC crimp contacts male / female Ø 2 mm
Crimping tools for rolled / machined contacts
RC-Z2130, RC-Z2504
Type Order No. Pcs.Pkt.
RC-Z2130 16 04 26 7 1
RC-Z2504 16 13 82 2 1
43ConinversCircular Connectors Signal / Universal • Edition 02/08
Signal ConnectorsTools/Accessories
Pipe spanner for cable connectors and cable connecting receptacles
RC-Z2096, RC-Z2099
Type Order No. Pcs.Pkt.
RC-Z2099RC-Z2096
16 04 25 516 04 24 9
1
Description
Special pipe spannerfor cable connectorsfor cable connecting receptaclesRemoval toolfor latching rings in panel mounting connectors
Replacement latching ring, plasticfor panel mounting connectors
Spacer sleeve for cable connectors and cable connecting receptacles used with 19-pos.(16+2+PE) crimp contact insert
Removal tool for latching rings in panel mounting connectors
RC-Z...., RC-E....
Type Order No. Pcs.Pkt.
RC-Z2290 16 04 41 71
RC-Z2382 16 04 44 210
RC-E0146 16 03 96 110
The pipe spanner is used together with awrench to screw the internal sleeve to theadapter cap.
Metal protection cap
RC-Z...., TU-Z....
Type Order No. Pcs.Pkt.
RC-Z2062 16 04 22 810
RC-Z2104 16 04 26 010
RC-Z2068 16 04 23 6 10
TU-Z2317 16 06 02 510
Description Degree of protectionin locked state
Plastic dust protection cap for IP40signal connectors with M23 knurled nut
Antistatic plastic dust protection cap IP40(black) for signal connectors with M23 knurled nut
Plastic dust protection cap for IP40signal connectors with M23 external thread
Plastic dust protection cap for IP40bayonet cable connectorsTU series
Plastic dust protection cap for IP40bayonet cable connecting receptacles andpanel mounting connectors TU series
Metal dust protection cap with steel wire IP67for signal connectors with M23 knurled nut
Metal dust protection cap for IP67signal connectors with M23 external thread
Metal dust protection cap with steel wire IP67for signal connectors with M23 external thread
Metal dust protection cap with steel wire IP 67for bayonet cable connecting receptacles andpanel mounting connectors TU series
Plastic protection cap
RC-Z...., TU-Z....
Type Order No. Pcs.Pkt.
RC-Z2058 16 04 22 310
RC-Z2468 16 11 79 610
RC-Z2059 16 04 22 510
TU-Z2003 16 06 02 310
TU-Z2002 16 07 77 810
Signal ConnectorsAccessories
A range of protective caps is available toprotect the contact elements in the case ofa separate connection.This prevents the ingress of dust andmoisture.The steel wire is fixed to the housing paneland prevents the protective cap from beinglost.
44 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Replacement sickle spanner for torque screwdrivers
SF-Z0027
Type Order No. Pcs.Pkt.
SF-Z0027 16 07 45 51
Description
Torque screwdriver incl. sickle spanner for M23 connectors with knurled nut
Replacement sickle spanner for torque screwdrivers
Torque screwdriver for M23 connectors with knurled nut
SF-Z0028
Type Order No. Pcs.Pkt.
SF-Z0028 16 07 45 61
M23 ConnectorsAccessories
This tool is specially adapted to theConinvers M23 circular connectors andmakes it easier to securely screw in andrelease the knurled nut even in confinedsituations.
The tool consists of a sickle spanner and atorque screwdriver with a permanently settorque of 2.5 Nm.
45ConinversCircular Connectors Signal / Universal • Edition 02/08
M23 • UC Series Cable Gaskets
Notched sealing rings,permanent sealing rings
UC-Z....
Type Order No. Pcs.Pkt.
UC-Z2351 16 06 84 610
UC-Z2343UC-Z2344UC-Z2346UC-Z2348UC-Z2349
16 12 99 316 06 83 716 06 83 916 06 84 116 06 84 3
10
Description Cable dia.[mm]
Notched sealing rings 6/8/10/12.5/15
Permanent sealing rings9
101214
15.5
Double bracket strain relief Cable entryPg 13.5
Pg 16
Double bracket strain relief forhousings with an additional thread
UC-Z...., RC-Z....
Type Order No. Pcs.Pkt.
RC-Z2036UC-Z2039
16 04 20 616 06 83 4
10
Permanent sealing rings are also availablefor the cable connectors and cableconnecting receptacle housings in the M23UC series in addition to the universalnotched sealing rings which are included inthe scope of supply. These can be obtainedto suit the given cable diameter.Housings with an additional thread can beequipped with a second cable strain relieffor increased loads.
46 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Description
Cable connector housing,unshielded with Pg 11
Solder contact insert incl. contacts,17-pos. male
IP68 cable gland Pg 11 for unshielded applications
Cable connecting receptacle housing,unshielded with Pg 11
Solder contact insert incl. contacts,17-pos. female
Type Order No. Qty.
RC-00000001200 15 92 53 9 1
RC-17P1N120000 16 01 19 3 1
RC-Z2196 16 04 33 8 2
RC-00000007200 15 92 62 1 1
RC-17S1N120000 16 01 79 9 1
Description
Panel mounting connector straightfor front mounting
Solder contact insert incl. contacts,17-pos. female
Type Order No. Qty.
RC-00000002200 15 92 57 4 1
RC-17S1N120000 16 01 79 9 1
The signal and universal connectors have amodular design and can be provided forassembly with male or female contactsdepending on the application.
For safety reasons, only female contacts maybe used in the live part of the connector.
Ordering example: 17-position cable connection (cable connector and cable connecting receptacle)
Description
9-pos. (8+1) crimp contact carrier, male,contact chamber numbering standard
Crimp contacts separate, machined Ø 1.0 mmCrimp range 0.14-0.56 mm2
Crimp contacts separate, machined Ø 2.0 mmCrimp range 1.0-1.5 mm2
Type Order No. Qty.
RC-09P1N8A0000 15 95 37 5 1
RC-12P2000 15 97 86 2 8
RC-5CP2000 16 03 51 3 1
Ordering example: 9-position (8+1) crimp contact carrier and crimp contacts separate
Signal Connectors Ordering Information
Coninvers circular connectors are suppliedas individual components.Flexible combinations of housings, cableglands and contact inserts facilitatewarehousing.
Ordering example: 17-position panel mounting connector (receptacle)
The technical data specified by Coninvers refers exclusively to connectors. All specifications are non-binding productdescriptions.No liability for typing/printing errors. Subject to change without notice.Samples for presentation are not tested with reference to the technical properties specified in the catalog.The respectively valid General Coninvers Terms and Conditions of Suppliers, Service and Payment exclusively shall apply.You may request the valid business terms and conditions at +49 (0) 7032/92 74-0 or you can download this information athttp://www.coninvers.com/com/company/1872.jsp
47ConinversCircular Connectors Signal / Universal • Edition 02/08
AppendixIndex of order numbers in alphabetical order
Type Order No. Page
RC-12S1N120000 1598466 36RC-12S1N220000 1599079 40RC-12S1N320000 1607007 41RC-12S1N8A0000 1599138 38RC-12S1N8D0000 1599343 37RC-12S1NA20000 1607008 41RC-12S1NC20000 1599367 41RC-12S2000 1599600 39RC-12S2000 1599600 39RC-12S2000 1599600 39RC-12S2000 1599600 39RC-12S2N120000 1599614 36RC-12S2N8A0000 1600076 38RC-12S2N8D0000 1600231 37
RC-16RC-16P1N120000 1600509 36RC-16P1N8A0000 1600707 38RC-16P1N8D0000 1600747 37RC-16S1N120000 1600816 36RC-16S1N8A0000 1601058 38RC-16S1N8D0000 1601116 37
RC-17RC-17P1N120000 1601193 36RC-17P1N220000 1607009 40RC-17P1N320000 1607010 41RC-17P1N8A0000 1601451 38RC-17P1N8D0000 1601634 37RC-17P1NA20000 1601638 41RC-17P1NC20000 1601647 41RC-17P2N120000 1601727 36RC-17S1N120000 1601799 36RC-17S1N220000 1607011 40RC-17S1N320000 1607013 41RC-17S1N8A0000 1602082 38RC-17S1N8D0000 1602282 37RC-17S1NA20000 1607014 41RC-17S1NC20000 1602295 41RC-17S2N120000 1602383 36
RC-19RC-19P1N120000 1602482 36RC-19S1N120000 1602749 36
RC-1RRC-1RP1NRA0000 1603066 38RC-1RP1NRM0000 1603144 37RC-1RS1NRA0000 1603213 38RC-1RS1NRM0000 1603305 37
RC-22RC-22P2000 1603321 39RC-22P2000 1603321 39RC-22S2000 1603327 39RC-22S2000 1603327 39
RC-5ARC-5AP2000 1603505 39RC-5AP2000 1603505 39RC-5AP2000 1603505 39RC-5AS2000 1603509 39RC-5AS2000 1603509 39RC-5AS2000 1603509 39
RC-5CRC-5CP2000 1603513 39RC-5CP2000 1603513 39RC-5CP2000 1603513 39RC-5CS2000 1603517 39RC-5CS2000 1603517 39RC-5CS2000 1603517 39
RC-63RC-63P1N120000 1603538 36RC-63P1N220000 1603637 40RC-63P1N320000 1603640 41RC-63P1NA20000 1603645 41RC-63P1NC20000 1603651 41RC-63S1N120000 1603668 36RC-63S1N220000 1603764 40RC-63S1N320000 1603767 41RC-63S1NA20000 1603774 41RC-63S1NC20000 1603778 41
RC-6E ... RC-6LRC-6EP2000 1603802 39RC-6ES2000 1603805 39RC-6FP2000 1603808 39RC-6FS2000 1603811 39RC-6LP2000 1603819 39RC-6LS2000 1603823 39
RC-E ... RC-ZRC-E0146 1603961 43RC-Z2036 1604206 45RC-Z2051 1604213 23RC-Z2052 1604216 23RC-Z2053 1604218 23RC-Z2058 1604223 43RC-Z2059 1604225 43RC-Z2062 1604228 43RC-Z2068 1604236 43RC-Z2091 1604242 23RC-Z2092 1604245 23
Type Order No. Page
RC-Z2093 1604247 23RC-Z2096 1604249 43RC-Z2099 1604255 43RC-Z2104 1604260 43RC-Z2130 1604267 42RC-Z2191 1604334 23RC-Z2196 1604338 23RC-Z2202 1604345 23RC-Z2221 1604362 22RC-Z2222 1604364 22RC-Z2225 1604368 22RC-Z2227 1604370 22RC-Z2228 1604373 22RC-Z2229 1604375 22RC-Z2274 1604409 42RC-Z2290 1604417 43RC-Z2382 1604442 43RC-Z2391 1604449 22RC-Z2392 1604452 22RC-Z2393 1604454 22RC-Z2394 1604456 22RC-Z2395 1604458 22RC-Z2396 1604460 22RC-Z2398 1604462 22RC-Z2399 1604465 22RC-Z2401 1604468 22RC-Z2402 1604470 22RC-Z2403 1604472 22RC-Z2404 1604474 22RC-Z2406 1607015 23RC-Z2407 1607016 23RC-Z2409 1604479 23RC-Z2410 1604481 23RC-Z2414 1607018 23RC-Z2417 1607019 23RC-Z2425 1604491 22RC-Z2426 1604495 22RC-Z2427 1604497 22RC-Z2428 1607021 22RC-Z2429 1604500 22RC-Z2430 1604503 22RC-Z2431 1604505 22RC-Z2432 1604506 22RC-Z2433 1607022 22RC-Z2434 1604509 22RC-Z2435 1604511 22RC-Z2436 1604513 22RC-Z2437 1604516 22RC-Z2438 1604517 22RC-Z2439 1604519 22RC-Z2440 1604520 22RC-Z2441 1604522 22RC-Z2442 1604524 22RC-Z2443 1604526 22RC-Z2444 1604529 22RC-Z2445 1604532 22RC-Z2446 1604534 22RC-Z2447 1607023 22RC-Z2448 1604536 22RC-Z2449 1607024 22RC-Z2450 1604539 22RC-Z2451 1604541 22RC-Z2452 1607025 22RC-Z2453 1604545 22RC-Z2454 1604547 22RC-Z2455 1604549 22RC-Z2462 1604558 23RC-Z2463 1604561 23RC-Z2468 1611796 43RC-Z2490 1611803 42RC-Z2494 1614123 42RC-Z2504 1613822 42
RM-0000000RM-00000001100 1607026 15RM-00000001300 1605029 15RM-00000007100 1607027 15RM-00000007300 1607028 15RM-0000000Z100 1607029 15RM-0000000Z300 1607030 15
SF-ZSF-Z0027 1607455 44SF-Z0028 1607456 44
TU-0000000TU-00000004100 1605881 33TU-00000005300 1605885 33TU-00000008UDU 1605886 32TU-00000009UDU 1605888 32TU-0000000TUDU 1605891 32TU-0000000WB00 1605893 33
TU-ZTU-Z2002 1607778 43TU-Z2003 1606023 43TU-Z2317 1606025 43
UC-0000000UC-000000080DU 1606030 16UC-000000090DU 1606040 17UC-0000000F3DU 1607069 17UC-0000000FNDU 1606046 17UC-0000000N3DU 1606047 16UC-0000000NNDU 1606050 16
Type Order No. Page
UC-0000000Q0DU 1606053 17UC-0000000Q3DU 1607070 17UC-0000000QNDU 1607083 17UC-0000000R3DU 1606058 16UC-0000000RNDU 1606061 16UC-0000000T0DU 1606065 16
UC-ZUC-Z2039 1606834 45UC-Z2343 1612993 45UC-Z2344 1606837 45UC-Z2346 1606839 45UC-Z2348 1606841 45UC-Z2349 1606843 45UC-Z2351 1606846 45
Type Order No. Page
NC-NC-0000000KSFZ 1592030 14
RC-0000000RC-00000001100 1592535 15RC-00000001200 1592539 15RC-00000001300 1592546 15RC-00000002200 1592574 18RC-00000004200 1592589 20RC-00000005200 1592599 20RC-00000006100 1592604 19RC-00000007100 1592618 15RC-00000007200 1592621 15RC-00000007300 1592626 15RC-000000080FZ 1592680 14RC-000000090FZ 1592750 14RC-0000000AD00 1592777 19RC-0000000B2FZ 1592781 18RC-0000000C0FZ 1592790 20RC-0000000E000 1592813 20RC-0000000H000 1592833 20RC-0000000K0FZ 1592865 14RC-0000000M0FZ 1592899 14RC-0000000Q0FZ 1592924 20RC-0000000T0FZ 1592992 14RC-0000000WQ00 1593021 18RC-0000000Z100 1593037 15RC-0000000Z200 1593040 15RC-0000000Z300 1593044 15
RC-06RC-06P1N120000 1593072 36RC-06P1N220000 1593395 40RC-06P1N320000 1606991 41RC-06P1N8A0000 1593412 38RC-06P1N8B0000 1593525 37RC-06P1N8K0000 1606992 37RC-06P1NA20000 1593531 41RC-06P1NC20000 1606993 41RC-06P1NS20000 1593555 37RC-06S1N120000 1593645 36RC-06S1N220000 1594002 40RC-06S1N320000 1606994 41RC-06S1N8A0000 1594013 38RC-06S1N8B0000 1594145 37RC-06S1N8K0000 1606995 37RC-06S1NA20000 1594149 41RC-06S1NC20000 1606996 41RC-06S1NS20000 1594164 37
RC-07RC-07P1N120000 1594263 36RC-07P1N120000 1594263 37RC-07P1N8A0000 1594435 38RC-07P1N8B0000 1594497 37RC-07P1N8K0000 1606997 37RC-07S1N120000 1594558 36RC-07S1N120000 1594558 37RC-07S1N8A0000 1594731 38RC-07S1N8B0000 1594786 37RC-07S1N8K0000 1606998 37
RC-09RC-09P1N120000 1594887 36RC-09P1N220000 1606999 40RC-09P1N320000 1607000 41RC-09P1N8A0000 1595375 38RC-09P1N8C0000 1595501 37RC-09P1N8L0000 1607001 37RC-09P1NA20000 1595507 41RC-09P1NC20000 1595519 41RC-09P1NS20000 1595533 37RC-09P2N120000 1595600 36RC-09P2N8A0000 1595744 38RC-09P2N8C0000 1595758 37RC-09P2N8L0000 1607002 37RC-09S1N120000 1595791 36RC-09S1N220000 1596279 40RC-09S1N320000 1607003 41RC-09S1N8A0000 1596303 38RC-09S1N8C0000 1596417 37RC-09S1N8L0000 1607004 37RC-09S1NA20000 1596421 41RC-09S1NC20000 1596434 41RC-09S1NS20000 1596456 37RC-09S2N120000 1596535 36RC-09S2N8A0000 1596706 38RC-09S2N8C0000 1596724 37RC-09S2N8L0000 1607005 37
RC-12RC-12P1N120000 1596856 36RC-12P1N220000 1597402 40RC-12P1N320000 1607006 41RC-12P1N8A0000 1597464 38RC-12P1N8D0000 1597635 37RC-12P1NA20000 1597643 41RC-12P1NC20000 1597660 41RC-12P2000 1597862 39RC-12P2000 1597862 39RC-12P2000 1597862 39RC-12P2000 1597862 39RC-12P2N120000 1597867 36RC-12P2N8A0000 1598196 38RC-12P2N8D0000 1598292 37
48 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Order No. Type Page
15921592030 NC-0000000KSFZ 141592535 RC-00000001100 151592539 RC-00000001200 151592546 RC-00000001300 151592574 RC-00000002200 181592589 RC-00000004200 201592599 RC-00000005200 201592604 RC-00000006100 191592618 RC-00000007100 151592621 RC-00000007200 151592626 RC-00000007300 151592680 RC-000000080FZ 141592750 RC-000000090FZ 141592777 RC-0000000AD00 191592781 RC-0000000B2FZ 181592790 RC-0000000C0FZ 201592813 RC-0000000E000 201592833 RC-0000000H000 201592865 RC-0000000K0FZ 141592899 RC-0000000M0FZ 141592924 RC-0000000Q0FZ 201592992 RC-0000000T0FZ 14
15931593021 RC-0000000WQ00 181593037 RC-0000000Z100 151593040 RC-0000000Z200 151593044 RC-0000000Z300 151593072 RC-06P1N120000 361593395 RC-06P1N220000 401593412 RC-06P1N8A0000 381593525 RC-06P1N8B0000 371593531 RC-06P1NA20000 411593555 RC-06P1NS20000 371593645 RC-06S1N120000 36
15941594002 RC-06S1N220000 401594013 RC-06S1N8A0000 381594145 RC-06S1N8B0000 371594149 RC-06S1NA20000 411594164 RC-06S1NS20000 371594263 RC-07P1N120000 361594263 RC-07P1N120000 371594435 RC-07P1N8A0000 381594497 RC-07P1N8B0000 371594558 RC-07S1N120000 361594558 RC-07S1N120000 371594731 RC-07S1N8A0000 381594786 RC-07S1N8B0000 371594887 RC-09P1N120000 36
15951595375 RC-09P1N8A0000 381595501 RC-09P1N8C0000 371595507 RC-09P1NA20000 411595519 RC-09P1NC20000 411595533 RC-09P1NS20000 371595600 RC-09P2N120000 361595744 RC-09P2N8A0000 381595758 RC-09P2N8C0000 371595791 RC-09S1N120000 36
15961596279 RC-09S1N220000 401596303 RC-09S1N8A0000 381596417 RC-09S1N8C0000 371596421 RC-09S1NA20000 411596434 RC-09S1NC20000 411596456 RC-09S1NS20000 371596535 RC-09S2N120000 361596706 RC-09S2N8A0000 381596724 RC-09S2N8C0000 371596856 RC-12P1N120000 36
15971597402 RC-12P1N220000 401597464 RC-12P1N8A0000 381597635 RC-12P1N8D0000 371597643 RC-12P1NA20000 411597660 RC-12P1NC20000 411597862 RC-12P2000 391597862 RC-12P2000 391597862 RC-12P2000 391597862 RC-12P2000 391597867 RC-12P2N120000 36
15981598196 RC-12P2N8A0000 381598292 RC-12P2N8D0000 371598466 RC-12S1N120000 36
15991599079 RC-12S1N220000 401599138 RC-12S1N8A0000 381599343 RC-12S1N8D0000 371599367 RC-12S1NC20000 411599600 RC-12S2000 391599600 RC-12S2000 391599600 RC-12S2000 391599600 RC-12S2000 391599614 RC-12S2N120000 36
Order No. Type Page
16001600076 RC-12S2N8A0000 381600231 RC-12S2N8D0000 371600509 RC-16P1N120000 361600707 RC-16P1N8A0000 381600747 RC-16P1N8D0000 371600816 RC-16S1N120000 36
16011601058 RC-16S1N8A0000 381601116 RC-16S1N8D0000 371601193 RC-17P1N120000 361601451 RC-17P1N8A0000 381601634 RC-17P1N8D0000 371601638 RC-17P1NA20000 411601647 RC-17P1NC20000 411601727 RC-17P2N120000 361601799 RC-17S1N120000 36
16021602082 RC-17S1N8A0000 381602282 RC-17S1N8D0000 371602295 RC-17S1NC20000 411602383 RC-17S2N120000 361602482 RC-19P1N120000 361602749 RC-19S1N120000 36
16031603066 RC-1RP1NRA0000 381603144 RC-1RP1NRM0000 371603213 RC-1RS1NRA0000 381603305 RC-1RS1NRM0000 371603321 RC-22P2000 391603321 RC-22P2000 391603327 RC-22S2000 391603327 RC-22S2000 391603505 RC-5AP2000 391603505 RC-5AP2000 391603505 RC-5AP2000 391603509 RC-5AS2000 391603509 RC-5AS2000 391603509 RC-5AS2000 391603513 RC-5CP2000 391603513 RC-5CP2000 391603513 RC-5CP2000 391603517 RC-5CS2000 391603517 RC-5CS2000 391603517 RC-5CS2000 391603538 RC-63P1N120000 361603637 RC-63P1N220000 401603640 RC-63P1N320000 411603645 RC-63P1NA20000 411603651 RC-63P1NC20000 411603668 RC-63S1N120000 361603764 RC-63S1N220000 401603767 RC-63S1N320000 411603774 RC-63S1NA20000 411603778 RC-63S1NC20000 411603802 RC-6EP2000 391603805 RC-6ES2000 391603808 RC-6FP2000 391603811 RC-6FS2000 391603819 RC-6LP2000 391603823 RC-6LS2000 391603961 RC-E0146 43
16041604206 RC-Z2036 451604213 RC-Z2051 231604216 RC-Z2052 231604218 RC-Z2053 231604223 RC-Z2058 431604225 RC-Z2059 431604228 RC-Z2062 431604236 RC-Z2068 431604242 RC-Z2091 231604245 RC-Z2092 231604247 RC-Z2093 231604249 RC-Z2096 431604255 RC-Z2099 431604260 RC-Z2104 431604267 RC-Z2130 421604334 RC-Z2191 231604338 RC-Z2196 231604345 RC-Z2202 231604362 RC-Z2221 221604364 RC-Z2222 221604368 RC-Z2225 221604370 RC-Z2227 221604373 RC-Z2228 221604375 RC-Z2229 221604409 RC-Z2274 421604417 RC-Z2290 431604442 RC-Z2382 431604449 RC-Z2391 221604452 RC-Z2392 221604454 RC-Z2393 221604456 RC-Z2394 221604458 RC-Z2395 221604460 RC-Z2396 221604462 RC-Z2398 221604465 RC-Z2399 221604468 RC-Z2401 22
Order No. Type Page
1607455 SF-Z0027 441607456 SF-Z0028 441607778 TU-Z2002 43
1611611796 RC-Z2468 431611803 RC-Z2490 421612993 UC-Z2343 451613822 RC-Z2504 421614123 RC-Z2494 42
AppendixIndex of order numbers in numerical order
Order No. Type Page
1604470 RC-Z2402 221604472 RC-Z2403 221604474 RC-Z2404 221604479 RC-Z2409 231604481 RC-Z2410 231604491 RC-Z2425 221604495 RC-Z2426 221604497 RC-Z2427 221604500 RC-Z2429 221604503 RC-Z2430 221604505 RC-Z2431 221604506 RC-Z2432 221604509 RC-Z2434 221604511 RC-Z2435 221604513 RC-Z2436 221604516 RC-Z2437 221604517 RC-Z2438 221604519 RC-Z2439 221604520 RC-Z2440 221604522 RC-Z2441 221604524 RC-Z2442 221604526 RC-Z2443 221604529 RC-Z2444 221604532 RC-Z2445 221604534 RC-Z2446 221604536 RC-Z2448 221604539 RC-Z2450 221604541 RC-Z2451 221604545 RC-Z2453 221604547 RC-Z2454 221604549 RC-Z2455 221604558 RC-Z2462 231604561 RC-Z2463 23
16051605029 RM-00000001300 151605881 TU-00000004100 331605885 TU-00000005300 331605886 TU-00000008UDU 321605888 TU-00000009UDU 321605891 TU-0000000TUDU 321605893 TU-0000000WB00 33
16061606023 TU-Z2003 431606025 TU-Z2317 431606030 UC-000000080DU 161606040 UC-000000090DU 171606046 UC-0000000FNDU 171606047 UC-0000000N3DU 161606050 UC-0000000NNDU 161606053 UC-0000000Q0DU 171606058 UC-0000000R3DU 161606061 UC-0000000RNDU 161606065 UC-0000000T0DU 161606834 UC-Z2039 451606837 UC-Z2344 451606839 UC-Z2346 451606841 UC-Z2348 451606843 UC-Z2349 451606846 UC-Z2351 451606991 RC-06P1N320000 411606992 RC-06P1N8K0000 371606993 RC-06P1NC20000 411606994 RC-06S1N320000 411606995 RC-06S1N8K0000 371606996 RC-06S1NC20000 411606997 RC-07P1N8K0000 371606998 RC-07S1N8K0000 371606999 RC-09P1N220000 40
16071607000 RC-09P1N320000 411607001 RC-09P1N8L0000 371607002 RC-09P2N8L0000 371607003 RC-09S1N320000 411607004 RC-09S1N8L0000 371607005 RC-09S2N8L0000 371607006 RC-12P1N320000 411607007 RC-12S1N320000 411607008 RC-12S1NA20000 411607009 RC-17P1N220000 401607010 RC-17P1N320000 411607011 RC-17S1N220000 401607013 RC-17S1N320000 411607014 RC-17S1NA20000 411607015 RC-Z2406 231607016 RC-Z2407 231607018 RC-Z2414 231607019 RC-Z2417 231607021 RC-Z2428 221607022 RC-Z2433 221607023 RC-Z2447 221607024 RC-Z2449 221607025 RC-Z2452 221607026 RM-00000001100 151607027 RM-00000007100 151607028 RM-00000007300 151607029 RM-0000000Z100 151607030 RM-0000000Z300 151607069 UC-0000000F3DU 171607070 UC-0000000Q3DU 171607083 UC-0000000QNDU 17
49ConinversCircular Connectors Signal / Universal • Edition 02/08
50 Coninvers Circular Connectors Signal / Universal • Edition 02/08
Circular Connectors Signal and Universal 2008
MNR 52002147/21.02.2008-01AE-0004-03
© Coninvers GmbH 2008
Coninvers GmbHHeisenbergstr. 1 D-71083 Herrenberg, GermanyPhone: +49 (0) 70 32/92 74-0Fax: +49 (0) 70 32/92 [email protected]
Name
Company
Department
Address/P.O. Box
Postal Code/City
Phone/Fax
Fax Hotline: +49 (0)70 32 / 92 74 -330❏ I would like to receive further information on the following
signal connectors:
❏ I would like a personal consultation.Please arrange a date.
❏ Please quote me a price:
Type Order No. Quantity
Please send me:❏ Product Overview
Coninvers Circular Connectors.❏ Coninvers Catalog
Circular Connectors Power Applications.
Circular Connectors Signal and Universal 2008Edition 02/08
AE
-000
4-03
MN
R 5
2002
147/
21.0
2.20
08-0
1©
Con
inve
rs G
mbH
2
008