clampingtools - bell scott engineering suppliers

VicesIndustrial quality forged steel construction with swivel base,

replaceable jaws and a 10 year guarantee.

402

HandTools

All prices exclude VAT and are subject to availability

Clamping Tools

SSttoocckk LLeennggtthh ooff jjaawwss HHeeiigghhtt ooff jjaawwss CCaappaacciittyy WWeeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm KKgg

909071000 100 60 100 8.3 €€110.00909071250 125 70 125 12 €€120.00909071500 150 75 150 16 €€155.00909072000 200 90 200 22 €€195.00909072500 250 100 200 24 €€299.00

VicesHigh quality cast iron fixed base mechanics vice with excellent shock absorbing capacity and strength under compression.

Fully enclosed vice spindle designed to ensure maximum thread surface contact and constant alignment for reduced wear

and smoother operation. Jaws hardened to 45 +/-5 HRC.

SSttoocckk WWiiddtthh ooff JJaawwss TThhrrooaatt ddeepptthh JJaaww ooppeenniinngg NNeett wweeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm kkgg

909080100 125 70 150 15.7 €€78.90909080125 100 55 125 9.2 €€110.00909080150 150 80 175 21.4 €€140.00

The combination of the Metalworks, Luna and Teng Tools ranges of clamping tools offers a solution for almost everytype of clamping requirement in the automotive and industrial work places.

Metalworks now offer a choice of three types of bench vice with different styles and a choice of forged steel vices formore heavy duty industrial use.

With the Teng Tools F clamps with fast action tightening and loosening, the Teng Tools 180º swivel handle F clamps,the Luna one hand quick action clamps and the Luna bench clamps up to 3 meters in length this is one of the mostcomprehensive ranges available today.

Clamping Tools

909070100 100 60 100 8.0 €€165.00909070125 125 70 125 12.0 €€225.00909070150 150 70 150 14.0 €€275.00

Industrial quality forged steel bench vices with anvil and fixed pipe jaw. A pair of soft 150mm aluminium jaws with

rubber are avaialble for part number 909070150 - please order 909079150.

SSttoocckk LLeennggtthh ooff jjaawwss HHeeiigghhtt ooff jjaawwss CCaappaacciittyy NNeett wweeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm kkgg

26 403

Hand Tools


Clamping Tools

Glue clampsReinforced two component plastic clamps woth powerful springs.

SSttoocckk LLeennggtthh SSiizzee PPrriicceeNNoo.. mmmm mmmm

201450103 85 30 €€1.80201450202 115 40 €€2.40201450301 175 60 €€4.20201450400 210 75 €€6.00

Bench clampsGlue presses made of high strength steel, galvanised and with doubletoothing pattern. The runner is a single action type lock against thetop and bottom rails. It has a jointed handle and hex head for extratensioning, both jaws are equipped with plastic guards.

SSttoocckk SSppaann wwiiddtthh RRaaiill ssiizzee MMaaxx.. ccllaammppiinngg ffoorrccee PPrriicceeNNoo.. mmmm mmmm NN

207570102 650 40x5 10000 €€63.70207570201 1000 40x5 10000 €€78.90207570300 1500 40x5 10000 €€86.20207570409 2000 40x5 10000 €€89.50207570508 2500 40x5 10000 €€96.40207570607 3000 40x5 10000 €€103.30

One hand clampsOne hand clamp with quick setting. The fixed jaw is reversible for internal clamping and stretching outwards. The clamping force is 150kg.

SSttoocckk SSppaann wwiiddtthh TThhrrooaatt ddeepptthh PPrriicceeNNoo.. mmmm mmmm

208570101 150 85 €€26.70208570200 300 85 €€34.30208570309 450 85 €€40.50208570408 600 85 €€43.90

Screw clampsA heavy duty square threaded bronzed screw with plastic protected balljointed shoe with a wooden handle. Made of hard iron, the bar is madeof high polished galvanised steel. Extra shoes are available on request.

SSttoocckk CCllaammppiinngg wwiiddtthh TThhrrooaatt ddeepptthh BBaarr ddiimmeennssiioonnss WWeeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm kkgg

209520105 120 60 20x5 0.45 €€27.00209520204 150 80 25x6 0.75 €€29.60209520303 200 100 30x8 1.12 €€44.20209520402 250 120 30x8 1.67 €€45.90209520501 300 120 30x8 1.67 €€53.90209520600 300 140 35x9 2.14 €€64.30209520709 400 140 35x9 2.35 €€65.60209520808 400 175 35x9 2.74 €€74.00209520907 500 120 30x8 2.03 €€57.10209521004 500 175 35x9 2.05 €€75.80209521103 800 120 30x8 2.50 €€71.70209521202 1000 175 35x9 4.00 €€102.60

Screw clamps replacementsReplacement plastic protected shoes.

SSttoocckk TToo FFiitt PPrriicceeNNoo..

209522002 209520105 €€2.30209521201 209520204 €€2.60209522200 209520303/209520402/209520501/209521103 €€3.30209522309 209520600/209520709/209520808/209520907/209521004/209521202 €€3.90

404

Hand Tools


Clamping Tools

ClampsF Clamps with a fixed handle for fast action tightening and loosening

SSttoocckk SSppaann TThhrrooaatt ddeepptthh BBaarr ddiimmeennssiioonn WWeeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm KKgg

CMF16 160 80 16.5x7.5 0.48 €€42.20CMF20 200 100 19.5x9.5 0.9 €€54.00CMF25 250 120 22x10.5 1.21 €€66.90CMF30 300 140 25x12 1.80 €€86.00CMF35 300 120 25x12 1.72 €€84.20

F clamps with a 180o swivel handle for extra torque and fast action tightening and loosening.

Ergonomic bi material grip for added comfort.

SSttoocckk SSppaann TThhrrooaatt ddeepptthh BBaarr ddiimmeennssiioonn WWeeiigghhtt PPrriicceeNNoo.. mmmm mmmm mmmm KKgg

CMF16T 160 80 16.5x7.5 0.57 €€41.30CMF20T 200 100 19.5x9.5 1.01 €€57.20CMF25T 250 120 22x10.5 1.33 €€63.70CMF30T 300 140 25x12 1.96 €€81.00CMF35T 300 100 25x12 1.14 €€86.40

Metalworking pliers4 piece set containing C clamp, welding,

sheet metal and 6” long nose power grip pliers. Supplied in the Teng Tools PS storage tray.

TTPSPG 4 power grip pliers with PS tray(570x262x73mm, 2.32 kilos)

Power grip pliers 11” C clamp, 9” welding grip, 8” sheet metal grip, 6” long nose

TTPSPG €€88.40

Stock No PRICE

Clamping pliersC Clamp Power Grip Pliers, plated. Chrome vanadium.

Self locking, with release lever. With locking nut on adjustment knob for pre-setting.

406 280 11 80 772 €€25.90

11” C Clamp Power Grip Pliers, plated with swivel pads. Chrome vanadium. Self locking, with release lever.

With locking nut on adjustment knob for pre-setting.

SSttoocckk LLeennggtthh LLeennggtthh CCaappaacciittyy WWeeiigghhtt PPrriicceeNNoo.. mmmm iinncchh mmmm

406P 280 11 80 772 €€33.50


26 405

Hand Tools


Clamping Tools

Clamping pliersWelding Power Grip Pliers, plated. Chrome vanadium. Self locking, with release lever. With locking nut on adjustment knob for pre-setting.

407 230 9 65 580 €€25.90

Sheet Metal Power Grip Pliers, plated. Chrome vanadium. Self locking, with release lever. With locking nut on adjustment knob for pre-setting.

408 230 8 65 580 €€25.90



Self levelling 12” clamp pliers, plated. Chrome vanadium. Self locking, with release lever. With locking nut on adjustment knob for pre-setting.

409P 300 12 65 580 €€31.50


Cutting Tools

The Cutting EdgeFor those needing a selection of cutting tools Teng Tools have developed a special Cutting Edge pack. The 700-PRO5 set includes the Teng Tools utility knife, mini 6" hacksaw and the 12" professional quality hack saw. Another very useful set is a 5 piece set in a double Teng Tools TC tray, thisset includes the heavy duty utility knife together with tin snips, electricians scissors and a heavy duty cable cutter. Two simple sets that give Teng Tools the cutting edge over other brands!

Cutting toolsSet containing two tin snips, utility knife, scissors and a HD cable cutter in double width TC tray with removable lid.

TTDCT05 5 piece Cutting Tool Set(265x284x50mm, 2.06 kilos)

Tin Snips (491) Straight/rightTin Snips (492) Straight/leftUtility knife (710N)Scissors (497)HD Cable Cutters (496) Capacity 2AWG

TTDCT05 €€98.30

Stock No PRICE

406

Hand Tools


Cutting Tools

Tin SnipsTin Snips with spring loaded high leverage handles, safety lock,

hanging hole and two component handles for comfortable cutting.CrMo steel, hot drop forged cutting blades give an increased

cutting capacity of 1.5mm steel or 0.9mm stainless steel.

SSttoocckk nnoo.. TTyyppee HHaannddllee CCaappaacciittyy PPrriicceeccoolloouurr mmmm

490 Straight Yellow 0.1-5 €€21.50491 Straight/Right Grey 0.1-5 €€21.50492 Straight/Left Red 0.1-5 €€21.50

Tin Snips

A range of high quality tin snips with a choice of styles to suit different applications that in independent tests outperformed all other brands• Designed and manufactured from high tensile steel and in accordance with DIN and ANSI standards for professional automotive and industrial applications

• Central fastening for locking when not in use• Double, over wound, high torsional strength spring designed for frequent use• Soft two component handles with non slip design for more comfortable use with a secure grip• Serrated cutting edges manufactured from chrome molybdenum alloy steel for stable cutting with minimal slippage• Induction hardened cutting edges (60-62HRC) cut up to 1.5mm cold rolled steel or 0.9mm stainless steel• Hanging hole incorporated in to the handle for convenient storage • Available in straight, straight/right or straight/left with two models for different styles of cutting • Available individually but also as a set using the Teng Tools double TC tray

Straight, long cut tin snips with serrated edges on hot drop forgedblades in CrMo alloy steel induction hardened to HRC60-62 with a

full cutting length of 3” giving a cutting capacity of 0.94mm for coldrolled steel and 0.53mm for stainless steel. Overall length 290mm.

SSttoocckk TTyyppee CCaappaaccttiittyy PPrriicceeNNoo.. mmmm

495 Straight, long cut 0-0.94 €€22.50

Tin Snips, offset type for right and left cutting. Two component handles for comfortable cutting.

Capacity 1.5mm steel or 0.9mm stainless steel.

SSttoocckk nnoo.. TTyyppee CCaappaacciittyy PPrriicceemmmm

493 Off set/Right 0.1-5 €€24.90494 Off set/Left 0.1-5 €€24.90

Heavy Duty cable cutter. Chrome Molybdenum alloy steel blades arehardened to help maintain the cutting edges. Compound leverage

increases cutting power while reducing the cutting effort. Also included is a new quick and simple spring free automatic latch

design (one hand release) providing safety and convenience. Cuts copper and aluminium electric cables up to size

2AWG 14mm2 HRC60-62. Two component handles for comfortable cutting. Drop forged

496 250 12 14.0 (2AWG) €€23.60

SSttoocckk nnoo.. LLeennggtthh CCaappaacciittyy MMaaxx..ccaabbllee ssiizzee PPrriicceemmmm mmmm mmmm22

26 407

Hand Tools


Cutting Tools

ScissorsScissors with high carbon stainless steel blade. Bi-material grip for added comfort.

497 138 42.0 22.0 €€28.60

Bolt CuttersHardened central cutting edge (cutting angle 30°). Compound action. Equipped with centering screw that gives increased safety when cutting. Tubular handles with plastic grips.

SSttoocckk LLeennggtthh LLeennggtthh CCaappaacciittyy WWeeiigghhtt PPrriicceeNNoo.. mmmm iinncchh gg

BC414 350 14” 7mm HRC15 or 4mm HRC40 1000 €€59.90BC418 450 18” 8mm HRC15 or 5mm HRC40 1600 €€75.00BC424 600 24” 10mm HRC15 or 6mm HRC40 2500 €€89.90BC430 750 30” 13mm HRC15 or 7mm HRC40 3500 €€120.00BC436 900 36” 16mm HRC15 or 8mm HRC40 5000 €€139.90

SSttoocckk LLeennggtthh BBllaaddee lleennggtthh CCaappaacciittyy ssoofftt PPrriicceeNNoo.. mmmm mmmm mmmm

Spare jaws for Teng Tools bolt cutters.

SSttoocckk nnoo.. SSuuiittaabbllee ffoorr PPrriicceebboolltt ccuutttteerr

BC414J BC414 €€29.50BC418J BC418 €€37.60BC424J BC424 €€45.50BC430J BC430 €€61.20BC436J BC436 €€78.70

Pipe CuttersFor copper and brass pipe. One thin cutting wheel and two rollers. The tool has a constant length and is ideal for use in confined spaces.

TF22 3-22mm (1/8”-7/8”) €€12.40

Heavy duty cutter complete with spare blade and retractable reamer.

TF30 3-32MM (1/8”-1 1/4”) €€21.80

SSttoocckk nnoo.. CCaappaacciittyy PPrriiccee

SSttoocckk nnoo.. CCaappaacciittyy PPrriiccee

Replacement blade for TF22 and TF30 pipe cutters.

TF2230RK Replacement blade for TF22 and TF30 pipe cutters €€6.30

SSttoocckk nnoo.. TTyyppee PPrriiccee

408

Hand Tools


Cutting Tools

Brake toolsComprehensive tube flaring kit, suitable for copper, brass and thinwalled aluminium tubing. 45o tube press flare pipes from 3/16” to 5/8”

diameter. The pipe cutter can cut up to 30mm diameter. Includes spare cutting wheel inside the handle.

TTTF10 10 piece Double Flaring Tool Set(265x142x50mm, 1.70 kilos)

Pipe Cutter 3-32mm (1/8”- 1 1/4”)2 piece double flaring tool setAdaptors 4, 4.75 (3/16”), 6 (1/4”), 8 (5/16”), 10,12, 14mm

TTTF10 €€83.20

The Cutting EdgeThe Cutting Edge is a special pack including the

Teng Tools utility knife, junior hacksaw and 12” hacksaw.

700-PRO5 €€39.90

Stock No PRICE

Stock No PRICE

Hacksaw frameProfessional quality steel hacksaw frame with ergonomically designed aluminium handle and 12” Swedish M2 HSS 24 teeth blade. Includes

facilities for presetting at 45 degree or 90 degree cutting angle or for use as a key hole saw. Includes storage space for extra blades.


701 Hacksaw frame €€25.90702 2 spare blades 24 teeth €€7.60

Mini hacksawProfessional quality mini hacksaw frame with 6 position blade setting

and complete with 3 6” hacksaw blades.


705 Mini hacksaw frame €€8.90705-5 5 spare blades €€5.30

Gun saw3 piece Gun Saw set complete with 24 teeth blade for cutting metal

and 10 teeth blade for cutting wood or plastic. Ergonomically designed grip with 4 position locking mechanism.


703 3 piece Gun Saw set €€23.80703-10 10 teeth blade for cutting wood or plastic €€8.20703-24 24 teeth blade for cutting metal €€8.20

26 409

Hand Tools


Cutting Tools

Hacksaw holderHacksaw holder in plastic with a non slip handle with 12” blade. Can be used as a key hole saw.

704 €€8.00

Stock No PRICE

Utility knifeHeavy duty utility knife with retractable blade. Supplied complete with two spare blades.


710 Utility knife €€7.20710-5 5 spare blades €€5.30

Heavy duty utility knife with ergonomically designed handle including a non slip section for better grip. A 3 step blade adjustment. Quick opening and closing action and with spare blade storage inside handle. Supplied with 2 blades.


710N Utility knife €€13.30710-5 5 spare blades €€5.30

Air saw bladesMetal saw blades and needle files for micro air saws.

SSttoocckk DDeessccrriippttiioonn NNuummbbeerr ooff tteeeetthh NNuummbbeerr ooff ppiieecceess PPrriicceeNNoo..

208690404 Metal saw blade 18 5 €€17.50208690503 Metal saw blade 24 5 €€17.50208690602 Metal saw blade 32 5 €€17.50

Circular saw bladesCircular saw blades with tungsten carbide teeth for cutting and splitting of all types of wood, and for sawing different types of board. Manufactured with hardened main blade and high demands on quality for professional use. The blade can be reground several times.

SSttoocckk DDiiaammeetteerr HHoollee ssiizzee QQuuaannttiittyy CCuutt wwiiddtthh// AAnnggllee TTooootthh PPrriicceeNNoo.. mmmm mmmm ooff tteeeetthh bbllaaddee lliiffee sshhaappee

mmmm

205770100 125 20/16/13 16 2.4/1.6 15 Alternately €€22.50205770209 130 20/16/13 16 2.4/1.6 15 Alternatley €€22.50205770308 140 20/16/13 16 2.4/1.6 15 Alternatley €€23.00205770407 152 20/16/15/13 18 2.4/1.6 15 Alternatley €€23.00205770506 152 30 18 2.4/1.6 15 Alternatley €€23.00205770605 155 20/16/12/7 18 2.4/1.6 15 Alternatley €€23.40205770704 160 20/16 18 2.4/1.6 15 Alternatley €€23.40205770803 160 20/16 30 2.4/1.6 10 Alternatley €€26.60

Circular saw blades continued on page 410

Circular saw bladesCircular saw blades with tungsten carbide teeth for cutting and

splitting of all types of wood, and for sawing different types of board. Manufactured with hardened main blade and

high demands on quality for professional use. The blade can be reground several times.

410

Hand Tools


Cutting Tools

SSttoocckk DDiiaammeetteerr HHoollee ssiizzee QQuuaannttiittyy CCuutt wwiiddtthh// AAnnggllee TTooootthh PPrriicceeNNoo.. mmmm mmmm ooff tteeeetthh bbllaaddee lliiffee sshhaappee

mmmm205770902 165 30/20 18 2.4/1.6 15 Alternatley €€23.90205771009 165 30/20 30 2.4/1.6 10 Altenatley €€27.50205771108 165 16 18 2.4/1.6 15 Altenatley €€23.40205771207 165 16 30 2.4/1.6 19 Alternatley €€27.50205771306 170 30 20 2.4/1.6 15 Alternatley €€25.20205771405 180 30/20 24 2.4/1.6 15 Alternatley €€27.50205771504 180 30/20 40 2.4/1.6 10 Altenatley €€30.20205771603 184 30/20/16 24 2.4/1.6 15 Alternatley €€28.80205771702 184 16 40 2.4/1.6 10 Alternatley €€29.30205771801 185 30/20/16 40 2.4/1.6 10 Alternatley €€29.30205771900 190 20/16 24 2.4/1.6 15 Alternatley €€27.50205772007 190 30/20/16 24 2.4/1.6 15 Alternatley €€27.50205772106 190 30/20/16 40 2.4/1.6 10 Alternatley €€30.20205772205 200 30/25/15 24 2.6/1.8 15 Alternatley €€34.20205772304 200 30/25/15 40 2.6/1.8 10 Alternatley €€36.50205772403 204 30 24 2.6/1.7 22 Alternatley €€45.10205772502 210 35/30/25/20 24 2.6/1.8 15 Alternatley €€37.40205772601 216 30 50 2.8/2.0 -5 Triple chip €€46.90205772700 216 30 24 2.8/2.0 10 Alternatley €€44.60205772809 235 35/30/25 40 2.8/2.0 10 Alternatley €€45.10205772908 250 30/20 24 2.8/2.0 15 Alternatley €€52.30205773005 250 30/20 40 2.8/2.0 10 Alternatley €€54.50205773104 254 30/25/20 40 2.8/2.0 10 Alternatley €€55.40205773203 250 30/20 60 2.8/2.0 10 Alternatley €€60.40205773302 300 30 30 3.2/2.2 22 Alternatley €€80.10205773401 300 30 36 2.8/1.9 22 Alternatley €€85.70205773500 300 30 48 2.8/1.9 22 Alternatley €€98.20205773609 300 30 60 2.8/1.9 22 Alternatley €€100.70205773708 305 30 60 2.8/1.9 22 Alternately €€103.30205773807 315 30 30 3.2/2.2 22 Alternatley €€82.00205773906 315 30 48 2.8/1.9 22 Alternatley €€102.60205774003 350 30 36 3.2/2.5 22 Alternatley €€87.00205774102 350 30 42 3.2/2.2 22 Alternatley €€92.00205774201 350 30 56 3.2/2.2 22 Alternatley €€110.10205774300 400 30 40 3.2/2.5 22 Alternatley €€105.80205774409 400 30 48 3.2/2.2 22 Alternatley €€115.10205774508 400 30 64 3.2/2.2 22 Alternatley €€130.80

Circular saw blades continued from page 409

Circular saw blades for cross cutting sawsCircular saw blades with tungsten carbide teeth,

for cross cutting saws.

SSttoocckk DDiiaammeetteerr HHoollee ssiizzee QQuuaannttiittyy CCuutt wwiiddtthh// TTooootthh PPrriicceeNNoo.. mmmm mmmm ooff tteeeetthh bbllaaddee lliiffee sshhaappee

mmmm

205774607 400 30 36 3.5/2.5 Alternatley €€112.00205774706 500 30 44 4.0/2.8 Alternatley €€272.00205774805 600 30 52 4.0/3.0 Alternatley €€355.00205774904 650 30 56 4.0/3.0 Alternatley €€380.00205775000 700 30/35 60 4.0/3.0 Alternatley €€420.00

26 411

Hand Tools


Cutting Tools

Jigsaw blades10 piece Jigsaw blade set

No of blades 3 3 2 2Application Fast, Fine cut in wood, Rip sawing in wood, Fine cut in metal section, s

coarse cut in wood, plywood, chipboard, plywood, chipboard, heet metal with material plywood, chipboard plastic plastic thickness max 4mm

Cutting lengthx width x thickness mm 75x8x1.3 75x8x1.5 50x5x1.0 50x8x1.0No of teeth per inch 6 10 13 21

209730100 €€17.30

Circular sawsInsert rings for reducing the hole diameter of circular saw blades. The ring allows greater flexiblity so one circular saw fits several circular saws.

SSttoocckk DDiimmeennssiioonn TThhiicckknneessss PPrriicceeNNoo.. mmmm mmmm

207430109 20x15 1.4 €€2.50207430208 20x16 1.4 €€2.50207430307 30x15 1.4 €€2.50207430406 30x16 1.9 €€2.50207430505 30x20 1.9 €€2.50207430604 30x22.2 1.5 €€2.50207430703 30x25 1.9 €€2.50207430802 30x25.4 1.5 €€2.50

10 piece Jigsaw blade set

No of blades 4 4 2Application Coarse cut in wood, Wood, plywood, Fine cut in metal section,

plywood, chipboard, chipboard, plastic sheet metal with plastic material thickness max 4mm

Cutting lengthx width x thickness mm 75x8x1.3 65x8x1.0 50x8x1.0No of teeth per inch 8 13 21

209730209 €€18.60

Stock No PRICE

Stock No PRICE

412

Hand Tools


Cutting Tools

Jigsaw bladesJigsaw blades for electric jigsaws. Supplied in packs of 5.

Attachment type for Bosch.

SSttoocckk AApppplliiccaattiioonn MMaatteerriiaall CCuuttttiinngg lleennggtthh xx QQuuaannttiittyy ooff EEqquuaall ttoo PPrriicceeNNoo.. wwiiddtthh xx tthhiicckknneessss tteeeetthh BBoosscchh nnoo..

mmmm ppeerr iinncchh

205900103 Fast, coarse cut in wood, plywood, chipboard Tool steel, ground set teeth 75x8x1.3 6 T144D €€7.90205900400 Fast, coarse cut in wood, plywood, chipboard Tool steel, ground set teeth 125x9x1.3 6 T344D €€13.10205900707 Fine cut in wood, plywood, chipboard, plastic Tool steel, ground teeth, tapered back 75x8x1.5 10 T101B €€9.20205900905 Fast, fine cut in wood, plywood, chipboard, plastic Tool steel, ground teeth, tapered back 75x8x1.5 6 T101D €€9.20205901002 Fast, fine cut in wood and plastic Tool steel, ground teeth, tapered back 105x10x1.5 6 T301DL €€14.10205901101 Fine cut in wood laminate, work tops etc, with

reveresed toothing pattern to prevent chipping on top of the material Tool steel, ground teeth, tapered back 75x8x1.5 10 T101BR €€9.70

205901200 Fine cut in metal section, sheet metal with material thickness max 4mm Bi metal 50x8x1.0 21 T118AF €€9.30

205901309 Fine cut in metal section, sheet metal with material thickness of 3-6mm Bi metal 50x8x1.0 13 T118BF €€9.30

205901408 Wood with brads, plastic strip, aluminium, soft metals with material thickness 5-10mm Bi metal 75x8x1.0 8 T127DF €€14.00

205901507 Fine cut in metal section, sheet metal with material thickness 3-6mm. Sandwich material. Bi metal 100x8x1.0 13 T318BF €€14.40

Jigsaw blades for electric jigsaws. Supplied in packs of 5.

Attachment type for Black & Decker.

SSttoocckk AApppplliiccaattiioonn MMaatteerriiaall CCuuttttiinngg lleennggtthh QQttyy ooff tteeeetthh PPrriicceeNNoo.. xx wwiiddtthh xx tthhiicckknneessss ppeerr iinncchh

mmmm

205901754 Fast, course, cut in wood, plywood, chipboard, plastic Tool steel, milled set teeth 75 x 8 x 1.3 6 €€8.10205901804 Fine cut in wood laminate, work tops with reversed

toothing pattern to prevent chipping on top of the material Tool steel, ground teeth, tapered back 75 x 8 x 1.5 10 €€9.70205901903 Fine cut in metal section,

sheet metal with material thickness max 4mm Bi metal 50 x 8 x 1.0 21 €€14.90

Reciprocating Saw bladesSaw blade for electric jigsaws with tungsten carbide teeth for

materials that are difficult to process. Shank type A for Bosch, etc.(6T141HM). Supplied in display pack of 1 blade.

SSttoocckk CCuuttttiinngg lleennggtthh xx wwiiddtthh PPrriicceeNNoo.. xx tthhiicckknneessss

mmmm

200340107 70 x 8 x 1.3mm €€22.10

26 413

Hand Tools


Cutting Tools

Reciprocating Saw bladesSaw blade made from tool steel for use with electrical powered reciprocating saws for quick sawing in wood. Packed in display packs of 5.

SSttoocckk TToottaall lleennggtthh xx wwiiddtthh TTeeeetthh ppeerr iinncchh PPrriicceeNNoo.. xx tthhiicckknneessss

mmmm

200950103 240 x 19 x 1.5 4/5 €€30.20

SSttoocckk TToottaall lleennggtthh xx wwiiddtthh TTeeeetthh ppeerr iinncchh PPrriicceeNNoo.. xx tthhiicckknneessss mmmm

mmmm

200960102 450 x 50 x 1.3 2 €€89.90

Saw blade with tungsten carbide teeth for use with electric poweredreciprocating saws for sawing brick and non reinforced concrete. Packed in display pack of 1.

Saw blades for use with electric powered reciprocating saws. Packed in display packs of 5.

SSttoocckk SShhaappee AApppplliiccaattiioonn MMaatteerriiaall TToottaall lleennggtthh xx wwiiddtthh TTeeeetthh ppeerr iinncchh PPrriicceeNNoo.. xx tthhiicckknneessss

mmmm

200940104 Normal Metal pipe and bar 3 to 6mm Bi-metal 150 x 19 x 0.9 18 €€17.50200940203 Normal Wood with brads. Metal pipe and bar 5 to 10mm Bi-metal 150 x 19 x 0.9 10/14 €€17.50200940302 Normal Metal pipe and bar 3 to 6mm Bi-metal 200 x 19 x 0.9 18 €€21.30200940401 Normal Wood with brads. Metal pipe and bar 5 to 10mm Bi-metal 200 x 19 x 0.9 10/14 €€21.30200940500 Normal Wood with brads. Metal pipe and bar over 5mm Bi-metal 150 x 19 x 1.3 8/12 €€19.90200940609 Normal Wood with brads. Metal pipe and bar over 5mm Bi-metal 200 x 19 x 1.3 8/12 €€25.30200940708 Normal Wood with brads. Metal pipe and bar over 5mm Bi-metal 300 x 19 x 1.3 8/12 €€35.70200940807 Normal Cast iron Bi-metal 200 x 19 x 1.1 HM cross €€37.80200940906 Tapered tip Demolition, wood with brads, quick sawing Bi-metal 225 x 22 x 1.6 6 €€41.80200941003 Tapered tip Demolition, wood with brads, metal over 5mm Bi-metal 225 x 22 x 1.6 10 €€41.80200941102 Tapered tip Demolition, wood with brads, quick sawing Bi-metal 300 x 22 x 1.6 6 €€51.80200941201 Cone wood and plastic, quick sawing Bi-metal 150 x 19 x 1.3 5/8 €€22.20200941300 Cone wood and plastic, quick sawing Bi-metal 200 x 19 x 1.3 5/8 €€27.80200941409 Cone wood and plastic, quick sawing Bi-metal 300 x 19 x 1.3 5/8 €€38.20

414

Hand Tools


Cutting Tools

Thin extra quality Band saw Blades for woodThin, high quality with profile ground teeth and hardened tooth points,

made from toughened band steel. Special profile for cutting soft metals,particle boards, plastic, laminate, beech, oak and other hard woods.

Supplied directional and ready joined. Setting is left to right type.

SSttoocckk LLeennggtthh SSeerriieess WWiiddtthh TThhiicckknneessss TTooootthh ppiittcchh PPrriicceeNNoo.. mmmm mmmm mmmm mmmm

209570100 1350 61P 6 0.36 4 €€25.40209570209 1430 81P 6 0.36 4 €€26.70209570308 1500 62P 6 0.36 4 €€26.70209570407 1780 64P 6 0.36 4 €€28.10209570506 1815 6 0.36 4 €€29.40209570605 1840 6 0.36 4 €€29.40209570704 1870 65P 6 0.36 4 €€29.40209570803 2120 70P 6 0.36 4 €€30.80209570902 2225 6 0.36 4 €€32.20209571009 2240 6 0.36 4 €€32.20209571108 2296 6 0.36 4 €€32.20209571207 1350 61P 10 0.36 4 €€25.40209571306 1430 81P 10 0.36 4 €€26.70209571405 1500 62P 10 0.36 4 €€26.70209571504 1780 64P 10 0.36 4 €€28.10209571603 1815 10 0.36 4 €€29.40209571702 1840 10 0.36 4 €€29.40209571801 1870 65P 10 0.36 4 €€29.40209571900 2120 70P 10 0.36 4 €€30.80209572007 2225 10 0.36 4 €€32.20209572106 2240 10 0.36 4 €€32.20209572205 2296 10 0.36 4 €€32.20209572254 1350 61P 16 0.36 4 €€27.50209572304 1500 62P 16 0.36 4 €€29.20209572403 1780 64P 16 0.36 4 €€30.80209572502 1840 16 0.36 4 €€32.50209572601 1870 65P 16 0.36 4 €€32.50209572700 2120 70P 16 0.36 4 €€34.20209572809 2225 16 0.36 4 €€35.90209572908 2240 16 0.36 4 €€35.90209573005 2296 1 6 0.36 4 €€35.90

Band Saw Blades for woodHardened tooth points. For solid wood and lighter work in cutting

soft metals, chipboard, plastic, laminate, beech, oak and other hard woods.

Supplied aligned, ready joined and set.

SSttoocckk LLeennggtthh WWiiddtthh TThhiicckknneessss TTooootthh ppiittcchh PPrriicceeNNoo.. mmmm mmmm mmmm mmmm

209980101 1430 4 0.65 1.8 €€18.60209980127 1500 4 0.65 1.8 €€18.90209980150 1870 4 0.65 1.8 €€20.70209980176 2120 4 0.65 4.0 €€21.90209980200 2190 4 0.65 1.8 €€22.30209980226 2650 4 0.65 1.8 €€24.50209980259 1350 6 0.36 4.0 €€17.10209980275 1400 6 0.36 4.0 €€17.30209980309 1500 6 0.36 4.0 €€17.70209980325 1510 6 0.36 4.0 €€17.70209980358 1650 6 0.36 4.0 €€18.30209980374 1710 6 0.36 4.0 €€18.50209980408 1815 6 0.36 4.0 €€18.90209980424 1870 6 0.36 4.0 €€19.20209980457 1900 6 0.36 4.0 €€13.80209980473 2000 6 0.36 4.0 €€14.10209980507 2100 6 0.36 4.0 €€20.10209980523 2120 6 0.36 4.0 €€20.20209980556 2170 6 0.36 4.0 €€20.40209980572 2190 6 0.63 6.0 €€20.40209980606 2240 6 0.63 6.0 €€20.60

Band saw blades for wood continued on page 415

26 415

Hand Tools


Cutting Tools

Band Saw Blades for woodHardened tooth points. For solid wood and lighter work in cuttingsoft metals, chipboard, plastic, laminate, beech, oak and other hard woods. Supplied aligned, ready joined and set.


Band saw blades for wood continued from page 414

209980622 2296 6 0.36 4.0 €€20.90209980655 2360 6 0.63 6.0 €€21.10209980663 2370 6 0.63 6.0 €€18.70209980671 2470 6 0.63 6.0 €€21.50209980705 2490 6 0.63 6.0 €€21.60209980713 2630 6 0.63 6.0 €€20.00209980721 2650 6 0.36 4.0 €€22.30209980754 2810 6 0.63 6.0 €€22.90209980770 2950 6 0.63 6.0 €€23.50209980804 3090 6 0.63 6.0 €€24.00209980820 3150 6 0.63 6.0 €€24.30209980853 3350 6 0.63 6.0 €€25.10209980879 3360 6 0.63 6.0 €€25.10209980903 3410 6 0.63 6.0 €€25.30209980911 3500 6 0.63 6.0 €€25.60209980920 3607 6 0.63 6.0 €€23.50209980929 3634 6 0.63 6.0 €€26.20209980952 3650 6 0.63 6.0 €€26.20209980978 3720 6 0.63 6.0 €€26.60209981000 3900 6 0.63 6.0 €€27.20209981026 4000 6 0.63 6.0 €€27.70209981059 4100 6 0.63 6.0 €€28.10209981075 4240 6 0.63 6.0 €€28.60209981109 4590 6 0.63 6.0 €€30.00209981125 4800 6 0.63 6.0 €€30.80209981158 5020 6 0.63 6.0 €€31.80209981174 1350 10 0.36 4.0 €€17.30209981208 1400 10 0.36 4.0 €€17.50209981224 1500 10 0.36 4.0 €€18.00209981257 1510 10 0.36 4.0 €€18.00209981273 1650 10 0.36 4.0 €€13.30209981307 1710 10 0.36 4.0 €€18.80209981323 1815 10 0.36 4.0 €€19.30209981356 1870 10 0.36 4.0 €€19.50209981372 1900 10 0.36 4.0 €€14.00209981406 2000 10 0.36 4.0 €€20.10209981422 2100 10 0.36 4.0 €€20.50209981455 2120 10 0.36 4.0 €€20.50209981471 2170 10 0.36 4.0 €€20.70209981505 2190 10 0.63 6.0 €€21.00209981521 2240 10 0.63 6.0 €€21.30209981554 2296 10 0.36 4.0 €€21.30209981570 2360 10 0.63 6.0 €€21.80209981596 2370 10 0.63 6.0 €€19.30209981604 2470 10 0.63 6.0 €€22.30209981620 2490 10 0.63 6.0 €€22.30209981638 2630 10 0.63 6.0 €€20.70209981653 2650 10 0.36 4.0 €€22.80209981679 2810 10 0.63 6.0 €€23.70209981703 2950 10 0.63 6.0 €€24.30209981729 3090 10 0.63 6.0 €€24.90209981752 3150 10 0.63 6.0 €€25.10209981778 3350 10 0.63 6.0 €€26.10209981802 3360 10 0.63 6.0 €€26.10209981828 3410 10 0.63 6.0 €€26.30209981836 3500 10 0.63 6.0 €€26.70209981851 3634 10 0.63 6.0 €€27.20209981877 3650 10 0.63 6.0 €€27.30209981901 3720 10 0.63 6.0 €€27.60209981927 3900 10 0.63 6.0 €€28.40209981950 4000 10 0.63 6.0 €€28.80209981976 4100 10 0.63 6.0 €€29.30209982008 4240 10 0.63 6.0 €€29.90209982024 4590 10 0.63 6.0 €€31.30209982057 4800 10 0.63 6.0 €€32.30209982073 5020 10 0.63 6.0 €€33.20209982107 5700 10 0.63 6.0 €€36.10

209982123 1350 16 0.36 4.0 €€21.20209982156 1500 16 0.36 4.0 €€22.10209982172 1650 16 0.36 4.0 €€23.00209982206 1710 16 0.36 4.0 €€23.40209982222 1870 16 0.36 4.0 €€24.30209982255 1900 16 0.36 4.0 €€24.50209982271 2000 16 0.36 4.0 €€25.10209982305 2100 16 0.36 4.0 €€25.80209982321 2120 16 0.36 4.0 €€25.90209982354 2170 16 0.36 4.0 €€26.20209982370 2190 16 0.63 6.0 €€25.90209982404 2240 16 0.63 6.0 €€26.20209982420 2296 16 0.36 4.0 €€27.00209982453 2360 16 0.81 6.0 €€26.90209982479 2470 16 0.81 6.0 €€27.60209982495 2370 16 0.81 6.0 €€23.80209982503 2490 16 0.81 6.0 €€27.70209982511 2630 16 0.81 6.0 €€25.10209982529 2650 16 0.36 4.0 €€29.10209982552 2810 16 0.81 6.0 €€29.70209982578 2950 16 0.81 6.0 €€30.60209982602 3090 16 0.81 6.0 €€31.50209982628 3150 16 0.81 6.0 €€31.80209982651 3350 16 0.81 6.0 €€33.10209982677 3360 16 0.81 6.0 €€33.10209982701 3410 16 0.81 6.0 €€33.40209982719 3607 16 0.81 6.0 €€30.50209982727 3634 16 0.81 6.0 €€34.80209982735 3500 16 0.81 6.0 €€34.00209982750 3650 16 0.81 6.0 €€35.00209982776 3720 16 0.81 6.0 €€35.40209982800 3900 16 0.81 6.0 €€36.50209982826 4000 16 0.81 6.0 €€37.10209982859 4100 16 0.81 6.0 €€37.70209982875 4240 16 0.81 6.0 €€38.60209982909 4590 16 0.81 6.0 €€40.80209982925 4800 16 0.81 6.0 €€42.10209982958 5020 16 0.81 6.0 €€43.40209982974 5700 16 0.81 6.0 €€47.70209982990 2630 19 0.81 6.0 €€26.20209983006 2650 19 0.81 6.0 €€29.90209983022 3360 19 0.81 6.0 €€34.30209983030 3607 19 0.81 6.0 €€31.60209983055 3634 19 0.81 6.0 €€36.10209983063 3500 19 0.81 6.0 €€35.20209983071 3650 19 0.81 6.0 €€36.20209983105 3720 19 0.81 6.0 €€36.60209983121 3900 19 0.81 6.0 €€37.70209983154 4000 19 0.81 6.0 €€38.30209983170 4100 19 0.81 6.0 €€38.90209983204 4240 19 0.81 6.0 €€39.80209983221 4590 19 0.81 6.0 €€42.00209983253 4800 19 0.81 6.0 €€43.30209983279 5020 19 0.81 6.0 €€44.60209983303 5700 19 0.81 6.0 €€48.90209983329 3900 25 0.81 6.0 €€41.80209983352 4800 25 0.81 6.0 €€48.40


clampingtools - bell scott engineering suppliers

Documents