circulator & isolator application notes - emr corp · 2018. 12. 21. · 0.40 db 30+ db 60 w 1.1...
TRANSCRIPT
CIRCULATOR & ISOLATOR APPLICATION NOTES: Circulated power is the same as forward handling power.
To insure stated specifications, loads are dynamically matched to circulators during manufacturing. Isolation and insertion loss specifications areguaranteed only with EMR supplied loads.
Models with load terminations of 125 watts or higher include matched cable to load and circulator to load termination mounting bracket.
Connectors other than N female are available, please contact the factory.
Models with an “H” after the slash (/) include additional heat sinking.
Models with an “F” after the slash include a thermally activated 115 VAC forced air cooling fan for applications exceeding a 50% duty cycle (1 minuteon 1 minute off). Fans other than 115 VAC are available.
IM CONTROL PANEL APPLICATION NOTES:
The following electrical specifications apply to all EMR IM Control Panels:
VSWR: 1.15:1
Impedance: 50
Temperature Range: -22 to +140º F (-30 to +60º)
Connectors: N-Female
Finish: Textured Gray Enamel. Except for model numbers with the suffix of “/1S” which have a chem film finish
IM control panels include factory tuned isolator, harmonic filter and 19” rack mounted panel.
Models with load terminations of 125 watts or higher include matched cable to load and circulator to load termination mounting bracket.
To insure stated specifications loads are dynamically matched in circulators during manufacturing. Isolator specifications are guaranteed only withmanufacturer supplied loads.
Models with an “H” after the slash (/) include additional heat sinking.
Models with an “F” after the slash include a thermally activated 115 VAC forced air cooling for applications above 200 watts and exceeding a duty cycleof 50% (1 minute on 1 minute off). Fans using other than 115 VAC are available.
Low pass filters may be provided in place of 2nd harmonic filters for an additional charge.
CAVITY RESONATOR APPLICATION NOTES: Specify operating frequency and coupling factor with order.
Models with an “H” after the slash (/) include additional heat sinking.
Models with a “F” after the slash include a thermally activated 115 VAC forced air cooling fan for continuous duty applications. Fans using other than115 VAC are available, please contact the factory concerning your application.
Band pass cavities have adjustable coupling loops. Contact the factory for specific loss coupling ranges.
Connectors, other than those listed, are available upon request, please contact the factory with your requirements.
Band pass cavity input power ratings are for nominal 1 dB loop coupling factor. Contact the factory for loop settings at higher and lower input powers.
Cavity height dimensions do not include resonant rod height which is frequency dependent.
Insertion Loss: Dual Cavity Resonator 1.0 to 4.0 dB
Triple Cavity Resonator 1.5 to 6.0 dB
FILTER FERRITE TRANSMITTER COMBINER APPLICATION NOTES: Please refer to application notes concerning Isolators and Cavity Resonators.
Standard transmitter combiner input connectors are type N female. Contact the factory for available connector options.
If combined output power exceeds 400 watts, 7/16 DIN connectors are recommended.
Combiner insertion losses and TX-TX isolation vary according to spacing between transmit channels.
Larger cavities are available for tighter channel spacing and higher transmit power, please contact the factory.
Successful combiner expansion is dependent on existing and future frequencies, input powers, combiner physical format and many other factors.Please contact the factory for assistance with present and future antenna system design and engineering needs.
In many instances field expansion of combining systems is impractical or impossible. Often, factory optimization of expanded combiners is desirable.Contact the factory for availability of “loaner” units and quick turnaround for “in-factory” combiner expansion, refurbishment, repair and optimization.
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
INTERMODULATION CONTROL DEVICES
ModelNumber
Description FrequencyPwr:InputRefl
Bandwidth:Fixed
InsertionLoss
IsolationLoad
Termination
Actual DimensionsInchesMetric
Ship Wt.lbskg.
WFM7340/0 Circulator,
50 Watts
88-108 50 W
-
0.40 dB 30+ dB 0 1.1 x 3.45 x 3.42 28 x 88 x 87
4
1.9
WFM7340/2 Single Isolator,
15 Watt Load
88-108 30 W
15 W
0.40 dB 30+ dB 15 W 1.1 x 3.45 x 4.42
28 x 88 x 112
4
1.9
WFM7340/3 Single Isolator,
30 Watt Load
88-108 50 W
30 W
0.40 dB 30+ dB 30 W 1.1 x 3.45 x 4.42
28 x 88 x 112
4
1.9
WFM7340/4 Single Isolator,
60 Watt Load
88-108 50 W
50 W
0.40 dB 30+ dB 60 W 1.1 x 3.45 x 5.92 28 x 88 x
4
1.9
WFM7350/0 Circulator,
100 Watts
88-108 100 W
-
0.40 dB 30+ dB 0 3 1/8 x 4 1/2 x 3 7/8
80 x 115 x 99
4
1.9
WFM7350/4 Single Isolator,
60 Watt Load
88-108 100 W
60 W
0.40 dB 30+ dB 60 W 3 1/8 x 4 1/2 x 6 1/2
80 x 115 x 166
4
1.9
WFM7350/4A Single Isolator,
75 Watt Load
88-108 100 W
75 W
0.40 dB 30+ dB 75 W 3 1/8 x 4 1/2 x 7 5/8
80 x 115 x 194
5
2.3
WFM7350/5 Single Isolator,
125 Watt Load
88-108 100 W
100 W
0.40 dB 30+ dB 125 W 6 1/2 x 8 1/2 x 6 3/4
166 x 216 x 172
7
3.2
WFM7350/0H Circulator,
150 Watts
88-108 150 W
-
0.40 dB 30+ dB 0 5 1/2 x 9 3/4 x 5 1/2
140 x 248 x 140
6
2.8
WFM7340/2 WFM7340/3
WFM7340/4WFM7350/4
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
INTERMODULATION CONTROL DEVICES
ModelNumber
Description FrequencyPwr:InputRefl
Bandwidth:Fixed
InsertionLoss
IsolationLoad
Termination
Actual DimensionsInchesMetric
Ship Wt.lbskg.
WFM7350/5H Single Isolator,
125 Watt Load
88-108 150 W
125 W
0.40 dB 30+ dB 125 W 8 3/4 x 19 x 9 1/4
212 x 483 x 235
12
5.5
FM7380/6HF Single Isolator,
250 Watt Load
88-108 500 W
250 W
0.50 dB 32+ dB 250 W 8 3/4 x 19 x 11 1/2
212 x 483 x 293
25
11.4
WFM8340/00 Dual Circulator,
50 Watts
88-108 50 W
-
0.75 dB 60+ dB 0 1 5/8 x 7 1/2 x 4
42 x 191 x 102
5
2.3
WFM8340/22 Dual Isolator,
15/15 Watt Load
88-108 30 W
15 W
0.75 dB 60+ dB 15/15 W 1 5/8 x 7 1/2 x 5
42 x 191 x 127
5
2.3
WFM8340/23 Dual Isolator,
15/30 Watt Load
88-108 50 W
30 W
0.75 dB 60+ dB 15/30 W 1 5/8 x 7 1/2 x 5
42 x 191 x 127
5
2.3
WFM8340/34 Dual Isolator
30/60 Watt Load
88-108 50 W
50 W
0.75 dB 60+ dB 30/60 W 1 5/8 x 7 1/2 x 6 1/2
42 x 191 x 166
5
2.3
WFM8350/00 Dual Circulator
100 Watts
88-108 100 W
-
0.75 dB 60+ dB 0 3 1/8 x 7 1/2 x 4
80 x 191 x 102
5
2.3
WFM8340/22
WFM8340/34
WFM8340/23
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
INTERMODULATION CONTROL DEVICES
ModelNumber
Description FrequencyPwr:InputRefl
Bandwidth:Fixed
InsertionLoss
IsolationLoad
Termination
Actual DimensionsInchesMetric
Ship Wt.lbskg.
WFM8350/34 Dual Isolator,
30/60 Watt Load
88-108 100 W
60 W
0.75 dB 60+ dB 30/60 W 3 1/8 x 7 1/2 x 6 1/2
80 x 191 x 166
5
2.3
WFM8350/34A Dual Isolator,
30/75 Watt Load
88-108 100 W
75 W
0.75 dB 60+ dB 30/75 W 3 1/8 x 7 1/2 x 7 5/8
80 x 191 x 194
5
2.3
WFM8350/45 Dual Isolator,
60/125 Watt Load
88-108 100 W
100W
0.75 dB 60+ dB 60/125 W 6 1/2 x 8 1/8 x 6 3/4
166 x 207 x 172
10
4.6
WFM8350/45H Dual Isolator,
60/125 Watt Load
88-108 150 W
125 W
0.75 dB 60+ dB 60/125 W 8 3/4 x 19 x 9 1/4
223 x 483 x 235
16
7.3
7530/1S Single Isolator,
10 Watt Load
450-456 20 W
10 W
0.25 dB 30+ dB 10 W 1 1/2 x 3 5/8 x 2 1/2
39 x 93 x 64
3
1.4
W7540/2 Single Isolator,
15 Watt Load
450-456 30 W
15 W
0.25 dB 30+ dB 15 W 1 3/8 x 3 1/2 x 4 1/8
35 x 89 x 105
3
1.4
W8540/22 Dual Isolator,
15/15 Watt Load
450-456 30 W
15 W
0.40 dB 60+ dB 15/15 W 1 3/8 x 5 1/2 x 4 1/8
35 x 140 x 105
3
1.4
W7640/2 Single Isolator,
15 Watt Load
944-960 30 W
15 W
0.25 dB 30+ dB 15 W 1 3/8 x 3 1/2 x 4 1/8
35 x 89 x 105
3
1.4
W8640/22 Dual Isolator,
15/15 Watt Load
944-960 30 W
15 W
0.40 dB 60+ dB 15/15 W 1 3/8 x 5 1/2 x 4 1/8
35 x 140 x 105
3
1.4
WFM8350/34 7530/1S W7540/2
W7640/2W8540/22 W8640/22
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
ModelNumber
FrequencyIsolatorStage
Pwr:InputRefl
Bandwidth:Fixed
InsertionLoss
IsolationLoad
Termination
Actual Dimensions InchesMetric
Ship Wt.lbskg.
WFM73412 88-108 Single 30 W
15 W
0.55 dB 30+ dB 15 W 3 1/2 x 19 x 4 3/4
89 x 483 x 121
3
1.4
WFM73413 88-108 Single 50 W
30 W
0.55 dB 30+ dB 30 W 3 1/2 x 19 x 4 3/4
89 x 483 x 121
3
1.4
WFM73414 88-108 Single 50 W
50 W
0.55 dB 30+ dB 60 W 3 1/2 x 19 x 7
89 x 483 x 178
5
2.3
WFM73514 88-108 Single 100 W
60 W
0.55 dB 30+ dB 60 W 5 1/4 x 19 x 7
134 x 483 x 178
5
2.3
WFM73515 88-108 Single 100 W
100 W
0.55 dB 30+ dB 125 W 5 1/4 x 19 x 6 1/2
134 x 483 x 166
10
4.6
WFM73514A 88-108 Single 150 W
75 W
0.55 dB 30+ dB 75 W 8 3/4 x 19 x 9 1/2
223 x 483 x 242
10
4.6
WFM73515A 88-108 Single 150 W
150 W
0.55 dB 30+ dB 150 W 8 3/4 x 19 x 9 1/4
223 x 483 x 235
12
5.5
WFM73422 88-108 Dual 30 W
15 W
0.90 dB 60+ dB 15/15 W 3 1/2 x 19 x 5
89 x 483 x 127
6
2.8
WFM73423 88-108 Dual 50 W
30 W
0.90 dB 60+ dB 15/30 W 3 1/2 x 19 x 5
89 x 483 x 127
6
2.8
WFM73424 88-108 Dual 50 W
50 W
0.90 dB 60+ dB 30/60 W 3 1/2 x 19 x 6 1/2
89 x 483 x 166
6
2.8
WFM73524 88-108 Dual 100 W
60 W
0.90 dB 60+ dB 30/60 W 5 1/4 x 19 x 6 1/2
134 x 483 x 166
6
2.8
WFM73525 88-108 Dual 100 W
100 W
0.90 dB 60+ dB 60/125 W 8 3/4 x 19 x 6 1/2
223 x 483 x 166
14
6.4
WFM73524A 88-108 Dual 150 W
75 W
0.90 dB 60+ dB 30/75 W 8 3/4 x 19 x 10 1/4
223 x 483 x 261
14
6.4
WFM73525A 88-108 Dual 150 W
150 W
0.90 dB 60+ dB 60/150 W 8 3/4 x 19 x 10 1/4
223 x 483 x 261
14
6.4
W75311 450-456 Single 20 W
10 W
0.45 dB 30+ dB 10 W 3 1/2 x 19 x 3 3/8
89 x 483 x 86
5
2.3
W75412 450-456 Single 30 W
15 W
0.45 dB 30+ dB 15 W 3 1/2 x 19 x 4 3/4
89 x 483 x 121
5
2.3
W75422 450-456 Dual 30 W
15 W
0.60 dB 60+ dB 15/15 W 3 1/2 x 19 x 5
89 x 483 x 127
5
2.3
W76412 944-960 Single 30 W
15 W
0.45 dB 30+ dB 15 W 3 1/2 x 19 x 5
89 x 483 x 127
5
2.3
W76422 944-960 Dual 30 W
15 W
0.60 dB 60+ dB 15/15 W 3 1/2 x 19 x 5
89 x 483 x 127
5
2.3
BROADCAST
INTERMODULATION CONTROL DEVICES
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 88-108 MHz
ELECTRICAL SPECIFICATIONS
Model Number FM6354/SB-2 FM6367/SB-2 FM6367/SBH-2 FM6367/SBHF-2
Frequency Band (MHz) 88-108 88-108 88-108 88-108
Input Power 150 W 200 W 250 W 350 W
Insertion Loss 1 - 1.5 dB 0.6 - 1.2 dB 0.6 - 1.2 dB 0.6 - 1.2 dB
Attenuation @ +/- 1 MHz 23 dB 20 dB 20 dB 20 dB
Impedance 50 50 50 50
VSWR
Based on 200 KHz passband
1.35:1 1.35:1 1.35:1 1.35:1
Electrical Length 1/4 1/4 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Metric
4 1/2 x 19
115 x 483
7 1/2 x 19
191 x 483
7 1/2 x 19
191 x 483
7 1/2 x 19
191 x 483
Dim (Height) Inches
Metric
38 to 46 1/2
966 to 1,182
38 to 46 1/2
966 to 1,182
38 to 46 1/2
966 to 1,182
38 to 46 1/2
966 to 1,182
Connectors N Female N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
22
10.0
48
21.8
55
25.0
71
32.3
FM6354/SB-2 FM6354/SB-3
FM6367/SB-2,
FM6367/SBH-2 &
FM6367/SBHF-2
For performance plots not shown, please contact the factory.
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 88-108 MHz
ELECTRICAL SPECIFICATIONS
Model Number FM63610/SB-3 FM63710/SBH-3 FM63810/SBHF-3
Frequency Band (MHz) 88-108 88-108 88-108
I/P Power 250 W 350 W 500 W
Insertion Loss 0.9 - 1.25 dB 0.9 - 1.25 dB 0.9 - 1.25 dB
Attenuation @ +/- 1 MHz 30+ dB 30+ dB 30+ dB
Impedance 50 50 50
VSWR
Based on 200 KHz passband
1.2:1 1.2:1 1.2:1
Electrical Length 1/4 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Metric
21 x 21 1/2
534 x 648
21 x 21 1/2
534 x 648
21 x 25 1/2
534 x 648
Dim (Height) Inches
Metric
38 - 46 1/2
966 x 1182
38 - 46 1/2
966 x 1182
38 - 46 1/2
966 x 1182
Connectors N Female N Female 7/8 Flange
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
175
79.4
185
83.9
187
84.8
For performance plots not shown, please contact the factory.
FM63610/SB-2 FM63710/SBH-2
FM63810/SBHF-3
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 88-108 MHz
ELECTRICAL SPECIFICATIONS
Model Number FM63812/SB-3 FM63A12/SBH-3 FM63B12/SBHF-3
Frequency Band (MHz) 88-108 88-108 88-108
I/P Pwr, @ 1.0 dB 500 W 1000 W 2000 W
Insertion Loss 0.5 - 0.8 dB 0.5 - 0.8 dB 0.5 - 0.8 dB
Attenuation @ 1 MHz 30+ dB 30+ dB 30+ dB
Impedance 50 50 50
VSWR
Based on 200 KHz passband
1.2:1 1.2:1 1.2:1
Electrical Length 1/4 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Metric
25 1/2 x 25 1/2
534 x 648
25 1/2 x 25 1/2
534 x 648
25 1/2 x 29 1/2
648 x 753
Dim (Height) Inches
Metric
38 to 46 1/2
966 to 1182
38 to 46 1/2
966 to 1182
38 to 46 1/2
966 to 1182
Connectors 7/8 Flange 7/8 Flange 7/8 Flange
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
230
104.4
230
104.4
263
119.3
For performance plots not shown, please contact the factory.
FM63812/SB-3 FM63A12/SBHF-3
FM63A12/SBHF-2 & FM63B12/SBHF-2 FM63B12/SBHF-3
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 88-108
ELECTRICAL SPECIFICATIONS
Model Number FM6354/SN-2 FM6367/SN-2 FM6367/SNH-2
Frequency Band (MHz) 88-108 88-108 88-108
I/P Power 150 W 200 W 250 W
Insertion Loss 0.4 - 1.5 dB 0.4 - 1.5 dB 0.4 - 1.5 dB
Attenuation See Performance Plots Below
Impedance 50 50 50
Electrical Length 1/4 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Metric
4 1/2 x 19
115 x 483
7 1/2 x 19
191 x 483
7 1/2 x 19
191 x 483
Dim (Height) Inches
Metric
38 - 46 1/2
966 x 1182
38 - 46 1/2
966 x 1182
38 - 46 1/2
966 x 1182
Connectors N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
22
10.0
48
21.8
55
25.0
For performance plots not shown, please contact the factory.
FM6354/SN-2 FM6354/SN-3, FM6367/SN-3 & FM6367/SNH-3 FM6367/SN-2 & FM6367/SNH-2
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 88-108
ELECTRICAL SPECIFICATIONS
Model Number FM63610/SN-2 FM63710/SNH-2
Frequency Band (MHz) 88-108 88-108
I/P Power 200 W 250 W
Insertion Loss 0.2 - 1.0 dB 0.2 - 1.0 dB
Attenuation See Performance Plots Below
Impedance 50 50
Electrical Length 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Metric
11 x 21 1/2
280 x 648
11 x 21 1/2
280 x 648
Dim (Height) Inches
Metric
38 - 46 1/2
966 x 1182
38 - 46 1/2
966 x 1182
Connectors N Female N Female
Finish EMR Gray EMR Gray
Ship Weight: lbs.
kg.
132
59.9
139
63.1
For performance plots not shown, please contact the factory.
FM63610/SN-2 & FM63710/SNH-2
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
CAVITY RESONATORS 450-960 MHz
ELECTRICAL SPECIFICATIONS
Model Number FM6554/SB FM6554/SN FM6654/SB1-2 FM6654/SN1
Frequency Band (MHz) 450-455 450-455 944-960 944-960
I/P Power 150 W 150 W 150 W 150 W
Insertion Loss See Application Notes on Page 2
Attenuation See Performance Plots Below
Impedance 50 50 50 50
VSWR 1.25:1 or Better 1.25:1 or Better 1.25:1 or Better 1.25:1 or Better
Electrical Length 1/4 1/4 1/4 1/4
Temp Range - 22 to +140 °F
- 30 to 60 ° C
- 22 to +140 °F
- 30 to 60 ° C
- 22 to +140 °F
- 30 to 60 ° C
- 22 to +140 °F
- 30 to 60 ° C
MECHANICAL SPECIFICATIONS
Dim (D x W) Inches
Individual Cavity Metric
4 x 4
102 x 102
4 x 4
102 x 102
4 x 4
102 x 102
4 x 4
102 x 102
Dim (Height) Inches
Individual Cavity Metric
13 3/4 x 15 1/2
350 x 394
13 3/4 x 15 1/2
350 x 394
7 3/4 x 9 1/2
197 x 242
7 3/4 x 9 1/2
197 x 242
Connectors N Female N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
8
3.7
8
3.7
12
5.5
6
2.8
For performance plots not shown, please contact the factory.
FM6554/SB-2 FM6554/SB-3 FM6554/SN-2
FM6654/SB1-2 FM6654/SB1-3 FM6654/SN1-2
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
TRANSMITTER COMBINERS
ELECTRICAL SPECIFICATIONS
Model Number FM63421 FM63431 FM63441
Frequency Band (MHz) 88-108 88-108 88-108
# of Channels 2 3 4
Max. Pwr Per Channel 50 W 50 W 50 W
Min. Frequency Spacing 800 KHz 800 KHz 800 KHz
Max. Insertion Loss 2.0 dB 2.1 dB 2.2 dB
Min. Insertion Loss 1.5 dB 1.6 dB 1.7 dB
Isolation Tx-Tx 50 dB 50 dB 50 dB
Isolation Ant-Tx 35 dB 35 dB 35 dB
Impedance 50 50 50
Max. VSWR Input/Output 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1
Isolator Single Single Single
Temperature Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Cavity Dim Inches
Height Metric
38 to 46 1/2
966 to 1182
38 to 46 1/2
966 to 1182
38 to 46 1/2
966 to 1182
Finished Dim (D x W) Inches
Metric
6 1/8 x 19
156 x 483
12 1/4 x 19
312 x 483
12 1/4 x 19
312 x 483
Connectors N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
23
10.5
31
14.1
39
17.7
FM63451
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
TRANSMITTER COMBINERS
ELECTRICAL SPECIFICATIONS
Model Number FM63422 FM63432 FM63442
Frequency Band (MHz) 88-108 88-108 88-108
# of Channels 2 3 4
Max. Pwr Per Channel 50 W 50 W 50 W
Min. Frequency Spacing 800 KHz 800 KHz 800 KHz
Max. Insertion Loss 2.2 dB 2.3 dB 2.4dB
Min. Insertion Loss 1.7 dB 1.8 dB 1.9 dB
Isolation Tx-Tx 90 dB 90 dB 90 dB
Isolation Ant-Tx 70 dB 70 dB 70 dB
Impedance 50 50 50
Max. VSWR Input / Output 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1
Isolator Dual Dual Dual
Temperature Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Cavity Dim Inches
Height Metric
38 to 46 1/2
966 x 1182
38 to 46 1/2
966 x 1182
38 to 46 1/2
966 x 1182
Finished Dim (D x W) Inches
Metric
6 1/8 x 19
156 x 483
12 1/4 x 19
312 x 483
12 1/4 x 19
312 x 483
Connectors N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
23
10.5
31
14.1
39
17.7
FM63422 FM63442
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
TRANSMITTER COMBINERS
ELECTRICAL SPECIFICATIONS
Model Number FM63522/H FM63532/H FM63542/H
Frequency Band (MHz) 88-108 88-108 88-108
# of Channels 2 3 4
Max. Pwr Per Channel 100 W 100 W 100 W
Min. Frequency Spacing 800 KHz 800 KHz 800 KHz
Max. Insertion Loss 2.2 dB 2.3 dB 2.4 dB
Min. Insertion Loss 1.7 dB 1.8 dB 1.9 dB
Isolation Tx-Tx 90 dB 90 dB 90 dB
Isolation Ant-Tx 70 dB 70 dB 70 dB
Impedance 50 50 50
Max. VSWR Input / Output 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1
Isolator Dual Dual Dual
Temperature Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Finished Dim (D x W) Inches
Metric
7 3/4 x 19
197 x 483
15 1/2 x 19
394 x 483
15 1/2 x 19
394 x 483
Cavity Dim (height) Inches
Metric
38 x 46 1/2
966 x 1182
38 x 46 1/2
966 x 1182
38 x 46 1/2
966 x 1182
Connectors N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
37
16.8
56
25.5
75
34.1
FM63522/H FM63542/H
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
BROADCAST
TRANSMITTER COMBINERS
ELECTRICAL SPECIFICATIONS
Model Number FM63522/HF FM63532/HF FM63542/HF
Frequency Band (MHz) 88-108 88-108 88-108
# of Channels 2 3 4
Max. Pwr Per Channel 150 W 150 W 150 W
Min. Frequency Spacing 800 KHz 800 KHz 800 KHz
Max. Insertion Loss 2.2 dB 2.3 dB 2.4 dB
Min. Insertion Loss 1.7 dB 1.8 dB 1.9 dB
Isolation Tx-Tx 90 dB 90 dB 90 dB
Isolation Ant-Tx 70 dB 70 dB 70 dB
Impedance 50 50 50
Max. VSWR 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1
Isolator Dual Dual Dual
Temperature Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Finished Dim (D x W) Inches
Metric
12 3/4 X 19
324 X 483
25 1/2 X 19
648 X 483
25 1/2 x 19
648 x 483
Cavity Dim (height) Inches
Metric
38 to 46.5
966 x 1182
38 to 46.5
966 x 1182
38 to 46.5
966 x 1182
Connectors N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
52
23.6
65
29.5
85
39.6
FM63542/HFFM63522/HF
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]
ELECTRICAL SPECIFICATIONS
Model Number FM25321 FM25341 WFM26321 WFM26341
Frequency Band (MHz) 450-456 450-456 944-966 944-966
# of Channels 2 4 2 4
Max. Pwr Per Channel 10 W 10 W 10 W 10 W
Insertion Loss 3.8 dB 6.9 dB 3.7 dB 6.8 dB
Isolation Tx-Tx 60 dB 60 dB 60 dB 60 dB
Isolation Ant-Tx 35 dB 35 dB 35 dB 35 dB
Impedance 50 50 50 50
Max. VSWR Input / Output 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1 1.1:1 / 1.25:1
Isolator Single Single Single Single
Temperature Range - 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
- 22 to +140 °F
- 30 to +60 ° C
MECHANICAL SPECIFICATIONS
Finished Dim (D x W) Inches
Metric
1 3/4 x 19 x 11 1/4
45 x 483 x 286
1 3/4 x 19 x 11 1/4
45 x 483 x 286
1 3/4 x 19 x 11 1/4
45 x 483 x 286
3 1/2 x 19 x 11 1/4
89 x 483 x 286
Connectors N Female N Female N Female N Female
Finish EMR Gray EMR Gray EMR Gray EMR Gray
Ship Weight: lbs.
kg.
12
5.5
16
7.3
12
5.5
16
7.3
FM63522/H
FM63542/H
BROADCAST
TRANSMITTER COMBINERS
ORDERING, TERMS & POLICIESORDER PLACEMENT: All prices shown are list price, FOB factory (Phoenix Arizona - USA) and are subject to changewithout prior notice. Prices include domestic packaging and are exclusive of federal, state or local excise or sales taxes,duty or brokerage charges on export shipments. Unless otherwise negotiated freight will be prepaid and added to theinvoice.
OPERATING FREQUENCIES: Operating frequencies and power levels used in preparing EMR products are thoseprovided by the customer. Errors in operating frequencies or power levels made by EMR will be corrected at no charge.Errors due to faulty information from the customer are subject to all shipping charges and any material and/or labor costincurred by EMR Corporation to correct the order.
TERMS OF SALE: Terms of sales are C.O.D., or Cash with Order unless other terms have been established prior toshipment. Open account status will be extended upon reasonable assurance of credit worthiness. Past due accounts aresubject to a late charge of up to 2.0% monthly, beginning 30 days after the date of issuance of our valid invoices.
ORDER ACCEPTANCE: An order is considered contractually valid when a purchase order is accepted by mail, telephone,facsimile or e-mail. Cancellations made less than 15 days prior to scheduled ship date may be subject to a cancellationcharge.
CLAIMS FOR SHIPPING LOSS OR DAMAGE: All shipments will be made via the customers specified mode oftransportation. If coded “best way” the shipment will be consigned to the most economical, reliable commercial carrier.Insurance will be taken unless the customer specifically takes responsibility for shipping loss or damage. Although claimsfor loss are the responsibility of the consignee, EMR will assist in all ways in making claims and tracking for loss or damageto any of its shipment.
MODIFICATION AND DELAYS: EMR reserves the right to make design changes or modifications to any of its productswithout specific prior notification provided that such modifications do not materially reduce the value or performance of theequipment concerned. EMR will not be responsible for delays in shipment occasioned by slow or interrupted deliveries toEMR of components, materials or processes necessary to the completion of any project as originally scheduled.
PRODUCT RETURNS: Merchandise returned without having first obtained written acknowledgment from EMR may berejected. Unless otherwise authorized, credit or refund will not exceeds 90% of originally invoiced amounts, and in no eventshall include transportation costs. Return authorizations shall expire in 60 days unless otherwise specifically noted.
MECHANICAL SEALS: EMR provides mechanical seals on many of its products. These seals insure that the unit has notbeen modified or tampered with once it has left the factory. “Breaking” these seals without consent from an authorized EMRCorporation engineer or technician may void the warranty policy stated below.
STANDARD WARRANTY POLICY: EMR Corporation, hereinafter called EMR, warrants that all equipment of itsmanufacture shall be free from defects in design, material and workmanship for a period of 5 years from date of shipmentunless otherwise covered by special warranty. If any such product, entirely or in part, fails to produce the performance asset forth in the brochure, quotations or literature provided by EMR, such product will be replaced or repaired at EMR’sexpense provided that the failure was not the result of alteration, misuse, tampering, misapplication, shipping damage orvandalism. If a product failure is found to be the fault of EMR the cost of transportation to the EMR factory and its return willbe born by EMR. A reasonable charge for travel and subsistence costs will be invoiced when on-site repairs are necessary.Should EMR supply components not of its own manufacture, but specified by a customer, the warranty shall reflect theoriginal manufacturers warranty, only.
It is understood that this statement constitutes EMR’s entire and only warranty, there being no other warranties expressedor implied in law or in fact, including implied warranties of fitness. In no event shall EMR be liable for damages, either director consequential, that may be occasioned by any defect in material, workmanship or product support.
DESTINATION CONTROL STATEMENT: EMR Corporation strictly adheres to all laws and regulations of the UnitedStates Government regarding the export or re-export of our products outside the United States of America. EMRCorporation requires notification regarding the intention to export any products outside the United States of America.Information for the export or re-export requires country of ULTIMATE destination, purchasing individual(s), corporations,financial institution(s), shipping documentation, and shipping entities. This information must be disclosed and on file atEMR Corporation prior to any shipments in accordance with the Export Administration Regulations. Any action contrary toU.S. laws is strictly prohibited.
EMR Corp. 17431 N. 25th Avenue Phoenix, Arizona 85023 Toll Free:1-800-796-2875 Tel: (623) 581-2875Fax: (623) 582-9499 www.emrcorp.com e-mail: [email protected]