claber guide

“DO-IT-YOURSELF” IRRIGATION GUIDE

FREE COPY

A VITAL SOLUTIONWater is vital for the garden,for al l nature. That ’s whyClaber helps us to use thisbasic resource in the bestpossible way, by proposing anextensive range of homewatering solutions; whether itbe for above-ground, drip orunderground irrigation, you’llf ind the answer to al l yourneeds and those of yourplants. All thanks to Claber ’sunique expert ise and on-going pursuit of innovation.

THE ASSURANCE OF ALEADING NAMEEstablished in 1967, Claberwas the first Italian company inthe irrigation industry to obtainthe ISO 9001 Total QualityCertification. Over the years,the head office based in

Fiume Veneto (PN) hasbeen joined by: theClabermeteo professional divi-sion, specialised in the produc-tion of remote-controlled irriga-tion systems for large parks,farming applications and golfcourses; International bran-ches located, in France, the UKand the USA; the Water Schoolin Pasiano (PN), dedicated toapplied research and theproduction of hydroelectricity;not to mention the new plantrecently opened in Maniago(PN). Claber products aretoday used in no less than 75countries: a guarantee ofquality as big as the world itself.

EFFICIENT, PRACTICAL,ECOLOGICALOf all the water on the planet,only 2% of it is usable for

h u m a na c t i v i t i e s ,i n c l u d i n gg a r d e n i n g.Claber showshow to usewater better,saving t ime,work andabove allp r e c i o u sw a t e r . A l lClaber products,the results of scienti f icresearch, are tested andguaranteed 100%. In addi-t ion, Claber offers you thisGuide, full of useful informa-t ion and advice on how tomake your own personalisedir r igation system, from thesimple watering hose to the

underground installation fittedwith electronic water timers.You’ll discover all the secretsof the simple, efficient, cost-saving home irrigation system!

ON THE INTERNETClaber know-how and adviceare available on the websitewww.claber.it, where you canread all about Claber products,take part in the interactiveforum or get a preview of all thelatest innovations. Thanks toClaber, irrigation of tomorrow istaking shape today: who elsecan give you more?

CLABEREXPERIENCE

ABOVEGROUND IRRIGATION...4Sprinklers .................................6Hose Carts ..............................8

DRIP IRRIGATION ..................12Products ...............................14Installation guide ..................24

COLIBRÌ SYSTEM .................26Products ...............................28Planning ...............................30Installation guide ..................32

UNDERGROUND IRRIGATION .36Products ...............................37Planning ...............................42Installation guide ..................44

ELEGANTThe quality of the materials and thespecial internal structure make it lightand particularly suitable for garden use.

SILVERGREENIts exclusive multilayer structure makes itremarkably pliable, elastic and easy tohandle. The total anti-UV protectionprevents the formation of algae.

ABOVEGROUND IRRIGATIONWater is carried by hoses, with an inside diameter proportionalto the quantity of water and the distance covered. In medium-size gardens, the diameter is normally 12 or 14 mm: a largerdiameter is suitable if the garden is bigger, or when water pres-sure is low.

FLEXYFORT The extrastrong hose made to last; thesecret lies in the choice of materials andthe strong mesh inside reinforcement.

TOP BLACKThe non-toxic hose made from 100%pure material, with black exterior toprevent the formation of algae, andtransparent interior to guarantees totalwater purity.

AQUAVIVAThe strong and easy to handle hose,thanks to the special reinforcement, withanti-algae interior to ensure best waterquality, ready for all garden uses.

How to immediately find the diameter in inches of a hose. Use thispractical conversion table for inside and outside diameters. There isalso a graduated scale along the edge of the page: place it againstthe inside diameter, then compare it with the length of thecoloured lines. The red line corresponds to 1/2”,the blue to 5/8”, the yellow to 3/4” andthe green to 1”.

Trade measurements in inches and mminches mm ø inside mm ø outside

1/2" 12.5 17 5/8" 14 / 16 19 / 22 3/4" 19 24 1" 25 32.5

1 2 3 4 5

SPRAY NOZZLEPractical and rugged, this nozzle allowsthe water jet to be adjusted from fullyclosed to fully open.

PISTOL FAN SPRAYER Sprinkler jet for the more fragile plants.Remove the sprinkler head to use it asa regular adju-stable gun nozzle.

FAN SPRAYERDelivers water in pattern of small jets.This model is part icular ly recom-mended for gently watering localizedareas (f lower beds, vases, etc.),respecting the young plants. They alsohave a handy valve on the grip.

LONG FAN SPRAYIdeal for easily watering plants in hardto reach places.

"ERGO-GARDEN" SPRAY PISTOLMulti-Jet spray pistol with practical ergonomicgrip. Rotate the pistol head for different jets:from jet to soft fan wise -gentle soaker - showerand aerator spray (jetmixed with air bubbles).Very useful for wateringpotted plants. Selectordevice and lock forrequired jet.

8617 8535 8537

8922

9391

8541

A family of products designed to“ launch” water over a distance.With these spray nozzles, you canadjust the water flow according tospecific needs: from completelyclosed to concentrated, to open,through to a fine sprinkle. For extrapractical use, flow control is posi-tioned on the handle. Or for evengreater versatility, select a washingpistol with instant control trigger.

SPRAY PISTOLProfessional heavyduty spray pistol withlever adjustment of waterflow and patented blockingdevice for desired jet.

8756

SPRAY NOZZLES

8917

Claber spray nozzles are available individually, or complete with hose and tap connectors.

5

STATIONARY AND ROTATING SPRINKLERS

MULTIFUNCTION SPRINKLERMade entirely from ABS, the special roundshape makes it easy to drag over lawns.Shaped upper section for easy holdingand selecting 6 different functions.

8654

TURBOSPIKEWith a plastic spike forst icking into theground, waters withsprinkle effect.Excel lent for f lowerbeds.

ROLLINAThe exclusive 5-blade rotorbreaks the water jets to createa fine natural sprinkle.

IDROSPRAY 2000With “fan” nozzles for an evenspray and splendid fountaineffects.

TURBOSPRUZZOStationary sprinkler produces afine spray for watering roundareas.

8660

8656

IDROJET 2000Sprinkler with adjustable nozzlefor excel lent results at anywater pressure. Sprayswater in a circularpattern withl ight raineffect.

8694

Stationary sprinklers are the simplest, withoutmoving parts which increases the wateringrange. The water is delivered through one ormore nozzles, with sprinkle or spray jets. Thesemodels offer excel lent results with normaldomestic water pressure. The rotating armsprinklers are the most used. With fixed or adju-stable nozzles with different jets, they allow thewatering range to be varied and the bestworking posit ion to be found,depending on the pressure.

360°

AQUALUX 2000Rotating sprinkler with adjustablenozzles for excellent results,even with low water pressure.Waters round areas with a lightsprinkle.

86858675

8658

PULSATING SPRINKLERS

OSCILLATING SPRINKLERS

Oscillating sprinklers cover rectangular areas, watering onlywhere necessary. The area can be varied with the selector. Theswinging arm sprays a fan of water into the air, which falls gentlyjust l ike natural rain. The handy plug accessor y can beremoved for periodic cleaning of the nozzles.

IMPACT HEAD 3/4” FPulsating sprinkler head forwatering sectors or withfull rotation.

COMPACT-20 AQUA CONTROLABS swinging arm with exclusive “aquacontrol” system for varying the breadthof the watered area.

COMPACT-18 SUPER METALSwinging arm with 18 nozzles, hydraulicmotor and new large-diameterturbine.

IMPACT TRIPODImpact spr inkler on an aluminiumtripod.

IMPACT ON SPIKEImpact sprinkler mountedon a steady two-prongedspike.

8696

8810

8740 8753

The so-called “pulsating” sprinklers have a striker that breaks the waterjet to distribute it more evenly. An original adjustment ring nut selectsthe areas to be irrigated. These sprinklers provide the longest range,and are used for watering large, obstacle-free areas.

COMPACT 160 PROMOAluminium arm with 14 precision holesguaranteeing even water jets, just likenatural rain.

8721

7

8744

The hose is an important asset that will only last if cared for properly: after use, it must bedrained of all residual water and put in a dry place, out of the sunlight.

To store your garden hose neatly, without bends and twists, and to carry it without dragging,there’s nothing better than a hose-cart. Claber hose-carts also allow continuous water flow

without having to extract the hose. Just unwind the length required: water flowsthrough the hose-cart hub into the wound hose and out the other end.

HOSE REELSYour hose will last even longer on sturdy and rigid wall-mountedreels. Designed for outdoors, they have rustproof aluminiumframes, resin drums, and come in a simple kit for assemblywithout tools.

AQUA PONYThis exceptionally compact model isideal for terraces and small gardens.

KIROS KITWall-mounted hose-reel with 20 metresof ø 12-17 mm hose, 3/4” tapconnector with 1/2” reduction, 4 auto-matic fittings and spray nozzle.

8887

8945

HOSE CARTS

SILVER-ALThe new ergonomic handle makes thiscart easy to carr y and even more

compact when storing.Sturdy, lightweight rustproofaluminium frame. Reeldrum mounted in delrin

for frictionless winding.Grooved, semi-enclosed wheelsfor crossing narrowspaces.

GENIUS 60The ideal hose-cart for medium-size

gardens. Hose f i t t ingsupplied.

METAL GEMINIAll metal structure with epoxide resinsurface treatment to ensure lastingprotection. Large diameterwheels facil i tate movingand guarantee stability onevery ground surfaces.

8977

AQUAPASS SETHose cassette: only unwind the lengthrequired; it rewinds after use.

8974

METAL 60Total metal structure with epoxy resincoating to ensure a lifetime of efficientuse. Quick and easy toassemble, able to carryup to 70 m of 1/2” hose, itis ideal for medium-sizedgardens.

8862

88948891

9

What else can you do with water? Wash the car, the terrace orgarden paths, clean the boat or the camper. All this while mini-mizing water consumption with Claber “Wippy –System” water-cleaning ideas.

MALIBU SHOWERShower for the terrace, garden or camping.The steady tripod allows it to be installed onany surface. Height 200 cm.

RIVIERA SHOWERShower with spike for camping and the garden.Height 230 cm.

WIPPY CARComes in two versions: with rounded bristles for car washing, orextra-stiff for masonry surfaces, pavements, terraces, planking,and more. With 120 cm aluminium handle and adjustment valve.

SHOWERS “WIPPY-SYSTEM” WASH BRUSHES

After summer gardening, or even holidaying orcamping, cool off under the tripod shower.Usable on all surfaces, this corrosionproof all-aluminium shower connects directly to a waterhose. Completely dismantles, thus taking upvery little space.

8956

8954

8843

8841

CARRY CART

The carry cart for cleaning up and collecting leaves, grasscuttings and rubbish in disposable PVC bags: another greatClaber gardening idea!

Completely rustproof, Carry Cart canbe left outside, and uses the strongClaber bags or others commerciallyavailable.

8934

WIPPY TURBOThe water pressure causes the inside bristles toturn, for a power ful effort less washing force,without splashing. Complete with 120 cm jointedaluminium handle and adjustment valve.

ERGOGRIP

Not just ordinary tools, but ergonomic instruments offering top work efficiency and handiness. With the aerated grip, solidand attractive, thanks to double chrome plating, and moistureproof.

NARROW TRANSPLANTER

8194

PELLICANODIBBLER ANDPLANTER

8180

SMALL TWO-PRONGED

HOE

8184

SMALL RAKE

8187

THREE-PRONGEDFORK

TAPEREDPLANT DIBBLER

8185

8179

11

Supplying just the right amountof water to each plant, justwhen and where it's needed -this is the fundamental ideabehind drip irrigation. A newtechnology, with a wholerange of advantages for youand your garden friends!Frequent watering with a

perfectly measured amount ofwater, without waste, increasesoxygenation of the soil, andfavours vigorous plant growth.Now you can create your ownmade-to-measure irrigationsystem, large or small, to satisfyall your garden wateringdemands.

The starting point of the systemis the PROGRAMMABLE WATERTIMER, which automaticallymeasures the amount andfrequency of daily wateringoperations. Water is supplied tothe DRIPPERS and the MICRO-SPRINKLERS, which guaranteecontinuous, accurate flow.

Drippers can also be adjusted,to distr ibute just the rightamount of water to suit therequirements of your plants,while accounting for the natureof the soil.

SAVING WATERDrip irrigation will not only help you save time, but also that most precious resource for nature, and of course for your garden:water. The pressure required by the system is in fact lower than that of conventional systems. You can also program a lower irriga-tion frequency for CLAY SOIL, where water penetrates less than in SANDY SOIL. In this way, distributed water is used right to the verylast... drip.

Excessive or insufficient wate-ring can seriously damageyour plants. The VERSATILITY ofdrip irrigation now solves thatproblem; just observe the rightwatering procedure for thepart icular soi l, plant andclimate type, as indicated inthe table below.

33l/h.-1 BAR30 min.every day

20 min.4 times a week

10 min.2-3 times a week

20 min.every day





30 min.every day



10 min.every day



spring autumnsummer3525

2515

2010

78l/h.-1 BAR30 min.every day

33l/h.-1 BAR

2l/h.-1 BAR

40l/h.-1 BAR

IRRIGATION TIME AND FREQUENCY

DRIP IRRIGATION

In vegetable gardens, different plants demand different types of irrigation. Plants with a morefragile disposition towards water, such as tomatoes, can be irrigated by drippers, therebyeliminating the risk of water build-up and the formation of fungus. Lettuce and recently-seeded ground however require watering from above by micro-sprinklers fitted tosupport stakes, an arrangement designed to deliver a fine rain-like spray.

FLOWER BEDS AND LAWNSDrip and micro-sprinkler systems offer a wide range of solutions to meetthe requirements of all plants types and garden areas. For flowers,plants and shrubs, 90°, 180° and 360° micro-sprinklers arerecommended, as are adjustable flow and self-regulatingdrippers, all designed to save water, because it is directedstraight to the plant roots. Strip micro-sprinklers are best forlong, narrow areas, such as garden strips. Small surfaces orplants with delicate flowers? Use micro-sprinklers, for a fine,natural rain-like effect. Large areas with flower beds orlawn sections? Rotary 360° micro-sprinklers are just theanswer. All sprinklers can be installed on robust supportstakes; sprinkling height can be adjusted asrequired to actual plant height. Micro-sprinkler jets may also be modified by thespecial adjustment valve.

VEGETABLE GARDENS AND GREENHOUSES

POTTED PLANTSAround the house, on the balcony or the patio, the pot is one of the most frequent habitats for a large number of domesticplants. Drip irrigation is the single solution to the very different watering demands of your plants, and also eliminates theproblem of shifting and relocating pots around the house. ONE or MORE WATERING LINES can be created, to cater for diffe-rent irrigation time and frequency, thanks to targeted dripper types that can be easily arranged as required or set tooperate at specific times.

These battery-powered timers are the brains behind the RainJet system. Allit takes is a few seconds to set a customised program on two separatelines; the timer will automatically control watering operations at set times,even when you’re away at work or on vacation.

AQUADUE DUPLOAutomatic two-way water timer.Provides up to three irrigations a dayfor each line. Featuring justthree buttons for easyprogramming. Weeklywatering cyclesmay also beprogrammed withthe exception ofthe days you wish toomit. It is alsopossible to displaythe cycles programmedand delete those cyclesno longer required.

D U P L Oaquadue

aquauno

8410

BAR 0.5 1.0 2.0 2.5 3.0 4.0 5.0l/min 14 18 24 27 30 31 33

ELECTRONIC WATER TIMERS

AQUAUNO VIDEO-2 PLUSUsing this automatic one-line water timer youcan set 2 watering cycles a day. Featuring just

three buttons for easy programming,the large display clearly communicates

to the user all the information required bymeans of easy-to-understand symbolsand numbers. 2 Water cycle times varyfrom 1 min. to 23 hours and 59 min.Weekly watering cycles may also beprogrammed with the exception of thedays you wish to omit. It is also possibleto display the cycles programmed anddelete those cycles no longer required.

Claber presents its extensive, innovative family ofelectronic water timers. Constructed in sturdyABS, their attractive rounded forms reflect thevery latest trends in ergonomic design. And takea look at their other original features, such as the

AQUAUNO VIDEO-6 PLUS Using this automatic one-line water timer you canset 6 watering cycles a day. Featuring just three

buttons for easy programming, the largedisplay clearly communicates to the userall the information required by means of

easy-to-understand symbols andnumbers. 2 Water cycle times vary from 1min. to 23 hours and 59 min. Weeklywatering cycles may also beprogrammed with the exception of thedays you wish to omit. It is also possible todisplay the cycles programmed anddelete those cycles no longer required.

8413

8412

15 plus aquaunoAQUAUNO PRATICO

It's easy to use. Simply press the greenbutton to start the program, then the

red button when watering issufficient. Pratico memorises thetime that has elapsed betweenthe two operations and

repeats the program(maximum duration 60

minutes) at the sametime every day. A ledindicates all program-

ming phases and candisplay the timesyou have set atany moment.

8493

AQUAUNO LOGICAThe first - and most imitated - one-line

water timer, offering 15 differentpreset watering programs avai-lable at the turn of a knob, each

created on the basis ofspecific feedback from

gardening enthusiastsand the input of bota-nical and irrigation

experts. Yet anothersuccessful issue ofClaber quality and

research.

AQUAUNO VIDEO 2 AND VIDEO 6

The first timers tofeature interactive“pages” on theirgenerous display,selected by only

three keys. Two/six irrigationcycles per day (accordingto the model), each with aduration of 59 minutes,varying between oneminute and 23 hours .Different programs can beset throughout the week,even skipping certain days.

8454

8456

BAR 0.2 1.0 2.0 2.5 3.0 4.0 5.0l/min 4.5 16 22 25 27 31 35

8444

valve with diaphragm with no mechanical parts,meaning no wear and minimal consumption – infact a single 9V battery provides enough powerfor a whole year. Operating pressure in all modelsbetween 0.1 and 10 BAR.

AQUAUNO LOGICA PLUSA totally revolutionary automatic one-line

water timer containing 15 presetcycles selected using an exclusivecontrol rotary knob. Simply by turningthe knob to any one of the 15numbered notches you can set theprogram required in a matter ofseconds. All the programs availableare summarized in a diagramprinted on the cover. A led lights upwhen the distributor is in operation.8411

ACCESSORIES FOR 1/2” (13-16 MM) MAIN TUBE

PRESSURE REDUCERAutomatically reduces andmaintains inlet water pressureat a constant pressure of 1 bar(max. 10 bar). Connects to 3/4” (20/27 mm)threaded taps.

I N - L I N E F I LT E RFOR 1/2" HOSEFor water filtering indripper or microirri-

gation systems.Installed in-line,directly on the 1/2" main hose.Easy-to-clean mesh filter.

91002

MULTI-THREAD TAPCONNECTOR

To connect automatic “Quick-Click” tap fittings; female 3/4”(20-27 mm) thread and 1/2”(15-21 mm) adaptor.

DOUBLE TAP CONNECTORWith double independentadjustment for connection oftwo lines to a single water tap.Screwed onto taps with3/4” (20-27 mm) or 1/2” (15-21mm) thread.

91045

AUTOMATIC COUPLINGTo connect 1/2” (13-16 mm)main tube to an outlet withautomatic “Quick-Click” tapfitting.

3/4” AUTOMATICADAPTOR

Used to connect the pressurereducer, 1/2” (13-16 mm)main hose adaptor, 1/4” (4-6mm) threaded hose adaptor,and other accessories with3/4” female thread to elec-tronic timers.

1/2” TEE Enables coupling of three1/2” (13-16 mm) main tubesections. Blister of 2 pcs.

91071

3/4” MALE THREADEDTWO-WAY ADAPTER

For taps with 3/4” thread;enables assembly of twoelectronic timers, pressurereducers, etc.

91589

91040

Everything you need for simple, efficient connection of irrigation hoses to the main tube and the tap.

91001

91031

91494

17

1/2” SHUT-OFF VALVEFor water flow supply, shut-offand adjustment. For installation between two1/2” - (13-16 mm) main tubesections.

9134591280

1/2” 1/4” HOSETHREADED ADAPTOR

For direct connection of 1/2”(13-16 mm) and 1/4” (4-6 mm.) tubes to taps with3/4” (20-27 mm) thread.

91076

1/2” COUPLINGEnables coupling of two 1/2”(13-16 mm) main tube sections.Blister of 4 pcs.

1/2” SUPPORTSTAKE

Enables secure groundfixture of the 1/2” (13-16mm) main tube. Blisterof 8 pcs.

1/2” END STOPPERTo shut off water flow at theend of 1/2” (13-16 mm) maintube. Blister of 4 pcs.

91086

1/2” H. 3/4”-1”THREADED COUPLING

To connect 1/2” (13-16 mm)main tube to an outlet with3/4” (20-27 mm) or 1” (26-34mm) female thread (E.G. Solenoid valves).

91066

91090

91081

1/2” ELBOW COUPLING Enables coupling of two 1/2”(13-16 mm) main tubesections. Blister of 2 pcs.

1/4” 2-WAY COUPLINGUsed to branch off 1/4” (4-6mm) feeding tube sectionsfrom 1/2” (13-16 mm) maintube or to join two feedingtube sections. Blister of 10 pcs..

HOLE PUNCHER/SPANNERUsed to punch holes in 1/2”(13-16 mm) main tube. Alsoenables tightening and adju-stment of micro-sprinklers.

1/4” SHUT-OFF VALVEFor 1/4” (4-6 mm) feeding tube.Enables water flow adjustmentand shut-off. Blister of 5 pcs.

91270

1/4” TEEEnables coupling of three 1/4”(4-6 mm) feeding tubesections. Blister of 10 pcs.

HOLE PLUGSFor sealing holes on 1/2” (13-16 mm) main tube or ends of1/4” (4-6 mm) feeding tube. Blister of 10 pcs.

91170

1/4” 4-WAY COUPLINGEnables coupling of four 1/4”(4-6 mm) feeding tubesections. Blister of 10 pcs.

1/2” SUPPORTSTAKE

Enables secureground fixture of the1/2” (13-16 mm) maintube. Blister of 8 pcs.

91190

ACCESSORIES FOR 1/4” (4-6 MM) FEEDING TUBE

91155

FITTED RIGIDRISERS

Allows to r ise themicro-sprinklers andmicro-sprayers at 30cm. Screwed directlyinto the 1/2” (13-16mm) main tube.Header bag of 10 pcs.

MICRO-SPRINKLERSUPPORT STAKE

Used for overhead instal-lation of micro-sprinklersaccording to variousplant heights.Header bag of 2 pcs.

91265

91145

91260

91141

91185

19

91243

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56A/m 0.9 1.6 1.9 2.0 2.0B/m 2.6 4.8 5.6 5.8 5.8

MICRO-SPRINKLERSTRIP

Used for f lower bedsand flower boxes. Usedeither into the 1/2” (13-16 mm) main tube oron fitted rigid risers foroverhead installation. Blister of 10 pcs.

360° MICRO-MISTSPRAYER

For light mist sprinkling. Usedeither into the 1/2” (13-16 mm)main tube or on fitted rigidrisers for overhead installation. Blister of 10 pcs.

91231

A

B

BAR 0.5 1 1.5 2 2.5l/h 14 18 22 24 28Øm 1.0 0.8 0.9 0.8 0.8

91240 91242

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56Øm 1.5 1.8 2.0 2.2 2.3

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56Øm 2.4 3.2 4.6 5.6 6.2

91245

360° MICRO-SPRINKLERUsed either directly into the1/2” (13-16 mm) main tube oron f i t ted r igid r isers foroverhead installation.Blister of 10 pcs.

180° MICRO-SPRINKLERFor installation into the 1/2” (13-16 mm) main tube, the 1/4” (4-6 mm) feeding tube, or onfitted rigid risers. Suitable forwatering semi-circular areas.Blister of 10 pcs.

90° MICRO-SPRINKLERSi Used for water ing r ight-angled corners. Used eitherinto the 1/2” (13-16 mm) maintube or on fitted rigid risers foroverhead installation. Blister of10 pcs.

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56Øm 1.2 2.0 2.4 2.8 2.8

MICRO-SPRINKLERS

0-33 L/H STAKE-MOUNTED DRIPPER Flow rate is adjustable from 0 to 33 Litresper hour. Ensures precise and localised irri-gation at plant base. Flow rate is adju-stable according to various plant require-ments. Easily disassembled for cleaning. Rinse head under running water to clean.

4 L/H STAKE-MOUNTED DRIPPEREnsures precise and localised irrigation atplant roots. Fitted with open/shut-off valveand easily disassembled for cleaning underrunning water. Install at the end of 1/4” (4-6mm) feeding tube.

9122491201

BAR 0.5 1.0 1.5 2.0l/h 2.8 4.0 4.9 5.6

9124691247

91246 91247 91252

180°-360° ADJUSTABLE MICRO-SPRINKLER

(cod. 91246 - 91247)Used either directly into the 1/2” (13-16mm) main tube or on fitted rigid risersfor overhead installation. Equipped withadjustment and shut-off valve. Blister of 5 pcs.

360° ADJUSTABLEMICRO-SPRINKLER

(cod. 91252)For installation into the 1/2” (13-16mm) main tube, the 1/4” (4-6mm) feeding tube, or on fittedrigid risers. Suitable for wateringcircular areas. Equipped with flowadjustment and shut-off valve.

BAR 1 1.5 2l/h 77.8 97.3 112.3Øm 6.0 7.2 8.2

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56Øm 1.5 1.8 2.0 2.2 2.3

91252

BAR 0.5 1 1.5 2 2.5l/h 22 33 42 49 56Øm 2.4 3.2 4.6 5.6 6.2

ADJUSTABLE MICRO-SPRINKLERS

STAKE–MOUNTED DRIPPERS

POSITION 4 10 14 18 22l/h 4 13 22 34 38Øm 1.7 2.7 2.8

DRIPPERS

912099121191213

91217

0-6 L/H LINE-ENDDRIPPER

Adjustable from 0 to 6 litres forcalibrated irrigation, to plants'different needs and soil type.

0-6 L/H IN-LINE DRIPPERAdjustable from 0 to 6 litres forcalibrated irrigation, to plants'different needs and soil type.

0-6 L/H IN-LINE DRIPPERAdjustable from 0 to 6 litres forcalibrated irrigation, to plants'different needs and soil type.

0-40 L/H ADJUSTABLEDRIPPER

For direct installation into the1/2” (13-16 mm) main tube orinto the 1/4” (4-6 mm) feedingtube. Flow rate adjustable from0 to 40 litres per hour. Easilydisassembled for cleaning.

9122191226

For every type of system, terrace or garden, from seedlings to flower beds, there is a drippersuited to all your needs: with fixed or adjustable flow rate, directly installed onto the main orfeeding tube, in series, or fitted on a stake.

9035790355

90366

The main and feeding tubes make up the backbone of theentire system: a veritable water way that can be equipped withall accessory types, drippers or micro-sprinklers. The drippertubes and soaker hoses are exceptionally efficient water distri-butors, connectable by means of QUICK-CLICK couplings.

FEEDING TUBE 1/4" (4-6 mm) tube for branching off themain tube. Supplies the in-line and end-of-line drippers. Flexible and resistant to algaeformation, low temperatures and solarradiation. 5 m and 20 m coil.

MAIN TUBE 1/2" (13-16 mm) polythene tube

for the main line. Flexible and resi-stant to algae formation, lowtemperatures and solar radiation,25 m and 50 m coil.

SOAKER HOSESlowly diffuses the water through its capillary walls. Strong butflexible, designed to be laid around plants or with covering ofsoil. Continuous drainage even in freezing conditions. Suitablefor low flow rates: operating pressure 0.5-1 bar. 15 m and 25 m coil.

90365

BAR 0.5 1.0 1.5 2.0L/h 1.2 2.2 2.6 3.1

90371

HOSES

BAR 0.5 1.0 1.5 2.0l/h X m 5.5 48 66 83

90350

90351

90370DRIPPER TUBE

1/2" (13-16 mm) polythene tube. Fitted with internal 2 l/h laby-rinth drippers at 33 cm intervals which ensure even irrigationover the entire cultivated area. Reduced water consumption:operating 0.5-1 bar. 25 m and 50 m coil.

AN OASIS OF WELL-BEING FOR YOUR PLANTS

Holiday time, time for trips away, time for OASIS: the easy,versatile, definitive solution to the problem of wateringplants when away from home. OASIS is the CLABER water

distributor that guarantees made-to-measure watering forall requirements, in complete independence. It is equipped

with an electronic system offering a choice of 4 different irrigationprograms. A LED lights up to indicate when the distributor is in operation.A special internal device guarantees calibrated, constant watering. And all this with no taps left on, with no electrical connections and with noinstallation problems. You see to your holidays; OASIS will see to your plants!

23THE BEST IDEA FOR THE HOLIDAYS

Description

Distribution system

Drippers

Circuit hose

Fixing stakes

Pcs.

1

20

10 m

20

8053

321Fit the electronic water timer with thepressure reducer (code 91040) to thetap. The water is supplied through a 1/2"hose or directly by a 1/4" feeding tube;connect it to the water timer by meansof the automatic threaded connector(code 91494) and the coupling (code91345).

The 1/2" hose can be used to create averitable watering circuit ideal for largebalconies; in this case, use the 1/4"feeding tube to connect each of thedrippers.

The Claber hole puncher makes hoseholes with the exact diameter required, forwatertight connections between the hoseand feeding tubes. The tool can also beused to adjust and tighten drippers.

Installing a drip irrigation system is easy! For best results, simply follow the steps below:

PRACTICAL “DIY” INSTALLATION

54

25

Cut lengths of the 1/4" hose to measure. After makingholes in the 1/2" tube for each branching, connecteach length to the 1/2" tube by means of the 2-wayconnector (code 91155). For greater flexibility andcontrol of water flow to each branching, a tap canalso be used for each feeding tube.

Fit the drippers to the 1/4" tube in such a way that theyare near the plants to be watered, along the path ofthe tube marked out by the stakes. Once installationhas been completed, all you have to do is set thewater timer (and don’t forget to turn on the tap)!

With the new Colibrì System, all the advantages of the undergroundirrigation system are finally accessible for small gardens too. A simple,convenient idea, designed with DIY in mind, it comes complete witheverything the gardener needs: from the new Colibrì pop-up micro-sprinklers, 1/2" polyethylene tube, the push-on couplings for all types oflay-outs, through to the drainage valve (to protect the system fromeven the coldest winters) and battery-powered timers, to ensure thatlawns and gardens are watered at the best time of the day, evenwhen the owner is away or on vacation. All this, with one extra advan-tage: total Claber quality, certified ISO 9001.

Daily water requirement (in litres) 1st system full development

lawn 4 l per sq m hedge 4 l/running m 8 l/running mshrubs 8-16 l/running m as per lawngarden 3 l per square metre

COLIBRÌ SYSTEM

100 m2

50 m2

The Colibrì System has been designed especially for gardens between 50 m2 and 200 m2. As the examples show, all areas canbe covered perfectly by selecting and combing different micro-sprinkler types: 90°, 180° and 360°. Irrigating with the right amountof water is good for the garden, and for the gardener’s pocket. Water is without doubt a precious resource - and thanks to theversatility, watering uniformity and low pressure requirements of Colibrì System micro-sprinklers, you’ll be able to use it to maximumadvantage, down to the last drop. And you can also program the system watering cycles for the best possible time, whatever theclimatic conditions or the type of garden, with the help of the table shown on this page.

27

200 m2

91589

91494

3/4” AUTOMATIC ADAPTORUsed to connect the pressurereducer, 1/2” (13-16 mm)main hose adaptor, 1/4” (4-6mm) threaded hose adaptor,and other accessories with3/4” female thread to elec-tronic timers.

91345

1/2” 1/4” HOSETHREADED ADAPTOR

For direct connection of 1/2”(13-16 mm) and 1/4” (4-6 mm.) tubes to taps with3/4” (20-27 mm) thread.

3/4” MALE THREADEDTWO-WAY ADAPTER

For taps with 3/4” thread;enables assembly of twoelectronic t imers, pressurereducers, etc.

1/2” ELBOW COUPLING Enables coupling of two 1/2”(13-16 mm) main tubesections. Blister of 2 pcs.

91081

1/2” TEEEnables coupling of three1/2” (13-16 mm) main tubesections. Blister of 2 pcs.

91071

91076

1/2” COUPLING Enab les coup l i ng o f two1/2” (13-16 mm) main tubesections. Blister of 4 pcs.

1/2” (15-21 MM)THREADED ELBOW

Used for end line connection of”Colibrì” underground micro-sprin-klers (cod. 90210 - 90220 - 90230). With 1/2” (13-16 mm) to mainhose. Blister of 2 pcs.

91082

91072

1/2” (15-21 MM) THREADED 3-WAY CONNECTOR

Used for connecting under-ground ”Colibrì” micro-sprinklersin series (cod. 90210 - 90220 -90230). With 1/2” (13-16 mm)main hose. Blister of 2 pcs.

1/2” END STOPPERTo shut off water flow at theend of 1/2” (13-16 mm) maintube. Blister of 4 pcs.

91086

TUBE CLAMP

For use when pres-s u r e i n t h e 1 / 2 ”(13-16 mm) maintube exceeds 1.5

Bar. Blister of 10 pcs.

For more information onwatering timers, see

page 14.

PRODUCTS

GUARDCOLLAR

For optimuminstallation of”Colibrì” microsprinklers traps

sand and pebbles from thesoil. 1 Pc bag

90250

91096

29

9092090366

180° - 2” MICRO-SPRINKLER

Underground micro-sprinkler with lowwater consumption.Ideal for wateringvegetable patchesand small gardens,even at low pressure. Gear-driven devicemade from acetalresin. Stainless steelrange adjustmentscrews. Gentle raineffect over a 180°semi-circular area.Micro-sprinkler is

connected to the 1/2” (13-16mm) main hose by means ofthe 1/2” (15-21 mm) threadedthree way connector (cod.91072) or 1/2” (15-21 mm)threaded elbow (cod. 91082).

360° - 2” MICRO-SPRINKLER

Underground micro-sprinkler with low waterconsumption. Ideal forwatering vegetablepatches and smallgardens, even at lowpressure. Gear-drivendevice made fromacetal resin. Stainlesssteel range adjust-ment screws. Gentlerain effect over 360°circular area. Themicro-sprinkler isconnected to the 1/2”

(13-16 mm) main hose bymeans of the 1/2” (15-21 mm)threaded 3-way connector(cod. 91072) or 1/2” (15-21 mm)threaded elbow (cod. 91082).

90365

90° - 2” MICRO-SPRINKLERUnderground micro-sprinkler with low waterconsumption. Idealfor watering vege-table patches andsmall gardens, evenat low pressure. Gear-driven device madefrom acetal resin.Stainless steel rangeadjustment screws.Gentle rain effect overa 90° area. Micro-sprinkler is connectedto the 1/2” (13-16 mm)

main hose by means of 1/2”(15-21 mm) threaded 3-wayconnector (cod. 91072) or 1/2”(15-21 mm) threaded elbow(cod. 91082).

90230 90220 90210

MAIN TUBE1/2” (13-16 mm) poly-thene tube for the mainline. Flexible and resistantto algae formation, lowtemperatures and solarradiation, 25 and 50 mcoil.

THREADED DRAINAGE VALVE Used for automaticdrainage of the hose circuit.Recommended forzones subject to coldwinters.With connector for1/2” (13-16 mm)hose. Blister of 1 pcs.

To plan your own system,prepare a scale plan of yourgarden and use a compassto mark the circles (360°) orsectors (90° and 180°) of theareas to be watered, asshown in the example along-side. For best results, positionthe 90° sprinklers in thecorners, the 180° sprinklersalong the perimeter of thegarden or the house, and the360° sprinklers in open spaces.Now trace the path of themain tube to establ ish therequired length. Refer to thetable below for operatingwater pressure and per for-mance data of each sprinkler.

1 m

BAR

1,52,02,5

360°

180°

90°

l/min

3,33,74,2

3,7 m4,2 m4,5 m

r. m2

506471

1,52,02,5

1,72,02,3

4,0 m4,5 m4,7 m

25,131,834,7

1,52,02,5

1,11,31,5

4,2 m4,5 m4,7 m

13,815,917,3

PLANNING

31

8411190220

4

902101

84101

902202

902102

902304

50 m2

902202

902102

200 m2

84101

130 m2

To install the Colibrì System, proceed as follows. First of all, plant a stake at each point where a sprinkler is to be installed. Now jointhe stakes with string to trace the path that will be followed by the main tube. At this stage, use a spade to mark out a trenchalong the path, pushing the blade to full depth. There’s no need to dig; simply work the blade back and forth, as illustrated, tomake a space in the ground that is sufficient for the tube, without actually removing any soil or damaging the turf.

INSTALLATION GUIDE

33

Screw the sprinkler onto the tee and set it temporarily on the stake, for examplewith a turn of insulating tape. Proceed with another length of tube and the nextmicro-sprinkler, and so on, until you have completed the entire circuit with thelast sprinkler (or with the drainage valve or the plug).

Once the path has been marked out, connect the 1/2" tube to the timer, thenunroll it along the path and up to the first stake. Cut the tube to length with a pairof scissors, then fit the threaded tee (the connection can be made even moresecure by using a clamp).

Before laying the circuit in the trenches, test the system. Turn on thewater and check that all areas to be sprinkled are completelycovered by the 90°, 180° and 360° micro-sprinklers; if not, adjust theirrange or the angle as necessary.

Once testing has been completed and alladjustments have been made, simply laythe tube with the micro-sprinklers in the tren-ches, then remove the stakes. Tread the turfback into place, and in just a few days allsigns of the installation work will have disap-peared.

Colibrì System micro-sprinklers are desi-gned for easy and precise adjustmentboth of the watering range (i.e. thedistance covered by the waterjet) and of the operating posi-t ion (for 90° and 180°models). To adjust the

watering range, simplydisassemble the top ofthe micro-sprinkler androtate the screw with a 3mm Allen key. To alter

the jet angle, raiseand rotate themicro-sprinklershaft.

Remember tocarr y out these

operations before laying the circuit in thetrenches; bear in mind also that themicro-sprinkler is factor y-set to themaximum range.

For best results when installing Colibrìsprinklers, fit a collar (code 90250) asshown in the example, to protectthem against sand and pebbles inthe ground.

UNDERGROUND IRRIGATIONReasons for choosing a Claber Rainjet underground irrigation system There are a lot of good reasons for installing an underground automatic irrigation system:• the convenience of having your garden automatically watered, even when you’re away or on holiday (no need to find

someone to come and look after the garden);• the knowing that all areas of the garden will get the necessary amount of water, without waste, assuring maximum economy;• no hoses above ground to get in the way of the lawn mower – sprinklers are flush to the level of the lawn and are hardly noti-

ceable;• silent operation, causing no disturbance to neighbouring homes;• increased property value – no well-tended lawn can today afford to do without an automatic irrigation system.

37

SOLENOID VALVEOperates with all types of multi-line timers at 24 v. ac. With1” and 3/4”inlet and outlet thread. Body in fibre glassreinforced nylon. Optional manual opening/shut-offcontrol. Solenoid with faston type connectors. Operatingpressure from 0.5 to 12 bar.

1” E 3/4” PROGRAM. SOLENOID VALVECan be installed directly on the tap or waterwell outlet. Operates with a 9 v. battery; suffi-cient for an

PRODUCTS

CRITERIUM TIMERControls 4-6 lines. Newly designed snap-fitelectr ical wire connection system.Transparent cover to facilitate reading of setdata. Exclusive rotary knob for programselection. Check-control led system forprogrammer function monitoring. EasierProgramming with 28 pre-set programs.

COMETA TIMERLarge l iquid cr ystal display to facil i tatereading of set data. 3-button programmingsystem. Duration of irrigation from 1 minuteto 4 hours on each line. Two daily programs with 4-6 start-ups per dayWeekly programming facility (from 1 to 15days). Water budget facility to adjust set timeby 10-150%.Rain-stop push-button to inter-rupt programs in the event of rain.

SEALED CONNECTORFor connecting the solenoid valves to thewater timer. Guarantees a perfectly water-tight seal.Header bag of 2 pcs.

80148016

RAIN SENSORSuitable for all watering systems, the rain sensoravoids unnecessary wastage of water by turningthe sprinklers off when it is raining.

90035

90915

908929089390894

9089590896

WATCH OUT FOR THE COLD!In areas subject to frosts, a drainage valve should be fitted atthe lowest point of each irrigation line. When the circuit isclosed and no water is circulating, the valve automaticallyopens to release residual water, which otherwise if left to freezecould damage the hose. When water flows through the hose,the drainage valve automatic locks.

80108012

TO SPRINKLERS WATER ENTRANCE

COMPRESSION CONNECTORS AND ACCESSORIES

Circuit installation is madeeasy by compressionconnectors, with lock rings toensure a watert ight f i t andlong life. No glue or clampsrequired. For 3/4" and 1"polythene tubes.

MAIN TUBE CONNECTORFor connecting 1” input threadsolenoid valves in series. Allowsquick no tool/no teflon tapefitting.

1” F. X 1” M. ELBOWFor connecting solenoid valvesin series o-ring seal.

1” F. X 1” M. ELBOWFor connecting a solenoidvalve o-ring seal.

THREADED EXTENSIONFor f i t t ing spr inklers to thepolythene tubes (with compres-sion connectors). Can be cut tothe height desired. With 3/4”-3/4” or 3/4”-1/2” thead.

CONNECTOR F. 3/A”AND 1” THREAD

For connecting a polythenetube to a 3/4” threaded tap orsolenoid valve with male 3/4”and 1” thread. For branching off a 1/2”polythene tube with 3/4”threaded male connector.

1” AND 3/A” COUPLING For connecting a polythenetube to a female threadedwater supply or solenoid valve.

902719042090421

1” M. X 1” M. NIPPLEFor connecting solenoidvalves with o-ring seal connec-tors code 90807 - 90808.

90274904249037490524

90808

90807 90805

1” E 3/4” COUPLINGFor connecting two polythenetubes or repair ing a punc-tured tube.

9027590419

ELBOW CONNECTOR For instal lat ion on mainpolyethylene tube after cuttingand joining two tube sections.Used with 3/4” threaded exten-sion

90426-90427

90806

907569076590757

39

Ø 1” AND 3/4” ELBOWWITH F. 3/4” THREADFor connecting a threadedcoupling or drainagevalve to the end of theline.

9027390423

“T” WITH Ø 1” AND3/4”CONNECTORS

For connecting threepolythene tubes to create abranch.

9027290422

Ø 1” AND 3/4” “T” WITH3/4” THREAD

For instal lat ion on mainpolyethylene tube aftercutting and joining two tubesections. Used with 3/4”female threaded adapter

9041690418

Ø 1” AND 3/4” END-OF-LINE PLUG

For closing off one end of thepolythene tube.

9027790425

DRAINAGE VALVEFor automatic ci rcuit drai-n ing. Especial ly usefu l inareas wi th cold winters.Bronze with 3/4” male threadand reducer to 1/2”.90910

90380 - 90385 90390 - 90395

CIRCULAR VALVE BOXCircular valve box with snap closure lid. Lateral openings at the base.(Max. 1 valve).

RECTANGULAR VALVE BOXRectangular valve box with tamper-proof lid.Resistant to high and low tempera-tures and UV radiation. 90510 Max 5valves. 90515 Max a valves.

90500

Ø 1”AND 3/4” BRACKETCOUPLING

For installing a sprinkler on themain line withoutcutting the tube.Female 3/4”t h r e a d e dconnector.

90276 90450

Ø 1” AND 3/4”ELBOW

CONNECTORFor joining twopolythene tubes atright angles.

PE TUBECoils of PN6 polythene tube forcompression connectors.Flexible. Resistant to algaeformation and low tempera-tures. 25 and 50 m coil. 3/4 “and 1” thread.

9027090417

90510 - 90515

GEAR DRIVE SPRINKLERLong range jet rotating sprinkler withinterchangeable nozzles. Adjustablefrom 30° to 360° without extraction of themechanism. Slits for eliminating anysand in the water. Removable internalfilter. Silent operation due to internallubrication. 3/4” Threaded base - 4” (10 cm) riser. Adjusting spanner supplied.

90478

10 c

m

✔ = SPACING (m)

90° 180° 270° 360° RADIUS 4BAR l/min l/min l/min l/min m m1.0 1.9 9 5.8 8 6 8.4

3.9 8 11.8 15.42.0 3.3 7.2 10.8 14.4 9 12.7

7.2 14.4 21.9 28.73.0 4.8 9.3 14 18.6 12 16.9

9.3 18.6 27.8 37.4

1

2

1

2

1

2

2

4

2

4

2

4

3

6

3

6

3

6

4

8

4

8

4

8

MULTI- JET TURBINEExclusive system that allows you torapidly rotate the pop-up sprinklerrod and select 8 nozzles with differentflows and jet ranges suitable for anyarea requiring watering. The nozzleswith specially designed profile ensureuniform and balanced water distribu-tion. The special adjustment screwallows you to vary the angle of rise ofthe jets: standard angle 26° - lowangle 12°. The operating sector canbe varied from 35° to 360°. The arrowon the top of the pop-up sprinklerindicates the selected area.Extractable internal filter. Height from ground 5" (12.5 cm). 3/4" female threaded base. Adjusting spanner provided. Comes in pack of 8 Pcs. ✔ = SPACING (m)

12,5

cm

90139 ✔ ✔BAR l/min r.(m) (m) l/min r.(m) (m)2.0 3.78 9.1 12.9 5.68 11.0 15.6

7.57 9.8 13.9 11.36 11.9 16.810.98 10.1 14.3 15.90 11.3 16.015.14 9.8 13.9 20.06 10.7 15.2

3.0 4.54 9.2 13.0 6.81 11.9 16.89.08 10.7 15.1 12.87 12.5 17.7

12.87 11.0 15.6 19.03 12.2 17.317.41 10.7 15.1 24.60 11.9 16.8

1

2

3

4

1

2

3

4

1,5

3

4,5

6

1,5

3

4,5

6

41

10 c

m

7,5

cm

4” - 90006

3” - 90005

2” - 900045

cm

ADJUSTABLE POP-UPProfessional static sprinkler with 0-350° adjustablehead. The nozzle has a specially designed profileto ensure uniform and balanced water distribu-tion. The standard 1/2" female connector allows itto be mounted on existing systems.

ADJUSTABLE HEADMade of shock-resi-stant abs plastic. Filterwith support provided.Stainless steel jet rangeadjustment screw.Compatible with otherbrand sprinklers.

✔ = SPACING (m)

90° 180° 270° 360° RADIUS ✔BAR l/min l/min l/min l/min m m1,5 2,8 5,3 7,7 9,2 4,0 5,72 3,3 5,8 9,0 10,8 4,5 6,43 4,0 6,9 10,8 13,0 5,0 7,1

The new range of Claber”Pop-Up” spr inklers arebased on professionalexperience. Designed tomeet all watering require-ments, they combinesimplicity of use withoutstanding functionalcharacteristics.

BAR l/min m2 SIDES m ✔1,5 3,8 8,0 8,0x1,0 1,12 4,4 9,1 8,3x1,1 1,13 5,4 11,2 9,3x1,2 1,1

90107-108-109 -

BAR l/min m2 SIDES m ✔1,5 6,8 13,2 12,0x1,1 1,22 8,2 17,2 13,2x1,3 1,23 10,2 20,3 13,5x1,5 1,2

BAR l/min m2 SIDES m ✔1,5 8,9 36,0 6x6 5,52 10,3 49,0 7x7 6,33 12,6 64,0 8x8 7,3

90131-132-133 -

✔ = SPACING (m)

90119-120-121 -

90041-42-43 - 90044

90056

BAR l/min m2 RADIUS m ✔1,5 8,2 43,0 3,7 5,32 9,5 50,3 4,0 5,73 11,5 56,7 4,3 6,0

90053-54-55 -


90095-96-97 -


90098 90122

90110

90134

90007

PLANNINGUse a compass to mark the circumference or circle sectors reached by each sprinkler,until the entire surface is covered. For best results, position the 90° sprinklers in the cornersof patches to be watered, 180° sprinklers along garden strips, and 360° sprinklers in openspaces. The examples given in this booklet show the arrangement necessary to coverlong and narrow areas evenly. The circumferences, as seen in the examples, meet toguarantee total coverage of ground and the even distribution of water in all points. When arranging the sprinklers, refer to the recommended spacing indicated in the tableson pages 40 and 41.

DIVIDE THE AREA INTO CIRCUITSReferring to the sprinkler output table, write in the water consumption (in l/min.) next toeach sprinkler. Group the sprinklers into distinct areas (use different colours), summingprogressively the water consumption.Make sure that the water consumption in each area does not exceed the available flow.You should aim at creating a well-balanced system, i.e. each circuit should have thesame water consumption.

CHECK THE AVAILABILITY OF WATERMEASURE THE WATER

PRESSUREClose all household taps. Fit apressure gauge to an outdoortap, then open it completely(STATIC pressure). Ask yourplumber to lend you a pressuregauge, or hi re one. Take themeasurement at different timesduring the day and night.

MEASURE THE AVAILABLEWATER FLOW

Simply time how long it takes tof i l l a recipient with knownvolume.

HOW TO PLAN AN UNDERGROUND IRRIGATION SYSTEM

Container capacity (e.g. 10 litres)Q= Time taken (e.g. 20 seconds)

x 60=10

20x 60=30 litres/min

Q= flow

43

MARK THE LAYOUT OF TUBESStarting from the point where the solenoid valves controlling each single circuit willbe installed, mark in the tube connecting each valve to the sprinklers (previouslygrouped into areas), thereby drawing independent valve circuits. Since trenches willhave to be dug to lay the pipes, mark in straight lines, avoiding as far as possibledriveways, terraces and other obstacles.

The diagrams on the following pages give examples of the positioning of sprinklers. Bear in mind that:- 90° sprinklers should be positioned in garden corners;- 180° sprinklers should be positioned along garden strips;- adjustable sprinklers are best used for 270° or irregular angles;- 360° sprinklers should be positioned in central open spaces.

adjustable sprinkler



180° sprinkler90° sprinkler

180° sprinkler

360° sprinkler

90° sprinkler

90° sprinkler

180° sprinkler

180° sprinkler

FLOW RESISTANCE

Don't forget pipe FLOW RESI-STANCE: refer to the pressureloss table indicating thevalues to be subtracted fromthe original static pressureavailable.The DYNAMIC pressureobtained should be sufficientto guarantee correct sprinkleroperation.

FLOW RESISTANCE IN 3/4" AND 1" DIAMETERTUBES (IN BAR) FOR EVERY 10 METRE LENGTH

PRACTICAL “DIY” INSTALLATION

Go into the garden and turn your project into an efficientlyoperating reality. A set of solenoids controls the opening andclosing of irrigation circuits.

The water supply line to thevalves is subject to the entireamount of stat ic pressure(when the circuit is closed); forthis reason it should be madefrom a watertight metal pipe.

As a rule, the diameter of thetube connecting the valves tothe service line should not beless than the diameter of thevalves.

It is also a good idea to fit agate valve upstream to shutoff the enti re system whennecessary, for example whenmaintenance work is required.

Flow l. / min Int. diam. 3/4" Int. diam. 1"

18 0.0592 0.0202

24 0.0997 0.0341

30 0.1493 0.0511

36 0.2078 0.0712

42 0.2747 0.0941

45Once the solenoid valves have beenconnected to the main water supplypipe, take your plan and mark thepath of tubes of each sprinkler circuit.Plant a stake at each point where asprinkler is to be installed. Now join thestakes with string (or with chalk powderon the ground) to trace the l ine ofeach circuit tube, from the solenoidvalve to the sprinklers.

Use a spade to dig a trench at least20-25 cm deep. This won’t take muchof an effort, and should be enough toprotect the pipes against winter frost.

To avoid damaging the lawn, heapthe dug earth on plastic sheeting, thenremove when finished.

At each stake, place a sprinkler andthe threaded bracket extensioncoupling (before applying the exten-sion, drill a hole in the tube with a 10mm bit) on the ground.

Unroll the polythene coil, from thevalves to the stakes, along the markedpath. Put the “T” or connectorcouplings and the drainage valves inthe position for installation. Straightenthe tube properly before cutting it tolength (better too long than too short).Use a hacksaw to cut the tube; cleancut ends with a scraper before fittingcompression connectors to ensure acompletely watertight connection.

Once the desired coverage is obtainedand the circuits have been arranged, laythe tube in the trenches. Make sure thatthe sprinklers are positioned flush to theterrain surface; the threaded extensionsupport ing the spr inkler can besegmented to adjust sprinkler height.Now connect up al l tube lengths

At the end of installation, the circuit should be emptied of all residues and earth. To do so, simply unscrew the head from eachsprinkler and open the valves; the water pressure will flush the circuit clean. Screw the heads back on the sprinklers, then fill in thetrenches and level to the surrounding area (and the upper edge of the sprinklers). Your irrigation system is now complete andready for operation, controlled by an automatic watering timer.

between the sprinklers and the valves. Fixthe sprinklers in a vertical position (tiethem to the stakes with string), then openthe valve (in sequence) to test circuitoperation. Shift the sprinklers as requiredto achieve per fect coverage of thewatered ground.

47HOW TO GET FREE CLABER ADVICE

- In any case, read this booklet carefully, to get a general idea of the system.- Outline your garden on the graph sheet (available from your Claber dealer), indicating the position of your house

and any other fixtures with the symbols suggested.- Fill in the table with the water and electricity mains values available.- Write your postal address and telephone number.- Have your dealer stamped the garden plan on the graph sheet. Your dealer will then forward it to the CLABER

TECHNICAL SERVICE.- On the basis of the plan, Claber will send your dealer a system PROJECT and an ESTIMATE of the components

required.- The service is in no way binding for either party, and will not alter the terms of product guarantee.

Cop

yrig

ht©

Cla

ber

200

4 A

ll rig

hts r

eser

ved

GRA

FIC

A E

DIT

ORI

ALE

PRI

NTI

NG

S.R

.L.

UK

CLABER SPA, Via Pontebbana 22 - 33080 FIUME VENETO/PORDENONE/ITALYTEL. 0434.958836 - FAX 0434.957193 - www.claber.com - [email protected]

why

do

tco

m

claber guide

Documents